diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/3F69FACDD643 b/SSD/ADATA/IM2/IM2S3134N-064GM/3F69FACDD643 new file mode 100644 index 000000000..c8b047a4b --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/3F69FACDD643 @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 6 20:25:58 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 48170 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 40 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 327684 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 025 025 000 - 4466477529 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 551 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 28 +194 Temperature_Celsius -O---K 051 051 030 - 49 (Min/Max 48/49) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 016 016 005 - 84 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 333590519296 +234 Unknown_Attribute -O--CK 100 100 000 - 470025350336 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 75738316667 +242 Total_LBAs_Read -O--CK 100 100 000 - 11277589012 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (280) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x018 6 75738316667 --- Logical Sectors Written +0x01 0x020 6 1608364279 --- Number of Write Commands +0x01 0x028 6 11277589012 --- Logical Sectors Read +0x01 0x030 6 113923397 --- Number of Read Commands +0x01 0x038 6 173412000000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 104 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 56 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/442FEFEFE98A b/SSD/ADATA/IM2/IM2S3134N-064GM/442FEFEFE98A new file mode 100644 index 000000000..955cd4696 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/442FEFEFE98A @@ -0,0 +1,183 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 8 21:53:42 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 25409 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 97 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 79 +169 Unknown_Attribute PO--C- 100 100 010 - 4295098369 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 151 151 000 - 4342874719 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 099 099 020 - 554 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 67 +194 Temperature_Celsius -O---K 048 048 030 - 52 (Min/Max 49/54) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 080 080 005 - 20 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 82225040640 +234 Unknown_Attribute -O--CK 100 100 000 - 101111079872 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 33364118820 +242 Total_LBAs_Read -O--CK 100 100 000 - 8975133268 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 23367 - +# 2 Short offline Completed without error 00% 23367 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (246) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x018 6 33364118820 --- Logical Sectors Written +0x01 0x020 6 678911852 --- Number of Write Commands +0x01 0x028 6 8975133268 --- Logical Sectors Read +0x01 0x030 6 143263514 --- Number of Read Commands +0x01 0x038 6 91472400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 29 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 79 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 237 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/4F303EB534C3 b/SSD/ADATA/IM2/IM2S3134N-064GM/4F303EB534C3 new file mode 100644 index 000000000..09b18297e --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/4F303EB534C3 @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 18 18:40:57 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2278 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 101 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65537 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 123 123 000 - 4370400139 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 555 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 40 +194 Temperature_Celsius -O---K 050 050 030 - 50 (Min/Max 46/51) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 070 070 005 - 30 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 1014620416 +234 Unknown_Attribute -O--CK 100 100 000 - 1259893376 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 451791205 +242 Total_LBAs_Read -O--CK 100 100 000 - 69552748 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2276 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (16) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 101 --- Lifetime Power-On Resets +0x01 0x018 6 451791205 --- Logical Sectors Written +0x01 0x020 6 13982657 --- Number of Write Commands +0x01 0x028 6 69552748 --- Logical Sectors Read +0x01 0x030 6 2066982 --- Number of Read Commands +0x01 0x038 6 8200800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 46 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 271 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/5005D413066F b/SSD/ADATA/IM2/IM2S3134N-064GM/5005D413066F new file mode 100644 index 000000000..69875a489 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/5005D413066F @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 17 16:56:32 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 30319 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 276 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 134 134 000 - 197633311591 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius -O---K 055 055 030 - 45 (Min/Max 41/47) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 071 071 005 - 29 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 115945136896 +234 Unknown_Attribute -O--CK 100 100 000 - 87726426816 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 63077839053 +242 Total_LBAs_Read -O--CK 100 100 000 - 5988328587 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (129) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 276 --- Lifetime Power-On Resets +0x01 0x018 6 63077839053 --- Logical Sectors Written +0x01 0x020 6 781836284 --- Number of Write Commands +0x01 0x028 6 5988328587 --- Logical Sectors Read +0x01 0x030 6 69253827 --- Number of Read Commands +0x01 0x038 6 109148400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 39 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 756 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/537970B928B9 b/SSD/ADATA/IM2/IM2S3134N-064GM/537970B928B9 new file mode 100644 index 000000000..34bd3f296 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/537970B928B9 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 19 23:48:00 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 21020 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 86 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 150 150 000 - 68768498291 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 61 +194 Temperature_Celsius -O---K 057 057 030 - 43 (Min/Max 42/49) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 080 080 005 - 20 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 83340530944 +234 Unknown_Attribute -O--CK 100 100 000 - 120998713728 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 18903537488 +242 Total_LBAs_Read -O--CK 100 100 000 - 739673889 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (269) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 86 --- Lifetime Power-On Resets +0x01 0x018 6 18903537488 --- Logical Sectors Written +0x01 0x020 6 463591953 --- Number of Write Commands +0x01 0x028 6 739673889 --- Logical Sectors Read +0x01 0x030 6 8641988 --- Number of Read Commands +0x01 0x038 6 75672000000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 29 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 128 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/58745022F3E3 b/SSD/ADATA/IM2/IM2S3134N-064GM/58745022F3E3 new file mode 100644 index 000000000..447cb3690 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/58745022F3E3 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 24 14:37:38 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 654 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 67 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 131074 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 198 198 000 - 4296409097 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 554 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 45 +194 Temperature_Celsius -O---K 058 058 030 - 42 (Min/Max 38/44) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 100 100 005 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 1038461184 +234 Unknown_Attribute -O--CK 100 100 000 - 801914240 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 659464413 +242 Total_LBAs_Read -O--CK 100 100 000 - 1400784326 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (293) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x018 6 659464413 --- Logical Sectors Written +0x01 0x020 6 6970564 --- Number of Write Commands +0x01 0x028 6 1400784326 --- Logical Sectors Read +0x01 0x030 6 10036445 --- Number of Read Commands +0x01 0x038 6 2354400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 86 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/59F8CB244194 b/SSD/ADATA/IM2/IM2S3134N-064GM/59F8CB244194 new file mode 100644 index 000000000..2be778b35 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/59F8CB244194 @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Nov 20 21:30:52 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 23484 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 102 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65537 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 163 163 000 - 8625783201 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 555 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 59 +194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 37/45) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 087 087 005 - 13 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 55422254080 +234 Unknown_Attribute -O--CK 100 100 000 - 46687756672 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 23000355905 +242 Total_LBAs_Read -O--CK 100 100 000 - 888974480 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (470) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x018 6 23000355905 --- Logical Sectors Written +0x01 0x020 6 425011635 --- Number of Write Commands +0x01 0x028 6 888974480 --- Logical Sectors Read +0x01 0x030 6 8079456 --- Number of Read Commands +0x01 0x038 6 84542400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 185 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/5F84E820FE46 b/SSD/ADATA/IM2/IM2S3134N-064GM/5F84E820FE46 new file mode 100644 index 000000000..224602cef --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/5F84E820FE46 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 9 03:12:36 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 26288 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 28 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65537 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 169 169 000 - 4324983115 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 555 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius -O---K 054 054 030 - 46 (Min/Max 45/46) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 089 089 005 - 11 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 43851795456 +234 Unknown_Attribute -O--CK 100 100 000 - 41269965824 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 16107743889 +242 Total_LBAs_Read -O--CK 100 100 000 - 1260523656 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (49) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x018 6 16107743889 --- Logical Sectors Written +0x01 0x020 6 404889799 --- Number of Write Commands +0x01 0x028 6 1260523656 --- Logical Sectors Read +0x01 0x030 6 11620896 --- Number of Read Commands +0x01 0x038 6 94636800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 83 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/60D16711C70C b/SSD/ADATA/IM2/IM2S3134N-064GM/60D16711C70C new file mode 100644 index 000000000..e8ef50cd9 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/60D16711C70C @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 16:14:43 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20414 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 88 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65537 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 164 164 000 - 17215062428 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 555 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 54 +194 Temperature_Celsius -O---K 056 056 030 - 44 (Min/Max 31/44) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 087 087 005 - 13 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 54710377984 +234 Unknown_Attribute -O--CK 100 100 000 - 78305498240 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 15181871576 +242 Total_LBAs_Read -O--CK 100 100 000 - 4197567202 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (340) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 88 --- Lifetime Power-On Resets +0x01 0x018 6 15181871576 --- Logical Sectors Written +0x01 0x020 6 346217671 --- Number of Write Commands +0x01 0x028 6 4197567202 --- Logical Sectors Read +0x01 0x030 6 41328268 --- Number of Read Commands +0x01 0x038 6 73490400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 255 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/6679B17AECFE b/SSD/ADATA/IM2/IM2S3134N-064GM/6679B17AECFE new file mode 100644 index 000000000..82be3190f --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/6679B17AECFE @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 08:57:25 2025 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34887 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 105 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65537 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 001 001 000 - 4542959163 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 555 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 82 +194 Temperature_Celsius -O---K 059 059 030 - 41 (Min/Max 41/46) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 010 010 005 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 488636527104 +234 Unknown_Attribute -O--CK 100 100 000 - 852821399488 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 76885488482 +242 Total_LBAs_Read -O--CK 100 100 000 - 15389922375 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (18) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x018 6 76885488482 --- Logical Sectors Written +0x01 0x020 6 1819417199 --- Number of Write Commands +0x01 0x028 6 15389922375 --- Logical Sectors Read +0x01 0x030 6 227749830 --- Number of Read Commands +0x01 0x038 6 125593200000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 151 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 144 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/7D73E764EFE7 b/SSD/ADATA/IM2/IM2S3134N-064GM/7D73E764EFE7 new file mode 100644 index 000000000..d09702844 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/7D73E764EFE7 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 12 17:11:27 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20797 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 61 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 112 112 000 - 4380689575 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 52 +194 Temperature_Celsius -O---K 056 056 030 - 44 (Min/Max 41/47) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 061 061 005 - 39 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 158074469376 +234 Unknown_Attribute -O--CK 100 100 000 - 249461704512 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 40557916358 +242 Total_LBAs_Read -O--CK 100 100 000 - 13276864211 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (44) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 61 --- Lifetime Power-On Resets +0x01 0x018 6 40557916358 --- Logical Sectors Written +0x01 0x020 6 758536359 --- Number of Write Commands +0x01 0x028 6 13276864211 --- Logical Sectors Read +0x01 0x030 6 176318517 --- Number of Read Commands +0x01 0x038 6 74869200000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 52 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 112 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/82B032CFC964 b/SSD/ADATA/IM2/IM2S3134N-064GM/82B032CFC964 new file mode 100644 index 000000000..9297994bf --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/82B032CFC964 @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 24 01:00:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 29267 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 135 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65537 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 173 173 000 - 4321313044 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 555 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 67 +194 Temperature_Celsius -O---K 053 053 030 - 47 (Min/Max 45/52) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 091 091 005 - 9 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 36951682560 +234 Unknown_Attribute -O--CK 100 100 000 - 33753395776 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 12740749746 +242 Total_LBAs_Read -O--CK 100 100 000 - 891375261 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (408) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 135 --- Lifetime Power-On Resets +0x01 0x018 6 12740749746 --- Logical Sectors Written +0x01 0x020 6 352370195 --- Number of Write Commands +0x01 0x028 6 891375261 --- Logical Sectors Read +0x01 0x030 6 7168630 --- Number of Read Commands +0x01 0x038 6 105361200000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 222 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/88DFBF0039FD b/SSD/ADATA/IM2/IM2S3134N-064GM/88DFBF0039FD new file mode 100644 index 000000000..88bc79122 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/88DFBF0039FD @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 14 16:43:41 2025 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 35566 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 84 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 117 117 000 - 4375643219 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 64 +194 Temperature_Celsius -O---K 054 054 030 - 46 (Min/Max 39/52) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 064 064 005 - 36 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 147281157888 +234 Unknown_Attribute -O--CK 100 100 000 - 195114978432 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 41174602547 +242 Total_LBAs_Read -O--CK 100 100 000 - 8043328562 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (309) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 84 --- Lifetime Power-On Resets +0x01 0x018 6 41174602547 --- Logical Sectors Written +0x01 0x020 6 585821991 --- Number of Write Commands +0x01 0x028 6 8043328562 --- Logical Sectors Read +0x01 0x030 6 54107863 --- Number of Read Commands +0x01 0x038 6 128037600000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 49 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 185 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/96E90D92D406 b/SSD/ADATA/IM2/IM2S3134N-064GM/96E90D92D406 new file mode 100644 index 000000000..2500670cb --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/96E90D92D406 @@ -0,0 +1,184 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 20 13:36:50 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 50133 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 39 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 067 067 000 - 4425123669 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius -O---K 051 051 030 - 49 (Min/Max 28/49) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 038 038 005 - 62 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 249088060672 +234 Unknown_Attribute -O--CK 100 100 000 - 348406799232 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 63013782048 +242 Total_LBAs_Read -O--CK 100 100 000 - 7599982369 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 50131 - +# 2 Short offline Completed without error 00% 50130 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (403) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 39 --- Lifetime Power-On Resets +0x01 0x018 6 63013782048 --- Logical Sectors Written +0x01 0x020 6 1009825512 --- Number of Write Commands +0x01 0x028 6 7599982369 --- Logical Sectors Read +0x01 0x030 6 81542895 --- Number of Read Commands +0x01 0x038 6 180478800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 79 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 122 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/99B0F8BCAA9B b/SSD/ADATA/IM2/IM2S3134N-064GM/99B0F8BCAA9B new file mode 100644 index 000000000..cc963ba5b --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/99B0F8BCAA9B @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 13 15:59:49 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 46519 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 64 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 001 001 000 - 17386507241 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 42 +194 Temperature_Celsius -O---K 046 046 030 - 54 (Min/Max 47/60) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 010 010 005 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 404884917760 +234 Unknown_Attribute -O--CK 100 100 000 - 624399906688 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 66389703899 +242 Total_LBAs_Read -O--CK 100 100 000 - 11520287534 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (162) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x018 6 66389703899 --- Logical Sectors Written +0x01 0x020 6 1340300196 --- Number of Write Commands +0x01 0x028 6 11520287534 --- Logical Sectors Read +0x01 0x030 6 141246406 --- Number of Read Commands +0x01 0x038 6 167468400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 126 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 98 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/B301AB4187A8 b/SSD/ADATA/IM2/IM2S3134N-064GM/B301AB4187A8 new file mode 100644 index 000000000..d40da6cad --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/B301AB4187A8 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 16 01:01:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 25024 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 99 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 136 136 000 - 8652391227 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius -O---K 055 055 030 - 45 (Min/Max 43/50) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 073 073 005 - 27 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 109801839872 +234 Unknown_Attribute -O--CK 100 100 000 - 130194501568 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 31455293319 +242 Total_LBAs_Read -O--CK 100 100 000 - 4247685427 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24948 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (11) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 99 --- Lifetime Power-On Resets +0x01 0x018 6 31455293319 --- Logical Sectors Written +0x01 0x020 6 885473040 --- Number of Write Commands +0x01 0x028 6 4247685427 --- Logical Sectors Read +0x01 0x030 6 47792343 --- Number of Read Commands +0x01 0x038 6 90086400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 38 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 214 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/BADC3DBA330F b/SSD/ADATA/IM2/IM2S3134N-064GM/BADC3DBA330F new file mode 100644 index 000000000..62947b6af --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/BADC3DBA330F @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 1 10:25:01 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 43200 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 78 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 096 096 000 - 8691844504 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 45 +194 Temperature_Celsius -O---K 055 055 030 - 45 (Min/Max 44/48) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 053 053 005 - 47 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 191163880960 +234 Unknown_Attribute -O--CK 100 100 000 - 261318278336 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 43200939490 +242 Total_LBAs_Read -O--CK 100 100 000 - 2687965036 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (249) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 78 --- Lifetime Power-On Resets +0x01 0x018 6 43200939490 --- Logical Sectors Written +0x01 0x020 6 823933764 --- Number of Write Commands +0x01 0x028 6 2687965036 --- Logical Sectors Read +0x01 0x030 6 13872586 --- Number of Read Commands +0x01 0x038 6 155520000000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 62 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 100 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/C1778ECE38A4 b/SSD/ADATA/IM2/IM2S3134N-064GM/C1778ECE38A4 new file mode 100644 index 000000000..1b0479846 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/C1778ECE38A4 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 17 22:13:02 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 51208 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 49 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 038 038 000 - 670173694214 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 13 +194 Temperature_Celsius -O---K 062 062 030 - 38 (Min/Max 38/42) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 023 023 005 - 77 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 305960704256 +234 Unknown_Attribute -O--CK 100 100 000 - 265984976256 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 293698747336 +242 Total_LBAs_Read -O--CK 100 100 000 - 48249783570 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (357) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x018 6 293698747336 --- Logical Sectors Written +0x01 0x020 6 3976626027 --- Number of Write Commands +0x01 0x028 6 48249783570 --- Logical Sectors Read +0x01 0x030 6 348710301 --- Number of Read Commands +0x01 0x038 6 184348800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 96 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 181 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/C3F3FA0FC968 b/SSD/ADATA/IM2/IM2S3134N-064GM/C3F3FA0FC968 new file mode 100644 index 000000000..3e4bba7a1 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/C3F3FA0FC968 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 09:49:15 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7376 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 57 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 184 184 000 - 4310040683 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 38 +194 Temperature_Celsius -O---K 052 052 030 - 48 (Min/Max 35/49) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 097 097 005 - 3 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 14061168384 +234 Unknown_Attribute -O--CK 100 100 000 - 10864176512 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 6396105102 +242 Total_LBAs_Read -O--CK 100 100 000 - 492402642 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (442) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 57 --- Lifetime Power-On Resets +0x01 0x018 6 6396105102 --- Logical Sectors Written +0x01 0x020 6 110241454 --- Number of Write Commands +0x01 0x028 6 492402642 --- Logical Sectors Read +0x01 0x030 6 3702258 --- Number of Read Commands +0x01 0x038 6 26553600000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 107 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3134N-064GM/D048598CAD6A b/SSD/ADATA/IM2/IM2S3134N-064GM/D048598CAD6A new file mode 100644 index 000000000..481ded6b0 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3134N-064GM/D048598CAD6A @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3134N-064GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.8E +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 14 21:05:05 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34182 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 120 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 112 112 000 - 4381213859 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 556 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 91 +194 Temperature_Celsius -O---K 054 054 030 - 46 (Min/Max 43/47) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 061 061 005 - 39 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 158197184256 +234 Unknown_Attribute -O--CK 100 100 000 - 232504878592 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 46647307431 +242 Total_LBAs_Read -O--CK 100 100 000 - 6924765709 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (157) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 120 --- Lifetime Power-On Resets +0x01 0x018 6 46647307431 --- Logical Sectors Written +0x01 0x020 6 936716685 --- Number of Write Commands +0x01 0x028 6 6924765709 --- Logical Sectors Read +0x01 0x030 6 98441778 --- Number of Read Commands +0x01 0x038 6 123055200000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 52 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 172 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3168-064GD/F436DCB5C8B6 b/SSD/ADATA/IM2/IM2S3168-064GD/F436DCB5C8B6 new file mode 100644 index 000000000..8933d80b1 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3168-064GD/F436DCB5C8B6 @@ -0,0 +1,175 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3168-064GD +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: S180223a +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Dec 21 20:45:26 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 948 + 12 Power_Cycle_Count -O--C- 100 100 000 - 242 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 099 099 010 - 1048580 +173 Unknown_Attribute -O--C- 200 200 000 - 21477064717 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 2532 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 210 +194 Temperature_Celsius -O---K 070 070 030 - 30 (Min/Max 30/60) +231 Unknown_SSD_Attribute PO--CK 100 100 005 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 1608312512 +234 Unknown_Attribute -O--CK 100 100 000 - 438485760 +241 Total_LBAs_Written -O--CK 100 100 000 - 1330708501 +242 Total_LBAs_Read -O--CK 100 100 000 - 1060325875 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/40 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (377) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 242 --- Lifetime Power-On Resets +0x01 0x010 4 948 --- Power-on Hours +0x01 0x018 6 1330708501 --- Logical Sectors Written +0x01 0x020 6 14964098 --- Number of Write Commands +0x01 0x028 6 1060325875 --- Logical Sectors Read +0x01 0x030 6 15026988 --- Number of Read Commands +0x01 0x038 6 875291966088 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IM2/IM2S3168-128GD/27077FDD4DCC b/SSD/ADATA/IM2/IM2S3168-128GD/27077FDD4DCC new file mode 100644 index 000000000..9b79c81a9 --- /dev/null +++ b/SSD/ADATA/IM2/IM2S3168-128GD/27077FDD4DCC @@ -0,0 +1,176 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_IM2S3168-128GD +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: S180718z +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 7 14:38:35 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 20288 + 12 Power_Cycle_Count -O--C- 100 100 000 - 33 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 098 098 010 - 4194320 +173 Unknown_Attribute -O--C- 200 200 000 - 154653753668 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 5032 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 22 +194 Temperature_Celsius -O---K 042 042 030 - 58 (Min/Max 24/86) +231 Unknown_SSD_Attribute PO--CK 099 099 005 - 1 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 89201622592 +234 Unknown_Attribute -O--CK 100 100 000 - 118917771520 +241 Total_LBAs_Written -O--CK 100 100 000 - 34555189050 +242 Total_LBAs_Read -O--CK 100 100 000 - 36489399588 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 62 Celsius +Power Cycle Min/Max Temperature: ?/71 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (467) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 20288 --- Power-on Hours +0x01 0x018 6 34555189050 --- Logical Sectors Written +0x01 0x020 6 838549207 --- Number of Write Commands +0x01 0x028 6 36489399588 --- Logical Sectors Read +0x01 0x030 6 50846945 --- Number of Read Commands +0x01 0x038 6 18696015548256 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/IMSS332/IMSS332-032GM/F218570C8381 b/SSD/ADATA/IMSS332/IMSS332-032GM/F218570C8381 new file mode 100644 index 000000000..ad9ac7ae3 --- /dev/null +++ b/SSD/ADATA/IMSS332/IMSS332-032GM/F218570C8381 @@ -0,0 +1,203 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA_IMSS332-032GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: O1026A +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 13 05:53:26 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 864 + 12 Power_Cycle_Count ------ 100 100 000 - 109 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 159 +163 Initial_Bad_Block_Count ------ 100 100 000 - 5 +164 Total_Erase_Count ------ 100 100 000 - 1425617 +165 Max_Erase_Count ------ 100 100 000 - 773 +166 Min_Erase_Count ------ 100 100 000 - 642 +167 Average_Erase_Count ------ 100 100 000 - 681 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 78 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 19775 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 9 +194 Temperature_Celsius ------ 100 100 000 - 44 +195 Hardware_ECC_Recovered ------ 100 100 000 - 26 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 138375 +242 Host_Reads_32MiB ------ 100 100 000 - 111384 +245 TLC_Writes_32MiB ------ 100 100 000 - 712808 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (121) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 109 --- Lifetime Power-On Resets +0x01 0x010 4 864 --- Power-on Hours +0x01 0x018 6 478621198 --- Logical Sectors Written +0x01 0x020 6 166167125 --- Number of Write Commands +0x01 0x028 6 3004733006 --- Logical Sectors Read +0x01 0x030 6 132103485 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 9 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 528 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 22 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/ISSS332/ISSS332-128GM/6F8B5486AB63 b/SSD/ADATA/ISSS332/ISSS332-128GM/6F8B5486AB63 new file mode 100644 index 000000000..8659b17bc --- /dev/null +++ b/SSD/ADATA/ISSS332/ISSS332-128GM/6F8B5486AB63 @@ -0,0 +1,202 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_ISSS332-128GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: O1026A +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 8 11:41:48 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 2319 + 12 Power_Cycle_Count ------ 100 100 000 - 56 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 159 +163 Unknown_Attribute ------ 100 100 000 - 6 +164 Unknown_Attribute ------ 100 100 000 - 1731433 +165 Unknown_Attribute ------ 100 100 000 - 875 +166 Unknown_Attribute ------ 100 100 000 - 773 +167 Unknown_Attribute ------ 100 100 000 - 827 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 73 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 2257 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 21 +194 Temperature_Celsius ------ 100 100 000 - 42 +195 Hardware_ECC_Recovered ------ 100 100 000 - 236 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 3167224 +242 Total_LBAs_Read ------ 100 100 000 - 3593 +245 Unknown_Attribute ------ 100 100 000 - 3462866 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/42 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (80) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 56 --- Lifetime Power-On Resets +0x01 0x010 4 2319 --- Power-on Hours +0x01 0x018 6 1408793389 --- Logical Sectors Written +0x01 0x020 6 558958967 --- Number of Write Commands +0x01 0x028 6 235504601 --- Logical Sectors Read +0x01 0x030 6 1113454 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 21 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 163 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/ISSS332/ISSS332-128GM/CC02A5EBF075 b/SSD/ADATA/ISSS332/ISSS332-128GM/CC02A5EBF075 new file mode 100644 index 000000000..2dad025ee --- /dev/null +++ b/SSD/ADATA/ISSS332/ISSS332-128GM/CC02A5EBF075 @@ -0,0 +1,204 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA_ISSS332-128GM +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: O1026A +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 8 11:41:48 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 2319 + 12 Power_Cycle_Count ------ 100 100 000 - 56 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 152 +163 Unknown_Attribute ------ 100 100 000 - 13 +164 Unknown_Attribute ------ 100 100 000 - 1706304 +165 Unknown_Attribute ------ 100 100 000 - 865 +166 Unknown_Attribute ------ 100 100 000 - 763 +167 Unknown_Attribute ------ 100 100 000 - 818 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 73 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 2234 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 22 +194 Temperature_Celsius ------ 100 100 000 - 42 +195 Hardware_ECC_Recovered ------ 100 100 000 - 133 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 3 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 3136234 +242 Total_LBAs_Read ------ 100 100 000 - 35876 +245 Unknown_Attribute ------ 100 100 000 - 3412608 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/42 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (80) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 56 --- Lifetime Power-On Resets +0x01 0x010 4 2319 --- Power-on Hours +0x01 0x018 6 3672793729 --- Logical Sectors Written +0x01 0x020 6 556323818 --- Number of Write Commands +0x01 0x028 6 2351233502 --- Logical Sectors Read +0x01 0x030 6 4504660 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 22 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 162 --- Number of Hardware Resets +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SP550/SP550 240GB/094F8FD871A1 b/SSD/ADATA/SP550/SP550 240GB/094F8FD871A1 new file mode 100644 index 000000000..e24335b4c --- /dev/null +++ b/SSD/ADATA/SP550/SP550 240GB/094F8FD871A1 @@ -0,0 +1,195 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SP550 +Serial Number: -- +Firmware Version: P0705AB +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 24 05:00:12 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 849 + 12 Power_Cycle_Count ------ 100 100 000 - 1126 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 32 +163 Initial_Bad_Block_Count ------ 100 100 000 - 266 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 169751 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 2321 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 2137 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 2293 +164 Total_Erase_Count ------ 100 100 000 - 57579 +165 Max_Erase_Count ------ 100 100 000 - 86 +166 Min_Erase_Count ------ 100 100 000 - 11 +167 Average_Erase_Count ------ 100 100 000 - 44 +169 Remaining_Lifetime_Perc ------ 100 100 001 - 96 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 78 +194 Temperature_Celsius ------ 100 100 070 - 20 (29 27 28 28 0) +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 236142 +242 Host_Reads_32MiB ------ 100 100 000 - 293543 +245 TLC_Writes_32MiB ------ 100 100 000 - 340075 +246 SLC_Writes_32MiB ------ 100 100 000 - 339502 +247 Raid_Recoverty_Ct ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (0) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1126 --- Lifetime Power-On Resets +0x01 0x010 4 849 --- Power-on Hours +0x01 0x018 6 2590948409 --- Logical Sectors Written +0x01 0x020 6 212708734 --- Number of Write Commands +0x01 0x028 6 2057783811 --- Logical Sectors Read +0x01 0x030 6 234812324 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 78 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2800 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SP550/SP550 240GB/0A95557F2EB3 b/SSD/ADATA/SP550/SP550 240GB/0A95557F2EB3 new file mode 100644 index 000000000..6b47d9897 --- /dev/null +++ b/SSD/ADATA/SP550/SP550 240GB/0A95557F2EB3 @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SP550 +Serial Number: -- +Firmware Version: P0121AA +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 31 09:17:53 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 1392 + 12 Power_Cycle_Count ------ 100 100 000 - 768 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 38 +163 Initial_Bad_Block_Count ------ 100 100 000 - 186 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 338350 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 4927 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 4731 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 4903 +164 Total_Erase_Count ------ 100 100 000 - 80957 +165 Max_Erase_Count ------ 100 100 000 - 82 +166 Min_Erase_Count ------ 100 100 000 - 22 +167 Average_Erase_Count ------ 100 100 000 - 62 +169 Remaining_Lifetime_Perc ------ 100 100 001 - 94 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 212 +194 Temperature_Celsius ------ 100 100 070 - 27 (36 37 35 34 0) +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 591535 +242 Host_Reads_32MiB ------ 100 100 000 - 188613 +245 TLC_Writes_32MiB ------ 100 100 000 - 478152 +246 SLC_Writes_32MiB ------ 100 100 000 - 676700 +247 Raid_Recoverty_Ct ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (0) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 768 --- Lifetime Power-On Resets +0x01 0x010 4 1392 --- Power-on Hours +0x01 0x018 6 112148311 --- Logical Sectors Written +0x01 0x020 6 415857342 --- Number of Write Commands +0x01 0x028 6 3771024292 --- Logical Sectors Read +0x01 0x030 6 196175419 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 213 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1057 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SP550/SP550 240GB/CFF1DF59507C b/SSD/ADATA/SP550/SP550 240GB/CFF1DF59507C new file mode 100644 index 000000000..d0344f902 --- /dev/null +++ b/SSD/ADATA/SP550/SP550 240GB/CFF1DF59507C @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SP550 +Serial Number: -- +Firmware Version: O0730A +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 16 09:39:25 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1], Master PW ID: 0xfa74 + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0xe8) Offline data collection activity + is in a Vendor Specific state. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (25600) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 852 + 12 Power_Cycle_Count ------ 100 100 000 - 13014 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 172 +163 Initial_Bad_Block_Count ------ 100 100 000 - 48 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 17466 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 182 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 15 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 167 +164 Total_Erase_Count ------ 100 100 000 - 179727 +165 Max_Erase_Count ------ 100 100 000 - 137 +166 Min_Erase_Count ------ 100 100 000 - 41 +167 Average_Erase_Count ------ 100 100 000 - 92 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000 +169 Remaining_Lifetime_Perc ------ 000 000 000 - 0 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 21 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 398 +194 Temperature_Celsius ------ 100 100 000 - 64 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 22 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 852 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 3002643834427523218 1054784650282115694 Not_testing + 2 14500465313249897602 12783054145963431950 Not_testing + 3 2497261878169457265 5758691636163480278 Not_testing + 4 7955757143120424584 11574308389411464970 Not_testing + 5 11729639703799509010 9413370541623216806 Not_testing + 6 2193823533675155747 2193823533675221282 Read_scanning is in a Vendor Specific state +Selective self-test flags (0xa2a6): + After scanning selected spans, read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 29580 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 52/68 Celsius +Lifetime Min/Max Temperature: 52/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (59) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13014 --- Lifetime Power-On Resets +0x01 0x010 4 852 --- Power-on Hours +0x01 0x018 6 3787257992 --- Logical Sectors Written +0x01 0x020 6 1123045997 --- Number of Write Commands +0x01 0x028 6 300170714 --- Logical Sectors Read +0x01 0x030 6 234253444 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 23499327 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6658 --- Number of Hardware Resets +0x06 0x018 4 22 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SP600/SP600 128GB/EADEDE7321C9 b/SSD/ADATA/SP600/SP600 128GB/EADEDE7321C9 new file mode 100644 index 000000000..078ca053f --- /dev/null +++ b/SSD/ADATA/SP600/SP600 128GB/EADEDE7321C9 @@ -0,0 +1,177 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron/Maxiotek based SSDs +Device Model: ADATA SP600 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 2.9 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 17 00:54:17 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Unknown_JMF_Attribute POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_JMF_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_JMF_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 40436 + 10 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 6919 +167 Unknown_JMF_Attribute -O---K 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 3058 +169 Unknown_JMF_Attribute PO--C- 100 100 010 - 1572868 +170 Bad_Block_Count PO--C- 100 100 010 - 0 0 0 +173 Erase_Count -O--C- 173 173 000 - 208 668 518 +175 Bad_Cluster_Table_Count PO--C- 100 100 010 - 0 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 100 +194 Temperature_Celsius -O---K 070 070 030 - 30 (Min/Max 24/40) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Invalid Error Log index = 0x0000 (reserved = 0x00) +Device Error Count: 256 (possibly also invalid) + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (335) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 6919 --- Lifetime Power-On Resets +0x01 0x018 6 38872527231 --- Logical Sectors Written +0x01 0x020 6 722807640 --- Number of Write Commands +0x01 0x028 6 35509688668 --- Logical Sectors Read +0x01 0x030 6 594205289 --- Number of Read Commands +0x01 0x038 6 145569600000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 26 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 242 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 140 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SP900/SP900 256GB/07B562BDE8C8 b/SSD/ADATA/SP900/SP900 256GB/07B562BDE8C8 new file mode 100644 index 000000000..f6afb312b --- /dev/null +++ b/SSD/ADATA/SP900/SP900 256GB/07B562BDE8C8 @@ -0,0 +1,185 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: ADATA SP900 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 5.0.7b +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 10:05:02 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 1/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 4 + 9 Power_On_Hours_and_Msec -O--CK 021 021 000 - 69851h+44m+28.640s + 12 Power_Cycle_Count -O--CK 100 100 000 - 102 +171 Program_Fail_Count -O--CK 000 000 000 - 2 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 45 +177 Wear_Range_Delta ------ 000 000 000 - 14 +181 Program_Fail_Count -O--CK 000 000 000 - 2 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 046 059 000 - 46 (Min/Max 17/59) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 1/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 4 +201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 1/0 +204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 1/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 093 093 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 66652 +234 SandForce_Internal -O--CK 000 000 000 - 41551 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 41551 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 16961 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 44/47 Celsius +Lifetime Min/Max Temperature: 17/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 78/116 Celsius +Min/Max Temperature Limit: -72/-26 Celsius +Temperature History Size (Index): 23061 (117) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 69851 --- Power-on Hours +0x01 0x018 6 87139708164 --- Logical Sectors Written +0x01 0x028 6 35570480119 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 874 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 874 --- Number of Hardware Resets +0x06 0x010 4 793 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/ADATA/SP900/SP900 256GB/2A098EEAD41D b/SSD/ADATA/SP900/SP900 256GB/2A098EEAD41D new file mode 100644 index 000000000..50d2164a4 --- /dev/null +++ b/SSD/ADATA/SP900/SP900 256GB/2A098EEAD41D @@ -0,0 +1,187 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: ADATA SP900 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 5.0.7a +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 10:05:02 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 023 023 000 - 67927h+50m+13.580s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1542 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 97 +177 Wear_Range_Delta ------ 000 000 000 - 10 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 047 054 000 - 47 (Min/Max 11/54) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 095 095 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 78303 +234 SandForce_Internal -O--CK 000 000 000 - 55782 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 55782 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 31424 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 46/49 Celsius +Lifetime Min/Max Temperature: 11/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: -44/112 Celsius +Min/Max Temperature Limit: 119/-3 Celsius +Temperature History Size (Index): 2082 (337) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1542 --- Lifetime Power-On Resets +0x01 0x010 4 67927 --- Power-on Hours +0x01 0x018 6 116983870960 --- Logical Sectors Written +0x01 0x028 6 65901278100 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4879 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4879 --- Number of Hardware Resets +0x06 0x010 4 4037 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 1 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 29 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/ADATA/SP900/SP900 256GB/7E8B7AFA47C8 b/SSD/ADATA/SP900/SP900 256GB/7E8B7AFA47C8 new file mode 100644 index 000000000..56949a2ff --- /dev/null +++ b/SSD/ADATA/SP900/SP900 256GB/7E8B7AFA47C8 @@ -0,0 +1,187 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: ADATA SP900 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 5.0.7b +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 10:05:02 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 027 027 000 - 64577h+53m+57.210s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2468 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 75 +177 Wear_Range_Delta ------ 000 000 000 - 16 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 045 055 000 - 45 (Min/Max 10/55) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 095 095 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 53293 +234 SandForce_Internal -O--CK 000 000 000 - 29018 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 29018 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 19930 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 43/46 Celsius +Lifetime Min/Max Temperature: 10/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: -48/118 Celsius +Min/Max Temperature Limit: -99/-115 Celsius +Temperature History Size (Index): 37659 (460) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2468 --- Lifetime Power-On Resets +0x01 0x010 4 64577 --- Power-on Hours +0x01 0x018 6 60855523598 --- Logical Sectors Written +0x01 0x028 6 41798142030 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10070 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10070 --- Number of Hardware Resets +0x06 0x010 4 9717 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/ADATA/SP900/SP900 256GB/96B0E89E969E b/SSD/ADATA/SP900/SP900 256GB/96B0E89E969E new file mode 100644 index 000000000..13c9c9107 --- /dev/null +++ b/SSD/ADATA/SP900/SP900 256GB/96B0E89E969E @@ -0,0 +1,168 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: ADATA SP900 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 5.0.4 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 10:05:02 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 89685h+45m+47.890s + 12 Power_Cycle_Count -O--CK 100 100 000 - 169 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 53 +177 Wear_Range_Delta ------ 000 000 000 - 12 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 045 045 000 - 45 (Min/Max 16/45) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 089 089 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 100241 +234 SandForce_Internal -O--CK 000 000 000 - 67688 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 67688 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 26939 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 44/45 Celsius +Lifetime Min/Max Temperature: 16/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: -73/118 Celsius +Min/Max Temperature Limit: -11/ 6 Celsius +Temperature History Size (Index): 58112 (137) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/ADATA/SP920/SP920SS 128GB/5E3B38CFFF37 b/SSD/ADATA/SP920/SP920SS 128GB/5E3B38CFFF37 new file mode 100644 index 000000000..5752db997 --- /dev/null +++ b/SSD/ADATA/SP920/SP920SS 128GB/5E3B38CFFF37 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SP920SS +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 1.12 +User Capacity: 128,035,675,648 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 16 21:53:25 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 000 - 4403 + 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10221 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1325 +174 Unknown_Attribute ----CK 100 100 000 - 22 +177 Wear_Leveling_Count ------ 100 100 000 - 8 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 052 052 000 - 52 (Min/Max 0/52) +195 Hardware_ECC_Recovered --SRC- 100 100 000 - 70585 +231 Unknown_SSD_Attribute PO--C- 097 097 010 - 0 +233 Media_Wearout_Indicator ------ 000 000 000 - 14407740 +234 Unknown_Attribute -O--CK 000 000 000 - 30917369 +241 Total_LBAs_Written -O--CK 000 000 000 - 12052361 +242 Total_LBAs_Read -O--CK 000 000 000 - 23405007 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1325 --- Lifetime Power-On Resets +0x01 0x018 6 24104172259053 --- Logical Sectors Written +0x01 0x020 6 24010 --- Number of Write Commands +0x01 0x028 6 46808944346847 --- Logical Sectors Read +0x01 0x030 6 23341 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU630/SU630 240GB/55C7E258681B b/SSD/ADATA/SU630/SU630 240GB/55C7E258681B new file mode 100644 index 000000000..2642ab8b6 --- /dev/null +++ b/SSD/ADATA/SU630/SU630 240GB/55C7E258681B @@ -0,0 +1,166 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 i386] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU630 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R0242 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Apr 3 10:08:40 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1702 + 12 Power_Cycle_Count -O--CK 100 100 000 - 882 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 10 +164 Total_Erase_Count -O--CK 100 100 000 - 18617 +165 Max_Erase_Count -O--CK 100 100 000 - 26 +166 Min_Erase_Count -O--CK 100 100 000 - 6 +167 Average_Erase_Count -O--CK 100 100 000 - 13 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 55853 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 80 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 18 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 39 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 80 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 120 +194 Temperature_Celsius -O--CK 100 100 000 - 42 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 95351 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 26262 +242 Host_Reads_32MiB -O--CK 100 100 000 - 29656 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 145799 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 882 --- Lifetime Power-On Resets +0x01 0x010 4 1702 --- Power-on Hours +0x01 0x018 6 1721127468 --- Logical Sectors Written +0x01 0x020 6 35567151 --- Number of Write Commands +0x01 0x028 6 1943593120 --- Logical Sectors Read +0x01 0x030 6 28173798 --- Number of Read Commands +0x01 0x038 6 6126622260 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1227 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU630/SU630 240GB/72C30CA84221 b/SSD/ADATA/SU630/SU630 240GB/72C30CA84221 new file mode 100644 index 000000000..ce43c3fe2 --- /dev/null +++ b/SSD/ADATA/SU630/SU630 240GB/72C30CA84221 @@ -0,0 +1,185 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU630 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R0242 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 11:00:39 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27732 + 12 Power_Cycle_Count -O--CK 100 100 000 - 185 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 1 +164 Total_Erase_Count -O--CK 100 100 000 - 334800 +165 Max_Erase_Count -O--CK 100 100 000 - 278 +166 Min_Erase_Count -O--CK 100 100 000 - 180 +167 Average_Erase_Count -O--CK 100 100 000 - 236 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 1004400 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 834 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 542 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 709 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 834 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 95 +177 Wear_Leveling_Count -O--CK 100 100 000 - 61 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 105 +194 Temperature_Celsius -O--CK 100 100 000 - 35 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 653915 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 658831 +242 Host_Reads_32MiB -O--CK 100 100 000 - 173134 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 1978561 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25498 - +# 2 Short offline Completed without error 00% 4580 - +# 3 Short offline Completed without error 00% 4412 - +# 4 Short offline Completed without error 00% 4244 - +# 5 Short offline Completed without error 00% 4076 - +# 6 Short offline Completed without error 00% 3908 - +# 7 Short offline Completed without error 00% 3740 - +# 8 Short offline Completed without error 00% 3572 - +# 9 Short offline Completed without error 00% 3406 - +#10 Short offline Completed without error 00% 3286 - +#11 Short offline Completed without error 00% 3070 - +#12 Short offline Completed without error 00% 2902 - +#13 Short offline Completed without error 00% 2734 - +#14 Short offline Completed without error 00% 2638 - +#15 Short offline Completed without error 00% 2398 - +#16 Short offline Completed without error 00% 2229 - +#17 Short offline Completed without error 00% 2065 - +#18 Short offline Completed without error 00% 2039 - +#19 Short offline Completed without error 00% 332 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 185 --- Lifetime Power-On Resets +0x01 0x010 4 27732 --- Power-on Hours +0x01 0x018 6 43177187080 --- Logical Sectors Written +0x01 0x020 6 791996259 --- Number of Write Commands +0x01 0x028 6 11346541791 --- Logical Sectors Read +0x01 0x030 6 182031905 --- Number of Read Commands +0x01 0x038 6 99673297718 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 847 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU630/SU630 240GB/B4A22FA8F05F b/SSD/ADATA/SU630/SU630 240GB/B4A22FA8F05F new file mode 100644 index 000000000..4357fb3a2 --- /dev/null +++ b/SSD/ADATA/SU630/SU630 240GB/B4A22FA8F05F @@ -0,0 +1,174 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 16.0-CURRENT-HBSD amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU630 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: S210608c +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 18 17:33:25 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4538 + 12 Power_Cycle_Count -O--C- 100 100 000 - 805 +167 Average_Erase_Count -O---K 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 0 +169 Remaining_Lifetime_Perc PO--C- 099 099 010 - 262152 +173 Unknown_Attribute -O--C- 200 200 000 - 30068178963 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 336 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 164 +194 Temperature_Celsius -O---K 067 067 030 - 33 (Min/Max 25/39) +231 SSD_Life_Left PO--CK 099 099 005 - 1 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 1250 +234 Unknown_Attribute -O--CK 100 100 000 - 23373 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1026 +242 Host_Reads_32MiB -O--CK 100 100 000 - 35 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (135) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 805 --- Lifetime Power-On Resets +0x01 0x010 4 4538 --- Power-on Hours +0x01 0x018 6 2153551882 --- Logical Sectors Written +0x01 0x020 6 19780514 --- Number of Write Commands +0x01 0x028 6 73846918 --- Logical Sectors Read +0x01 0x030 6 2378975 --- Number of Read Commands +0x01 0x038 6 4178142173524 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU630/SU630 240GB/CB3D2ABEA74F b/SSD/ADATA/SU630/SU630 240GB/CB3D2ABEA74F new file mode 100644 index 000000000..b63ad6cdd --- /dev/null +++ b/SSD/ADATA/SU630/SU630 240GB/CB3D2ABEA74F @@ -0,0 +1,106 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU630 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R6308 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Sep 23 16:27:45 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6529 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 136 +160 Uncorrectable_Error_Cnt 0x0032 100 100 050 Old_age Always - 0 +161 Valid_Spare_Block_Cnt 0x0032 100 100 050 Old_age Always - 100 +163 Initial_Bad_Block_Count 0x0032 100 100 000 Old_age Always - 25 +164 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 19502 +165 Max_Erase_Count 0x0032 100 100 000 Old_age Always - 82 +166 Min_Erase_Count 0x0032 100 100 000 Old_age Always - 6 +167 Average_Erase_Count 0x0032 100 100 000 Old_age Always - 36 +148 Total_SLC_Erase_Ct 0x0032 100 100 000 Old_age Always - 58506 +149 Max_SLC_Erase_Ct 0x0032 100 100 000 Old_age Always - 247 +150 Min_SLC_Erase_Ct 0x0032 100 100 000 Old_age Always - 20 +151 Average_SLC_Erase_Ct 0x0032 100 100 000 Old_age Always - 109 +159 DRAM_1_Bit_Error_Count 0x0032 100 100 000 Old_age Always - 0 +168 Max_Erase_Count_of_Spec 0x0032 100 100 000 Old_age Always - 247 +169 Remaining_Lifetime_Perc 0x0032 100 100 000 Old_age Always - 99 +177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 197 +181 Program_Fail_Cnt_Total 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 71 +194 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 29 +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 000 Old_age Always - 100 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 194144 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 215835 +245 TLC_Writes_32MiB 0x0032 100 100 000 Old_age Always - 266886 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/ADATA/SU630/SU630 960GB/EA91007AB714 b/SSD/ADATA/SU630/SU630 960GB/EA91007AB714 new file mode 100644 index 000000000..ac1da54eb --- /dev/null +++ b/SSD/ADATA/SU630/SU630 960GB/EA91007AB714 @@ -0,0 +1,204 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU630 +Serial Number: -- +Firmware Version: R1210A0 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Nov 19 13:55:30 2025 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 13 + 9 Power_On_Hours -O--CK 100 100 050 - 19462 + 12 Power_Cycle_Count -O--CK 100 100 050 - 2243 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 80 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 18 +164 Total_Erase_Count -O--CK 100 100 050 - 144776 +165 Max_Erase_Count -O--CK 100 100 050 - 1186 +166 Min_Erase_Count -O--CK 100 100 050 - 43 +167 Average_Erase_Count -O--CK 100 100 050 - 205 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 1500 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 87 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 13 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 235 +194 Temperature_Celsius -O---K 100 100 050 - 48 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 1417655 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 13 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 2 +232 Available_Reservd_Space -O--CK 100 100 050 - 80 +241 Host_Writes_32MiB ----CK 100 100 050 - 26655 +242 Host_Reads_32MiB ----CK 100 100 050 - 16255 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 85250 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + 2f 00 00 01 01 00 00 00 00 00 03 00 08 00:00:00.000 READ LOG EXT + 2f 00 00 01 01 00 00 00 00 00 00 00 08 00:00:00.000 READ LOG EXT + b0 00 d5 01 01 00 00 4f 00 c2 00 00 08 00:00:00.000 SMART READ LOG + b0 00 da 00 00 00 00 4f 00 c2 00 00 08 00:00:00.000 SMART RETURN STATUS + +Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 48 00 00 0f 00 04 88 00 00 00:00:00.000 WRITE FPDMA QUEUED + 61 00 00 00 c8 00 00 10 00 04 88 00 00 00:00:00.000 WRITE FPDMA QUEUED + 61 00 00 00 c8 00 00 10 00 04 88 00 00 00:00:00.000 WRITE FPDMA QUEUED + 61 00 08 00 50 00 00 2b 00 01 48 00 00 00:00:00.000 WRITE FPDMA QUEUED + 61 00 00 00 c8 00 00 10 00 04 88 00 00 00:00:00.000 WRITE FPDMA QUEUED + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18435 - +# 2 Extended offline Completed without error 00% 17869 - +# 3 Extended offline Completed without error 00% 12388 - +# 4 Short offline Completed without error 00% 12388 - +# 5 Short offline Interrupted (host reset) 90% 9410 - +# 6 Extended offline Interrupted (host reset) 70% 8862 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2243 --- Lifetime Power-On Resets +0x01 0x010 4 19462 --- Power-on Hours +0x01 0x018 6 65503075 --- Logical Sectors Written +0x01 0x020 6 781625441 --- Number of Write Commands +0x01 0x028 6 4026230090 --- Logical Sectors Read +0x01 0x030 6 338081204 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ADATA/SU650/SU650 120GB/0D0E05AE998F b/SSD/ADATA/SU650/SU650 120GB/0D0E05AE998F new file mode 100644 index 000000000..b7e784f25 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/0D0E05AE998F @@ -0,0 +1,186 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8X01c45 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Jun 20 16:24:41 2025 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 11) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7439 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1768 +161 Valid_Spare_Block_Cnt -O--CK 100 100 000 - 9 +162 Cache_Block_Count -O--CK 100 100 000 - 329406 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 100 +164 Total_Erase_Count -O--CK 100 100 000 - 694 +166 Min_Erase_Count -O--CK 100 100 000 - 98 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 0 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 162 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 675033008 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 43 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 611 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 730 +232 Available_Reservd_Space -O--CK 100 100 000 - 96 +241 Host_Writes_32MiB -O--CK 100 100 000 - 20303 +242 Host_Reads_32MiB -O--CK 100 100 000 - 49390 +249 Unkn_SiliconMotion_Attr -O--CK 100 100 000 - 7719 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 23840 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1768 --- Lifetime Power-On Resets +0x01 0x010 4 7439 --- Power-on Hours +0x01 0x018 6 42580383072 --- Logical Sectors Written +0x01 0x020 6 651390520 --- Number of Write Commands +0x01 0x028 6 103580322238 --- Logical Sectors Read +0x01 0x030 6 2256769607 --- Number of Read Commands +0x01 0x038 6 26778775160 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 31 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8404 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 56 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 120GB/34BBC0062A34 b/SSD/ADATA/SU650/SU650 120GB/34BBC0062A34 new file mode 100644 index 000000000..1772b5a74 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/34BBC0062A34 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R3C0A +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 24 12:51:15 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 924 + 12 Power_Cycle_Count -O--CK 100 100 000 - 34 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 128 +164 Total_Erase_Count -O--CK 100 100 000 - 164875 +165 Max_Erase_Count -O--CK 100 100 000 - 387 +166 Min_Erase_Count -O--CK 100 100 000 - 299 +167 Average_Erase_Count -O--CK 100 100 000 - 346 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 494625 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 1163 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 898 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 1038 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 1163 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 89 +177 Wear_Leveling_Count -O--CK 100 100 000 - 2165 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 29 +194 Temperature_Celsius -O--CK 100 100 000 - 38 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 276304 +242 Host_Reads_32MiB -O--CK 100 100 000 - 903 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 1286463 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 924 --- Power-on Hours +0x01 0x018 6 18107912281 --- Logical Sectors Written +0x01 0x020 6 134220079 --- Number of Write Commands +0x01 0x028 6 59223321 --- Logical Sectors Read +0x01 0x030 6 1840364 --- Number of Read Commands +0x01 0x038 6 3326572212 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 123 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 17 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 120GB/4C1563C6CECF b/SSD/ADATA/SU650/SU650 120GB/4C1563C6CECF new file mode 100644 index 000000000..a5a297074 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/4C1563C6CECF @@ -0,0 +1,166 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R840H +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 31 04:37:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 655 + 12 Power_Cycle_Count -O--CK 100 100 000 - 764 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 8 +164 Total_Erase_Count -O--CK 100 100 000 - 22016 +165 Max_Erase_Count -O--CK 100 100 000 - 49 +166 Min_Erase_Count -O--CK 100 100 000 - 35 +167 Average_Erase_Count -O--CK 100 100 000 - 42 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 66050 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 149 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 107 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 126 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 149 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 99 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 176 +194 Temperature_Celsius -O--CK 100 100 000 - 35 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 122504 +242 Host_Reads_32MiB -O--CK 100 100 000 - 69787 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 177755 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 764 --- Lifetime Power-On Resets +0x01 0x010 4 655 --- Power-on Hours +0x01 0x018 6 8028449986 --- Logical Sectors Written +0x01 0x020 6 106113133 --- Number of Write Commands +0x01 0x028 6 4573585623 --- Logical Sectors Read +0x01 0x030 6 59440660 --- Number of Read Commands +0x01 0x038 6 2357469531 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2093 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 120GB/58E23DCE1ECE b/SSD/ADATA/SU650/SU650 120GB/58E23DCE1ECE new file mode 100644 index 000000000..996747ec8 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/58E23DCE1ECE @@ -0,0 +1,189 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8X14c18 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Feb 22 23:08:16 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 11) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15620 + 12 Power_Cycle_Count -O--CK 100 100 000 - 205 +161 Valid_Spare_Block_Cnt -O--CK 100 100 000 - 0 +162 Cache_Block_Count -O--CK 100 100 000 - 82912 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 3000 +164 Total_Erase_Count -O--CK 100 100 000 - 59 +166 Min_Erase_Count -O--CK 100 100 000 - 13 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 0 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 99 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 186 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 571422 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 42 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 10 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 89 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 829 +241 Host_Writes_32MiB -O--CK 100 100 000 - 6580 +242 Host_Reads_32MiB -O--CK 100 100 000 - 224 +249 Unkn_SiliconMotion_Attr -O--CK 100 100 000 - 822 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 7206 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6765 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 205 --- Lifetime Power-On Resets +0x01 0x010 4 15620 --- Power-on Hours +0x01 0x018 6 13799572579 --- Logical Sectors Written +0x01 0x020 6 200612473 --- Number of Write Commands +0x01 0x028 6 470076896 --- Logical Sectors Read +0x01 0x030 6 7933756 --- Number of Read Commands +0x01 0x038 6 56229846566 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 615 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 120GB/689DA3CB9974 b/SSD/ADATA/SU650/SU650 120GB/689DA3CB9974 new file mode 100644 index 000000000..df7ffaaef --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/689DA3CB9974 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R840H +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Dec 29 18:56:27 2025 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 889 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 8 +164 Total_Erase_Count -O--CK 100 100 000 - 7495 +165 Max_Erase_Count -O--CK 100 100 000 - 20 +166 Min_Erase_Count -O--CK 100 100 000 - 9 +167 Average_Erase_Count -O--CK 100 100 000 - 14 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 22485 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 62 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 29 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 42 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 62 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 24 +194 Temperature_Celsius -O--CK 100 100 000 - 77 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 23120 +242 Host_Reads_32MiB -O--CK 100 100 000 - 2998 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 63725 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 889 --- Power-on Hours +0x01 0x018 6 1515220421 --- Logical Sectors Written +0x01 0x020 6 13495191 --- Number of Write Commands +0x01 0x028 6 196534222 --- Logical Sectors Read +0x01 0x030 6 5202914 --- Number of Read Commands +0x01 0x038 6 3189470765 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 68 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 120GB/80F420E9D196 b/SSD/ADATA/SU650/SU650 120GB/80F420E9D196 new file mode 100644 index 000000000..5f8190de4 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/80F420E9D196 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +Firmware Version: V1220B0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 8 23:46:32 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 173 + 12 Power_Cycle_Count -O--CK 100 100 050 - 21 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 32 +164 Total_Erase_Count -O--CK 100 100 050 - 474 +165 Max_Erase_Count -O--CK 100 100 050 - 1 +166 Min_Erase_Count -O--CK 100 100 050 - 0 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 5050 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 19 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 804 +242 Host_Reads_32MiB ----CK 100 100 050 - 81 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 362 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 26/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 173 --- Power-on Hours +0x01 0x018 6 52719835 --- Logical Sectors Written +0x01 0x020 6 1011136 --- Number of Write Commands +0x01 0x028 6 5341789 --- Logical Sectors Read +0x01 0x030 6 172557 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 120GB/970069E51869 b/SSD/ADATA/SU650/SU650 120GB/970069E51869 new file mode 100644 index 000000000..0385ac2a7 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/970069E51869 @@ -0,0 +1,179 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: P180516a +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 4 14:32:40 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 47132 + 12 Power_Cycle_Count -O--C- 100 100 000 - 26 +167 Average_Erase_Count -O---K 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 0 +169 Remaining_Lifetime_Perc PO--C- 090 090 010 - 9437220 +173 Unknown_Attribute -O--C- 200 200 000 - 2675816465093 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 1448 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius -O---K 076 076 030 - 24 (Min/Max 0/48) +231 SSD_Life_Left PO--CK 053 053 005 - 47 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 390729371264 +234 Unknown_Attribute -O--CK 100 100 000 - 213521886144 +241 Host_Writes_32MiB -O--CK 100 100 000 - 26543198702 +242 Host_Reads_32MiB -O--CK 100 100 000 - 649029810 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: ?/48 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (444) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 47132 --- Power-on Hours +0x01 0x018 6 26543198702 --- Logical Sectors Written +0x01 0x020 6 920463665 --- Number of Write Commands +0x01 0x028 6 649029810 --- Logical Sectors Read +0x01 0x030 6 4778046 --- Number of Read Commands +0x01 0x038 6 43057743224456 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 113 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 46 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SU650/SU650 120GB/AB0D1E050576 b/SSD/ADATA/SU650/SU650 120GB/AB0D1E050576 new file mode 100644 index 000000000..e5639e38c --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/AB0D1E050576 @@ -0,0 +1,109 @@ +smartctl 7.4 2023-08-01 r5530 [DragonFly 6.4-RELEASE x86_64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: ZD0R3G5P +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jun 1 11:14:58 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1197 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 641 +161 Valid_Spare_Block_Cnt 0x0032 100 100 050 Old_age Always - 53 +162 Cache_Block_Count 0x0032 100 100 000 Old_age Always - 16724 +163 Initial_Bad_Block_Count 0x0032 100 100 000 Old_age Always - 3000 +164 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 10 +166 Min_Erase_Count 0x0032 100 100 000 Old_age Always - 302 +167 Average_Erase_Count 0x0032 100 100 000 Old_age Always - 0 +168 Max_Erase_Count_of_Spec 0x0032 100 100 000 Old_age Always - 0 +169 Remaining_Lifetime_Perc 0x0032 100 100 000 Old_age Always - 51 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 106 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 1724455 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +206 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 1 +207 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 38 +232 Available_Reservd_Space 0x0032 100 100 000 Old_age Always - 50 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 527 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 58 +249 Unkn_SiliconMotion_Attr 0x0032 100 100 000 Old_age Always - 401 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 623 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/ADATA/SU650/SU650 120GB/EF37392B8E83 b/SSD/ADATA/SU650/SU650 120GB/EF37392B8E83 new file mode 100644 index 000000000..9177036a1 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/EF37392B8E83 @@ -0,0 +1,190 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8X01c45 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 17 16:33:52 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 11) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7755 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4555 +161 Valid_Spare_Block_Cnt -O--CK 100 100 000 - 0 +162 Cache_Block_Count -O--CK 100 100 000 - 252192 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 100 +164 Total_Erase_Count -O--CK 100 100 000 - 543 +166 Min_Erase_Count -O--CK 100 100 000 - 122 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 0 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 1564 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 288404798 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 53 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 437 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 574 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 14979 +242 Host_Reads_32MiB -O--CK 100 100 000 - 23576 +249 Unkn_SiliconMotion_Attr -O--CK 100 100 000 - 7434 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 17382 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6202 - +# 2 Short offline Completed without error 00% 5561 - +# 3 Short offline Completed without error 00% 4855 - +# 4 Short offline Completed without error 00% 4553 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4555 --- Lifetime Power-On Resets +0x01 0x010 4 7755 --- Power-on Hours +0x01 0x018 6 31414865876 --- Logical Sectors Written +0x01 0x020 6 441900566 --- Number of Write Commands +0x01 0x028 6 49444141534 --- Logical Sectors Read +0x01 0x030 6 778620486 --- Number of Read Commands +0x01 0x038 6 27912596496 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 16144 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 27874 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 165 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 240GB/2C406690DD99 b/SSD/ADATA/SU650/SU650 240GB/2C406690DD99 new file mode 100644 index 000000000..b609376cd --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/2C406690DD99 @@ -0,0 +1,189 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-CURRENT amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8X04c12 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 8 19:15:22 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 7) minutes. +Extended self-test routine +recommended polling time: ( 23) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7820 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4178 +161 Valid_Spare_Block_Cnt -O--CK 100 100 000 - 5 +162 Cache_Block_Count -O--CK 100 100 000 - 18591 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 3000 +164 Total_Erase_Count -O--CK 100 100 000 - 38 +166 Min_Erase_Count -O--CK 100 100 000 - 141 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 0 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 795 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 6999823 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 39 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 116291 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 19 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 45 +232 Available_Reservd_Space -O--CK 100 100 000 - 99 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 647 +241 Host_Writes_32MiB -O--CK 100 100 000 - 5305 +242 Host_Reads_32MiB -O--CK 100 100 000 - 8609 +249 Unkn_SiliconMotion_Attr -O--CK 100 100 000 - 5307 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 5480 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4178 --- Lifetime Power-On Resets +0x01 0x010 4 7820 --- Power-on Hours +0x01 0x018 6 11125941476 --- Logical Sectors Written +0x01 0x020 6 57824467 --- Number of Write Commands +0x01 0x028 6 18054603933 --- Logical Sectors Read +0x01 0x030 6 106759823 --- Number of Read Commands +0x01 0x038 6 28150671681 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9077 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ADATA/SU650/SU650 240GB/4D9AB50A38C1 b/SSD/ADATA/SU650/SU650 240GB/4D9AB50A38C1 new file mode 100644 index 000000000..56a46e588 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/4D9AB50A38C1 @@ -0,0 +1,186 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8X01c55 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 25 00:43:40 2025 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 7) minutes. +Extended self-test routine +recommended polling time: ( 23) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2768 + 12 Power_Cycle_Count -O--CK 100 100 000 - 847 +161 Valid_Spare_Block_Cnt -O--CK 100 100 000 - 3 +162 Cache_Block_Count -O--CK 100 100 000 - 113366 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 100 +164 Total_Erase_Count -O--CK 100 100 000 - 244 +166 Min_Erase_Count -O--CK 100 100 000 - 135 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 0 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 78 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 148698466 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 54 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 161 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 282 +232 Available_Reservd_Space -O--CK 100 100 000 - 98 +241 Host_Writes_32MiB -O--CK 100 100 000 - 16602 +242 Host_Reads_32MiB -O--CK 100 100 000 - 9354 +249 Unkn_SiliconMotion_Attr -O--CK 100 100 000 - 2852 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 18680 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 847 --- Lifetime Power-On Resets +0x01 0x010 4 2768 --- Power-on Hours +0x01 0x018 6 34818703232 --- Logical Sectors Written +0x01 0x020 6 284937680 --- Number of Write Commands +0x01 0x028 6 19618300665 --- Logical Sectors Read +0x01 0x030 6 251244814 --- Number of Read Commands +0x01 0x038 6 9964299024 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8531 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 219 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 48 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 240GB/50079C3D09C0 b/SSD/ADATA/SU650/SU650 240GB/50079C3D09C0 new file mode 100644 index 000000000..16492a9b1 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/50079C3D09C0 @@ -0,0 +1,166 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R3C0F +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 17 07:45:47 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2552 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 34 +164 Total_Erase_Count -O--CK 100 100 000 - 6505 +165 Max_Erase_Count -O--CK 100 100 000 - 7 +166 Min_Erase_Count -O--CK 100 100 000 - 2 +167 Average_Erase_Count -O--CK 100 100 000 - 5 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 19516 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 23 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 7 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 17 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 23 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 21 +194 Temperature_Celsius -O--CK 100 100 000 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 40516 +242 Host_Reads_32MiB -O--CK 100 100 000 - 13768 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 51182 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1062 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 2552 --- Power-on Hours +0x01 0x018 6 2655281785 --- Logical Sectors Written +0x01 0x020 6 43433045 --- Number of Write Commands +0x01 0x028 6 902351155 --- Logical Sectors Read +0x01 0x030 6 8541709 --- Number of Read Commands +0x01 0x038 6 9179919460 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 427 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 43 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 240GB/5F90AD99DAF8 b/SSD/ADATA/SU650/SU650 240GB/5F90AD99DAF8 new file mode 100644 index 000000000..f2091a20d --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/5F90AD99DAF8 @@ -0,0 +1,108 @@ +smartctl 7.3 2022-02-28 r5338 [NetBSD 10.1_STABLE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8X04c26 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Apr 14 21:47:23 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10759 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 278 +161 Valid_Spare_Block_Cnt 0x0032 100 100 000 Old_age Always - 0 +162 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3652 +163 Initial_Bad_Block_Count 0x0032 100 100 000 Old_age Always - 3000 +164 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 7 +166 Min_Erase_Count 0x0032 100 100 000 Old_age Always - 58 +167 Average_Erase_Count 0x0032 100 100 050 Old_age Always - 0 +168 Max_Erase_Count_of_Spec 0x0032 100 100 000 Old_age Always - 0 +169 Remaining_Lifetime_Perc 0x0032 100 100 000 Old_age Always - 100 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 67 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 6333737 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 100 100 030 Old_age Always - 29 +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 9567 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +206 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +207 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 15 +232 Available_Reservd_Space 0x0032 100 100 000 Old_age Always - 100 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 380 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 1385 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 767 +249 Unkn_SiliconMotion_Attr 0x0032 100 100 000 Old_age Always - 1039 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 1595 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/ADATA/SU650/SU650 240GB/926C6842D06E b/SSD/ADATA/SU650/SU650 240GB/926C6842D06E new file mode 100644 index 000000000..1fe46dd10 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/926C6842D06E @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R3C0F +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jun 5 23:07:10 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 481 + 12 Power_Cycle_Count -O--CK 100 100 000 - 126 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 10 +164 Total_Erase_Count -O--CK 100 100 000 - 5732 +165 Max_Erase_Count -O--CK 100 100 000 - 19 +166 Min_Erase_Count -O--CK 100 100 000 - 6 +167 Average_Erase_Count -O--CK 100 100 000 - 11 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 17198 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 58 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 19 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 35 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 58 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 64 +194 Temperature_Celsius -O--CK 100 100 000 - 10 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 42761 +242 Host_Reads_32MiB -O--CK 100 100 000 - 19522 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 108682 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 126 --- Lifetime Power-On Resets +0x01 0x010 4 481 --- Power-on Hours +0x01 0x018 6 2802422762 --- Logical Sectors Written +0x01 0x020 6 14316043 --- Number of Write Commands +0x01 0x028 6 1279401423 --- Logical Sectors Read +0x01 0x030 6 8212069 --- Number of Read Commands +0x01 0x038 6 1727840462 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 792 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 240GB/BBCB7D34E3A1 b/SSD/ADATA/SU650/SU650 240GB/BBCB7D34E3A1 new file mode 100644 index 000000000..c8dddc178 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/BBCB7D34E3A1 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +Firmware Version: W0411A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Feb 15 00:43:05 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6 + 12 Power_Cycle_Count -O--CK 100 100 050 - 22 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 6 +164 Total_Erase_Count -O--CK 100 100 050 - 72 +165 Max_Erase_Count -O--CK 100 100 050 - 1 +166 Min_Erase_Count -O--CK 100 100 050 - 0 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 3808 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 720 +242 Host_Reads_32MiB ----CK 100 100 050 - 196 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 36 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 22/51 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 6 --- Power-on Hours +0x01 0x018 6 47201840 --- Logical Sectors Written +0x01 0x020 6 445233 --- Number of Write Commands +0x01 0x028 6 12867723 --- Logical Sectors Read +0x01 0x030 6 160650 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 240GB/E44FC4EEF90F b/SSD/ADATA/SU650/SU650 240GB/E44FC4EEF90F new file mode 100644 index 000000000..b2a701345 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/E44FC4EEF90F @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R01D2 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 20 00:54:48 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 7) minutes. +Extended self-test routine +recommended polling time: ( 23) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 914 + 12 Power_Cycle_Count -O--CK 100 100 000 - 508 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 135 +164 Total_Erase_Count -O--CK 100 100 000 - 5347 +165 Max_Erase_Count -O--CK 100 100 000 - 16 +166 Min_Erase_Count -O--CK 100 100 000 - 0 +167 Average_Erase_Count -O--CK 100 100 000 - 8 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 16042 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 48 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 1 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 24 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 48 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 53 +194 Temperature_Celsius -O--CK 100 100 000 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 52598 +242 Host_Reads_32MiB -O--CK 100 100 000 - 88906 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 75010 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 508 --- Lifetime Power-On Resets +0x01 0x010 4 914 --- Power-on Hours +0x01 0x018 6 3447075792 --- Logical Sectors Written +0x01 0x020 6 57050956 --- Number of Write Commands +0x01 0x028 6 5826556655 --- Logical Sectors Read +0x01 0x030 6 78323513 --- Number of Read Commands +0x01 0x038 6 3289293119 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1528 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 240GB/F6A362C33F6F b/SSD/ADATA/SU650/SU650 240GB/F6A362C33F6F new file mode 100644 index 000000000..1cfe958e0 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 240GB/F6A362C33F6F @@ -0,0 +1,175 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: P180831a +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 20 13:50:19 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 4716 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2878 +167 Average_Erase_Count -O---K 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 2 +169 Remaining_Lifetime_Perc PO--C- 087 087 010 - 13369395 +173 Unknown_Attribute -O--C- 200 200 000 - 287769493588 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 1388 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 152 +194 Temperature_Celsius -O---K 070 070 030 - 30 (Min/Max 9/62) +231 SSD_Life_Left PO--CK 095 095 005 - 5 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 39917252608 +234 Unknown_Attribute -O--CK 100 100 000 - 39519980800 +241 Host_Writes_32MiB -O--CK 100 100 000 - 21235189460 +242 Host_Reads_32MiB -O--CK 100 100 000 - 17291778005 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (325) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2878 --- Lifetime Power-On Resets +0x01 0x010 4 4716 --- Power-on Hours +0x01 0x018 6 21235189460 --- Logical Sectors Written +0x01 0x020 6 380898367 --- Number of Write Commands +0x01 0x028 6 17291778005 --- Logical Sectors Read +0x01 0x030 6 367866296 --- Number of Read Commands +0x01 0x038 6 4346304831468 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 2 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SU650/SU650 256GB/54F78B3A9DE4 b/SSD/ADATA/SU650/SU650 256GB/54F78B3A9DE4 new file mode 100644 index 000000000..a3fec8992 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 256GB/54F78B3A9DE4 @@ -0,0 +1,166 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R840H +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 18 19:52:52 2025 NZDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4761 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 25 +164 Total_Erase_Count -O--CK 100 100 000 - 4181 +165 Max_Erase_Count -O--CK 100 100 000 - 8 +166 Min_Erase_Count -O--CK 100 100 000 - 4 +167 Average_Erase_Count -O--CK 100 100 000 - 7 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 12544 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 25 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 14 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 23 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 25 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 23 +194 Temperature_Celsius -O--CK 100 100 000 - 11 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 63689 +242 Host_Reads_32MiB -O--CK 100 100 000 - 315 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 68582 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 4761 --- Power-on Hours +0x01 0x018 6 4173937214 --- Logical Sectors Written +0x01 0x020 6 63543003 --- Number of Write Commands +0x01 0x028 6 20678680 --- Logical Sectors Read +0x01 0x030 6 1791272 --- Number of Read Commands +0x01 0x038 6 17139285735 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 70 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 256GB/7DBBC685B3BC b/SSD/ADATA/SU650/SU650 256GB/7DBBC685B3BC new file mode 100644 index 000000000..e70e3c213 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 256GB/7DBBC685B3BC @@ -0,0 +1,162 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 16.0-CURRENT-HBSD amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +Firmware Version: X0411B0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 18 17:33:25 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 23 + 12 Power_Cycle_Count -O--CK 100 100 050 - 12 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 42 +164 Total_Erase_Count -O--CK 100 100 050 - 46 +165 Max_Erase_Count -O--CK 100 100 050 - 1 +166 Min_Erase_Count -O--CK 100 100 050 - 0 +167 Average_Erase_Count -O--CK 100 100 050 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 5050 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 9 +194 Temperature_Celsius -O---K 100 100 050 - 32 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 259 +242 Host_Reads_32MiB ----CK 100 100 050 - 123 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 18/34 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 23 --- Power-on Hours +0x01 0x018 6 17010885 --- Logical Sectors Written +0x01 0x020 6 185451 --- Number of Write Commands +0x01 0x028 6 8087084 --- Logical Sectors Read +0x01 0x030 6 213118 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ADATA/SU650/SU650 480GB/24465B108171 b/SSD/ADATA/SU650/SU650 480GB/24465B108171 new file mode 100644 index 000000000..3e8f591af --- /dev/null +++ b/SSD/ADATA/SU650/SU650 480GB/24465B108171 @@ -0,0 +1,161 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +Firmware Version: W0413A0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Apr 25 20:39:31 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10524 + 12 Power_Cycle_Count -O--CK 100 100 050 - 60 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 9 +164 Total_Erase_Count -O--CK 100 100 050 - 350214 +165 Max_Erase_Count -O--CK 100 100 050 - 1655 +166 Min_Erase_Count -O--CK 100 100 050 - 1553 +167 Average_Erase_Count -O--CK 100 100 050 - 1606 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 3808 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 58 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 49 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 1777011 +242 Host_Reads_32MiB ----CK 100 100 050 - 8667 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 8362693 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 25/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 60 --- Lifetime Power-On Resets +0x01 0x010 4 10524 --- Power-on Hours +0x01 0x018 6 494098001 --- Logical Sectors Written +0x01 0x020 6 1433891808 --- Number of Write Commands +0x01 0x028 6 568065611 --- Logical Sectors Read +0x01 0x030 6 8917109 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 55 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 100 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU650/SU650 480GB/E5F0974DE534 b/SSD/ADATA/SU650/SU650 480GB/E5F0974DE534 new file mode 100644 index 000000000..ac3817a4f --- /dev/null +++ b/SSD/ADATA/SU650/SU650 480GB/E5F0974DE534 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +Firmware Version: W0413A0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Apr 25 20:39:31 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 1 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 2 + 9 Power_On_Hours -O--CK 100 100 050 - 10481 + 12 Power_Cycle_Count -O--CK 100 100 050 - 60 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 92 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 7 +164 Total_Erase_Count -O--CK 100 100 050 - 282682 +165 Max_Erase_Count -O--CK 100 100 050 - 1367 +166 Min_Erase_Count -O--CK 100 100 050 - 1264 +167 Average_Erase_Count -O--CK 100 100 050 - 1314 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 3808 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 66 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 2 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 49 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 2 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 92 +241 Host_Writes_32MiB ----CK 100 100 050 - 1715463 +242 Host_Reads_32MiB ----CK 100 100 050 - 9059 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 6782327 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 25/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 60 --- Lifetime Power-On Resets +0x01 0x010 4 10481 --- Power-on Hours +0x01 0x018 6 755483307 --- Logical Sectors Written +0x01 0x020 6 1443541216 --- Number of Write Commands +0x01 0x028 6 593711238 --- Logical Sectors Read +0x01 0x030 6 9316878 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 46 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 83 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ADATA/SU650/SU650NS38 256GB/B5E76710E6E0 b/SSD/ADATA/SU650/SU650NS38 256GB/B5E76710E6E0 new file mode 100644 index 000000000..4006a293c --- /dev/null +++ b/SSD/ADATA/SU650/SU650NS38 256GB/B5E76710E6E0 @@ -0,0 +1,174 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650NS38 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: P210730f +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Nov 6 22:31:46 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9419 + 12 Power_Cycle_Count -O--C- 100 100 000 - 50 +167 Average_Erase_Count -O---K 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 0 +169 Remaining_Lifetime_Perc PO--C- 099 099 010 - 131076 +173 Unknown_Attribute -O--C- 200 200 000 - 55837851696 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 134 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 33 +194 Temperature_Celsius -O---K 066 066 030 - 34 (Min/Max 27/45) +231 SSD_Life_Left PO--CK 097 097 005 - 3 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 5435 +234 Unknown_Attribute -O--CK 100 100 000 - 1094648 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1665 +242 Host_Reads_32MiB -O--CK 100 100 000 - 35 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/37 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (132) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 9419 --- Power-on Hours +0x01 0x018 6 3492207230 --- Logical Sectors Written +0x01 0x020 6 248121130 --- Number of Write Commands +0x01 0x028 6 74476035 --- Logical Sectors Read +0x01 0x030 6 2023097 --- Number of Read Commands +0x01 0x038 6 8679670526748 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU650/SU650NS38 256GB/CA99F9459C05 b/SSD/ADATA/SU650/SU650NS38 256GB/CA99F9459C05 new file mode 100644 index 000000000..48b2a3d81 --- /dev/null +++ b/SSD/ADATA/SU650/SU650NS38 256GB/CA99F9459C05 @@ -0,0 +1,99 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650NS38 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: S210608c +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 20 17:08:43 2025 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3034 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 195 +167 Average_Erase_Count 0x0022 100 100 000 Old_age Always - 0 +168 Max_Erase_Count_of_Spec 0x0012 100 100 000 Old_age Always - 0 +169 Remaining_Lifetime_Perc 0x0013 099 099 010 Pre-fail Always - 262152 +173 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 47250473000 +175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 020 Pre-fail Always - 176 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 11 +194 Temperature_Celsius 0x0022 062 062 030 Old_age Always - 38 (Min/Max 25/45) +231 SSD_Life_Left 0x0033 098 098 005 Pre-fail Always - 2 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 2655 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 39992 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 2411 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 427 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/ADATA/SU650/SU650NS38 480GB/7B390B1D7004 b/SSD/ADATA/SU650/SU650NS38 480GB/7B390B1D7004 new file mode 100644 index 000000000..1efa24ed7 --- /dev/null +++ b/SSD/ADATA/SU650/SU650NS38 480GB/7B390B1D7004 @@ -0,0 +1,100 @@ +smartctl 7.4 2023-08-01 r5530 [DragonFly 6.4-RELEASE x86_64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650NS38 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: S210608c +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jun 1 11:14:58 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 406 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 239 +167 Average_Erase_Count 0x0022 100 100 000 Old_age Always - 0 +168 Max_Erase_Count_of_Spec 0x0012 100 100 000 Old_age Always - 0 +169 Remaining_Lifetime_Perc 0x0013 099 099 010 Pre-fail Always - 262152 +173 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 12885295109 +175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 020 Pre-fail Always - 676 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 52 +194 Temperature_Celsius 0x0022 068 068 030 Old_age Always - 32 (Min/Max 25/41) +231 SSD_Life_Left 0x0033 100 100 005 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 251 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 8193 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 317 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 60 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/ADATA/SU650/SU650NS38 512GB/CBEFD212D230 b/SSD/ADATA/SU650/SU650NS38 512GB/CBEFD212D230 new file mode 100644 index 000000000..67e71f3a8 --- /dev/null +++ b/SSD/ADATA/SU650/SU650NS38 512GB/CBEFD212D230 @@ -0,0 +1,174 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650NS38 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: P210730a +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 2 12:57:14 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 153 + 12 Power_Cycle_Count -O--C- 100 100 000 - 163 +167 Average_Erase_Count -O---K 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 0 +169 Remaining_Lifetime_Perc PO--C- 099 099 010 - 196614 +173 Unknown_Attribute -O--C- 200 200 000 - 17180327941 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 269 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius -O---K 064 064 030 - 36 (Min/Max 25/48) +231 SSD_Life_Left PO--CK 100 100 005 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 1171202048 +234 Unknown_Attribute -O--CK 100 100 000 - 332551498752 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1608660781 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1556263242 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: ?/38 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (364) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 163 --- Lifetime Power-On Resets +0x01 0x010 4 153 --- Power-on Hours +0x01 0x018 6 1608660781 --- Logical Sectors Written +0x01 0x020 6 13202514 --- Number of Write Commands +0x01 0x028 6 1556263242 --- Logical Sectors Read +0x01 0x030 6 12545854 --- Number of Read Commands +0x01 0x038 6 34494281068 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU655/SU655 120GB/EF3944ABEF44 b/SSD/ADATA/SU655/SU655 120GB/EF3944ABEF44 new file mode 100644 index 000000000..e3bf8a7bc --- /dev/null +++ b/SSD/ADATA/SU655/SU655 120GB/EF3944ABEF44 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU655 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: XD0R3C0A +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 3 22:27:14 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 20955 + 12 Power_Cycle_Count -O--CK 100 100 000 - 41 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 000 - 24 +164 Total_Erase_Count -O--CK 100 100 000 - 14549 +165 Max_Erase_Count -O--CK 100 100 000 - 51 +166 Min_Erase_Count -O--CK 100 100 000 - 8 +167 Average_Erase_Count -O--CK 100 100 000 - 27 +148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 43649 +149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 154 +150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 25 +151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 82 +159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 154 +169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 +177 Wear_Leveling_Count -O--CK 100 100 000 - 1 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 +194 Temperature_Celsius -O--CK 100 100 000 - 26 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Host_Writes_32MiB -O--CK 100 100 000 - 55789 +242 Host_Reads_32MiB -O--CK 100 100 000 - 12149 +245 TLC_Writes_32MiB -O--CK 100 100 000 - 113145 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 20955 --- Power-on Hours +0x01 0x018 6 3656197043 --- Logical Sectors Written +0x01 0x020 6 179732769 --- Number of Write Commands +0x01 0x028 6 796257258 --- Logical Sectors Read +0x01 0x030 6 6163428 --- Number of Read Commands +0x01 0x038 6 75440631563 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 155 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU750/SU750 256GB/8D4DB25AADAF b/SSD/ADATA/SU750/SU750 256GB/8D4DB25AADAF new file mode 100644 index 000000000..7dfd90f52 --- /dev/null +++ b/SSD/ADATA/SU750/SU750 256GB/8D4DB25AADAF @@ -0,0 +1,165 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SU750 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: XA001R21 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 24 07:10:51 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 8) minutes. +Extended self-test routine +recommended polling time: ( 25) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O-R-- 100 100 010 - 0 + 9 Power_On_Hours ------ 100 100 000 - 2288 + 12 Power_Cycle_Count ------ 100 100 000 - 782 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 98 +163 Unknown_Attribute ------ 100 100 000 - 35 +164 Unknown_Attribute ------ 100 100 000 - 16263 +165 Unknown_Attribute ------ 100 100 000 - 53 +166 Unknown_Attribute ------ 100 100 000 - 15 +167 Unknown_Attribute ------ 100 100 000 - 36 +148 Unknown_Attribute ------ 100 100 000 - 48790 +149 Unknown_Attribute ------ 100 100 000 - 160 +150 Unknown_Attribute ------ 100 100 000 - 47 +151 Unknown_Attribute ------ 100 100 000 - 108 +159 Unknown_Attribute ------ 100 100 000 - 0 +168 Unknown_Attribute ------ 100 100 000 - 160 +169 Unknown_Attribute ------ 100 100 000 - 97 +177 Wear_Leveling_Count ------ 100 100 000 - 1229 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 212 +194 Temperature_Celsius ------ 100 100 000 - 82 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 98 +241 Total_LBAs_Written ------ 100 100 000 - 152815 +242 Total_LBAs_Read ------ 100 100 000 - 151622 +245 Unknown_Attribute ------ 100 100 000 - 337567 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 782 --- Lifetime Power-On Resets +0x01 0x010 4 2288 --- Power-on Hours +0x01 0x018 6 10014922567 --- Logical Sectors Written +0x01 0x020 6 177445171 --- Number of Write Commands +0x01 0x028 6 9936743993 --- Logical Sectors Read +0x01 0x030 6 139768883 --- Number of Read Commands +0x01 0x038 6 8067460063 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1352 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ADATA/SU800/SU800 128GB/777CCABA46BE b/SSD/ADATA/SU800/SU800 128GB/777CCABA46BE new file mode 100644 index 000000000..32c8f394b --- /dev/null +++ b/SSD/ADATA/SU800/SU800 128GB/777CCABA46BE @@ -0,0 +1,203 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: Q0922FS +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 30 16:16:42 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 10 + 9 Power_On_Hours ------ 100 100 000 - 5494 + 12 Power_Cycle_Count ------ 100 100 000 - 107 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 36 +163 Initial_Bad_Block_Count ------ 100 100 000 - 7 +164 Total_Erase_Count ------ 100 100 000 - 123515 +165 Max_Erase_Count ------ 100 100 000 - 296 +166 Min_Erase_Count ------ 100 100 000 - 196 +167 Average_Erase_Count ------ 100 100 000 - 246 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 203967 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 6013 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 5876 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 5999 +159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 644 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 36 +194 Temperature_Celsius ------ 100 100 000 - 47 +195 Hardware_ECC_Recovered ------ 100 100 000 - 49851 +196 Reallocated_Event_Count ------ 100 100 016 - 2 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 94 +241 Host_Writes_32MiB ------ 100 100 000 - 424424 +242 Host_Reads_32MiB ------ 100 100 000 - 7171 +245 TLC_Writes_32MiB ------ 100 100 000 - 1111635 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 107 --- Lifetime Power-On Resets +0x01 0x010 4 5494 --- Power-on Hours +0x01 0x018 6 2045247827 --- Logical Sectors Written +0x01 0x020 6 461889787 --- Number of Write Commands +0x01 0x028 6 469974162 --- Logical Sectors Read +0x01 0x030 6 11117053 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 36 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 402 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 128GB/8CA2E06EB7B3 b/SSD/ADATA/SU800/SU800 128GB/8CA2E06EB7B3 new file mode 100644 index 000000000..71a1ebcfe --- /dev/null +++ b/SSD/ADATA/SU800/SU800 128GB/8CA2E06EB7B3 @@ -0,0 +1,221 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: Q0125A +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 12 05:01:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 15 + 9 Power_On_Hours ------ 100 100 000 - 44344 + 12 Power_Cycle_Count ------ 100 100 000 - 178 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 34 +163 Initial_Bad_Block_Count ------ 100 100 000 - 5 +164 Total_Erase_Count ------ 100 100 000 - 220632 +165 Max_Erase_Count ------ 100 100 000 - 491 +166 Min_Erase_Count ------ 100 100 000 - 392 +167 Average_Erase_Count ------ 100 100 000 - 442 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 485024 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 14312 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 14220 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 14265 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 837 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +187 Reported_Uncorrect ------ 100 100 000 - 17 +192 Power-Off_Retract_Count ------ 100 100 000 - 93 +194 Temperature_Celsius ------ 100 100 000 - 52 +196 Reallocated_Event_Count ------ 100 100 016 - 17 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 48 +225 Host_Writes_32MiB PO---- 100 100 000 - 692471 +232 Available_Reservd_Space ------ 100 100 000 - 91 +241 Host_Writes_32MiB ------ 100 100 000 - 692471 +242 Host_Reads_32MiB ------ 100 100 000 - 293755 +245 TLC_Writes_32MiB ------ 100 100 000 - 1765056 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 44319 - +# 2 Offline Completed without error 00% 31 - +# 3 Offline Completed without error 00% 44319 - +# 4 Offline Completed without error 00% 44205 - +# 5 Offline Completed without error 00% 44205 - +# 6 Offline Completed without error 00% 42714 - +# 7 Offline Completed without error 00% 42714 - +# 8 Offline Completed without error 00% 42713 - +# 9 Offline Completed without error 00% 42713 - +#10 Offline Completed without error 00% 42712 - +#11 Offline Completed without error 00% 42712 - +#12 Offline Completed without error 00% 42711 - +#13 Offline Completed without error 00% 42711 - +#14 Offline Completed without error 00% 42710 - +#15 Offline Completed without error 00% 42710 - +#16 Offline Completed without error 00% 42709 - +#17 Offline Completed without error 00% 42709 - +#18 Offline Completed without error 00% 42708 - +#19 Offline Completed without error 00% 42496 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 49/57 Celsius +Lifetime Min/Max Temperature: 0/72 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 178 --- Lifetime Power-On Resets +0x01 0x010 4 44344 --- Power-on Hours +0x01 0x018 6 2432133371 --- Logical Sectors Written +0x01 0x020 6 865634893 --- Number of Write Commands +0x01 0x028 6 2071682821 --- Logical Sectors Read +0x01 0x030 6 394036335 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 17 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2402236 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 18489 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 29 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SU800/SU800 128GB/BF60D357D56B b/SSD/ADATA/SU800/SU800 128GB/BF60D357D56B new file mode 100644 index 000000000..c6eaf22b7 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 128GB/BF60D357D56B @@ -0,0 +1,201 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: Q0125A +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Mar 20 08:19:02 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0xe000) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 1 + 9 Power_On_Hours ------ 100 100 000 - 33422 + 12 Power_Cycle_Count ------ 100 100 000 - 32 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 23 +163 Initial_Bad_Block_Count ------ 100 100 000 - 21 +164 Total_Erase_Count ------ 100 100 000 - 26007 +165 Max_Erase_Count ------ 100 100 000 - 81 +166 Min_Erase_Count ------ 100 100 000 - 15 +167 Average_Erase_Count ------ 100 100 000 - 53 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 61456 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 1843 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 1705 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 1807 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 22 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +187 Reported_Uncorrect ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 20 +194 Temperature_Celsius ------ 100 100 000 - 44 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +225 Host_Writes_32MiB PO---- 100 100 000 - 66321 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 66321 +242 Host_Reads_32MiB ------ 100 100 000 - 2983 +245 TLC_Writes_32MiB ------ 100 100 000 - 208056 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 33422 --- Power-on Hours +0x01 0x018 6 51492297 --- Logical Sectors Written +0x01 0x020 6 140842036 --- Number of Write Commands +0x01 0x028 6 195528761 --- Logical Sectors Read +0x01 0x030 6 1880740 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 20 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 112 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 28 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 128GB/FDC5B0F54830 b/SSD/ADATA/SU800/SU800 128GB/FDC5B0F54830 new file mode 100644 index 000000000..66e61ca87 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 128GB/FDC5B0F54830 @@ -0,0 +1,218 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: R0427ANR +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 8 19:00:21 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 12197 + 12 Power_Cycle_Count ------ 100 100 000 - 1678 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 33446 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 2260 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 2188 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 2229 +159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 42 +163 Initial_Bad_Block_Count ------ 100 100 000 - 15 +164 Total_Erase_Count ------ 100 100 000 - 162083 +165 Max_Erase_Count ------ 100 100 000 - 372 +166 Min_Erase_Count ------ 100 100 000 - 279 +167 Average_Erase_Count ------ 100 100 000 - 345 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 77 +177 Wear_Leveling_Count ------ 100 100 050 - 73 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 165 +194 Temperature_Celsius ------ 100 100 000 - 33 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 334303 +242 Host_Reads_32MiB ------ 100 100 000 - 232165 +245 TLC_Writes_32MiB ------ 100 100 000 - 1458747 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 13/35 Celsius +Lifetime Min/Max Temperature: 0/63 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (55) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1678 --- Lifetime Power-On Resets +0x01 0x010 4 12197 --- Power-on Hours +0x01 0x018 6 434096087 --- Logical Sectors Written +0x01 0x020 6 422616658 --- Number of Write Commands +0x01 0x028 6 2330277169 --- Logical Sectors Read +0x01 0x030 6 275710070 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 166 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 63 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 60 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 60 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9009 --- Number of Hardware Resets +0x06 0x010 4 555 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 23 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SU800/SU800 1TB/F59DCECBC8BE b/SSD/ADATA/SU800/SU800 1TB/F59DCECBC8BE new file mode 100644 index 000000000..8d6e0e89d --- /dev/null +++ b/SSD/ADATA/SU800/SU800 1TB/F59DCECBC8BE @@ -0,0 +1,201 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: R0918B +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 20 23:56:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0xe001) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 43750 + 12 Power_Cycle_Count ------ 100 100 000 - 224 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 38 +163 Initial_Bad_Block_Count ------ 100 100 000 - 16 +164 Total_Erase_Count ------ 100 100 000 - 6383 +165 Max_Erase_Count ------ 100 100 000 - 20 +166 Min_Erase_Count ------ 100 100 000 - 2 +167 Average_Erase_Count ------ 100 100 000 - 4 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 7 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 90 +194 Temperature_Celsius ------ 100 100 000 - 52 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 179842 +242 Host_Reads_32MiB ------ 100 100 000 - 141298 +245 TLC_Writes_32MiB ------ 100 100 000 - 102128 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 224 --- Lifetime Power-On Resets +0x01 0x010 4 43750 --- Power-on Hours +0x01 0x018 6 3196227279 --- Logical Sectors Written +0x01 0x020 6 287000140 --- Number of Write Commands +0x01 0x028 6 670190661 --- Logical Sectors Read +0x01 0x030 6 56304260 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 90 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 871 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SU800/SU800 256GB/03A7AF31C049 b/SSD/ADATA/SU800/SU800 256GB/03A7AF31C049 new file mode 100644 index 000000000..a228034d6 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 256GB/03A7AF31C049 @@ -0,0 +1,175 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: R0918B +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 17 10:57:24 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 14389 + 12 Power_Cycle_Count ------ 100 100 000 - 1980 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 39 +163 Initial_Bad_Block_Count ------ 100 100 000 - 15 +164 Total_Erase_Count ------ 100 100 000 - 72337 +165 Max_Erase_Count ------ 100 100 000 - 106 +166 Min_Erase_Count ------ 100 100 000 - 8 +167 Average_Erase_Count ------ 100 100 000 - 54 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 95 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 40 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 382 +194 Temperature_Celsius ------ 100 100 000 - 49 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 1268 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 453371 +242 Host_Reads_32MiB ------ 100 100 000 - 384332 +245 TLC_Writes_32MiB ------ 100 100 000 - 289348 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Read SMART Selective Self-test Log failed: Input/output error + +Read SCT Status failed: Input/output error + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1980 --- Lifetime Power-On Resets +0x01 0x010 4 14389 --- Power-on Hours +0x01 0x018 6 3942344763 --- Logical Sectors Written +0x01 0x020 6 453524546 --- Number of Write Commands +0x01 0x028 6 3712769625 --- Logical Sectors Read +0x01 0x030 6 415673419 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 385 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14534 --- Number of Hardware Resets +0x06 0x018 4 1268 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 256GB/96D33527664C b/SSD/ADATA/SU800/SU800 256GB/96D33527664C new file mode 100644 index 000000000..25fa6bfe0 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 256GB/96D33527664C @@ -0,0 +1,216 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: R0427AC +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 10 13:39:02 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 4969 + 12 Power_Cycle_Count ------ 100 100 000 - 1504 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 18928 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 1303 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 1172 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 1261 +159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 41 +163 Initial_Bad_Block_Count ------ 100 100 000 - 16 +164 Total_Erase_Count ------ 100 100 000 - 184770 +165 Max_Erase_Count ------ 100 100 000 - 438 +166 Min_Erase_Count ------ 100 100 000 - 339 +167 Average_Erase_Count ------ 100 100 000 - 395 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 74 +177 Wear_Leveling_Count ------ 100 100 050 - 277 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 35 +194 Temperature_Celsius ------ 100 100 000 - 38 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 1197812 +242 Host_Reads_32MiB ------ 100 100 000 - 669218 +245 TLC_Writes_32MiB ------ 100 100 000 - 3325860 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 20/42 Celsius +Lifetime Min/Max Temperature: 0/60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1504 --- Lifetime Power-On Resets +0x01 0x010 4 4969 --- Power-on Hours +0x01 0x018 6 1190445957 --- Logical Sectors Written +0x01 0x020 6 801710211 --- Number of Write Commands +0x01 0x028 6 908256877 --- Logical Sectors Read +0x01 0x030 6 628726290 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 35 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 60 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 60 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9289 --- Number of Hardware Resets +0x06 0x010 4 75 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 26 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 256GB/C8CFA35E46A2 b/SSD/ADATA/SU800/SU800 256GB/C8CFA35E46A2 new file mode 100644 index 000000000..16afc7431 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 256GB/C8CFA35E46A2 @@ -0,0 +1,204 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: Q0518BS +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 18:35:01 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0xe000) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 22253 + 12 Power_Cycle_Count ------ 100 100 000 - 256 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 57 +163 Initial_Bad_Block_Count ------ 100 100 000 - 9 +164 Total_Erase_Count ------ 100 100 000 - 155830 +165 Max_Erase_Count ------ 100 100 000 - 333 +166 Min_Erase_Count ------ 100 100 000 - 233 +167 Average_Erase_Count ------ 100 100 000 - 310 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 378504 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 11161 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 11058 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 11132 +159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 295 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 39 +194 Temperature_Celsius ------ 100 100 000 - 47 +195 Hardware_ECC_Recovered ------ 100 100 000 - 516512 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 3 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 1916505 +242 Host_Reads_32MiB ------ 100 100 000 - 977832 +245 TLC_Writes_32MiB ------ 100 100 000 - 2804940 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 45/47 Celsius +Lifetime Min/Max Temperature: 0/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (35) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 256 --- Lifetime Power-On Resets +0x01 0x010 4 22253 --- Power-on Hours +0x01 0x018 6 1046060369 --- Logical Sectors Written +0x01 0x020 6 2041303107 --- Number of Write Commands +0x01 0x028 6 3953661934 --- Logical Sectors Read +0x01 0x030 6 1051710991 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 40 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2191 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 512GB/14F6F7D65115 b/SSD/ADATA/SU800/SU800 512GB/14F6F7D65115 new file mode 100644 index 000000000..98680badc --- /dev/null +++ b/SSD/ADATA/SU800/SU800 512GB/14F6F7D65115 @@ -0,0 +1,198 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 02K0S86D +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 17 16:53:37 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 12134 + 12 Power_Cycle_Count ------ 100 100 000 - 6104 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 47 +163 Initial_Bad_Block_Count ------ 100 100 000 - 8 +164 Total_Erase_Count ------ 100 100 000 - 152029 +165 Max_Erase_Count ------ 100 100 000 - 140 +166 Min_Erase_Count ------ 100 100 000 - 61 +167 Average_Erase_Count ------ 100 100 000 - 113 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 89 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 213 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 268 +194 Temperature_Celsius ------ 100 100 000 - 15 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO---- 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 935013 +242 Host_Reads_32MiB ------ 100 100 000 - 328353 +245 TLC_Writes_32MiB ------ 100 100 000 - 1216232 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6104 --- Lifetime Power-On Resets +0x01 0x010 4 12134 --- Power-on Hours +0x01 0x018 6 1147516564 --- Logical Sectors Written +0x01 0x020 6 1004445102 --- Number of Write Commands +0x01 0x028 6 44140185 --- Logical Sectors Read +0x01 0x030 6 332999199 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 268 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 30129 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 36 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 512GB/D052E9E8CA6B b/SSD/ADATA/SU800/SU800 512GB/D052E9E8CA6B new file mode 100644 index 000000000..80bd96f46 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 512GB/D052E9E8CA6B @@ -0,0 +1,215 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: R0427ANR +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 13 15:18:08 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 19279 + 12 Power_Cycle_Count ------ 100 100 000 - 508 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 67697 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 4546 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 4487 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 4513 +159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 38 +163 Initial_Bad_Block_Count ------ 100 100 000 - 22 +164 Total_Erase_Count ------ 100 100 000 - 531437 +165 Max_Erase_Count ------ 100 100 000 - 1168 +166 Min_Erase_Count ------ 100 100 000 - 1087 +167 Average_Erase_Count ------ 100 100 000 - 1142 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 24 +177 Wear_Leveling_Count ------ 100 100 050 - 63 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 64 +194 Temperature_Celsius ------ 100 100 000 - 32 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 1 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 521019 +242 Host_Reads_32MiB ------ 100 100 000 - 567020 +245 TLC_Writes_32MiB ------ 100 100 000 - 19131732 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 25/50 Celsius +Lifetime Min/Max Temperature: 0/65 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (90) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 508 --- Lifetime Power-On Resets +0x01 0x010 4 19279 --- Power-on Hours +0x01 0x018 6 4080757207 --- Logical Sectors Written +0x01 0x020 6 925772608 --- Number of Write Commands +0x01 0x028 6 2800542392 --- Logical Sectors Read +0x01 0x030 6 611132570 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 64 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 65 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 58 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 58 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2861 --- Number of Hardware Resets +0x06 0x010 4 362 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 76 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 48 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 512GB/EE5781E67C0D b/SSD/ADATA/SU800/SU800 512GB/EE5781E67C0D new file mode 100644 index 000000000..9a593e545 --- /dev/null +++ b/SSD/ADATA/SU800/SU800 512GB/EE5781E67C0D @@ -0,0 +1,113 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 02K0S86D +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 6 11:10:31 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 + 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 + 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 430 + 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 405 +160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 +161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 49 +163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 6 +164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 1335 +165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 22 +166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 0 +167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 0 +168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 1000 +169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100 +175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0 +178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 +182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 +192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 28 +194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 23 +195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 +196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 +197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 +198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0003 100 100 050 Pre-fail Always - 60 +232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 +241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 33087 +242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 17898 +245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 10680 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/ADATA/SU800/SU800NS38 128GB/AE4845731DF0 b/SSD/ADATA/SU800/SU800NS38 128GB/AE4845731DF0 new file mode 100644 index 000000000..2c7dec5ca --- /dev/null +++ b/SSD/ADATA/SU800/SU800NS38 128GB/AE4845731DF0 @@ -0,0 +1,221 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SU800NS38 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: Q0518BS +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 15 00:29:36 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0xe000) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 18417 + 12 Power_Cycle_Count ------ 100 100 000 - 2508 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 38 +163 Unknown_Attribute ------ 100 100 000 - 7 +164 Unknown_Attribute ------ 100 100 000 - 118580 +165 Unknown_Attribute ------ 100 100 000 - 259 +166 Unknown_Attribute ------ 100 100 000 - 165 +167 Unknown_Attribute ------ 100 100 000 - 235 +148 Unknown_Attribute ------ 100 100 000 - 201921 +149 Unknown_Attribute ------ 100 100 000 - 5959 +150 Unknown_Attribute ------ 100 100 000 - 5842 +151 Unknown_Attribute ------ 100 100 000 - 5938 +159 Unknown_Attribute ------ 100 100 000 - 0 +168 Unknown_Attribute ------ 100 100 000 - 1500 +169 Unknown_Attribute ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 116 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 542 +194 Temperature_Celsius ------ 100 100 000 - 41 +195 Hardware_ECC_Recovered ------ 100 100 000 - 2127 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 418798 +242 Total_LBAs_Read ------ 100 100 000 - 378351 +245 Unknown_Attribute ------ 100 100 000 - 1067220 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 18409 - +# 2 Offline Completed without error 00% 18409 - +# 3 Offline Completed without error 00% 18409 - +# 4 Offline Completed without error 00% 18408 - +# 5 Offline Completed without error 00% 18408 - +# 6 Offline Completed without error 00% 18407 - +# 7 Offline Completed without error 00% 18176 - +# 8 Offline Completed without error 00% 230 - +# 9 Offline Completed without error 00% 18405 - +#10 Offline Completed without error 00% 18405 - +#11 Offline Completed without error 00% 18404 - +#12 Offline Completed without error 00% 18404 - +#13 Offline Completed without error 00% 18403 - +#14 Offline Completed without error 00% 18403 - +#15 Offline Completed without error 00% 18402 - +#16 Offline Completed without error 00% 18402 - +#17 Offline Completed without error 00% 18401 - +#18 Offline Completed without error 00% 18401 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 40/41 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (120) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2508 --- Lifetime Power-On Resets +0x01 0x010 4 18417 --- Power-on Hours +0x01 0x018 6 1676570963 --- Logical Sectors Written +0x01 0x020 6 211078690 --- Number of Write Commands +0x01 0x028 6 3320815618 --- Logical Sectors Read +0x01 0x030 6 134313039 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 543 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11982 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU810/SU810NS38 SATA 128 GB/BF4C986F7DD1 b/SSD/ADATA/SU810/SU810NS38 SATA 128 GB/BF4C986F7DD1 new file mode 100644 index 000000000..8bf8cc2b9 --- /dev/null +++ b/SSD/ADATA/SU810/SU810NS38 SATA 128 GB/BF4C986F7DD1 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SU810NS38 SATA 128 GB +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 92003241 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jan 4 09:56:31 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO---- 100 100 010 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 16225 + 12 Power_Cycle_Count PO---- 100 100 000 - 1009 +175 Program_Fail_Count_Chip PO---- 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO---- 100 100 010 - 0 +177 Wear_Leveling_Count PO---- 100 100 000 - 3028365 +179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO---- 000 000 000 - 47 +181 Program_Fail_Cnt_Total PO---- 100 100 010 - 0 +182 Erase_Fail_Count_Total PO---- 100 100 010 - 0 +187 Reported_Uncorrect PO---- 100 100 000 - 0 +194 Temperature_Celsius ------ 100 100 000 - 53 +195 Hardware_ECC_Recovered PO---- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO---- 100 100 000 - 4 +238 Unknown_Attribute PO---- 000 000 000 - 98304425 +241 Total_LBAs_Written PO---- 100 100 000 - 2836473 +242 Total_LBAs_Read PO---- 100 100 000 - 462836 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 937 - +# 2 Short offline Completed without error 00% 844 - +# 3 Short offline Completed without error 00% 745 - +# 4 Short offline Completed without error 00% 649 - +# 5 Short offline Completed without error 00% 642 - +# 6 Short offline Completed without error 00% 640 - +# 7 Short offline Completed without error 00% 244 - +# 8 Short offline Completed without error 00% 4 - +# 9 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 53 Celsius +Power Cycle Min/Max Temperature: 45/77 Celsius +Lifetime Min/Max Temperature: 0/83 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (10) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1009 --- Lifetime Power-On Resets +0x01 0x010 4 16225 --- Power-on Hours +0x01 0x018 6 1207541198 --- Logical Sectors Written +0x01 0x020 6 1134820642 --- Number of Write Commands +0x01 0x028 6 267654154 --- Logical Sectors Read +0x01 0x030 6 290873782 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1573510 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 53 --- Current Temperature +0x05 0x010 1 44 --- Average Short Term Temperature +0x05 0x018 1 42 --- Average Long Term Temperature +0x05 0x020 1 83 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 62 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 62 --- Highest Average Long Term Temperature +0x05 0x048 1 20 --- Lowest Average Long Term Temperature +0x05 0x050 4 103 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5362 --- Number of Hardware Resets +0x06 0x010 4 314 --- Number of ASR Events +0x06 0x018 4 4 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 169 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 27 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/XM13/XM13 32GB/C6E539D616B8 b/SSD/ADATA/XM13/XM13 32GB/C6E539D616B8 new file mode 100644 index 000000000..afc800b18 --- /dev/null +++ b/SSD/ADATA/XM13/XM13 32GB/C6E539D616B8 @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA XM13 32GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 5.0.2d +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jun 1 15:33:45 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 + 9 Power_On_Hours -O--CK 000 000 000 - 22859 (146 242 0) + 12 Power_Cycle_Count -O--CK 099 099 000 - 1722 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +174 Unknown_Attribute ----CK 000 000 000 - 572 +177 Wear_Leveling_Count ------ 000 000 000 - 4 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 045 083 000 - 45 (Min/Max 12/83) +195 Hardware_ECC_Recovered --SRC- 100 100 000 - 0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unknown_SSD_Attribute --SRC- 100 100 000 - 0 +204 Soft_ECC_Correction --SRC- 100 100 000 - 0 +230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +231 Unknown_SSD_Attribute PO--C- 100 100 010 - 0 +233 Media_Wearout_Indicator ------ 000 000 000 - 4144 +234 Unknown_Attribute -O--CK 000 000 000 - 3583 +241 Total_LBAs_Written -O--CK 000 000 000 - 3583 +242 Total_LBAs_Read -O--CK 000 000 000 - 3848 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Self-test routine in progress 10% 11263 - +# 2 Short offline Self-test routine in progress 40% 11263 - +# 3 Short offline Self-test routine in progress 40% 11263 - +# 4 Short offline Self-test routine in progress 60% 11263 - +# 5 Short offline Self-test routine in progress 80% 11263 - +# 6 Short offline Self-test routine in progress 80% 11263 - +# 7 Short offline Self-test routine in progress 10% 11263 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 12/83 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (241) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/AGI/AGI1/AGI1K0GIMAI238/95ED358FF681 b/SSD/AGI/AGI1/AGI1K0GIMAI238/95ED358FF681 new file mode 100644 index 000000000..8754d8b1c --- /dev/null +++ b/SSD/AGI/AGI1/AGI1K0GIMAI238/95ED358FF681 @@ -0,0 +1,97 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AGI1K0GIMAI238 +Serial Number: -- +Firmware Version: W0814A0 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 3 11:53:26 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 2 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 17 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 18 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 105 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3808 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 12 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 2238 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 631 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 144 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/AGI/AGI120/AGI120G06AI138/17A80BBACE89 b/SSD/AGI/AGI120/AGI120G06AI138/17A80BBACE89 new file mode 100644 index 000000000..5e18934cc --- /dev/null +++ b/SSD/AGI/AGI120/AGI120G06AI138/17A80BBACE89 @@ -0,0 +1,186 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AGI120G06AI138 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8502c80 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 25 22:58:17 2025 +10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 120 + 12 Power_Cycle_Count -O--CK 100 100 000 - 7 +161 Unknown_Attribute -O--CK 100 100 000 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 291 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 0 +166 Unknown_Attribute -O--CK 100 100 000 - 22 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 3 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 21482 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 1 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 161 +241 Total_LBAs_Written -O--CK 100 100 000 - 73 +242 Total_LBAs_Read -O--CK 100 100 000 - 5 +249 Unknown_Attribute -O--CK 100 100 000 - 9 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 95 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 120 --- Power-on Hours +0x01 0x018 6 154164637 --- Logical Sectors Written +0x01 0x020 6 2874866 --- Number of Write Commands +0x01 0x028 6 12535567 --- Logical Sectors Read +0x01 0x030 6 341697 --- Number of Read Commands +0x01 0x038 6 422589805 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/AGILE/SSD/SSD 256GB/F3818D55792F b/SSD/AGILE/SSD/SSD 256GB/F3818D55792F new file mode 100644 index 000000000..026df83da --- /dev/null +++ b/SSD/AGILE/SSD/SSD 256GB/F3818D55792F @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AGILE-256GB +Serial Number: -- +Firmware Version: T0910A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 12 10:09:32 2025 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 12736 + 12 Power_Cycle_Count -O--CK 100 100 050 - 227 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 73 +164 Unknown_Attribute -O--CK 100 100 050 - 257579 +165 Unknown_Attribute -O--CK 100 100 050 - 879 +166 Unknown_Attribute -O--CK 100 100 050 - 45 +167 Unknown_Attribute -O--CK 100 100 050 - 135 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 220 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 276725 +242 Total_LBAs_Read ----CK 100 100 050 - 20978 +245 Unknown_Attribute -O--CK 100 100 050 - 159503 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 227 --- Lifetime Power-On Resets +0x01 0x010 4 12736 --- Power-on Hours +0x01 0x018 6 955628515 --- Logical Sectors Written +0x01 0x020 6 241233 --- Number of Write Commands +0x01 0x028 6 1374858455 --- Logical Sectors Read +0x01 0x030 6 21713 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ALKETRON/FireWizard/FireWizard 128GB/33649487088F b/SSD/ALKETRON/FireWizard/FireWizard 128GB/33649487088F new file mode 100644 index 000000000..34963eecc --- /dev/null +++ b/SSD/ALKETRON/FireWizard/FireWizard 128GB/33649487088F @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ALKETRON FireWizard 128GB +Serial Number: -- +Firmware Version: W0704A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Jan 20 16:17:29 2025 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 20 + 12 Power_Cycle_Count -O--CK 100 100 050 - 59 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 20 +164 Unknown_Attribute -O--CK 100 100 050 - 102 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 48 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 178 +242 Total_LBAs_Read ----CK 100 100 050 - 348 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 31/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 59 --- Lifetime Power-On Resets +0x01 0x010 4 20 --- Power-on Hours +0x01 0x018 6 11702053 --- Logical Sectors Written +0x01 0x020 6 7382499 --- Number of Write Commands +0x01 0x028 6 22865234 --- Logical Sectors Read +0x01 0x030 6 7212071 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/AMD/R5/R5MS128G5/424F96A91D00 b/SSD/AMD/R5/R5MS128G5/424F96A91D00 new file mode 100644 index 000000000..9d4304a3c --- /dev/null +++ b/SSD/AMD/R5/R5MS128G5/424F96A91D00 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AMD R5MS128G5 +Serial Number: -- +Firmware Version: X0124A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Feb 16 02:15:15 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 26 + 12 Power_Cycle_Count -O--CK 100 100 050 - 6 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 71 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 207 +242 Total_LBAs_Read ----CK 100 100 050 - 17 +245 Unknown_Attribute -O--CK 100 100 050 - 16 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 23/42 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 13580454 --- Logical Sectors Written +0x01 0x020 6 607276 --- Number of Write Commands +0x01 0x028 6 1173494 --- Logical Sectors Read +0x01 0x030 6 65949 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/AMD/R5/R5SL128G/398A5CE69481 b/SSD/AMD/R5/R5SL128G/398A5CE69481 new file mode 100644 index 000000000..776fde00c --- /dev/null +++ b/SSD/AMD/R5/R5SL128G/398A5CE69481 @@ -0,0 +1,164 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AMD R5SL128G +Serial Number: -- +Firmware Version: W0905A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 22 16:20:04 2025 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10997 + 12 Power_Cycle_Count -O--CK 100 100 050 - 26 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 41431 +165 Unknown_Attribute -O--CK 100 100 050 - 118 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 83 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 20 +194 Temperature_Celsius -O---K 100 100 050 - 37 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 324568 +242 Total_LBAs_Read ----CK 100 100 050 - 22893 +245 Unknown_Attribute -O--CK 100 100 050 - 160197 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 80% 3793 - +# 2 Short offline Interrupted (host reset) 80% 3793 - +# 3 Short offline Aborted by host 80% 3793 - +# 4 Short offline Aborted by host 80% 3793 - +# 5 Short offline Completed without error 00% 55 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 37/37 Celsius +Lifetime Min/Max Temperature: 24/47 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 10997 --- Power-on Hours +0x01 0x018 6 4091084456 --- Logical Sectors Written +0x01 0x020 6 203184449 --- Number of Write Commands +0x01 0x028 6 1500356750 --- Logical Sectors Read +0x01 0x030 6 64913475 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/AMD/R5/R5SL512G/0FF91F1416DC b/SSD/AMD/R5/R5SL512G/0FF91F1416DC new file mode 100644 index 000000000..6094e1c9b --- /dev/null +++ b/SSD/AMD/R5/R5SL512G/0FF91F1416DC @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AMD R5SL512G +Serial Number: -- +Firmware Version: W0203A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 17 21:23:00 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5037 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1851 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 5 +164 Unknown_Attribute -O--CK 100 100 050 - 25321 +165 Unknown_Attribute -O--CK 100 100 050 - 164 +166 Unknown_Attribute -O--CK 100 100 050 - 8 +167 Unknown_Attribute -O--CK 100 100 050 - 113 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 141 +194 Temperature_Celsius -O---K 100 100 050 - 32 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 406716 +242 Total_LBAs_Read ----CK 100 100 050 - 416449 +245 Unknown_Attribute -O--CK 100 100 050 - 393608 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 21/48 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1851 --- Lifetime Power-On Resets +0x01 0x010 4 5037 --- Power-on Hours +0x01 0x018 6 884774482 --- Logical Sectors Written +0x01 0x020 6 254420728 --- Number of Write Commands +0x01 0x028 6 1522609450 --- Logical Sectors Read +0x01 0x030 6 353210837 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ANACOMDA/TS/TS 120GB SSD/B50F4F9AC1B2 b/SSD/ANACOMDA/TS/TS 120GB SSD/B50F4F9AC1B2 new file mode 100644 index 000000000..747b1b4f4 --- /dev/null +++ b/SSD/ANACOMDA/TS/TS 120GB SSD/B50F4F9AC1B2 @@ -0,0 +1,184 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ANACOMDA TS 120GB SSD +Serial Number: -- +Firmware Version: R0327B0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Apr 18 22:05:03 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 3 + 9 Power_On_Hours -O--CK 100 100 050 - 2863 + 12 Power_Cycle_Count -O--CK 100 100 050 - 865 +160 Unknown_Attribute -O--CK 100 100 050 - 25 +161 Unknown_Attribute PO--CK 100 100 050 - 94 +163 Unknown_Attribute -O--CK 100 100 050 - 16 +164 Unknown_Attribute -O--CK 100 100 050 - 105236 +165 Unknown_Attribute -O--CK 100 100 050 - 184 +166 Unknown_Attribute -O--CK 100 100 050 - 40 +167 Unknown_Attribute -O--CK 100 100 050 - 145 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 3 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 374 +194 Temperature_Celsius -O---K 100 100 050 - 42 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 204209 +196 Reallocated_Event_Count -O--CK 100 100 050 - 25 +197 Current_Pending_Sector -O--CK 100 100 050 - 3 +198 Offline_Uncorrectable -O--CK 100 100 050 - 25 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 1 +232 Available_Reservd_Space -O--CK 100 100 050 - 94 +241 Total_LBAs_Written ----CK 100 100 050 - 124923 +242 Total_LBAs_Read ----CK 100 100 050 - 96520 +245 Unknown_Attribute -O--CK 100 100 050 - 181567 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 6 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 6 [1] log entry is empty +Error 5 [0] log entry is empty +Error 4 [3] log entry is empty +Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + 2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT + 2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT + b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG + b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 90% 2362 - +# 2 Short offline Aborted by host 90% 974 - +# 3 Short offline Aborted by host 90% 974 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 865 --- Lifetime Power-On Resets +0x01 0x010 4 2863 --- Power-on Hours +0x01 0x018 6 3892013039 --- Logical Sectors Written +0x01 0x020 6 8841 --- Number of Write Commands +0x01 0x028 6 2030623287 --- Logical Sectors Read +0x01 0x030 6 10021 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/130CB4B6AE87 b/SSD/ASint/AS606/AS606 256GB/130CB4B6AE87 new file mode 100644 index 000000000..27c4f40fb --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/130CB4B6AE87 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Dec 7 22:02:24 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 69 + 12 Power_Cycle_Count -O--CK 100 100 050 - 45 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 508 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 23 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 3439 +242 Total_LBAs_Read ----CK 100 100 050 - 3818 +245 Unknown_Attribute -O--CK 100 100 050 - 496 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 24/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x010 4 69 --- Power-on Hours +0x01 0x018 6 225379553 --- Logical Sectors Written +0x01 0x020 6 1523837 --- Number of Write Commands +0x01 0x028 6 250234030 --- Logical Sectors Read +0x01 0x030 6 4253245 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/29888F364434 b/SSD/ASint/AS606/AS606 256GB/29888F364434 new file mode 100644 index 000000000..1d0bb5b52 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/29888F364434 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 28 13:04:43 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 119 + 12 Power_Cycle_Count -O--CK 100 100 050 - 26 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 240 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 14 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1917 +242 Total_LBAs_Read ----CK 100 100 050 - 3374 +245 Unknown_Attribute -O--CK 100 100 050 - 208 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 36/58 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 119 --- Power-on Hours +0x01 0x018 6 125698005 --- Logical Sectors Written +0x01 0x020 6 895931 --- Number of Write Commands +0x01 0x028 6 221156896 --- Logical Sectors Read +0x01 0x030 6 3547501 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/3D2C68D3AC39 b/SSD/ASint/AS606/AS606 256GB/3D2C68D3AC39 new file mode 100644 index 000000000..5dc4ea5ab --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/3D2C68D3AC39 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 21 21:29:24 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 244 + 12 Power_Cycle_Count -O--CK 100 100 050 - 14 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 584 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 4 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4514 +242 Total_LBAs_Read ----CK 100 100 050 - 3624 +245 Unknown_Attribute -O--CK 100 100 050 - 112 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 27/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 244 --- Power-on Hours +0x01 0x018 6 295885144 --- Logical Sectors Written +0x01 0x020 6 3047671 --- Number of Write Commands +0x01 0x028 6 237504129 --- Logical Sectors Read +0x01 0x030 6 4007012 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/3F21BC620523 b/SSD/ASint/AS606/AS606 256GB/3F21BC620523 new file mode 100644 index 000000000..a64d9695b --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/3F21BC620523 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 7 21:50:45 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3 + 12 Power_Cycle_Count -O--CK 100 100 050 - 10 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 231 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1866 +242 Total_LBAs_Read ----CK 100 100 050 - 3366 +245 Unknown_Attribute -O--CK 100 100 050 - 16 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 17/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 122318395 --- Logical Sectors Written +0x01 0x020 6 560052 --- Number of Write Commands +0x01 0x028 6 220612001 --- Logical Sectors Read +0x01 0x030 6 3654149 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/44E3DCEA5C5D b/SSD/ASint/AS606/AS606 256GB/44E3DCEA5C5D new file mode 100644 index 000000000..ee76d4fb2 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/44E3DCEA5C5D @@ -0,0 +1,239 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP2818E3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 17 20:16:20 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1006 + 12 Power_Cycle_Count -O--CK 100 100 050 - 28 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 50 +165 Unknown_Attribute -O--CK 100 100 050 - 190 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 66 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 300270 +177 Wear_Leveling_Count -O--CK 100 100 050 - 17142265 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 9 +194 Temperature_Celsius -O--CK 100 100 050 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 150353 +242 Total_LBAs_Read -O--CK 100 100 050 - 28976 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 37 hours (1 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 00 00 01 00 00 00 00 00 01 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 50 00 01 00 01 00 00 00 00 00 01 00 ff 00:01:31.710 FORMAT TRACK [OBS-4] + +Error 2 [1] occurred at disk power-on lifetime: 37 hours (1 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 80 00 00 84 00 59 f0 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 50 00 00 00 80 00 00 84 00 59 f0 40 ff 00:01:07.400 FORMAT TRACK [OBS-4] + +Error 1 [0] occurred at disk power-on lifetime: 37 hours (1 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 80 00 00 08 00 00 00 51 00 128 sectors at LBA = 0x09000000 = 150994944 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 03 00 80 00 00 08 00 00 00 40 00 00:00:24.690 WRITE DMA EXT + 35 00 03 00 80 00 00 07 00 00 80 40 00 00:00:24.690 WRITE DMA EXT + 35 00 03 00 80 00 00 07 00 00 00 40 00 00:00:24.690 WRITE DMA EXT + 35 00 03 00 80 00 00 06 00 00 80 40 00 00:00:24.690 WRITE DMA EXT + 35 00 03 00 80 00 00 06 00 00 00 40 00 00:00:24.580 WRITE DMA EXT + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 9853534208 --- Logical Sectors Written +0x01 0x020 6 75381553 --- Number of Write Commands +0x01 0x028 6 1898971136 --- Logical Sectors Read +0x01 0x030 6 16395869 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 161 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 512 Device-to-host register FISes sent due to a COMRESET +0x000b 4 3 CRC errors within host-to-device FIS +0x000d 4 1 Non-CRC errors within host-to-device FIS + diff --git a/SSD/ASint/AS606/AS606 256GB/6061E6CEED48 b/SSD/ASint/AS606/AS606 256GB/6061E6CEED48 new file mode 100644 index 000000000..d783066d8 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/6061E6CEED48 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW201105 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 5 02:36:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 28 + 12 Power_Cycle_Count -O--CK 100 100 050 - 12 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 0 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 3751 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 2675 +242 Total_LBAs_Read -O--CK 100 100 050 - 3315 +249 Unknown_Attribute -O--CK 100 100 050 - 2810 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 28 --- Power-on Hours +0x01 0x018 6 175308800 --- Logical Sectors Written +0x01 0x020 6 1647576 --- Number of Write Commands +0x01 0x028 6 217251840 --- Logical Sectors Read +0x01 0x030 6 3657816 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 53 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 169 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/ASint/AS606/AS606 256GB/6EE5884E65DE b/SSD/ASint/AS606/AS606 256GB/6EE5884E65DE new file mode 100644 index 000000000..48de60b06 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/6EE5884E65DE @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 17 21:08:25 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 698 + 12 Power_Cycle_Count -O--CK 100 100 050 - 19 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 2127 +165 Unknown_Attribute -O--CK 100 100 050 - 6 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 4 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 8 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 14749 +242 Total_LBAs_Read ----CK 100 100 050 - 4391 +245 Unknown_Attribute -O--CK 100 100 050 - 3952 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 36/58 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 698 --- Power-on Hours +0x01 0x018 6 966608402 --- Logical Sectors Written +0x01 0x020 6 12897631 --- Number of Write Commands +0x01 0x028 6 287831023 --- Logical Sectors Read +0x01 0x030 6 5257359 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 34 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/6F88AC44FEC8 b/SSD/ASint/AS606/AS606 256GB/6F88AC44FEC8 new file mode 100644 index 000000000..e3e7ad763 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/6F88AC44FEC8 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0223A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 31 22:38:26 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1324 + 12 Power_Cycle_Count -O--CK 100 100 050 - 17 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 154 +164 Unknown_Attribute -O--CK 100 100 050 - 4273 +165 Unknown_Attribute -O--CK 100 100 050 - 4 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 8 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 6349 +242 Total_LBAs_Read ----CK 100 100 050 - 4085 +245 Unknown_Attribute -O--CK 100 100 050 - 4503 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 35/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 1324 --- Power-on Hours +0x01 0x018 6 416135273 --- Logical Sectors Written +0x01 0x020 6 6607554 --- Number of Write Commands +0x01 0x028 6 267735227 --- Logical Sectors Read +0x01 0x030 6 4428521 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 26 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/876F5378759A b/SSD/ASint/AS606/AS606 256GB/876F5378759A new file mode 100644 index 000000000..96d954d3b --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/876F5378759A @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP2818E3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 12 13:09:01 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1006 + 12 Power_Cycle_Count -O--CK 100 100 050 - 43 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 6 +165 Unknown_Attribute -O--CK 100 100 050 - 24 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 11 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 6528 +177 Wear_Leveling_Count -O--CK 100 100 050 - 17015945 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 23 +194 Temperature_Celsius -O--CK 100 100 050 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 29389 +242 Total_LBAs_Read -O--CK 100 100 050 - 9967 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 1006 --- Power-on Hours +0x01 0x018 6 1926037504 --- Logical Sectors Written +0x01 0x020 6 28169839 --- Number of Write Commands +0x01 0x028 6 653197312 --- Logical Sectors Read +0x01 0x030 6 11438814 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 165 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 520 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/ASint/AS606/AS606 256GB/8F40DB0B655D b/SSD/ASint/AS606/AS606 256GB/8F40DB0B655D new file mode 100644 index 000000000..c5de0251a --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/8F40DB0B655D @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW201105 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 4 20:01:33 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 14 + 12 Power_Cycle_Count -O--CK 100 100 050 - 15 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 0 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 8717 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 3121 +242 Total_LBAs_Read -O--CK 100 100 050 - 4267 +249 Unknown_Attribute -O--CK 100 100 050 - 3282 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 204537856 --- Logical Sectors Written +0x01 0x020 6 2670575 --- Number of Write Commands +0x01 0x028 6 279642112 --- Logical Sectors Read +0x01 0x030 6 4584538 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 58 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 187 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/ASint/AS606/AS606 256GB/9BA5E70D7FF7 b/SSD/ASint/AS606/AS606 256GB/9BA5E70D7FF7 new file mode 100644 index 000000000..8d3778b0d --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/9BA5E70D7FF7 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 6 21:17:42 2025 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3010 + 12 Power_Cycle_Count -O--CK 100 100 050 - 64 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 23284 +165 Unknown_Attribute -O--CK 100 100 050 - 71 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 45 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 47 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 76613 +242 Total_LBAs_Read ----CK 100 100 050 - 4768 +245 Unknown_Attribute -O--CK 100 100 050 - 346496 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 31/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x010 4 3010 --- Power-on Hours +0x01 0x018 6 725978262 --- Logical Sectors Written +0x01 0x020 6 49320986 --- Number of Write Commands +0x01 0x028 6 312516624 --- Logical Sectors Read +0x01 0x030 6 6015204 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/B621E6BF5E66 b/SSD/ASint/AS606/AS606 256GB/B621E6BF5E66 new file mode 100644 index 000000000..9f3c0dd09 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/B621E6BF5E66 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 27 12:54:39 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 873 + 12 Power_Cycle_Count -O--CK 100 100 050 - 152 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 17 +164 Unknown_Attribute -O--CK 100 100 050 - 1206 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 111 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 9483 +242 Total_LBAs_Read ----CK 100 100 050 - 4680 +245 Unknown_Attribute -O--CK 100 100 050 - 144 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 23/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 152 --- Lifetime Power-On Resets +0x01 0x010 4 873 --- Power-on Hours +0x01 0x018 6 621518691 --- Logical Sectors Written +0x01 0x020 6 2404672 --- Number of Write Commands +0x01 0x028 6 306747013 --- Logical Sectors Read +0x01 0x030 6 4638386 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/C8B95208FFF1 b/SSD/ASint/AS606/AS606 256GB/C8B95208FFF1 new file mode 100644 index 000000000..2d6ec1bfe --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/C8B95208FFF1 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 23 13:53:37 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 8 + 12 Power_Cycle_Count -O--CK 100 100 050 - 14 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 14 +164 Unknown_Attribute -O--CK 100 100 050 - 369 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 7 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 3082 +242 Total_LBAs_Read ----CK 100 100 050 - 3180 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 30/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 8 --- Power-on Hours +0x01 0x018 6 202045263 --- Logical Sectors Written +0x01 0x020 6 409507 --- Number of Write Commands +0x01 0x028 6 208425082 --- Logical Sectors Read +0x01 0x030 6 3478828 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 256GB/CF056C9E6B33 b/SSD/ASint/AS606/AS606 256GB/CF056C9E6B33 new file mode 100644 index 000000000..c06cf21f0 --- /dev/null +++ b/SSD/ASint/AS606/AS606 256GB/CF056C9E6B33 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 256GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 18 00:30:42 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 376 + 12 Power_Cycle_Count -O--CK 100 100 050 - 50 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 17 +164 Unknown_Attribute -O--CK 100 100 050 - 1135 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7353 +242 Total_LBAs_Read ----CK 100 100 050 - 648 +245 Unknown_Attribute -O--CK 100 100 050 - 2832 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 19/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 376 --- Power-on Hours +0x01 0x018 6 481921733 --- Logical Sectors Written +0x01 0x020 6 6090728 --- Number of Write Commands +0x01 0x028 6 42521495 --- Logical Sectors Read +0x01 0x030 6 677886 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/18A8610F402D b/SSD/ASint/AS606/AS606 512GB/18A8610F402D new file mode 100644 index 000000000..3921ca57e --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/18A8610F402D @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: W0220A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 20 16:45:38 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 29 + 12 Power_Cycle_Count -O--CK 100 100 050 - 11 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 93 +164 Unknown_Attribute -O--CK 100 100 050 - 4150 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 2047 +242 Total_LBAs_Read ----CK 100 100 050 - 3519 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 45/61 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 29 --- Power-on Hours +0x01 0x018 6 134184010 --- Logical Sectors Written +0x01 0x020 6 783161 --- Number of Write Commands +0x01 0x028 6 230631390 --- Logical Sectors Read +0x01 0x030 6 3825367 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 38 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/ADE1FBE57748 b/SSD/ASint/AS606/AS606 512GB/ADE1FBE57748 new file mode 100644 index 000000000..4ac00e6eb --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/ADE1FBE57748 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 12 23:15:17 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1199 + 12 Power_Cycle_Count -O--CK 100 100 050 - 21 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 14 +164 Unknown_Attribute -O--CK 100 100 050 - 1163 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 14 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 13714 +242 Total_LBAs_Read ----CK 100 100 050 - 3669 +245 Unknown_Attribute -O--CK 100 100 050 - 7968 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 23/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 1199 --- Power-on Hours +0x01 0x018 6 898790264 --- Logical Sectors Written +0x01 0x020 6 10123240 --- Number of Write Commands +0x01 0x028 6 240454143 --- Logical Sectors Read +0x01 0x030 6 4179297 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/CEB17770739D b/SSD/ASint/AS606/AS606 512GB/CEB17770739D new file mode 100644 index 000000000..9320a790f --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/CEB17770739D @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: X0223A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 1 05:44:09 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 109 + 12 Power_Cycle_Count -O--CK 100 100 050 - 14 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 100 +164 Unknown_Attribute -O--CK 100 100 050 - 597 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 2200 +242 Total_LBAs_Read ----CK 100 100 050 - 3437 +245 Unknown_Attribute -O--CK 100 100 050 - 76 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 31/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 109 --- Power-on Hours +0x01 0x018 6 144215125 --- Logical Sectors Written +0x01 0x020 6 1237486 --- Number of Write Commands +0x01 0x028 6 225311577 --- Logical Sectors Read +0x01 0x030 6 3861099 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/D18A513EF5A9 b/SSD/ASint/AS606/AS606 512GB/D18A513EF5A9 new file mode 100644 index 000000000..2bdafd0e3 --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/D18A513EF5A9 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 21 02:00:59 2025 AWST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5 + 12 Power_Cycle_Count -O--CK 100 100 050 - 16 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 250 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 9 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4422 +242 Total_LBAs_Read ----CK 100 100 050 - 3189 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 30/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 289853304 --- Logical Sectors Written +0x01 0x020 6 405354 --- Number of Write Commands +0x01 0x028 6 208999051 --- Logical Sectors Read +0x01 0x030 6 3490542 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/D5BD6371D4E2 b/SSD/ASint/AS606/AS606 512GB/D5BD6371D4E2 new file mode 100644 index 000000000..2998acf8e --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/D5BD6371D4E2 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: W0220A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 2 18:23:56 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4 + 12 Power_Cycle_Count -O--CK 100 100 050 - 22 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 45 +164 Unknown_Attribute -O--CK 100 100 050 - 3574 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 16 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1832 +242 Total_LBAs_Read ----CK 100 100 050 - 3535 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 45/61 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 120099651 --- Logical Sectors Written +0x01 0x020 6 425388 --- Number of Write Commands +0x01 0x028 6 231688680 --- Logical Sectors Read +0x01 0x030 6 3648534 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/ECA8E8C3A5AD b/SSD/ASint/AS606/AS606 512GB/ECA8E8C3A5AD new file mode 100644 index 000000000..def9b41fe --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/ECA8E8C3A5AD @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: W0220A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 10 21:23:39 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 304 + 12 Power_Cycle_Count -O--CK 100 100 050 - 22 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 59 +164 Unknown_Attribute -O--CK 100 100 050 - 5192 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 13 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4916 +242 Total_LBAs_Read ----CK 100 100 050 - 3571 +245 Unknown_Attribute -O--CK 100 100 050 - 12 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 25/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 304 --- Power-on Hours +0x01 0x018 6 322216767 --- Logical Sectors Written +0x01 0x020 6 2793070 --- Number of Write Commands +0x01 0x028 6 234031736 --- Logical Sectors Read +0x01 0x030 6 3945515 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ASint/AS606/AS606 512GB/F79F955CBEB7 b/SSD/ASint/AS606/AS606 512GB/F79F955CBEB7 new file mode 100644 index 000000000..40a132f80 --- /dev/null +++ b/SSD/ASint/AS606/AS606 512GB/F79F955CBEB7 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ASint AS606 512GB +Serial Number: -- +Firmware Version: W0220A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 7 01:16:03 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 32 + 12 Power_Cycle_Count -O--CK 100 100 050 - 49 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 117 +164 Unknown_Attribute -O--CK 100 100 050 - 5605 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 32 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 5887 +242 Total_LBAs_Read ----CK 100 100 050 - 6234 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 45/59 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 32 --- Power-on Hours +0x01 0x018 6 385813956 --- Logical Sectors Written +0x01 0x020 6 2629259 --- Number of Write Commands +0x01 0x028 6 408596943 --- Logical Sectors Read +0x01 0x030 6 5645240 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/ATP/SATA III M.2/SATA III M.2 2280 SSD/96E12CE326E8 b/SSD/ATP/SATA III M.2/SATA III M.2 2280 SSD/96E12CE326E8 new file mode 100644 index 000000000..dcadf811d --- /dev/null +++ b/SSD/ATP/SATA III M.2/SATA III M.2 2280 SSD/96E12CE326E8 @@ -0,0 +1,219 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ATP SATA III M.2 2280 SSD +Serial Number: -- +LU WWN Device Id: 5 141357 ... +Firmware Version: T0205B +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 11:41:08 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8150 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 + 14 Unknown_Attribute -O--CK 100 100 000 - 678297600 + 15 Unknown_Attribute -O--CK 100 100 000 - 468862128 + 16 Unknown_Attribute -O--CK 100 100 000 - 150 + 17 Unknown_Attribute PO--CK 000 000 000 - 52 +100 Unknown_Attribute -O--CK 100 100 000 - 317350 +160 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 100 100 000 - 683 +174 Unknown_Attribute -O--CK 100 100 000 - 10 +175 Program_Fail_Count_Chip -O--CK 078 078 000 - 662 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 043 062 000 - 43 (Min/Max 18/62) +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Unknown_SSD_Attribute ----CK 078 078 000 - 22 +205 Thermal_Asperity_Rate -O--CK 100 100 000 - 0 +231 Unknown_SSD_Attribute -O---K 060 096 000 - 1612382268 +234 Unknown_Attribute -O--CK 100 100 000 - 29629468230 +235 Unknown_Attribute -O--CK 100 100 000 - 104209755829 +241 Total_LBAs_Written -O--CK 100 100 000 - 176492305705 +242 Total_LBAs_Read -O--CK 100 100 000 - 517687659 +248 Unknown_Attribute ----CK 078 078 001 - 78 +249 Unknown_Attribute PO--CK 000 000 000 - 52 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 7950 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 18/62 Celsius +Lifetime Min/Max Temperature: 0/62 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 8150 --- Power-on Hours +0x01 0x018 6 1130540725 --- Logical Sectors Written +0x01 0x020 6 1537259450 --- Number of Write Commands +0x01 0x028 6 517687659 --- Logical Sectors Read +0x01 0x030 6 16216336 --- Number of Read Commands +0x01 0x038 6 3570362346 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 47 --- Average Short Term Temperature +0x05 0x018 1 47 --- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 46 --- Lowest Average Short Term Temperature +0x05 0x040 1 48 --- Highest Average Long Term Temperature +0x05 0x048 1 46 --- Lowest Average Long Term Temperature +0x05 0x050 4 48 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 47 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 328 --- Number of Hardware Resets +0x06 0x010 4 52 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 22 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ATP/SATA III M.2/SATA III M.2 2280/3E41CD83E402 b/SSD/ATP/SATA III M.2/SATA III M.2 2280/3E41CD83E402 new file mode 100644 index 000000000..367b124be --- /dev/null +++ b/SSD/ATP/SATA III M.2/SATA III M.2 2280/3E41CD83E402 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: ATP SATA III Value Line SSDs +Device Model: ATP SATA III M.2 2280 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 1 15:04:45 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Count PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 461 + 12 Power_Cycle_Count -O--C- 100 100 000 - 38 +168 SATA_PHY_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Bl_Ct_LATER_0_EARLY PO---- 100 100 010 - 0 0 26 +173 Erase_Count_0_AVG_MAX -O--C- 100 100 000 - 0 0 1 +192 Unexpected_Power_Loss -O--C- 100 100 000 - 32 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Errors PO-R-- 100 100 050 - 0 +231 Percent_Lifetime_Remain PO--C- 100 100 000 - 100 +241 Host_Writes_GiB -O--C- 100 100 000 - 40 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x010 4 461 --- Power-on Hours +0x01 0x018 6 83963062 --- Logical Sectors Written +0x01 0x028 6 18356648 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 12 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ATP/SATA III M.2/SATA III M.2 2280/86994BD8CFC8 b/SSD/ATP/SATA III M.2/SATA III M.2 2280/86994BD8CFC8 new file mode 100644 index 000000000..f12088456 --- /dev/null +++ b/SSD/ATP/SATA III M.2/SATA III M.2 2280/86994BD8CFC8 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ATP SATA III M.2 2280 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 15:44:02 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 8433 + 12 Power_Cycle_Count -O--C- 100 100 000 - 16 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 27 +173 Unknown_Attribute -O--C- 100 100 000 - 4063297 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 93 +241 Total_LBAs_Written -O--C- 100 100 000 - 2743 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 8433 --- Power-on Hours +0x01 0x018 6 5754172541 --- Logical Sectors Written +0x01 0x028 6 50098698 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 38 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 39 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ATP/SATA III M.2/SATA III M.2 2280/A0BB6A155D65 b/SSD/ATP/SATA III M.2/SATA III M.2 2280/A0BB6A155D65 new file mode 100644 index 000000000..ac2162c29 --- /dev/null +++ b/SSD/ATP/SATA III M.2/SATA III M.2 2280/A0BB6A155D65 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: ATP SATA III Value Line SSDs +Device Model: ATP SATA III M.2 2280 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 31 16:29:27 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Count PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 271 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +168 SATA_PHY_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Bl_Ct_LATER_0_EARLY PO---- 100 100 010 - 0 0 48 +173 Erase_Count_0_AVG_MAX -O--C- 100 100 000 - 0 0 1 +192 Unexpected_Power_Loss -O--C- 100 100 000 - 15 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Errors PO-R-- 100 100 050 - 0 +231 Percent_Lifetime_Remain PO--C- 100 100 000 - 100 +241 Host_Writes_GiB -O--C- 100 100 000 - 3 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 271 --- Power-on Hours +0x01 0x018 6 7734771 --- Logical Sectors Written +0x01 0x028 6 1798842 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ATP/SATA/SATA III mSATA SSD/B7A8CE588873 b/SSD/ATP/SATA/SATA III mSATA SSD/B7A8CE588873 new file mode 100644 index 000000000..40e901253 --- /dev/null +++ b/SSD/ATP/SATA/SATA III mSATA SSD/B7A8CE588873 @@ -0,0 +1,219 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ATP SATA III mSATA SSD +Serial Number: -- +LU WWN Device Id: 5 141357 ... +Firmware Version: S1018B +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 18:50:58 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1518 + 12 Power_Cycle_Count -O--CK 100 100 000 - 35 + 14 Unknown_Attribute -O--CK 100 100 000 - 721944576 + 15 Unknown_Attribute -O--CK 100 100 000 - 468862128 + 16 Unknown_Attribute -O--CK 100 100 000 - 187 + 17 Unknown_Attribute PO--CK 000 000 000 - 51 +100 Unknown_Attribute -O--CK 100 100 000 - 84831 +160 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 100 100 000 - 187 +174 Unknown_Attribute -O--CK 100 100 000 - 11 +175 Program_Fail_Count_Chip -O--CK 095 095 000 - 177 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 054 069 000 - 54 (Min/Max 39/59) +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Unknown_SSD_Attribute ----CK 095 095 000 - 5 +205 Thermal_Asperity_Rate -O--CK 100 100 000 - 0 +231 Unknown_SSD_Attribute -O---K 069 090 000 - 1345388613 +234 Unknown_Attribute -O--CK 100 100 000 - 1866737408 +235 Unknown_Attribute -O--CK 100 100 000 - 30358559341 +241 Total_LBAs_Written -O--CK 100 100 000 - 37507557704 +242 Total_LBAs_Read -O--CK 100 100 000 - 167464710 +248 Unknown_Attribute ----CK 095 095 001 - 95 +249 Unknown_Attribute PO--CK 000 000 000 - 51 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 54 Celsius +Power Cycle Min/Max Temperature: 39/59 Celsius +Lifetime Min/Max Temperature: 14/69 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (123) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x010 4 1518 --- Power-on Hours +0x01 0x018 6 293788269 --- Logical Sectors Written +0x01 0x020 6 411213550 --- Number of Write Commands +0x01 0x028 6 167464710 --- Logical Sectors Read +0x01 0x030 6 5523744 --- Number of Read Commands +0x01 0x038 6 1171875007 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 54 --- Current Temperature +0x05 0x010 1 52 --- Average Short Term Temperature +0x05 0x018 1 52 --- Average Long Term Temperature +0x05 0x020 1 69 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 60 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 60 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 51 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 51 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 314 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ATP/SATA/SATA III mSATA/6F76298E3B2C b/SSD/ATP/SATA/SATA III mSATA/6F76298E3B2C new file mode 100644 index 000000000..03e771c91 --- /dev/null +++ b/SSD/ATP/SATA/SATA III mSATA/6F76298E3B2C @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ATP SATA III mSATA +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMB1.1 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 11:10:40 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13099 + 12 Power_Cycle_Count -O--C- 100 100 000 - 31 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 076 076 010 - 35 +173 Unknown_Attribute -O--C- 100 100 000 - 26280385 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 29 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 59 +241 Total_LBAs_Written -O--C- 100 100 000 - 7805 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 13099 --- Power-on Hours +0x01 0x018 6 16369422069 --- Logical Sectors Written +0x01 0x028 6 86290535 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ATP/Velocity MIV/Velocity MIV 60GB/BEF0376270D8 b/SSD/ATP/Velocity MIV/Velocity MIV 60GB/BEF0376270D8 new file mode 100644 index 000000000..ae601d9d1 --- /dev/null +++ b/SSD/ATP/Velocity MIV/Velocity MIV 60GB/BEF0376270D8 @@ -0,0 +1,164 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: ATP Velocity MIV 60GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 110719 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 25 04:11:15 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 090 090 050 - 0/2508570 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 061 061 000 - 34946h+31m+55.940s + 12 Power_Cycle_Count -O--CK 100 100 000 - 186 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 43 +177 Wear_Range_Delta ------ 000 000 000 - 5 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 128 129 000 - 128 (0 127 0 129 0) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/2508570 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/2508570 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/2508570 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 2558 +234 SandForce_Internal -O--CK 000 000 000 - 1672 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 1672 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 5228 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Acer/SSD RE100/SSD RE100 2.5 256GB/6D881C048C2D b/SSD/Acer/SSD RE100/SSD RE100 2.5 256GB/6D881C048C2D new file mode 100644 index 000000000..b781793ba --- /dev/null +++ b/SSD/Acer/SSD RE100/SSD RE100 2.5 256GB/6D881C048C2D @@ -0,0 +1,183 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Acer SSD RE100 2.5 256GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN21046 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 17 20:21:06 2025 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 111 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 23199846 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 4295819268 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 4 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 846 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 11 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 13 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 4 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 0 +210 Unknown_Attribute -O--CK 200 200 000 - 0 +211 Unknown_Attribute -O--CK 200 200 000 - 0 +231 Unknown_SSD_Attribute PO---K 100 100 005 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 309 +242 Total_LBAs_Read -O--CK 100 100 000 - 72 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (311) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 111 --- Power-on Hours +0x01 0x018 6 649532978 --- Logical Sectors Written +0x01 0x020 6 23136366 --- Number of Write Commands +0x01 0x028 6 152666023 --- Logical Sectors Read +0x01 0x030 6 2443122 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Acer/SSD SA100/SSD SA100 480GB/7F0C7EC390DC b/SSD/Acer/SSD SA100/SSD SA100 480GB/7F0C7EC390DC new file mode 100644 index 000000000..ece86461e --- /dev/null +++ b/SSD/Acer/SSD SA100/SSD SA100 480GB/7F0C7EC390DC @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Acer SSD SA100 480GB +Serial Number: -- +Firmware Version: X0826A0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 4 07:13:01 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 88 + 12 Power_Cycle_Count -O--CK 100 100 050 - 19 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 223 +164 Unknown_Attribute -O--CK 100 100 050 - 74 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 13 +194 Temperature_Celsius -O---K 100 100 050 - 33 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 521 +242 Total_LBAs_Read ----CK 100 100 050 - 326 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 33/33 Celsius +Lifetime Min/Max Temperature: 22/32 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 88 --- Power-on Hours +0x01 0x018 6 34180936 --- Logical Sectors Written +0x01 0x020 6 548444 --- Number of Write Commands +0x01 0x028 6 21373724 --- Logical Sectors Read +0x01 0x030 6 351076 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Acer/SSD SA100/SSD SA100 960GB/A502E3198583 b/SSD/Acer/SSD SA100/SSD SA100 960GB/A502E3198583 new file mode 100644 index 000000000..d7f186c8a --- /dev/null +++ b/SSD/Acer/SSD SA100/SSD SA100 960GB/A502E3198583 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Acer SSD SA100 960GB +Serial Number: -- +Firmware Version: V0920A0 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Mar 4 14:48:19 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4275 + 12 Power_Cycle_Count -O--CK 100 100 050 - 2538 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 60906 +165 Unknown_Attribute -O--CK 100 100 050 - 110 +166 Unknown_Attribute -O--CK 100 100 050 - 70 +167 Unknown_Attribute -O--CK 100 100 050 - 106 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 1200 +194 Temperature_Celsius -O---K 100 100 050 - 32 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 888565 +242 Total_LBAs_Read ----CK 100 100 050 - 706239 +245 Unknown_Attribute -O--CK 100 100 050 - 1167204 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 689 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 25/71 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2538 --- Lifetime Power-On Resets +0x01 0x010 4 4275 --- Power-on Hours +0x01 0x018 6 2398475745 --- Logical Sectors Written +0x01 0x020 6 389455206 --- Number of Write Commands +0x01 0x028 6 3334423988 --- Logical Sectors Read +0x01 0x030 6 568289179 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 3 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Advantech/SQF-S25/SQF-S25M4-64G-S9C/C26CC7821D1C b/SSD/Advantech/SQF-S25/SQF-S25M4-64G-S9C/C26CC7821D1C new file mode 100644 index 000000000..dfd6b93b5 --- /dev/null +++ b/SSD/Advantech/SQF-S25/SQF-S25M4-64G-S9C/C26CC7821D1C @@ -0,0 +1,136 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SQF-S25M4-64G-S9C +Serial Number: -- +Firmware Version: S9FMA029 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 9 14:44:14 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 44) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9819 + 12 Power_Cycle_Count -O--C- 100 100 000 - 94 + 14 Unknown_Attribute -O--C- 100 100 000 - 138018816 + 15 Unknown_Attribute -O--C- 100 100 000 - 125045424 + 16 Unknown_Attribute -O--C- 100 100 000 - 93 + 17 Unknown_Attribute -O--C- 100 100 000 - 70 +100 Unknown_Attribute -O--C- 100 100 000 - 9802695 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 075 075 010 - 120 +173 Unknown_Attribute -O--C- 100 100 000 - 76220535 +174 Unknown_Attribute -O--C- 100 100 000 - 18 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 18 +194 Temperature_Celsius PO---K 070 070 000 - 30 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 61 +234 Unknown_Attribute PO-R-- 100 100 000 - 654345 +235 Unknown_Attribute PO-R-- 100 100 000 - 60347457 +241 Total_LBAs_Written -O--CK 000 000 000 - 34049489 +242 Total_LBAs_Read -O--C- 100 100 000 - 654345 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 38 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Advantech/SQF-SLMV1/SQF-SLMV1-64G-SBE/7FE5A393C0CF b/SSD/Advantech/SQF-SLMV1/SQF-SLMV1-64G-SBE/7FE5A393C0CF new file mode 100644 index 000000000..b6de1047d --- /dev/null +++ b/SSD/Advantech/SQF-SLMV1/SQF-SLMV1-64G-SBE/7FE5A393C0CF @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SQF-SLMV1-64G-SBE +Serial Number: -- +Firmware Version: SBFMA613 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 25 17:10:36 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 617 + 12 Power_Cycle_Count -O--C- 100 100 000 - 307 + 14 Unknown_Attribute -O--C- 100 100 000 - 125045424 + 15 Unknown_Attribute -O--C- 100 100 000 - 125045424 + 16 Unknown_Attribute -O--C- 100 100 000 - 138 + 17 Unknown_Attribute -O--C- 100 100 000 - 128 +100 Unknown_Attribute -O--C- 100 100 000 - 4910 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 27 +173 Unknown_Attribute -O--C- 100 100 000 - 196613 +174 Unknown_Attribute -O--C- 100 100 000 - 28 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 28 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +194 Temperature_Celsius PO---K 049 033 000 - 51 (Min/Max 15/67) +202 Unknown_SSD_Attribute -O--C- 100 100 050 - 1 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +234 Unknown_Attribute PO-R-- 100 100 000 - 872192472 +235 Unknown_Attribute PO-R-- 100 100 000 - 302636288 +241 Total_LBAs_Written -O--C- 100 100 000 - 425282204 +242 Total_LBAs_Read -O--C- 100 100 000 - 92706761 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 307 --- Lifetime Power-On Resets +0x01 0x010 4 617 --- Power-on Hours +0x01 0x018 6 425282204 --- Logical Sectors Written +0x01 0x028 6 92706761 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 51 --- Current Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 895 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Advantech/SQF-SM8/SQF-SM8M1-32G-SBC/34D0CB55664A b/SSD/Advantech/SQF-SM8/SQF-SM8M1-32G-SBC/34D0CB55664A new file mode 100644 index 000000000..5501c4df4 --- /dev/null +++ b/SSD/Advantech/SQF-SM8/SQF-SM8M1-32G-SBC/34D0CB55664A @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SQF-SM8M1-32G-SBC +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMA010 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 9 02:02:51 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 42651 + 12 Power_Cycle_Count -O--C- 100 100 000 - 230 + 14 Unknown_Attribute -O--C- 100 100 000 - 62533296 + 15 Unknown_Attribute -O--C- 100 100 000 - 62533296 + 16 Unknown_Attribute -O--C- 100 100 000 - 117 + 17 Unknown_Attribute -O--C- 100 100 000 - 107 +100 Unknown_Attribute -O--C- 100 100 000 - 928867 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 092 092 010 - 30 +173 Unknown_Attribute -O--C- 100 100 000 - 29164056 +174 Unknown_Attribute -O--C- 100 100 000 - 210 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 210 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +194 Temperature_Celsius PO---K 067 051 000 - 33 (Min/Max 22/49) +202 Unknown_SSD_Attribute -O--C- 100 100 050 - 15 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 85 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +234 Unknown_Attribute PO-R-- 100 100 000 - 177728754720 +235 Unknown_Attribute PO-R-- 100 100 000 - 20517014240 +241 Total_LBAs_Written -O--C- 100 100 000 - 12040433337 +242 Total_LBAs_Read -O--C- 100 100 000 - 120136104 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 230 --- Lifetime Power-On Resets +0x01 0x010 4 42651 --- Power-on Hours +0x01 0x018 6 12040433337 --- Logical Sectors Written +0x01 0x028 6 120136104 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Advantech/SQF-SMSM4/SQF-SMSM4-128G-S9C/5E29867589FC b/SSD/Advantech/SQF-SMSM4/SQF-SMSM4-128G-S9C/5E29867589FC new file mode 100644 index 000000000..d1a99b363 --- /dev/null +++ b/SSD/Advantech/SQF-SMSM4/SQF-SMSM4-128G-S9C/5E29867589FC @@ -0,0 +1,136 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SQF-SMSM4-128G-S9C +Serial Number: -- +Firmware Version: S9FMA028 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 1 22:13:43 2026 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 44) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7295 + 12 Power_Cycle_Count -O--C- 100 100 000 - 52 + 14 Unknown_Attribute -O--C- 100 100 000 - 276037632 + 15 Unknown_Attribute -O--C- 100 100 000 - 250069680 + 16 Unknown_Attribute -O--C- 100 100 000 - 93 + 17 Unknown_Attribute -O--C- 100 100 000 - 78 +100 Unknown_Attribute -O--C- 100 100 000 - 3733544 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 083 083 010 - 124 +173 Unknown_Attribute -O--C- 100 100 000 - 14491436 +174 Unknown_Attribute -O--C- 100 100 000 - 7 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 7 +194 Temperature_Celsius PO---K 070 070 000 - 30 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 92 +234 Unknown_Attribute PO-R-- 100 100 000 - 3415066 +235 Unknown_Attribute PO-R-- 100 100 000 - 16979159 +241 Total_LBAs_Written -O--CK 000 000 000 - 11473337 +242 Total_LBAs_Read -O--C- 100 100 000 - 3415066 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Advantech/SQF-SMSU4/SQF-SMSU4-32G-S8E/BE35EA0F89E5 b/SSD/Advantech/SQF-SMSU4/SQF-SMSU4-32G-S8E/BE35EA0F89E5 new file mode 100644 index 000000000..006b19944 --- /dev/null +++ b/SSD/Advantech/SQF-SMSU4/SQF-SMSU4-32G-S8E/BE35EA0F89E5 @@ -0,0 +1,117 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SQF-SMSU4-32G-S8E +Serial Number: -- +Firmware Version: S8FMU6A7 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s +Local Time is: Thu Jan 30 13:30:44 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 255) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7 + 12 Power_Cycle_Count -O--C- 100 100 000 - 40 +168 Unknown_Attribute -O--C- 100 100 000 - 3 +170 Unknown_Attribute PO---- 100 100 010 - 64 +173 Unknown_Attribute -O--C- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 5 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/AirDisk/128/128GB SSD/44BC84EB4FBD b/SSD/AirDisk/128/128GB SSD/44BC84EB4FBD new file mode 100644 index 000000000..a82a6bde9 --- /dev/null +++ b/SSD/AirDisk/128/128GB SSD/44BC84EB4FBD @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AirDisk 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: V4.1.13 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 12 18:45:41 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7054 + 12 Power_Cycle_Count -O--C- 100 100 000 - 28 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 29 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 17184784414 +165 Unknown_Attribute ------ 100 100 000 - 75 +166 Unknown_Attribute ------ 100 100 000 - 4 +167 Unknown_Attribute -O---K 100 100 000 - 30 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 099 099 010 - 99 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 18 +194 Temperature_Celsius -O---K 048 048 000 - 48 (Min/Max 18/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 31603 +242 Total_LBAs_Read -O--CK 100 100 000 - 2581 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (34) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 7054 --- Power-on Hours +0x01 0x018 6 2071162604 --- Logical Sectors Written +0x01 0x020 6 40667267 --- Number of Write Commands +0x01 0x028 6 169172582 --- Logical Sectors Read +0x01 0x030 6 6879238 --- Number of Read Commands +0x01 0x038 6 6493574422776 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/AirDisk/128/128GB SSD/985632401458 b/SSD/AirDisk/128/128GB SSD/985632401458 new file mode 100644 index 000000000..f5bef5df7 --- /dev/null +++ b/SSD/AirDisk/128/128GB SSD/985632401458 @@ -0,0 +1,171 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AirDisk 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: V2.1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 10 18:05:40 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 19 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 497 + 12 Power_Cycle_Count -O--C- 100 100 000 - 37 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 27 +194 Temperature_Celsius -O---K 034 034 000 - 34 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 0 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 6 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 3 +241 Total_LBAs_Written -O--CK 100 100 000 - 109 +242 Total_LBAs_Read -O--CK 100 100 000 - 216 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (264) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 497 --- Power-on Hours +0x01 0x018 6 230557519 --- Logical Sectors Written +0x01 0x020 6 4015257 --- Number of Write Commands +0x01 0x028 6 454566948 --- Logical Sectors Read +0x01 0x030 6 16772002 --- Number of Read Commands +0x01 0x038 6 457050931576 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/AirDisk/512/512GB SSD/932E6AE3C675 b/SSD/AirDisk/512/512GB SSD/932E6AE3C675 new file mode 100644 index 000000000..2016ade14 --- /dev/null +++ b/SSD/AirDisk/512/512GB SSD/932E6AE3C675 @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: AirDisk 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN14546 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 13 10:56:33 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 10677 + 12 Power_Cycle_Count -O--C- 100 100 000 - 120 +164 Unknown_Attribute ------ 100 100 000 - 2478264615856 +165 Unknown_Attribute ------ 100 100 000 - 1045 +166 Unknown_Attribute ------ 100 100 000 - 577 +167 Unknown_Attribute -O---K 100 100 000 - 944 +194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 23/39) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 12767 +242 Total_LBAs_Read -O--CK 100 100 000 - 1775 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (217) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 120 --- Lifetime Power-On Resets +0x01 0x010 4 10677 --- Power-on Hours +0x01 0x018 6 26774838048 --- Logical Sectors Written +0x01 0x020 6 246806169 --- Number of Write Commands +0x01 0x028 6 3723289710 --- Logical Sectors Read +0x01 0x030 6 27900519 --- Number of Read Commands +0x01 0x038 6 9119474851640 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 139 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 33 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/16/16GB SATA Flash Drive/19C30E3767E9 b/SSD/Apacer/16/16GB SATA Flash Drive/19C30E3767E9 new file mode 100644 index 000000000..59035d53b --- /dev/null +++ b/SSD/Apacer/16/16GB SATA Flash Drive/19C30E3767E9 @@ -0,0 +1,102 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer SDM4 Series SSD Module +Device Model: 16GB SATA Flash Drive +Serial Number: -- +Firmware Version: SFDDA01C +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Jun 1 22:01:19 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 16777215 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4466 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 152 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip PO---- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 040 100 000 - 40 (Min/Max 30/60) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +160 Initial_Bad_Block_Count ------ 100 100 010 - 74 +161 Bad_Block_Count ------ 100 100 010 - 74 +162 Spare_Block_Count ------ 100 100 005 - 178 +163 Max_Erase_Count ------ 100 100 001 - 1423 +164 Average_Erase_Count ------ 100 100 001 - 1346 +165 Average_Erase_Count ------ 100 100 001 - 1346 +241 Total_LBAs_Written ------ 100 100 000 - 1060927849 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Apacer/16/16GB SATA Flash Drive/28094A92E082 b/SSD/Apacer/16/16GB SATA Flash Drive/28094A92E082 new file mode 100644 index 000000000..8f5a3512f --- /dev/null +++ b/SSD/Apacer/16/16GB SATA Flash Drive/28094A92E082 @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-STABLE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 16GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFDK002A +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 19 18:53:26 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 16225 + 12 Power_Cycle_Count -O--C- 100 100 000 - 89 +163 Unknown_Attribute ------ 100 100 001 - 202 +164 Unknown_Attribute ------ 100 100 001 - 95 +166 Unknown_Attribute ------ 100 100 010 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 57 +194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 30/60) +241 Total_LBAs_Written -O--CK 100 100 000 - 2891205287 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (121) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 89 --- Lifetime Power-On Resets +0x01 0x018 6 2891205287 --- Logical Sectors Written +0x01 0x020 6 13845165 --- Number of Write Commands +0x01 0x028 6 1832346006 --- Logical Sectors Read +0x01 0x030 6 7784293 --- Number of Read Commands +0x01 0x038 6 58410000000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC + + + diff --git a/SSD/Apacer/16/16GB SATA Flash Drive/408081410804 b/SSD/Apacer/16/16GB SATA Flash Drive/408081410804 new file mode 100644 index 000000000..8fa4fc9f3 --- /dev/null +++ b/SSD/Apacer/16/16GB SATA Flash Drive/408081410804 @@ -0,0 +1,140 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 16GB SATA Flash Drive +Serial Number: -- +Firmware Version: SFPS921D +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sun Nov 23 22:29:40 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 2047 + 12 Power_Cycle_Count -O--C- 100 100 000 - 11080 +163 Unknown_Attribute ------ 100 100 000 - 28 +164 Unknown_Attribute ------ 100 100 000 - 8 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 7 +194 Temperature_Celsius PO---K 070 070 000 - 30 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 186818811 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/16/16GB SATA Flash Drive/D6EAD65B1547 b/SSD/Apacer/16/16GB SATA Flash Drive/D6EAD65B1547 new file mode 100644 index 000000000..651cd9bb8 --- /dev/null +++ b/SSD/Apacer/16/16GB SATA Flash Drive/D6EAD65B1547 @@ -0,0 +1,96 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 16GB SATA Flash Drive +Serial Number: -- +Firmware Version: SFDDA01A +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Unavailable +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue May 27 14:17:49 2025 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 16777215 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6949 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 231 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip PO---- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 040 100 000 - 40 (Min/Max 30/60) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +160 Unknown_Attribute ------ 100 100 010 - 8 +161 Unknown_Attribute ------ 100 100 010 - 8 +162 Unknown_Attribute ------ 100 100 005 - 254 +163 Unknown_Attribute ------ 100 100 001 - 452 +164 Unknown_Attribute ------ 100 100 001 - 361 +165 Unknown_Attribute ------ 100 100 001 - 361 +241 Total_LBAs_Written ------ 100 100 000 - 1269665351 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Apacer/16/16GB SATA Flash Drive/F9F5BAC348C1 b/SSD/Apacer/16/16GB SATA Flash Drive/F9F5BAC348C1 new file mode 100644 index 000000000..0acd47e3c --- /dev/null +++ b/SSD/Apacer/16/16GB SATA Flash Drive/F9F5BAC348C1 @@ -0,0 +1,102 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer SDM4 Series SSD Module +Device Model: 16GB SATA Flash Drive +Serial Number: -- +Firmware Version: SFDDA01C +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue May 27 21:36:22 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 16777215 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6968 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1721 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip PO---- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 040 100 000 - 40 (Min/Max 30/60) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +160 Initial_Bad_Block_Count ------ 100 100 010 - 276 +161 Bad_Block_Count ------ 100 100 010 - 262 +162 Spare_Block_Count ------ 100 100 005 - 0 +163 Max_Erase_Count ------ 100 100 001 - 24676 +164 Average_Erase_Count ------ 100 100 001 - 22818 +165 Average_Erase_Count ------ 100 100 001 - 22818 +241 Total_LBAs_Written ------ 100 100 000 - 10381266219 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Apacer/256/256GB SATA Flash Drive/6FB538ED5D42 b/SSD/Apacer/256/256GB SATA Flash Drive/6FB538ED5D42 new file mode 100644 index 000000000..0a83ceaca --- /dev/null +++ b/SSD/Apacer/256/256GB SATA Flash Drive/6FB538ED5D42 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 256GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 6 a20b02 ... +Firmware Version: SFDN004E +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 23 22:53:32 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 1641 + 12 Power_Cycle_Count -O--CK 100 100 000 - 335 +163 Unknown_Attribute -O--CK 100 100 000 - 53 +164 Unknown_Attribute -O--CK 100 100 000 - 2 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 321 +194 Temperature_Celsius -O---K 100 100 000 - 29 (Min/Max 29/29) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 614222165 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 335 --- Lifetime Power-On Resets +0x01 0x018 6 614222165 --- Logical Sectors Written +0x01 0x020 6 2034876 --- Number of Write Commands +0x01 0x028 6 503277797 --- Logical Sectors Read +0x01 0x030 6 2022129 --- Number of Read Commands +0x01 0x038 6 5907600000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 769 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/256/256GB SATA Flash Drive/E680DF54BD88 b/SSD/Apacer/256/256GB SATA Flash Drive/E680DF54BD88 new file mode 100644 index 000000000..295b0c028 --- /dev/null +++ b/SSD/Apacer/256/256GB SATA Flash Drive/E680DF54BD88 @@ -0,0 +1,167 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 256GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 0 81ba00 ... +Firmware Version: SFDN004E +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 23 07:42:54 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 28 + 12 Power_Cycle_Count -O--CK 100 100 000 - 51 +163 Unknown_Attribute -O--CK 100 100 000 - 5 +164 Unknown_Attribute -O--CK 100 100 000 - 2 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 42 +194 Temperature_Celsius -O---K 100 100 000 - 42 (Min/Max 31/45) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 566899193 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x018 6 566425327 --- Logical Sectors Written +0x01 0x020 6 2761329 --- Number of Write Commands +0x01 0x028 6 510710427 --- Logical Sectors Read +0x01 0x030 6 2192387 --- Number of Read Commands +0x01 0x038 6 100800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 186 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/256/256GB SATA Flash Drive/F1DE40A2706C b/SSD/Apacer/256/256GB SATA Flash Drive/F1DE40A2706C new file mode 100644 index 000000000..37c54aa43 --- /dev/null +++ b/SSD/Apacer/256/256GB SATA Flash Drive/F1DE40A2706C @@ -0,0 +1,167 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 256GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 6 620600 ... +Firmware Version: SFDN007E +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 26 21:26:01 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 7 + 12 Power_Cycle_Count -O--CK 100 100 000 - 209 +163 Unknown_Attribute -O--CK 100 100 000 - 5 +164 Unknown_Attribute -O--CK 100 100 000 - 2 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 201 +194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 32/33) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 524635446 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 209 --- Lifetime Power-On Resets +0x01 0x018 6 524581262 --- Logical Sectors Written +0x01 0x020 6 2019207 --- Number of Write Commands +0x01 0x028 6 501715597 --- Logical Sectors Read +0x01 0x030 6 1993656 --- Number of Read Commands +0x01 0x038 6 25200000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/32/32GB SATA Flash Drive/7C9C4631DDB0 b/SSD/Apacer/32/32GB SATA Flash Drive/7C9C4631DDB0 new file mode 100644 index 000000000..0863938c7 --- /dev/null +++ b/SSD/Apacer/32/32GB SATA Flash Drive/7C9C4631DDB0 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 32GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 0 512400 ... +Firmware Version: SFDM105B +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Nov 21 10:01:19 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 12) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 2843 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2058 +163 Unknown_Attribute -O--CK 100 100 000 - 377 +164 Unknown_Attribute -O--CK 100 100 000 - 239 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1447 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 30/60) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 93 +241 Total_LBAs_Written -O--CK 100 100 000 - 3123911391 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2058 --- Lifetime Power-On Resets +0x01 0x018 6 3100240534 --- Logical Sectors Written +0x01 0x020 6 48015362 --- Number of Write Commands +0x01 0x028 6 653096733 --- Logical Sectors Read +0x01 0x030 6 13901589 --- Number of Read Commands +0x01 0x038 6 10234800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/1CFD243FE5DC b/SSD/Apacer/64/64GB SATA Flash Drive/1CFD243FE5DC new file mode 100644 index 000000000..613983f0a --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/1CFD243FE5DC @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 64GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 6 71e200 ... +Firmware Version: SFDN004G +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 18 20:41:28 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 24) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 104 + 12 Power_Cycle_Count -O--CK 100 100 000 - 35 +163 Unknown_Attribute -O--CK 100 100 000 - 7 +164 Unknown_Attribute -O--CK 100 100 000 - 4 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 23 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 30/60) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 170743495 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x018 6 170656183 --- Logical Sectors Written +0x01 0x020 6 1185453 --- Number of Write Commands +0x01 0x028 6 260346441 --- Logical Sectors Read +0x01 0x030 6 842850 --- Number of Read Commands +0x01 0x038 6 374400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 114 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/735F8D032BEC b/SSD/Apacer/64/64GB SATA Flash Drive/735F8D032BEC new file mode 100644 index 000000000..5aa14b3ac --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/735F8D032BEC @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer SSDs +Device Model: 64GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFMB011B +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 13 17:34:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14553 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +175 Bad_Cluster_Table_Ct -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 100 100 000 - 19 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 19 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 368 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 054 039 030 - 46 (Min/Max 20/61) +195 Hardware_ECC_Recovered POSR-K 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +238 Unknown_Attribute -O---K 100 100 000 - 196608019 +239 Unknown_Attribute PO---- 100 100 015 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 3736985686 +242 Total_LBAs_Read -O--CK 100 100 000 - 1678690522 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: ?/52 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (78) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 54 --- Lifetime Power-On Resets +0x01 0x010 4 14553 --- Power-on Hours +0x01 0x018 6 3736985686 --- Logical Sectors Written +0x01 0x020 6 160122498 --- Number of Write Commands +0x01 0x028 6 1678690522 --- Logical Sectors Read +0x01 0x030 6 30269912 --- Number of Read Commands +0x01 0x038 6 13409736823760 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/89F6B33B6C61 b/SSD/Apacer/64/64GB SATA Flash Drive/89F6B33B6C61 new file mode 100644 index 000000000..4c0a9d6d2 --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/89F6B33B6C61 @@ -0,0 +1,172 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 64GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFDM1B4D +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 20 13:07:33 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 24) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 28358 + 12 Power_Cycle_Count -O--CK 100 100 000 - 193 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 100 100 000 - 40436466 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 495 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 30/60) +195 Hardware_ECC_Recovered POSR-K 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +238 Unknown_Attribute -O---K 080 080 000 - 196608617 +241 Total_LBAs_Written -O--CK 100 100 000 - 13358256721 +242 Total_LBAs_Read -O--CK 100 100 000 - 16760726416 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 28358 - +# 2 Short offline Completed without error 00% 28019 - +# 3 Short offline Interrupted (host reset) 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 193 --- Lifetime Power-On Resets +0x01 0x018 6 13354226833 --- Logical Sectors Written +0x01 0x020 6 730130180 --- Number of Write Commands +0x01 0x028 6 16759862906 --- Logical Sectors Read +0x01 0x030 6 234953780 --- Number of Read Commands +0x01 0x038 6 102088800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 30 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/8F145BCCBF9F b/SSD/Apacer/64/64GB SATA Flash Drive/8F145BCCBF9F new file mode 100644 index 000000000..39e102f7a --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/8F145BCCBF9F @@ -0,0 +1,171 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 64GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFDM1B4D +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 18:32:23 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 24) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 19286 + 12 Power_Cycle_Count -O--CK 100 100 000 - 76 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 100 100 000 - 31523430 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 494 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 30/60) +195 Hardware_ECC_Recovered POSR-K 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +238 Unknown_Attribute -O---K 084 084 000 - 196608481 +241 Total_LBAs_Written -O--CK 100 100 000 - 11178083826 +242 Total_LBAs_Read -O--CK 100 100 000 - 3401375635 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x018 6 11175065178 --- Logical Sectors Written +0x01 0x020 6 700901624 --- Number of Write Commands +0x01 0x028 6 3400667149 --- Logical Sectors Read +0x01 0x030 6 75640687 --- Number of Read Commands +0x01 0x038 6 69429600000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/C94B14B30E99 b/SSD/Apacer/64/64GB SATA Flash Drive/C94B14B30E99 new file mode 100644 index 000000000..aa48fcc82 --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/C94B14B30E99 @@ -0,0 +1,143 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 64GB SATA Flash Drive +Serial Number: -- +Firmware Version: SFPS928D +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 25 16:04:50 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 35271 + 12 Power_Cycle_Count -O--C- 100 100 000 - 860 +163 Unknown_Attribute ------ 100 100 000 - 8205 +164 Unknown_Attribute ------ 100 100 000 - 100 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 15 +194 Temperature_Celsius PO---K 070 070 000 - 30 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 +241 Total_LBAs_Written -O--C- 100 100 000 - 1833321763 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/DA408691F8EE b/SSD/Apacer/64/64GB SATA Flash Drive/DA408691F8EE new file mode 100644 index 000000000..a4aca910c --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/DA408691F8EE @@ -0,0 +1,176 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer SSDs +Device Model: 64GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFMB614X +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 16 10:05:08 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 4153 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +163 Maximum_Erase_Count -O--CK 100 100 000 - 233 +164 Average_Erase_Count -O--CK 100 100 000 - 133 +166 Total_Later_Bad_Blk_Ct -O--CK 100 100 000 - 0 +167 SSD_Protect_Mode -O--CK 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +175 Bad_Cluster_Table_Ct -O--CK 100 100 000 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 49 +194 Temperature_Celsius -O---K 069 047 030 - 31 (Min/Max 16/53) +231 Lifetime_Left -O--C- 100 100 000 - 96 +241 Total_LBAs_Written -O--CK 100 100 000 - 17058202772 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/33 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (235) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x010 4 4153 --- Power-on Hours +0x01 0x018 6 17058202772 --- Logical Sectors Written +0x01 0x020 6 102073999 --- Number of Write Commands +0x01 0x028 6 1594039353 --- Logical Sectors Read +0x01 0x030 6 22219931 --- Number of Read Commands +0x01 0x038 6 3751272135520 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/64/64GB SATA Flash Drive/DC59B4E7E6A7 b/SSD/Apacer/64/64GB SATA Flash Drive/DC59B4E7E6A7 new file mode 100644 index 000000000..cdcd49cd2 --- /dev/null +++ b/SSD/Apacer/64/64GB SATA Flash Drive/DC59B4E7E6A7 @@ -0,0 +1,184 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 64GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFDM1B4D +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 9 12:26:35 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 24) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21978 + 12 Power_Cycle_Count -O--CK 100 100 000 - 117 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 100 100 000 - 16318845 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 496 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 30/60) +195 Hardware_ECC_Recovered POSR-K 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +238 Unknown_Attribute -O---K 092 092 000 - 196608249 +241 Total_LBAs_Written -O--CK 100 100 000 - 19594950057 +242 Total_LBAs_Read -O--CK 100 100 000 - 536723757 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18940 - +# 2 Short offline Completed without error 00% 13533 - +# 3 Short offline Completed without error 00% 11782 - +# 4 Short offline Completed without error 00% 10748 - +# 5 Short offline Completed without error 00% 9991 - +# 6 Short offline Aborted by host 60% 9991 - +# 7 Short offline Aborted by host 80% 9991 - +# 8 Short offline Completed without error 00% 9991 - +# 9 Short offline Completed without error 00% 504 - +#10 Extended offline Aborted by host 60% 504 - +#11 Short offline Completed without error 00% 504 - +#12 Short offline Completed without error 00% 504 - +#13 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 117 --- Lifetime Power-On Resets +0x01 0x018 6 19594505153 --- Logical Sectors Written +0x01 0x020 6 335111260 --- Number of Write Commands +0x01 0x028 6 536105690 --- Logical Sectors Read +0x01 0x030 6 9025972 --- Number of Read Commands +0x01 0x038 6 79120800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/8/8GB SATA Flash Drive/77F21E752AB6 b/SSD/Apacer/8/8GB SATA Flash Drive/77F21E752AB6 new file mode 100644 index 000000000..7e48ba973 --- /dev/null +++ b/SSD/Apacer/8/8GB SATA Flash Drive/77F21E752AB6 @@ -0,0 +1,143 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 8GB SATA Flash Drive +Serial Number: -- +Firmware Version: SFPS921D +User Capacity: 8,012,390,400 bytes [8.01 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 18:56:01 2025 WET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 14015 + 12 Power_Cycle_Count -O--C- 100 100 000 - 175 +163 Unknown_Attribute ------ 100 100 000 - 167 +164 Unknown_Attribute ------ 100 100 000 - 75 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius PO---K 070 070 000 - 30 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 +241 Total_LBAs_Written -O--C- 100 100 000 - 489696018 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Apacer/8/8GB SATA Flash Drive/E9C746ABA9E7 b/SSD/Apacer/8/8GB SATA Flash Drive/E9C746ABA9E7 new file mode 100644 index 000000000..e223abc0b --- /dev/null +++ b/SSD/Apacer/8/8GB SATA Flash Drive/E9C746ABA9E7 @@ -0,0 +1,146 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 8GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFDN0B2A +User Capacity: 8,012,390,400 bytes [8.01 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 7 06:40:39 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 31795 + 12 Power_Cycle_Count -O--C- 100 100 000 - 208 +163 Unknown_Attribute -O--C- 100 100 000 - 56973 +164 Unknown_Attribute -O--C- 100 100 000 - 728 +166 Unknown_Attribute -O--C- 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 191 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 30/60) +241 Total_LBAs_Written -O--CK 100 100 000 - 222592223 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 208 --- Lifetime Power-On Resets +0x01 0x018 6 219824535 --- Logical Sectors Written +0x01 0x020 6 6305131 --- Number of Write Commands +0x01 0x028 6 125244647 --- Logical Sectors Read +0x01 0x030 6 4614967 --- Number of Read Commands +0x01 0x038 6 114462000000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 197 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/APM050/APM050GMFAN-4MTM1/34C6D77534C6 b/SSD/Apacer/APM050/APM050GMFAN-4MTM1/34C6D77534C6 new file mode 100644 index 000000000..da90c531a --- /dev/null +++ b/SSD/Apacer/APM050/APM050GMFAN-4MTM1/34C6D77534C6 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: APM050GMFAN-4MTM1 +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: SFDM104M +User Capacity: 53,687,091,200 bytes [53.6 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 21 14:05:06 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 20054 + 12 Power_Cycle_Count -O--CK 100 100 000 - 93 +163 Unknown_Attribute -O--CK 100 100 000 - 331 +164 Unknown_Attribute -O--CK 100 100 000 - 243 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 2 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 80 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 30/60) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 19743032831 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 93 --- Lifetime Power-On Resets +0x01 0x018 6 19742274479 --- Logical Sectors Written +0x01 0x020 6 2411634437 --- Number of Write Commands +0x01 0x028 6 1928288125 --- Logical Sectors Read +0x01 0x030 6 49406486 --- Number of Read Commands +0x01 0x038 6 72194400000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 2 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 169 Device-to-host register FISes sent due to a COMRESET +0x000f 2 2 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/AS340/AS340 120GB/FCE19CBFCE01 b/SSD/Apacer/AS340/AS340 120GB/FCE19CBFCE01 new file mode 100644 index 000000000..272d77006 --- /dev/null +++ b/SSD/Apacer/AS340/AS340 120GB/FCE19CBFCE01 @@ -0,0 +1,148 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS340 120GB +Serial Number: -- +Firmware Version: U1124A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Nov 4 18:22:40 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 171 + 12 Power_Cycle_Count -O--CK 100 100 050 - 20 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Max_Erase_Count -O--CK 100 100 050 - 6 +164 Average_Erase_Count -O--CK 100 100 050 - 716 +165 Unknown_Attribute -O--CK 100 100 050 - 5 +166 Later_Bad_Block_Count -O--CK 100 100 050 - 2 +167 SSD_Protect_Mode -O--CK 100 100 050 - 2 +168 SATA_PHY_Error_Count -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Bad_Cluster_Table_Count -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O---K 100 100 050 - 35 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 3961 +242 Total_LBAs_Read ----CK 100 100 050 - 995 +245 Unknown_Attribute -O--CK 100 100 050 - 1500 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 171 --- Power-on Hours +0x01 0x018 6 259606214 --- Logical Sectors Written +0x01 0x020 6 1622540 --- Number of Write Commands +0x01 0x028 6 65253188 --- Logical Sectors Read +0x01 0x030 6 825903 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apacer/AS340/AS340 240GB/E17309AFF354 b/SSD/Apacer/AS340/AS340 240GB/E17309AFF354 new file mode 100644 index 000000000..b29606da0 --- /dev/null +++ b/SSD/Apacer/AS340/AS340 240GB/E17309AFF354 @@ -0,0 +1,96 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS340 240GB +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: AP615PE0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 15 14:09:27 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 242 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 200 +163 Max_Erase_Count 0x0032 100 100 000 Old_age Always - 16 +164 Average_Erase_Count 0x0032 100 100 000 Old_age Always - 5 +166 Later_Bad_Block_Count 0x0032 100 100 000 Old_age Always - 0 +167 SSD_Protect_Mode 0x0032 100 100 000 Old_age Always - 0 +168 SATA_PHY_Error_Count 0x0032 100 100 000 Old_age Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +175 Bad_Cluster_Table_Count 0x0032 100 100 000 Old_age Always - 0 +192 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 109 +194 Temperature_Celsius 0x0022 067 067 058 Old_age Always - 33 (Min/Max 33/33) +231 Lifetime_Left 0x0012 100 100 000 Old_age Always - 99 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 1574653346 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Apacer/AS340/AS340 480GB/3151C595057E b/SSD/Apacer/AS340/AS340 480GB/3151C595057E new file mode 100644 index 000000000..d9a7d4bcb --- /dev/null +++ b/SSD/Apacer/AS340/AS340 480GB/3151C595057E @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS340 480GB +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: AP615PE0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 14 11:28:46 2025 +12 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0x5a5e +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 5030 + 12 Power_Cycle_Count -O--CK 100 100 000 - 461 +163 Max_Erase_Count -O--CK 100 100 000 - 17 +164 Average_Erase_Count -O--CK 100 100 000 - 15 +166 Later_Bad_Block_Count -O--CK 100 100 000 - 0 +167 SSD_Protect_Mode -O--CK 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +175 Bad_Cluster_Table_Count -O--CK 100 100 000 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 208 +194 Temperature_Celsius -O---K 067 067 058 - 33 (Min/Max 33/33) +231 Lifetime_Left -O--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 13132275473 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3269 - +# 2 Short offline Completed without error 00% 3269 - +# 3 Short offline Completed without error 00% 3269 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 461 --- Lifetime Power-On Resets +0x01 0x010 4 5030 --- Power-on Hours +0x01 0x018 6 13132275473 --- Logical Sectors Written +0x01 0x028 6 4050204389 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2373 --- Number of Hardware Resets +0x06 0x018 4 94 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/AS350/AS350 128GB/62A75AC5E947 b/SSD/Apacer/AS350/AS350 128GB/62A75AC5E947 new file mode 100644 index 000000000..c98de3903 --- /dev/null +++ b/SSD/Apacer/AS350/AS350 128GB/62A75AC5E947 @@ -0,0 +1,96 @@ +smartctl 7.4 2023-08-01 r5530 [NetBSD 10.1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 128GB +Serial Number: -- +Firmware Version: V0609A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 31 06:24:10 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 391 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 707 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Max_Erase_Count 0x0032 100 100 050 Old_age Always - 24 +164 Average_Erase_Count 0x0032 100 100 050 Old_age Always - 545 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 30 +166 Later_Bad_Block_Count 0x0032 100 100 050 Old_age Always - 9 +167 SSD_Protect_Mode 0x0032 100 100 050 Old_age Always - 28 +168 SATA_PHY_Error_Count 0x0032 100 100 050 Old_age Always - 5050 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Bad_Cluster_Table_Count 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Unexpect_Power_Loss_Ct 0x0032 100 100 050 Old_age Always - 126 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 46 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 33518 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 33413 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 12175 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/Apacer/AS350/AS350 128GB/6BA08C0E21FF b/SSD/Apacer/AS350/AS350 128GB/6BA08C0E21FF new file mode 100644 index 000000000..0b83ae2fe --- /dev/null +++ b/SSD/Apacer/AS350/AS350 128GB/6BA08C0E21FF @@ -0,0 +1,170 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 128GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN11860 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 19 00:20:36 2025 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 010 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 298 + 12 Power_Cycle_Count ------+ 100 100 000 - 337 +164 Average_Erase_Count ------ 100 100 000 - 38657589281 +165 Unknown_Attribute ------ 100 100 000 - 44 +166 Later_Bad_Block_Count ------ 100 100 000 - 9 +167 SSD_Protect_Mode ------+ 100 100 000 - 33 +194 Temperature_Celsius ------+ 048 048 000 - 48 (Min/Max 28/59) +199 UDMA_CRC_Error_Count ------+ 100 100 000 - 0 +241 Total_LBAs_Written ------+ 100 100 000 - 1882 +242 Total_LBAs_Read ------+ 100 100 000 - 1174 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: ?/54 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (240) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 337 --- Lifetime Power-On Resets +0x01 0x010 4 298 --- Power-on Hours +0x01 0x018 6 3948704806 --- Logical Sectors Written +0x01 0x020 6 43287115 --- Number of Write Commands +0x01 0x028 6 2462774451 --- Logical Sectors Read +0x01 0x030 6 38325127 --- Number of Read Commands +0x01 0x038 6 271653120048 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/AS350/AS350 128GB/AF4350385CAC b/SSD/Apacer/AS350/AS350 128GB/AF4350385CAC new file mode 100644 index 000000000..81c0028cd --- /dev/null +++ b/SSD/Apacer/AS350/AS350 128GB/AF4350385CAC @@ -0,0 +1,175 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 128GB +Serial Number: -- +Firmware Version: 1017A +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 5 10:37:46 2025 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 802 + 12 Power_Cycle_Count -O--CK 100 100 050 - 46 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Max_Erase_Count -O--CK 100 100 050 - 7 +164 Average_Erase_Count -O--CK 100 100 050 - 5207 +165 Unknown_Attribute -O--CK 100 100 050 - 24 +166 Later_Bad_Block_Count -O--CK 100 100 050 - 1 +167 SSD_Protect_Mode -O--CK 100 100 050 - 11 +168 SATA_PHY_Error_Count -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Bad_Cluster_Table_Count -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 32 +194 Temperature_Celsius -O---K 100 100 050 - 41 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 1 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 22425 +242 Total_LBAs_Read ----CK 100 100 050 - 1147 +245 Unknown_Attribute -O--CK 100 100 050 - 11106 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 41/41 Celsius +Lifetime Min/Max Temperature: 28/46 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 802 --- Power-on Hours +0x01 0x018 6 1469696113 --- Logical Sectors Written +0x01 0x020 6 13116981 --- Number of Write Commands +0x01 0x028 6 75208636 --- Logical Sectors Read +0x01 0x030 6 1234728 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 38 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apacer/AS350/AS350 256GB/1B3F8C105FCD b/SSD/Apacer/AS350/AS350 256GB/1B3F8C105FCD new file mode 100644 index 000000000..9b1b2f607 --- /dev/null +++ b/SSD/Apacer/AS350/AS350 256GB/1B3F8C105FCD @@ -0,0 +1,158 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Apacer AS350 256GB +Serial Number: -- +Firmware Version: AP613PE0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 31 09:44:49 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 402 + 12 Power_Cycle_Count -O--CK 100 100 000 - 475 +163 Unknown_Attribute -O--CK 100 100 000 - 9 +164 Unknown_Attribute -O--CK 100 100 000 - 8 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 226 +194 Temperature_Celsius -O---K 067 067 058 - 33 (Min/Max 33/33) +231 Unknown_SSD_Attribute -O--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 3963512071 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 475 --- Lifetime Power-On Resets +0x01 0x010 4 402 --- Power-on Hours +0x01 0x018 6 3963512071 --- Logical Sectors Written +0x01 0x028 6 3862834030 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1007 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/AS350/AS350 256GB/5BF92AFEACB4 b/SSD/Apacer/AS350/AS350 256GB/5BF92AFEACB4 new file mode 100644 index 000000000..8d64ce4c8 --- /dev/null +++ b/SSD/Apacer/AS350/AS350 256GB/5BF92AFEACB4 @@ -0,0 +1,169 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 256GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN15330 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 16 22:19:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13277 + 12 Power_Cycle_Count -O--C- 100 100 000 - 77 +164 Average_Erase_Count ------ 100 100 000 - 3509062468638 +165 Unknown_Attribute ------ 100 100 000 - 1132 +166 Later_Bad_Block_Count ------ 100 100 000 - 817 +167 SSD_Protect_Mode -O---K 100 100 000 - 1054 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1405 +242 Total_LBAs_Read -O--CK 100 100 000 - 152 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (358) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 77 --- Lifetime Power-On Resets +0x01 0x010 4 13277 --- Power-on Hours +0x01 0x018 6 2947664289 --- Logical Sectors Written +0x01 0x020 6 65354464 --- Number of Write Commands +0x01 0x028 6 318830323 --- Logical Sectors Read +0x01 0x030 6 7251849 --- Number of Read Commands +0x01 0x038 6 12232619693052 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 151 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 63 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/AS350/AS350 512GB/5479253B5591 b/SSD/Apacer/AS350/AS350 512GB/5479253B5591 new file mode 100644 index 000000000..cf119c45f --- /dev/null +++ b/SSD/Apacer/AS350/AS350 512GB/5479253B5591 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 512GB +Serial Number: -- +Firmware Version: Y0514B0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 24 09:55:24 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 25 + 12 Power_Cycle_Count -O--CK 100 100 050 - 7 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Max_Erase_Count -O--CK 100 100 050 - 16 +164 Average_Erase_Count -O--CK 100 100 050 - 1921 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Later_Bad_Block_Count -O--CK 100 100 050 - 1 +167 SSD_Protect_Mode -O--CK 100 100 050 - 1 +168 SATA_PHY_Error_Count -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Bad_Cluster_Table_Count -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4506 +242 Total_LBAs_Read ----CK 100 100 050 - 67 +245 Unknown_Attribute -O--CK 100 100 050 - 2163 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 25 --- Power-on Hours +0x01 0x018 6 295335832 --- Logical Sectors Written +0x01 0x020 6 4469171 --- Number of Write Commands +0x01 0x028 6 4426288 --- Logical Sectors Read +0x01 0x030 6 79627 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apacer/AS350/AS350 512GB/8377FD151442 b/SSD/Apacer/AS350/AS350 512GB/8377FD151442 new file mode 100644 index 000000000..33e67558d --- /dev/null +++ b/SSD/Apacer/AS350/AS350 512GB/8377FD151442 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 512GB +Serial Number: -- +LU WWN Device Id: 5 dc663a ... +Firmware Version: AP6J5PE0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 24 09:55:24 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 26 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +163 Max_Erase_Count -O--CK 100 100 000 - 1 +164 Average_Erase_Count -O--CK 100 100 000 - 0 +166 Later_Bad_Block_Count -O--CK 100 100 000 - 0 +167 SSD_Protect_Mode -O--CK 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +175 Bad_Cluster_Table_Count -O--CK 100 100 000 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +194 Temperature_Celsius -O---K 067 067 058 - 33 (Min/Max 33/33) +231 Lifetime_Left -O--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 295332707 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 295332707 --- Logical Sectors Written +0x01 0x028 6 4380519 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 15 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Apacer/AS350/AS350 512GB/B3C8C256B133 b/SSD/Apacer/AS350/AS350 512GB/B3C8C256B133 new file mode 100644 index 000000000..544a1127e --- /dev/null +++ b/SSD/Apacer/AS350/AS350 512GB/B3C8C256B133 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apacer AS340/350 SSDs +Device Model: Apacer AS350 512GB +Serial Number: -- +Firmware Version: AP613PE0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jun 29 07:03:14 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 8496 + 12 Power_Cycle_Count -O--CK 100 100 000 - 131 +163 Max_Erase_Count -O--CK 100 100 000 - 53 +164 Average_Erase_Count -O--CK 100 100 000 - 19 +166 Later_Bad_Block_Count -O--CK 100 100 000 - 0 +167 SSD_Protect_Mode -O--CK 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +175 Bad_Cluster_Table_Count -O--CK 100 100 000 - 0 +192 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 95 +194 Temperature_Celsius -O---K 067 067 030 - 33 (Min/Max 33/33) +231 Lifetime_Left -O--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 20951205275 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 131 --- Lifetime Power-On Resets +0x01 0x010 4 8496 --- Power-on Hours +0x01 0x018 6 20951205275 --- Logical Sectors Written +0x01 0x028 6 11138151551 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 619 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 46 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 46 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Apacer/AST280/AST280 240GB/537171E33461 b/SSD/Apacer/AST280/AST280 240GB/537171E33461 new file mode 100644 index 000000000..3ba8a7a39 --- /dev/null +++ b/SSD/Apacer/AST280/AST280 240GB/537171E33461 @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Apacer AST280 240GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: V6.1.10 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 18 19:27:33 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 155 + 12 Power_Cycle_Count -O--C- 100 100 000 - 31 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 36 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 12886147079 +165 Unknown_Attribute ------ 100 100 000 - 19 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 7 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 27 +194 Temperature_Celsius -O---K 041 041 000 - 41 (Min/Max 12/47) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 24551 +242 Total_LBAs_Read -O--CK 100 100 000 - 3812 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: ?/41 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (68) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 155 --- Power-on Hours +0x01 0x018 6 1608976299 --- Logical Sectors Written +0x01 0x020 6 7701233 --- Number of Write Commands +0x01 0x028 6 249858892 --- Logical Sectors Read +0x01 0x030 6 1832014 --- Number of Read Commands +0x01 0x038 6 142292371968 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apple/SSD SD0128/SSD SD0128F/990D3D6BDF72 b/SSD/Apple/SSD SD0128/SSD SD0128F/990D3D6BDF72 new file mode 100644 index 000000000..3f5147390 --- /dev/null +++ b/SSD/Apple/SSD SD0128/SSD SD0128F/990D3D6BDF72 @@ -0,0 +1,100 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SD0128F +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: A222821 +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 3.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 29 11:01:10 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 000 - 0 + 5 Reallocated_Sector_Ct POSR-- 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3758 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13236 +169 Unknown_Apple_Attrib -O---K 100 100 010 - 773268178656 +173 Wear_Leveling_Count -O---K 191 191 100 - 420924620974 +174 Host_Reads_MiB ----CK 100 100 000 - 17091182 +175 Host_Writes_MiB ----CK 100 100 000 - 14273487 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 382 +194 Temperature_Celsius -O---K 032 032 000 - 68 (Min/Max 25/87) +197 Current_Pending_Sector -O--CK 000 000 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +244 Unknown_Attribute -O---- 000 000 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 4 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apple/SSD SD0256/SSD SD0256F/656F114286AA b/SSD/Apple/SSD SD0256/SSD SD0256F/656F114286AA new file mode 100644 index 000000000..3834c4b24 --- /dev/null +++ b/SSD/Apple/SSD SD0256/SSD SD0256F/656F114286AA @@ -0,0 +1,101 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SD0256F +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: A222821 +User Capacity: 251,000,193,024 bytes [251 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 3.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 7 12:44:25 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 000 - 0 + 5 Reallocated_Sector_Ct POSR-- 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6334 + 12 Power_Cycle_Count -O--CK 100 100 000 - 28000 +169 Unknown_Apple_Attrib -O---K 100 100 010 - 1482111847872 +173 Wear_Leveling_Count -O---K 181 181 100 - 1361542250943 +174 Host_Reads_MiB ----CK 100 100 000 - 83489138 +175 Host_Writes_MiB ----CK 100 100 000 - 38880144 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 237 +194 Temperature_Celsius -O---K 046 046 000 - 54 (Min/Max 24/90) +197 Current_Pending_Sector -O--CK 000 000 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +244 Unknown_Attribute -O---- 000 000 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 7 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/08BE12C14779 b/SSD/Apple/SSD SM/SSD SM0128G/08BE12C14779 new file mode 100644 index 000000000..7474044d9 --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/08BE12C14779 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXZ33A0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 3 10:15:16 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2656 + 12 Power_Cycle_Count -O--CK 089 089 000 - 10159 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 777426829792 +173 Wear_Leveling_Count -O--CK 167 167 100 - 3320076108600 +174 Host_Reads_MiB -O---K 099 099 000 - 36936319 +175 Host_Writes_MiB -O---K 099 099 000 - 29918317 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 39 +194 Temperature_Celsius -O---K 064 029 000 - 36 (Min/Max 15/71) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 199 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 4 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/78B01F325AFA b/SSD/Apple/SSD SM/SSD SM0128G/78B01F325AFA new file mode 100644 index 000000000..14464e38a --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/78B01F325AFA @@ -0,0 +1,127 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW1SA0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 2 12:30:36 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 099 099 000 - 4 + 9 Power_On_Hours -O--CK 099 099 000 - 3061 + 12 Power_Cycle_Count -O--CK 075 075 000 - 24248 +169 Unknown_Apple_Attrib PO--C- 240 240 010 - 889102270944 +173 Wear_Leveling_Count -O--CK 183 183 100 - 1322884333956 +174 Host_Reads_MiB -O---K 099 099 000 - 13893904 +175 Host_Writes_MiB -O---K 099 099 000 - 11334799 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 103 +194 Temperature_Celsius -O---K 057 035 000 - 43 (Min/Max 11/65) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 199 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 4 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/9AD734F477A8 b/SSD/Apple/SSD SM/SSD SM0128G/9AD734F477A8 new file mode 100644 index 000000000..80b51d214 --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/9AD734F477A8 @@ -0,0 +1,92 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXZ33A0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 16 13:00:56 2025 -04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x001a 200 200 000 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1033 + 12 Power_Cycle_Count 0x0032 084 084 000 Old_age Always - 15601 +169 Unknown_Apple_Attrib 0x0013 253 253 010 Pre-fail Always - 700117418464 +173 Wear_Leveling_Count 0x0032 198 198 100 Old_age Always - 47249227811 +174 Host_Reads_MiB 0x0022 099 099 000 Old_age Always - 6886405 +175 Host_Writes_MiB 0x0022 099 099 000 Old_age Always - 2832945 +192 Power-Off_Retract_Count 0x0012 099 099 000 Old_age Always - 92 +194 Temperature_Celsius 0x0022 054 030 000 Old_age Always - 46 (Min/Max 10/70) +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/DC9FBBBE737F b/SSD/Apple/SSD SM/SSD SM0128G/DC9FBBBE737F new file mode 100644 index 000000000..aa4fa5135 --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/DC9FBBBE737F @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW3SA0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Dec 26 01:35:38 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2278 + 12 Power_Cycle_Count -O--CK 087 087 000 - 12703 +169 Unknown_Apple_Attrib PO--C- 222 222 010 - 1039426126304 +173 Wear_Leveling_Count -O--CK 191 191 100 - 313550700697 +174 Host_Reads_MiB -O---K 099 099 000 - 15304964 +175 Host_Writes_MiB -O---K 099 099 000 - 10729380 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 480 +194 Temperature_Celsius -O---K 068 029 000 - 32 (Min/Max 12/71) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 4 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/FA13C18C710C b/SSD/Apple/SSD SM/SSD SM0128G/FA13C18C710C new file mode 100644 index 000000000..b77e12ab5 --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/FA13C18C710C @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW1SA0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 2 15:43:31 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 12997 + 12 Power_Cycle_Count -O--CK 075 075 000 - 24601 +169 Unknown_Apple_Attrib PO--C- 190 190 010 - 1305714098656 +173 Wear_Leveling_Count -O--CK 180 180 100 - 1786747224556 +174 Host_Reads_MiB -O---K 099 099 000 - 36521669 +175 Host_Writes_MiB -O---K 099 099 000 - 29194936 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 177 +194 Temperature_Celsius -O---K 058 035 000 - 42 (Min/Max 8/65) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 199 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 4 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM/SSD SM0256G/A2684676797E b/SSD/Apple/SSD SM/SSD SM0256G/A2684676797E new file mode 100644 index 000000000..d43c86dec --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0256G/A2684676797E @@ -0,0 +1,127 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0256G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXZ33A0Q +User Capacity: 251,000,193,024 bytes [251 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 30 10:04:35 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 10249 + 12 Power_Cycle_Count -O--CK 053 053 000 - 47186 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 1533378823104 +173 Wear_Leveling_Count -O--CK 193 193 100 - 193287880838 +174 Host_Reads_MiB -O---K 099 099 000 - 19107934 +175 Host_Writes_MiB -O---K 099 099 000 - 15629248 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 221 +194 Temperature_Celsius -O---K 062 018 000 - 38 (Min/Max 17/82) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 199 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 7 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM/SSD SM0256G/C374FDBC1687 b/SSD/Apple/SSD SM/SSD SM0256G/C374FDBC1687 new file mode 100644 index 000000000..e40a27f58 --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0256G/C374FDBC1687 @@ -0,0 +1,130 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0256G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW1EA0Q +User Capacity: 251,000,193,024 bytes [251 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 31 19:20:46 2024 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 71173 + 12 Power_Cycle_Count -O--CK 093 093 000 - 6157 +169 Unknown_Apple_Attrib PO--C- 201 201 010 - 2448219440064 +173 Wear_Leveling_Count -O--CK 183 183 100 - 1370129498505 +174 Host_Reads_MiB -O---K 099 099 000 - 22429402 +175 Host_Writes_MiB -O---K 099 099 000 - 30690693 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 97 +194 Temperature_Celsius -O---K 073 020 000 - 27 (Min/Max 12/80) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 7 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + + + diff --git a/SSD/Apple/SSD SM0256/SSD SM0256F/9ECD4CAEFDB7 b/SSD/Apple/SSD SM0256/SSD SM0256F/9ECD4CAEFDB7 new file mode 100644 index 000000000..72a39d794 --- /dev/null +++ b/SSD/Apple/SSD SM0256/SSD SM0256F/9ECD4CAEFDB7 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0256F +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: UXM2JA1Q +User Capacity: 251,000,193,024 bytes [251 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 6 12:10:06 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x5f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 12357 + 12 Power_Cycle_Count -O--CK 056 056 000 - 44251 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 2122057780992 +173 Wear_Leveling_Count -O--CK 175 175 100 - 2422412608149 +174 Host_Reads_MiB -O---K 099 099 000 - 81657229 +175 Host_Writes_MiB -O---K 099 099 000 - 71081350 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 183 +194 Temperature_Celsius -O---K 067 067 000 - 33 (Min/Max 16/69) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 +240 Unknown_SSD_Attribute -O---K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x14 GPL R/O 1 Hybrid Information log +0x1c GPL - 32768 Reserved +0x20 GPL R/O 7 Streaming performance log +0x28 GPL - 32768 Reserved +0x34 GPL - 32768 Reserved +0x3c SL - 128 Reserved +0x40 GPL - 32768 Reserved +0x58 GPL - 32768 Reserved +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xaa GPL,SL VS 26 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log +0xb0 GPL,SL VS 129 Device vendor specific log +0xd9 GPL VS 127 Device vendor specific log +0xec GPL,SL - 129 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 44251 --- Lifetime Power-On Resets +0x01 0x010 4 12357 --- Power-on Hours +0x01 0x018 6 145574605149 --- Logical Sectors Written +0x01 0x020 6 953005844 --- Number of Write Commands +0x01 0x028 6 167234005983 --- Logical Sectors Read +0x01 0x030 6 1834343042 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apple/SSD SM0512/SSD SM0512F/CE50C921EB15 b/SSD/Apple/SSD SM0512/SSD SM0512F/CE50C921EB15 new file mode 100644 index 000000000..08a8f74ee --- /dev/null +++ b/SSD/Apple/SSD SM0512/SSD SM0512F/CE50C921EB15 @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0512F +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: UXM2JA1Q +User Capacity: 500,277,790,720 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 31 05:19:56 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x5f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 21309 + 12 Power_Cycle_Count -O--CK 072 072 000 - 28218 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 3221913345536 +173 Wear_Leveling_Count -O--CK 179 179 100 - 1670785401348 +174 Host_Reads_MiB -O---K 099 099 000 - 129970654 +175 Host_Writes_MiB -O---K 099 099 000 - 112019260 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 338 +194 Temperature_Celsius -O---K 061 061 000 - 39 (Min/Max 4/67) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 +240 Unknown_SSD_Attribute -O---K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 SL R/O 1 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x18 GPL R/W 1 Command Duration Limits log +0x1c GPL - 32768 Reserved +0x20 GPL R/O 7 Streaming performance log +0x28 GPL - 32768 Reserved +0x2c GPL - 1 Reserved +0x34 GPL - 32768 Reserved +0x3c SL - 128 Reserved +0x40 GPL - 1 Reserved +0x4c GPL - 32768 Reserved +0x54 GPL - 1 Reserved +0x58 GPL - 32768 Reserved +0x68 GPL - 1 Reserved +0x7c GPL - 1 Reserved +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xa4 GPL VS 1 Device vendor specific log +0xaa GPL,SL VS 26 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log +0xb0 GPL,SL VS 129 Device vendor specific log +0xb8 GPL VS 1 Device vendor specific log +0xcc GPL VS 1 Device vendor specific log +0xd9 GPL VS 127 Device vendor specific log +0xe0 GPL R/W 1 SCT Command/Status +0xec GPL,SL - 129 Reserved +0xf4 GPL - 1 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 28218 --- Lifetime Power-On Resets +0x01 0x010 4 21309 --- Power-on Hours +0x01 0x018 6 229415446467 --- Logical Sectors Written +0x01 0x020 6 1666317194 --- Number of Write Commands +0x01 0x028 6 266179900874 --- Logical Sectors Read +0x01 0x030 6 4134938146 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apple/SSD SM1024/SSD SM1024F/6B3C08A1A93D b/SSD/Apple/SSD SM1024/SSD SM1024F/6B3C08A1A93D new file mode 100644 index 000000000..7a589bd45 --- /dev/null +++ b/SSD/Apple/SSD SM1024/SSD SM1024F/6B3C08A1A93D @@ -0,0 +1,164 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM1024F +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: UXM6JA1Q +User Capacity: 1,000,555,581,440 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 1 23:28:22 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x5f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 199 199 000 - 229067 + 5 Reallocated_Sector_Ct PO--CK 099 099 000 - 1 + 9 Power_On_Hours -O--CK 094 094 000 - 27605 + 12 Power_Cycle_Count -O--CK 095 095 000 - 4402 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 7186856033280 +173 Wear_Leveling_Count -O--CK 108 108 100 - 10673175266554 +174 Host_Reads_MiB -O---K 099 099 000 - 61412428 +175 Host_Writes_MiB -O---K 099 099 000 - 40447249 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 1616 +194 Temperature_Celsius -O---K 068 068 000 - 32 (Min/Max 15/79) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 +240 Unknown_SSD_Attribute -O---K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x1c GPL - 32768 Reserved +0x20 GPL R/O 7 Streaming performance log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x28 GPL - 32768 Reserved +0x34 GPL - 32768 Reserved +0x38 GPL - 1 Reserved +0x3c SL - 128 Reserved +0x40 GPL - 32768 Reserved +0x4c GPL - 1 Reserved +0x58 GPL - 32768 Reserved +0x60 GPL - 1 Reserved +0x74 GPL - 1 Reserved +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xaa GPL,SL VS 26 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log +0xb0 GPL,SL VS 129 Device vendor specific log +0xc4 GPL VS 1 Device vendor specific log +0xd8 GPL VS 1 Device vendor specific log +0xd9 GPL VS 127 Device vendor specific log +0xec GPL,SL - 129 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4402 --- Lifetime Power-On Resets +0x01 0x010 4 27605 --- Power-on Hours +0x01 0x018 6 82835967528 --- Logical Sectors Written +0x01 0x020 6 1156919940 --- Number of Write Commands +0x01 0x028 6 125772652662 --- Logical Sectors Read +0x01 0x030 6 3840446447 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 229067 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Apple/SSD SM128/SSD SM128E/FFC198B68DAE b/SSD/Apple/SSD SM128/SSD SM128E/FFC198B68DAE new file mode 100644 index 000000000..8a7c0f634 --- /dev/null +++ b/SSD/Apple/SSD SM128/SSD SM128E/FFC198B68DAE @@ -0,0 +1,143 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM128E +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: DXM02A0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 27 18:51:10 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 099 099 000 - 39 + 9 Power_On_Hours -O--CK 083 083 000 - 81554 + 12 Power_Cycle_Count -O--CK 093 093 000 - 6769 +169 Unknown_Apple_Attrib PO--C- 152 152 010 - 167803618880 +173 Wear_Leveling_Count -O--CK 119 119 100 - 160106665 +174 Host_Reads_MiB -O--C- 099 099 000 - 101802748 +175 Host_Writes_MiB -O--C- 099 099 000 - 99662292 +192 Power-Off_Retract_Count -O--C- 001 001 000 - 4294964244 +194 Temperature_Celsius -O---K 067 043 000 - 33 (Min/Max 7/57) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 1 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xaa GPL,SL VS 2 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 75 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 75 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Apple/SSD SM256/SSD SM256C/D15A7BB7A2ED b/SSD/Apple/SSD SM256/SSD SM256C/D15A7BB7A2ED new file mode 100644 index 000000000..ffe460f0a --- /dev/null +++ b/SSD/Apple/SSD SM256/SSD SM256C/D15A7BB7A2ED @@ -0,0 +1,195 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: APPLE SSD SM256C +Serial Number: -- +LU WWN Device Id: 5 0000f0 ... +Firmware Version: AXM09A1Q +User Capacity: 251,000,193,024 bytes [251 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 1 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Apr 19 13:12:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1680) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 28) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 199 199 000 Pre-fail Always - 18 + 5 Reallocated_Sector_Ct 0x0033 098 098 000 Pre-fail Always - 74 + 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 64523 + 12 Power_Cycle_Count 0x0032 090 090 000 Old_age Always - 9999 +169 Unknown_Attribute 0x0013 253 253 010 Pre-fail Always - 8590479857920 +173 Unknown_Attribute 0x0032 059 059 100 Old_age Always FAILING_NOW 17029824450556 +175 Program_Fail_Count_Chip 0x0032 099 099 010 Old_age Always - 39 +176 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +177 Wear_Leveling_Count 0x0013 001 001 017 Pre-fail Always FAILING_NOW 3965 +178 Used_Rsvd_Blk_Cnt_Chip 0x0013 075 075 010 Pre-fail Always - 1030 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 076 076 010 Pre-fail Always - 2000 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 076 076 010 Pre-fail Always - 6320 +181 Program_Fail_Cnt_Total 0x0032 099 099 010 Old_age Always - 74 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 099 099 010 Pre-fail Always - 74 +187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 18 +192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 9870 +194 Temperature_Celsius 0x0022 053 053 000 Old_age Always - 47 (Min/Max 18/66) +195 Hardware_ECC_Recovered 0x001a 099 099 000 Old_age Always - 18 +197 Current_Pending_Sector 0x0013 100 100 000 Pre-fail Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 0 + +SMART Error Log Version: 1 +ATA Error Count: 126 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 126 occurred at disk power-on lifetime: 59597 hours (2483 days + 5 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 e0 15 48 e3 Error: UNC at LBA = 0x034815e0 = 55055840 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 20 00 01 df 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 de 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 dd 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 dc 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 db 15 48 03 00 00:01:48.000 READ SECTOR(S) + +Error 125 occurred at disk power-on lifetime: 59597 hours (2483 days + 5 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 e0 15 48 e3 Error: UNC at LBA = 0x034815e0 = 55055840 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 20 00 01 df 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 de 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 dd 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 dc 15 48 03 00 00:01:48.000 READ SECTOR(S) + 20 00 01 db 15 48 03 00 00:01:48.000 READ SECTOR(S) + +Error 124 occurred at disk power-on lifetime: 59597 hours (2483 days + 5 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 70 e0 15 48 e3 Error: + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c6 00 10 00 00 00 00 00 00:01:47.000 SET MULTIPLE MODE + ef 03 46 00 00 00 00 00 00:01:47.000 SET FEATURES [Set transfer mode] + ef 03 0c 00 00 00 00 00 00:01:47.000 SET FEATURES [Set transfer mode] + 10 00 01 01 00 00 00 00 00:01:47.000 RECALIBRATE [OBS-4] + c8 00 80 d0 15 48 03 00 00:01:46.000 READ DMA + +Error 123 occurred at disk power-on lifetime: 59597 hours (2483 days + 5 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 70 e0 15 48 e3 Error: + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c6 00 10 00 00 00 00 00 00:01:46.000 SET MULTIPLE MODE + ef 03 46 00 00 00 00 00 00:01:46.000 SET FEATURES [Set transfer mode] + ef 03 0c 00 00 00 00 00 00:01:46.000 SET FEATURES [Set transfer mode] + 10 00 01 01 00 00 00 00 00:01:46.000 RECALIBRATE [OBS-4] + c8 00 80 d0 15 48 03 00 00:01:46.000 READ DMA + +Error 122 occurred at disk power-on lifetime: 59597 hours (2483 days + 5 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 70 e0 15 48 e3 Error: + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c6 00 10 00 00 00 00 00 00:01:46.000 SET MULTIPLE MODE + ef 03 46 00 00 00 00 00 00:01:46.000 SET FEATURES [Set transfer mode] + ef 03 0c 00 00 00 00 00 00:01:46.000 SET FEATURES [Set transfer mode] + 10 00 01 01 00 00 00 00 00:01:46.000 RECALIBRATE [OBS-4] + c8 00 80 d0 15 48 03 00 00:01:45.000 READ DMA + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/Apple/SSD SM512/SSD SM512E/7989C37FF61A b/SSD/Apple/SSD SM512/SSD SM512E/7989C37FF61A new file mode 100644 index 000000000..386a8a957 --- /dev/null +++ b/SSD/Apple/SSD SM512/SSD SM512E/7989C37FF61A @@ -0,0 +1,141 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM512E +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: DXM02A0Q +User Capacity: 500,277,790,720 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 7 12:13:02 2025 HST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (53956) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 35) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 099 099 000 - 56 + 9 Power_On_Hours -O--CK 092 092 000 - 39249 + 12 Power_Cycle_Count -O--CK 099 099 000 - 418 +169 Unknown_Apple_Attrib PO--C- 153 153 010 - 241717745920 +173 Wear_Leveling_Count -O--CK 196 196 100 - 9175163 +174 Host_Reads_MiB -O--C- 099 099 000 - 2653683 +175 Host_Writes_MiB -O--C- 099 099 000 - 50477325 +192 Power-Off_Retract_Count -O--C- 099 001 000 - 113 +194 Temperature_Celsius -O---K 054 045 000 - 46 (Min/Max 14/55) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 199 199 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 1 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xaa GPL,SL VS 2 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apple/SSD TS064/SSD TS064C/686EFEAEFDCB b/SSD/Apple/SSD TS064/SSD TS064C/686EFEAEFDCB new file mode 100644 index 000000000..319b6e818 --- /dev/null +++ b/SSD/Apple/SSD TS064/SSD TS064C/686EFEAEFDCB @@ -0,0 +1,233 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron/Maxiotek based SSDs +Device Model: APPLE SSD TS064C +Serial Number: -- +Firmware Version: CJAA0201 +User Capacity: 60,666,413,056 bytes [60.6 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 21 16:37:08 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 099 099 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Unknown_JMF_Attribute POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_JMF_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_JMF_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6927 + 10 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 18452 +167 Unknown_JMF_Attribute -O---K 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Unknown_JMF_Attribute PO--C- 100 100 010 - 210487476680 +170 Bad_Block_Count PO--C- 100 100 010 - 17 252 82 +171 Unknown_Attribute ------ 100 100 000 - 45 +173 Erase_Count PO--C- 147 147 100 - 472 1607 1521 +175 Bad_Cluster_Table_Count PO--C- 100 100 010 - 0 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 739 +194 Temperature_Celsius PO---K 053 035 030 - 47 (Min/Max 15/65) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +240 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 4554 hours (189 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 02 00 00 00 06 89 5c 68 40 00 Error: ICRC, ABRT 512 sectors at LBA = 0x06895c68 = 109665384 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 02 00 00 00 06 89 5c 68 40 00 00:30:48.095 WRITE DMA EXT + 25 00 00 00 08 00 00 02 32 ef 70 40 00 00:30:48.095 READ DMA EXT + 25 00 00 00 08 00 00 01 bb 5b b8 40 00 00:30:48.095 READ DMA EXT + 25 00 00 00 18 00 00 06 91 6b 08 40 00 00:30:48.095 READ DMA EXT + 25 00 00 00 08 00 00 02 32 ef 68 40 00 00:30:48.094 READ DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 4343 hours (180 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 02 00 00 00 06 81 bc 68 40 00 Error: ICRC, ABRT 512 sectors at LBA = 0x0681bc68 = 109165672 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 02 00 00 00 06 81 bc 68 40 00 00:03:58.209 WRITE DMA EXT + 25 00 00 02 00 00 00 06 8a 56 68 40 00 00:03:58.209 READ DMA EXT + 35 00 00 02 00 00 00 06 81 ac 68 40 00 00:03:58.207 WRITE DMA EXT + 25 00 00 01 e8 00 00 06 7e 84 68 40 00 00:03:58.205 READ DMA EXT + 35 00 00 02 00 00 00 06 81 9e 68 40 00 00:03:58.204 WRITE DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 1386 hours (57 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 10 00 00 03 1b 1c e0 40 00 Error: ICRC, ABRT 16 sectors at LBA = 0x031b1ce0 = 52108512 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 00 10 00 00 03 1b 1c e0 40 00 01:14:46.665 WRITE DMA EXT + 25 00 00 00 08 00 00 05 41 4c 68 40 00 01:14:46.665 READ DMA EXT + 25 00 00 00 08 00 00 03 19 33 c0 40 00 01:14:46.665 READ DMA EXT + 25 00 00 00 08 00 00 03 1c 12 c0 40 00 01:14:46.665 READ DMA EXT + 25 00 00 00 08 00 00 04 e1 17 a0 40 00 01:14:46.665 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 45/47 Celsius +Lifetime Min/Max Temperature: 15/65 Celsius +Under/Over Temperature Limit Count: 0/8 +Vendor specific: +00 00 02 00 01 01 05 05 05 00 00 00 00 00 00 00 +00 02 02 00 c5 89 7c 01 04 00 00 00 00 00 00 03 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/40 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (100) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apple/SSD TS064/SSD TS064E/FE35EB458FDD b/SSD/Apple/SSD TS064/SSD TS064E/FE35EB458FDD new file mode 100644 index 000000000..f9961957c --- /dev/null +++ b/SSD/Apple/SSD TS064/SSD TS064E/FE35EB458FDD @@ -0,0 +1,183 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple MacBook Air SSD +Device Model: APPLE SSD TS064E +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: TQAABBF0 +User Capacity: 60,666,413,056 bytes [60.6 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 27 15:47:26 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1362 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 086 086 000 - 14903 +167 Unknown_Attribute -O--C- 100 100 000 - 0 +168 Unknown_Attribute -O--C- 200 200 000 - 1095233372160 +169 Unknown_Attribute PO--C- 100 100 010 - 180470743959 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +171 Unknown_Attribute ------ 100 100 000 - 0 +173 Wear_Leveling_Count PO--C- 172 172 100 - 2431007523463 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +177 Wear_Leveling_Count ------ 000 000 000 - 12 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 1 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 000 000 000 - 238 +194 Temperature_Celsius PO---K 058 057 000 - 42 (Min/Max 0/43) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 200 200 000 - 1095233372160 +233 Media_Wearout_Indicator ------ 000 000 000 - 37273 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Host_Writes_GiB -O--CK 000 000 000 - 18118 +242 Host_Reades_GiB -O--CK 000 000 000 - 16858 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: --/43 Celsius +Lifetime Min/Max Temperature: --/43 Celsius + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14905 --- Lifetime Power-On Resets +0x01 0x010 4 1383 --- Power-on Hours +0x01 0x018 6 38002098818 --- Logical Sectors Written +0x01 0x028 6 35356769772 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 89222 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 89222 --- Number of Hardware Resets +0x06 0x010 4 8079472 --- Number of ASR Events +0x06 0x018 4 16776960 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 24 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Azerty/M500/M500 512GB/70F4FD6C74FD b/SSD/Azerty/M500/M500 512GB/70F4FD6C74FD new file mode 100644 index 000000000..18cd4dde8 --- /dev/null +++ b/SSD/Azerty/M500/M500 512GB/70F4FD6C74FD @@ -0,0 +1,108 @@ +smartctl 7.5 2025-04-30 r5714 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: M500 Azerty 512GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW201219 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 25 13:43:20 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 6744 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 674 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 174 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 283 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 291 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 211 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 256 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 50331648 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 2048497 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 6329153 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 12 +194 Temperature_Celsius 0x0032 100 100 050 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 45977 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 0 +241 Total_LBAs_Written 0x0032 100 100 050 Old_age Always - 845410 +242 Total_LBAs_Read 0x0032 100 100 050 Old_age Always - 95482 +249 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 914955 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/BAITITON/BT58/BT58SSD08M/657054E56810 b/SSD/BAITITON/BT58/BT58SSD08M/657054E56810 new file mode 100644 index 000000000..9b47a37c3 --- /dev/null +++ b/SSD/BAITITON/BT58/BT58SSD08M/657054E56810 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BT58SSD08M +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HC1A254P +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 11:47:33 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 21777 + 12 Power_Cycle_Count -O--CK 100 100 050 - 30 +160 Unknown_Attribute -O--CK 100 100 050 - 92 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 282 +164 Unknown_Attribute -O--CK 100 100 050 - 1768 +165 Unknown_Attribute -O--CK 100 100 050 - 1521 +166 Unknown_Attribute -O--CK 100 100 050 - 978 +167 Unknown_Attribute -O--CK 100 100 050 - 1224 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 80 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 15496305 +177 Wear_Leveling_Count -O--CK 100 100 050 - 7720830 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 6 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 21 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 54083 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 543548 +242 Total_LBAs_Read -O--CK 100 100 050 - 1654 +245 Unknown_Attribute -O--CK 100 100 050 - 5198775 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 21777 --- Power-on Hours +0x01 0x018 6 35621961728 --- Logical Sectors Written +0x01 0x020 6 775772689 --- Number of Write Commands +0x01 0x028 6 108396544 --- Logical Sectors Read +0x01 0x030 6 4771967 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 78 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 260 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/BIWIN/CSE80/CSE80A1A100-256G/F7D98D1D8EA1 b/SSD/BIWIN/CSE80/CSE80A1A100-256G/F7D98D1D8EA1 new file mode 100644 index 000000000..f4792863e --- /dev/null +++ b/SSD/BIWIN/CSE80/CSE80A1A100-256G/F7D98D1D8EA1 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BIWIN CSE80A1A100-256G +Serial Number: -- +Firmware Version: W0327A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 26 20:57:03 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 122 + 12 Power_Cycle_Count -O--CK 100 100 050 - 13 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 3 +164 Unknown_Attribute -O--CK 100 100 050 - 255 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O---K 100 100 050 - 44 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1124 +242 Total_LBAs_Read ----CK 100 100 050 - 1264 +245 Unknown_Attribute -O--CK 100 100 050 - 36 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 43/43 Celsius +Lifetime Min/Max Temperature: 20/47 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 122 --- Power-on Hours +0x01 0x018 6 73691574 --- Logical Sectors Written +0x01 0x020 6 797583 --- Number of Write Commands +0x01 0x028 6 82843222 --- Logical Sectors Read +0x01 0x030 6 649114 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/BIWIN/SSD/SSD 128GB/7B450B0E87E0 b/SSD/BIWIN/SSD/SSD 128GB/7B450B0E87E0 new file mode 100644 index 000000000..2d07eda61 --- /dev/null +++ b/SSD/BIWIN/SSD/SSD 128GB/7B450B0E87E0 @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BIWIN SSD +Serial Number: -- +Firmware Version: SHY04A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Mar 3 10:00:16 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 17336 + 12 Power_Cycle_Count -O--CK 100 100 050 - 321 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 5 +164 Unknown_Attribute -O--CK 100 100 050 - 1555870 +165 Unknown_Attribute -O--CK 100 100 050 - 12509 +166 Unknown_Attribute -O--CK 100 100 050 - 26 +167 Unknown_Attribute -O--CK 100 100 050 - 1096 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 79 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 225 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1087876 +242 Total_LBAs_Read ----CK 100 100 050 - 18058 +245 Unknown_Attribute -O--CK 100 100 050 - 570970 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 321 --- Lifetime Power-On Resets +0x01 0x010 4 17336 --- Power-on Hours +0x01 0x018 6 2575587509 --- Logical Sectors Written +0x01 0x020 6 30956879 --- Number of Write Commands +0x01 0x028 6 1183503355 --- Logical Sectors Read +0x01 0x030 6 829599 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/BIWIN/SSD/SSD 32GB/C63512F95144 b/SSD/BIWIN/SSD/SSD 32GB/C63512F95144 new file mode 100644 index 000000000..39b8d61bb --- /dev/null +++ b/SSD/BIWIN/SSD/SSD 32GB/C63512F95144 @@ -0,0 +1,93 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BIWIN SSD +Serial Number: -- +Firmware Version: N1224A +User Capacity: 31,675,383,808 bytes [31.6 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Mar 15 23:08:01 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 + 12 Power_Cycle_Count ------ 100 100 050 - 1172 +160 Unknown_Attribute ------ 100 100 050 - 0 +161 Unknown_Attribute ------ 100 100 050 - 82 +162 Unknown_Attribute ------ 100 100 050 - 69 +163 Unknown_Attribute ------ 100 100 050 - 23 +164 Unknown_Attribute ------ 100 100 050 - 1155746 +165 Unknown_Attribute ------ 100 100 050 - 1152 +166 Unknown_Attribute ------ 100 100 050 - 1088 +167 Unknown_Attribute ------ 100 100 050 - 1117 +192 Power-Off_Retract_Count ------ 100 100 050 - 0 +194 Temperature_Celsius ------ 100 100 000 - 23 (Min/Max -10/58) +195 Hardware_ECC_Recovered ------ 100 100 050 - 905379 +196 Reallocated_Event_Count ------ 100 100 050 - 1605 +198 Offline_Uncorrectable ------ 000 000 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +241 Total_LBAs_Written ------ 100 100 050 - 47737 +242 Total_LBAs_Read ------ 100 100 050 - 41783 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Read SMART Self-test Log failed: Input/output error + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/BORY/M500/M500 128G/07F7F66DC7B5 b/SSD/BORY/M500/M500 128G/07F7F66DC7B5 new file mode 100644 index 000000000..0cfa7132b --- /dev/null +++ b/SSD/BORY/M500/M500 128G/07F7F66DC7B5 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BORY M500 128G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: ZD0R3G5J +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 30 16:40:20 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21161 + 12 Power_Cycle_Count -O--CK 100 100 000 - 28 +161 Unknown_Attribute -O--CK 100 100 050 - 73 +162 Unknown_Attribute -O--CK 100 100 000 - 110379 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 67 +166 Unknown_Attribute -O--CK 100 100 000 - 122 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 78 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 16 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 979689 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 81 +232 Available_Reservd_Space -O--CK 100 100 000 - 77 +241 Total_LBAs_Written -O--CK 100 100 000 - 6573 +242 Total_LBAs_Read -O--CK 100 100 000 - 60 +249 Unknown_Attribute -O--CK 100 100 000 - 1861 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 6850 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 21161 --- Power-on Hours +0x01 0x018 6 13784698447 --- Logical Sectors Written +0x01 0x020 6 194814944 --- Number of Write Commands +0x01 0x028 6 127407653 --- Logical Sectors Read +0x01 0x030 6 4457653 --- Number of Read Commands +0x01 0x038 6 76176378141 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 234 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/BR/SSD/SSD 128GB/24DCCFC790DF b/SSD/BR/SSD/SSD 128GB/24DCCFC790DF new file mode 100644 index 000000000..8135ff42a --- /dev/null +++ b/SSD/BR/SSD/SSD 128GB/24DCCFC790DF @@ -0,0 +1,162 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BR 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE1R900F +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 12 14:12:18 2025 HKT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 52 + 12 Power_Cycle_Count -O--CK 100 100 000 - 21 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 2772 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 5 +166 Unknown_Attribute -O--CK 100 100 000 - 28 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 14 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 128578 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 45 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 1 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 12 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 366 +242 Total_LBAs_Read -O--CK 100 100 000 - 72 +249 Unknown_Attribute -O--CK 100 100 000 - 418 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 383 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 52 --- Power-on Hours +0x01 0x018 6 768652047 --- Logical Sectors Written +0x01 0x020 6 22273074 --- Number of Write Commands +0x01 0x028 6 153024130 --- Logical Sectors Read +0x01 0x030 6 5125779 --- Number of Read Commands +0x01 0x038 6 180501281 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 127 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/BR/SSD/SSD 128GB/E6C9B66584E5 b/SSD/BR/SSD/SSD 128GB/E6C9B66584E5 new file mode 100644 index 000000000..e971a059c --- /dev/null +++ b/SSD/BR/SSD/SSD 128GB/E6C9B66584E5 @@ -0,0 +1,181 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BR 128GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H230919a +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 4 17:58:05 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 3138 + 12 Power_Cycle_Count ------+ 100 100 000 - 104 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 196614 +171 Unknown_Attribute ------+ 000 000 000 - 0 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 8597143647 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 65 +187 Reported_Uncorrect ------+ 100 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 76 +194 Temperature_Celsius ------+ 045 045 000 - 45 (Min/Max 45/45) +206 Unknown_SSD_Attribute ------+ 200 200 000 - 2 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 110 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 95 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +210 Unknown_Attribute ------+ 200 200 000 - 63 +211 Unknown_Attribute ------+ 200 200 000 - 49 +231 Unknown_SSD_Attribute ------+ 097 097 005 - 3 +241 Total_LBAs_Written ------+ 100 100 000 - 2404 +242 Total_LBAs_Read ------+ 100 100 000 - 8 +245 Unknown_Attribute ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: ?/45 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (265) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 104 --- Lifetime Power-On Resets +0x01 0x010 4 3138 --- Power-on Hours +0x01 0x018 6 5042305333 --- Logical Sectors Written +0x01 0x020 6 245525386 --- Number of Write Commands +0x01 0x028 6 17083347 --- Logical Sectors Read +0x01 0x030 6 262111 --- Number of Read Commands +0x01 0x038 6 2893216424816 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Biwintech/SSD SX500/SSD SX500 256GB/2BDA466FAB75 b/SSD/Biwintech/SSD SX500/SSD SX500 256GB/2BDA466FAB75 new file mode 100644 index 000000000..5949b52cd --- /dev/null +++ b/SSD/Biwintech/SSD SX500/SSD SX500 256GB/2BDA466FAB75 @@ -0,0 +1,186 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Biwintech SSD SX500 256GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN11611 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 5 02:46:11 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 6362 + 12 Power_Cycle_Count ------+ 100 100 000 - 15749 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 196614 +171 Unknown_Attribute ------+ 000 000 000 - 0 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 64468090920 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 133 +187 Reported_Uncorrect ------+ 100 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 15741 +194 Temperature_Celsius ------+ 032 032 000 - 32 (Min/Max 24/36) +206 Unknown_SSD_Attribute ------+ 200 200 000 - 15 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 665 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 40 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 2 +210 Unknown_Attribute ------+ 200 200 000 - 95 +211 Unknown_Attribute ------+ 200 200 000 - 64 +231 Unknown_SSD_Attribute ------+ 099 099 005 - 1 +241 Total_LBAs_Written ------+ 100 100 000 - 2289 +242 Total_LBAs_Read ------+ 100 100 000 - 196 +245 Unknown_Attribute ------+ 100 100 000 - 327685 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 4375 - +# 2 Extended offline Interrupted (host reset) 00% 4238 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (215) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15749 --- Lifetime Power-On Resets +0x01 0x010 4 6362 --- Power-on Hours +0x01 0x018 6 4801791910 --- Logical Sectors Written +0x01 0x020 6 149202477 --- Number of Write Commands +0x01 0x028 6 413110518 --- Logical Sectors Read +0x01 0x030 6 2497142 --- Number of Read Commands +0x01 0x038 6 5864059914360 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 44 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/CONSISTENT/SSD S6/SSD S6 256GB/6101170FAAD4 b/SSD/CONSISTENT/SSD S6/SSD S6 256GB/6101170FAAD4 new file mode 100644 index 000000000..20cbc0498 --- /dev/null +++ b/SSD/CONSISTENT/SSD S6/SSD S6 256GB/6101170FAAD4 @@ -0,0 +1,181 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CONSISTENT SSD S6 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HPS2818E +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 28 16:21:35 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2603 + 12 Power_Cycle_Count -O--CK 100 100 050 - 73 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 76 +164 Unknown_Attribute -O--CK 100 100 050 - 13 +165 Unknown_Attribute -O--CK 100 100 050 - 17 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 8 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1684 +177 Wear_Leveling_Count -O--CK 100 100 050 - 82250 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 36 +194 Temperature_Celsius -O--CK 100 100 050 - 44 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 22781 +242 Total_LBAs_Read -O--CK 100 100 050 - 3206 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 2603 --- Power-on Hours +0x01 0x018 6 1492975616 --- Logical Sectors Written +0x01 0x020 6 12844817 --- Number of Write Commands +0x01 0x028 6 210108416 --- Logical Sectors Read +0x01 0x030 6 3516071 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 152 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 251 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/CWDISK/128/128GB SSD/18A90B39D1F6 b/SSD/CWDISK/128/128GB SSD/18A90B39D1F6 new file mode 100644 index 000000000..ee8a69f4b --- /dev/null +++ b/SSD/CWDISK/128/128GB SSD/18A90B39D1F6 @@ -0,0 +1,124 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CWDISK 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.7 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 8 12:48:13 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 8775 + 12 Power_Cycle_Count PO--CK 100 100 010 - 48 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 4814 +165 Unknown_Attribute PO--CK 100 100 010 - 12 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 11 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 996 +242 Total_LBAs_Read PO--CK 100 100 010 - 15 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/CWDISK/SSD/SSD 128GB/5F0799DD63F7 b/SSD/CWDISK/SSD/SSD 128GB/5F0799DD63F7 new file mode 100644 index 000000000..103c9a9bc --- /dev/null +++ b/SSD/CWDISK/SSD/SSD 128GB/5F0799DD63F7 @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CWDISK 128GB +Serial Number: -- +Firmware Version: U1014A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 9 21:55:10 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4 + 12 Power_Cycle_Count -O--CK 100 100 050 - 25 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 6 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 19 +194 Temperature_Celsius -O---K 100 100 050 - 49 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 398 +242 Total_LBAs_Read ----CK 100 100 050 - 154 +245 Unknown_Attribute -O--CK 100 100 050 - 60 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 26097764 --- Logical Sectors Written +0x01 0x020 6 338834 --- Number of Write Commands +0x01 0x028 6 10133256 --- Logical Sectors Read +0x01 0x030 6 137370 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/CYX/SSD-S/SSD-S1000/9F4C206B831E b/SSD/CYX/SSD-S/SSD-S1000/9F4C206B831E new file mode 100644 index 000000000..97ad3740b --- /dev/null +++ b/SSD/CYX/SSD-S/SSD-S1000/9F4C206B831E @@ -0,0 +1,202 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CYX-SSD-S1000 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN12015 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 11 10:38:09 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4940 + 12 Power_Cycle_Count -O--C- 100 100 000 - 499 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 124570828975 +174 Unknown_Attribute -O---K 100 100 000 - 0 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 185 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 97 +194 Temperature_Celsius -O---K 036 036 000 - 36 (Min/Max 24/46) +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 29 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 256 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 175 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2 +210 Unknown_Attribute -O--CK 200 200 000 - 5784 +211 Unknown_Attribute -O--CK 200 200 000 - 2632 +231 Unknown_SSD_Attribute PO---K 089 089 005 - 11 +241 Total_LBAs_Written -O--CK 100 100 000 - 7432 +242 Total_LBAs_Read -O--CK 100 100 000 - 5753 +245 Unknown_Attribute -O--CK 100 100 000 - 4294639610 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3721 - +# 2 Short offline Completed without error 00% 3717 - +# 3 Short offline Completed without error 00% 2865 - +# 4 Short offline Completed without error 00% 2857 - +# 5 Short offline Completed without error 00% 2854 - +# 6 Short offline Completed without error 00% 2850 - +# 7 Short offline Completed without error 00% 2842 - +# 8 Short offline Completed without error 00% 2833 - +# 9 Short offline Completed without error 00% 2825 - +#10 Short offline Completed without error 00% 2811 - +#11 Short offline Completed without error 00% 2799 - +#12 Short offline Completed without error 00% 2786 - +#13 Short offline Completed without error 00% 2777 - +#14 Short offline Completed without error 00% 2765 - +#15 Short offline Completed without error 00% 2755 - +#16 Short offline Completed without error 00% 2746 - +#17 Extended offline Aborted by host 00% 2742 - +#18 Short offline Completed without error 00% 2738 - +#19 Short offline Completed without error 00% 2729 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: ?/38 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (441) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 499 --- Lifetime Power-On Resets +0x01 0x010 4 4940 --- Power-on Hours +0x01 0x018 6 15587289867 --- Logical Sectors Written +0x01 0x020 6 210306131 --- Number of Write Commands +0x01 0x028 6 12065147656 --- Logical Sectors Read +0x01 0x030 6 116286368 --- Number of Read Commands +0x01 0x038 6 4553269666276 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/128/128GB SSD/CDA0CAF9D12F b/SSD/China/128/128GB SSD/CDA0CAF9D12F new file mode 100644 index 000000000..1457b213d --- /dev/null +++ b/SSD/China/128/128GB SSD/CDA0CAF9D12F @@ -0,0 +1,186 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H190117H +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5671 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 23 00:00:04 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 28364 + 12 Power_Cycle_Count -O--C- 100 100 000 - 525 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 093 093 010 - 21481652245 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 150338207870 +175 Program_Fail_Count_Chip -O---K 096 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 099 099 000 - 1596 +187 Reported_Uncorrect -O--CK 099 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 387 +194 Temperature_Celsius -O---K 048 048 000 - 48 (Min/Max 48/48) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 35 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 219 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 126 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1673 +210 Unknown_Attribute -O--CK 200 200 000 - 1904 +211 Unknown_Attribute -O--CK 200 200 000 - 1713 +231 Unknown_SSD_Attribute PO---K 092 092 005 - 8 +241 Total_LBAs_Written -O--CK 100 100 000 - 5334 +242 Total_LBAs_Read -O--CK 100 100 000 - 1433 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: ?/48 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (40) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 525 --- Lifetime Power-On Resets +0x01 0x010 4 28364 --- Power-on Hours +0x01 0x018 6 11188139726 --- Logical Sectors Written +0x01 0x020 6 244628758 --- Number of Write Commands +0x01 0x028 6 3006887357 --- Logical Sectors Read +0x01 0x030 6 61070883 --- Number of Read Commands +0x01 0x038 6 26138183582152 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 29 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/256/256GB SSD/2A3E7CCDB668 b/SSD/China/256/256GB SSD/2A3E7CCDB668 new file mode 100644 index 000000000..c73f48196 --- /dev/null +++ b/SSD/China/256/256GB SSD/2A3E7CCDB668 @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 256GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: V1.5.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 29 14:55:44 2025 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 30 + 12 Power_Cycle_Count -O--C- 100 100 000 - 26 +164 Unknown_Attribute ------ 100 100 000 - 25770524679 +165 Unknown_Attribute ------ 100 100 000 - 11 +166 Unknown_Attribute ------ 100 100 000 - 6 +167 Unknown_Attribute -O---K 100 100 000 - 7 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 27/34) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 93 +242 Total_LBAs_Read -O--CK 100 100 000 - 35 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/32 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (146) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 30 --- Power-on Hours +0x01 0x018 6 195702414 --- Logical Sectors Written +0x01 0x020 6 5311463 --- Number of Write Commands +0x01 0x028 6 75194077 --- Logical Sectors Read +0x01 0x030 6 3377838 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/256/256GB SSD/61E9E7DD1FB0 b/SSD/China/256/256GB SSD/61E9E7DD1FB0 new file mode 100644 index 000000000..10f85f630 --- /dev/null +++ b/SSD/China/256/256GB SSD/61E9E7DD1FB0 @@ -0,0 +1,169 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 256GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: V1.5.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 29 14:55:44 2025 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 30 + 12 Power_Cycle_Count -O--C- 100 100 000 - 26 +164 Unknown_Attribute ------ 100 100 000 - 21475491847 +165 Unknown_Attribute ------ 100 100 000 - 10 +166 Unknown_Attribute ------ 100 100 000 - 5 +167 Unknown_Attribute -O---K 100 100 000 - 7 +194 Temperature_Celsius -O---K 029 029 000 - 29 (Min/Max 27/33) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 49 +242 Total_LBAs_Read -O--CK 100 100 000 - 13 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: ?/31 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (218) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 30 --- Power-on Hours +0x01 0x018 6 103829725 --- Logical Sectors Written +0x01 0x020 6 3516386 --- Number of Write Commands +0x01 0x028 6 28764830 --- Logical Sectors Read +0x01 0x030 6 2612594 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/512/512GB SSD/0264C558B6ED b/SSD/China/512/512GB SSD/0264C558B6ED new file mode 100644 index 000000000..76e41b55f --- /dev/null +++ b/SSD/China/512/512GB SSD/0264C558B6ED @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN16525 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 26 10:43:04 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7338 + 12 Power_Cycle_Count -O--C- 100 100 000 - 18 +164 Unknown_Attribute ------ 100 100 000 - 25772032016 +165 Unknown_Attribute ------ 100 100 000 - 34 +166 Unknown_Attribute ------ 100 100 000 - 6 +167 Unknown_Attribute -O---K 100 100 000 - 16 +194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 25/36) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1711 +242 Total_LBAs_Read -O--CK 100 100 000 - 349 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (259) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 7338 --- Power-on Hours +0x01 0x018 6 3588992882 --- Logical Sectors Written +0x01 0x020 6 56332770 --- Number of Write Commands +0x01 0x028 6 733943203 --- Logical Sectors Read +0x01 0x030 6 4633456 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/1E048E8EA82E b/SSD/China/512/512GB SSD/1E048E8EA82E new file mode 100644 index 000000000..e1cacd8b3 --- /dev/null +++ b/SSD/China/512/512GB SSD/1E048E8EA82E @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN20049 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 25 22:12:47 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 71 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +164 Unknown_Attribute ------ 100 100 000 - 65536 +165 Unknown_Attribute ------ 100 100 000 - 1 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 25/39) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 51 +242 Total_LBAs_Read -O--CK 100 100 000 - 23 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: ?/31 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (84) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 71 --- Power-on Hours +0x01 0x018 6 108610129 --- Logical Sectors Written +0x01 0x020 6 744246 --- Number of Write Commands +0x01 0x028 6 49075813 --- Logical Sectors Read +0x01 0x030 6 903146 --- Number of Read Commands +0x01 0x038 6 64682691040 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/439264630669 b/SSD/China/512/512GB SSD/439264630669 new file mode 100644 index 000000000..a7b950ffc --- /dev/null +++ b/SSD/China/512/512GB SSD/439264630669 @@ -0,0 +1,176 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 24 17:34:15 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4188 + 12 Power_Cycle_Count -O--C- 100 100 000 - 13 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 35 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 1627836121672 +165 Unknown_Attribute ------ 100 100 000 - 664 +166 Unknown_Attribute ------ 100 100 000 - 379 +167 Unknown_Attribute -O---K 100 100 000 - 584 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 081 081 010 - 81 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius -O---K 040 040 000 - 40 (Min/Max 13/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1032712 +242 Total_LBAs_Read -O--CK 100 100 000 - 21614 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (21) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 4188 --- Power-on Hours +0x01 0x018 6 67679844911 --- Logical Sectors Written +0x01 0x020 6 604906163 --- Number of Write Commands +0x01 0x028 6 1416523876 --- Logical Sectors Read +0x01 0x030 6 11676001 --- Number of Read Commands +0x01 0x038 6 3859073411720 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 44 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/550A9A0E8078 b/SSD/China/512/512GB SSD/550A9A0E8078 new file mode 100644 index 000000000..724f3a2d4 --- /dev/null +++ b/SSD/China/512/512GB SSD/550A9A0E8078 @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN20049 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 13:39:10 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 156 + 12 Power_Cycle_Count -O--C- 100 100 000 - 23 +164 Unknown_Attribute ------ 100 100 000 - 196609 +165 Unknown_Attribute ------ 100 100 000 - 3 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 1 +194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 24/37) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 65 +242 Total_LBAs_Read -O--CK 100 100 000 - 25 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/33 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (8) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 156 --- Power-on Hours +0x01 0x018 6 137525383 --- Logical Sectors Written +0x01 0x020 6 2149266 --- Number of Write Commands +0x01 0x028 6 53073427 --- Logical Sectors Read +0x01 0x030 6 852667 --- Number of Read Commands +0x01 0x038 6 142293038468 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/84207AFBF331 b/SSD/China/512/512GB SSD/84207AFBF331 new file mode 100644 index 000000000..dcfc5b559 --- /dev/null +++ b/SSD/China/512/512GB SSD/84207AFBF331 @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 1 12:50:38 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 934 + 12 Power_Cycle_Count -O--C- 100 100 000 - 19 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 29 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 8599175245 +165 Unknown_Attribute ------ 100 100 000 - 141 +166 Unknown_Attribute ------ 100 100 000 - 2 +167 Unknown_Attribute -O---K 100 100 000 - 77 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 098 098 010 - 98 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 11 +194 Temperature_Celsius -O---K 015 015 000 - 15 (Min/Max 11/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 267718 +242 Total_LBAs_Read -O--CK 100 100 000 - 17648 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (25) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 934 --- Power-on Hours +0x01 0x018 6 17545216259 --- Logical Sectors Written +0x01 0x020 6 134229831 --- Number of Write Commands +0x01 0x028 6 1156600779 --- Logical Sectors Read +0x01 0x030 6 6794398 --- Number of Read Commands +0x01 0x038 6 862356371900 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/88182D1B25DB b/SSD/China/512/512GB SSD/88182D1B25DB new file mode 100644 index 000000000..75e8cf1c9 --- /dev/null +++ b/SSD/China/512/512GB SSD/88182D1B25DB @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 24 14:02:53 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 829 + 12 Power_Cycle_Count -O--C- 100 100 000 - 13 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 35 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 8591048711 +165 Unknown_Attribute ------ 100 100 000 - 17 +166 Unknown_Attribute ------ 100 100 000 - 2 +167 Unknown_Attribute -O---K 100 100 000 - 7 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 5 +194 Temperature_Celsius -O---K 029 029 000 - 29 (Min/Max 13/36) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 32186 +242 Total_LBAs_Read -O--CK 100 100 000 - 865 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (20) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 829 --- Power-on Hours +0x01 0x018 6 2109382257 --- Logical Sectors Written +0x01 0x020 6 19955397 --- Number of Write Commands +0x01 0x028 6 56735137 --- Logical Sectors Read +0x01 0x030 6 2114312 --- Number of Read Commands +0x01 0x038 6 767490689988 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/97F248A7C705 b/SSD/China/512/512GB SSD/97F248A7C705 new file mode 100644 index 000000000..8d672e0e1 --- /dev/null +++ b/SSD/China/512/512GB SSD/97F248A7C705 @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 24 14:52:11 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 58 + 12 Power_Cycle_Count -O--C- 100 100 000 - 21 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 451 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 8590327812 +165 Unknown_Attribute ------ 100 100 000 - 6 +166 Unknown_Attribute ------ 100 100 000 - 2 +167 Unknown_Attribute -O---K 100 100 000 - 4 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 8 +194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 17/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 32816 +242 Total_LBAs_Read -O--CK 100 100 000 - 30082 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (27) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 58 --- Power-on Hours +0x01 0x018 6 2150632262 --- Logical Sectors Written +0x01 0x020 6 10301234 --- Number of Write Commands +0x01 0x028 6 1971475425 --- Logical Sectors Read +0x01 0x030 6 9364625 --- Number of Read Commands +0x01 0x038 6 51749562752 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/A618E9FA566C b/SSD/China/512/512GB SSD/A618E9FA566C new file mode 100644 index 000000000..a5ac9df2c --- /dev/null +++ b/SSD/China/512/512GB SSD/A618E9FA566C @@ -0,0 +1,168 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN16525 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 7 12:48:20 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 361 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +164 Unknown_Attribute ------ 100 100 000 - 17180262405 +165 Unknown_Attribute ------ 100 100 000 - 6 +166 Unknown_Attribute ------ 100 100 000 - 4 +167 Unknown_Attribute -O---K 100 100 000 - 5 +194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 25/36) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 451 +242 Total_LBAs_Read -O--CK 100 100 000 - 393 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: ?/32 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (289) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 361 --- Power-on Hours +0x01 0x018 6 947380057 --- Logical Sectors Written +0x01 0x020 6 8925023 --- Number of Write Commands +0x01 0x028 6 824205748 --- Logical Sectors Read +0x01 0x030 6 5786947 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/D832F550A46E b/SSD/China/512/512GB SSD/D832F550A46E new file mode 100644 index 000000000..9c5172a1b --- /dev/null +++ b/SSD/China/512/512GB SSD/D832F550A46E @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jan 4 08:11:14 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 10 + 12 Power_Cycle_Count -O--C- 100 100 000 - 32 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 448 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 4295163906 +165 Unknown_Attribute ------ 100 100 000 - 3 +166 Unknown_Attribute ------ 100 100 000 - 1 +167 Unknown_Attribute -O---K 100 100 000 - 2 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 13/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 17206 +242 Total_LBAs_Read -O--CK 100 100 000 - 16420 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (56) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 10 --- Power-on Hours +0x01 0x018 6 1127649433 --- Logical Sectors Written +0x01 0x020 6 5216067 --- Number of Write Commands +0x01 0x028 6 1076127875 --- Logical Sectors Read +0x01 0x030 6 5398411 --- Number of Read Commands +0x01 0x038 6 8625523292 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/DD1B8E5601D9 b/SSD/China/512/512GB SSD/DD1B8E5601D9 new file mode 100644 index 000000000..de2d0d2cf --- /dev/null +++ b/SSD/China/512/512GB SSD/DD1B8E5601D9 @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN11986 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 17 15:07:06 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 010 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 51 + 12 Power_Cycle_Count ------+ 100 100 000 - 66 +164 Unknown_Attribute ------ 100 100 000 - 12885491717 +165 Unknown_Attribute ------ 100 100 000 - 9 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute ------+ 100 100 000 - 5 +194 Temperature_Celsius ------+ 033 033 000 - 33 (Min/Max 24/40) +199 UDMA_CRC_Error_Count ------+ 100 100 000 - 0 +241 Total_LBAs_Written ------+ 100 100 000 - 574 +242 Total_LBAs_Read ------+ 100 100 000 - 515 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (93) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 66 --- Lifetime Power-On Resets +0x01 0x010 4 51 --- Power-on Hours +0x01 0x018 6 1204733249 --- Logical Sectors Written +0x01 0x020 6 15599410 --- Number of Write Commands +0x01 0x028 6 1080634881 --- Logical Sectors Read +0x01 0x030 6 12686709 --- Number of Read Commands +0x01 0x038 6 43133330960 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/E2C76950BE79 b/SSD/China/512/512GB SSD/E2C76950BE79 new file mode 100644 index 000000000..5fedbfe55 --- /dev/null +++ b/SSD/China/512/512GB SSD/E2C76950BE79 @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 1 00:19:32 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 36 + 12 Power_Cycle_Count -O--C- 100 100 000 - 46 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 454 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 8590196740 +165 Unknown_Attribute ------ 100 100 000 - 4 +166 Unknown_Attribute ------ 100 100 000 - 2 +167 Unknown_Attribute -O---K 100 100 000 - 4 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 13 +194 Temperature_Celsius -O---K 034 034 000 - 34 (Min/Max 13/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 32472 +242 Total_LBAs_Read -O--CK 100 100 000 - 30947 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (51) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 36 --- Power-on Hours +0x01 0x018 6 2128130713 --- Logical Sectors Written +0x01 0x020 6 9262128 --- Number of Write Commands +0x01 0x028 6 2028143555 --- Logical Sectors Read +0x01 0x030 6 9947129 --- Number of Read Commands +0x01 0x038 6 30192513572 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/512/512GB SSD/FE705B088824 b/SSD/China/512/512GB SSD/FE705B088824 new file mode 100644 index 000000000..f3dbda621 --- /dev/null +++ b/SSD/China/512/512GB SSD/FE705B088824 @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN20049 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 1 18:31:36 2026 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 398 + 12 Power_Cycle_Count -O--C- 100 100 000 - 37 +164 Unknown_Attribute ------ 100 100 000 - 131072 +165 Unknown_Attribute ------ 100 100 000 - 2 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 25/37) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 73 +242 Total_LBAs_Read -O--CK 100 100 000 - 25 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: ?/32 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (441) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 398 --- Power-on Hours +0x01 0x018 6 154895460 --- Logical Sectors Written +0x01 0x020 6 1816213 --- Number of Write Commands +0x01 0x028 6 52608559 --- Logical Sectors Read +0x01 0x030 6 1098832 --- Number of Read Commands +0x01 0x038 6 366503569060 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/BK/BK-128GB MSATA SSD/71E17823C4C1 b/SSD/China/BK/BK-128GB MSATA SSD/71E17823C4C1 new file mode 100644 index 000000000..dbf8f50df --- /dev/null +++ b/SSD/China/BK/BK-128GB MSATA SSD/71E17823C4C1 @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BK-128GB MSATA SSD +Serial Number: -- +Firmware Version: S1022B0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 20 13:50:42 2025 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4189 + 12 Power_Cycle_Count -O--CK 100 100 050 - 200 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 5 +164 Unknown_Attribute -O--CK 100 100 050 - 67714 +165 Unknown_Attribute -O--CK 100 100 050 - 176 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 24 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 59 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 35487 +242 Total_LBAs_Read ----CK 100 100 050 - 966 +245 Unknown_Attribute -O--CK 100 100 050 - 9978 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 200 --- Lifetime Power-On Resets +0x01 0x010 4 4189 --- Power-on Hours +0x01 0x018 6 2325698900 --- Logical Sectors Written +0x01 0x020 6 2576154 --- Number of Write Commands +0x01 0x028 6 63358423 --- Logical Sectors Read +0x01 0x030 6 106082 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/BK/BK-32GB MSATA SSD/1FE8FDC82C7F b/SSD/China/BK/BK-32GB MSATA SSD/1FE8FDC82C7F new file mode 100644 index 000000000..57387aac4 --- /dev/null +++ b/SSD/China/BK/BK-32GB MSATA SSD/1FE8FDC82C7F @@ -0,0 +1,173 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BK-32GB MSATA SSD +Serial Number: -- +Firmware Version: V0321A0 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 22:30:33 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 20779 + 12 Power_Cycle_Count -O--CK 100 100 050 - 152 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 950300 +165 Unknown_Attribute -O--CK 100 100 050 - 12065 +166 Unknown_Attribute -O--CK 100 100 050 - 406 +167 Unknown_Attribute -O--CK 100 100 050 - 1081 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 85 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 137 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 11648 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 263733 +242 Total_LBAs_Read ----CK 100 100 050 - 36838 +245 Unknown_Attribute -O--CK 100 100 050 - 284174 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 26/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 152 --- Lifetime Power-On Resets +0x01 0x010 4 20779 --- Power-on Hours +0x01 0x018 6 104143388 --- Logical Sectors Written +0x01 0x020 6 14409980 --- Number of Write Commands +0x01 0x028 6 2414231070 --- Logical Sectors Read +0x01 0x030 6 6135189 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 59 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/C/C500/FC362D3C8982 b/SSD/China/C/C500/FC362D3C8982 new file mode 100644 index 000000000..aa0ce0783 --- /dev/null +++ b/SSD/China/C/C500/FC362D3C8982 @@ -0,0 +1,146 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: C500 +Serial Number: -- +Firmware Version: U1014A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 20 18:37:43 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 11180 + 12 Power_Cycle_Count -O--CK 100 100 050 - 441 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 31234 +165 Unknown_Attribute -O--CK 100 100 050 - 305 +166 Unknown_Attribute -O--CK 100 100 050 - 135 +167 Unknown_Attribute -O--CK 100 100 050 - 160 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 97 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 424 +194 Temperature_Celsius -O---K 100 100 050 - 49 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 345771 +242 Total_LBAs_Read ----CK 100 100 050 - 1177 +245 Unknown_Attribute -O--CK 100 100 050 - 1954165 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 441 --- Lifetime Power-On Resets +0x01 0x010 4 11180 --- Power-on Hours +0x01 0x018 6 1185621129 --- Logical Sectors Written +0x01 0x020 6 581018197 --- Number of Write Commands +0x01 0x028 6 77183256 --- Logical Sectors Read +0x01 0x030 6 3201031 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/FPT310/FPT310M4SSD128G/697C36C503D6 b/SSD/China/FPT310/FPT310M4SSD128G/697C36C503D6 new file mode 100644 index 000000000..a46c4472e --- /dev/null +++ b/SSD/China/FPT310/FPT310M4SSD128G/697C36C503D6 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FPT310M4SSD128G +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jan 11 18:41:23 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 11979 + 12 Power_Cycle_Count -O--C- 100 100 000 - 510 +161 Unknown_Attribute -O--C- 100 100 000 - 215 +163 Unknown_Attribute PO---- 100 100 050 - 6 +165 Unknown_Attribute ------ 100 100 000 - 253 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 243 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 381 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 8056 +242 Total_LBAs_Read -O--C- 100 100 000 - 3431 +249 Unknown_Attribute -O--C- 100 100 000 - 17409 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 510 --- Lifetime Power-On Resets +0x01 0x010 4 11979 --- Power-on Hours +0x01 0x018 6 16896534609 --- Logical Sectors Written +0x01 0x028 6 7197354500 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 856 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/FPT310/FPT310M4SSD256G/5F3DA4A08015 b/SSD/China/FPT310/FPT310M4SSD256G/5F3DA4A08015 new file mode 100644 index 000000000..1c9c4fd87 --- /dev/null +++ b/SSD/China/FPT310/FPT310M4SSD256G/5F3DA4A08015 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FPT310M4SSD256G +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 29 18:52:00 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 12671 + 12 Power_Cycle_Count -O--C- 100 100 000 - 260 +161 Unknown_Attribute -O--C- 100 100 000 - 266 +163 Unknown_Attribute PO---- 100 100 050 - 9 +165 Unknown_Attribute ------ 100 100 000 - 285 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 275 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 93 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 21675 +242 Total_LBAs_Read -O--C- 100 100 000 - 1061 +249 Unknown_Attribute -O--C- 100 100 000 - 28396 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 260 --- Lifetime Power-On Resets +0x01 0x010 4 12671 --- Power-on Hours +0x01 0x018 6 45457651533 --- Logical Sectors Written +0x01 0x028 6 2227088587 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 699 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/FPT310/FPT310M4SSD256G/906E45C9E6E4 b/SSD/China/FPT310/FPT310M4SSD256G/906E45C9E6E4 new file mode 100644 index 000000000..fb38d31eb --- /dev/null +++ b/SSD/China/FPT310/FPT310M4SSD256G/906E45C9E6E4 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FPT310M4SSD256G +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Dec 19 04:56:41 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13011 + 12 Power_Cycle_Count -O--C- 100 100 000 - 64 +161 Unknown_Attribute -O--C- 100 100 000 - 249 +163 Unknown_Attribute PO---- 100 100 050 - 34 +165 Unknown_Attribute ------ 100 100 000 - 177 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 148 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 31 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 934 +242 Total_LBAs_Read -O--C- 100 100 000 - 80 +249 Unknown_Attribute -O--C- 100 100 000 - 33971 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x010 4 13011 --- Power-on Hours +0x01 0x018 6 1959952994 --- Logical Sectors Written +0x01 0x028 6 167899379 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 301 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 47 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 48 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/FPT310/FPT310M4SSD256G/95BB3EC93652 b/SSD/China/FPT310/FPT310M4SSD256G/95BB3EC93652 new file mode 100644 index 000000000..a06dacba3 --- /dev/null +++ b/SSD/China/FPT310/FPT310M4SSD256G/95BB3EC93652 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FPT310M4SSD256G +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 21 20:36:26 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1151 + 12 Power_Cycle_Count -O--C- 100 100 000 - 119 +161 Unknown_Attribute -O--C- 100 100 000 - 265 +163 Unknown_Attribute PO---- 100 100 050 - 19 +165 Unknown_Attribute ------ 100 100 000 - 155 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 108 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 4789 +242 Total_LBAs_Read -O--C- 100 100 000 - 1466 +249 Unknown_Attribute -O--C- 100 100 000 - 23479 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 119 --- Lifetime Power-On Resets +0x01 0x010 4 1151 --- Power-on Hours +0x01 0x018 6 10044520211 --- Logical Sectors Written +0x01 0x028 6 3074510806 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 651 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/FPT310/FPT310M4SSD256G/AB7529BFB60F b/SSD/China/FPT310/FPT310M4SSD256G/AB7529BFB60F new file mode 100644 index 000000000..22c357ce2 --- /dev/null +++ b/SSD/China/FPT310/FPT310M4SSD256G/AB7529BFB60F @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FPT310M4SSD256G +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 9 10:21:04 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 119 + 12 Power_Cycle_Count -O--C- 100 100 000 - 24 +161 Unknown_Attribute -O--C- 100 100 000 - 267 +163 Unknown_Attribute PO---- 100 100 050 - 10 +165 Unknown_Attribute ------ 100 100 000 - 3 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 2 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 204 +242 Total_LBAs_Read -O--C- 100 100 000 - 50 +249 Unknown_Attribute -O--C- 100 100 000 - 276 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 119 --- Power-on Hours +0x01 0x018 6 429650357 --- Logical Sectors Written +0x01 0x028 6 105837728 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 105 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/FPT310/FPT310M4SSD256G/D7DC0CC3F54D b/SSD/China/FPT310/FPT310M4SSD256G/D7DC0CC3F54D new file mode 100644 index 000000000..52ddb13ae --- /dev/null +++ b/SSD/China/FPT310/FPT310M4SSD256G/D7DC0CC3F54D @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FPT310M4SSD256G +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 12 10:23:34 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16205 + 12 Power_Cycle_Count -O--C- 100 100 000 - 45 +161 Unknown_Attribute -O--C- 100 100 000 - 269 +163 Unknown_Attribute PO---- 100 100 050 - 7 +165 Unknown_Attribute ------ 100 100 000 - 601 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 577 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 25 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 80401 +242 Total_LBAs_Read -O--C- 100 100 000 - 1211 +249 Unknown_Attribute -O--C- 100 100 000 - 96427 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1474 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x010 4 16205 --- Power-on Hours +0x01 0x018 6 168614228031 --- Logical Sectors Written +0x01 0x028 6 2541652887 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 306 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 57 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/G521/G521N 256G/1FEABDD6AD50 b/SSD/China/G521/G521N 256G/1FEABDD6AD50 new file mode 100644 index 000000000..5b9de6f57 --- /dev/null +++ b/SSD/China/G521/G521N 256G/1FEABDD6AD50 @@ -0,0 +1,208 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 21 23:53:41 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 291 + 12 Power_Cycle_Count -O--CK 100 100 050 - 19 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 22884 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1545233 +177 Wear_Leveling_Count -O--CK 100 100 050 - 8464822 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 2178 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 54111 +242 Total_LBAs_Read -O--CK 100 100 050 - 989 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3546218496 --- Logical Sectors Written +0x01 0x020 6 28202796 --- Number of Write Commands +0x01 0x028 6 64815104 --- Logical Sectors Read +0x01 0x030 6 1294739 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/50FEE949AD3D b/SSD/China/G521/G521N 256G/50FEE949AD3D new file mode 100644 index 000000000..e8050063b --- /dev/null +++ b/SSD/China/G521/G521N 256G/50FEE949AD3D @@ -0,0 +1,283 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 4 12:41:44 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1967 + 12 Power_Cycle_Count -O--CK 100 100 050 - 74 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 9060 +163 Unknown_Attribute -O--CK 100 100 050 - 82 +164 Unknown_Attribute -O--CK 100 100 050 - 56 +165 Unknown_Attribute -O--CK 100 100 050 - 160 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 63 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 16777216 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 267984 +177 Wear_Leveling_Count -O--CK 100 100 050 - 467556 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 55 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 49927 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 87390 +242 Total_LBAs_Read -O--CK 100 100 050 - 46736 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 7 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 7 [2] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 00 00 1d 08 00 b6 f8 00 00 at LBA = 0x1d0800b6f8 = 124688316152 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 00 00 1d 08 00 b6 f8 40 80 00:00:00.690 WRITE FPDMA QUEUED + 60 00 08 00 00 00 00 6c 00 61 80 40 80 00:00:00.690 READ FPDMA QUEUED + 60 00 08 00 00 00 1d 09 00 b6 00 40 80 00:00:00.690 READ FPDMA QUEUED + 60 00 08 00 00 00 00 6d 00 61 00 40 80 00:00:00.690 READ FPDMA QUEUED + 60 00 08 00 00 00 1d 08 00 b6 f8 40 80 00:00:00.690 READ FPDMA QUEUED + +Error 6 [1] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 00 00 00 ea 00 62 60 00 00 at LBA = 0xea006260 = 3925893728 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 00 00 00 ea 00 62 60 40 80 00:00:36.620 WRITE FPDMA QUEUED + 60 00 08 00 00 00 00 ea 00 62 78 40 80 00:00:36.620 READ FPDMA QUEUED + 60 00 08 00 00 00 00 ea 00 62 70 40 80 00:00:36.620 READ FPDMA QUEUED + 60 00 08 00 00 00 00 ea 00 62 68 40 80 00:00:36.620 READ FPDMA QUEUED + 60 00 08 00 00 00 00 ea 00 62 60 40 80 00:00:36.620 READ FPDMA QUEUED + +Error 5 [0] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 00 00 01 00 00 00 00 00 00 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:26.770 IDENTIFY DEVICE + 50 00 01 00 01 00 00 00 00 00 01 00 ff 00:00:26.760 FORMAT TRACK [OBS-4] + +Error 4 [3] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 00 00 01 00 00 00 00 00 00 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:21.630 IDENTIFY DEVICE + 50 00 01 00 01 00 00 00 00 00 01 00 ff 00:00:21.630 FORMAT TRACK [OBS-4] + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 1967 --- Power-on Hours +0x01 0x018 6 5727191040 --- Logical Sectors Written +0x01 0x020 6 108450667 --- Number of Write Commands +0x01 0x028 6 3062890496 --- Logical Sectors Read +0x01 0x030 6 29780097 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 54 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 121 Device-to-host register FISes sent due to a COMRESET +0x000b 2 7 CRC errors within host-to-device FIS +0x000d 2 7 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/53ACBD9B964B b/SSD/China/G521/G521N 256G/53ACBD9B964B new file mode 100644 index 000000000..d914da44a --- /dev/null +++ b/SSD/China/G521/G521N 256G/53ACBD9B964B @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 6 00:11:50 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 311 + 12 Power_Cycle_Count -O--CK 100 100 050 - 29 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 23652 +164 Unknown_Attribute -O--CK 100 100 050 - 2 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 604531 +177 Wear_Leveling_Count -O--CK 100 100 050 - 2329001 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 55701 +242 Total_LBAs_Read -O--CK 100 100 050 - 3673 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 311 --- Power-on Hours +0x01 0x018 6 3650420736 --- Logical Sectors Written +0x01 0x020 6 32933824 --- Number of Write Commands +0x01 0x028 6 240713728 --- Logical Sectors Read +0x01 0x030 6 4227074 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 44 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 108 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/599AC4D6D5A7 b/SSD/China/G521/G521N 256G/599AC4D6D5A7 new file mode 100644 index 000000000..0808189a9 --- /dev/null +++ b/SSD/China/G521/G521N 256G/599AC4D6D5A7 @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 16:50:36 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 585 + 12 Power_Cycle_Count -O--CK 100 100 050 - 32 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 25444 +164 Unknown_Attribute -O--CK 100 100 050 - 686 +165 Unknown_Attribute -O--CK 100 100 050 - 586 +166 Unknown_Attribute -O--CK 100 100 050 - 43 +167 Unknown_Attribute -O--CK 100 100 050 - 360 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 16777216 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 4112324 +177 Wear_Leveling_Count -O--CK 100 100 050 - 12894228 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 11 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 225388 +242 Total_LBAs_Read -O--CK 100 100 050 - 11591 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 585 --- Power-on Hours +0x01 0x018 6 14771027968 --- Logical Sectors Written +0x01 0x020 6 119546181 --- Number of Write Commands +0x01 0x028 6 759627776 --- Logical Sectors Read +0x01 0x030 6 10766230 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 93 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/8BBB35BEE32D b/SSD/China/G521/G521N 256G/8BBB35BEE32D new file mode 100644 index 000000000..de54b2fe5 --- /dev/null +++ b/SSD/China/G521/G521N 256G/8BBB35BEE32D @@ -0,0 +1,220 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 16 08:50:42 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 13 + 12 Power_Cycle_Count -O--CK 100 100 050 - 33 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 2660 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 16 +194 Temperature_Celsius -O--CK 100 100 050 - 53 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 1270 +242 Total_LBAs_Read -O--CK 100 100 050 - 948 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 13 - +# 2 Offline Self-test routine in progress 10% 13 - +# 3 Offline Self-test routine in progress 10% 13 - +# 4 Offline Self-test routine in progress 10% 13 - +# 5 Offline Self-test routine in progress 10% 13 - +# 6 Offline Self-test routine in progress 10% 13 - +# 7 Offline Self-test routine in progress 10% 13 - +# 8 Offline Self-test routine in progress 10% 13 - +# 9 Offline Self-test routine in progress 10% 13 - +#10 Offline Self-test routine in progress 10% 13 - +#11 Offline Self-test routine in progress 10% 13 - +#12 Offline Self-test routine in progress 10% 13 - +#13 Offline Self-test routine in progress 10% 13 - +#14 Offline Self-test routine in progress 10% 13 - +#15 Offline Self-test routine in progress 10% 13 - +#16 Offline Self-test routine in progress 10% 13 - +#17 Offline Self-test routine in progress 10% 13 - +#18 Offline Self-test routine in progress 10% 13 - +#19 Offline Self-test routine in progress 10% 13 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 13 --- Power-on Hours +0x01 0x018 6 83230720 --- Logical Sectors Written +0x01 0x020 6 958713 --- Number of Write Commands +0x01 0x028 6 62128128 --- Logical Sectors Read +0x01 0x030 6 1022984 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 25 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 106 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/B56BB8012118 b/SSD/China/G521/G521N 256G/B56BB8012118 new file mode 100644 index 000000000..508db3c2f --- /dev/null +++ b/SSD/China/G521/G521N 256G/B56BB8012118 @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 1 21:16:52 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 991 + 12 Power_Cycle_Count -O--CK 100 100 050 - 17 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 3428 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 318767104 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 9625 +177 Wear_Leveling_Count -O--CK 100 100 050 - 16799353 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 3 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 22653 +242 Total_LBAs_Read -O--CK 100 100 050 - 1771 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 991 --- Power-on Hours +0x01 0x018 6 1484587008 --- Logical Sectors Written +0x01 0x020 6 21834095 --- Number of Write Commands +0x01 0x028 6 116064256 --- Logical Sectors Read +0x01 0x030 6 1838607 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 81 Device-to-host register FISes sent due to a COMRESET +0x000b 2 3 CRC errors within host-to-device FIS +0x000d 2 3 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/B6066E4380E8 b/SSD/China/G521/G521N 256G/B6066E4380E8 new file mode 100644 index 000000000..5f28d392a --- /dev/null +++ b/SSD/China/G521/G521N 256G/B6066E4380E8 @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 19:34:58 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 104 + 12 Power_Cycle_Count -O--CK 100 100 050 - 43 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 4196 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 22 +194 Temperature_Celsius -O--CK 100 100 050 - 52 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 2047 +242 Total_LBAs_Read -O--CK 100 100 050 - 1175 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 134152192 --- Logical Sectors Written +0x01 0x020 6 1406310 --- Number of Write Commands +0x01 0x028 6 77004800 --- Logical Sectors Read +0x01 0x030 6 1416723 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 31 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 112 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/D468F1042B8F b/SSD/China/G521/G521N 256G/D468F1042B8F new file mode 100644 index 000000000..c07b3df8b --- /dev/null +++ b/SSD/China/G521/G521N 256G/D468F1042B8F @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 17 09:25:11 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3 + 12 Power_Cycle_Count -O--CK 100 100 050 - 20 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 2916 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 1287 +242 Total_LBAs_Read -O--CK 100 100 050 - 923 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 84344832 --- Logical Sectors Written +0x01 0x020 6 1031241 --- Number of Write Commands +0x01 0x028 6 60489728 --- Logical Sectors Read +0x01 0x030 6 924927 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 52 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/EEB0B8EDEE61 b/SSD/China/G521/G521N 256G/EEB0B8EDEE61 new file mode 100644 index 000000000..3139a9a97 --- /dev/null +++ b/SSD/China/G521/G521N 256G/EEB0B8EDEE61 @@ -0,0 +1,201 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 23 10:40:44 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 106 + 12 Power_Cycle_Count -O--CK 100 100 050 - 106 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 6756 +164 Unknown_Attribute -O--CK 100 100 050 - 22 +165 Unknown_Attribute -O--CK 100 100 050 - 28 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 11 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 8304 +177 Wear_Leveling_Count -O--CK 100 100 050 - 16818811 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 27 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 20033 +242 Total_LBAs_Read -O--CK 100 100 050 - 14310 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 106 --- Lifetime Power-On Resets +0x01 0x010 4 106 --- Power-on Hours +0x01 0x018 6 1312882688 --- Logical Sectors Written +0x01 0x020 6 17152325 --- Number of Write Commands +0x01 0x028 6 937820160 --- Logical Sectors Read +0x01 0x030 6 12710807 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 95 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 262 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521N 256G/FF94668F9F41 b/SSD/China/G521/G521N 256G/FF94668F9F41 new file mode 100644 index 000000000..e7cc4ffd0 --- /dev/null +++ b/SSD/China/G521/G521N 256G/FF94668F9F41 @@ -0,0 +1,208 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521N 256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3618C8 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 18 00:19:03 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 127 + 12 Power_Cycle_Count -O--CK 100 100 050 - 23 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 9060 +163 Unknown_Attribute -O--CK 100 100 050 - 106 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 925 +177 Wear_Leveling_Count -O--CK 100 100 050 - 9588 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 4 +194 Temperature_Celsius -O--CK 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 4805 +242 Total_LBAs_Read -O--CK 100 100 050 - 887 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 127 --- Power-on Hours +0x01 0x018 6 314900480 --- Logical Sectors Written +0x01 0x020 6 3308446 --- Number of Write Commands +0x01 0x028 6 58130432 --- Logical Sectors Read +0x01 0x030 6 960189 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 59 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/G521/G521S 512G/21FBA4032B8C b/SSD/China/G521/G521S 512G/21FBA4032B8C new file mode 100644 index 000000000..a87070989 --- /dev/null +++ b/SSD/China/G521/G521S 512G/21FBA4032B8C @@ -0,0 +1,160 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: G521S 512G +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Sep 30 15:02:04 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 168 + 12 Power_Cycle_Count -O--CK 100 100 050 - 449 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 45 +164 Unknown_Attribute -O--CK 100 100 050 - 10299 +165 Unknown_Attribute -O--CK 100 100 050 - 19 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 16 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 149 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 9164 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 67197 +242 Total_LBAs_Read ----CK 100 100 050 - 45240 +245 Unknown_Attribute -O--CK 100 100 050 - 34502 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 19/54 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 449 --- Lifetime Power-On Resets +0x01 0x010 4 168 --- Power-on Hours +0x01 0x018 6 108880359 --- Logical Sectors Written +0x01 0x020 6 41623388 --- Number of Write Commands +0x01 0x028 6 2964890892 --- Logical Sectors Read +0x01 0x030 6 36513313 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/IM128/IM128-P130/24B7EF85A9C9 b/SSD/China/IM128/IM128-P130/24B7EF85A9C9 new file mode 100644 index 000000000..529bbd30d --- /dev/null +++ b/SSD/China/IM128/IM128-P130/24B7EF85A9C9 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IM128-P130 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQJ1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 19 08:41:20 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7314 + 12 Power_Cycle_Count -O--C- 100 100 000 - 55 +161 Unknown_Attribute -O--C- 100 100 000 - 59 +163 Unknown_Attribute PO---- 100 100 050 - 31 +165 Unknown_Attribute ------ 100 100 000 - 196 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 193 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 30 +194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 4497 +242 Total_LBAs_Read -O--C- 100 100 000 - 21 +249 Unknown_Attribute -O--C- 100 100 000 - 17647 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 55 --- Lifetime Power-On Resets +0x01 0x010 4 7314 --- Power-on Hours +0x01 0x018 6 9431529526 --- Logical Sectors Written +0x01 0x028 6 44667264 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 19 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 27 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 28 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/IM128/IM128-P130/4120C9669440 b/SSD/China/IM128/IM128-P130/4120C9669440 new file mode 100644 index 000000000..afc302f99 --- /dev/null +++ b/SSD/China/IM128/IM128-P130/4120C9669440 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IM128-P130 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQJ1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 13 20:53:18 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 12279 + 12 Power_Cycle_Count -O--C- 100 100 000 - 96 +161 Unknown_Attribute -O--C- 100 100 000 - 51 +163 Unknown_Attribute PO---- 100 100 050 - 44 +165 Unknown_Attribute ------ 100 100 000 - 176 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 168 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 75 +194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 6874 +242 Total_LBAs_Read -O--C- 100 100 000 - 368 +249 Unknown_Attribute -O--C- 100 100 000 - 8009 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 96 --- Lifetime Power-On Resets +0x01 0x010 4 12279 --- Power-on Hours +0x01 0x018 6 14417685293 --- Logical Sectors Written +0x01 0x028 6 771813693 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/IM128/IM128-P130/7C489A265FD3 b/SSD/China/IM128/IM128-P130/7C489A265FD3 new file mode 100644 index 000000000..920909741 --- /dev/null +++ b/SSD/China/IM128/IM128-P130/7C489A265FD3 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IM128-P130 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQJ1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 20 16:45:31 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6316 + 12 Power_Cycle_Count -O--C- 100 100 000 - 54 +161 Unknown_Attribute -O--C- 100 100 000 - 52 +163 Unknown_Attribute PO---- 100 100 050 - 47 +165 Unknown_Attribute ------ 100 100 000 - 153 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 148 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 38 +194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 6538 +242 Total_LBAs_Read -O--C- 100 100 000 - 27 +249 Unknown_Attribute -O--C- 100 100 000 - 7090 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 54 --- Lifetime Power-On Resets +0x01 0x010 4 6316 --- Power-on Hours +0x01 0x018 6 13711626783 --- Logical Sectors Written +0x01 0x028 6 56824973 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 32 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 33 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/IM256/IM256-WG30/EFCA056C0459 b/SSD/China/IM256/IM256-WG30/EFCA056C0459 new file mode 100644 index 000000000..5f8b5d90d --- /dev/null +++ b/SSD/China/IM256/IM256-WG30/EFCA056C0459 @@ -0,0 +1,137 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IM256-WG30 +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.29.0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 21 13:52:44 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 16) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 15984 + 12 Power_Cycle_Count PO--CK 100 100 010 - 241 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 115882 +165 Unknown_Attribute PO--CK 100 100 010 - 117 +166 Unknown_Attribute PO--CK 100 100 010 - 56 +167 Unknown_Attribute PO--CK 100 100 010 - 109 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 7312 +242 Total_LBAs_Read PO--CK 100 100 010 - 85 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 00% 13492 - +# 2 Short offline Completed without error 00% 9774 - +# 3 Offline Completed without error 00% 8188 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/China/LANSSL128/LANSSL128GTLC9-SBA-2/94FC71A22956 b/SSD/China/LANSSL128/LANSSL128GTLC9-SBA-2/94FC71A22956 new file mode 100644 index 000000000..e13af0ece --- /dev/null +++ b/SSD/China/LANSSL128/LANSSL128GTLC9-SBA-2/94FC71A22956 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LANSSL128GTLC9-SBA-2 +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 11 13:55:19 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9683 + 12 Power_Cycle_Count -O--C- 100 100 000 - 169 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 61 +173 Unknown_Attribute -O--C- 100 100 000 - 3145806 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 139 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 98 +241 Total_LBAs_Written -O--C- 100 100 000 - 2779 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 169 --- Lifetime Power-On Resets +0x01 0x010 4 9683 --- Power-on Hours +0x01 0x018 6 5828731380 --- Logical Sectors Written +0x01 0x028 6 4570159246 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 768 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 50 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 51 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/M.2/M.2 SSD 128GB/62C7ED6E5819 b/SSD/China/M.2/M.2 SSD 128GB/62C7ED6E5819 new file mode 100644 index 000000000..b9286d71b --- /dev/null +++ b/SSD/China/M.2/M.2 SSD 128GB/62C7ED6E5819 @@ -0,0 +1,186 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: M.2 SSD 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: V8522c50 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 25 03:37:35 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7597 + 12 Power_Cycle_Count -O--CK 100 100 000 - 210 +161 Unknown_Attribute -O--CK 100 100 000 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 12840 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 26 +166 Unknown_Attribute -O--CK 100 100 000 - 11 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 74 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 16938855 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 030 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 3 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 41 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 119 +241 Total_LBAs_Written -O--CK 100 100 000 - 2180 +242 Total_LBAs_Read -O--CK 100 100 000 - 1781 +249 Unknown_Attribute -O--CK 100 100 000 - 930 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 2823 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 28/28 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: -10/125 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 210 --- Lifetime Power-On Resets +0x01 0x010 4 7597 --- Power-on Hours +0x01 0x018 6 4572687431 --- Logical Sectors Written +0x01 0x020 6 98691065 --- Number of Write Commands +0x01 0x028 6 3735126121 --- Logical Sectors Read +0x01 0x030 6 50936223 --- Number of Read Commands +0x01 0x038 6 27347625522 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 830 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/M.2/M.2 SSD 256GB/B7B51102F26C b/SSD/China/M.2/M.2 SSD 256GB/B7B51102F26C new file mode 100644 index 000000000..50073617a --- /dev/null +++ b/SSD/China/M.2/M.2 SSD 256GB/B7B51102F26C @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: M.2 SSD 256GB +Serial Number: -- +Firmware Version: W0406A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Dec 21 23:54:52 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 48 + 12 Power_Cycle_Count -O--CK 100 100 050 - 93 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 6047 +165 Unknown_Attribute -O--CK 100 100 050 - 19 +166 Unknown_Attribute -O--CK 100 100 050 - 4 +167 Unknown_Attribute -O--CK 100 100 050 - 12 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 69 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 17105 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 31894 +242 Total_LBAs_Read ----CK 100 100 050 - 25839 +245 Unknown_Attribute -O--CK 100 100 050 - 28175 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 23/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 93 --- Lifetime Power-On Resets +0x01 0x010 4 48 --- Power-on Hours +0x01 0x018 6 2090222087 --- Logical Sectors Written +0x01 0x020 6 12323577 --- Number of Write Commands +0x01 0x028 6 1693415437 --- Logical Sectors Read +0x01 0x030 6 9134043 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/M.2/M.2 SSD 256GB/FBB9834864CB b/SSD/China/M.2/M.2 SSD 256GB/FBB9834864CB new file mode 100644 index 000000000..af10fddd2 --- /dev/null +++ b/SSD/China/M.2/M.2 SSD 256GB/FBB9834864CB @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: M.2 SSD 256GB +Serial Number: -- +Firmware Version: X0311A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 26 15:57:14 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4 + 12 Power_Cycle_Count -O--CK 100 100 050 - 28 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 1426 +165 Unknown_Attribute -O--CK 100 100 050 - 11 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 6 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 22 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 58 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 11985 +242 Total_LBAs_Read ----CK 100 100 050 - 12226 +245 Unknown_Attribute -O--CK 100 100 050 - 7798 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 40/52 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 785478788 --- Logical Sectors Written +0x01 0x020 6 7609892 --- Number of Write Commands +0x01 0x028 6 801295176 --- Logical Sectors Read +0x01 0x030 6 5759896 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/M.2/M.2 SSD 512GB/EEB3262D193C b/SSD/China/M.2/M.2 SSD 512GB/EEB3262D193C new file mode 100644 index 000000000..c26a23cda --- /dev/null +++ b/SSD/China/M.2/M.2 SSD 512GB/EEB3262D193C @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: M.2 SSD 512GB +Serial Number: -- +Firmware Version: X0528A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 27 23:37:09 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 1 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 2 + 9 Power_On_Hours -O--CK 100 100 050 - 2157 + 12 Power_Cycle_Count -O--CK 100 100 050 - 36 +160 Unknown_Attribute -O--CK 100 100 050 - 2 +161 Unknown_Attribute PO--CK 100 100 050 - 91 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 1294 +165 Unknown_Attribute -O--CK 100 100 050 - 6 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 5 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 2 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 19 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 2 +197 Current_Pending_Sector -O--CK 100 100 050 - 2 +198 Offline_Uncorrectable -O--CK 100 100 050 - 2 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 91 +241 Total_LBAs_Written ----CK 100 100 050 - 22637 +242 Total_LBAs_Read ----CK 100 100 050 - 11281 +245 Unknown_Attribute -O--CK 100 100 050 - 16062 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 25/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 36 --- Lifetime Power-On Resets +0x01 0x010 4 2157 --- Power-on Hours +0x01 0x018 6 1483593428 --- Logical Sectors Written +0x01 0x020 6 37296495 --- Number of Write Commands +0x01 0x028 6 739312531 --- Logical Sectors Read +0x01 0x030 6 3501487 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 17 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/MG BGM.2/MG BGM.2 NGFF SSD 256GB/63758472FCD6 b/SSD/China/MG BGM.2/MG BGM.2 NGFF SSD 256GB/63758472FCD6 new file mode 100644 index 000000000..47e8f9aee --- /dev/null +++ b/SSD/China/MG BGM.2/MG BGM.2 NGFF SSD 256GB/63758472FCD6 @@ -0,0 +1,207 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MG BGM.2 NGFF SSD 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3414BN +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 3 11:50:41 2025 AWST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 26 + 12 Power_Cycle_Count -O--CK 100 100 050 - 7 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 3940 +163 Unknown_Attribute -O--CK 100 100 050 - 74 +164 Unknown_Attribute -O--CK 100 100 050 - 50 +165 Unknown_Attribute -O--CK 100 100 050 - 16 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 5 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 2257 +177 Wear_Leveling_Count -O--CK 100 100 050 - 116467 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 2 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O--CK 100 100 050 - 42 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 7 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 19458 +242 Total_LBAs_Read -O--CK 100 100 050 - 16604 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 26 --- Power-on Hours +0x01 0x018 6 1275199488 --- Logical Sectors Written +0x01 0x020 6 6658019 --- Number of Write Commands +0x01 0x028 6 1088159744 --- Logical Sectors Read +0x01 0x030 6 8721241 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 65 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/MSATA SSD/MSATA SSD 256GB/69E5CE858C1F b/SSD/China/MSATA SSD/MSATA SSD 256GB/69E5CE858C1F new file mode 100644 index 000000000..06998a0da --- /dev/null +++ b/SSD/China/MSATA SSD/MSATA SSD 256GB/69E5CE858C1F @@ -0,0 +1,166 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MSATA SSD 256GB +Serial Number: -- +Firmware Version: W0424A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 8 23:10:03 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1292 + 12 Power_Cycle_Count -O--CK 100 100 050 - 64 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 22 +164 Unknown_Attribute -O--CK 100 100 050 - 4811 +165 Unknown_Attribute -O--CK 100 100 050 - 15 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 4 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 37 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 13502 +242 Total_LBAs_Read ----CK 100 100 050 - 2277 +245 Unknown_Attribute -O--CK 100 100 050 - 17094 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 429 - +# 2 Extended offline Aborted by host 90% 1 - +# 3 Extended offline Aborted by host 90% 1 - +# 4 Extended offline Aborted by host 90% 1 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 20/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x010 4 1292 --- Power-on Hours +0x01 0x018 6 884908622 --- Logical Sectors Written +0x01 0x020 6 9790387 --- Number of Write Commands +0x01 0x028 6 149236323 --- Logical Sectors Read +0x01 0x030 6 2762077 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/China/MSATA/MSATA 1TB SSD/C31875D68A29 b/SSD/China/MSATA/MSATA 1TB SSD/C31875D68A29 new file mode 100644 index 000000000..2a32c20f7 --- /dev/null +++ b/SSD/China/MSATA/MSATA 1TB SSD/C31875D68A29 @@ -0,0 +1,147 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MSATA 1TB SSD +Serial Number: -- +Firmware Version: S0628A0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 23 15:19:59 2025 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 35381 + 12 Power_Cycle_Count -O--CK 100 100 050 - 30 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 139842 +165 Unknown_Attribute -O--CK 100 100 050 - 351 +166 Unknown_Attribute -O--CK 100 100 050 - 224 +167 Unknown_Attribute -O--CK 100 100 050 - 283 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 96 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 19 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1501043 +242 Total_LBAs_Read ----CK 100 100 050 - 21348 +245 Unknown_Attribute -O--CK 100 100 050 - 4981608 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 35378 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 35381 --- Power-on Hours +0x01 0x018 6 3883087254 --- Logical Sectors Written +0x01 0x020 6 105739978 --- Number of Write Commands +0x01 0x028 6 1399064049 --- Logical Sectors Read +0x01 0x030 6 1884864 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 79 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/MSATA/MSATA 256GB/92BD42F216FC b/SSD/China/MSATA/MSATA 256GB/92BD42F216FC new file mode 100644 index 000000000..2d163eb23 --- /dev/null +++ b/SSD/China/MSATA/MSATA 256GB/92BD42F216FC @@ -0,0 +1,231 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD MSATA 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HPS2227O +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 1 00:38:19 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 20839 + 12 Power_Cycle_Count -O--CK 100 100 050 - 332 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 76 +164 Unknown_Attribute -O--CK 100 100 050 - 701 +165 Unknown_Attribute -O--CK 100 100 050 - 1488 +166 Unknown_Attribute -O--CK 100 100 050 - 339 +167 Unknown_Attribute -O--CK 100 100 050 - 806 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 486539264 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 10668965 +177 Wear_Leveling_Count -O--CK 100 100 050 - 36638078 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 54 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 325 +194 Temperature_Celsius -O--CK 100 100 050 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 375147 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 214527 +242 Total_LBAs_Read -O--CK 100 100 050 - 36681 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 19863 hours (827 days + 15 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 50 00 08 a9 00 c8 78 51 00 at LBA = 0x8a900c878 = 37195139192 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 50 00 08 a9 00 c8 78 40 08 00:00:59.980 WRITE FPDMA QUEUED + 60 00 40 00 48 00 0e 6f 00 49 a8 40 08 00:00:59.780 READ FPDMA QUEUED + 60 00 40 00 40 00 0e 6b 00 49 88 40 08 00:00:59.780 READ FPDMA QUEUED + 60 00 80 00 38 00 0e 1c 00 4c 08 40 08 00:00:59.780 READ FPDMA QUEUED + 60 00 a0 00 30 00 0e 18 00 4c c0 40 08 00:00:59.780 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 7230 - +# 2 Offline Self-test routine in progress 10% 7230 - +# 3 Offline Self-test routine in progress 10% 7230 - +# 4 Offline Self-test routine in progress 10% 7230 - +# 5 Offline Self-test routine in progress 10% 7230 - +# 6 Offline Self-test routine in progress 10% 7230 - +# 7 Offline Self-test routine in progress 10% 7230 - +# 8 Offline Self-test routine in progress 10% 7230 - +# 9 Offline Self-test routine in progress 10% 7230 - +#10 Offline Self-test routine in progress 10% 7230 - +#11 Offline Self-test routine in progress 10% 7230 - +#12 Offline Self-test routine in progress 10% 7230 - +#13 Offline Self-test routine in progress 10% 7230 - +#14 Offline Self-test routine in progress 10% 7230 - +#15 Offline Self-test routine in progress 10% 7230 - +#16 Offline Self-test routine in progress 10% 7230 - +#17 Offline Self-test routine in progress 10% 7230 - +#18 Offline Self-test routine in progress 10% 7230 - +#19 Offline Self-test routine in progress 10% 7230 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 332 --- Lifetime Power-On Resets +0x01 0x010 4 20839 --- Power-on Hours +0x01 0x018 6 14059241472 --- Logical Sectors Written +0x01 0x020 6 311260535 --- Number of Write Commands +0x01 0x028 6 2403926016 --- Logical Sectors Read +0x01 0x030 6 45528709 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 420 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1601 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/MV/MV-32/DF70D7A62DA6 b/SSD/China/MV/MV-32/DF70D7A62DA6 new file mode 100644 index 000000000..01a696dc6 --- /dev/null +++ b/SSD/China/MV/MV-32/DF70D7A62DA6 @@ -0,0 +1,93 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MV-32 +Serial Number: -- +Firmware Version: 20150825 +User Capacity: 31,937,527,808 bytes [31.9 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue May 13 14:40:55 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 050 - 0 + 12 Power_Cycle_Count ------ 100 100 050 - 46 +160 Unknown_Attribute ------ 100 100 050 - 0 +161 Unknown_Attribute ------ 100 100 050 - 66 +162 Unknown_Attribute ------ 100 100 050 - 53 +163 Unknown_Attribute ------ 100 100 050 - 14 +164 Unknown_Attribute ------ 100 100 050 - 875616 +165 Unknown_Attribute ------ 100 100 050 - 887 +166 Unknown_Attribute ------ 100 100 050 - 822 +167 Unknown_Attribute ------ 100 100 050 - 853 +192 Power-Off_Retract_Count ------ 100 100 050 - 0 +194 Temperature_Celsius ------ 100 100 000 - 47 (Min/Max 22/65) +195 Hardware_ECC_Recovered ------ 100 100 050 - 344106 +196 Reallocated_Event_Count ------ 100 100 050 - 4 +198 Offline_Uncorrectable ------ 000 000 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +241 Total_LBAs_Written ------ 100 100 050 - 34376 +242 Total_LBAs_Read ------ 100 100 050 - 170 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Read SMART Self-test Log failed: Input/output error + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/China/NGFF 2280/NGFF 2280 256GB SSD/E08D389ADA41 b/SSD/China/NGFF 2280/NGFF 2280 256GB SSD/E08D389ADA41 new file mode 100644 index 000000000..a129e16bf --- /dev/null +++ b/SSD/China/NGFF 2280/NGFF 2280 256GB SSD/E08D389ADA41 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NGFF 2280 256GB SSD +Serial Number: -- +Firmware Version: V0111A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 10:07:40 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1493 + 12 Power_Cycle_Count -O--CK 100 100 050 - 34 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 306 +165 Unknown_Attribute -O--CK 100 100 050 - 22 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 6 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 29 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 41097 +242 Total_LBAs_Read ----CK 100 100 050 - 5698 +245 Unknown_Attribute -O--CK 100 100 050 - 6642 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 27/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 1493 --- Power-on Hours +0x01 0x018 6 2693376012 --- Logical Sectors Written +0x01 0x020 6 101253914 --- Number of Write Commands +0x01 0x028 6 373425896 --- Logical Sectors Read +0x01 0x030 6 1976728 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/NS256/NS256GSSD340/17AA66987BFF b/SSD/China/NS256/NS256GSSD340/17AA66987BFF new file mode 100644 index 000000000..07d0b91f9 --- /dev/null +++ b/SSD/China/NS256/NS256GSSD340/17AA66987BFF @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NS256GSSD340 +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 12 05:01:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 11 + 9 Power_On_Hours -O--CK 100 100 050 - 19427 + 12 Power_Cycle_Count -O--CK 100 100 050 - 87 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 65 +163 Unknown_Attribute -O--CK 100 100 050 - 3 +164 Unknown_Attribute -O--CK 100 100 050 - 17844 +165 Unknown_Attribute -O--CK 100 100 050 - 81 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 43 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 11 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 71 +194 Temperature_Celsius -O---K 100 100 050 - 43 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 438616 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 11 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 65 +241 Total_LBAs_Written ----CK 100 100 050 - 189865 +242 Total_LBAs_Read ----CK 100 100 050 - 46636 +245 Unknown_Attribute -O--CK 100 100 050 - 224617 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 43/43 Celsius +Lifetime Min/Max Temperature: 22/51 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 87 --- Lifetime Power-On Resets +0x01 0x010 4 19427 --- Power-on Hours +0x01 0x018 6 3853106305 --- Logical Sectors Written +0x01 0x020 6 958317170 --- Number of Write Commands +0x01 0x028 6 3056401064 --- Logical Sectors Read +0x01 0x030 6 62893935 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/2139ED768BF2 b/SSD/China/SATA SSD/SATA SSD 120GB/2139ED768BF2 new file mode 100644 index 000000000..426437a5b --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/2139ED768BF2 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM91.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 9 06:25:32 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 065 065 010 - 0/198 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 19 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 41742266 --- Logical Sectors Written +0x01 0x028 6 11041367 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/2C0416228939 b/SSD/China/SATA SSD/SATA SSD 120GB/2C0416228939 new file mode 100644 index 000000000..b47c9bab0 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/2C0416228939 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 16 00:13:14 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 51632 + 12 Power_Cycle_Count -O--C- 100 100 000 - 99 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/45 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 309 (Average 283) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 72 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 90 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 21970 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 99 --- Lifetime Power-On Resets +0x01 0x010 4 51632 --- Power-on Hours +0x01 0x018 6 46075535072 --- Logical Sectors Written +0x01 0x028 6 5039540207 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/42B871C25446 b/SSD/China/SATA SSD/SATA SSD 120GB/42B871C25446 new file mode 100644 index 000000000..a42c35daa --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/42B871C25446 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM91.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 9 06:25:32 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 3 + 12 Power_Cycle_Count -O--C- 100 100 000 - 12 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 086 086 010 - 0/162 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 2 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 5 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 12445563 --- Logical Sectors Written +0x01 0x028 6 3459896 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/4945F407D815 b/SSD/China/SATA SSD/SATA SSD 120GB/4945F407D815 new file mode 100644 index 000000000..840f42e0f --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/4945F407D815 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jun 4 05:48:06 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 8667 + 12 Power_Cycle_Count -O--C- 100 100 000 - 127 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 099 099 000 - 1/91 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 66 (Average 47) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 81 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 98 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 4210 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 127 --- Lifetime Power-On Resets +0x01 0x010 4 8667 --- Power-on Hours +0x01 0x018 6 8831098337 --- Logical Sectors Written +0x01 0x028 6 2142192269 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 744 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/951DEF5BBB46 b/SSD/China/SATA SSD/SATA SSD 120GB/951DEF5BBB46 new file mode 100644 index 000000000..7ae81eca0 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/951DEF5BBB46 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 18:02:37 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 21058 + 12 Power_Cycle_Count -O--C- 100 100 000 - 102 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/48 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 218 (Average 184) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 39 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 93 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 12261 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 21058 --- Power-on Hours +0x01 0x018 6 25714217277 --- Logical Sectors Written +0x01 0x028 6 3810172824 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1419 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/AFCD5835F1A4 b/SSD/China/SATA SSD/SATA SSD 120GB/AFCD5835F1A4 new file mode 100644 index 000000000..79f6e405d --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/AFCD5835F1A4 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 12 21:53:05 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7104 + 12 Power_Cycle_Count -O--C- 100 100 000 - 341 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/162 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 22 (Average 14) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 323 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1993 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 341 --- Lifetime Power-On Resets +0x01 0x010 4 7104 --- Power-on Hours +0x01 0x018 6 4180776853 --- Logical Sectors Written +0x01 0x028 6 268341958 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 494 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/AFEBEA4678F9 b/SSD/China/SATA SSD/SATA SSD 120GB/AFEBEA4678F9 new file mode 100644 index 000000000..b568b49bf --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/AFEBEA4678F9 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jan 23 08:43:47 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 790 + 12 Power_Cycle_Count -O--C- 100 100 000 - 51 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/116 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 204 (Average 173) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 49 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 94 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 11754 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x010 4 790 --- Power-on Hours +0x01 0x018 6 24649974952 --- Logical Sectors Written +0x01 0x028 6 22175359 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 42 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/BA1123E41745 b/SSD/China/SATA SSD/SATA SSD 120GB/BA1123E41745 new file mode 100644 index 000000000..2b5dd75d4 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/BA1123E41745 @@ -0,0 +1,170 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SAFM12.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 12 08:48:18 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34880 + 12 Power_Cycle_Count -O--C- 100 100 000 - 4348 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 3 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/98 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 888 (Average 797) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 218 +194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30) +196 Not_In_Use -O---- 100 100 010 - 0 +218 CRC_Error_Count PO-R-- 100 100 050 - 3 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 55999 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4348 --- Lifetime Power-On Resets +0x01 0x010 4 34880 --- Power-on Hours +0x01 0x018 6 117440048175 --- Logical Sectors Written +0x01 0x020 6 3398071990 --- Number of Write Commands +0x01 0x028 6 13123735879 --- Logical Sectors Read +0x01 0x030 6 259381579 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13484 --- Number of Hardware Resets +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 120 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/C42003FF1BE1 b/SSD/China/SATA SSD/SATA SSD 120GB/C42003FF1BE1 new file mode 100644 index 000000000..e007efaf0 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/C42003FF1BE1 @@ -0,0 +1,146 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: U0330A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jul 5 10:40:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2464 + 12 Power_Cycle_Count -O--CK 100 100 050 - 24 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 8147 +165 Unknown_Attribute -O--CK 100 100 050 - 45 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 8 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 21 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 8633 +242 Total_LBAs_Read ----CK 100 100 050 - 494 +245 Unknown_Attribute -O--CK 100 100 050 - 7159 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 2464 --- Power-on Hours +0x01 0x018 6 565807027 --- Logical Sectors Written +0x01 0x020 6 183741 --- Number of Write Commands +0x01 0x028 6 32423808 --- Logical Sectors Read +0x01 0x030 6 98266 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/E3CAED854254 b/SSD/China/SATA SSD/SATA SSD 120GB/E3CAED854254 new file mode 100644 index 000000000..508c65c21 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/E3CAED854254 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jan 23 08:43:47 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 790 + 12 Power_Cycle_Count -O--C- 100 100 000 - 4 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/170 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 246 (Average 215) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 2 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 92 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 11754 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4 --- Lifetime Power-On Resets +0x01 0x010 4 790 --- Power-on Hours +0x01 0x018 6 24649986233 --- Logical Sectors Written +0x01 0x028 6 21572888 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 42 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/0586FF0603D9 b/SSD/China/SATA SSD/SATA SSD 128GB/0586FF0603D9 new file mode 100644 index 000000000..59ce45972 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/0586FF0603D9 @@ -0,0 +1,305 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HDFED3.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 12 21:51:20 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2 + 12 Power_Cycle_Count -O--C- 100 100 000 - 13 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute -O--C- 100 100 000 - 72 +163 Unknown_Attribute PO---- 100 100 050 - 5 +164 Unknown_Attribute ------ 100 100 000 - 15053 +165 Unknown_Attribute ------ 100 100 000 - 8 +166 Unknown_Attribute ------ 100 100 000 - 7 +167 Unknown_Attribute ------ 100 100 000 - 7 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 10 +194 Temperature_Celsius PO---K 100 100 000 - 40 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 72 +242 Total_LBAs_Read -O--C- 100 100 000 - 23 +249 Unknown_Attribute -O--C- 100 100 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 131 (64 sectors) +Device Error Count: 33295 (device log contains only the most recent 256 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 33295 [7] occurred at disk power-on lifetime: 34063 hours (1419 days + 7 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 11 6b bf 01 e9 21 01 00 40 ff 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 98 e0 83 83 18 3d 17 08 80 75 f8 d9 c0 05:07:45.024 CHECK POWER MODE [RET-4] + 44 74 c9 45 68 0f 69 c1 46 eb 20 b6 84 35d+08:27:33.168 [RESERVED] + f1 b4 1d 7a 80 be 84 00 e1 0f 03 1a 4c 13d+10:49:16.620 SECURITY SET PASSWORD + 01 b0 4d c6 42 b9 06 0b 49 03 44 00 8d 26d+15:50:59.794 [RESERVED] + 46 93 0f 41 c0 c8 41 e0 80 02 c0 10 41 14d+21:23:30.244 [RESERVED] + +Error 33294 [6] occurred at disk power-on lifetime: 828 hours (34 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 80 -- 85 b2 65 b0 74 0f 1d b6 ef 45 c1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff 44 16 ce 89 ff e9 89 57 c2 44 ff f0 49d+15:35:44.310 [VENDOR SPECIFIC] + 73 02 f9 0d 77 03 99 3d e4 73 80 10 83 07:43:07.267 SEEK [RET-4] + 65 17 00 c4 37 02 83 f1 c1 04 11 80 a5 12d+15:45:28.559 RECEIVE FPDMA QUEUED + 29 e0 5d 29 0f c0 29 d0 4d 0f 55 0f 29 46d+21:38:24.304 READ MULTIPLE EXT + 20 0f 05 01 10 10 10 10 0f 49 0f 51 4a 2d+22:47:06.768 READ SECTOR(S) + +Error 33293 [5] occurred at disk power-on lifetime: 36168 hours (1507 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 4a -- 8d 41 05 08 b6 c1 4a 0f ff 44 b6 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 48 51 02 0f f0 f0 7f f6 48 02 85 05 f5 2d+23:09:24.701 [RESERVED] + 00 89 44 31 ca ff 10 e8 fc 67 c0 55 c6 30d+01:05:49.963 NOP [Reserved subcommand] [OBS-ACS-2] + 45 c8 b7 8d 44 3e 83 08 f8 41 41 72 0f 26d+15:43:08.801 WRITE UNCORRECTABLE EXT + 0f b7 0f 49 42 c9 0f 40 b7 44 01 3f 44 12d+19:01:10.133 [RESERVED] + 91 74 00 44 4a 3a 04 b6 41 52 0f 1a 01 1d+00:39:42.607 INITIALIZE DEVICE PARAMETERS [OBS-6] + +Error 33292 [4] occurred at disk power-on lifetime: 31360 hours (1306 days + 16 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 2c 10 00 02 0b 5e 50 0d ac 00 91 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 01 0f 42 44 b6 83 e8 05 04 c1 07 e0 0e 30d+00:10:16.192 [RESERVED] + 1f 00 90 77 11 00 71 00 90 1f 90 1c ad 41d+08:57:41.264 RECALIBRATE [RET-4] + 1a 19 3d 02 9b c3 02 00 5d 75 00 80 80 4d+06:58:58.160 RECALIBRATE [RET-4] + 94 0d 73 c0 31 08 07 f6 05 44 42 0f d0 2d+06:47:49.759 STANDBY IMMEDIATE [RET-4] + 49 71 8d 83 04 89 de 3e 41 73 fe f0 08 11d+02:49:21.856 [RESERVED] + +Error 33291 [3] occurred at disk power-on lifetime: 28921 hours (1205 days + 1 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 80 -- 11 7f e1 72 f9 0b 72 80 88 24 09 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 01 07 04 00 f1 04 4d 0f 8a 85 30 f2 65 35d+08:27:26.670 [RESERVED] + 89 3c 79 20 09 07 00 2f 45 f1 aa 4c 40 18d+11:01:24.411 [VENDOR SPECIFIC] + bf f1 0b 01 01 b6 44 b6 0f c9 0f c6 4b 36d+21:27:59.822 [RESERVED] + 61 31 45 0f e4 01 00 bb 02 0e 1f 10 e7 5d+17:15:49.645 WRITE FPDMA QUEUED + fa b4 74 81 41 ab 0e a0 e0 12 ff 80 12 26d+15:52:47.477 [VENDOR SPECIFIC] + +Error 33290 [2] occurred at disk power-on lifetime: 65411 hours (2725 days + 11 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 0e -- b9 82 0f 02 00 71 5c 21 25 11 40 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 46 05 cc 3c 43 12 46 72 00 25 70 02 08 24d+13:35:33.248 [RESERVED] + 40 0b 02 e7 00 03 88 06 73 40 34 eb 4b 38d+03:48:58.176 READ VERIFY SECTOR(S) + 76 80 01 0f e2 49 0d 53 30 36 88 8b 50 26d+10:03:55.789 SEEK [RET-4] + 72 75 02 49 7a 03 0d 46 52 35 8b 3c 48 23d+02:34:52.610 SEEK [RET-4] + 0d ee 89 00 5e 00 94 18 20 e2 20 0c 44 24d+13:32:14.464 [RESERVED] + +Error 33289 [1] occurred at disk power-on lifetime: 13312 hours (554 days + 16 hours) + When the command that caused the error occurred, the device was in a vendor specific state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 2a 32 75 d2 4c 8b 85 56 41 78 08 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + f6 3d 80 31 63 40 2d 10 00 41 00 85 31 47d+04:28:27.321 SECURITY DISABLE PASSWORD + 10 a0 3c 24 04 f6 4c 89 89 e7 4c ff 5a 19:24:21.408 RECALIBRATE [OBS-4] + 03 72 04 49 14 76 41 7e 8b 18 8b 20 00 43d+23:24:03.504 CFA REQUEST EXTENDED ERROR + 1d 84 45 49 e4 d0 8b dc 5d 48 89 74 ff 12:43:02.077 RECALIBRATE [RET-4] + 31 a7 bf 22 aa 89 18 01 4d f3 db e8 20 48d+23:17:53.768 WRITE SECTOR(S) (w/o retry) [OBS-5] + +Error 33288 [0] occurred at disk power-on lifetime: 20107 hours (837 days + 19 hours) + When the command that caused the error occurred, the device was sleeping. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + f1 -- 00 ff ff f3 be 85 e3 c0 48 21 71 at LBA = 0xf3be85e3c048 = 267999615631432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 e8 44 09 eb 00 b1 bd 22 06 41 45 0f 45d+02:20:13.001 WRITE SECTOR(S) (w/o retry) [OBS-5] + bd 41 1f 94 0f 00 de b8 20 3d c4 41 f0 14d+18:11:16.996 [RESERVED] + 20 48 e1 5d 89 83 e3 4c 49 89 d0 7e 01 7d+03:41:16.788 READ SECTOR(S) + 14 00 a7 44 00 3d 00 50 80 00 2d 18 e9 11:41:17.984 RECALIBRATE [RET-4] + bb 49 15 06 8b 3d 38 0f 80 b6 44 2c 74 4d+17:56:30.592 [RESERVED FOR COMPACTFLASH ASSOCIATION] + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 131 (1 sectors) +Invalid Self-test Log index = 0x77fc (reserved = 0xfa) +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 4718595 --- Logical Sectors Written +0x01 0x028 6 1564566 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -89 --- Current Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 87 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/254D565310DC b/SSD/China/SATA SSD/SATA SSD 128GB/254D565310DC new file mode 100644 index 000000000..55381259c --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/254D565310DC @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: W0630B0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 3 23:11:20 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 12583 + 12 Power_Cycle_Count -O--CK 100 100 050 - 43 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 44003 +165 Unknown_Attribute -O--CK 100 100 050 - 302 +166 Unknown_Attribute -O--CK 100 100 050 - 36 +167 Unknown_Attribute -O--CK 100 100 050 - 90 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 34 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 158158 +242 Total_LBAs_Read ----CK 100 100 050 - 1615 +245 Unknown_Attribute -O--CK 100 100 050 - 230076 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 22/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 12583 --- Power-on Hours +0x01 0x018 6 1775125792 --- Logical Sectors Written +0x01 0x020 6 453368889 --- Number of Write Commands +0x01 0x028 6 105890199 --- Logical Sectors Read +0x01 0x030 6 2682755 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/30B2EA7952E3 b/SSD/China/SATA SSD/SATA SSD 128GB/30B2EA7952E3 new file mode 100644 index 000000000..cdbfd0880 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/30B2EA7952E3 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 11:38:45 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 35 + 12 Power_Cycle_Count -O--C- 100 100 000 - 5 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/15 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 2 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 36 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 35 --- Power-on Hours +0x01 0x018 6 76730699 --- Logical Sectors Written +0x01 0x028 6 2379450 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 17 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/566EA283E098 b/SSD/China/SATA SSD/SATA SSD 128GB/566EA283E098 new file mode 100644 index 000000000..44e7461a4 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/566EA283E098 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 22 11:27:53 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 93 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/11 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 11 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 116 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 93 --- Power-on Hours +0x01 0x018 6 243929955 --- Logical Sectors Written +0x01 0x028 6 26386776 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 81 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/665E78784D94 b/SSD/China/SATA SSD/SATA SSD 128GB/665E78784D94 new file mode 100644 index 000000000..66ca9c79b --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/665E78784D94 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFMP1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 5 03:06:15 2025 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 76 + 12 Power_Cycle_Count -O--C- 100 100 000 - 163 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 29 +173 Unknown_Attribute -O--C- 100 100 000 - 458768 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 83 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 680 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 163 --- Lifetime Power-On Resets +0x01 0x010 4 76 --- Power-on Hours +0x01 0x018 6 1427405476 --- Logical Sectors Written +0x01 0x028 6 3205633137 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 311 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/6C2A666A5959 b/SSD/China/SATA SSD/SATA SSD 128GB/6C2A666A5959 new file mode 100644 index 000000000..cbad560d5 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/6C2A666A5959 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM61.1 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 30 12:47:26 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 40242 + 12 Power_Cycle_Count -O--C- 100 100 000 - 375 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 090 090 010 - 0/115 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 162 (Average 135) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 318 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 86 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 17650 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 375 --- Lifetime Power-On Resets +0x01 0x010 4 40242 --- Power-on Hours +0x01 0x018 6 37014981633 --- Logical Sectors Written +0x01 0x028 6 1446471689 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/93C77B1A88AC b/SSD/China/SATA SSD/SATA SSD 128GB/93C77B1A88AC new file mode 100644 index 000000000..e9f42ed0a --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/93C77B1A88AC @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 18 22:35:17 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 3 + 12 Power_Cycle_Count -O--C- 100 100 000 - 10 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/67 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 4 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 9570569 --- Logical Sectors Written +0x01 0x028 6 2191988 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 21 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/9D93A7460338 b/SSD/China/SATA SSD/SATA SSD 128GB/9D93A7460338 new file mode 100644 index 000000000..4fde8be80 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/9D93A7460338 @@ -0,0 +1,116 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S5FAM030 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Jul 19 20:01:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 255) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20000 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1205 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 91 +170 Unknown_Attribute PO---- 100 100 010 - 8589934845 +173 Unknown_Attribute -O--C- 100 100 000 - 152308467 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/A1F4B3FC49AC b/SSD/China/SATA SSD/SATA SSD 128GB/A1F4B3FC49AC new file mode 100644 index 000000000..12d5d1da7 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/A1F4B3FC49AC @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 18 13:59:42 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4910 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/8 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 51 (Average 28) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 4253 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 4910 --- Power-on Hours +0x01 0x018 6 8919794773 --- Logical Sectors Written +0x01 0x028 6 1709987218 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 56 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/CA1749056DC9 b/SSD/China/SATA SSD/SATA SSD 128GB/CA1749056DC9 new file mode 100644 index 000000000..9a1b76c73 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/CA1749056DC9 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: W0630B0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Dec 20 16:04:56 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 18569 + 12 Power_Cycle_Count -O--CK 100 100 050 - 41 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 5 +164 Unknown_Attribute -O--CK 100 100 050 - 343 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 34 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 752 +242 Total_LBAs_Read ----CK 100 100 050 - 321 +245 Unknown_Attribute -O--CK 100 100 050 - 682 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 20/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 18569 --- Power-on Hours +0x01 0x018 6 49299040 --- Logical Sectors Written +0x01 0x020 6 150584 --- Number of Write Commands +0x01 0x028 6 21098525 --- Logical Sectors Read +0x01 0x030 6 269808 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/D2F2AAE53C0F b/SSD/China/SATA SSD/SATA SSD 128GB/D2F2AAE53C0F new file mode 100644 index 000000000..e3b2645ba --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/D2F2AAE53C0F @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 16:04:36 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6167 + 12 Power_Cycle_Count -O--C- 100 100 000 - 47 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/17 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 232 (Average 204) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 40 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 93 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 19954 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 6167 --- Power-on Hours +0x01 0x018 6 41846625913 --- Logical Sectors Written +0x01 0x028 6 1696208924 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 303 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 128GB/F1F802F1EE8C b/SSD/China/SATA SSD/SATA SSD 128GB/F1F802F1EE8C new file mode 100644 index 000000000..278e16723 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 128GB/F1F802F1EE8C @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 28 22:45:46 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2623 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2427 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 255 255 010 - 53 +173 Unknown_Attribute -O--C- 100 100 000 - 15466760 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 148 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 76 +241 Total_LBAs_Written -O--C- 100 100 000 - 9292 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2427 --- Lifetime Power-On Resets +0x01 0x010 4 2623 --- Power-on Hours +0x01 0x018 6 19487793968 --- Logical Sectors Written +0x01 0x028 6 7706796853 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 23 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/01C5380C6048 b/SSD/China/SATA SSD/SATA SSD 16GB/01C5380C6048 new file mode 100644 index 000000000..54b29bcef --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/01C5380C6048 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Apr 11 14:59:22 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 33769 + 12 Power_Cycle_Count -O--C- 100 100 000 - 28 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/24 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 430 (Average 397) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 86 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 3431 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3851 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 33769 --- Power-on Hours +0x01 0x018 6 7197020909 --- Logical Sectors Written +0x01 0x028 6 1136046723 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/178FFB84AE2B b/SSD/China/SATA SSD/SATA SSD 16GB/178FFB84AE2B new file mode 100644 index 000000000..76480477c --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/178FFB84AE2B @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 29 09:38:24 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20734 + 12 Power_Cycle_Count -O--C- 100 100 000 - 806 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/16 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 205 (Average 148) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 802 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 95 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1821 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 806 --- Lifetime Power-On Resets +0x01 0x010 4 20734 --- Power-on Hours +0x01 0x018 6 3819709292 --- Logical Sectors Written +0x01 0x028 6 1834550366 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/1E8470904971 b/SSD/China/SATA SSD/SATA SSD 16GB/1E8470904971 new file mode 100644 index 000000000..dcb265496 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/1E8470904971 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM01.0 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 15 12:37:17 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 44147 + 12 Power_Cycle_Count -O--C- 100 100 000 - 155 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 093 093 010 - 0/16 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 861 (Average 809) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 119 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 73 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 9724 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 155 --- Lifetime Power-On Resets +0x01 0x010 4 44147 --- Power-on Hours +0x01 0x018 6 20394085451 --- Logical Sectors Written +0x01 0x028 6 129000526 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 26 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/22B2C67BCC43 b/SSD/China/SATA SSD/SATA SSD 16GB/22B2C67BCC43 new file mode 100644 index 000000000..ca2d39856 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/22B2C67BCC43 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 30 12:37:49 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 25385 + 12 Power_Cycle_Count -O--C- 100 100 000 - 37 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/14 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1552 (Average 1496) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 35 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 50 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 10112 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 25385 --- Power-on Hours +0x01 0x018 6 21206526192 --- Logical Sectors Written +0x01 0x028 6 94405244 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 49 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 63 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 63 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/27191ADE971C b/SSD/China/SATA SSD/SATA SSD 16GB/27191ADE971C new file mode 100644 index 000000000..9410d3c48 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/27191ADE971C @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM01.0 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 30 17:29:43 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 60682 + 12 Power_Cycle_Count -O--C- 100 100 000 - 83 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 096 096 010 - 0/7 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1253 (Average 1198) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 71 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 60 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 9421 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 83 --- Lifetime Power-On Resets +0x01 0x010 4 60682 --- Power-on Hours +0x01 0x018 6 19758923924 --- Logical Sectors Written +0x01 0x028 6 175299972 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 39 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/453E4EF1679B b/SSD/China/SATA SSD/SATA SSD 16GB/453E4EF1679B new file mode 100644 index 000000000..5f0742d35 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/453E4EF1679B @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM01.0 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 20 14:12:24 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1194 + 12 Power_Cycle_Count -O--C- 100 100 000 - 79 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 099 099 010 - 0/4 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 25 (Average 21) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 62 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 275 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 79 --- Lifetime Power-On Resets +0x01 0x010 4 1194 --- Power-on Hours +0x01 0x018 6 577788368 --- Logical Sectors Written +0x01 0x028 6 21680814 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/4BA6B4618249 b/SSD/China/SATA SSD/SATA SSD 16GB/4BA6B4618249 new file mode 100644 index 000000000..461319397 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/4BA6B4618249 @@ -0,0 +1,141 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM02.8 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 10 18:39:08 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2092 + 12 Power_Cycle_Count -O--C- 100 100 000 - 12 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO--C- 100 100 010 - 0/8 +173 MaxAvgErase_Ct ------ 100 100 000 - 2320 (Average 2805) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius PO---K 070 070 000 - 30 +196 Not_In_Use ------ 100 100 000 - 1 +218 CRC_Error_Count ------ 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 21742754 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 77 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 134 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 135 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/4D12950615E3 b/SSD/China/SATA SSD/SATA SSD 16GB/4D12950615E3 new file mode 100644 index 000000000..52be08a6c --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/4D12950615E3 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 23:25:02 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 37011 + 12 Power_Cycle_Count -O--C- 100 100 000 - 37 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/27 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 2680 (Average 2630) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 33 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 12 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 26816 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 37011 --- Power-on Hours +0x01 0x018 6 56238538767 --- Logical Sectors Written +0x01 0x028 6 418983911 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 87 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 99 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 99 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/4F9BB870C491 b/SSD/China/SATA SSD/SATA SSD 16GB/4F9BB870C491 new file mode 100644 index 000000000..a0ed9e3ca --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/4F9BB870C491 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 25 13:55:01 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 17329 + 12 Power_Cycle_Count -O--C- 100 100 000 - 55 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/17 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 464 (Average 413) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 86 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 5014 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 55 --- Lifetime Power-On Resets +0x01 0x010 4 17329 --- Power-on Hours +0x01 0x018 6 10516308550 --- Logical Sectors Written +0x01 0x028 6 643552763 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/4FF21DB1F917 b/SSD/China/SATA SSD/SATA SSD 16GB/4FF21DB1F917 new file mode 100644 index 000000000..08e119cd2 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/4FF21DB1F917 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Apr 14 01:55:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 80 + 12 Power_Cycle_Count -O--C- 100 100 000 - 27 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/9 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 3 (Average 2) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 21 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 23 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 80 --- Power-on Hours +0x01 0x018 6 49242421 --- Logical Sectors Written +0x01 0x028 6 8409455 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/5CD55960527A b/SSD/China/SATA SSD/SATA SSD 16GB/5CD55960527A new file mode 100644 index 000000000..a56d469d0 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/5CD55960527A @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 28 10:20:07 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16552 + 12 Power_Cycle_Count -O--C- 100 100 000 - 47 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/12 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 2136 (Average 2063) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 41 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 31 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6469 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 16552 --- Power-on Hours +0x01 0x018 6 13566489682 --- Logical Sectors Written +0x01 0x028 6 975921290 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 68 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/6178DC973D42 b/SSD/China/SATA SSD/SATA SSD 16GB/6178DC973D42 new file mode 100644 index 000000000..7ac25ba2c --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/6178DC973D42 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 09:13:54 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 19616 + 12 Power_Cycle_Count -O--C- 100 100 000 - 96 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/20 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 362 (Average 323) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 91 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 89 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 3873 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 96 --- Lifetime Power-On Resets +0x01 0x010 4 19616 --- Power-on Hours +0x01 0x018 6 8123820575 --- Logical Sectors Written +0x01 0x028 6 1450793136 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/6AC626A9A328 b/SSD/China/SATA SSD/SATA SSD 16GB/6AC626A9A328 new file mode 100644 index 000000000..6b6cb7d34 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/6AC626A9A328 @@ -0,0 +1,149 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM02.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: MicroSSD +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 2 09:07:12 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 19339 + 12 Power_Cycle_Count -O--C- 100 100 000 - 180 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Unknown_Attribute ------ 100 100 000 - 14 +170 Bad_Blk_Ct_Lat/Erl PO--C- 100 100 010 - 0/9 +173 MaxAvgErase_Ct ------ 100 100 000 - 214 (Average 661) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 2 +194 Temperature_Celsius PO---K 070 070 000 - 30 +196 Not_In_Use ------ 100 100 000 - 0 +218 CRC_Error_Count ------ 100 100 000 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 92 +233 Flash_Writes_GiB PO--C- 100 100 000 - 2720690 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1763279 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 53409 +246 Total_Erase_Count ------ 100 100 000 - 456823 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 24 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 25 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/7F350F0EE79A b/SSD/China/SATA SSD/SATA SSD 16GB/7F350F0EE79A new file mode 100644 index 000000000..ea7929d61 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/7F350F0EE79A @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 2 09:07:13 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 43503 + 12 Power_Cycle_Count -O--C- 100 100 000 - 37 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 086 086 010 - 0/31 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 981 (Average 940) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 35 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 68 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 13785 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 43503 --- Power-on Hours +0x01 0x018 6 28910093772 --- Logical Sectors Written +0x01 0x028 6 86870732 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 31 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/894162AABC8B b/SSD/China/SATA SSD/SATA SSD 16GB/894162AABC8B new file mode 100644 index 000000000..4b540c2d7 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/894162AABC8B @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 27 12:19:15 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 11336 + 12 Power_Cycle_Count -O--C- 100 100 000 - 85 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 092 092 010 - 0/18 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 145 (Average 116) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 81 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 96 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1480 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 85 --- Lifetime Power-On Resets +0x01 0x010 4 11336 --- Power-on Hours +0x01 0x018 6 3104523397 --- Logical Sectors Written +0x01 0x028 6 31860273 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/A31A86893C82 b/SSD/China/SATA SSD/SATA SSD 16GB/A31A86893C82 new file mode 100644 index 000000000..4f57ebb0b --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/A31A86893C82 @@ -0,0 +1,141 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: S9FM01.5 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 20 16:16:02 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 24914 + 12 Power_Cycle_Count -O--C- 100 100 000 - 717 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO--C- 100 100 010 - 0/3 +173 MaxAvgErase_Ct ------ 100 100 000 - 57 (Average 156) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 6 +218 CRC_Error_Count ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/BC1CE7F714C9 b/SSD/China/SATA SSD/SATA SSD 16GB/BC1CE7F714C9 new file mode 100644 index 000000000..909b41bf1 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/BC1CE7F714C9 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 24 00:34:58 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 29311 + 12 Power_Cycle_Count -O--C- 100 100 000 - 19 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/17 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1409 (Average 1357) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 18 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 54 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 16293 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 29311 --- Power-on Hours +0x01 0x018 6 34169164784 --- Logical Sectors Written +0x01 0x028 6 283558748 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 45 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/C5D937E19672 b/SSD/China/SATA SSD/SATA SSD 16GB/C5D937E19672 new file mode 100644 index 000000000..c62f4aedb --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/C5D937E19672 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Mar 26 14:32:50 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16384 + 12 Power_Cycle_Count -O--C- 100 100 000 - 177 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/16 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 372 (Average 323) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 174 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 89 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 3363 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 177 --- Lifetime Power-On Resets +0x01 0x010 4 16384 --- Power-on Hours +0x01 0x018 6 7053047914 --- Logical Sectors Written +0x01 0x028 6 953486194 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/C7D5432F6F9C b/SSD/China/SATA SSD/SATA SSD 16GB/C7D5432F6F9C new file mode 100644 index 000000000..578a46bc3 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/C7D5432F6F9C @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 15 12:09:41 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 22440 + 12 Power_Cycle_Count -O--C- 100 100 000 - 55 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/24 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 342 (Average 313) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 48 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 89 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2271 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 55 --- Lifetime Power-On Resets +0x01 0x010 4 22440 --- Power-on Hours +0x01 0x018 6 4762857167 --- Logical Sectors Written +0x01 0x028 6 21404449 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/CCD79C0445B6 b/SSD/China/SATA SSD/SATA SSD 16GB/CCD79C0445B6 new file mode 100644 index 000000000..0879f1eae --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/CCD79C0445B6 @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM02.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: MicroSSD +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 14:47:41 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2123 + 12 Power_Cycle_Count -O--C- 100 100 000 - 55 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Unknown_Attribute ------ 100 100 000 - 11 +170 Bad_Blk_Ct_Lat/Erl PO--C- 100 100 010 - 0/7 +173 MaxAvgErase_Ct ------ 100 100 000 - 941 (Average 9812) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius PO---K 070 070 000 - 30 +196 Not_In_Use ------ 100 100 000 - 0 +218 CRC_Error_Count ------ 100 100 000 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 68 +233 Flash_Writes_GiB PO--C- 100 100 000 - 11468702 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2720111 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 633542 +246 Total_Erase_Count ------ 100 100 000 - 2007091 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 31 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 38 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 39 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/DF517F90A41A b/SSD/China/SATA SSD/SATA SSD 16GB/DF517F90A41A new file mode 100644 index 000000000..05870194b --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/DF517F90A41A @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 19 06:58:08 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6647 + 12 Power_Cycle_Count -O--C- 100 100 000 - 110 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/25 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 196 (Average 151) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 99 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 94 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1910 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 110 --- Lifetime Power-On Resets +0x01 0x010 4 6647 --- Power-on Hours +0x01 0x018 6 4005826462 --- Logical Sectors Written +0x01 0x028 6 101044373 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 36 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/EB826930A21F b/SSD/China/SATA SSD/SATA SSD 16GB/EB826930A21F new file mode 100644 index 000000000..9d538e59b --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/EB826930A21F @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 15 08:55:47 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 57989 + 12 Power_Cycle_Count -O--C- 100 100 000 - 25 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 070 070 010 - 0/45 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 869 (Average 835) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 72 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6752 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 57989 --- Power-on Hours +0x01 0x018 6 14160167538 --- Logical Sectors Written +0x01 0x028 6 61890248 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 123 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 124 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/FF69924226FB b/SSD/China/SATA SSD/SATA SSD 16GB/FF69924226FB new file mode 100644 index 000000000..cb5559aab --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/FF69924226FB @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 2 15:43:46 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 12939 + 12 Power_Cycle_Count -O--C- 100 100 000 - 41 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/16 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 531 (Average 472) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 36 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 84 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 3310 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 12939 --- Power-on Hours +0x01 0x018 6 6942398592 --- Logical Sectors Written +0x01 0x028 6 42324291 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 240GB/15F6D2E97DA0 b/SSD/China/SATA SSD/SATA SSD 240GB/15F6D2E97DA0 new file mode 100644 index 000000000..44494ac82 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 240GB/15F6D2E97DA0 @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 1 357924 ... +Firmware Version: SBFMP1.5 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 9 10:39:07 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 51 + 12 Power_Cycle_Count -O--C- 100 100 000 - 34 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 106 +173 Unknown_Attribute -O--C- 100 100 000 - 65538 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 27 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 461 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 51 --- Power-on Hours +0x01 0x018 6 966979051 --- Logical Sectors Written +0x01 0x028 6 6456447 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 240GB/35D3454F2221 b/SSD/China/SATA SSD/SATA SSD 240GB/35D3454F2221 new file mode 100644 index 000000000..df06d6977 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 240GB/35D3454F2221 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 1 357924 ... +Firmware Version: SBFMP1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 9 10:39:07 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 49 + 12 Power_Cycle_Count -O--C- 100 100 000 - 31 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 53 +173 Unknown_Attribute -O--C- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 24 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 20 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--C- 100 100 000 - 24 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 49 --- Power-on Hours +0x01 0x018 6 51324227 --- Logical Sectors Written +0x01 0x028 6 5859117 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 46 --- Number of Hardware Resets +0x06 0x018 4 20 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 240GB/44DE6207DD51 b/SSD/China/SATA SSD/SATA SSD 240GB/44DE6207DD51 new file mode 100644 index 000000000..ab55bfbe6 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 240GB/44DE6207DD51 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 16 10:14:23 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 114 + 12 Power_Cycle_Count -O--C- 100 100 000 - 12 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/73 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 13 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 114 --- Power-on Hours +0x01 0x018 6 27530467 --- Logical Sectors Written +0x01 0x028 6 3915062 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 240GB/47E8C7C3EFCF b/SSD/China/SATA SSD/SATA SSD 240GB/47E8C7C3EFCF new file mode 100644 index 000000000..e5896db09 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 240GB/47E8C7C3EFCF @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 1 357924 ... +Firmware Version: SBFMP1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 9 10:39:07 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 50 + 12 Power_Cycle_Count -O--C- 100 100 000 - 30 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 96 +173 Unknown_Attribute -O--C- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--C- 100 100 000 - 24 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 50 --- Power-on Hours +0x01 0x018 6 51463243 --- Logical Sectors Written +0x01 0x028 6 5830002 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 240GB/4B673AD946FB b/SSD/China/SATA SSD/SATA SSD 240GB/4B673AD946FB new file mode 100644 index 000000000..517cbb0ff --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 240GB/4B673AD946FB @@ -0,0 +1,148 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: U0510A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jun 5 23:07:10 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5 + 12 Power_Cycle_Count -O--CK 100 100 050 - 25 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 17 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 19 +194 Temperature_Celsius -O---K 100 100 050 - 21 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 112 +242 Total_LBAs_Read ----CK 100 100 050 - 14 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 7353891 --- Logical Sectors Written +0x01 0x020 6 70837 --- Number of Write Commands +0x01 0x028 6 969216 --- Logical Sectors Read +0x01 0x030 6 27754 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/China/SATA SSD/SATA SSD 240GB/5F63CBECB66D b/SSD/China/SATA SSD/SATA SSD 240GB/5F63CBECB66D new file mode 100644 index 000000000..0da797301 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 240GB/5F63CBECB66D @@ -0,0 +1,156 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMJ1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Sep 20 16:42:44 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1120 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1210 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 071 071 010 - 0/142 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 81 (Average 73) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 70 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 92 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6063 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 918 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1210 --- Lifetime Power-On Resets +0x01 0x010 4 1120 --- Power-on Hours +0x01 0x018 6 12715615298 --- Logical Sectors Written +0x01 0x028 6 15818564259 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/295A52916575 b/SSD/China/SATA SSD/SATA SSD 256GB/295A52916575 new file mode 100644 index 000000000..3c32128e0 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/295A52916575 @@ -0,0 +1,153 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SDFM00.0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 9 08:50:48 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13788 + 12 Power_Cycle_Count -O--C- 100 100 000 - 76 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 84 +173 Unknown_Attribute -O--C- 100 100 000 - 3080266 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 19 +194 Temperature_Celsius PO---K 078 060 000 - 22 (Min/Max 13/40) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 +241 Total_LBAs_Written -O--C- 100 100 000 - 6699 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 13788 --- Power-on Hours +0x01 0x018 6 14050618114 --- Logical Sectors Written +0x01 0x028 6 302193543 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/33A1CB4DB638 b/SSD/China/SATA SSD/SATA SSD 256GB/33A1CB4DB638 new file mode 100644 index 000000000..9c637abda --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/33A1CB4DB638 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 23 17:34:05 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 8037 + 12 Power_Cycle_Count -O--C- 100 100 000 - 304 +161 Unknown_Attribute -O--C- 100 100 000 - 185 +163 Unknown_Attribute PO---- 100 100 050 - 40 +165 Unknown_Attribute ------ 100 100 000 - 557 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 531 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 140 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 9271 +242 Total_LBAs_Read -O--C- 100 100 000 - 7874 +249 Unknown_Attribute -O--C- 100 100 000 - 124816 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 304 --- Lifetime Power-On Resets +0x01 0x010 4 8037 --- Power-on Hours +0x01 0x018 6 19444408073 --- Logical Sectors Written +0x01 0x028 6 16513726515 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 881 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 53 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/3DB1CC5E5294 b/SSD/China/SATA SSD/SATA SSD 256GB/3DB1CC5E5294 new file mode 100644 index 000000000..a4c89e6b7 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/3DB1CC5E5294 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 8 15:01:28 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 22792 + 12 Power_Cycle_Count -O--C- 100 100 000 - 14 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/67 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 130 (Average 97) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 10 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 96 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 38021 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 22792 --- Power-on Hours +0x01 0x018 6 79736770882 --- Logical Sectors Written +0x01 0x028 6 53790366 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 366 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/4E60D394DBBF b/SSD/China/SATA SSD/SATA SSD 256GB/4E60D394DBBF new file mode 100644 index 000000000..9d96f441e --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/4E60D394DBBF @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SHFM20.2 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 2 18:58:34 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 3263 + 12 Power_Cycle_Count -O--C- 100 100 000 - 16 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/35 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 279 (Average 262) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 067 062 000 - 33 (Min/Max 33/38) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 83 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 26909 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 3263 --- Power-on Hours +0x01 0x018 6 56433413161 --- Logical Sectors Written +0x01 0x028 6 3410634765 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 50 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 17 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/6B709A924B6E b/SSD/China/SATA SSD/SATA SSD 256GB/6B709A924B6E new file mode 100644 index 000000000..b0b54a771 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/6B709A924B6E @@ -0,0 +1,145 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SHFM20.2 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Feb 18 22:19:55 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 12 + 12 Power_Cycle_Count -O--C- 100 100 000 - 48 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 25 +173 Unknown_Attribute -O--C- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 42 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--C- 100 100 000 - 14 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Read SMART Selective Self-test Log failed: Input/output error + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x010 4 12 --- Power-on Hours +0x01 0x018 6 30748735 --- Logical Sectors Written +0x01 0x028 6 5686242 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 50 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/79A875932568 b/SSD/China/SATA SSD/SATA SSD 256GB/79A875932568 new file mode 100644 index 000000000..667cef1f0 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/79A875932568 @@ -0,0 +1,176 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 22 17:12:10 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 10053 + 12 Power_Cycle_Count -O--C- 100 100 000 - 190 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/96 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 57 (Average 25) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 156 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2925 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9778 - +# 2 Short offline Completed without error 00% 9754 - +# 3 Short offline Completed without error 00% 9730 - +# 4 Short offline Completed without error 00% 9706 - +# 5 Short offline Completed without error 00% 9682 - +# 6 Short offline Completed without error 00% 9658 - +# 7 Short offline Completed without error 00% 9634 - +# 8 Short offline Completed without error 00% 9610 - +# 9 Short offline Completed without error 00% 9586 - +#10 Short offline Completed without error 00% 9562 - +#11 Short offline Completed without error 00% 9538 - +#12 Short offline Completed without error 00% 9514 - +#13 Short offline Completed without error 00% 9490 - +#14 Short offline Completed without error 00% 9466 - +#15 Short offline Completed without error 00% 9442 - +#16 Short offline Completed without error 00% 9418 - +#17 Short offline Completed without error 00% 9394 - +#18 Short offline Completed without error 00% 9370 - +#19 Short offline Completed without error 00% 9346 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 190 --- Lifetime Power-On Resets +0x01 0x010 4 10053 --- Power-on Hours +0x01 0x018 6 6135239863 --- Logical Sectors Written +0x01 0x028 6 2475768484 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 621 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/79BB96A31D30 b/SSD/China/SATA SSD/SATA SSD 256GB/79BB96A31D30 new file mode 100644 index 000000000..4eb72075f --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/79BB96A31D30 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 8 15:01:28 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 22792 + 12 Power_Cycle_Count -O--C- 100 100 000 - 14 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/66 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 128 (Average 97) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 10 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 33 +231 SSD_Life_Left PO--C- 100 100 000 - 96 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 37248 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 22792 --- Power-on Hours +0x01 0x018 6 78116318293 --- Logical Sectors Written +0x01 0x028 6 1659723778 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 381 --- Number of Hardware Resets +0x06 0x018 4 33 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/B750CF0906BD b/SSD/China/SATA SSD/SATA SSD 256GB/B750CF0906BD new file mode 100644 index 000000000..403aabdb6 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/B750CF0906BD @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 23 17:49:19 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4272 + 12 Power_Cycle_Count -O--C- 100 100 000 - 15 +161 Unknown_Attribute -O--C- 100 100 000 - 269 +163 Unknown_Attribute PO---- 100 100 050 - 4 +165 Unknown_Attribute ------ 100 100 000 - 1334 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1303 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 2326 +242 Total_LBAs_Read -O--C- 100 100 000 - 36 +249 Unknown_Attribute -O--C- 100 100 000 - 303494 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 4272 --- Power-on Hours +0x01 0x018 6 4879448522 --- Logical Sectors Written +0x01 0x028 6 75753117 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 112 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/D7153E2C6EFE b/SSD/China/SATA SSD/SATA SSD 256GB/D7153E2C6EFE new file mode 100644 index 000000000..97aa31f71 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/D7153E2C6EFE @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 2 13:09:54 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 53 + 12 Power_Cycle_Count -O--C- 100 100 000 - 37 +161 Unknown_Attribute -O--C- 100 100 000 - 269 +163 Unknown_Attribute PO---- 100 100 050 - 4 +165 Unknown_Attribute ------ 100 100 000 - 2 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 85 +242 Total_LBAs_Read -O--C- 100 100 000 - 30 +249 Unknown_Attribute -O--C- 100 100 000 - 116 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 53 --- Power-on Hours +0x01 0x018 6 178826570 --- Logical Sectors Written +0x01 0x028 6 64991274 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 127 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 32GB/01A2553A6F40 b/SSD/China/SATA SSD/SATA SSD 32GB/01A2553A6F40 new file mode 100644 index 000000000..c7e2c158f --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 32GB/01A2553A6F40 @@ -0,0 +1,143 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: S9FM02.5 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 19 18:34:28 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 16) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Retired_Block_Count PO--CK 042 042 000 - 88 + 9 Power_On_Hours -O--CK 100 100 000 - 2057 + 12 Power_Cycle_Count -O--CK 100 100 000 - 458 +171 Unknown_Attribute -O---K 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct PO-RC- 073 073 000 - 13 (Average 193) +174 Unknown_Attribute -O--C- 100 100 000 - 22 +194 Temperature_Celsius -O---K 070 070 000 - 30 +196 Not_In_Use -O--CK 100 100 000 - 88 +218 CRC_Error_Count ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 00% 1186 - +# 2 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 32GB/03A3442869F6 b/SSD/China/SATA SSD/SATA SSD 32GB/03A3442869F6 new file mode 100644 index 000000000..b33f5fd03 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 32GB/03A3442869F6 @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: 01000015 +User Capacity: 30,016,659,456 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 26 13:30:58 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 38263 + 12 Power_Cycle_Count -O--C- 100 100 000 - 141 +163 Unknown_Attribute PO---- 100 100 050 - 16 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 102 +194 Temperature_Celsius PO---K 056 056 000 - 44 (Min/Max 44/44) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 1 +241 Total_LBAs_Written -O--C- 100 100 000 - 17939 +242 Total_LBAs_Read -O--C- 100 100 000 - 104 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 141 --- Lifetime Power-On Resets +0x01 0x010 4 38263 --- Power-on Hours +0x01 0x018 6 37620821322 --- Logical Sectors Written +0x01 0x028 6 219502528 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 44 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 54 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 32GB/F14F5C25BBEE b/SSD/China/SATA SSD/SATA SSD 32GB/F14F5C25BBEE new file mode 100644 index 000000000..24fb2cab3 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 32GB/F14F5C25BBEE @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 30,016,659,456 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Nov 29 11:34:16 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 36291 + 12 Power_Cycle_Count -O--C- 100 100 000 - 22 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/25 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1080 (Average 1028) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 18 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 65 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 19039 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 36291 --- Power-on Hours +0x01 0x018 6 39927821159 --- Logical Sectors Written +0x01 0x028 6 37469678 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 142 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 143 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 480GB/29AF514A6A38 b/SSD/China/SATA SSD/SATA SSD 480GB/29AF514A6A38 new file mode 100644 index 000000000..53b487354 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 480GB/29AF514A6A38 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 15.0-CURRENT amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 24 21:55:33 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 3 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/330 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 2 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x028 6 35188 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 34 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 480GB/64EF214172B7 b/SSD/China/SATA SSD/SATA SSD 480GB/64EF214172B7 new file mode 100644 index 000000000..305ce6a3f --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 480GB/64EF214172B7 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 15.0-CURRENT amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 24 21:55:33 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 6 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/474 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 5 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 13639997 --- Logical Sectors Written +0x01 0x028 6 153691 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 61 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 512GB/03873B2BB4B8 b/SSD/China/SATA SSD/SATA SSD 512GB/03873B2BB4B8 new file mode 100644 index 000000000..077b35914 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 512GB/03873B2BB4B8 @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SHFM20.2 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 25 18:23:17 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4208 + 12 Power_Cycle_Count -O--C- 100 100 000 - 7 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 1/66 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 170 (Average 160) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 3 +194 Temperature_Celsius PO---K 067 064 000 - 33 (Min/Max 33/36) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 90 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 44781 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3925 - +# 2 Extended offline Completed without error 00% 3512 - +# 3 Short offline Completed without error 00% 3196 - +# 4 Extended offline Completed without error 00% 2759 - +# 5 Short offline Completed without error 00% 2442 - +# 6 Extended offline Completed without error 00% 2005 - +# 7 Short offline Completed without error 00% 1689 - +# 8 Extended offline Completed without error 00% 1276 - +# 9 Short offline Completed without error 00% 959 - +#10 Extended offline Completed without error 00% 522 - +#11 Short offline Completed without error 00% 205 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 4208 --- Power-on Hours +0x01 0x018 6 93914244411 --- Logical Sectors Written +0x01 0x028 6 642989869 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 50 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 512GB/0D427FE31A03 b/SSD/China/SATA SSD/SATA SSD 512GB/0D427FE31A03 new file mode 100644 index 000000000..dde3e33e7 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 512GB/0D427FE31A03 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SHFM20.2 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 25 18:23:18 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4178 + 12 Power_Cycle_Count -O--C- 100 100 000 - 7 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 1/67 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 170 (Average 159) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 3 +194 Temperature_Celsius PO---K 067 062 000 - 33 (Min/Max 33/38) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 90 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 44781 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3922 - +# 2 Extended offline Completed without error 00% 3512 - +# 3 Short offline Completed without error 00% 3198 - +# 4 Extended offline Completed without error 00% 2764 - +# 5 Short offline Completed without error 00% 2450 - +# 6 Extended offline Completed without error 00% 2016 - +# 7 Short offline Completed without error 00% 1701 - +# 8 Extended offline Completed without error 00% 1291 - +# 9 Short offline Completed without error 00% 977 - +#10 Extended offline Completed without error 00% 542 - +#11 Short offline Completed without error 00% 228 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 4178 --- Power-on Hours +0x01 0x018 6 93914240952 --- Logical Sectors Written +0x01 0x028 6 642226353 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 50 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 512GB/FDE71431B5EC b/SSD/China/SATA SSD/SATA SSD 512GB/FDE71431B5EC new file mode 100644 index 000000000..f2935d0e3 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 512GB/FDE71431B5EC @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 7 10:39:01 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34 + 12 Power_Cycle_Count -O--C- 100 100 000 - 28 +161 Unknown_Attribute -O--C- 100 100 000 - 209 +163 Unknown_Attribute PO---- 100 100 050 - 11 +165 Unknown_Attribute ------ 100 100 000 - 2 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 7 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 198 +242 Total_LBAs_Read -O--C- 100 100 000 - 178 +249 Unknown_Attribute -O--C- 100 100 000 - 319 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 34 --- Power-on Hours +0x01 0x018 6 416037390 --- Logical Sectors Written +0x01 0x028 6 374439036 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 123 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA3/SATA3 240GB SSD/E4591417E89D b/SSD/China/SATA3/SATA3 240GB SSD/E4591417E89D new file mode 100644 index 000000000..2dce5a593 --- /dev/null +++ b/SSD/China/SATA3/SATA3 240GB SSD/E4591417E89D @@ -0,0 +1,240 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA3 240GB SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW201219 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 25 10:29:46 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 642 + 12 Power_Cycle_Count -O--CK 100 100 050 - 153 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 132 +164 Unknown_Attribute -O--CK 100 100 050 - 38 +165 Unknown_Attribute -O--CK 100 100 050 - 50 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 23 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 33554432 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 96111 +177 Wear_Leveling_Count -O--CK 100 100 050 - 561820 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 53 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 34071 +242 Total_LBAs_Read -O--CK 100 100 050 - 33280 +249 Unknown_Attribute -O--CK 100 100 050 - 38312 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 32 hours (1 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 a0 00 02 93 00 c5 90 00 00 at LBA = 0x29300c590 = 11056235920 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 c0 00 a0 00 02 93 00 c5 90 40 00 03:09:36.760 READ FPDMA QUEUED + 60 00 20 00 98 00 02 93 00 c5 70 40 00 03:09:36.760 READ FPDMA QUEUED + 60 00 20 00 90 00 02 14 00 d9 78 40 00 03:09:36.760 READ FPDMA QUEUED + 60 01 00 00 88 00 00 42 00 99 00 40 00 03:09:36.760 READ FPDMA QUEUED + 61 00 08 00 80 00 03 6b 00 19 30 40 00 03:09:36.760 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 153 --- Lifetime Power-On Resets +0x01 0x010 4 642 --- Power-on Hours +0x01 0x018 6 2232877056 --- Logical Sectors Written +0x01 0x020 6 38907780 --- Number of Write Commands +0x01 0x028 6 2181038080 --- Logical Sectors Read +0x01 0x030 6 48420996 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 9484 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9489 Device-to-host register FISes sent due to a COMRESET +0x000b 4 1 CRC errors within host-to-device FIS +0x000d 4 1 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SATA3/SATA3 60GB SSD/BF01A40B6748 b/SSD/China/SATA3/SATA3 60GB SSD/BF01A40B6748 new file mode 100644 index 000000000..bc8866328 --- /dev/null +++ b/SSD/China/SATA3/SATA3 60GB SSD/BF01A40B6748 @@ -0,0 +1,146 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA3 60GB SSD +Serial Number: -- +Firmware Version: S0330A0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 23 02:04:27 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 18221 + 12 Power_Cycle_Count -O--CK 100 100 050 - 28 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 78 +164 Unknown_Attribute -O--CK 100 100 050 - 952686 +165 Unknown_Attribute -O--CK 100 100 050 - 6830 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 682 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 87 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 312731 +242 Total_LBAs_Read ----CK 100 100 050 - 1040 +245 Unknown_Attribute -O--CK 100 100 050 - 285657 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 18221 --- Power-on Hours +0x01 0x018 6 3315308392 --- Logical Sectors Written +0x01 0x020 6 287053 --- Number of Write Commands +0x01 0x028 6 68182464 --- Logical Sectors Read +0x01 0x030 6 99846 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SH00/SH00M128GB/0DC8D842DB52 b/SSD/China/SH00/SH00M128GB/0DC8D842DB52 new file mode 100644 index 000000000..882c671fb --- /dev/null +++ b/SSD/China/SH00/SH00M128GB/0DC8D842DB52 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SH00M128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP22274P +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 25 07:58:51 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10196 + 12 Power_Cycle_Count -O--CK 100 100 050 - 105 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 60 +164 Unknown_Attribute -O--CK 100 100 050 - 187 +165 Unknown_Attribute -O--CK 100 100 050 - 216 +166 Unknown_Attribute -O--CK 100 100 050 - 70 +167 Unknown_Attribute -O--CK 100 100 050 - 155 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1869653 +177 Wear_Leveling_Count -O--CK 100 100 050 - 10187261 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 6 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 60 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 36794 +242 Total_LBAs_Read -O--CK 100 100 050 - 20609 +245 Unknown_Attribute -O--CK 100 100 050 - 517732 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 10196 --- Power-on Hours +0x01 0x018 6 2411331584 --- Logical Sectors Written +0x01 0x020 6 40968171 --- Number of Write Commands +0x01 0x028 6 1350631424 --- Logical Sectors Read +0x01 0x030 6 14819379 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 159 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 336 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SH00/SH00M256GB/CF32439B1C9A b/SSD/China/SH00/SH00M256GB/CF32439B1C9A new file mode 100644 index 000000000..289506353 --- /dev/null +++ b/SSD/China/SH00/SH00M256GB/CF32439B1C9A @@ -0,0 +1,239 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SH00M256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HPS2272P +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 27 16:40:57 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 685 + 12 Power_Cycle_Count -O--CK 100 100 050 - 102 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 99 +163 Unknown_Attribute -O--CK 100 100 050 - 40 +164 Unknown_Attribute -O--CK 100 100 050 - 27 +165 Unknown_Attribute -O--CK 100 100 050 - 205 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 28 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 50331648 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 88558 +177 Wear_Leveling_Count -O--CK 100 100 050 - 36513979 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 485 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 38 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 1 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 99 +241 Total_LBAs_Written -O--CK 100 100 050 - 24387 +242 Total_LBAs_Read -O--CK 100 100 050 - 21059 +245 Unknown_Attribute -O--CK 100 100 050 - 173379 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 665 hours (27 days + 17 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 18 00 0a 35 00 be c0 00 00 at LBA = 0xa3500bec0 = 43838914240 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 04 00 00 18 00 0a 35 00 be c0 40 80 02:59:45.760 WRITE FPDMA QUEUED + 61 04 00 00 10 00 0a 31 00 be c0 40 80 02:59:45.760 WRITE FPDMA QUEUED + 61 04 00 00 38 00 0a e9 00 3f c0 40 80 02:59:45.760 WRITE FPDMA QUEUED + 61 04 00 00 30 00 0a e5 00 3f c0 40 80 02:59:45.760 WRITE FPDMA QUEUED + 61 04 00 00 28 00 0a f9 00 3f c0 40 80 02:59:45.760 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 685 --- Power-on Hours +0x01 0x018 6 1598226432 --- Logical Sectors Written +0x01 0x020 6 23730672 --- Number of Write Commands +0x01 0x028 6 1380122624 --- Logical Sectors Read +0x01 0x030 6 24955988 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 737 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1381 Device-to-host register FISes sent due to a COMRESET +0x000b 4 1 CRC errors within host-to-device FIS +0x000d 4 1 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SH00/SH00M256GB/F471E382AAA8 b/SSD/China/SH00/SH00M256GB/F471E382AAA8 new file mode 100644 index 000000000..c9943acba --- /dev/null +++ b/SSD/China/SH00/SH00M256GB/F471E382AAA8 @@ -0,0 +1,227 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SH00M256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HPS2272P +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 14 21:40:42 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 15365 + 12 Power_Cycle_Count -O--CK 100 100 050 - 40 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 34 +164 Unknown_Attribute -O--CK 100 100 050 - 341 +165 Unknown_Attribute -O--CK 100 100 050 - 1500 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 478 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 93 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1036991 +177 Wear_Leveling_Count -O--CK 100 100 050 - 40409801 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 27 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 924155 +242 Total_LBAs_Read -O--CK 100 100 050 - 20107 +245 Unknown_Attribute -O--CK 100 100 050 - 1268062 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 15337 - +# 2 Offline Self-test routine in progress 10% 15337 - +# 3 Offline Self-test routine in progress 10% 15337 - +# 4 Offline Self-test routine in progress 10% 15337 - +# 5 Offline Self-test routine in progress 10% 15337 - +# 6 Offline Self-test routine in progress 10% 15337 - +# 7 Offline Self-test routine in progress 10% 15337 - +# 8 Offline Self-test routine in progress 10% 15337 - +# 9 Offline Self-test routine in progress 10% 15337 - +#10 Offline Self-test routine in progress 10% 15337 - +#11 Offline Self-test routine in progress 10% 15337 - +#12 Offline Self-test routine in progress 10% 15337 - +#13 Offline Self-test routine in progress 10% 15337 - +#14 Offline Self-test routine in progress 10% 15337 - +#15 Offline Self-test routine in progress 10% 15337 - +#16 Offline Self-test routine in progress 10% 15337 - +#17 Offline Self-test routine in progress 10% 15337 - +#18 Offline Self-test routine in progress 10% 15337 - +#19 Offline Self-test routine in progress 10% 15337 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 15365 --- Power-on Hours +0x01 0x018 6 60565422080 --- Logical Sectors Written +0x01 0x020 6 555307226 --- Number of Write Commands +0x01 0x028 6 1317732352 --- Logical Sectors Read +0x01 0x030 6 14812742 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 84 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 265 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SK600/SK600-128G/95E1ECEC1F26 b/SSD/China/SK600/SK600-128G/95E1ECEC1F26 new file mode 100644 index 000000000..ab3cd0277 --- /dev/null +++ b/SSD/China/SK600/SK600-128G/95E1ECEC1F26 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SK600-128G +Serial Number: -- +Firmware Version: X0411B0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jun 14 22:55:14 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2801 + 12 Power_Cycle_Count -O--CK 100 100 050 - 24 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 29131 +165 Unknown_Attribute -O--CK 100 100 050 - 281 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 73 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 15 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 1911 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 102536 +242 Total_LBAs_Read ----CK 100 100 050 - 5243 +245 Unknown_Attribute -O--CK 100 100 050 - 52852 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 20/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 2801 --- Power-on Hours +0x01 0x018 6 2424896883 --- Logical Sectors Written +0x01 0x020 6 69718672 --- Number of Write Commands +0x01 0x028 6 343649581 --- Logical Sectors Read +0x01 0x030 6 7091071 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 119 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SK600/SK600-128GB/D8F62CA5EAD6 b/SSD/China/SK600/SK600-128GB/D8F62CA5EAD6 new file mode 100644 index 000000000..0b82ac943 --- /dev/null +++ b/SSD/China/SK600/SK600-128GB/D8F62CA5EAD6 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SK600-128GB +Serial Number: -- +Firmware Version: X0222A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Feb 20 12:10:09 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 42 + 12 Power_Cycle_Count -O--CK 100 100 050 - 27 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 440 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 14 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1197 +242 Total_LBAs_Read ----CK 100 100 050 - 545 +245 Unknown_Attribute -O--CK 100 100 050 - 360 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 27/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 42 --- Power-on Hours +0x01 0x018 6 78496170 --- Logical Sectors Written +0x01 0x020 6 1307928 --- Number of Write Commands +0x01 0x028 6 35773839 --- Logical Sectors Read +0x01 0x030 6 536420 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 120GB/5AF098857BA1 b/SSD/China/SSD/SSD 120GB/5AF098857BA1 new file mode 100644 index 000000000..9631e7f77 --- /dev/null +++ b/SSD/China/SSD/SSD 120GB/5AF098857BA1 @@ -0,0 +1,310 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 120GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW200326 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 21 11:49:10 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 21) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 30448 + 12 Power_Cycle_Count -O--CK 100 100 050 - 250 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 334 +164 Unknown_Attribute -O--CK 100 100 050 - 5983809 +165 Unknown_Attribute -O--CK 100 100 050 - 3659 +166 Unknown_Attribute -O--CK 100 100 050 - 3545 +167 Unknown_Attribute -O--CK 100 100 050 - 3593 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 302514581 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 2498656 +177 Wear_Leveling_Count -O--CK 100 100 050 - 322996066 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 156 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 8462 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 717 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 3679309 +242 Total_LBAs_Read -O--CK 100 100 050 - 134422 +249 Unknown_Attribute -O--CK 100 100 050 - 3915606 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 85 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 85 [0] occurred at disk power-on lifetime: 29193 hours (1216 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 70 00 02 19 00 ad a0 00 00 at LBA = 0x21900ada0 = 9009409440 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 70 00 02 19 00 ad a0 40 08 2d+15:25:41.514 READ FPDMA QUEUED + 60 00 08 00 68 00 07 c9 00 ce 50 40 08 2d+15:25:41.514 READ FPDMA QUEUED + 60 00 08 00 60 00 03 64 00 62 08 40 08 2d+15:25:41.514 READ FPDMA QUEUED + 60 00 08 00 58 00 02 19 00 ad 98 40 08 2d+15:25:41.514 READ FPDMA QUEUED + 60 00 08 00 50 00 07 c9 00 ce 48 40 08 2d+15:25:41.514 READ FPDMA QUEUED + +Error 84 [3] occurred at disk power-on lifetime: 28633 hours (1193 days + 1 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 e0 00 00 a2 00 29 60 00 00 at LBA = 0xa2002960 = 2717919584 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 e0 00 00 a2 00 29 60 40 08 29d+00:51:26.550 READ FPDMA QUEUED + 60 00 08 00 d8 00 00 ab 00 29 70 40 08 29d+00:51:26.550 READ FPDMA QUEUED + 60 00 e0 00 d0 00 03 87 00 e7 48 40 08 29d+00:51:26.550 READ FPDMA QUEUED + 60 00 08 00 c8 00 00 74 00 29 a8 40 08 29d+00:51:26.550 READ FPDMA QUEUED + 60 00 18 00 c0 00 00 73 00 29 78 40 08 29d+00:51:26.550 READ FPDMA QUEUED + +Error 83 [2] occurred at disk power-on lifetime: 27834 hours (1159 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 f0 00 01 8a 00 3a c8 00 00 at LBA = 0x18a003ac8 = 6610238152 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 90 00 f0 00 01 8a 00 3a c8 40 08 6d+02:53:24.720 READ FPDMA QUEUED + 61 00 08 00 e8 00 06 c0 00 1b e8 40 08 6d+02:53:24.720 WRITE FPDMA QUEUED + 61 00 38 00 e0 00 02 39 00 0b 28 40 08 6d+02:53:24.720 WRITE FPDMA QUEUED + 61 00 28 00 d8 00 02 39 00 0b 00 40 08 6d+02:53:24.720 WRITE FPDMA QUEUED + 60 00 98 00 d0 00 01 21 00 35 80 40 08 6d+02:53:24.720 READ FPDMA QUEUED + +Error 82 [1] occurred at disk power-on lifetime: 27687 hours (1153 days + 15 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 00 00 0c ad 00 4b 90 00 00 at LBA = 0xcad004b90 = 54442085264 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 40 00 00 00 0c ad 00 4b 90 40 08 00:00:15.640 READ FPDMA QUEUED + 60 00 38 00 f8 00 03 34 00 5f 98 40 08 00:00:15.640 READ FPDMA QUEUED + 60 00 b0 00 f0 00 03 7f 00 66 38 40 08 00:00:15.640 READ FPDMA QUEUED + 60 00 80 00 e8 00 0c 56 00 5a 60 40 08 00:00:15.640 READ FPDMA QUEUED + 60 00 b0 00 e0 00 03 7c 00 66 d8 40 08 00:00:15.640 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 30448 - +# 2 Offline Self-test routine in progress 10% 30448 - +# 3 Offline Self-test routine in progress 10% 30448 - +# 4 Offline Self-test routine in progress 10% 30448 - +# 5 Offline Self-test routine in progress 10% 30448 - +# 6 Offline Self-test routine in progress 10% 30448 - +# 7 Offline Self-test routine in progress 10% 30448 - +# 8 Offline Self-test routine in progress 10% 30448 - +# 9 Offline Self-test routine in progress 10% 30448 - +#10 Offline Self-test routine in progress 10% 30448 - +#11 Offline Self-test routine in progress 10% 30448 - +#12 Offline Self-test routine in progress 10% 30448 - +#13 Offline Self-test routine in progress 10% 30448 - +#14 Offline Self-test routine in progress 10% 30448 - +#15 Offline Self-test routine in progress 10% 30448 - +#16 Offline Self-test routine in progress 10% 30448 - +#17 Offline Self-test routine in progress 10% 30448 - +#18 Offline Self-test routine in progress 10% 30448 - +#19 Offline Self-test routine in progress 10% 30448 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 250 --- Lifetime Power-On Resets +0x01 0x010 4 30448 --- Power-on Hours +0x01 0x018 6 241127194624 --- Logical Sectors Written +0x01 0x020 6 3085585505 --- Number of Write Commands +0x01 0x028 6 8809480192 --- Logical Sectors Read +0x01 0x030 6 189929755 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 672 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1805 Device-to-host register FISes sent due to a COMRESET +0x000b 4 717 CRC errors within host-to-device FIS +0x000d 4 717 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SSD/SSD 120GB/68AC2C7DD71A b/SSD/China/SSD/SSD 120GB/68AC2C7DD71A new file mode 100644 index 000000000..f148ab8cf --- /dev/null +++ b/SSD/China/SSD/SSD 120GB/68AC2C7DD71A @@ -0,0 +1,165 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 120GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: ZD0R024L +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 22:16:25 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3533 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3082 +161 Unknown_Attribute -O--CK 100 100 050 - 1 +162 Unknown_Attribute -O--CK 100 100 000 - 103963 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 146 +166 Unknown_Attribute -O--CK 100 100 000 - 62 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 96 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 182 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 56047395 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 83 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 212 +232 Available_Reservd_Space -O--CK 100 100 000 - 99 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 161 +241 Total_LBAs_Written -O--CK 100 100 000 - 6925 +242 Total_LBAs_Read -O--CK 100 100 000 - 3551 +249 Unknown_Attribute -O--CK 100 100 000 - 6982 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 7474 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3082 --- Lifetime Power-On Resets +0x01 0x010 4 3533 --- Power-on Hours +0x01 0x018 6 14523875157 --- Logical Sectors Written +0x01 0x020 6 173903939 --- Number of Write Commands +0x01 0x028 6 7448337422 --- Logical Sectors Read +0x01 0x030 6 105730164 --- Number of Read Commands +0x01 0x038 6 12720630875 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11159 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 120GB/8DFED4A2028F b/SSD/China/SSD/SSD 120GB/8DFED4A2028F new file mode 100644 index 000000000..81cd1793f --- /dev/null +++ b/SSD/China/SSD/SSD 120GB/8DFED4A2028F @@ -0,0 +1,208 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 120GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HT3618C1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Unavailable +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Jan 24 08:18:01 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 41 + 12 Power_Cycle_Count -O--CK 100 100 050 - 3 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 2660 +163 Unknown_Attribute -O--CK 100 100 050 - 182 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 3 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 544 +242 Total_LBAs_Read -O--CK 100 100 050 - 206 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 41 --- Power-on Hours +0x01 0x018 6 35651584 --- Logical Sectors Written +0x01 0x020 6 558353 --- Number of Write Commands +0x01 0x028 6 13500416 --- Logical Sectors Read +0x01 0x030 6 366326 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SSD/SSD 128GB/180B9ADD7BCC b/SSD/China/SSD/SSD 128GB/180B9ADD7BCC new file mode 100644 index 000000000..96220c74e --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/180B9ADD7BCC @@ -0,0 +1,149 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +Firmware Version: U0510A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 9 14:18:44 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3008 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1099 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 138424 +165 Unknown_Attribute -O--CK 100 100 050 - 487 +166 Unknown_Attribute -O--CK 100 100 050 - 221 +167 Unknown_Attribute -O--CK 100 100 050 - 281 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 96 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 775 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 154430 +242 Total_LBAs_Read ----CK 100 100 050 - 134172 +245 Unknown_Attribute -O--CK 100 100 050 - 638002 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1099 --- Lifetime Power-On Resets +0x01 0x010 4 3008 --- Power-on Hours +0x01 0x018 6 1530795429 --- Logical Sectors Written +0x01 0x020 6 1929 --- Number of Write Commands +0x01 0x028 6 203209213 --- Logical Sectors Read +0x01 0x030 6 14056 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/China/SSD/SSD 128GB/4C5F890EB5D9 b/SSD/China/SSD/SSD 128GB/4C5F890EB5D9 new file mode 100644 index 000000000..2e7c112ba --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/4C5F890EB5D9 @@ -0,0 +1,96 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 macppc] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +Firmware Version: X0122A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 3.0 Gb/s +Local Time is: Mon Dec 1 09:00:29 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 94 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 126 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 19 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 8687 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 31 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 4 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 8 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 71 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 14986 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 8746 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 10443 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 21 - + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/China/SSD/SSD 128GB/6938FACFF81F b/SSD/China/SSD/SSD 128GB/6938FACFF81F new file mode 100644 index 000000000..683c7a044 --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/6938FACFF81F @@ -0,0 +1,256 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW200509 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jun 19 23:18:14 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6543 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1242 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 172 +164 Unknown_Attribute -O--CK 100 100 050 - 218534 +165 Unknown_Attribute -O--CK 100 100 050 - 309 +166 Unknown_Attribute -O--CK 100 100 050 - 244 +167 Unknown_Attribute -O--CK 100 100 050 - 282 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 67108864 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1418436 +177 Wear_Leveling_Count -O--CK 100 100 050 - 7746354 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 76 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 533 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 1 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 220160 +242 Total_LBAs_Read -O--CK 100 100 050 - 211936 +249 Unknown_Attribute -O--CK 100 100 050 - 249072 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 5636 hours (234 days + 20 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 10 00 00 a2 00 16 a0 00 00 at LBA = 0xa20016a0 = 2717914784 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 10 00 00 a2 00 16 a0 40 00 00:02:24.030 READ FPDMA QUEUED + 60 00 28 00 08 00 00 06 00 01 26 40 00 00:02:24.020 READ FPDMA QUEUED + 60 00 08 00 f8 00 00 28 00 00 28 40 00 00:02:24.020 READ FPDMA QUEUED + 60 00 08 00 f0 00 00 28 00 00 10 40 00 00:02:24.020 READ FPDMA QUEUED + 60 00 08 00 e8 00 00 28 00 00 08 40 00 00:02:24.020 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 1396 hours (58 days + 4 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 30 00 00 0c 00 59 68 00 00 at LBA = 0x0c005968 = 201349480 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 15 00 30 00 00 0c 00 59 68 40 00 04:39:43.550 READ FPDMA QUEUED + 60 00 08 00 28 00 07 ab 00 47 d8 40 00 04:39:43.550 READ FPDMA QUEUED + 60 00 08 00 20 00 00 45 00 a8 d0 40 00 04:39:43.550 READ FPDMA QUEUED + 60 00 8f 00 18 00 00 98 00 95 e8 40 00 04:39:43.550 READ FPDMA QUEUED + 60 00 08 00 10 00 00 6b 00 18 78 40 00 04:39:43.550 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1242 --- Lifetime Power-On Resets +0x01 0x010 4 6543 --- Power-on Hours +0x01 0x018 6 14428405760 --- Logical Sectors Written +0x01 0x020 6 302037929 --- Number of Write Commands +0x01 0x028 6 13889437696 --- Logical Sectors Read +0x01 0x030 6 210723314 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 1389 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5215 Device-to-host register FISes sent due to a COMRESET +0x000b 4 1 CRC errors within host-to-device FIS +0x000d 4 1 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SSD/SSD 128GB/8C527B0DC2EA b/SSD/China/SSD/SSD 128GB/8C527B0DC2EA new file mode 100644 index 000000000..33a610166 --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/8C527B0DC2EA @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +Firmware Version: X0528A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 30 11:45:19 2025 -04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 51 + 12 Power_Cycle_Count -O--CK 100 100 050 - 16 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 56 +164 Unknown_Attribute -O--CK 100 100 050 - 1002 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1068 +242 Total_LBAs_Read ----CK 100 100 050 - 272 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 23/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 51 --- Power-on Hours +0x01 0x018 6 70001367 --- Logical Sectors Written +0x01 0x020 6 326101 --- Number of Write Commands +0x01 0x028 6 17826528 --- Logical Sectors Read +0x01 0x030 6 205165 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 128GB/AF97150AD268 b/SSD/China/SSD/SSD 128GB/AF97150AD268 new file mode 100644 index 000000000..14f92ce6c --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/AF97150AD268 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +Firmware Version: SBFQ61I3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Apr 19 18:20:24 2025 -10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 250 + 12 Power_Cycle_Count -O--C- 100 100 000 - 59 +161 Unknown_Attribute -O--C- 100 100 000 - 238 +163 Unknown_Attribute PO---- 100 100 050 - 21 +165 Unknown_Attribute ------ 100 100 000 - 2 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius PO---K 070 070 000 - 30 (Min/Max 30/33) +195 Hardware_ECC_Recovered PO-R-- 100 100 050 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 190 +242 Total_LBAs_Read -O--C- 100 100 000 - 57 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 59 --- Lifetime Power-On Resets +0x01 0x010 4 250 --- Power-on Hours +0x01 0x018 6 400365710 --- Logical Sectors Written +0x01 0x028 6 120026411 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 215 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSD/SSD 128GB/C03740B7881C b/SSD/China/SSD/SSD 128GB/C03740B7881C new file mode 100644 index 000000000..adbd09b04 --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/C03740B7881C @@ -0,0 +1,150 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +Firmware Version: T0910A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 26 18:44:07 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 41) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 21252 + 12 Power_Cycle_Count -O--CK 100 100 050 - 74 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 5 +164 Unknown_Attribute -O--CK 100 100 050 - 15335934 +165 Unknown_Attribute -O--CK 100 100 050 - 22984 +166 Unknown_Attribute -O--CK 100 100 050 - 9735 +167 Unknown_Attribute -O--CK 100 100 050 - 10815 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 49 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 6585248 +242 Total_LBAs_Read ----CK 100 100 050 - 367335 +245 Unknown_Attribute -O--CK 100 100 050 - 38777374 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 90% 19527 - +# 2 Extended offline Interrupted (host reset) 90% 19527 - +# 3 Short offline Interrupted (host reset) 90% 19527 - +# 4 Short offline Interrupted (host reset) 80% 19527 - +# 5 Short offline Completed without error 00% 10 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 21252 --- Power-on Hours +0x01 0x018 6 2074113233 --- Logical Sectors Written +0x01 0x020 6 2311209324 --- Number of Write Commands +0x01 0x028 6 2598869921 --- Logical Sectors Read +0x01 0x030 6 112134496 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 214 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 4 R_ERR response for non-data FIS +0x000a 4 42 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 128GB/E6203DC787EE b/SSD/China/SSD/SSD 128GB/E6203DC787EE new file mode 100644 index 000000000..3d2ce048a --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/E6203DC787EE @@ -0,0 +1,168 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: ZD0R3G5J +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Apr 10 14:48:35 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4881 + 12 Power_Cycle_Count -O--CK 100 100 000 - 151 +161 Unknown_Attribute -O--CK 100 100 050 - 1 +162 Unknown_Attribute -O--CK 100 100 000 - 36233 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 58 +166 Unknown_Attribute -O--CK 100 100 000 - 80 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 99 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 5434822 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 32 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 84 +232 Available_Reservd_Space -O--CK 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 3098 +242 Total_LBAs_Read -O--CK 100 100 000 - 1143 +249 Unknown_Attribute -O--CK 100 100 000 - 2226 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 3928 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1061 - +# 2 Short offline Completed without error 00% 1038 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 151 --- Lifetime Power-On Resets +0x01 0x010 4 4881 --- Power-on Hours +0x01 0x018 6 6497091060 --- Logical Sectors Written +0x01 0x020 6 184651155 --- Number of Write Commands +0x01 0x028 6 2398816039 --- Logical Sectors Read +0x01 0x030 6 31016078 --- Number of Read Commands +0x01 0x038 6 17566471096 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1050 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/China/SSD/SSD 128GB/EB9AEFBDA66B b/SSD/China/SSD/SSD 128GB/EB9AEFBDA66B new file mode 100644 index 000000000..39a680d02 --- /dev/null +++ b/SSD/China/SSD/SSD 128GB/EB9AEFBDA66B @@ -0,0 +1,161 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQBB.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 14 06:13:48 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 483 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +161 Unknown_Attribute -O--C- 100 100 000 - 71 +163 Unknown_Attribute PO---- 100 100 050 - 10 +165 Unknown_Attribute ------ 100 100 000 - 7 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 4 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius PO---K 070 070 000 - 30 (Min/Max 30/33) +195 Hardware_ECC_Recovered PO-R-- 100 100 050 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 189 +242 Total_LBAs_Read -O--C- 100 100 000 - 7 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 483 --- Power-on Hours +0x01 0x018 6 397364777 --- Logical Sectors Written +0x01 0x028 6 15508247 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSD/SSD 1TB/23AC4AF9D8FD b/SSD/China/SSD/SSD 1TB/23AC4AF9D8FD new file mode 100644 index 000000000..27ac438b0 --- /dev/null +++ b/SSD/China/SSD/SSD 1TB/23AC4AF9D8FD @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 1TB +Serial Number: -- +Firmware Version: W0302A0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 17 15:37:18 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4 + 12 Power_Cycle_Count -O--CK 100 100 050 - 13 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 23 +164 Unknown_Attribute -O--CK 100 100 050 - 102 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 7 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1217 +242 Total_LBAs_Read ----CK 100 100 050 - 29955 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 79758471 --- Logical Sectors Written +0x01 0x020 6 161540 --- Number of Write Commands +0x01 0x028 6 1963192655 --- Logical Sectors Read +0x01 0x030 6 15411109 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 1TB/7411B47BCD1B b/SSD/China/SSD/SSD 1TB/7411B47BCD1B new file mode 100644 index 000000000..6890ca0d8 --- /dev/null +++ b/SSD/China/SSD/SSD 1TB/7411B47BCD1B @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 1TB +Serial Number: -- +Firmware Version: W0630B0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 23 16:38:24 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 12980 + 12 Power_Cycle_Count -O--CK 100 100 050 - 50 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 22 +164 Unknown_Attribute -O--CK 100 100 050 - 17999 +165 Unknown_Attribute -O--CK 100 100 050 - 106 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 37 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 30 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 635173 +242 Total_LBAs_Read ----CK 100 100 050 - 71144 +245 Unknown_Attribute -O--CK 100 100 050 - 342751 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 27/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 12980 --- Power-on Hours +0x01 0x018 6 2972030485 --- Logical Sectors Written +0x01 0x020 6 340749181 --- Number of Write Commands +0x01 0x028 6 367533079 --- Logical Sectors Read +0x01 0x030 6 70648539 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 182 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 1TB/FD73007C3EC8 b/SSD/China/SSD/SSD 1TB/FD73007C3EC8 new file mode 100644 index 000000000..ac941c049 --- /dev/null +++ b/SSD/China/SSD/SSD 1TB/FD73007C3EC8 @@ -0,0 +1,293 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 1TB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW210415 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 9 14:18:44 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5985 + 12 Power_Cycle_Count -O--CK 100 100 050 - 2490 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 775 +164 Unknown_Attribute -O--CK 100 100 050 - 194 +165 Unknown_Attribute -O--CK 100 100 050 - 279 +166 Unknown_Attribute -O--CK 100 100 050 - 157 +167 Unknown_Attribute -O--CK 100 100 050 - 198 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 102367251 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 3813623 +177 Wear_Leveling_Count -O--CK 100 100 050 - 17781603 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 33882112 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 440 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 347 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 39054 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 2 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 1182708 +242 Total_LBAs_Read -O--CK 100 100 050 - 873735 +249 Unknown_Attribute -O--CK 100 100 050 - 1189360 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 65535 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 65535 [1] occurred at disk power-on lifetime: 5312 hours (221 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 70 00 63 74 00 09 c0 00 00 at LBA = 0x63740009c0 = 427147921856 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 70 00 63 74 00 09 c0 40 00 00:13:16.660 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:16.480 READ LOG EXT + 61 01 00 00 68 00 63 73 00 09 c0 40 00 00:13:16.470 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.990 READ LOG EXT + 61 01 00 00 60 00 63 72 00 09 c0 40 00 00:13:15.990 WRITE FPDMA QUEUED + +Error 65534 [0] occurred at disk power-on lifetime: 5312 hours (221 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 68 00 63 73 00 09 c0 00 00 at LBA = 0x63730009c0 = 427131144640 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 68 00 63 73 00 09 c0 40 00 00:13:16.470 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.990 READ LOG EXT + 61 01 00 00 60 00 63 72 00 09 c0 40 00 00:13:15.990 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.850 READ LOG EXT + 61 01 00 00 58 00 4e fb 00 c0 d8 40 00 00:13:15.850 WRITE FPDMA QUEUED + +Error 65533 [3] occurred at disk power-on lifetime: 5312 hours (221 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 60 00 63 72 00 09 c0 00 00 at LBA = 0x63720009c0 = 427114367424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 60 00 63 72 00 09 c0 40 00 00:13:15.990 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.850 READ LOG EXT + 61 01 00 00 58 00 4e fb 00 c0 d8 40 00 00:13:15.850 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.670 READ LOG EXT + 61 01 00 00 50 00 63 74 00 09 c0 40 00 00:13:15.660 WRITE FPDMA QUEUED + +Error 65532 [2] occurred at disk power-on lifetime: 5312 hours (221 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 58 00 4e fb 00 c0 d8 00 00 at LBA = 0x4efb00c0d8 = 339218579672 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 58 00 4e fb 00 c0 d8 40 00 00:13:15.850 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.670 READ LOG EXT + 61 01 00 00 50 00 63 74 00 09 c0 40 00 00:13:15.660 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:13:15.480 READ LOG EXT + 61 01 00 00 48 00 63 73 00 09 c0 40 00 00:13:15.470 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2490 --- Lifetime Power-On Resets +0x01 0x010 4 5985 --- Power-on Hours +0x01 0x018 6 77509951488 --- Logical Sectors Written +0x01 0x020 6 383007638 --- Number of Write Commands +0x01 0x028 6 57261096960 --- Logical Sectors Read +0x01 0x030 6 384935357 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 5664 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2905 Device-to-host register FISes sent due to a COMRESET +0x000b 4 219090 CRC errors within host-to-device FIS +0x000d 4 20762 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/China/SSD/SSD 256GB/1D84C52AF2CA b/SSD/China/SSD/SSD 256GB/1D84C52AF2CA new file mode 100644 index 000000000..ef1117fc2 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/1D84C52AF2CA @@ -0,0 +1,165 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R840B +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Apr 7 14:54:36 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2945 + 12 Power_Cycle_Count -O--CK 100 100 000 - 215 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 90074 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 62 +166 Unknown_Attribute -O--CK 100 100 000 - 136 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 98 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 15 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 245258 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 43 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 437 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 7881 +242 Total_LBAs_Read -O--CK 100 100 000 - 544 +249 Unknown_Attribute -O--CK 100 100 000 - 8034 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 7956 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1327 - +# 2 Short offline Aborted by host 60% 1248 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 215 --- Lifetime Power-On Resets +0x01 0x010 4 2945 --- Power-on Hours +0x01 0x018 6 16528749627 --- Logical Sectors Written +0x01 0x020 6 230638270 --- Number of Write Commands +0x01 0x028 6 1141798434 --- Logical Sectors Read +0x01 0x030 6 11669050 --- Number of Read Commands +0x01 0x038 6 10602360901 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 571 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 256GB/2CC1EAFD0C10 b/SSD/China/SSD/SSD 256GB/2CC1EAFD0C10 new file mode 100644 index 000000000..994402632 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/2CC1EAFD0C10 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +Firmware Version: S0424A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 6 22:05:52 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +No failed Attributes found. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 95 + 9 Power_On_Hours -O--CK 100 100 050 - 28112 + 12 Power_Cycle_Count -O--CK 100 100 050 - 223 +160 Unknown_Attribute -O--CK 100 100 050 - 13 +161 Unknown_Attribute PO--CK 100 100 050 - 53687072 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 207405 +165 Unknown_Attribute -O--CK 100 100 050 - 1051 +166 Unknown_Attribute -O--CK 100 100 050 - 284 +167 Unknown_Attribute -O--CK 100 100 050 - 470 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 94 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 95 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 44 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 818445 +196 Reallocated_Event_Count -O--CK 100 100 050 - 13 +197 Current_Pending_Sector -O--CK 100 100 050 - 95 +198 Offline_Uncorrectable -O--CK 100 100 050 - 13 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 53687072 +241 Total_LBAs_Written ----CK 100 100 050 - 714751 +242 Total_LBAs_Read ----CK 100 100 050 - 1007448 +245 Unknown_Attribute -O--CK 100 100 050 - 1470719 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 5 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 5 [0] log entry is empty +Error 4 [3] log entry is empty +Error 3 [2] log entry is empty +Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + 2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT + 2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT + b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG + b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 223 --- Lifetime Power-On Resets +0x01 0x010 4 28112 --- Power-on Hours +0x01 0x018 6 3892285417 --- Logical Sectors Written +0x01 0x020 6 44688 --- Number of Write Commands +0x01 0x028 6 1599643590 --- Logical Sectors Read +0x01 0x030 6 12128 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 256GB/613FF08C3D30 b/SSD/China/SSD/SSD 256GB/613FF08C3D30 new file mode 100644 index 000000000..3c6e4399a --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/613FF08C3D30 @@ -0,0 +1,95 @@ +smartctl 7.5 2025-04-30 r5714 [OpenBSD 7.8 macppc] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +Firmware Version: X0528A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 3.0 Gb/s +Local Time is: Sun Dec 14 16:01:27 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 192 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 254 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 95 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 45 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 14129 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 10 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 154 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 95 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 20834 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 18524 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 13741 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/China/SSD/SSD 256GB/8042DDCADC7F b/SSD/China/SSD/SSD 256GB/8042DDCADC7F new file mode 100644 index 000000000..4c111bda6 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/8042DDCADC7F @@ -0,0 +1,164 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R530E +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 23 21:24:55 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17893 + 12 Power_Cycle_Count -O--CK 100 100 000 - 74 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 461599 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 988 +166 Unknown_Attribute -O--CK 100 100 000 - 99 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 68 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 59 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 809023 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 58 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 944 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 1028 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 25789 +242 Total_LBAs_Read -O--CK 100 100 000 - 190 +249 Unknown_Attribute -O--CK 100 100 000 - 223860 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 25810 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 17893 --- Power-on Hours +0x01 0x018 6 54084018368 --- Logical Sectors Written +0x01 0x020 6 893571234 --- Number of Write Commands +0x01 0x028 6 399785092 --- Logical Sectors Read +0x01 0x030 6 11664393 --- Number of Read Commands +0x01 0x038 6 64415675342 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 376 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 41 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 256GB/8DFED4A2028F b/SSD/China/SSD/SSD 256GB/8DFED4A2028F new file mode 100644 index 000000000..3b9cdf41b --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/8DFED4A2028F @@ -0,0 +1,305 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HT3B22A1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 28 12:00:08 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 31) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 9434 + 12 Power_Cycle_Count -O--CK 100 100 050 - 221 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 25444 +163 Unknown_Attribute -O--CK 100 100 050 - 140 +164 Unknown_Attribute -O--CK 100 100 050 - 1302 +165 Unknown_Attribute -O--CK 100 100 050 - 2366 +166 Unknown_Attribute -O--CK 100 100 050 - 1139 +167 Unknown_Attribute -O--CK 100 100 050 - 1588 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 979707555 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 10889597 +177 Wear_Leveling_Count -O--CK 100 100 050 - 6827441 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 65537 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 115 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 1398882 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 21 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 924790 +242 Total_LBAs_Read -O--CK 100 100 050 - 28434 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 6 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 6 [1] occurred at disk power-on lifetime: 8430 hours (351 days + 6 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 00 00 00 00 00 00 00 00 00 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:15.760 IDENTIFY DEVICE + 6d 08 0c 52 59 59 e3 35 25 86 ca 2b ff 00:00:11.340 [RESERVED] + +Error 5 [0] occurred at disk power-on lifetime: 1579 hours (65 days + 19 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 70 00 07 4d 00 c8 70 00 00 at LBA = 0x74d00c870 = 31356668016 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 c0 00 70 00 07 4d 00 c8 70 40 08 00:01:43.100 WRITE FPDMA QUEUED + 61 01 00 00 68 00 07 4c 00 c8 70 40 08 00:01:43.100 WRITE FPDMA QUEUED + 60 00 b0 00 60 00 07 9d 00 8e 08 40 08 00:01:43.100 READ FPDMA QUEUED + 60 00 a8 00 58 00 07 9b 00 8e c8 40 08 00:01:43.100 READ FPDMA QUEUED + 61 00 48 00 50 00 07 4c 00 c8 28 40 08 00:01:43.100 WRITE FPDMA QUEUED + +Error 4 [3] occurred at disk power-on lifetime: 1524 hours (63 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 90 00 01 6f 00 d4 a8 00 00 at LBA = 0x16f00d4a8 = 6157292712 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 90 00 01 6f 00 d4 a8 40 08 6d+11:03:46.910 WRITE FPDMA QUEUED + 61 00 f0 00 88 00 1c 78 00 44 18 40 08 6d+11:03:46.910 WRITE FPDMA QUEUED + 61 00 f0 00 80 00 1c 77 00 44 28 40 08 6d+11:03:46.910 WRITE FPDMA QUEUED + 61 00 f0 00 78 00 1c 76 00 44 38 40 08 6d+11:03:46.910 WRITE FPDMA QUEUED + 61 00 f0 00 70 00 1c 75 00 44 48 40 08 6d+11:03:46.910 WRITE FPDMA QUEUED + +Error 3 [2] occurred at disk power-on lifetime: 1365 hours (56 days + 21 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 40 00 10 00 1d f0 00 12 18 00 00 at LBA = 0x1df0001218 = 128580588056 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 d0 00 10 00 1d f0 00 12 18 40 08 4d+18:37:57.360 WRITE FPDMA QUEUED + 61 00 e0 00 08 00 04 4b 00 c8 a0 40 08 4d+18:37:57.360 WRITE FPDMA QUEUED + 61 00 10 00 00 00 17 b6 00 48 10 40 08 4d+18:37:57.360 WRITE FPDMA QUEUED + 61 00 e0 00 f8 00 04 4a 00 c8 c0 40 08 4d+18:37:57.360 WRITE FPDMA QUEUED + 61 00 d8 00 f0 00 04 e5 00 c9 88 40 08 4d+18:37:57.360 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 9420 - +# 2 Offline Self-test routine in progress 10% 9420 - +# 3 Offline Self-test routine in progress 10% 9420 - +# 4 Offline Self-test routine in progress 10% 9420 - +# 5 Offline Self-test routine in progress 10% 9420 - +# 6 Offline Self-test routine in progress 10% 9420 - +# 7 Offline Self-test routine in progress 10% 9420 - +# 8 Offline Self-test routine in progress 10% 9420 - +# 9 Offline Self-test routine in progress 10% 9420 - +#10 Offline Self-test routine in progress 10% 9420 - +#11 Offline Self-test routine in progress 10% 9420 - +#12 Offline Self-test routine in progress 10% 9420 - +#13 Offline Self-test routine in progress 10% 9420 - +#14 Offline Self-test routine in progress 10% 9420 - +#15 Offline Self-test routine in progress 10% 9420 - +#16 Offline Self-test routine in progress 10% 9420 - +#17 Offline Self-test routine in progress 10% 9420 - +#18 Offline Self-test routine in progress 10% 9420 - +#19 Offline Self-test routine in progress 10% 9420 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 221 --- Lifetime Power-On Resets +0x01 0x010 4 9434 --- Power-on Hours +0x01 0x018 6 60607037440 --- Logical Sectors Written +0x01 0x020 6 408230810 --- Number of Write Commands +0x01 0x028 6 1863450624 --- Logical Sectors Read +0x01 0x030 6 17119329 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 3918 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3566 Device-to-host register FISes sent due to a COMRESET +0x000b 2 21 CRC errors within host-to-device FIS +0x000d 2 21 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SSD/SSD 256GB/D8D2A79757C3 b/SSD/China/SSD/SSD 256GB/D8D2A79757C3 new file mode 100644 index 000000000..ead6529b3 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/D8D2A79757C3 @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3C09BA +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Nov 17 10:34:33 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 101 + 12 Power_Cycle_Count -O--CK 100 100 050 - 11 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 2148 +163 Unknown_Attribute -O--CK 100 100 050 - 90 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 2 +177 Wear_Leveling_Count -O--CK 100 100 050 - 2483 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 4 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 2213 +242 Total_LBAs_Read -O--CK 100 100 050 - 356 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 101 --- Power-on Hours +0x01 0x018 6 145031168 --- Logical Sectors Written +0x01 0x020 6 2313526 --- Number of Write Commands +0x01 0x028 6 23330816 --- Logical Sectors Read +0x01 0x030 6 378276 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/China/SSD/SSD 256GB/F01C772AF811 b/SSD/China/SSD/SSD 256GB/F01C772AF811 new file mode 100644 index 000000000..360091819 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/F01C772AF811 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +Firmware Version: HAFFA2.0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Nov 11 14:36:32 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5392 + 12 Power_Cycle_Count -O--C- 100 100 000 - 27 +161 Unknown_Attribute -O--C- 100 100 000 - 176 +163 Unknown_Attribute PO---- 100 100 050 - 16 +165 Unknown_Attribute ------ 100 100 000 - 26 +166 Unknown_Attribute ------ 100 100 000 - 1 +167 Unknown_Attribute ------ 100 100 000 - 22 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 21 +194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) +195 Hardware_ECC_Recovered PO-R-- 100 100 050 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 1977 +242 Total_LBAs_Read -O--C- 100 100 000 - 54 +249 Unknown_Attribute -O--C- 100 100 000 - 2105 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 5392 --- Power-on Hours +0x01 0x018 6 4146467922 --- Logical Sectors Written +0x01 0x028 6 115310881 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 88 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSD/SSD 256GB/F26699320663 b/SSD/China/SSD/SSD 256GB/F26699320663 new file mode 100644 index 000000000..9d93d4844 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/F26699320663 @@ -0,0 +1,164 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: ZD0R024L +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 23 12:49:42 2025 NZDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14125 + 12 Power_Cycle_Count -O--CK 100 100 000 - 110 +161 Unknown_Attribute -O--CK 100 100 050 - 3 +162 Unknown_Attribute -O--CK 100 100 000 - 1110417 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 1572 +166 Unknown_Attribute -O--CK 100 100 000 - 95 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 48 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 72 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 1630081 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 1363 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 1654 +232 Available_Reservd_Space -O--CK 100 100 000 - 98 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 193 +241 Total_LBAs_Written -O--CK 100 100 000 - 13416 +242 Total_LBAs_Read -O--CK 100 100 000 - 688 +249 Unknown_Attribute -O--CK 100 100 000 - 286695 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 13994 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 110 --- Lifetime Power-On Resets +0x01 0x010 4 14125 --- Power-on Hours +0x01 0x018 6 28136331418 --- Logical Sectors Written +0x01 0x020 6 535789090 --- Number of Write Commands +0x01 0x028 6 1444114086 --- Logical Sectors Read +0x01 0x030 6 12140760 --- Number of Read Commands +0x01 0x038 6 50852172588 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 376 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 56 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 256GB/F808B4EF0B8B b/SSD/China/SSD/SSD 256GB/F808B4EF0B8B new file mode 100644 index 000000000..ead19212f --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/F808B4EF0B8B @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 256GB +Serial Number: -- +Firmware Version: W0529A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 22 12:16:13 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 8077 + 12 Power_Cycle_Count -O--CK 100 100 050 - 18 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 17 +164 Unknown_Attribute -O--CK 100 100 050 - 230972 +165 Unknown_Attribute -O--CK 100 100 050 - 433 +166 Unknown_Attribute -O--CK 100 100 050 - 133 +167 Unknown_Attribute -O--CK 100 100 050 - 258 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 95 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 15 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 19419 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 354715 +242 Total_LBAs_Read ----CK 100 100 050 - 8635 +245 Unknown_Attribute -O--CK 100 100 050 - 2054869 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 26/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 8077 --- Power-on Hours +0x01 0x018 6 1771808117 --- Logical Sectors Written +0x01 0x020 6 181602535 --- Number of Write Commands +0x01 0x028 6 565931021 --- Logical Sectors Read +0x01 0x030 6 6131771 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 4TB/8230AC3F2F7E b/SSD/China/SSD/SSD 4TB/8230AC3F2F7E new file mode 100644 index 000000000..fd76ba6bc --- /dev/null +++ b/SSD/China/SSD/SSD 4TB/8230AC3F2F7E @@ -0,0 +1,168 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 4TB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VA001CBY +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 22:12:58 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3494 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1312 +161 Unknown_Attribute -O--CK 100 100 050 - 13 +162 Unknown_Attribute -O--CK 100 100 000 - 5876 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 28 +166 Unknown_Attribute -O--CK 100 100 000 - 13 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 343 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 4564663 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 17 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 40 +232 Available_Reservd_Space -O--CK 100 100 000 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 130 +241 Total_LBAs_Written -O--CK 100 100 000 - 1319 +242 Total_LBAs_Read -O--CK 100 100 000 - 713 +249 Unknown_Attribute -O--CK 100 100 000 - 2212 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 1518 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 32 - +# 2 Extended offline Completed without error 00% 1 - +# 3 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1312 --- Lifetime Power-On Resets +0x01 0x010 4 3494 --- Power-on Hours +0x01 0x018 6 2766763031 --- Logical Sectors Written +0x01 0x020 6 23647955 --- Number of Write Commands +0x01 0x028 6 1497289568 --- Logical Sectors Read +0x01 0x030 6 14921602 --- Number of Read Commands +0x01 0x038 6 12566272314 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1185 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 512GB/54BB9DFCD6DE b/SSD/China/SSD/SSD 512GB/54BB9DFCD6DE new file mode 100644 index 000000000..fd87f444a --- /dev/null +++ b/SSD/China/SSD/SSD 512GB/54BB9DFCD6DE @@ -0,0 +1,310 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3215A2 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 23 14:34:56 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 72) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 8) minutes. +Extended self-test routine +recommended polling time: ( 16) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 447 + 12 Power_Cycle_Count -O--CK 100 100 050 - 97 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 10340 +163 Unknown_Attribute -O--CK 100 100 050 - 0 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 402653184 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1161 +177 Wear_Leveling_Count -O--CK 100 100 050 - 33752768 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 65536 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 9 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 14083 +242 Total_LBAs_Read -O--CK 100 100 050 - 14471 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 6 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 6 [1] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 b0 00 00 1e 00 08 48 00 00 at LBA = 0x1e000848 = 503318600 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 d8 00 b0 00 00 1e 00 08 48 40 08 03:53:32.090 READ FPDMA QUEUED + 60 00 e0 00 a8 00 00 1c 00 08 48 40 08 03:53:32.090 READ FPDMA QUEUED + 60 00 e0 00 a0 00 00 02 00 00 48 40 08 03:53:32.090 READ FPDMA QUEUED + 60 00 f8 00 98 00 00 01 00 00 30 40 08 03:53:32.090 READ FPDMA QUEUED + 60 00 58 00 90 00 00 00 00 00 d0 40 08 03:53:32.090 READ FPDMA QUEUED + +Error 5 [0] occurred at disk power-on lifetime: 300 hours (12 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 98 00 01 df 00 8c 50 00 00 at LBA = 0x1df008c50 = 8036322384 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 98 00 01 df 00 8c 50 40 08 01:23:09.580 READ FPDMA QUEUED + 60 00 08 00 90 00 01 df 00 8c 38 40 08 01:23:09.570 READ FPDMA QUEUED + 60 00 08 00 88 00 03 32 00 92 68 40 08 01:23:09.560 READ FPDMA QUEUED + 60 00 08 00 80 00 03 32 00 92 60 40 08 01:23:09.560 READ FPDMA QUEUED + 60 00 08 00 78 00 04 30 00 8e d0 40 08 01:23:09.440 READ FPDMA QUEUED + +Error 4 [3] occurred at disk power-on lifetime: 110 hours (4 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 a8 00 1e ad 00 cd 07 00 00 at LBA = 0x1ead00cd07 = 131751529735 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 a8 00 1e ad 00 cd 07 40 08 19:31:09.040 READ FPDMA QUEUED + 60 00 20 00 a0 00 1e ac 00 cd e7 40 08 19:31:09.040 READ FPDMA QUEUED + 60 00 20 00 98 00 1e ac 00 cd c7 40 08 19:31:09.040 READ FPDMA QUEUED + 60 00 08 00 90 00 1e ac 00 cd bf 40 08 19:31:09.040 READ FPDMA QUEUED + 60 00 18 00 88 00 1e ac 00 cd a7 40 08 19:31:09.040 READ FPDMA QUEUED + +Error 3 [2] occurred at disk power-on lifetime: 105 hours (4 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 f8 00 1b 46 00 e5 e7 00 00 at LBA = 0x1b4600e5e7 = 117138580967 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 06 d8 00 f8 00 1b 46 00 e5 e7 40 08 14:22:37.070 READ FPDMA QUEUED + 60 00 18 00 c8 00 1b 4f 00 e5 a7 40 08 14:22:37.070 READ FPDMA QUEUED + 60 01 d8 00 c0 00 1b 4d 00 e5 c7 40 08 14:22:37.070 READ FPDMA QUEUED + 60 04 58 00 b8 00 1b 42 00 e5 87 40 08 14:22:37.070 READ FPDMA QUEUED + 60 00 18 00 b0 00 1b 42 00 e5 67 40 08 14:22:37.070 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 447 - +# 2 Offline Self-test routine in progress 10% 447 - +# 3 Offline Self-test routine in progress 10% 447 - +# 4 Offline Self-test routine in progress 10% 447 - +# 5 Offline Self-test routine in progress 10% 447 - +# 6 Offline Self-test routine in progress 10% 447 - +# 7 Offline Self-test routine in progress 10% 447 - +# 8 Offline Self-test routine in progress 10% 447 - +# 9 Offline Self-test routine in progress 10% 447 - +#10 Offline Self-test routine in progress 10% 447 - +#11 Offline Self-test routine in progress 10% 447 - +#12 Offline Self-test routine in progress 10% 447 - +#13 Offline Self-test routine in progress 10% 447 - +#14 Offline Self-test routine in progress 10% 447 - +#15 Offline Self-test routine in progress 10% 447 - +#16 Offline Self-test routine in progress 10% 447 - +#17 Offline Self-test routine in progress 10% 447 - +#18 Offline Self-test routine in progress 10% 447 - +#19 Offline Self-test routine in progress 10% 447 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 922943488 --- Logical Sectors Written +0x01 0x020 6 1413223 --- Number of Write Commands +0x01 0x028 6 948371456 --- Logical Sectors Read +0x01 0x030 6 4591631 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 272 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 344 Device-to-host register FISes sent due to a COMRESET +0x000b 2 21 CRC errors within host-to-device FIS +0x000d 2 21 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/China/SSD/SSD 512GB/96DC7AF9476D b/SSD/China/SSD/SSD 512GB/96DC7AF9476D new file mode 100644 index 000000000..60fd3b4eb --- /dev/null +++ b/SSD/China/SSD/SSD 512GB/96DC7AF9476D @@ -0,0 +1,257 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HP3215A2 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 23 14:34:56 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 8) minutes. +Extended self-test routine +recommended polling time: ( 16) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 447 + 12 Power_Cycle_Count -O--CK 100 100 050 - 95 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 10340 +163 Unknown_Attribute -O--CK 100 100 050 - 0 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 67108864 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 843 +177 Wear_Leveling_Count -O--CK 100 100 050 - 33734528 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 7 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 14084 +242 Total_LBAs_Read -O--CK 100 100 050 - 14833 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 157 hours (6 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 38 00 00 66 00 03 00 00 00 at LBA = 0x66000300 = 1711276800 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 0a 00 00 38 00 00 66 00 03 00 40 08 04:39:33.530 READ FPDMA QUEUED + 60 0a 00 00 30 00 00 5c 00 03 00 40 08 04:39:33.530 READ FPDMA QUEUED + 60 0a 00 00 28 00 00 52 00 03 00 40 08 04:39:33.520 READ FPDMA QUEUED + 60 0a 00 00 20 00 00 48 00 03 00 40 08 04:39:33.520 READ FPDMA QUEUED + 60 0a 00 00 18 00 00 3e 00 03 00 40 08 04:39:33.510 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 157 hours (6 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 e0 00 00 16 00 03 00 00 00 at LBA = 0x16000300 = 369099520 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 0a 00 00 e0 00 00 16 00 03 00 40 08 04:39:32.730 READ FPDMA QUEUED + 60 0a 00 00 d8 00 00 0c 00 03 00 40 08 04:39:32.730 READ FPDMA QUEUED + 60 0a 00 00 d0 00 00 02 00 03 00 40 08 04:39:32.720 READ FPDMA QUEUED + 60 0a 00 00 c8 00 00 f8 00 02 00 40 08 04:39:32.720 READ FPDMA QUEUED + 60 0a 00 00 c0 00 00 ee 00 02 00 40 08 04:39:32.710 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 95 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 923009024 --- Logical Sectors Written +0x01 0x020 6 1274693 --- Number of Write Commands +0x01 0x028 6 972095488 --- Logical Sectors Read +0x01 0x030 6 4397336 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 326 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 372 Device-to-host register FISes sent due to a COMRESET +0x000b 2 2 CRC errors within host-to-device FIS +0x000d 2 2 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/China/SSD/SSD 512GB/B27DCC7693BD b/SSD/China/SSD/SSD 512GB/B27DCC7693BD new file mode 100644 index 000000000..149f41031 --- /dev/null +++ b/SSD/China/SSD/SSD 512GB/B27DCC7693BD @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 512GB +Serial Number: -- +Firmware Version: T0703A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 12 03:24:50 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 27045 + 12 Power_Cycle_Count -O--CK 100 100 050 - 199 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 1618779 +165 Unknown_Attribute -O--CK 100 100 050 - 12186 +166 Unknown_Attribute -O--CK 100 100 050 - 103 +167 Unknown_Attribute -O--CK 100 100 050 - 1105 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 79 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 183 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 3936579 +242 Total_LBAs_Read ----CK 100 100 050 - 20858 +245 Unknown_Attribute -O--CK 100 100 050 - 2343879 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 199 --- Lifetime Power-On Resets +0x01 0x010 4 27045 --- Power-on Hours +0x01 0x018 6 289606423 --- Logical Sectors Written +0x01 0x020 6 114412 --- Number of Write Commands +0x01 0x028 6 1366957888 --- Logical Sectors Read +0x01 0x030 6 89493 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 512GB/D3AADEB82494 b/SSD/China/SSD/SSD 512GB/D3AADEB82494 new file mode 100644 index 000000000..d9ed93903 --- /dev/null +++ b/SSD/China/SSD/SSD 512GB/D3AADEB82494 @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 512GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R631D +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 4 15:04:58 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21776 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 213214 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 268 +166 Unknown_Attribute -O--CK 100 100 000 - 59 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 92 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 24 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 974967 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 56 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 49261 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 26 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 302 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 124184 +242 Total_LBAs_Read -O--CK 100 100 000 - 11919 +249 Unknown_Attribute -O--CK 100 100 000 - 3697 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 127853 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 21776 --- Power-on Hours +0x01 0x018 6 260434586780 --- Logical Sectors Written +0x01 0x020 6 2823962937 --- Number of Write Commands +0x01 0x028 6 24997025638 --- Logical Sectors Read +0x01 0x030 6 201970090 --- Number of Read Commands +0x01 0x038 6 78389134329 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 192 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 60GB/4CE2AB45C5A4 b/SSD/China/SSD/SSD 60GB/4CE2AB45C5A4 new file mode 100644 index 000000000..d1d9c7c1f --- /dev/null +++ b/SSD/China/SSD/SSD 60GB/4CE2AB45C5A4 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 60GB +Serial Number: -- +Firmware Version: U0324A0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 27 10:10:19 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2064 + 12 Power_Cycle_Count -O--CK 100 100 050 - 137 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 22853 +165 Unknown_Attribute -O--CK 100 100 050 - 115 +166 Unknown_Attribute -O--CK 100 100 050 - 9 +167 Unknown_Attribute -O--CK 100 100 050 - 46 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 72 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 5149 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 3811 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 24708 +242 Total_LBAs_Read ----CK 100 100 050 - 22170 +245 Unknown_Attribute -O--CK 100 100 050 - 16384 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3811 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3811 [2] log entry is empty +Error 3810 [1] log entry is empty +Error 3809 [0] log entry is empty +Error 3808 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + 2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT + 2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT + b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG + b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6 - +# 2 Short offline Completed without error 00% 6 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 137 --- Lifetime Power-On Resets +0x01 0x010 4 2064 --- Power-on Hours +0x01 0x018 6 1619305848 --- Logical Sectors Written +0x01 0x020 6 90374 --- Number of Write Commands +0x01 0x028 6 1452944068 --- Logical Sectors Read +0x01 0x030 6 89564 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 64GB/08381530375A b/SSD/China/SSD/SSD 64GB/08381530375A new file mode 100644 index 000000000..67e5c1555 --- /dev/null +++ b/SSD/China/SSD/SSD 64GB/08381530375A @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 64GB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 16 08:14:58 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 1 + 9 Power_On_Hours -O--CK 100 100 050 - 9191 + 12 Power_Cycle_Count -O--CK 100 100 050 - 22 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 98 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 154067 +165 Unknown_Attribute -O--CK 100 100 050 - 387 +166 Unknown_Attribute -O--CK 100 100 050 - 197 +167 Unknown_Attribute -O--CK 100 100 050 - 352 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 94 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 20 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 1 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 98 +241 Total_LBAs_Written ----CK 100 100 050 - 1108324 +242 Total_LBAs_Read ----CK 100 100 050 - 49991 +245 Unknown_Attribute -O--CK 100 100 050 - 558169 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 30/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 9191 --- Power-on Hours +0x01 0x018 6 3915696558 --- Logical Sectors Written +0x01 0x020 6 787259705 --- Number of Write Commands +0x01 0x028 6 3276239620 --- Logical Sectors Read +0x01 0x030 6 86084079 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 55 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 26 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 64GB/326E1CE586D5 b/SSD/China/SSD/SSD 64GB/326E1CE586D5 new file mode 100644 index 000000000..3a318fce2 --- /dev/null +++ b/SSD/China/SSD/SSD 64GB/326E1CE586D5 @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 64GB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 2 15:59:54 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 8643 + 12 Power_Cycle_Count -O--CK 100 100 050 - 70 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 30349 +165 Unknown_Attribute -O--CK 100 100 050 - 152 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 68 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 53 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 146325 +242 Total_LBAs_Read ----CK 100 100 050 - 5929 +245 Unknown_Attribute -O--CK 100 100 050 - 73258 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 70 --- Lifetime Power-On Resets +0x01 0x010 4 8643 --- Power-on Hours +0x01 0x018 6 999682100 --- Logical Sectors Written +0x01 0x020 6 138421987 --- Number of Write Commands +0x01 0x028 6 388598175 --- Logical Sectors Read +0x01 0x030 6 5400976 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 64GB/7B06EE5BF19B b/SSD/China/SSD/SSD 64GB/7B06EE5BF19B new file mode 100644 index 000000000..575526041 --- /dev/null +++ b/SSD/China/SSD/SSD 64GB/7B06EE5BF19B @@ -0,0 +1,159 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 64GB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 2 23:05:19 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 16 + 12 Power_Cycle_Count -O--CK 100 100 050 - 82 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 1153 +165 Unknown_Attribute -O--CK 100 100 050 - 11 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 3 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 38 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 2817 +242 Total_LBAs_Read ----CK 100 100 050 - 2807 +245 Unknown_Attribute -O--CK 100 100 050 - 1651 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 15/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 82 --- Lifetime Power-On Resets +0x01 0x010 4 16 --- Power-on Hours +0x01 0x018 6 184653469 --- Logical Sectors Written +0x01 0x020 6 2237549 --- Number of Write Commands +0x01 0x028 6 184005808 --- Logical Sectors Read +0x01 0x030 6 2183578 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 64GB/92D306F251D8 b/SSD/China/SSD/SSD 64GB/92D306F251D8 new file mode 100644 index 000000000..976f18d87 --- /dev/null +++ b/SSD/China/SSD/SSD 64GB/92D306F251D8 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 64GB +Serial Number: -- +Firmware Version: W1120A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 17 10:25:40 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 15 + 12 Power_Cycle_Count -O--CK 100 100 050 - 84 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 1478 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 75 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1225 +242 Total_LBAs_Read ----CK 100 100 050 - 2139 +245 Unknown_Attribute -O--CK 100 100 050 - 636 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 33/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 84 --- Lifetime Power-On Resets +0x01 0x010 4 15 --- Power-on Hours +0x01 0x018 6 80317946 --- Logical Sectors Written +0x01 0x020 6 155660 --- Number of Write Commands +0x01 0x028 6 140201805 --- Logical Sectors Read +0x01 0x030 6 1314118 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 64GB/952A003D42FD b/SSD/China/SSD/SSD 64GB/952A003D42FD new file mode 100644 index 000000000..884565b99 --- /dev/null +++ b/SSD/China/SSD/SSD 64GB/952A003D42FD @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 64GB +Serial Number: -- +Firmware Version: X0222A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 4 20:15:44 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 32 + 12 Power_Cycle_Count -O--CK 100 100 050 - 26 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 1266 +165 Unknown_Attribute -O--CK 100 100 050 - 4 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 17 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1699 +242 Total_LBAs_Read ----CK 100 100 050 - 2094 +245 Unknown_Attribute -O--CK 100 100 050 - 1069 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 17/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 32 --- Power-on Hours +0x01 0x018 6 111355096 --- Logical Sectors Written +0x01 0x020 6 737081 --- Number of Write Commands +0x01 0x028 6 137290744 --- Logical Sectors Read +0x01 0x030 6 1213523 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD 64GB/E5E8936E2570 b/SSD/China/SSD/SSD 64GB/E5E8936E2570 new file mode 100644 index 000000000..431332d79 --- /dev/null +++ b/SSD/China/SSD/SSD 64GB/E5E8936E2570 @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 64GB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jul 17 08:13:13 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 902 + 12 Power_Cycle_Count -O--CK 100 100 050 - 44 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 16 +164 Unknown_Attribute -O--CK 100 100 050 - 7117 +165 Unknown_Attribute -O--CK 100 100 050 - 30 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 16 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 32 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 17039 +242 Total_LBAs_Read ----CK 100 100 050 - 2170 +245 Unknown_Attribute -O--CK 100 100 050 - 12325 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 34/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x010 4 902 --- Power-on Hours +0x01 0x018 6 1116715107 --- Logical Sectors Written +0x01 0x020 6 24758162 --- Number of Write Commands +0x01 0x028 6 142251309 --- Logical Sectors Read +0x01 0x030 6 446881 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/SSD/SSD-240G/57F0F65A9132 b/SSD/China/SSD/SSD-240G/57F0F65A9132 new file mode 100644 index 000000000..b79e83d09 --- /dev/null +++ b/SSD/China/SSD/SSD-240G/57F0F65A9132 @@ -0,0 +1,183 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD-240G +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H230222a +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 22 02:38:22 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2281 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1675 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 1376290 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 811761467583 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 35 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 1031 +194 Temperature_Celsius -O---K 040 040 000 - 40 (Min/Max 10/50) +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 189 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 193 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 191 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 129 +211 Unknown_Attribute -O--CK 200 200 000 - 84 +231 Unknown_SSD_Attribute PO---K 088 088 005 - 12 +241 Total_LBAs_Written -O--CK 100 100 000 - 8483 +242 Total_LBAs_Read -O--CK 100 100 000 - 7131 +245 Unknown_Attribute -O--CK 100 100 000 - 3522613750 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2013 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: ?/40 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (319) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1675 --- Lifetime Power-On Resets +0x01 0x010 4 2281 --- Power-on Hours +0x01 0x018 6 17790461511 --- Logical Sectors Written +0x01 0x020 6 170008518 --- Number of Write Commands +0x01 0x028 6 14955171808 --- Logical Sectors Read +0x01 0x030 6 129256047 --- Number of Read Commands +0x01 0x038 6 2104149286748 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 25 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSD/SSD128GB/3C8DB033B3DB b/SSD/China/SSD/SSD128GB/3C8DB033B3DB new file mode 100644 index 000000000..b1c126068 --- /dev/null +++ b/SSD/China/SSD/SSD128GB/3C8DB033B3DB @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD128GB +Serial Number: -- +Firmware Version: V1220B0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 27 18:55:32 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5869 + 12 Power_Cycle_Count -O--CK 100 100 050 - 7284 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 17675 +165 Unknown_Attribute -O--CK 100 100 050 - 35 +166 Unknown_Attribute -O--CK 100 100 050 - 12 +167 Unknown_Attribute -O--CK 100 100 050 - 26 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 7056 +194 Temperature_Celsius -O---K 100 100 050 - 38 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 36138 +242 Total_LBAs_Read ----CK 100 100 050 - 77758 +245 Unknown_Attribute -O--CK 100 100 050 - 21987 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 38/38 Celsius +Lifetime Min/Max Temperature: 24/59 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7284 --- Lifetime Power-On Resets +0x01 0x010 4 5869 --- Power-on Hours +0x01 0x018 6 2368372825 --- Logical Sectors Written +0x01 0x020 6 26249095 --- Number of Write Commands +0x01 0x028 6 800994837 --- Logical Sectors Read +0x01 0x030 6 36849939 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/China/SSE064/SSE064GMLCC-SBC-2S/15DEE745B605 b/SSD/China/SSE064/SSE064GMLCC-SBC-2S/15DEE745B605 new file mode 100644 index 000000000..e9fae80fd --- /dev/null +++ b/SSD/China/SSE064/SSE064GMLCC-SBC-2S/15DEE745B605 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSE064GMLCC-SBC-2S +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 9 15:33:24 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5 + 12 Power_Cycle_Count -O--C- 100 100 000 - 14 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 083 083 010 - 29 +173 Unknown_Attribute -O--C- 100 100 000 - 65538 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 27 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 57627769 --- Logical Sectors Written +0x01 0x028 6 14593688 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSE128/SSE128GMLCT-SBC-2S/6F56151FCD8E b/SSD/China/SSE128/SSE128GMLCT-SBC-2S/6F56151FCD8E new file mode 100644 index 000000000..9fdb4d8a6 --- /dev/null +++ b/SSD/China/SSE128/SSE128GMLCT-SBC-2S/6F56151FCD8E @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSE128GMLCT-SBC-2S +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 25 11:24:01 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 18354 + 12 Power_Cycle_Count -O--C- 100 100 000 - 73 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 36 +173 Unknown_Attribute -O--C- 100 100 000 - 9437335 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 66 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 85 +241 Total_LBAs_Written -O--C- 100 100 000 - 6188 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 18354 --- Power-on Hours +0x01 0x018 6 12977605068 --- Logical Sectors Written +0x01 0x028 6 200940919 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE032/YSE032GTLCG-SBA-1/48A3D3B81DEB b/SSD/China/YSE032/YSE032GTLCG-SBA-1/48A3D3B81DEB new file mode 100644 index 000000000..46264f570 --- /dev/null +++ b/SSD/China/YSE032/YSE032GTLCG-SBA-1/48A3D3B81DEB @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE032GTLCG-SBA-1 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 31 05:25:53 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 11477 + 12 Power_Cycle_Count -O--C- 100 100 000 - 29 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 15 +173 Unknown_Attribute -O--C- 100 100 000 - 22741367 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 88 +241 Total_LBAs_Written -O--C- 100 100 000 - 15389 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 11477 --- Power-on Hours +0x01 0x018 6 32273754991 --- Logical Sectors Written +0x01 0x028 6 372422913 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 123 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE032/YSE032GTLCG-SBA-1/D0644BE5E644 b/SSD/China/YSE032/YSE032GTLCG-SBA-1/D0644BE5E644 new file mode 100644 index 000000000..d6acd4c92 --- /dev/null +++ b/SSD/China/YSE032/YSE032GTLCG-SBA-1/D0644BE5E644 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE032GTLCG-SBA-1 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 28 11:33:26 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9164 + 12 Power_Cycle_Count -O--C- 100 100 000 - 61 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 7 +173 Unknown_Attribute -O--C- 100 100 000 - 6357110 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 55 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 96 +241 Total_LBAs_Written -O--C- 100 100 000 - 962 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 61 --- Lifetime Power-On Resets +0x01 0x010 4 9164 --- Power-on Hours +0x01 0x018 6 2017590988 --- Logical Sectors Written +0x01 0x028 6 2105179752 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 94 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/4A2308A2862D b/SSD/China/YSE128/YSE128GTLCW-SBC-2/4A2308A2862D new file mode 100644 index 000000000..e63292126 --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/4A2308A2862D @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 15 17:55:22 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 384 + 12 Power_Cycle_Count -O--C- 100 100 000 - 11 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 13 +173 Unknown_Attribute -O--C- 100 100 000 - 65539 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 4 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 151 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 384 --- Power-on Hours +0x01 0x018 6 317415737 --- Logical Sectors Written +0x01 0x028 6 59440085 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 66 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/4C0FD3F596C6 b/SSD/China/YSE128/YSE128GTLCW-SBC-2/4C0FD3F596C6 new file mode 100644 index 000000000..12556089e --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/4C0FD3F596C6 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 16 23:25:19 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1598 + 12 Power_Cycle_Count -O--C- 100 100 000 - 9 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 20 +173 Unknown_Attribute -O--C- 100 100 000 - 262155 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 5 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 359 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 1598 --- Power-on Hours +0x01 0x018 6 754693459 --- Logical Sectors Written +0x01 0x028 6 15930338 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 33 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/7FDF51197545 b/SSD/China/YSE128/YSE128GTLCW-SBC-2/7FDF51197545 new file mode 100644 index 000000000..4af4d0131 --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/7FDF51197545 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 2 18:34:19 2026 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20592 + 12 Power_Cycle_Count -O--C- 100 100 000 - 39 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 23 +173 Unknown_Attribute -O--C- 100 100 000 - 31719941 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 32 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 83 +241 Total_LBAs_Written -O--C- 100 100 000 - 20422 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 39 --- Lifetime Power-On Resets +0x01 0x010 4 20592 --- Power-on Hours +0x01 0x018 6 42829131476 --- Logical Sectors Written +0x01 0x028 6 188844019 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 197 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/A0A57964BDF6 b/SSD/China/YSE128/YSE128GTLCW-SBC-2/A0A57964BDF6 new file mode 100644 index 000000000..06a8431f6 --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/A0A57964BDF6 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 07:34:53 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 620 + 12 Power_Cycle_Count -O--C- 100 100 000 - 31 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 21 +173 Unknown_Attribute -O--C- 100 100 000 - 65538 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 16 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 122 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 620 --- Power-on Hours +0x01 0x018 6 257489015 --- Logical Sectors Written +0x01 0x028 6 47418221 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 153 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/C32771AC0177 b/SSD/China/YSE128/YSE128GTLCW-SBC-2/C32771AC0177 new file mode 100644 index 000000000..146aea395 --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/C32771AC0177 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 30 18:43:21 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 3234 + 12 Power_Cycle_Count -O--C- 100 100 000 - 13 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 20 +173 Unknown_Attribute -O--C- 100 100 000 - 2555978 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 10 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 98 +241 Total_LBAs_Written -O--C- 100 100 000 - 2820 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 3234 --- Power-on Hours +0x01 0x018 6 5916053583 --- Logical Sectors Written +0x01 0x028 6 4040225 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 36 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/C5D3C4184784 b/SSD/China/YSE128/YSE128GTLCW-SBC-2/C5D3C4184784 new file mode 100644 index 000000000..55bf2dda0 --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/C5D3C4184784 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 27 12:06:09 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 10686 + 12 Power_Cycle_Count -O--C- 100 100 000 - 9 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 12 +173 Unknown_Attribute -O--C- 100 100 000 - 6029430 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 7 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 96 +241 Total_LBAs_Written -O--C- 100 100 000 - 5535 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 10686 --- Power-on Hours +0x01 0x018 6 11608734876 --- Logical Sectors Written +0x01 0x028 6 67598550 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 101 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE128/YSE128GTLCW-SBC-2/F1BF1BCB110E b/SSD/China/YSE128/YSE128GTLCW-SBC-2/F1BF1BCB110E new file mode 100644 index 000000000..4613c1d1d --- /dev/null +++ b/SSD/China/YSE128/YSE128GTLCW-SBC-2/F1BF1BCB110E @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE128GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Nov 26 18:29:56 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 12152 + 12 Power_Cycle_Count -O--C- 100 100 000 - 49 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 46 +173 Unknown_Attribute -O--C- 100 100 000 - 2752580 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 41 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 98 +241 Total_LBAs_Written -O--C- 100 100 000 - 4883 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 12152 --- Power-on Hours +0x01 0x018 6 10240705239 --- Logical Sectors Written +0x01 0x028 6 487630777 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 194 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE256/YSE256GTLCW-SBC-2/84FD49D6D937 b/SSD/China/YSE256/YSE256GTLCW-SBC-2/84FD49D6D937 new file mode 100644 index 000000000..349416e1e --- /dev/null +++ b/SSD/China/YSE256/YSE256GTLCW-SBC-2/84FD49D6D937 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE256GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 11:01:34 2025 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1033 + 12 Power_Cycle_Count -O--C- 100 100 000 - 88 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 28 +173 Unknown_Attribute -O--C- 100 100 000 - 1179718 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 81 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 2546 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 88 --- Lifetime Power-On Resets +0x01 0x010 4 1033 --- Power-on Hours +0x01 0x018 6 5341205145 --- Logical Sectors Written +0x01 0x028 6 31159879 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 122 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/YSE512/YSE512GTLCW-SBC-2/5C5497CD46EE b/SSD/China/YSE512/YSE512GTLCW-SBC-2/5C5497CD46EE new file mode 100644 index 000000000..c52a39424 --- /dev/null +++ b/SSD/China/YSE512/YSE512GTLCW-SBC-2/5C5497CD46EE @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: YSE512GTLCW-SBC-2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 17 22:32:35 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2983 + 12 Power_Cycle_Count -O--C- 100 100 000 - 72 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 182 +173 Unknown_Attribute -O--C- 100 100 000 - 131076 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 59 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 942 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 72 --- Lifetime Power-On Resets +0x01 0x010 4 2983 --- Power-on Hours +0x01 0x018 6 1977494175 --- Logical Sectors Written +0x01 0x028 6 42411266 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 216 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/mSATA/mSATA SSD/E606F362E2DA b/SSD/China/mSATA/mSATA SSD/E606F362E2DA new file mode 100644 index 000000000..e02fd37e9 --- /dev/null +++ b/SSD/China/mSATA/mSATA SSD/E606F362E2DA @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: mSATA SSD +Serial Number: -- +Firmware Version: X0220A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 8 15:20:41 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 18 + 12 Power_Cycle_Count -O--CK 100 100 050 - 20 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 102 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 11 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 804 +242 Total_LBAs_Read ----CK 100 100 050 - 427 +245 Unknown_Attribute -O--CK 100 100 050 - 18 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 18/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 18 --- Power-on Hours +0x01 0x018 6 52751525 --- Logical Sectors Written +0x01 0x020 6 252100 --- Number of Write Commands +0x01 0x028 6 27996801 --- Logical Sectors Read +0x01 0x030 6 472726 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 42 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Colorful/CF500/CF500 256GB/E3337044FD11 b/SSD/Colorful/CF500/CF500 256GB/E3337044FD11 new file mode 100644 index 000000000..dd51f7ec2 --- /dev/null +++ b/SSD/Colorful/CF500/CF500 256GB/E3337044FD11 @@ -0,0 +1,164 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CF500 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R840H +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 5 16:36:18 2025 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 725 + 12 Power_Cycle_Count -O--CK 100 100 000 - 785 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 5430 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 22 +166 Unknown_Attribute -O--CK 100 100 000 - 15 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 188 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 16795045 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 7 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 37 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 3457 +242 Total_LBAs_Read -O--CK 100 100 000 - 2573 +249 Unknown_Attribute -O--CK 100 100 000 - 2071 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 3797 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 785 --- Lifetime Power-On Resets +0x01 0x010 4 725 --- Power-on Hours +0x01 0x018 6 7251649681 --- Logical Sectors Written +0x01 0x020 6 94637312 --- Number of Write Commands +0x01 0x028 6 5396529993 --- Logical Sectors Read +0x01 0x030 6 68990204 --- Number of Read Commands +0x01 0x038 6 2610717321 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3186 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Colorful/SL300/SL300 128GB/554DB06517B5 b/SSD/Colorful/SL300/SL300 128GB/554DB06517B5 new file mode 100644 index 000000000..01418c0db --- /dev/null +++ b/SSD/Colorful/SL300/SL300 128GB/554DB06517B5 @@ -0,0 +1,148 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Colorful SL300 128GB +Serial Number: -- +Firmware Version: U0115A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 11 14:21:05 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2934 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1031 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 15753 +165 Unknown_Attribute -O--CK 100 100 050 - 97 +166 Unknown_Attribute -O--CK 100 100 050 - 8 +167 Unknown_Attribute -O--CK 100 100 050 - 68 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 198 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 105306 +242 Total_LBAs_Read ----CK 100 100 050 - 116741 +245 Unknown_Attribute -O--CK 100 100 050 - 69833 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1031 --- Lifetime Power-On Resets +0x01 0x010 4 2934 --- Power-on Hours +0x01 0x018 6 2606422538 --- Logical Sectors Written +0x01 0x020 6 125570231 --- Number of Write Commands +0x01 0x028 6 3355799789 --- Logical Sectors Read +0x01 0x030 6 129307284 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 34 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Corsair/FORCE LX SSD/FORCE LX SSD 512GB/872E764D2DFC b/SSD/Corsair/FORCE LX SSD/FORCE LX SSD 512GB/872E764D2DFC new file mode 100644 index 000000000..2fb19f82e --- /dev/null +++ b/SSD/Corsair/FORCE LX SSD/FORCE LX SSD 512GB/872E764D2DFC @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CORSAIR FORCE LX SSD +Serial Number: -- +Firmware Version: N0402C +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 2 01:36:03 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 1896 + 12 Power_Cycle_Count ------ 100 100 000 - 134 +192 Power-Off_Retract_Count ------ 100 100 000 - 22 +194 Temperature_Celsius ------ 100 100 000 - 33 +195 Hardware_ECC_Recovered ------ 100 100 000 - 165 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 45 +163 Initial_Bad_Block_Count ------ 100 100 000 - 1 +164 Total_Erase_Count ------ 100 100 000 - 172219 +165 Max_Erase_Count ------ 100 100 000 - 205 +166 Min_Erase_Count ------ 100 100 000 - 103 +167 Average_Erase_Count ------ 100 100 000 - 169 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 97 +232 Available_Reservd_Space ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 306 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +187 Reported_Uncorrect ------ 100 100 000 - 0 +225 Host_Writes_32MiB ------ 100 100 000 - 1723885 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +241 Host_Writes_32MiB ------ 100 100 000 - 1723885 +242 Host_Reads_32MiB ------ 100 100 000 - 240323 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Invalid Self-test Log index = 0x006e (reserved = 0x00) +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 134 --- Lifetime Power-On Resets +0x01 0x010 4 1896 --- Power-on Hours +0x01 0x018 6 1307403364 --- Logical Sectors Written +0x01 0x020 6 3539855290 --- Number of Write Commands +0x01 0x028 6 2864909618 --- Logical Sectors Read +0x01 0x030 6 144890650 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 22 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 337 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Corsair/FORCE LX SSD/FORCE LX SSD 512GB/885B6D3353A2 b/SSD/Corsair/FORCE LX SSD/FORCE LX SSD 512GB/885B6D3353A2 new file mode 100644 index 000000000..7ee27d42e --- /dev/null +++ b/SSD/Corsair/FORCE LX SSD/FORCE LX SSD 512GB/885B6D3353A2 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CORSAIR FORCE LX SSD +Serial Number: -- +Firmware Version: N0402C +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 2 01:36:03 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 1911 + 12 Power_Cycle_Count ------ 100 100 000 - 151 +192 Power-Off_Retract_Count ------ 100 100 000 - 20 +194 Temperature_Celsius ------ 100 100 000 - 35 +195 Hardware_ECC_Recovered ------ 100 100 000 - 160 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 3 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 45 +163 Initial_Bad_Block_Count ------ 100 100 000 - 1 +164 Total_Erase_Count ------ 100 100 000 - 173529 +165 Max_Erase_Count ------ 100 100 000 - 206 +166 Min_Erase_Count ------ 100 100 000 - 104 +167 Average_Erase_Count ------ 100 100 000 - 170 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 97 +232 Available_Reservd_Space ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 323 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +187 Reported_Uncorrect ------ 100 100 000 - 0 +225 Host_Writes_32MiB ------ 100 100 000 - 1726711 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +241 Host_Writes_32MiB ------ 100 100 000 - 1726711 +242 Host_Reads_32MiB ------ 100 100 000 - 235775 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Invalid Self-test Log index = 0x00ec (reserved = 0x00) +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 151 --- Lifetime Power-On Resets +0x01 0x010 4 1911 --- Power-on Hours +0x01 0x018 6 1492595454 --- Logical Sectors Written +0x01 0x020 6 3509916379 --- Number of Write Commands +0x01 0x028 6 2566852528 --- Logical Sectors Read +0x01 0x030 6 144795761 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 20 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 308 --- Number of Hardware Resets +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Corsair/Force 3/Force 3 SSD 120GB/A1F49F90B809 b/SSD/Corsair/Force 3/Force 3 SSD 120GB/A1F49F90B809 new file mode 100644 index 000000000..2d71adac9 --- /dev/null +++ b/SSD/Corsair/Force 3/Force 3 SSD 120GB/A1F49F90B809 @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: Corsair Force 3 SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 5.02 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 8 19:45:31 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 65675h+18m+39.860s + 12 Power_Cycle_Count -O--CK 088 088 000 - 12640 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 618 +177 Wear_Range_Delta ------ 000 000 000 - 14 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 128 129 000 - 128 (0 127 0 129 0) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 093 093 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 45812 +234 SandForce_Internal -O--CK 000 000 000 - 35064 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 35064 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 23099 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Self-test routine in progress 30% 49607 - +# 2 Short offline Self-test routine in progress 30% 49607 - +# 3 Short offline Self-test routine in progress 60% 49607 - +# 4 Short offline Self-test routine in progress 80% 49607 - +# 5 Short offline Self-test routine in progress 80% 49607 - +# 6 Short offline Self-test routine in progress 10% 49607 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (226) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Corsair/Force 3/Force 3 SSD 64GB/A4FEDCAC81F7 b/SSD/Corsair/Force 3/Force 3 SSD 64GB/A4FEDCAC81F7 new file mode 100644 index 000000000..73c824e9d --- /dev/null +++ b/SSD/Corsair/Force 3/Force 3 SSD 64GB/A4FEDCAC81F7 @@ -0,0 +1,165 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: Corsair Force 3 SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 5.02 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 3 05:48:57 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 5961h+08m+50.820s + 12 Power_Cycle_Count -O--CK 100 100 000 - 530 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 165 +177 Wear_Range_Delta ------ 000 000 000 - 2 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 128 129 000 - 128 (0 127 0 129 0) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 1053 +234 SandForce_Internal -O--CK 000 000 000 - 2070 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 2070 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 142 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (18) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Corsair/Force 3/Force 3 SSD 90GB/246C1E84B0F7 b/SSD/Corsair/Force 3/Force 3 SSD 90GB/246C1E84B0F7 new file mode 100644 index 000000000..e79ad6442 --- /dev/null +++ b/SSD/Corsair/Force 3/Force 3 SSD 90GB/246C1E84B0F7 @@ -0,0 +1,164 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: Corsair Force 3 SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 1.3.3 +User Capacity: 90,028,302,336 bytes [90.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 12 14:25:43 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 090 090 050 - 0/2528782 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 782h+07m+47.910s + 12 Power_Cycle_Count -O--CK 100 100 000 - 216 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 38 +177 Wear_Range_Delta ------ 000 000 000 - 0 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/2528782 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/2528782 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/2528782 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 531 +234 SandForce_Internal -O--CK 000 000 000 - 799 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 799 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 770 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 32 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Corsair/Force GS/Force GS 128GB/2CA45F4806A7 b/SSD/Corsair/Force GS/Force GS 128GB/2CA45F4806A7 new file mode 100644 index 000000000..91d01a85a --- /dev/null +++ b/SSD/Corsair/Force GS/Force GS 128GB/2CA45F4806A7 @@ -0,0 +1,198 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: Corsair Force GS +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 5.41 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 7 17:43:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 095 095 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 083 083 000 - 15266h+53m+52.980s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1317 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 265 +177 Wear_Range_Delta ------ 000 000 000 - 98 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 028 059 000 - 28 (Min/Max 2/59) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal -O--CK 000 000 000 - 18575 +234 SandForce_Internal -O--CK 000 000 000 - 9552 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 9552 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 12700 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 2/59 Celsius +Lifetime Min/Max Temperature: 2/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (373) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1317 --- Lifetime Power-On Resets +0x01 0x010 4 15266 --- Power-on Hours +0x01 0x018 6 20033254442 --- Logical Sectors Written +0x01 0x028 6 26635076819 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 9 --- Lowest Average Short Term Temperature +0x05 0x040 1 28 --- Highest Average Long Term Temperature +0x05 0x048 1 13 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1 --- Number of Hardware Resets +0x06 0x010 4 5057 --- Number of ASR Events +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 17 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Corsair/Force GT/Force GT 90GB/AD3D86ECE937 b/SSD/Corsair/Force GT/Force GT 90GB/AD3D86ECE937 new file mode 100644 index 000000000..3ed0e812a --- /dev/null +++ b/SSD/Corsair/Force GT/Force GT 90GB/AD3D86ECE937 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: Corsair Force GT +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 5.03 +User Capacity: 90,028,302,336 bytes [90.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 28 21:00:28 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 114 050 - 0/93897288 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 5595h+18m+21.790s + 12 Power_Cycle_Count -O--CK 092 092 000 - 8645 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 58 +177 Wear_Range_Delta ------ 000 000 000 - 3 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 041 055 000 - 41 (Min/Max 15/55) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/93897288 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/93897288 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/93897288 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 11274 +234 SandForce_Internal -O--CK 000 000 000 - 11668 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 11668 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 17206 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 36/41 Celsius +Lifetime Min/Max Temperature: 15/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (18) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Crucial/C300/C300-CTFDDAC128MAG/7479F19B0657 b/SSD/Crucial/C300/C300-CTFDDAC128MAG/7479F19B0657 new file mode 100644 index 000000000..37db7735b --- /dev/null +++ b/SSD/Crucial/C300/C300-CTFDDAC128MAG/7479F19B0657 @@ -0,0 +1,197 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD C300/P300 +Device Model: C300-CTFDDAC128MAG +Serial Number: -- +LU WWN Device Id: 5 07500a ... +Firmware Version: 0001 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 6 +Local Time is: Thu Apr 17 14:58:45 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 11) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 9 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 5 + 9 Power_On_Hours -O--CK 100 100 000 - 15556 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1822 +170 Grown_Failing_Block_Ct -O--CK 100 100 000 - 5 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Wear_Leveling_Count -O--CK 100 100 000 - 312 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 0 +181 Non4k_Aligned_Access P---C- 058 001 000 - 1273 316 956 +183 SATA_Iface_Downshift -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 000 - 285 +194 Temperature_Celsius -O--C- 100 100 000 - 128 (0 0 255 255 255) +195 Hardware_ECC_Recovered ---RCK 100 100 000 - 363 +196 Reallocated_Event_Count -O--CK 100 100 000 - 5 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Used ---RC- 058 058 000 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 3449 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 32 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log size 3449 not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (472) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1822 --- Lifetime Power-On Resets +0x01 0x010 4 15556 --- Power-on Hours +0x01 0x018 6 10361781947 --- Logical Sectors Written +0x01 0x020 6 155053635 --- Number of Write Commands +0x01 0x028 6 9941541292 --- Logical Sectors Read +0x01 0x030 6 198362764 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -128 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 - --- Highest Temperature +0x05 0x028 1 - --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8703 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 34 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/C300/C300-CTFDDAC128MAG/D56A2CA21B6F b/SSD/Crucial/C300/C300-CTFDDAC128MAG/D56A2CA21B6F new file mode 100644 index 000000000..b70356980 --- /dev/null +++ b/SSD/Crucial/C300/C300-CTFDDAC128MAG/D56A2CA21B6F @@ -0,0 +1,198 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD C300/P300 +Device Model: C300-CTFDDAC128MAG +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 0007 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 8 18:54:05 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 595) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 709 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 32768 + 9 Power_On_Hours -O--CK 100 100 000 - 68101 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4343 +170 Grown_Failing_Block_Ct PO--CK 100 100 000 - 16 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Wear_Leveling_Count PO--CK 090 090 000 - 502 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2 +181 Non4k_Aligned_Access -O---K 100 100 000 - 5720 4024 1696 +183 SATA_Iface_Downshift -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 709 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 000 - 169 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 16 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 +202 Percent_Lifetime_Used ---RC- 090 090 000 - 10 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 3449 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 1741 Device vendor specific log +0xa0 SL VS 205 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log size 3449 not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (341) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4343 --- Lifetime Power-On Resets +0x01 0x010 4 68101 --- Power-on Hours +0x01 0x018 6 50045992560 --- Logical Sectors Written +0x01 0x020 6 1754266556 --- Number of Write Commands +0x01 0x028 6 36725520144 --- Logical Sectors Read +0x01 0x030 6 732470988 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 709 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -128 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 - --- Highest Temperature +0x05 0x028 1 - --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 17542 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT1000/CT1000BX500SSD1/4DCCE0E98F7B b/SSD/Crucial/CT1000/CT1000BX500SSD1/4DCCE0E98F7B new file mode 100644 index 000000000..68073eec9 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000BX500SSD1/4DCCE0E98F7B @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 19 00:48:34 2025 ACST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1226 + 12 Power_Cycle_Count -O--CK 100 100 000 - 68 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 61 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 43 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 59 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 052 000 - 32 (Min/Max 24/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 0 +247 Host_Program_Page_Count -O--CK 100 100 000 - 0 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 0 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 20312469 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT1000/CT1000BX500SSD1/68D45E8F0892 b/SSD/Crucial/CT1000/CT1000BX500SSD1/68D45E8F0892 new file mode 100644 index 000000000..d79dfce58 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000BX500SSD1/68D45E8F0892 @@ -0,0 +1,133 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR054 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 26 15:55:31 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 16821 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 091 091 000 - 99 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 12 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 44 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 074 064 000 - 26 (Min/Max 25/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 091 091 001 - 9 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 121647722266 +247 Host_Program_Page_Count -O--CK 100 100 000 - 3801491320 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3414208512 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 930430251 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 14 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT1000/CT1000BX500SSD1/9212EAEEEBF8 b/SSD/Crucial/CT1000/CT1000BX500SSD1/9212EAEEEBF8 new file mode 100644 index 000000000..c8fecdb35 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000BX500SSD1/9212EAEEEBF8 @@ -0,0 +1,130 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 26 19:02:46 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 14 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 072 070 000 - 28 (Min/Max 25/30) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 519841666 +247 Host_Program_Page_Count -O--CK 100 100 000 - 16245052 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 10342128 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 181227316 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT1000/CT1000BX500SSD1/975CB0D34395 b/SSD/Crucial/CT1000/CT1000BX500SSD1/975CB0D34395 new file mode 100644 index 000000000..6e6007e45 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000BX500SSD1/975CB0D34395 @@ -0,0 +1,133 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 10 17:14:55 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1510 + 12 Power_Cycle_Count -O--CK 100 100 000 - 84 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 84 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 33 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 072 063 000 - 28 (Min/Max 24/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1319160970 +247 Host_Program_Page_Count -O--CK 100 100 000 - 41223780 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4730880 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 343634352 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT1000/CT1000BX500SSD1/B57ACA2FB09E b/SSD/Crucial/CT1000/CT1000BX500SSD1/B57ACA2FB09E new file mode 100644 index 000000000..224bf013b --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000BX500SSD1/B57ACA2FB09E @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Dec 21 17:24:30 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 379 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 45 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 054 000 - 42 (Min/Max 19/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 78384471 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2449514 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 0 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 18299325 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT1000/CT1000BX500SSD1/BCDA44C60A0E b/SSD/Crucial/CT1000/CT1000BX500SSD1/BCDA44C60A0E new file mode 100644 index 000000000..a51bd2a63 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000BX500SSD1/BCDA44C60A0E @@ -0,0 +1,130 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 6 23:06:12 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2323 + 12 Power_Cycle_Count -O--CK 100 100 000 - 61 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 6 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 8 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 6 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 056 056 000 - 44 (Min/Max 23/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 2619288879 +247 Host_Program_Page_Count -O--CK 100 100 000 - 81852777 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 35295264 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3009718879 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 5 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/0AEE7B6913E1 b/SSD/Crucial/CT1000/CT1000MX500SSD1/0AEE7B6913E1 new file mode 100644 index 000000000..ec713dfd8 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/0AEE7B6913E1 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 9 17:04:44 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 670 + 12 Power_Cycle_Count -O--CK 100 100 000 - 827 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 11 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 38 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 26 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 050 000 - 40 (Min/Max 0/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5778773806 +247 Host_Program_Page_Count -O--CK 100 100 000 - 50213430 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 45453359 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 29/40 Celsius +Lifetime Min/Max Temperature: 0/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (122) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 670 --- Power-on Hours +0x01 0x018 6 5778773806 --- Logical Sectors Written +0x01 0x020 6 58486436 --- Number of Write Commands +0x01 0x028 6 3389839200 --- Logical Sectors Read +0x01 0x030 6 45297970 --- Number of Read Commands +0x01 0x038 6 2415549218 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 38 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3799 --- Number of Hardware Resets +0x06 0x010 4 130 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/25589AEFCB15 b/SSD/Crucial/CT1000/CT1000MX500SSD1/25589AEFCB15 new file mode 100644 index 000000000..fb914c139 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/25589AEFCB15 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 09:36:59 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 32418 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25008 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 089 089 000 - 170 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 46 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 47 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 046 043 000 - 54 (Min/Max 0/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 089 089 001 - 11 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 9592954547 +247 Host_Program_Page_Count -O--CK 100 100 000 - 163138297 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 5501233076 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 54 Celsius +Power Cycle Min/Max Temperature: 28/54 Celsius +Lifetime Min/Max Temperature: 0/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (85) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25008 --- Lifetime Power-On Resets +0x01 0x010 4 32418 --- Power-on Hours +0x01 0x018 6 1003019955 --- Logical Sectors Written +0x01 0x020 6 234637747 --- Number of Write Commands +0x01 0x028 6 2087823874 --- Logical Sectors Read +0x01 0x030 6 69251891 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 46 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 54 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 48 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 46 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 61551 --- Number of Hardware Resets +0x06 0x010 4 96 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/4B182A8AB538 b/SSD/Crucial/CT1000/CT1000MX500SSD1/4B182A8AB538 new file mode 100644 index 000000000..640ff3c25 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/4B182A8AB538 @@ -0,0 +1,229 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 26 19:50:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9511 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9384 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 58 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 491 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 41 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 069 045 000 - 31 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 36929896152 +247 Host_Program_Page_Count -O--CK 100 100 000 - 607114255 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 582324222 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8836 - +# 2 Short offline Completed without error 00% 8835 - +# 3 Short offline Completed without error 00% 8821 - +# 4 Short offline Completed without error 00% 8344 - +# 5 Short offline Completed without error 00% 8810 - +# 6 Short offline Completed without error 00% 8804 - +# 7 Short offline Completed without error 00% 8801 - +# 8 Short offline Completed without error 00% 8791 - +# 9 Short offline Completed without error 00% 8779 - +#10 Short offline Completed without error 00% 8767 - +#11 Short offline Completed without error 00% 8592 - +#12 Short offline Completed without error 00% 8530 - +#13 Short offline Completed without error 00% 8519 - +#14 Short offline Completed without error 00% 8438 - +#15 Short offline Completed without error 00% 8420 - +#16 Extended offline Completed without error 00% 8401 - +#17 Short offline Completed without error 00% 8373 - +#18 Short offline Completed without error 00% 8365 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 24/31 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (43) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9384 --- Lifetime Power-On Resets +0x01 0x010 4 9511 --- Power-on Hours +0x01 0x018 6 2570157784 --- Logical Sectors Written +0x01 0x020 6 451667330 --- Number of Write Commands +0x01 0x028 6 2081126470 --- Logical Sectors Read +0x01 0x030 6 805155529 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 493 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 36 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 53359 --- Number of Hardware Resets +0x06 0x010 4 3748 --- Number of ASR Events +0x06 0x018 4 2 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/4C362BF6EBBA b/SSD/Crucial/CT1000/CT1000MX500SSD1/4C362BF6EBBA new file mode 100644 index 000000000..168070e54 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/4C362BF6EBBA @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR033 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 12 23:42:28 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7181 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2952 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 6 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 208 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 047 000 - 33 (Min/Max 0/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 3 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 6378557250 +247 Host_Program_Page_Count -O--CK 100 100 000 - 50296294 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 32492661 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 25/33 Celsius +Lifetime Min/Max Temperature: 0/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (74) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2952 --- Lifetime Power-On Resets +0x01 0x010 4 7181 --- Power-on Hours +0x01 0x018 6 2083589954 --- Logical Sectors Written +0x01 0x020 6 20240036 --- Number of Write Commands +0x01 0x028 6 3160312387 --- Logical Sectors Read +0x01 0x030 6 38275153 --- Number of Read Commands +0x01 0x038 6 81878058 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 208 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 53 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 53 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 22539 --- Number of Hardware Resets +0x06 0x010 4 8031 --- Number of ASR Events +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 24 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/4D3F6B36B4B0 b/SSD/Crucial/CT1000/CT1000MX500SSD1/4D3F6B36B4B0 new file mode 100644 index 000000000..b4a037c65 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/4D3F6B36B4B0 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 4 20:37:55 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 52415 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 69 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 48 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 052 030 000 - 48 (Min/Max 0/70) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 11748871025 +247 Host_Program_Page_Count -O--CK 100 100 000 - 213379558 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1793710289 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 35/68 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (99) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 52415 --- Power-on Hours +0x01 0x018 6 3158936433 --- Logical Sectors Written +0x01 0x020 6 178412479 --- Number of Write Commands +0x01 0x028 6 3450940080 --- Logical Sectors Read +0x01 0x030 6 2127069657 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 48 --- Current Temperature +0x05 0x010 1 48 --- Average Short Term Temperature +0x05 0x018 1 48 --- Average Long Term Temperature +0x05 0x020 1 70 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 60 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 48 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 46 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 90 --- Number of Hardware Resets +0x06 0x010 4 3 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 28 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/69DFA83FEFC2 b/SSD/Crucial/CT1000/CT1000MX500SSD1/69DFA83FEFC2 new file mode 100644 index 000000000..c67d63014 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/69DFA83FEFC2 @@ -0,0 +1,229 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 12 18:30:59 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 33346 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 025 025 000 - 1137 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 31 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 38 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 032 000 - 33 (Min/Max 0/68) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 025 025 001 - 75 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 228212445504 +247 Host_Program_Page_Count -O--CK 100 100 000 - 3980049715 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 31089188993 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 33265 - +# 2 Short offline Completed without error 00% 33239 - +# 3 Short offline Completed without error 00% 33212 - +# 4 Short offline Completed without error 00% 33185 - +# 5 Short offline Completed without error 00% 33158 - +# 6 Short offline Completed without error 00% 33132 - +# 7 Short offline Completed without error 00% 33105 - +# 8 Short offline Completed without error 00% 33078 - +# 9 Short offline Completed without error 00% 33051 - +#10 Short offline Completed without error 00% 33024 - +#11 Short offline Completed without error 00% 32982 - +#12 Short offline Completed without error 00% 32955 - +#13 Short offline Completed without error 00% 32928 - +#14 Short offline Completed without error 00% 32901 - +#15 Short offline Completed without error 00% 32874 - +#16 Short offline Completed without error 00% 32847 - +#17 Short offline Completed without error 00% 32821 - +#18 Short offline Completed without error 00% 32794 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/35 Celsius +Lifetime Min/Max Temperature: 0/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (37) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x010 4 33346 --- Power-on Hours +0x01 0x018 6 579178816 --- Logical Sectors Written +0x01 0x020 6 3422847614 --- Number of Write Commands +0x01 0x028 6 1569280407 --- Logical Sectors Read +0x01 0x030 6 1515453103 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 31 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 68 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 41 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 565 --- Number of Hardware Resets +0x06 0x010 4 9 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 75 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/759F3B2C4687 b/SSD/Crucial/CT1000/CT1000MX500SSD1/759F3B2C4687 new file mode 100644 index 000000000..07bfb4a85 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/759F3B2C4687 @@ -0,0 +1,213 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 3 07:19:12 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6060 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1085 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 10 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 168 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 55 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 51 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 076 058 000 - 24 (Min/Max 0/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 7305118952 +247 Host_Program_Page_Count -O--CK 100 100 000 - 63191695 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 36283570 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3975 - +# 2 Short offline Completed without error 00% 3935 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 17/24 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1085 --- Lifetime Power-On Resets +0x01 0x010 4 6060 --- Power-on Hours +0x01 0x018 6 3010151656 --- Logical Sectors Written +0x01 0x020 6 37638593 --- Number of Write Commands +0x01 0x028 6 3907318522 --- Logical Sectors Read +0x01 0x030 6 318988308 --- Number of Read Commands +0x01 0x038 6 343784904 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 168 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 29 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 28 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14036 --- Number of Hardware Resets +0x06 0x010 4 1939 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/887D6192E45A b/SSD/Crucial/CT1000/CT1000MX500SSD1/887D6192E45A new file mode 100644 index 000000000..129769e21 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/887D6192E45A @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 29 15:46:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3081 + 12 Power_Cycle_Count -O--CK 100 100 000 - 617 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 26 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 291 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 66 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 061 049 000 - 39 (Min/Max 0/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 731 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 14303192871 +247 Host_Program_Page_Count -O--CK 100 100 000 - 122482018 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 81771038 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 25/40 Celsius +Lifetime Min/Max Temperature: 0/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (27) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 617 --- Lifetime Power-On Resets +0x01 0x010 4 3081 --- Power-on Hours +0x01 0x018 6 14303192871 --- Logical Sectors Written +0x01 0x020 6 106868438 --- Number of Write Commands +0x01 0x028 6 8390092837 --- Logical Sectors Read +0x01 0x030 6 93988079 --- Number of Read Commands +0x01 0x038 6 2502941810 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1021 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6598 --- Number of Hardware Resets +0x06 0x010 4 422 --- Number of ASR Events +0x06 0x018 4 731 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/99B01BE53524 b/SSD/Crucial/CT1000/CT1000MX500SSD1/99B01BE53524 new file mode 100644 index 000000000..9fb62c762 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/99B01BE53524 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 02:44:21 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown (0xc200) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7093 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2588 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 068 068 000 - 493 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 466 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 48 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 243 000 - 33 (Min/Max 0/113) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 068 068 001 - 32 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 252657067250 +247 Host_Program_Page_Count -O--CK 100 100 000 - 6585248802 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 6366808086 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/35 Celsius +Lifetime Min/Max Temperature: 0/113 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (55) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2588 --- Lifetime Power-On Resets +0x01 0x010 4 7093 --- Power-on Hours +0x01 0x018 6 3548964082 --- Logical Sectors Written +0x01 0x020 6 2542526785 --- Number of Write Commands +0x01 0x028 6 821594865 --- Logical Sectors Read +0x01 0x030 6 759499768 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 468 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 113 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 32 --- Lowest Average Short Term Temperature +0x05 0x040 1 49 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 39 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 17871 --- Number of Hardware Resets +0x06 0x010 4 4808 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 32 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/A95E44C30093 b/SSD/Crucial/CT1000/CT1000MX500SSD1/A95E44C30093 new file mode 100644 index 000000000..7cfd4168d --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/A95E44C30093 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR033 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 15 23:26:12 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 485 + 12 Power_Cycle_Count -O--CK 100 100 000 - 215 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 24 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 7 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 063 032 000 - 37 (Min/Max 0/68) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 14444626510 +247 Host_Program_Page_Count -O--CK 100 100 000 - 123779392 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 131199816 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 29/57 Celsius +Lifetime Min/Max Temperature: 0/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (115) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 215 --- Lifetime Power-On Resets +0x01 0x010 4 485 --- Power-on Hours +0x01 0x018 6 1559724622 --- Logical Sectors Written +0x01 0x020 6 240895632 --- Number of Write Commands +0x01 0x028 6 2268644349 --- Logical Sectors Read +0x01 0x030 6 140111512 --- Number of Read Commands +0x01 0x038 6 1747787509 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 68 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1386 --- Number of Hardware Resets +0x06 0x010 4 34 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/D18CF1D01506 b/SSD/Crucial/CT1000/CT1000MX500SSD1/D18CF1D01506 new file mode 100644 index 000000000..d30315f43 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/D18CF1D01506 @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 10 22:45:58 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9092 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3659 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 061 061 000 - 592 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 33 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 40 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 033 000 - 40 (Min/Max 0/67) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 061 061 001 - 39 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 163731127686 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2749700548 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 15034571161 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 31/40 Celsius +Lifetime Min/Max Temperature: 0/67 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3659 --- Lifetime Power-On Resets +0x01 0x010 4 9092 --- Power-on Hours +0x01 0x018 6 522370438 --- Logical Sectors Written +0x01 0x020 6 2388179148 --- Number of Write Commands +0x01 0x028 6 2137419391 --- Logical Sectors Read +0x01 0x030 6 2749516349 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 36 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 42 --- Average Long Term Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 50 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7980 --- Number of Hardware Resets +0x06 0x010 4 371 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 39 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/E55F7A84AA6B b/SSD/Crucial/CT1000/CT1000MX500SSD1/E55F7A84AA6B new file mode 100644 index 000000000..b7c99e114 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/E55F7A84AA6B @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 18 09:41:02 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5209 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3949 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 084 084 000 - 247 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 49 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 38 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 044 000 - 33 (Min/Max 0/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 5 +202 Percent_Lifetime_Remain ----CK 084 084 001 - 16 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 61665862046 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1060889453 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 5762727904 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 23/33 Celsius +Lifetime Min/Max Temperature: 0/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (120) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3949 --- Lifetime Power-On Resets +0x01 0x010 4 5209 --- Power-on Hours +0x01 0x018 6 1536319902 --- Logical Sectors Written +0x01 0x020 6 1352630856 --- Number of Write Commands +0x01 0x028 6 3237749524 --- Logical Sectors Read +0x01 0x030 6 1067986776 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 49 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 40 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 23129 --- Number of Hardware Resets +0x06 0x010 4 5139 --- Number of ASR Events +0x06 0x018 4 5 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/FE3C01A5CA38 b/SSD/Crucial/CT1000/CT1000MX500SSD1/FE3C01A5CA38 new file mode 100644 index 000000000..469e1b9d6 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/FE3C01A5CA38 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 30 14:19:11 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13875 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1451 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 46 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 62 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 58 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 063 045 000 - 37 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 21165522564 +247 Host_Program_Page_Count -O--CK 100 100 000 - 225089519 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 180603013 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 31/38 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (86) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1451 --- Lifetime Power-On Resets +0x01 0x010 4 13875 --- Power-on Hours +0x01 0x018 6 21165522564 --- Logical Sectors Written +0x01 0x020 6 407310255 --- Number of Write Commands +0x01 0x028 6 22328007710 --- Logical Sectors Read +0x01 0x030 6 305568081 --- Number of Read Commands +0x01 0x038 6 2708249491 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 63 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 41 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10084 --- Number of Hardware Resets +0x06 0x010 4 1322 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD4/1DFCFFF8D712 b/SSD/Crucial/CT1000/CT1000MX500SSD4/1DFCFFF8D712 new file mode 100644 index 000000000..e600bc06a --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD4/1DFCFFF8D712 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR022 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 23:50:43 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6078 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2588 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 19 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 132 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 43 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 050 019 000 - 50 (Min/Max 0/81) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 8184290960 +247 Host_Program_Page_Count -O--CK 100 100 000 - 139190222 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 329297034 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 35/51 Celsius +Lifetime Min/Max Temperature: 0/81 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (95) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2588 --- Lifetime Power-On Resets +0x01 0x010 4 6078 --- Power-on Hours +0x01 0x018 6 3889323664 --- Logical Sectors Written +0x01 0x020 6 118566790 --- Number of Write Commands +0x01 0x028 6 1020373328 --- Logical Sectors Read +0x01 0x030 6 84847271 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 132 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 81 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 66 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 46 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 58 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10104 --- Number of Hardware Resets +0x06 0x010 4 162 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD4/5BA3415A147C b/SSD/Crucial/CT1000/CT1000MX500SSD4/5BA3415A147C new file mode 100644 index 000000000..fef10c8d8 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD4/5BA3415A147C @@ -0,0 +1,229 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 26 19:50:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7857 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3752 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 48 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 458 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 49 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 044 019 000 - 56 (Min/Max 0/81) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 29933475268 +247 Host_Program_Page_Count -O--CK 100 100 000 - 494213735 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 320671979 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7247 - +# 2 Short offline Completed without error 00% 7246 - +# 3 Short offline Completed without error 00% 7230 - +# 4 Short offline Completed without error 00% 6812 - +# 5 Short offline Completed without error 00% 7219 - +# 6 Short offline Completed without error 00% 7213 - +# 7 Short offline Completed without error 00% 7211 - +# 8 Short offline Completed without error 00% 7202 - +# 9 Short offline Completed without error 00% 7189 - +#10 Short offline Completed without error 00% 7181 - +#11 Short offline Completed without error 00% 7024 - +#12 Short offline Completed without error 00% 6973 - +#13 Short offline Completed without error 00% 6701 - +#14 Short offline Completed without error 00% 6901 - +#15 Short offline Completed without error 00% 6884 - +#16 Extended offline Completed without error 00% 6870 - +#17 Short offline Completed without error 00% 6843 - +#18 Short offline Completed without error 00% 6836 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 56 Celsius +Power Cycle Min/Max Temperature: 25/56 Celsius +Lifetime Min/Max Temperature: 0/81 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (14) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3752 --- Lifetime Power-On Resets +0x01 0x010 4 7857 --- Power-on Hours +0x01 0x018 6 4163671492 --- Logical Sectors Written +0x01 0x020 6 248924677 --- Number of Write Commands +0x01 0x028 6 1626985386 --- Logical Sectors Read +0x01 0x030 6 473974936 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 458 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 56 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 42 --- Average Long Term Temperature +0x05 0x020 1 81 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 102 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 288051 --- Number of Hardware Resets +0x06 0x010 4 14990 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD4/DE79F6695550 b/SSD/Crucial/CT1000/CT1000MX500SSD4/DE79F6695550 new file mode 100644 index 000000000..ad352f79f --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD4/DE79F6695550 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT1000MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 10 22:45:58 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24267 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4640 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 087 087 000 - 196 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 71 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 41 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 015 000 - 41 (Min/Max 0/85) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 087 087 001 - 13 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 104333292241 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1688865217 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2344672324 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 35/48 Celsius +Lifetime Min/Max Temperature: 0/85 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (108) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4640 --- Lifetime Power-On Resets +0x01 0x010 4 24267 --- Power-on Hours +0x01 0x018 6 1254077137 --- Logical Sectors Written +0x01 0x020 6 802082588 --- Number of Write Commands +0x01 0x028 6 2341753127 --- Logical Sectors Read +0x01 0x030 6 1118409581 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 71 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 52 --- Average Short Term Temperature +0x05 0x018 1 54 --- Average Long Term Temperature +0x05 0x020 1 85 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 78 --- Highest Average Short Term Temperature +0x05 0x038 1 49 --- Lowest Average Short Term Temperature +0x05 0x040 1 78 --- Highest Average Long Term Temperature +0x05 0x048 1 49 --- Lowest Average Long Term Temperature +0x05 0x050 4 34 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 72682 --- Number of Hardware Resets +0x06 0x010 4 865 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT1050/CT1050MX300SSD4/47D2A57D42FA b/SSD/Crucial/CT1050/CT1050MX300SSD4/47D2A57D42FA new file mode 100644 index 000000000..9ca48130a --- /dev/null +++ b/SSD/Crucial/CT1050/CT1050MX300SSD4/47D2A57D42FA @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT1050MX300SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR040 +User Capacity: 1,050,214,588,416 bytes [1.05 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Apr 28 19:43:48 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2783) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 13) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 646 + 12 Power_Cycle_Count -O--CK 100 100 000 - 72 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 031 000 - 42 (Min/Max 15/69) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 285209299 +247 Host_Program_Page_Count -O--CK 100 100 000 - 8912825 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2450946 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 8763 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 605 - +# 2 Vendor (0xff) Completed without error 00% 320 - +# 3 Vendor (0xff) Completed without error 00% 130 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 19/43 Celsius +Lifetime Min/Max Temperature: 15/69 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (308) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 72 --- Lifetime Power-On Resets +0x01 0x010 4 646 --- Power-on Hours +0x01 0x018 6 285209299 --- Logical Sectors Written +0x01 0x020 6 5567644 --- Number of Write Commands +0x01 0x028 6 2114762830 --- Logical Sectors Read +0x01 0x030 6 9242204 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 44 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 69 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 553 --- Number of Hardware Resets +0x06 0x010 4 225 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120BX100SSD1/4F7C9B36A9C3 b/SSD/Crucial/CT120/CT120BX100SSD1/4F7C9B36A9C3 new file mode 100644 index 000000000..7e83491cb --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX100SSD1/4F7C9B36A9C3 @@ -0,0 +1,199 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CT120BX100SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU01 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Dec 6 03:24:06 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 5077 + 12 Power_Cycle_Count ------ 100 100 000 - 529 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 103 +163 Initial_Bad_Block_Count ------ 100 100 000 - 25 +164 Total_Erase_Count ------ 100 100 000 - 237336 +165 Max_Erase_Count ------ 100 100 000 - 258 +166 Min_Erase_Count ------ 100 100 000 - 171 +167 Average_Erase_Count ------ 100 100 000 - 230 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 2000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 92 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 494 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 153 +194 Temperature_Celsius ------ 100 100 000 - 30 +195 Hardware_ECC_Recovered ------ 100 100 000 - 323193 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 1 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 689935 +242 Host_Reads_32MiB ------ 100 100 000 - 686617 +245 TLC_Writes_32MiB ------ 100 100 000 - 949344 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 64 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 24/31 Celsius +Lifetime Min/Max Temperature: 0/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (74) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 529 --- Lifetime Power-On Resets +0x01 0x010 4 5077 --- Power-on Hours +0x01 0x018 6 2265944221 --- Logical Sectors Written +0x01 0x020 6 601097963 --- Number of Write Commands +0x01 0x028 6 2048511625 --- Logical Sectors Read +0x01 0x030 6 858538876 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 155 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3983 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT120/CT120BX300SSD1/E669303E374B b/SSD/Crucial/CT120/CT120BX300SSD1/E669303E374B new file mode 100644 index 000000000..efe210832 --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX300SSD1/E669303E374B @@ -0,0 +1,133 @@ +smartctl 7.3 2022-02-28 r5338 [NetBSD 10.1 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX300SSD1 +Serial Number: -- +Firmware Version: M2CR010 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu May 1 08:10:25 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 418 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 542 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 098 098 000 Old_age Always - 77 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 43 +180 Unused_Reserve_NAND_Blk 0x0033 100 100 000 Pre-fail Always - 46 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 35 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 098 098 001 Old_age Offline - 2 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 3847660138 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 35698902 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 98555756 + +SMART Error Log Version: 1 +Warning: ATA error count 0 inconsistent with error log pointer 1 + +ATA Error Count: 0 + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 ec 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE + c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 162 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/095F5B09D61A b/SSD/Crucial/CT120/CT120BX500SSD1/095F5B09D61A new file mode 100644 index 000000000..11315ca7e --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/095F5B09D61A @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 23 03:30:34 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 38166 + 12 Power_Cycle_Count -O--CK 100 100 050 - 186 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 466 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 154 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 065 029 050 Past 35 (Min/Max 26/71) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 323 +202 Percent_Lifetime_Remain ----CK 069 069 001 - 69 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 20507080759 +247 Host_Program_Page_Count -O--CK 100 100 050 - 640846273 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 2895037640 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 325 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 325 [0] log entry is empty +Error 324 [3] log entry is empty +Error 323 [2] log entry is empty +Error 322 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 68 00 00 ae 00 3f 98 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 90 00 00 00 00 6b 00 a3 b8 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 90 00 08 00 00 6c 00 a3 48 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 08 00 68 00 00 ae 00 3f 98 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 08 00 68 00 00 ae 00 3f 98 00 00 00:00:00.000 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 35978 - +# 2 Short offline Completed without error 00% 35954 - +# 3 Short offline Completed without error 00% 26060 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 186 --- Lifetime Power-On Resets +0x01 0x010 4 38166 --- Power-on Hours +0x01 0x018 6 3327211575 --- Logical Sectors Written +0x01 0x020 6 865803783 --- Number of Write Commands +0x01 0x028 6 152163863 --- Logical Sectors Read +0x01 0x030 6 5158081 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 38 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 12 Command failed due to ICRC error +0x0002 4 12 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/1289FEA11CE4 b/SSD/Crucial/CT120/CT120BX500SSD1/1289FEA11CE4 new file mode 100644 index 000000000..6b0d07d98 --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/1289FEA11CE4 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Sep 7 17:15:59 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 41) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 27734 + 12 Power_Cycle_Count -O--CK 100 100 050 - 32 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 469 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 16 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 065 038 050 Past 35 (Min/Max 26/62) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 2 +202 Percent_Lifetime_Remain ----CK 069 069 001 - 69 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 21626510140 +247 Host_Program_Page_Count -O--CK 100 100 050 - 675828441 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 2752487424 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] log entry is empty +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 90% 27473 - +# 2 Short offline Interrupted (host reset) 90% 25923 - +# 3 Short offline Completed without error 00% 21613 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 27734 --- Power-on Hours +0x01 0x018 6 151673660 --- Logical Sectors Written +0x01 0x020 6 366332870 --- Number of Write Commands +0x01 0x028 6 2184980624 --- Logical Sectors Read +0x01 0x030 6 47073404 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 2 Command failed due to ICRC error +0x0002 4 2 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/403A032C400A b/SSD/Crucial/CT120/CT120BX500SSD1/403A032C400A new file mode 100644 index 000000000..7c3b2d099 --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/403A032C400A @@ -0,0 +1,148 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Sep 7 17:15:59 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 27900 + 12 Power_Cycle_Count -O--CK 100 100 050 - 31 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 467 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 16 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 062 038 050 Past 38 (Min/Max 28/62) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 069 069 001 - 69 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 21628813636 +247 Host_Program_Page_Count -O--CK 100 100 050 - 675900426 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 2761574400 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 27637 - +# 2 Short offline Completed without error 00% 26078 - +# 3 Short offline Completed without error 00% 21738 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 27900 --- Power-on Hours +0x01 0x018 6 153977156 --- Logical Sectors Written +0x01 0x020 6 366881373 --- Number of Write Commands +0x01 0x028 6 2190783124 --- Logical Sectors Read +0x01 0x030 6 47584592 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 39 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 33 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/6B27677E5E05 b/SSD/Crucial/CT120/CT120BX500SSD1/6B27677E5E05 new file mode 100644 index 000000000..80856f3aa --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/6B27677E5E05 @@ -0,0 +1,144 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 20:59:56 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10129 + 12 Power_Cycle_Count -O--CK 100 100 050 - 967 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 219 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 122 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 1 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 059 021 050 Past 41 (Min/Max 29/79) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 086 086 001 - 86 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 12768779842 +247 Host_Program_Page_Count -O--CK 100 100 050 - 399024370 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 828582824 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 967 --- Lifetime Power-On Resets +0x01 0x010 4 10129 --- Power-on Hours +0x01 0x018 6 4178845250 --- Logical Sectors Written +0x01 0x020 6 285300732 --- Number of Write Commands +0x01 0x028 6 1231045309 --- Logical Sectors Read +0x01 0x030 6 403020673 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 52 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/953C3544A8E9 b/SSD/Crucial/CT120/CT120BX500SSD1/953C3544A8E9 new file mode 100644 index 000000000..604e71ee2 --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/953C3544A8E9 @@ -0,0 +1,178 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Mar 10 18:10:09 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 187 + 12 Power_Cycle_Count -O--CK 100 100 050 - 50 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 7 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 33 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 068 031 050 Past 32 (Min/Max 30/69) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 4 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 100 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 473886901 +247 Host_Program_Page_Count -O--CK 100 100 050 - 14808965 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 20367360 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 11 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 11 [2] log entry is empty +Error 10 [1] log entry is empty +Error 9 [0] log entry is empty +Error 8 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ DATA + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 60 00 08 b8 b8 00 06 ce 00 48 80 40 08 00:00:00.000 READ FPDMA QUEUED + 60 00 08 f0 f0 00 01 a2 00 2c 48 40 08 00:00:00.000 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 187 --- Power-on Hours +0x01 0x018 6 473886901 --- Logical Sectors Written +0x01 0x020 6 1906100 --- Number of Write Commands +0x01 0x028 6 542841138 --- Logical Sectors Read +0x01 0x030 6 3370843 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/F1483180BA98 b/SSD/Crucial/CT120/CT120BX500SSD1/F1483180BA98 new file mode 100644 index 000000000..05e2d3dec --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/F1483180BA98 @@ -0,0 +1,186 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 23 03:30:34 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 37785 + 12 Power_Cycle_Count -O--CK 100 100 050 - 196 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 499 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 168 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 063 031 050 Past 37 (Min/Max 26/69) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 5160 +202 Percent_Lifetime_Remain ----CK 067 067 001 - 67 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 21033040607 +247 Host_Program_Page_Count -O--CK 100 100 050 - 657282518 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 3064234288 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 5270 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 5270 [1] log entry is empty +Error 5269 [0] log entry is empty +Error 5268 [3] log entry is empty +Error 5267 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + 60 00 20 18 18 00 06 86 00 2e 48 40 08 00:00:00.000 READ FPDMA QUEUED + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 60 00 70 28 28 00 0c 7d 00 bc 08 40 08 00:00:00.000 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 35564 - +# 2 Short offline Completed without error 00% 25653 - +# 3 Short offline Completed without error 00% 7500 - +# 4 Offline Aborted by host 00% 7104 - +# 5 Short offline Completed without error 00% 6950 - +# 6 Short offline Completed without error 00% 3213 - +# 7 Short offline Aborted by host 00% 10 - +# 8 Short offline Completed without error 00% 10 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 196 --- Lifetime Power-On Resets +0x01 0x010 4 37785 --- Power-on Hours +0x01 0x018 6 3853171423 --- Logical Sectors Written +0x01 0x020 6 874805517 --- Number of Write Commands +0x01 0x028 6 792291502 --- Logical Sectors Read +0x01 0x030 6 6448261 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/FDDC1B38E9A5 b/SSD/Crucial/CT120/CT120BX500SSD1/FDDC1B38E9A5 new file mode 100644 index 000000000..432e7bd39 --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/FDDC1B38E9A5 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Feb 9 02:10:52 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 23625 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1002 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 285 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 216 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 15 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 068 014 050 Past 32 (Min/Max 26/86) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 116 +202 Percent_Lifetime_Remain ----CK 081 081 001 - 81 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 30651770762 +247 Host_Program_Page_Count -O--CK 100 100 050 - 957867836 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 1482936944 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 121 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 121 [0] log entry is empty +Error 120 [3] log entry is empty +Error 119 [2] log entry is empty +Error 118 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 a0 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ DATA + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 61 00 d8 a0 a0 00 0c 1d 00 a2 f0 40 08 00:00:00.000 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 11591 - +# 2 Extended offline Aborted by host 70% 10975 - +# 3 Extended offline Aborted by host 70% 10975 - +# 4 Short offline Completed without error 00% 10975 - +# 5 Short offline Completed without error 00% 10726 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1002 --- Lifetime Power-On Resets +0x01 0x010 4 23625 --- Power-on Hours +0x01 0x018 6 586999690 --- Logical Sectors Written +0x01 0x020 6 373998970 --- Number of Write Commands +0x01 0x028 6 2759199095 --- Logical Sectors Read +0x01 0x030 6 550329792 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 35 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120M500SSD1/06DEFF91AEEC b/SSD/Crucial/CT120/CT120M500SSD1/06DEFF91AEEC new file mode 100644 index 000000000..51543db21 --- /dev/null +++ b/SSD/Crucial/CT120/CT120M500SSD1/06DEFF91AEEC @@ -0,0 +1,219 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT120M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 19 18:58:14 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 555) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 1 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 37100 + 12 Power_Cycle_Count -O--CK 100 100 000 - 410 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 43 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 200 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1990 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 034 000 - 32 (Min/Max 0/66) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1764 +202 Percent_Lifetime_Remain P---CK 099 099 000 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 6055709042 +247 Host_Program_Page_Count -O--CK 100 100 --- - 191668987 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 160273811 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 37086 - +# 2 Vendor (0xff) Completed without error 00% 37066 - +# 3 Vendor (0xff) Completed without error 00% 37043 - +# 4 Vendor (0xff) Completed without error 00% 37031 - +# 5 Vendor (0xff) Completed without error 00% 37018 - +# 6 Vendor (0xff) Completed without error 00% 37006 - +# 7 Vendor (0xff) Completed without error 00% 36993 - +# 8 Vendor (0xff) Completed without error 00% 36981 - +# 9 Vendor (0xff) Completed without error 00% 36968 - +#10 Vendor (0xff) Completed without error 00% 36956 - +#11 Vendor (0xff) Completed without error 00% 36944 - +#12 Vendor (0xff) Completed without error 00% 36931 - +#13 Vendor (0xff) Completed without error 00% 36919 - +#14 Vendor (0xff) Completed without error 00% 36906 - +#15 Vendor (0xff) Completed without error 00% 36894 - +#16 Vendor (0xff) Completed without error 00% 36882 - +#17 Vendor (0xff) Completed without error 00% 36869 - +#18 Vendor (0xff) Completed without error 00% 36857 - +#19 Vendor (0xff) Completed without error 00% 36844 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 31/32 Celsius +Lifetime Min/Max Temperature: 0/66 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (360) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 410 --- Lifetime Power-On Resets +0x01 0x010 4 37100 --- Power-on Hours +0x01 0x018 6 6055709042 --- Logical Sectors Written +0x01 0x020 6 135496088 --- Number of Write Commands +0x01 0x028 6 2984328192 --- Logical Sectors Read +0x01 0x030 6 195652920 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2369 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 65 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 64 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 57 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 1764 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120M500SSD1/6D3D255CBA36 b/SSD/Crucial/CT120/CT120M500SSD1/6D3D255CBA36 new file mode 100644 index 000000000..b00536a55 --- /dev/null +++ b/SSD/Crucial/CT120/CT120M500SSD1/6D3D255CBA36 @@ -0,0 +1,219 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT120M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU03 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 10 15:30:52 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10235) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 3 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 63032 + 12 Power_Cycle_Count -O--CK 100 100 000 - 154 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 44 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 136 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1990 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 070 054 000 - 30 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 16 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 099 099 000 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 1374395638 +247 Host_Program_Page_Count -O--CK 100 100 --- - 47639851 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 318659662 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 63030 - +# 2 Vendor (0xff) Completed without error 00% 63018 - +# 3 Vendor (0xff) Completed without error 00% 63005 - +# 4 Vendor (0xff) Completed without error 00% 62993 - +# 5 Vendor (0xff) Completed without error 00% 62980 - +# 6 Vendor (0xff) Completed without error 00% 62968 - +# 7 Vendor (0xff) Completed without error 00% 62956 - +# 8 Vendor (0xff) Completed without error 00% 62943 - +# 9 Vendor (0xff) Completed without error 00% 62931 - +#10 Vendor (0xff) Completed without error 00% 62918 - +#11 Vendor (0xff) Completed without error 00% 62906 - +#12 Vendor (0xff) Completed without error 00% 62893 - +#13 Vendor (0xff) Completed without error 00% 62881 - +#14 Vendor (0xff) Completed without error 00% 62869 - +#15 Vendor (0xff) Completed without error 00% 62856 - +#16 Vendor (0xff) Completed without error 00% 62844 - +#17 Vendor (0xff) Completed without error 00% 62831 - +#18 Vendor (0xff) Completed without error 00% 62819 - +#19 Vendor (0xff) Completed without error 00% 62807 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 26/35 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (105) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 154 --- Lifetime Power-On Resets +0x01 0x010 4 63032 --- Power-on Hours +0x01 0x018 6 1374395638 --- Logical Sectors Written +0x01 0x020 6 78463866 --- Number of Write Commands +0x01 0x028 6 285846645 --- Logical Sectors Read +0x01 0x030 6 10959976 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 71 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120M500SSD1/935B03938F2F b/SSD/Crucial/CT120/CT120M500SSD1/935B03938F2F new file mode 100644 index 000000000..f081816dc --- /dev/null +++ b/SSD/Crucial/CT120/CT120M500SSD1/935B03938F2F @@ -0,0 +1,218 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT120M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 24 23:47:25 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10235) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 3 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 26856 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2815 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 064 064 000 - 1105 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2440 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1990 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 059 000 - 34 (Min/Max 0/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 064 064 000 - 36 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 12699413535 +247 Host_Program_Page_Count -O--CK 100 100 --- - 459011852 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 4008189800 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 26846 - +# 2 Vendor (0xff) Completed without error 00% 26828 - +# 3 Vendor (0xff) Completed without error 00% 26809 - +# 4 Vendor (0xff) Completed without error 00% 26790 - +# 5 Vendor (0xff) Completed without error 00% 26772 - +# 6 Vendor (0xff) Completed without error 00% 26754 - +# 7 Vendor (0xff) Completed without error 00% 26735 - +# 8 Vendor (0xff) Completed without error 00% 26716 - +# 9 Vendor (0xff) Completed without error 00% 26698 - +#10 Vendor (0xff) Completed without error 00% 26680 - +#11 Vendor (0xff) Completed without error 00% 26662 - +#12 Vendor (0xff) Completed without error 00% 26644 - +#13 Vendor (0xff) Completed without error 00% 26627 - +#14 Vendor (0xff) Completed without error 00% 26607 - +#15 Vendor (0xff) Completed without error 00% 26589 - +#16 Vendor (0xff) Completed without error 00% 26569 - +#17 Vendor (0xff) Completed without error 00% 26550 - +#18 Vendor (0xff) Completed without error 00% 26533 - +#19 Vendor (0xff) Completed without error 00% 26514 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 23/38 Celsius +Lifetime Min/Max Temperature: 0/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (467) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2815 --- Lifetime Power-On Resets +0x01 0x010 4 26856 --- Power-on Hours +0x01 0x018 6 12699413535 --- Logical Sectors Written +0x01 0x020 6 463234231 --- Number of Write Commands +0x01 0x028 6 7452196848 --- Logical Sectors Read +0x01 0x030 6 118762283 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1508 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 51 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 47 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT120/CT120M500SSD1/C5471DAA6DB4 b/SSD/Crucial/CT120/CT120M500SSD1/C5471DAA6DB4 new file mode 100644 index 000000000..0783dce06 --- /dev/null +++ b/SSD/Crucial/CT120/CT120M500SSD1/C5471DAA6DB4 @@ -0,0 +1,221 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT120M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 19 09:04:50 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 555) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 41 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46469 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1979 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 055 055 000 - 1375 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 671 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1990 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 057 000 - 32 (Min/Max 0/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 055 055 000 - 45 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 38397624923 +247 Host_Program_Page_Count -O--CK 100 100 --- - 1174704584 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 1055444196 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 46454 - +# 2 Vendor (0xff) Completed without error 00% 46446 - +# 3 Short offline Completed without error 00% 46409 - +# 4 Short offline Completed without error 00% 46403 - +# 5 Vendor (0xff) Completed without error 00% 46395 - +# 6 Vendor (0xff) Completed without error 00% 46365 - +# 7 Vendor (0xff) Completed without error 00% 46346 - +# 8 Vendor (0xff) Completed without error 00% 46328 - +# 9 Vendor (0xff) Completed without error 00% 46312 - +#10 Extended offline Completed without error 00% 46269 - +#11 Vendor (0xff) Completed without error 00% 46265 - +#12 Vendor (0xff) Completed without error 00% 46245 - +#13 Vendor (0xff) Completed without error 00% 46234 - +#14 Vendor (0xff) Completed without error 00% 46203 - +#15 Vendor (0xff) Completed without error 00% 46188 - +#16 Vendor (0xff) Completed without error 00% 46162 - +#17 Vendor (0xff) Completed without error 00% 46160 - +#18 Vendor (0xff) Completed without error 00% 46145 - +#19 Vendor (0xff) Completed without error 00% 46131 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 25/32 Celsius +Lifetime Min/Max Temperature: 0/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (281) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1979 --- Lifetime Power-On Resets +0x01 0x010 4 46469 --- Power-on Hours +0x01 0x018 6 38397624923 --- Logical Sectors Written +0x01 0x020 6 927031898 --- Number of Write Commands +0x01 0x028 6 37261915156 --- Logical Sectors Read +0x01 0x030 6 607025572 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1839 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT128/CT128M550SSD3/026C8B1B4E89 b/SSD/Crucial/CT128/CT128M550SSD3/026C8B1B4E89 new file mode 100644 index 000000000..fd84c7c45 --- /dev/null +++ b/SSD/Crucial/CT128/CT128M550SSD3/026C8B1B4E89 @@ -0,0 +1,204 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT128M550SSD3 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Mar 4 19:14:51 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 595) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3649 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1937 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 131 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 79 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1036 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 051 030 000 - 49 (Min/Max 14/70) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 096 096 000 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 9152307967 +247 Host_Program_Page_Count -O--CK 100 100 000 - 294100496 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 785726122 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 3572 - +# 2 Vendor (0xff) Completed without error 00% 3132 - +# 3 Vendor (0xff) Completed without error 00% 2122 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 25/50 Celsius +Lifetime Min/Max Temperature: 14/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (351) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1937 --- Lifetime Power-On Resets +0x01 0x010 4 3649 --- Power-on Hours +0x01 0x018 6 9152307967 --- Logical Sectors Written +0x01 0x020 6 108118295 --- Number of Write Commands +0x01 0x028 6 6383581706 --- Logical Sectors Read +0x01 0x030 6 177395764 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1887 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 48 --- Average Short Term Temperature +0x05 0x018 1 46 --- Average Long Term Temperature +0x05 0x020 1 70 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 57 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 52 --- Highest Average Long Term Temperature +0x05 0x048 1 39 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 102 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT2000/CT2000BX500SSD1/8BE71867C530 b/SSD/Crucial/CT2000/CT2000BX500SSD1/8BE71867C530 new file mode 100644 index 000000000..f89cfeb02 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000BX500SSD1/8BE71867C530 @@ -0,0 +1,151 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR030 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 21:41:38 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 35373 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1378 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 095 095 000 - 89 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 811 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 11 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 072 035 000 - 28 (Min/Max 21/65) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 095 095 001 - 5 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 82706384059 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2584574501 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 11154142912 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 1431505 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 16 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 214 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 925 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 19 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1378 --- Lifetime Power-On Resets +0x01 0x010 4 35373 --- Power-on Hours +0x01 0x018 6 1102005435 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 3270301531 --- Logical Sectors Read +0x01 0x030 6 970 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT2000/CT2000BX500SSD1/D54E0BF3221F b/SSD/Crucial/CT2000/CT2000BX500SSD1/D54E0BF3221F new file mode 100644 index 000000000..bdda144b7 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000BX500SSD1/D54E0BF3221F @@ -0,0 +1,94 @@ +smartctl 7.4 2023-08-01 r5530 [NetBSD 10.1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR061 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 10 11:52:35 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 63 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 100 100 000 Old_age Always - 1 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 23 +180 Unused_Reserve_NAND_Blk 0x0033 100 100 000 Pre-fail Always - 50 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 076 074 000 Old_age Always - 24 (Min/Max 21/26) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 100 100 001 Old_age Offline - 0 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 0 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 0 +249 Unkn_CrucialMicron_Attr 0x0032 100 100 000 Old_age Always - 0 +251 Unkn_CrucialMicron_Attr 0x0032 100 100 000 Old_age Always - 1870983 +252 Unkn_CrucialMicron_Attr 0x0032 100 100 000 Old_age Always - 0 +253 Unkn_CrucialMicron_Attr 0x0032 100 100 000 Old_age Always - 0 + +Read SMART Error Log failed: request failed, error code 0x02 + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/64423CA937DC b/SSD/Crucial/CT2000/CT2000MX500SSD1/64423CA937DC new file mode 100644 index 000000000..e078c272c --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/64423CA937DC @@ -0,0 +1,217 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-STABLE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Dec 12 09:49:38 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 18642 + 12 Power_Cycle_Count -O--CK 100 100 000 - 84 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 085 085 000 - 159 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 39 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 116 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 073 057 000 - 27 (Min/Max 17/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 085 085 001 - 15 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 24536753292 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1549869013 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 975249015 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18464 - +# 2 Short offline Completed without error 00% 18464 - +# 3 Short offline Completed without error 00% 17835 - +# 4 Short offline Completed without error 00% 17835 - +# 5 Short offline Completed without error 00% 17819 - +# 6 Short offline Completed without error 00% 17775 - +# 7 Short offline Completed without error 00% 17774 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 23/32 Celsius +Lifetime Min/Max Temperature: 17/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (100) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 84 --- Lifetime Power-On Resets +0x01 0x010 4 18642 --- Power-on Hours +0x01 0x018 6 24536753292 --- Logical Sectors Written +0x01 0x020 6 1172494495 --- Number of Write Commands +0x01 0x028 6 95864850517 --- Logical Sectors Read +0x01 0x030 6 631984356 --- Number of Read Commands +0x01 0x038 6 2689742458 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 39 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 332 --- Number of Hardware Resets +0x06 0x010 4 21 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/67141DB7052B b/SSD/Crucial/CT2000/CT2000MX500SSD1/67141DB7052B new file mode 100644 index 000000000..771bdd20e --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/67141DB7052B @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 21 08:46:28 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 184 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 23 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 92 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 103 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 040 000 - 40 (Min/Max 24/60) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 23598241261 +247 Host_Program_Page_Count -O--CK 100 100 000 - 212892443 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 367864852 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 33/59 Celsius +Lifetime Min/Max Temperature: 24/60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (42) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 184 --- Lifetime Power-On Resets +0x01 0x010 4 9261 --- Power-on Hours +0x01 0x018 6 23598241261 --- Logical Sectors Written +0x01 0x020 6 222691572 --- Number of Write Commands +0x01 0x028 6 52839983814 --- Logical Sectors Read +0x01 0x030 6 375707187 --- Number of Read Commands +0x01 0x038 6 3276218141 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 92 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 40 --- Average Long Term Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 34 --- Lowest Average Long Term Temperature +0x05 0x050 4 45 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 757 --- Number of Hardware Resets +0x06 0x010 4 195 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 83 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/7D5884385FA7 b/SSD/Crucial/CT2000/CT2000MX500SSD1/7D5884385FA7 new file mode 100644 index 000000000..63ce8b891 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/7D5884385FA7 @@ -0,0 +1,208 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 10 19:04:49 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 249) Self-test routine in progress... + 90% of test remaining. +Total time to complete Offline +data collection: ( 77) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8605 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 54 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 133 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 058 000 - 34 (Min/Max 0/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 57321365946 +247 Host_Program_Page_Count -O--CK 100 100 000 - 537901534 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 336782165 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Self_test_in_progress [90% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x8): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 25/38 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x010 4 8605 --- Power-on Hours +0x01 0x018 6 57321365946 --- Logical Sectors Written +0x01 0x020 6 881728773 --- Number of Write Commands +0x01 0x028 6 66766541725 --- Logical Sectors Read +0x01 0x030 6 1146008919 --- Number of Read Commands +0x01 0x038 6 914644884 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 74 --- Number of Hardware Resets +0x06 0x010 4 12 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/8924D4479BB8 b/SSD/Crucial/CT2000/CT2000MX500SSD1/8924D4479BB8 new file mode 100644 index 000000000..2b2b0eb68 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/8924D4479BB8 @@ -0,0 +1,210 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR033 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 21 18:06:47 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 723 + 12 Power_Cycle_Count -O--CK 100 100 000 - 82 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 23 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 40 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 047 000 - 38 (Min/Max 0/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1283586063 +247 Host_Program_Page_Count -O--CK 100 100 000 - 14672884 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 10158225 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 317 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 36/38 Celsius +Lifetime Min/Max Temperature: 0/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (108) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 82 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1283586063 --- Logical Sectors Written +0x01 0x020 6 19165112 --- Number of Write Commands +0x01 0x028 6 2743209966 --- Logical Sectors Read +0x01 0x030 6 61878951 --- Number of Read Commands +0x01 0x038 6 2604250967 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 23 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 37 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1608 --- Number of Hardware Resets +0x06 0x010 4 31 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/892C831A9A33 b/SSD/Crucial/CT2000/CT2000MX500SSD1/892C831A9A33 new file mode 100644 index 000000000..d791a7306 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/892C831A9A33 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 1 06:03:27 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 11446 + 12 Power_Cycle_Count -O--CK 100 100 000 - 339 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 10 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 134 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 78 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 076 056 000 - 24 (Min/Max 0/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 10983890622 +247 Host_Program_Page_Count -O--CK 100 100 000 - 98203311 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 71106298 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 19/24 Celsius +Lifetime Min/Max Temperature: 0/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (67) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 339 --- Lifetime Power-On Resets +0x01 0x010 4 11446 --- Power-on Hours +0x01 0x018 6 2393956030 --- Logical Sectors Written +0x01 0x020 6 48292109 --- Number of Write Commands +0x01 0x028 6 178388993 --- Logical Sectors Read +0x01 0x030 6 43186998 --- Number of Read Commands +0x01 0x038 6 2551800031 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 135 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 41 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5861 --- Number of Hardware Resets +0x06 0x010 4 544 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/8B8418CACB58 b/SSD/Crucial/CT2000/CT2000MX500SSD1/8B8418CACB58 new file mode 100644 index 000000000..6013f7b6f --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/8B8418CACB58 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 21:41:38 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8557 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 8 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 114 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 073 060 000 - 27 (Min/Max 24/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 2149432 +247 Host_Program_Page_Count -O--CK 100 100 000 - 17082 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 114364 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/27 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 8557 --- Power-on Hours +0x01 0x018 6 2149432 --- Logical Sectors Written +0x01 0x020 6 3051 --- Number of Write Commands +0x01 0x028 6 459794 --- Logical Sectors Read +0x01 0x030 6 8733 --- Number of Read Commands +0x01 0x038 6 742611584 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 84 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/F59D935E2648 b/SSD/Crucial/CT2000/CT2000MX500SSD1/F59D935E2648 new file mode 100644 index 000000000..ac0ce8568 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/F59D935E2648 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 2 20:25:42 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12954 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15575 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 34 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1094 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 90 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 036 000 - 38 (Min/Max 0/64) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 40762426030 +247 Host_Program_Page_Count -O--CK 100 100 000 - 792213158 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 600982135 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9534 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 29/40 Celsius +Lifetime Min/Max Temperature: 0/64 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (83) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15575 --- Lifetime Power-On Resets +0x01 0x010 4 12954 --- Power-on Hours +0x01 0x018 6 2107720366 --- Logical Sectors Written +0x01 0x020 6 260919519 --- Number of Write Commands +0x01 0x028 6 1717900321 --- Logical Sectors Read +0x01 0x030 6 350914906 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1094 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 64 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 52 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 46 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 83141 --- Number of Hardware Resets +0x06 0x010 4 9641 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT240/CT240BX200SSD1/A42569691C06 b/SSD/Crucial/CT240/CT240BX200SSD1/A42569691C06 new file mode 100644 index 000000000..d551ca2be --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX200SSD1/A42569691C06 @@ -0,0 +1,215 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CT240BX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02.6 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 30 09:48:17 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 1217 + 12 Power_Cycle_Count ------ 100 100 000 - 752 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 24 +163 Initial_Bad_Block_Count ------ 100 100 000 - 300 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 187361 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 2540 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 2431 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 2532 +164 Total_Erase_Count ------ 100 100 000 - 66998 +165 Max_Erase_Count ------ 100 100 000 - 86 +166 Min_Erase_Count ------ 100 100 000 - 19 +167 Average_Erase_Count ------ 100 100 000 - 52 +169 Remaining_Lifetime_Perc ------ 100 100 001 - 95 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 64 +194 Temperature_Celsius ------ 100 100 070 - 26 (33 34 37 35 0) +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 284702 +242 Host_Reads_32MiB ------ 100 100 000 - 218210 +245 TLC_Writes_32MiB ------ 100 100 000 - 395706 +246 SLC_Writes_32MiB ------ 100 100 000 - 374722 +247 Raid_Recoverty_Ct ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 1191 - +# 2 Offline Completed without error 00% 167 - +# 3 Offline Completed without error 00% 1190 - +# 4 Offline Completed without error 00% 1190 - +# 5 Offline Completed without error 00% 1190 - +# 6 Offline Completed without error 00% 1190 - +# 7 Offline Completed without error 00% 1190 - +# 8 Offline Completed without error 00% 1190 - +# 9 Offline Completed without error 00% 1190 - +#10 Offline Completed without error 00% 1190 - +#11 Offline Completed without error 00% 1190 - +#12 Offline Completed without error 00% 1190 - +#13 Offline Completed without error 00% 1190 - +#14 Offline Completed without error 00% 1190 - +#15 Offline Completed without error 00% 1190 - +#16 Offline Completed without error 00% 1190 - +#17 Offline Completed without error 00% 1190 - +#18 Offline Completed without error 00% 1190 - +#19 Offline Completed without error 00% 1024 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 752 --- Lifetime Power-On Resets +0x01 0x010 4 1217 --- Power-on Hours +0x01 0x018 6 1478372434 --- Logical Sectors Written +0x01 0x020 6 375308286 --- Number of Write Commands +0x01 0x028 6 1415738699 --- Logical Sectors Read +0x01 0x030 6 207223294 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 75 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3129 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/0F1792DD0A88 b/SSD/Crucial/CT240/CT240BX500SSD1/0F1792DD0A88 new file mode 100644 index 000000000..5eb830385 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/0F1792DD0A88 @@ -0,0 +1,145 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 5 07:51:23 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 14632 + 12 Power_Cycle_Count -O--CK 100 100 050 - 387 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 129 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 34 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 063 022 050 Past 37 (Min/Max 19/78) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 092 092 001 - 92 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 15617462042 +247 Host_Program_Page_Count -O--CK 100 100 050 - 488045688 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 596054016 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14598 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 387 --- Lifetime Power-On Resets +0x01 0x010 4 14632 --- Power-on Hours +0x01 0x018 6 2732560154 --- Logical Sectors Written +0x01 0x020 6 286014404 --- Number of Write Commands +0x01 0x028 6 859813250 --- Logical Sectors Read +0x01 0x030 6 541397442 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 9 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/13BBF8DCC541 b/SSD/Crucial/CT240/CT240BX500SSD1/13BBF8DCC541 new file mode 100644 index 000000000..6968f1381 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/13BBF8DCC541 @@ -0,0 +1,201 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 12:17:55 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 12330 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1864 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 178 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 464 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 30 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 058 015 050 Past 42 (Min/Max 19/85) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 12 +202 Percent_Lifetime_Remain ----CK 089 089 001 - 89 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 23001452332 +247 Host_Program_Page_Count -O--CK 100 100 050 - 718795385 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 1053105952 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 34 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 34 [1] log entry is empty +Error 33 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + 2f 00 00 01 01 00 00 00 00 00 03 00 08 00:00:00.000 READ LOG EXT + 2f 00 00 01 01 00 00 00 00 00 00 00 08 00:00:00.000 READ LOG EXT + b0 00 d5 01 01 00 00 4f 00 c2 00 00 08 00:00:00.000 SMART READ LOG + b0 00 da 00 00 00 00 4f 00 c2 00 00 08 00:00:00.000 SMART RETURN STATUS + +Error 32 [3] log entry is empty +Error 31 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 d0 00 00 33 00 8b 78 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 08 01 d0 00 00 33 00 8b 78 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 08 01 d0 00 00 33 00 8b 78 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 08 01 d0 00 00 33 00 8b 78 00 00 00:00:00.000 READ FPDMA QUEUED + 60 00 08 01 d0 00 00 33 00 8b 78 00 00 00:00:00.000 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5810 - +# 2 Extended offline Completed without error 00% 5180 - +# 3 Extended offline Completed without error 00% 5095 - +# 4 Extended offline Completed without error 00% 4976 - +# 5 Short offline Completed without error 00% 4731 - +# 6 Extended offline Completed without error 00% 1741 - +# 7 Short offline Completed without error 00% 1741 - +# 8 Short offline Completed without error 00% 13 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1864 --- Lifetime Power-On Resets +0x01 0x010 4 12330 --- Power-on Hours +0x01 0x018 6 1526615852 --- Logical Sectors Written +0x01 0x020 6 456303491 --- Number of Write Commands +0x01 0x028 6 2047331168 --- Logical Sectors Read +0x01 0x030 6 378996891 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 17 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/195D7858D595 b/SSD/Crucial/CT240/CT240BX500SSD1/195D7858D595 new file mode 100644 index 000000000..0f612b958 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/195D7858D595 @@ -0,0 +1,144 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 5 08:08:01 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 23072 + 12 Power_Cycle_Count -O--CK 100 100 050 - 3525 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 170 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 7 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 066 038 050 Past 34 (Min/Max 24/62) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 089 089 001 - 89 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 33753208752 +247 Host_Program_Page_Count -O--CK 100 100 050 - 1054787773 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 883593216 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3525 --- Lifetime Power-On Resets +0x01 0x010 4 23072 --- Power-on Hours +0x01 0x018 6 3688437680 --- Logical Sectors Written +0x01 0x020 6 529728539 --- Number of Write Commands +0x01 0x028 6 3776224308 --- Logical Sectors Read +0x01 0x030 6 182348516 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 17 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 99 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/1963B10575C8 b/SSD/Crucial/CT240/CT240BX500SSD1/1963B10575C8 new file mode 100644 index 000000000..a2657e3cf --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/1963B10575C8 @@ -0,0 +1,133 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 24 00:53:00 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 000 000 010 NOW 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6501 + 12 Power_Cycle_Count -O--CK 100 100 000 - 17 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 081 081 000 - 197 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 13 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 0 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 051 000 - 40 (Min/Max 32/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 435 +202 Percent_Lifetime_Remain ----CK 081 081 001 - 19 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 20544386139 +247 Host_Program_Page_Count -O--CK 100 100 000 - 642012066 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3050133504 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2065747468 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 11 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 35 Command failed due to ICRC error +0x0002 4 35 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 49 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/21F2DBC8E2A5 b/SSD/Crucial/CT240/CT240BX500SSD1/21F2DBC8E2A5 new file mode 100644 index 000000000..341c2033e --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/21F2DBC8E2A5 @@ -0,0 +1,134 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 09:16:53 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 243) Self-test routine in progress... + 30% of test remaining. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9427 + 12 Power_Cycle_Count -O--CK 100 100 000 - 111 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 094 094 000 - 69 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 73 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 43 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 057 000 - 42 (Min/Max 21/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 7 +202 Percent_Lifetime_Remain ----CK 094 094 001 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 15242230052 +247 Host_Program_Page_Count -O--CK 100 100 000 - 476319689 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 496752992 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2912982698 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 155 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/3351192A8538 b/SSD/Crucial/CT240/CT240BX500SSD1/3351192A8538 new file mode 100644 index 000000000..1ccf0efac --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/3351192A8538 @@ -0,0 +1,180 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 25 13:07:57 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 8465 + 12 Power_Cycle_Count -O--CK 100 100 050 - 68367 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 211 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 66282 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 059 022 050 Past 41 (Min/Max 11/78) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 2 +202 Percent_Lifetime_Remain ----CK 086 086 001 - 86 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 38410823632 +247 Host_Program_Page_Count -O--CK 100 100 050 - 1200338238 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 1620876928 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 6 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 6 [1] log entry is empty +Error 5 [0] log entry is empty +Error 4 [3] log entry is empty +Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ DATA + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 68367 --- Lifetime Power-On Resets +0x01 0x010 4 8465 --- Power-on Hours +0x01 0x018 6 4051085264 --- Logical Sectors Written +0x01 0x020 6 431384779 --- Number of Write Commands +0x01 0x028 6 3172529982 --- Logical Sectors Read +0x01 0x030 6 837349899 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 23 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 0 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/35A3C11CD678 b/SSD/Crucial/CT240/CT240BX500SSD1/35A3C11CD678 new file mode 100644 index 000000000..63497c491 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/35A3C11CD678 @@ -0,0 +1,177 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 25 20:20:10 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6942 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1856 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 119 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 664 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 1 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 050 021 050 NOW 50 (Min/Max 28/79) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 534 +202 Percent_Lifetime_Remain ----CK 093 093 001 - 93 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 17099555313 +247 Host_Program_Page_Count -O--CK 100 100 050 - 534361103 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 336678240 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1041 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1041 [0] log entry is empty +Error 1040 [3] log entry is empty +Error 1039 [2] log entry is empty +Error 1038 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ DATA + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 60 00 10 f8 f8 00 11 df 00 50 b0 40 08 00:00:00.000 READ FPDMA QUEUED + b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1856 --- Lifetime Power-On Resets +0x01 0x010 4 6942 --- Power-on Hours +0x01 0x018 6 4214653425 --- Logical Sectors Written +0x01 0x020 6 169765083 --- Number of Write Commands +0x01 0x028 6 3376160811 --- Logical Sectors Read +0x01 0x030 6 146939262 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/360BF358E720 b/SSD/Crucial/CT240/CT240BX500SSD1/360BF358E720 new file mode 100644 index 000000000..559706256 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/360BF358E720 @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue May 20 16:20:19 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1736 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 17 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 21 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 12 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 061 058 000 - 39 (Min/Max 33/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 3881259306 +247 Host_Program_Page_Count -O--CK 100 100 000 - 121289353 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 31763024 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1117854810 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 71 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/5737E16E4864 b/SSD/Crucial/CT240/CT240BX500SSD1/5737E16E4864 new file mode 100644 index 000000000..7218484d0 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/5737E16E4864 @@ -0,0 +1,179 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 8 09:17:02 2025 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6589 + 12 Power_Cycle_Count -O--CK 100 100 050 - 724 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 95 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 292 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 061 026 050 Past 39 (Min/Max 23/74) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 3 +202 Percent_Lifetime_Remain ----CK 094 094 001 - 94 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 11737484788 +247 Host_Program_Page_Count -O--CK 100 100 050 - 366796399 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 400166176 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 499 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 499 [2] log entry is empty +Error 498 [1] log entry is empty +Error 497 [0] log entry is empty +Error 496 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 a0 a0 00 11 04 00 0f 00 40 08 00:00:00.000 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 60 00 38 a8 a8 00 10 e7 00 f2 b0 40 08 00:00:00.000 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6522 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 724 --- Lifetime Power-On Resets +0x01 0x010 4 6589 --- Power-on Hours +0x01 0x018 6 3147550196 --- Logical Sectors Written +0x01 0x020 6 147870275 --- Number of Write Commands +0x01 0x028 6 1007912168 --- Logical Sectors Read +0x01 0x030 6 131849424 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 39 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/6A9E83703454 b/SSD/Crucial/CT240/CT240BX500SSD1/6A9E83703454 new file mode 100644 index 000000000..1cff775e4 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/6A9E83703454 @@ -0,0 +1,133 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 12 12:39:59 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 16251 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 092 092 000 - 80 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 075 060 000 - 25 (Min/Max 14/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 092 092 001 - 8 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 14857689329 +247 Host_Program_Page_Count -O--CK 100 100 000 - 464302791 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 101274624 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3268739655 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 56 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 151 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/6F51A90364E8 b/SSD/Crucial/CT240/CT240BX500SSD1/6F51A90364E8 new file mode 100644 index 000000000..82fd04e18 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/6F51A90364E8 @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Sep 4 19:20:03 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3917 + 12 Power_Cycle_Count -O--CK 100 100 000 - 243 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 46 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 154 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 39 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 055 048 000 - 45 (Min/Max 23/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 10474129108 +247 Host_Program_Page_Count -O--CK 100 100 000 - 327316534 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 348250448 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 449941681 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/7B3FD61F4E7F b/SSD/Crucial/CT240/CT240BX500SSD1/7B3FD61F4E7F new file mode 100644 index 000000000..fb29b5626 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/7B3FD61F4E7F @@ -0,0 +1,134 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 22 14:50:37 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8285 + 12 Power_Cycle_Count -O--CK 100 100 000 - 44 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 24 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 29 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 053 000 - 40 (Min/Max 21/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 3373001856 +247 Host_Program_Page_Count -O--CK 100 100 000 - 105406308 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 60745792 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3933521711 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 20 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 190 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 30% 5112 - +# 2 Short offline Completed without error 00% 5112 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/7C904FE6DA44 b/SSD/Crucial/CT240/CT240BX500SSD1/7C904FE6DA44 new file mode 100644 index 000000000..7fed86c98 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/7C904FE6DA44 @@ -0,0 +1,96 @@ +smartctl 7.5 2025-04-30 r5714 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 7 19:23:49 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 18374 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 3241 +171 Program_Fail_Count 0x0032 100 100 050 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 050 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 100 100 050 Old_age Always - 304 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 050 Old_age Always - 407 +180 Unused_Reserve_NAND_Blk 0x0032 100 100 050 Old_age Always - 100 +183 SATA_Interfac_Downshift 0x0032 100 100 050 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 050 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 050 Old_age Always - 0 +194 Temperature_Celsius 0x0022 063 020 050 Old_age Always In_the_past 37 (Min/Max 14/80) +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_ECC_Cnt 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 050 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 080 080 001 Old_age Offline - 80 +206 Write_Error_Rate 0x002e 100 100 050 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 050 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 050 Old_age Always - 99919310649 +247 Host_Program_Page_Count 0x0032 100 100 050 Old_age Always - 3122478457 +248 FTL_Program_Page_Count 0x0032 100 100 050 Old_age Always - 3052576688 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1411 - +# 2 Extended offline Completed without error 00% 1411 - + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/9A19A1626155 b/SSD/Crucial/CT240/CT240BX500SSD1/9A19A1626155 new file mode 100644 index 000000000..7bc6082a1 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/9A19A1626155 @@ -0,0 +1,143 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 16 17:25:20 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2453 + 12 Power_Cycle_Count -O--CK 100 100 050 - 955 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 85 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 44 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 059 032 050 Past 41 (Min/Max 28/68) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 095 095 001 - 95 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 9478737919 +247 Host_Program_Page_Count -O--CK 100 100 050 - 296210559 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 399678368 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 955 --- Lifetime Power-On Resets +0x01 0x010 4 2453 --- Power-on Hours +0x01 0x018 6 888803327 --- Logical Sectors Written +0x01 0x020 6 172627647 --- Number of Write Commands +0x01 0x028 6 624738559 --- Logical Sectors Read +0x01 0x030 6 667741491 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/9FEF85FFB664 b/SSD/Crucial/CT240/CT240BX500SSD1/9FEF85FFB664 new file mode 100644 index 000000000..3376e0059 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/9FEF85FFB664 @@ -0,0 +1,133 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 10 13:18:23 2025 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2869 + 12 Power_Cycle_Count -O--CK 100 100 000 - 372 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 093 093 000 - 78 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 52 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 36 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 033 000 - 38 (Min/Max 24/67) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2 +202 Percent_Lifetime_Remain ----CK 093 093 001 - 7 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 13819313572 +247 Host_Program_Page_Count -O--CK 100 100 000 - 431853549 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1240206752 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 4143479001 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 7 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 14 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1631 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/A0F4E61BE893 b/SSD/Crucial/CT240/CT240BX500SSD1/A0F4E61BE893 new file mode 100644 index 000000000..8c5e0ec9a --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/A0F4E61BE893 @@ -0,0 +1,143 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR054 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Dec 15 18:49:41 2025 -04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 16786 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2588 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 059 059 000 - 416 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1007 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 051 000 - 40 (Min/Max 20/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 34 +202 Percent_Lifetime_Remain ----CK 059 059 001 - 41 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 84091109022 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2627847156 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3502552480 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 586264565 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 29 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 280 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 14523 - +# 2 Short offline Aborted by host 90% 14523 - +# 3 Short offline Aborted by host 90% 14523 - +# 4 Extended offline Aborted by host 90% 13100 - +# 5 Extended offline Aborted by host 90% 13100 - +# 6 Extended offline Aborted by host 90% 13100 - +# 7 Short offline Aborted by host 90% 13100 - +# 8 Short offline Aborted by host 90% 13100 - +# 9 Short offline Aborted by host 90% 13100 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/A26CF54CAB37 b/SSD/Crucial/CT240/CT240BX500SSD1/A26CF54CAB37 new file mode 100644 index 000000000..0e37f3de3 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/A26CF54CAB37 @@ -0,0 +1,133 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 6 11:30:10 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 53 + 12 Power_Cycle_Count -O--CK 100 100 000 - 21 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 14 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 20 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 063 062 000 - 37 (Min/Max 31/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 12192888 +247 Host_Program_Page_Count -O--CK 100 100 000 - 381027 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 0 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 5666101 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/A49A789FAB52 b/SSD/Crucial/CT240/CT240BX500SSD1/A49A789FAB52 new file mode 100644 index 000000000..216461249 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/A49A789FAB52 @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR022 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 3 18:29:52 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 000 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8197 + 12 Power_Cycle_Count -O--CK 100 100 000 - 713 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +173 Ave_Block-Erase_Count -O--CK 034 034 000 - 694 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 255 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 228 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 031 000 - 33 (Min/Max 12/69) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 066 066 001 - 34 +206 Write_Error_Rate -OSR-- 000 000 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 63170120859 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1974066276 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 6065665600 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 521 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 713 --- Lifetime Power-On Resets +0x01 0x010 4 8197 --- Power-on Hours +0x01 0x018 6 3040578715 --- Logical Sectors Written +0x01 0x020 6 462642744 --- Number of Write Commands +0x01 0x028 6 1581477536 --- Logical Sectors Read +0x01 0x030 6 98163082 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/D474195FCDBC b/SSD/Crucial/CT240/CT240BX500SSD1/D474195FCDBC new file mode 100644 index 000000000..9f745f405 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/D474195FCDBC @@ -0,0 +1,152 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.5-RELEASE i386] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR041 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sat Aug 30 16:42:51 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 637 + 12 Power_Cycle_Count -O--CK 100 100 000 - 540 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 24 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 90 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 36 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 051 039 000 - 49 (Min/Max 17/61) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 4572913497 +247 Host_Program_Page_Count -O--CK 100 100 000 - 142903546 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 117223232 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1051290019 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 266 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 309 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 115 - +# 2 Extended offline Completed without error 00% 110 - +# 3 Short offline Completed without error 00% 109 - +# 4 Short offline Completed without error 00% 105 - +# 5 Extended offline Completed without error 00% 101 - +# 6 Short offline Completed without error 00% 101 - +# 7 Short offline Completed without error 00% 99 - +# 8 Short offline Completed without error 00% 99 - +# 9 Short offline Completed without error 00% 96 - +#10 Short offline Completed without error 00% 92 - +#11 Short offline Completed without error 00% 78 - +#12 Extended offline Completed without error 00% 73 - +#13 Short offline Completed without error 00% 73 - +#14 Short offline Completed without error 00% 73 - +#15 Short offline Completed without error 00% 71 - +#16 Short offline Completed without error 00% 71 - +#17 Extended offline Completed without error 00% 68 - +#18 Short offline Completed without error 00% 68 - +#19 Short offline Completed without error 00% 67 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/D83E28366B7F b/SSD/Crucial/CT240/CT240BX500SSD1/D83E28366B7F new file mode 100644 index 000000000..4a7e1c48c --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/D83E28366B7F @@ -0,0 +1,134 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 28 23:34:55 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7474 + 12 Power_Cycle_Count -O--CK 100 100 000 - 141 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 23 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 59 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 13 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 076 059 000 - 24 (Min/Max 17/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 3133801883 +247 Host_Program_Page_Count -O--CK 100 100 000 - 97931308 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 117156864 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2660530508 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/D960A763F16C b/SSD/Crucial/CT240/CT240BX500SSD1/D960A763F16C new file mode 100644 index 000000000..6e4707194 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/D960A763F16C @@ -0,0 +1,197 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 19 17:44:52 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 15674 + 12 Power_Cycle_Count -O--CK 100 100 050 - 350 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 140 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 124 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 053 016 050 Past 47 (Min/Max 20/84) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 7 +202 Percent_Lifetime_Remain ----CK 091 091 001 - 91 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 22260991738 +247 Host_Program_Page_Count -O--CK 100 100 050 - 695655991 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 885515936 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 7 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 7 [2] log entry is empty +Error 6 [1] log entry is empty +Error 5 [0] log entry is empty +Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 38 38 00 09 b9 00 2e a8 40 08 00:00:00.000 READ FPDMA QUEUED + b0 00 d0 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ DATA + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 61 00 06 10 10 00 00 c9 00 08 7e 40 08 00:00:00.000 WRITE FPDMA QUEUED + 60 00 18 98 98 00 09 24 00 bd a8 40 08 00:00:00.000 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9797 - +# 2 Short offline Completed without error 00% 9784 - +# 3 Short offline Completed without error 00% 9760 - +# 4 Short offline Completed without error 00% 9736 - +# 5 Short offline Completed without error 00% 9712 - +# 6 Short offline Completed without error 00% 9689 - +# 7 Short offline Completed without error 00% 9665 - +# 8 Short offline Completed without error 00% 9641 - +# 9 Short offline Interrupted (host reset) 90% 9617 - +#10 Short offline Completed without error 00% 9593 - +#11 Short offline Completed without error 00% 9570 - +#12 Short offline Completed without error 00% 9546 - +#13 Short offline Interrupted (host reset) 40% 9522 - +#14 Short offline Completed without error 00% 9498 - +#15 Short offline Completed without error 00% 9474 - +#16 Short offline Completed without error 00% 9451 - +#17 Short offline Completed without error 00% 9427 - +#18 Short offline Completed without error 00% 9403 - +#19 Short offline Completed without error 00% 9379 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 350 --- Lifetime Power-On Resets +0x01 0x010 4 15674 --- Power-on Hours +0x01 0x018 6 786155258 --- Logical Sectors Written +0x01 0x020 6 460160416 --- Number of Write Commands +0x01 0x028 6 1363560586 --- Logical Sectors Read +0x01 0x030 6 103814241 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/E2D917060D9D b/SSD/Crucial/CT240/CT240BX500SSD1/E2D917060D9D new file mode 100644 index 000000000..186f74e0d --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/E2D917060D9D @@ -0,0 +1,134 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 7 23:25:49 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3616 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 19 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 44 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 054 047 000 - 46 (Min/Max 26/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 0 +247 Host_Program_Page_Count -O--CK 100 100 000 - 0 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 0 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 44096531 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/E80006BBA3A1 b/SSD/Crucial/CT240/CT240BX500SSD1/E80006BBA3A1 new file mode 100644 index 000000000..0c7ba68c1 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/E80006BBA3A1 @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Nov 15 18:22:50 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 221 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 19 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 7 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 050 049 000 - 50 (Min/Max 35/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 240041261 +247 Host_Program_Page_Count -O--CK 100 100 000 - 7501289 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1317888 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 86276782 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/E850120FA071 b/SSD/Crucial/CT240/CT240BX500SSD1/E850120FA071 new file mode 100644 index 000000000..1cf4217d6 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/E850120FA071 @@ -0,0 +1,133 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 16 05:45:45 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 236 + 12 Power_Cycle_Count -O--CK 100 100 000 - 804 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 095 095 000 - 51 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 463 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 2 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 23 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 041 038 000 - 59 (Min/Max 18/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 095 095 001 - 5 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 7735091241 +247 Host_Program_Page_Count -O--CK 100 100 000 - 241721601 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 143469920 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2533558017 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/EB4F5A236712 b/SSD/Crucial/CT240/CT240BX500SSD1/EB4F5A236712 new file mode 100644 index 000000000..29e7c09b2 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/EB4F5A236712 @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 28 23:34:55 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7522 + 12 Power_Cycle_Count -O--CK 100 100 000 - 141 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 23 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 59 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 42 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 077 060 000 - 23 (Min/Max 17/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 3547062085 +247 Host_Program_Page_Count -O--CK 100 100 000 - 110845690 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 96978000 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2522742660 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/FA56606FDD69 b/SSD/Crucial/CT240/CT240BX500SSD1/FA56606FDD69 new file mode 100644 index 000000000..f17474632 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/FA56606FDD69 @@ -0,0 +1,133 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR054 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 6 11:05:56 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27884 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 093 093 000 - 73 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 13 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 26 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 058 000 - 34 (Min/Max 26/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 093 093 001 - 7 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 12918054473 +247 Host_Program_Page_Count -O--CK 100 100 000 - 403689202 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 95766528 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3436494283 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 373 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/FA96BA4C19FB b/SSD/Crucial/CT240/CT240BX500SSD1/FA96BA4C19FB new file mode 100644 index 000000000..90acbbe77 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/FA96BA4C19FB @@ -0,0 +1,136 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 2 17:28:25 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 343 + 12 Power_Cycle_Count -O--CK 100 100 000 - 501 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 25 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 397 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 3 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 16 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 054 000 - 33 (Min/Max 21/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1244 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 3741813341 +247 Host_Program_Page_Count -O--CK 100 100 000 - 116931666 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 81572992 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3380212361 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 342 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240M500SSD1/BA5349959DE1 b/SSD/Crucial/CT240/CT240M500SSD1/BA5349959DE1 new file mode 100644 index 000000000..44802e2ca --- /dev/null +++ b/SSD/Crucial/CT240/CT240M500SSD1/BA5349959DE1 @@ -0,0 +1,219 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT240M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 31 16:14:40 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 545) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 18) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9590 + 12 Power_Cycle_Count -O--CK 100 100 000 - 641 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 24 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 150 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 4066 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 054 000 - 40 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 100 100 000 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 5025473868 +247 Host_Program_Page_Count -O--CK 100 100 --- - 158734137 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 232083882 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 9590 - +# 2 Vendor (0xff) Completed without error 00% 3957 - +# 3 Vendor (0xff) Completed without error 00% 3758 - +# 4 Vendor (0xff) Completed without error 00% 2303 - +# 5 Vendor (0xff) Completed without error 00% 2291 - +# 6 Vendor (0xff) Completed without error 00% 2257 - +# 7 Vendor (0xff) Completed without error 00% 2186 - +# 8 Vendor (0xff) Completed without error 00% 2167 - +# 9 Vendor (0xff) Completed without error 00% 2145 - +#10 Vendor (0xff) Completed without error 00% 2126 - +#11 Vendor (0xff) Completed without error 00% 2104 - +#12 Vendor (0xff) Completed without error 00% 2085 - +#13 Vendor (0xff) Completed without error 00% 2065 - +#14 Vendor (0xff) Completed without error 00% 2045 - +#15 Vendor (0xff) Completed without error 00% 2024 - +#16 Vendor (0xff) Completed without error 00% 2006 - +#17 Vendor (0xff) Completed without error 00% 1987 - +#18 Vendor (0xff) Completed without error 00% 1969 - +#19 Vendor (0xff) Completed without error 00% 1951 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 24/40 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (455) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 641 --- Lifetime Power-On Resets +0x01 0x010 4 9590 --- Power-on Hours +0x01 0x018 6 5025473868 --- Logical Sectors Written +0x01 0x020 6 65331866 --- Number of Write Commands +0x01 0x028 6 4064300370 --- Logical Sectors Read +0x01 0x030 6 36827122 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 501 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT240/CT240M500SSD1/E6340639EC0B b/SSD/Crucial/CT240/CT240M500SSD1/E6340639EC0B new file mode 100644 index 000000000..7bac394ea --- /dev/null +++ b/SSD/Crucial/CT240/CT240M500SSD1/E6340639EC0B @@ -0,0 +1,217 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT240M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 1 04:09:03 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1115) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 18) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 --- - 729 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 --- - 753664 + 9 Power_On_Hours -O--CK 100 100 --- - 39769 + 12 Power_Cycle_Count -O--CK 100 100 --- - 80 +170 Reserved_Block_Count -O--CK 100 100 --- - 62 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 --- - 111 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 47 +181 Program_Fail_Cnt_Total -O---K 100 100 --- - 19267365701897 +183 SATA_Interfac_Downshift -O--CK 100 100 --- - 0 +184 Error_Correction_Count -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 64 +194 Temperature_Celsius -O---K 066 239 --- - 34 (0 117 255 151 0) +195 Cumulativ_Corrected_ECC -O-RCK 100 100 --- - 4294967295 +196 Reallocated_Event_Count -O--CK 100 100 --- - 62 +197 Current_Pending_ECC_Cnt -O--CK 100 100 --- - 0 +198 Offline_Uncorrectable ----CK 100 100 --- - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +202 Percent_Lifetime_Remain P---CK 097 097 --- - 3 +206 Write_Error_Rate -OSR-- 100 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 29688 - +# 2 Vendor (0xff) Completed without error 00% 27111 - +# 3 Vendor (0xff) Completed without error 00% 24971 - +# 4 Vendor (0xff) Completed without error 00% 24935 - +# 5 Vendor (0xff) Completed without error 00% 24917 - +# 6 Vendor (0xff) Completed without error 00% 24899 - +# 7 Vendor (0xff) Completed without error 00% 24883 - +# 8 Vendor (0xff) Completed without error 00% 24871 - +# 9 Vendor (0xff) Completed without error 00% 24859 - +#10 Vendor (0xff) Completed without error 00% 24842 - +#11 Vendor (0xff) Completed without error 00% 24824 - +#12 Vendor (0xff) Completed without error 00% 24803 - +#13 Vendor (0xff) Completed without error 00% 24785 - +#14 Vendor (0xff) Completed without error 00% 24767 - +#15 Vendor (0xff) Completed without error 00% 24749 - +#16 Vendor (0xff) Completed without error 00% 24732 - +#17 Vendor (0xff) Completed without error 00% 24713 - +#18 Vendor (0xff) Completed without error 00% 24691 - +#19 Vendor (0xff) Completed without error 00% 24670 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 30/48 Celsius +Lifetime Min/Max Temperature: 30/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (173) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 80 --- Lifetime Power-On Resets +0x01 0x010 4 39769 --- Power-on Hours +0x01 0x018 6 20223895931 --- Logical Sectors Written +0x01 0x020 6 580872894 --- Number of Write Commands +0x01 0x028 6 47064532327 --- Logical Sectors Read +0x01 0x030 6 736810665 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 64 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 123 --- Highest Temperature +0x05 0x028 1 -111 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 51 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 112 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 94 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT250/CT250BX100SSD1/93010E22C964 b/SSD/Crucial/CT250/CT250BX100SSD1/93010E22C964 new file mode 100644 index 000000000..065143c48 --- /dev/null +++ b/SSD/Crucial/CT250/CT250BX100SSD1/93010E22C964 @@ -0,0 +1,196 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CT250BX100SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 12 14:35:34 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 2756 + 12 Power_Cycle_Count ------ 100 100 000 - 245 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 65 +163 Initial_Bad_Block_Count ------ 100 100 000 - 26 +164 Total_Erase_Count ------ 100 100 000 - 280025 +165 Max_Erase_Count ------ 100 100 000 - 322 +166 Min_Erase_Count ------ 100 100 000 - 226 +167 Average_Erase_Count ------ 100 100 000 - 273 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 2000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 89 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 000 - 608 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 141 +194 Temperature_Celsius ------ 100 100 000 - 25 +195 Hardware_ECC_Recovered ------ 100 100 000 - 916 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 1977988 +242 Host_Reads_32MiB ------ 100 100 000 - 527994 +245 TLC_Writes_32MiB ------ 100 100 000 - 2240200 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 64 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 25/27 Celsius +Lifetime Min/Max Temperature: 0/32 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (102) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 245 --- Lifetime Power-On Resets +0x01 0x010 4 2756 --- Power-on Hours +0x01 0x018 6 780459721 --- Logical Sectors Written +0x01 0x020 6 919476914 --- Number of Write Commands +0x01 0x028 6 242930232 --- Logical Sectors Read +0x01 0x030 6 419153878 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 141 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 572 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250BX100SSD1/C57AF24BCF55 b/SSD/Crucial/CT250/CT250BX100SSD1/C57AF24BCF55 new file mode 100644 index 000000000..a7d5f181d --- /dev/null +++ b/SSD/Crucial/CT250/CT250BX100SSD1/C57AF24BCF55 @@ -0,0 +1,196 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CT250BX100SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 27 22:05:59 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 4825 + 12 Power_Cycle_Count ------ 100 100 000 - 3569 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 63 +163 Initial_Bad_Block_Count ------ 100 100 000 - 28 +164 Total_Erase_Count ------ 100 100 000 - 448517 +165 Max_Erase_Count ------ 100 100 000 - 494 +166 Min_Erase_Count ------ 100 100 000 - 394 +167 Average_Erase_Count ------ 100 100 000 - 440 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 2000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 81 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 000 - 2343 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 59 +194 Temperature_Celsius ------ 100 100 000 - 34 +195 Hardware_ECC_Recovered ------ 100 100 000 - 310753 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 1168892 +242 Host_Reads_32MiB ------ 100 100 000 - 667389 +245 TLC_Writes_32MiB ------ 100 100 000 - 3588136 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 64 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 33/37 Celsius +Lifetime Min/Max Temperature: 0/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3569 --- Lifetime Power-On Resets +0x01 0x010 4 4825 --- Power-on Hours +0x01 0x018 6 3590083768 --- Logical Sectors Written +0x01 0x020 6 1255124859 --- Number of Write Commands +0x01 0x028 6 788395670 --- Logical Sectors Read +0x01 0x030 6 684134857 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 112 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 30356 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 22 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250BX100SSD1/E365DE85D58A b/SSD/Crucial/CT250/CT250BX100SSD1/E365DE85D58A new file mode 100644 index 000000000..9934dad75 --- /dev/null +++ b/SSD/Crucial/CT250/CT250BX100SSD1/E365DE85D58A @@ -0,0 +1,201 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CT250BX100SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sun Jun 1 13:41:22 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 11334 + 12 Power_Cycle_Count ------ 100 100 000 - 159 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 62 +163 Initial_Bad_Block_Count ------ 100 100 000 - 29 +164 Total_Erase_Count ------ 100 100 000 - 124387 +165 Max_Erase_Count ------ 100 100 000 - 157 +166 Min_Erase_Count ------ 100 100 000 - 60 +167 Average_Erase_Count ------ 100 100 000 - 120 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 2000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 97 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 000 - 585 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 65 +194 Temperature_Celsius ------ 100 100 000 - 31 +195 Hardware_ECC_Recovered ------ 100 100 000 - 3768297 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 1 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 399897 +242 Host_Reads_32MiB ------ 100 100 000 - 563629 +245 TLC_Writes_32MiB ------ 100 100 000 - 995096 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 64 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 4719 - +# 2 Offline Completed without error 00% 4719 - +# 3 Short offline Completed without error 00% 4673 - +# 4 Short offline Completed without error 00% 4673 - +# 5 Short offline Completed without error 00% 4671 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 21/35 Celsius +Lifetime Min/Max Temperature: 0/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 159 --- Lifetime Power-On Resets +0x01 0x010 4 11334 --- Power-on Hours +0x01 0x018 6 437901439 --- Logical Sectors Written +0x01 0x020 6 901000745 --- Number of Write Commands +0x01 0x028 6 2578310033 --- Logical Sectors Read +0x01 0x030 6 625106393 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 66 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1513 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX200SSD1/AFA382DA6F05 b/SSD/Crucial/CT250/CT250MX200SSD1/AFA382DA6F05 new file mode 100644 index 000000000..89c131d2e --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX200SSD1/AFA382DA6F05 @@ -0,0 +1,219 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT250MX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU01 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 08:45:14 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 795) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 43998 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2715 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 091 091 000 - 295 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 280 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2587 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 89 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 044 000 - 34 (Min/Max 15/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 13 +202 Percent_Lifetime_Remain P---CK 091 091 000 - 9 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 36869047325 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1153019643 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1812221852 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 42122 - +# 2 Vendor (0xff) Completed without error 00% 42076 - +# 3 Vendor (0xff) Completed without error 00% 42029 - +# 4 Vendor (0xff) Completed without error 00% 41970 - +# 5 Vendor (0xff) Completed without error 00% 41927 - +# 6 Vendor (0xff) Completed without error 00% 41881 - +# 7 Vendor (0xff) Completed without error 00% 41810 - +# 8 Extended offline Completed without error 00% 40949 - +# 9 Vendor (0xff) Completed without error 00% 40546 - +#10 Vendor (0xff) Completed without error 00% 40496 - +#11 Vendor (0xff) Completed without error 00% 40424 - +#12 Vendor (0xff) Completed without error 00% 40411 - +#13 Vendor (0xff) Completed without error 00% 40350 - +#14 Vendor (0xff) Completed without error 00% 40299 - +#15 Vendor (0xff) Completed without error 00% 40254 - +#16 Vendor (0xff) Completed without error 00% 40181 - +#17 Vendor (0xff) Completed without error 00% 40153 - +#18 Vendor (0xff) Completed without error 00% 40108 - +#19 Vendor (0xff) Completed without error 00% 40061 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 26/36 Celsius +Lifetime Min/Max Temperature: 15/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (470) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2715 --- Lifetime Power-On Resets +0x01 0x010 4 43998 --- Power-on Hours +0x01 0x018 6 36869047325 --- Logical Sectors Written +0x01 0x020 6 401767941 --- Number of Write Commands +0x01 0x028 6 31283824641 --- Logical Sectors Read +0x01 0x030 6 256001319 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5727 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 53 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 48 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13924 --- Number of Hardware Resets +0x06 0x010 4 1263 --- Number of ASR Events +0x06 0x018 4 13 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/16D7144C002D b/SSD/Crucial/CT250/CT250MX500SSD1/16D7144C002D new file mode 100644 index 000000000..ac5505ff3 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/16D7144C002D @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR010 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 25 10:38:33 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 41609 + 12 Power_Cycle_Count -O--CK 100 100 000 - 8 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 066 066 000 - 523 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 28 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 054 000 - 36 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 066 066 001 - 34 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 11687598127 +247 Host_Program_Page_Count -O--CK 100 100 000 - 252790571 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4131221677 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 30/46 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 8 --- Lifetime Power-On Resets +0x01 0x010 4 41609 --- Power-on Hours +0x01 0x018 6 3097663535 --- Logical Sectors Written +0x01 0x020 6 1338220835 --- Number of Write Commands +0x01 0x028 6 231744926 --- Logical Sectors Read +0x01 0x030 6 2482444902 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 73 --- Number of Hardware Resets +0x06 0x010 4 12 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/223EE1471E36 b/SSD/Crucial/CT250/CT250MX500SSD1/223EE1471E36 new file mode 100644 index 000000000..4ea46f429 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/223EE1471E36 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 10 08:33:59 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 22357 + 12 Power_Cycle_Count -O--CK 100 100 000 - 52 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 050 050 000 - 755 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 16 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 33 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 046 000 - 33 (Min/Max 0/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 050 050 001 - 50 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 51567154108 +247 Host_Program_Page_Count -O--CK 100 100 000 - 883579014 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4405267120 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 19/42 Celsius +Lifetime Min/Max Temperature: 0/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (10) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 22357 --- Power-on Hours +0x01 0x018 6 27546556 --- Logical Sectors Written +0x01 0x020 6 621211391 --- Number of Write Commands +0x01 0x028 6 360444309 --- Logical Sectors Read +0x01 0x030 6 9441098 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 16 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 35 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 810 --- Number of Hardware Resets +0x06 0x010 4 71 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 50 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/32BE155C38E0 b/SSD/Crucial/CT250/CT250MX500SSD1/32BE155C38E0 new file mode 100644 index 000000000..87e80cc1f --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/32BE155C38E0 @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR010 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 25 10:38:33 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46915 + 12 Power_Cycle_Count -O--CK 100 100 000 - 10 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 079 079 000 - 327 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 051 000 - 38 (Min/Max 0/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 079 079 001 - 21 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 10812575662 +247 Host_Program_Page_Count -O--CK 100 100 000 - 989637153 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1830531144 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 29/46 Celsius +Lifetime Min/Max Temperature: 0/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (113) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 46915 --- Power-on Hours +0x01 0x018 6 2222641070 --- Logical Sectors Written +0x01 0x020 6 404373638 --- Number of Write Commands +0x01 0x028 6 2486373772 --- Logical Sectors Read +0x01 0x030 6 36979731 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 132 --- Number of Hardware Resets +0x06 0x010 4 20 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/5208B3581192 b/SSD/Crucial/CT250/CT250MX500SSD1/5208B3581192 new file mode 100644 index 000000000..2622734d7 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/5208B3581192 @@ -0,0 +1,220 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 28 05:24:41 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2735 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3298 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 094 094 000 - 90 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 99 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 28 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 045 000 - 36 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 094 094 001 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 13872146428 +247 Host_Program_Page_Count -O--CK 100 100 000 - 240199766 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 139658589 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1511 - +# 2 Short offline Completed without error 00% 1508 - +# 3 Short offline Completed without error 00% 1507 - +# 4 Extended offline Completed without error 00% 1506 - +# 5 Extended offline Completed without error 00% 924 - +# 6 Conveyance offline Completed without error 00% 923 - +# 7 Short offline Completed without error 00% 923 - +# 8 Short offline Completed without error 00% 659 - +# 9 Short offline Completed without error 00% 423 - +#10 Short captive Completed without error 00% 422 - +#11 Short offline Completed without error 00% 273 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 23/36 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (65535) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3298 --- Lifetime Power-On Resets +0x01 0x010 4 2735 --- Power-on Hours +0x01 0x018 6 987244540 --- Logical Sectors Written +0x01 0x020 6 258557785 --- Number of Write Commands +0x01 0x028 6 1563874431 --- Logical Sectors Read +0x01 0x030 6 276957010 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 99 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 149999 --- Number of Hardware Resets +0x06 0x010 4 8814 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/5545240CCB7A b/SSD/Crucial/CT250/CT250MX500SSD1/5545240CCB7A new file mode 100644 index 000000000..a7f243f4d --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/5545240CCB7A @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 9 15:36:39 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 25012 + 12 Power_Cycle_Count -O--CK 100 100 000 - 50 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 086 086 000 - 186 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 13 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 077 063 000 - 23 (Min/Max 0/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 086 086 001 - 14 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 16426019197 +247 Host_Program_Page_Count -O--CK 100 100 000 - 161062076 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 378212271 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 20/34 Celsius +Lifetime Min/Max Temperature: 0/37 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (81) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 25012 --- Power-on Hours +0x01 0x018 6 3541117309 --- Logical Sectors Written +0x01 0x020 6 502394750 --- Number of Write Commands +0x01 0x028 6 51375764 --- Logical Sectors Read +0x01 0x030 6 2754610 --- Number of Read Commands +0x01 0x038 6 4145950159 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 13 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 227 --- Number of Hardware Resets +0x06 0x010 4 63 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 21 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/65D8238C6955 b/SSD/Crucial/CT250/CT250MX500SSD1/65D8238C6955 new file mode 100644 index 000000000..975d73441 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/65D8238C6955 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 24 17:43:49 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4442 + 12 Power_Cycle_Count -O--CK 100 100 000 - 104 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 35 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 057 052 000 - 43 (Min/Max 0/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 105359100 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1912832 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3844204 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 30/48 Celsius +Lifetime Min/Max Temperature: 0/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (4) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 104 --- Lifetime Power-On Resets +0x01 0x010 4 4442 --- Power-on Hours +0x01 0x018 6 105359100 --- Logical Sectors Written +0x01 0x020 6 856473 --- Number of Write Commands +0x01 0x028 6 26403762 --- Logical Sectors Read +0x01 0x030 6 783973 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 35 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 43 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 300 --- Number of Hardware Resets +0x06 0x010 4 50 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/7741AF0EC89E b/SSD/Crucial/CT250/CT250MX500SSD1/7741AF0EC89E new file mode 100644 index 000000000..2b3da0c99 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/7741AF0EC89E @@ -0,0 +1,210 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 1 10:39:53 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1292 + 12 Power_Cycle_Count -O--CK 100 100 000 - 464 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 088 088 000 - 186 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 60 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 27 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 061 052 000 - 39 (Min/Max 0/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 088 088 001 - 12 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 17977568221 +247 Host_Program_Page_Count -O--CK 100 100 000 - 314936862 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 736056413 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1118 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 28/39 Celsius +Lifetime Min/Max Temperature: 0/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (5) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 464 --- Lifetime Power-On Resets +0x01 0x010 4 1292 --- Power-on Hours +0x01 0x018 6 797699037 --- Logical Sectors Written +0x01 0x020 6 464206136 --- Number of Write Commands +0x01 0x028 6 2698080486 --- Logical Sectors Read +0x01 0x030 6 591748742 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 60 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1344 --- Number of Hardware Resets +0x06 0x010 4 159 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/7E549D56E516 b/SSD/Crucial/CT250/CT250MX500SSD1/7E549D56E516 new file mode 100644 index 000000000..aa1d214b9 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/7E549D56E516 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.5-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 12:07:29 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13923 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 15 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 10 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 41 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 077 059 000 - 23 (Min/Max 14/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1972846039 +247 Host_Program_Page_Count -O--CK 100 100 000 - 44632716 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 19268884 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 18/27 Celsius +Lifetime Min/Max Temperature: 14/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (84) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 13923 --- Power-on Hours +0x01 0x018 6 1972846039 --- Logical Sectors Written +0x01 0x020 6 14615153 --- Number of Write Commands +0x01 0x028 6 2302332050 --- Logical Sectors Read +0x01 0x030 6 39739080 --- Number of Read Commands +0x01 0x038 6 2879268611 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x010 1 22 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 151 --- Number of Hardware Resets +0x06 0x010 4 41 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/822A68A7207E b/SSD/Crucial/CT250/CT250MX500SSD1/822A68A7207E new file mode 100644 index 000000000..a930dfb22 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/822A68A7207E @@ -0,0 +1,226 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 18 21:41:59 2025 ACDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14708 + 12 Power_Cycle_Count -O--CK 100 100 000 - 134 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 064 064 000 - 550 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 33 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 23 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 039 000 - 40 (Min/Max 0/61) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 064 064 001 - 36 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 79293584634 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1363818086 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1399419881 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 864 - +# 2 Short offline Completed without error 00% 846 - +# 3 Extended offline Completed without error 00% 840 - +# 4 Short offline Completed without error 00% 725 - +# 5 Short offline Completed without error 00% 705 - +# 6 Short offline Completed without error 00% 835 - +# 7 Short offline Completed without error 00% 834 - +# 8 Extended offline Completed without error 00% 829 - +# 9 Short offline Completed without error 00% 826 - +#10 Short offline Completed without error 00% 819 - +#11 Short offline Completed without error 00% 802 - +#12 Short offline Completed without error 00% 782 - +#13 Short offline Completed without error 00% 775 - +#14 Short offline Completed without error 00% 766 - +#15 Short offline Completed without error 00% 760 - +#16 Extended offline Completed without error 00% 759 - +#17 Short offline Completed without error 00% 753 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 38/47 Celsius +Lifetime Min/Max Temperature: 0/61 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 134 --- Lifetime Power-On Resets +0x01 0x010 4 14708 --- Power-on Hours +0x01 0x018 6 1984173306 --- Logical Sectors Written +0x01 0x020 6 1714040413 --- Number of Write Commands +0x01 0x028 6 98146542 --- Logical Sectors Read +0x01 0x030 6 113392555 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 33 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 41 --- Average Long Term Temperature +0x05 0x020 1 61 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 41 --- Lowest Average Short Term Temperature +0x05 0x040 1 55 --- Highest Average Long Term Temperature +0x05 0x048 1 41 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 45 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9635 --- Number of Hardware Resets +0x06 0x010 4 416 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 36 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/916584FB0760 b/SSD/Crucial/CT250/CT250MX500SSD1/916584FB0760 new file mode 100644 index 000000000..151374559 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/916584FB0760 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 22 19:17:46 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7999 + 12 Power_Cycle_Count -O--CK 100 100 000 - 167 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 8 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 34 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 33 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 055 055 000 - 45 (Min/Max 0/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 884430400 +247 Host_Program_Page_Count -O--CK 100 100 000 - 9991724 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4856725 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 32/45 Celsius +Lifetime Min/Max Temperature: 0/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 167 --- Lifetime Power-On Resets +0x01 0x010 4 7999 --- Power-on Hours +0x01 0x018 6 884430400 --- Logical Sectors Written +0x01 0x020 6 10143393 --- Number of Write Commands +0x01 0x028 6 1566388312 --- Logical Sectors Read +0x01 0x030 6 8454356 --- Number of Read Commands +0x01 0x038 6 3029046212 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 34 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 933 --- Number of Hardware Resets +0x06 0x010 4 228 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/958C7C27F319 b/SSD/Crucial/CT250/CT250MX500SSD1/958C7C27F319 new file mode 100644 index 000000000..bac661895 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/958C7C27F319 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.5-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 12:07:39 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13950 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 7 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 10 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 49 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 076 063 000 - 24 (Min/Max 0/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 6 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1023307848 +247 Host_Program_Page_Count -O--CK 100 100 000 - 11599920 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 10574749 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 20/25 Celsius +Lifetime Min/Max Temperature: 0/37 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (65535) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 13950 --- Power-on Hours +0x01 0x018 6 1023307848 --- Logical Sectors Written +0x01 0x020 6 12593261 --- Number of Write Commands +0x01 0x028 6 2701200217 --- Logical Sectors Read +0x01 0x030 6 38809963 --- Number of Read Commands +0x01 0x038 6 2978771405 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 30 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 280 --- Number of Hardware Resets +0x06 0x010 4 48 --- Number of ASR Events +0x06 0x018 4 6 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/95A99ECB7523 b/SSD/Crucial/CT250/CT250MX500SSD1/95A99ECB7523 new file mode 100644 index 000000000..4bdf0915c --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/95A99ECB7523 @@ -0,0 +1,210 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Feb 27 19:00:23 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9349 + 12 Power_Cycle_Count -O--CK 100 100 000 - 533 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 159 159 000 - 2955 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 20 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 30 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 057 044 000 - 43 (Min/Max 0/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 159 159 001 - 197 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 291507844090 +247 Host_Program_Page_Count -O--CK 100 100 000 - 19340992960 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 5619051993 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2988 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 30/51 Celsius +Lifetime Min/Max Temperature: 0/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (20) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 533 --- Lifetime Power-On Resets +0x01 0x010 4 9349 --- Power-on Hours +0x01 0x018 6 3745035258 --- Logical Sectors Written +0x01 0x020 6 1155567962 --- Number of Write Commands +0x01 0x028 6 3753318975 --- Logical Sectors Read +0x01 0x030 6 24944201 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 21 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 41 --- Average Short Term Temperature +0x05 0x018 1 41 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 52 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 46 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5219 --- Number of Hardware Resets +0x06 0x010 4 110 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 197 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/ACAB24A67126 b/SSD/Crucial/CT250/CT250MX500SSD1/ACAB24A67126 new file mode 100644 index 000000000..0a37ca96c --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/ACAB24A67126 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 23 19:25:59 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5788 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3096 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 44 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 235 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 074 032 000 - 26 (Min/Max 0/68) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5217051647 +247 Host_Program_Page_Count -O--CK 100 100 000 - 89336027 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 107395805 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 17/28 Celsius +Lifetime Min/Max Temperature: 0/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (27) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3096 --- Lifetime Power-On Resets +0x01 0x010 4 5788 --- Power-on Hours +0x01 0x018 6 922084351 --- Logical Sectors Written +0x01 0x020 6 72534840 --- Number of Write Commands +0x01 0x028 6 2360996718 --- Logical Sectors Read +0x01 0x030 6 106236755 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 236 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 68 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14679 --- Number of Hardware Resets +0x06 0x010 4 1088 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/C29618BC3F80 b/SSD/Crucial/CT250/CT250MX500SSD1/C29618BC3F80 new file mode 100644 index 000000000..31c86ea5a --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/C29618BC3F80 @@ -0,0 +1,189 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Nov 4 13:55:05 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17669 + 12 Power_Cycle_Count -O--CK 100 100 000 - 56 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 028 028 000 - 948 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 8 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 44 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 075 055 000 - 25 (Min/Max 0/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 028 028 001 - 72 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 62618499698 +247 Host_Program_Page_Count -O--CK 100 100 000 - 652665399 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3413663290 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17420 - +# 2 Short offline Completed without error 00% 3865 - +# 3 Short offline Completed without error 00% 878 - + +Read SMART Selective Self-test Log failed: Input/output error + +Read SCT Status failed: Input/output error + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 56 --- Lifetime Power-On Resets +0x01 0x010 4 17669 --- Power-on Hours +0x01 0x018 6 2488957554 --- Logical Sectors Written +0x01 0x020 6 856556370 --- Number of Write Commands +0x01 0x028 6 3636952243 --- Logical Sectors Read +0x01 0x030 6 468250884 --- Number of Read Commands +0x01 0x038 6 3479044484 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1234 --- Number of Hardware Resets +0x06 0x010 4 124 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 72 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/C3D56DB60930 b/SSD/Crucial/CT250/CT250MX500SSD1/C3D56DB60930 new file mode 100644 index 000000000..5c604cff6 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/C3D56DB60930 @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-PRERELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 7 14:38:17 2025 AWST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17504 + 12 Power_Cycle_Count -O--CK 100 100 000 - 270 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 069 069 000 - 469 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 18 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 25 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 031 000 - 36 (Min/Max 0/69) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 069 069 001 - 31 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 74589648750 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1257204506 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2231884764 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 28/47 Celsius +Lifetime Min/Max Temperature: 0/69 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 270 --- Lifetime Power-On Resets +0x01 0x010 4 17504 --- Power-on Hours +0x01 0x018 6 1575204718 --- Logical Sectors Written +0x01 0x020 6 174524932 --- Number of Write Commands +0x01 0x028 6 53507606 --- Logical Sectors Read +0x01 0x030 6 22265416 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 18 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 69 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 52 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 52 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 47 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 23359 --- Number of Hardware Resets +0x06 0x010 4 179 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 31 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/C9D7EFE2865F b/SSD/Crucial/CT250/CT250MX500SSD1/C9D7EFE2865F new file mode 100644 index 000000000..32ae171e6 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/C9D7EFE2865F @@ -0,0 +1,210 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 16:07:45 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2715 + 12 Power_Cycle_Count -O--CK 100 100 000 - 37 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 48 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 12 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 47 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 074 064 000 - 26 (Min/Max 22/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 2652643208 +247 Host_Program_Page_Count -O--CK 100 100 000 - 26482561 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 139336068 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/33 Celsius +Lifetime Min/Max Temperature: 22/36 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 2715 --- Power-on Hours +0x01 0x018 6 2652643208 --- Logical Sectors Written +0x01 0x020 6 42979362 --- Number of Write Commands +0x01 0x028 6 113205370 --- Logical Sectors Read +0x01 0x030 6 936073 --- Number of Read Commands +0x01 0x038 6 1185818054 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 12 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 139 --- Number of Hardware Resets +0x06 0x010 4 42 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 17 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/EA556C224E07 b/SSD/Crucial/CT250/CT250MX500SSD1/EA556C224E07 new file mode 100644 index 000000000..df4336b56 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/EA556C224E07 @@ -0,0 +1,210 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 25 23:09:00 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6854 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1570 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 082 082 000 - 274 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 158 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 057 040 000 - 43 (Min/Max 0/60) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 082 082 001 - 18 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 28962937004 +247 Host_Program_Page_Count -O--CK 100 100 000 - 526482545 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 904374294 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6549 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 43/45 Celsius +Lifetime Min/Max Temperature: 0/60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1570 --- Lifetime Power-On Resets +0x01 0x010 4 6854 --- Power-on Hours +0x01 0x018 6 3193133228 --- Logical Sectors Written +0x01 0x020 6 698398362 --- Number of Write Commands +0x01 0x028 6 3183786610 --- Logical Sectors Read +0x01 0x030 6 474787118 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 160 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 45 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4908 --- Number of Hardware Resets +0x06 0x010 4 78 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD4/76E282C9649B b/SSD/Crucial/CT250/CT250MX500SSD4/76E282C9649B new file mode 100644 index 000000000..7363bc234 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD4/76E282C9649B @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT250MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 5 21:42:21 2025 AWST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 22851 + 12 Power_Cycle_Count -O--CK 100 100 000 - 905 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 004 004 000 - 1445 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 116 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 32 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 2 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 029 000 - 41 (Min/Max 0/71) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 004 004 001 - 96 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 37877969199 +247 Host_Program_Page_Count -O--CK 100 100 000 - 735412978 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 11279908675 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 28/66 Celsius +Lifetime Min/Max Temperature: 0/71 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (65) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 905 --- Lifetime Power-On Resets +0x01 0x010 4 22851 --- Power-on Hours +0x01 0x018 6 3518230831 --- Logical Sectors Written +0x01 0x020 6 1428864438 --- Number of Write Commands +0x01 0x028 6 2964361406 --- Logical Sectors Read +0x01 0x030 6 570404098 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 141 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 43 --- Average Long Term Temperature +0x05 0x020 1 71 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 49 --- Highest Average Short Term Temperature +0x05 0x038 1 40 --- Lowest Average Short Term Temperature +0x05 0x040 1 48 --- Highest Average Long Term Temperature +0x05 0x048 1 40 --- Lowest Average Long Term Temperature +0x05 0x050 4 43 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5278 --- Number of Hardware Resets +0x06 0x010 4 41 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 96 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT256/CT256MX100SSD1/B1A944C91372 b/SSD/Crucial/CT256/CT256MX100SSD1/B1A944C91372 new file mode 100644 index 000000000..a762c26cb --- /dev/null +++ b/SSD/Crucial/CT256/CT256MX100SSD1/B1A944C91372 @@ -0,0 +1,220 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-PRERELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT256MX100SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 7 14:38:17 2025 AWST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1190) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 123 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 43464 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1121 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 17 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 380 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2159 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 045 000 - 32 (Min/Max 12/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 191 +202 Percent_Lifetime_Remain P---CK 100 100 000 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 6154763796 +247 Host_Program_Page_Count -O--CK 100 100 000 - 192363498 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 103822525 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 42784 - +# 2 Vendor (0xff) Completed without error 00% 38082 - +# 3 Vendor (0xff) Completed without error 00% 38055 - +# 4 Vendor (0xff) Completed without error 00% 19941 - +# 5 Vendor (0xff) Completed without error 00% 18797 - +# 6 Vendor (0xff) Completed without error 00% 14083 - +# 7 Vendor (0xff) Completed without error 00% 12694 - +# 8 Vendor (0xff) Completed without error 00% 12389 - +# 9 Vendor (0xff) Completed without error 00% 12373 - +#10 Vendor (0xff) Completed without error 00% 12103 - +#11 Vendor (0xff) Completed without error 00% 11792 - +#12 Vendor (0xff) Completed without error 00% 11779 - +#13 Vendor (0xff) Completed without error 00% 11758 - +#14 Vendor (0xff) Completed without error 00% 11746 - +#15 Vendor (0xff) Completed without error 00% 11701 - +#16 Vendor (0xff) Completed without error 00% 11606 - +#17 Vendor (0xff) Completed without error 00% 11575 - +#18 Vendor (0xff) Completed without error 00% 11546 - +#19 Vendor (0xff) Completed without error 00% 11522 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 23/37 Celsius +Lifetime Min/Max Temperature: 12/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (172) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1121 --- Lifetime Power-On Resets +0x01 0x010 4 43464 --- Power-on Hours +0x01 0x018 6 6154763804 --- Logical Sectors Written +0x01 0x020 6 85784129 --- Number of Write Commands +0x01 0x028 6 5048440451 --- Logical Sectors Read +0x01 0x030 6 112086395 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1595 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 54 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 46 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 178 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 191 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT275/CT275MX300SSD1/5FCF2FD545BF b/SSD/Crucial/CT275/CT275MX300SSD1/5FCF2FD545BF new file mode 100644 index 000000000..9a83e6861 --- /dev/null +++ b/SSD/Crucial/CT275/CT275MX300SSD1/5FCF2FD545BF @@ -0,0 +1,225 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT275MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR060 +User Capacity: 275,064,201,216 bytes [275 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Apr 4 21:21:51 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x04) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 497) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9417 + 12 Power_Cycle_Count -O--CK 100 100 000 - 440 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 40 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 436 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 056 000 - 36 (Min/Max 14/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5103554444 +247 Host_Program_Page_Count -O--CK 100 100 000 - 160501240 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 268148708 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1233 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 9291 - +# 2 Vendor (0xff) Completed without error 00% 592 - +# 3 Vendor (0xff) Completed without error 00% 436 - +# 4 Vendor (0xff) Completed without error 00% 8913 - +# 5 Vendor (0xff) Completed without error 00% 8688 - +# 6 Vendor (0xff) Completed without error 00% 8661 - +# 7 Vendor (0xff) Completed without error 00% 8505 - +# 8 Vendor (0xff) Completed without error 00% 8391 - +# 9 Vendor (0xff) Completed without error 00% 8070 - +#10 Vendor (0xff) Completed without error 00% 7807 - +#11 Vendor (0xff) Completed without error 00% 7550 - +#12 Vendor (0xff) Completed without error 00% 7346 - +#13 Vendor (0xff) Completed without error 00% 7202 - +#14 Vendor (0xff) Completed without error 00% 7107 - +#15 Vendor (0xff) Completed without error 00% 6862 - +#16 Vendor (0xff) Completed without error 00% 6647 - +#17 Vendor (0xff) Completed without error 00% 6438 - +#18 Vendor (0xff) Completed without error 00% 6257 - +#19 Vendor (0xff) Completed without error 00% 5936 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 20/38 Celsius +Lifetime Min/Max Temperature: 14/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (112) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 440 --- Lifetime Power-On Resets +0x01 0x010 4 9417 --- Power-on Hours +0x01 0x018 6 5103554444 --- Logical Sectors Written +0x01 0x020 6 82901781 --- Number of Write Commands +0x01 0x028 6 93465267068 --- Logical Sectors Read +0x01 0x030 6 197508460 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1125 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1795 --- Number of Hardware Resets +0x06 0x010 4 728 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 45 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT275/CT275MX300SSD1/7DE2B38160DD b/SSD/Crucial/CT275/CT275MX300SSD1/7DE2B38160DD new file mode 100644 index 000000000..21a2b75b5 --- /dev/null +++ b/SSD/Crucial/CT275/CT275MX300SSD1/7DE2B38160DD @@ -0,0 +1,207 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT275MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR060 +User Capacity: 275,064,201,216 bytes [275 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 4 14:01:08 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 728) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10311 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4120 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 087 087 000 - 196 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 541 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 073 055 000 - 27 (Min/Max 18/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 087 087 001 - 13 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 44171461628 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1381728475 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1326919274 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1247 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 5595 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 27/34 Celsius +Lifetime Min/Max Temperature: 18/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (325) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4120 --- Lifetime Power-On Resets +0x01 0x010 4 10311 --- Power-on Hours +0x01 0x018 6 44171461628 --- Logical Sectors Written +0x01 0x020 6 591279590 --- Number of Write Commands +0x01 0x028 6 39863201750 --- Logical Sectors Read +0x01 0x030 6 535342180 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4911 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13192 --- Number of Hardware Resets +0x06 0x010 4 2424 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT4000/CT4000BX500SSD1/C07DB6211CEE b/SSD/Crucial/CT4000/CT4000BX500SSD1/C07DB6211CEE new file mode 100644 index 000000000..68b9a73ea --- /dev/null +++ b/SSD/Crucial/CT4000/CT4000BX500SSD1/C07DB6211CEE @@ -0,0 +1,144 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CT4000BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR081 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 30 15:16:04 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2176 + 12 Power_Cycle_Count -O--CK 100 100 000 - 686 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 099 099 000 - 9 +174 Unknown_Attribute -O--CK 100 100 000 - 86 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 79 +183 Runtime_Bad_Block -O--CK 100 100 000 - 3 +184 End-to-End_Error -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 038 000 - 36 (Min/Max 17/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 9 +202 Unknown_SSD_Attribute ----CK 099 099 001 - 1 +206 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0 +210 Unknown_Attribute -O--CK 100 100 000 - 0 +246 Unknown_Attribute -O--CK 100 100 000 - 28130824217 +247 Unknown_Attribute -O--CK 100 100 000 - 879088256 +248 Unknown_Attribute -O--CK 100 100 000 - 1549378048 +249 Unknown_Attribute -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 152 +251 Unknown_Attribute -O--CK 100 100 000 - 1383066203 +252 Unknown_Attribute -O--CK 100 100 000 - 9 +253 Unknown_Attribute -O--CK 100 100 000 - 0 +254 Unknown_SSD_Attribute -O--CK 100 100 000 - 31816097472 +255 Unknown_Attribute -O--CK 100 100 000 - 101107008768 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1431 - +# 2 Short offline Completed without error 00% 1069 - +# 3 Extended offline Completed without error 00% 983 - +# 4 Short offline Completed without error 00% 207 - +# 5 Short offline Completed without error 00% 96 - +# 6 Extended offline Completed without error 00% 92 - +# 7 Short offline Completed without error 00% 73 - +# 8 Short offline Completed without error 00% 64 - +# 9 Short offline Completed without error 00% 61 - +#10 Short offline Completed without error 00% 58 - +#11 Short offline Completed without error 00% 58 - +#12 Short offline Completed without error 00% 41 - +#13 Short offline Completed without error 00% 16 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT4000/CT4000MX500SSD1/BB00E1DC64DD b/SSD/Crucial/CT4000/CT4000MX500SSD1/BB00E1DC64DD new file mode 100644 index 000000000..8b75729ed --- /dev/null +++ b/SSD/Crucial/CT4000/CT4000MX500SSD1/BB00E1DC64DD @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT4000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 16:25:56 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4294 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 257 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 076 059 000 - 24 (Min/Max 0/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5051658328 +247 Host_Program_Page_Count -O--CK 100 100 000 - 48284251 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 32860149 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 23/25 Celsius +Lifetime Min/Max Temperature: 0/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (82) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 4294 --- Power-on Hours +0x01 0x018 6 5051658328 --- Logical Sectors Written +0x01 0x020 6 191311318 --- Number of Write Commands +0x01 0x028 6 20278825486 --- Logical Sectors Read +0x01 0x030 6 90148677 --- Number of Read Commands +0x01 0x038 6 2575335449 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 28 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 155 --- Number of Hardware Resets +0x06 0x010 4 41 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT4000/CT4000MX500SSD1/EEAEB21F2302 b/SSD/Crucial/CT4000/CT4000MX500SSD1/EEAEB21F2302 new file mode 100644 index 000000000..6efe709e1 --- /dev/null +++ b/SSD/Crucial/CT4000/CT4000MX500SSD1/EEAEB21F2302 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT4000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 16:25:56 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4313 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 221 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 075 059 000 - 25 (Min/Max 23/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5051506144 +247 Host_Program_Page_Count -O--CK 100 100 000 - 48280391 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 32734997 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 23/26 Celsius +Lifetime Min/Max Temperature: 23/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (68) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 4313 --- Power-on Hours +0x01 0x018 6 5051506144 --- Logical Sectors Written +0x01 0x020 6 190403691 --- Number of Write Commands +0x01 0x028 6 20235420172 --- Logical Sectors Read +0x01 0x030 6 88571233 --- Number of Read Commands +0x01 0x038 6 2644156373 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 123 --- Number of Hardware Resets +0x06 0x010 4 42 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT4000/CT4000MX500SSD1/F2DBDA8873E4 b/SSD/Crucial/CT4000/CT4000MX500SSD1/F2DBDA8873E4 new file mode 100644 index 000000000..c21e68f43 --- /dev/null +++ b/SSD/Crucial/CT4000/CT4000MX500SSD1/F2DBDA8873E4 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT4000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 16:25:56 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4256 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 10 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 252 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 076 060 000 - 24 (Min/Max 22/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5051645008 +247 Host_Program_Page_Count -O--CK 100 100 000 - 48274001 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 35755208 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 23/25 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 4256 --- Power-on Hours +0x01 0x018 6 5051645008 --- Logical Sectors Written +0x01 0x020 6 189585277 --- Number of Write Commands +0x01 0x028 6 20255378128 --- Logical Sectors Read +0x01 0x030 6 89214772 --- Number of Read Commands +0x01 0x038 6 2438775889 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 123 --- Number of Hardware Resets +0x06 0x010 4 42 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT480/CT480BX200SSD1/A1F7A80407C9 b/SSD/Crucial/CT480/CT480BX200SSD1/A1F7A80407C9 new file mode 100644 index 000000000..51a426796 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX200SSD1/A1F7A80407C9 @@ -0,0 +1,195 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: CT480BX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU02.6 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 15 07:30:11 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 16144 + 12 Power_Cycle_Count ------ 100 100 000 - 1253 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 50 +163 Initial_Bad_Block_Count ------ 100 100 000 - 644 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 509996 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 7403 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 7250 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 7391 +164 Total_Erase_Count ------ 100 100 000 - 82680 +165 Max_Erase_Count ------ 100 100 000 - 96 +166 Min_Erase_Count ------ 100 100 000 - 13 +167 Average_Erase_Count ------ 100 100 000 - 64 +169 Remaining_Lifetime_Perc ------ 100 100 001 - 94 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 93 +194 Temperature_Celsius ------ 100 100 070 - 27 (35 34 34 34 0) +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 1713002 +242 Host_Reads_32MiB ------ 100 100 000 - 204867 +245 TLC_Writes_32MiB ------ 100 100 000 - 976657 +246 SLC_Writes_32MiB ------ 100 100 000 - 2039984 +247 Raid_Recoverty_Ct ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1253 --- Lifetime Power-On Resets +0x01 0x010 4 16144 --- Power-on Hours +0x01 0x018 6 594171135 --- Logical Sectors Written +0x01 0x020 6 1421514571 --- Number of Write Commands +0x01 0x028 6 541316191 --- Logical Sectors Read +0x01 0x030 6 212593451 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 94 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2002 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT480/CT480BX300SSD1/6AB606032076 b/SSD/Crucial/CT480/CT480BX300SSD1/6AB606032076 new file mode 100644 index 000000000..5769a44a8 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX300SSD1/6AB606032076 @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX300SSD1 +Serial Number: -- +Firmware Version: M2CR010 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 12 23:42:28 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15149 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5337 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 139 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 531 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 51 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 43 (Min/Max 0/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 66827751066 +247 Host_Program_Page_Count -O--CK 100 100 000 - 567827740 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 222232850 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 15129 - +# 2 Offline Completed without error 00% 15129 - +# 3 Offline Completed without error 00% 15129 - +# 4 Offline Completed without error 00% 15129 - +# 5 Offline Completed without error 00% 15126 - +# 6 Offline Completed without error 00% 15104 - +# 7 Offline Completed without error 00% 9 - +# 8 Offline Completed without error 00% 15108 - +# 9 Offline Completed without error 00% 15108 - +#10 Offline Completed without error 00% 15106 - +#11 Offline Completed without error 00% 15106 - +#12 Offline Completed without error 00% 15102 - +#13 Offline Completed without error 00% 15102 - +#14 Offline Completed without error 00% 15100 - +#15 Offline Completed without error 00% 15100 - +#16 Offline Completed without error 00% 15095 - +#17 Offline Completed without error 00% 15095 - +#18 Offline Completed without error 00% 15080 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 36/43 Celsius +Lifetime Min/Max Temperature: 0/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (10) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 5337 --- Lifetime Power-On Resets +0x01 0x010 4 15149 --- Power-on Hours +0x01 0x018 6 2403241626 --- Logical Sectors Written +0x01 0x020 6 954946634 --- Number of Write Commands +0x01 0x028 6 862711471 --- Logical Sectors Read +0x01 0x030 6 174080852 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 531 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 50229 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 24 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/406DC2BB248B b/SSD/Crucial/CT480/CT480BX500SSD1/406DC2BB248B new file mode 100644 index 000000000..c7db8ad03 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/406DC2BB248B @@ -0,0 +1,139 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 25 06:58:56 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2477 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 15 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 38 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 070 059 000 - 30 (Min/Max 25/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5918916248 +247 Host_Program_Page_Count -O--CK 100 100 000 - 184966132 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 374637312 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2808653776 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2376 - +# 2 Extended offline Completed without error 00% 2208 - +# 3 Extended offline Completed without error 00% 2041 - +# 4 Extended offline Completed without error 00% 1873 - +# 5 Extended offline Completed without error 00% 1705 - +# 6 Extended offline Completed without error 00% 1537 - +# 7 Extended offline Completed without error 00% 1369 - +# 8 Extended offline Completed without error 00% 1202 - +# 9 Short offline Completed without error 00% 1181 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/4A74B5745CC7 b/SSD/Crucial/CT480/CT480BX500SSD1/4A74B5745CC7 new file mode 100644 index 000000000..4061eeddb --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/4A74B5745CC7 @@ -0,0 +1,135 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Mar 17 21:42:36 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1381 + 12 Power_Cycle_Count -O--CK 100 100 000 - 28 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 43 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 055 000 - 42 (Min/Max 24/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 193242344 +247 Host_Program_Page_Count -O--CK 100 100 000 - 6038823 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 67584 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 76717164 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 67 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/5589F0D429E6 b/SSD/Crucial/CT480/CT480BX500SSD1/5589F0D429E6 new file mode 100644 index 000000000..3b6921d17 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/5589F0D429E6 @@ -0,0 +1,142 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 25 06:58:56 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2485 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 16 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 9 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 061 000 - 32 (Min/Max 26/39) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5918923523 +247 Host_Program_Page_Count -O--CK 100 100 000 - 184966360 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 369759744 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2724855283 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2384 - +# 2 Extended offline Completed without error 00% 2216 - +# 3 Extended offline Completed without error 00% 2047 - +# 4 Extended offline Completed without error 00% 1879 - +# 5 Extended offline Completed without error 00% 1712 - +# 6 Extended offline Completed without error 00% 1543 - +# 7 Extended offline Completed without error 00% 1375 - +# 8 Extended offline Completed without error 00% 1206 - +# 9 Extended offline Completed without error 00% 1186 - +#10 Short offline Completed without error 00% 1185 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/639DD300FE79 b/SSD/Crucial/CT480/CT480BX500SSD1/639DD300FE79 new file mode 100644 index 000000000..12977ffa7 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/639DD300FE79 @@ -0,0 +1,133 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR054 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 17 22:16:41 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10617 + 12 Power_Cycle_Count -O--CK 100 100 000 - 79 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 36 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 51 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 31 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 2 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 065 056 000 - 35 (Min/Max 22/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 21504002806 +247 Host_Program_Page_Count -O--CK 100 100 000 - 672000087 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 193560576 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 866883329 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 5 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 216 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/77C72201B426 b/SSD/Crucial/CT480/CT480BX500SSD1/77C72201B426 new file mode 100644 index 000000000..c33ea7c95 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/77C72201B426 @@ -0,0 +1,136 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 8 14:46:16 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 412 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1317 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 4 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 170 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 35 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 069 056 000 - 31 (Min/Max 20/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 899103048 +247 Host_Program_Page_Count -O--CK 100 100 000 - 28096970 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 36411328 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1131757505 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 153 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 35 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 46 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/78AD7199ED9B b/SSD/Crucial/CT480/CT480BX500SSD1/78AD7199ED9B new file mode 100644 index 000000000..e658a6ade --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/78AD7199ED9B @@ -0,0 +1,144 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 17:44:25 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3903 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 083 083 000 - 173 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 47 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 065 062 000 - 35 (Min/Max 25/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 083 083 001 - 17 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 107749895329 +247 Host_Program_Page_Count -O--CK 100 100 000 - 3367184229 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2234327040 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 3545532280 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 8 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 3865 - +# 2 Short offline Completed without error 00% 3555 - +# 3 Extended offline Completed without error 00% 3125 - +# 4 Short offline Completed without error 00% 2814 - +# 5 Extended offline Completed without error 00% 2408 - +# 6 Short offline Completed without error 00% 2098 - +# 7 Extended offline Completed without error 00% 1667 - +# 8 Short offline Completed without error 00% 1356 - +# 9 Extended offline Completed without error 00% 950 - +#10 Short offline Completed without error 00% 640 - +#11 Extended offline Completed without error 00% 210 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/8B6B528F15ED b/SSD/Crucial/CT480/CT480BX500SSD1/8B6B528F15ED new file mode 100644 index 000000000..93bc7e83f --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/8B6B528F15ED @@ -0,0 +1,140 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 27 17:14:22 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1255 + 12 Power_Cycle_Count -O--CK 100 100 000 - 621 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 057 057 000 - 430 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 56 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 071 049 000 - 29 (Min/Max 13/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 057 057 001 - 43 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 36351949951 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1135998435 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 535862688 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 415528502 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 36 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 6 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 8 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 487 - +# 2 Short offline Self-test routine in progress 90% 487 - +# 3 Short offline Completed without error 00% 327 - +# 4 Short offline Self-test routine in progress 90% 327 - +# 5 Short offline Completed without error 00% 185 - +# 6 Short offline Self-test routine in progress 90% 185 - +# 7 Short offline Completed without error 00% 128 - +# 8 Short offline Self-test routine in progress 90% 128 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/8C62BDC82C10 b/SSD/Crucial/CT480/CT480BX500SSD1/8C62BDC82C10 new file mode 100644 index 000000000..d14f6108c --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/8C62BDC82C10 @@ -0,0 +1,135 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR056 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 7 11:35:42 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1246 + 12 Power_Cycle_Count -O--CK 100 100 000 - 671 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 057 000 - 33 (Min/Max 19/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 578447574 +247 Host_Program_Page_Count -O--CK 100 100 000 - 18076486 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 12997856 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 549674514 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +254 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 29 +223 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/998A90C36E0F b/SSD/Crucial/CT480/CT480BX500SSD1/998A90C36E0F new file mode 100644 index 000000000..14edd8b59 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/998A90C36E0F @@ -0,0 +1,131 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 20:38:27 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 9 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 38 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 057 000 - 42 (Min/Max 28/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 14688443 +247 Host_Program_Page_Count -O--CK 100 100 000 - 459013 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 0 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 2180697 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 17 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/B2431DB9AAC8 b/SSD/Crucial/CT480/CT480BX500SSD1/B2431DB9AAC8 new file mode 100644 index 000000000..13c6360ca --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/B2431DB9AAC8 @@ -0,0 +1,131 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 21 10:18:20 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 33 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 075 074 000 - 25 (Min/Max 25/26) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 34026204 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1063318 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 0 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 4620264 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480BX500SSD1/E9EE269E9200 b/SSD/Crucial/CT480/CT480BX500SSD1/E9EE269E9200 new file mode 100644 index 000000000..cf3e7b603 --- /dev/null +++ b/SSD/Crucial/CT480/CT480BX500SSD1/E9EE269E9200 @@ -0,0 +1,132 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT480BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR072 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 14 13:30:50 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 997 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 5 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 22 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 051 047 000 - 49 (Min/Max 42/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 2488553843 +247 Host_Program_Page_Count -O--CK 100 100 000 - 77767307 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 52918272 +249 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 0 +251 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 1059965293 +252 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 +253 Unkn_CrucialMicron_Attr -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT500/CT500BX500SSD1/0325A00B4645 b/SSD/Crucial/CT500/CT500BX500SSD1/0325A00B4645 new file mode 100644 index 000000000..5fd6c3981 --- /dev/null +++ b/SSD/Crucial/CT500/CT500BX500SSD1/0325A00B4645 @@ -0,0 +1,131 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CT500BX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M6CR061 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 1 12:28:26 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6223 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2220 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 056 056 000 - 401 +174 Unknown_Attribute -O--CK 100 100 000 - 669 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 39 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 065 054 000 - 35 (Min/Max 18/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 3 +202 Unknown_SSD_Attribute ----CK 056 056 001 - 44 +206 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0 +210 Unknown_Attribute -O--CK 100 100 000 - 0 +246 Unknown_Attribute -O--CK 100 100 000 - 12658083946 +247 Unknown_Attribute -O--CK 100 100 000 - 395565123 +248 Unknown_Attribute -O--CK 100 100 000 - 11242832960 +249 Unknown_Attribute -O--CK 100 100 000 - 0 +251 Unknown_Attribute -O--CK 100 100 000 - 3517041482 +252 Unknown_Attribute -O--CK 100 100 000 - 46 +253 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5844 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT500/CT500MX200SSD1/138AF548AFDF b/SSD/Crucial/CT500/CT500MX200SSD1/138AF548AFDF new file mode 100644 index 000000000..eb1770970 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX200SSD1/138AF548AFDF @@ -0,0 +1,199 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT500MX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU03 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 8 19:24:59 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1325) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1357 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9394 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 92 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 25 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 5575 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 048 045 000 - 52 (Min/Max 19/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 78183196475 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2446198369 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 685689054 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 31/52 Celsius +Lifetime Min/Max Temperature: 19/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (164) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 9394 --- Lifetime Power-On Resets +0x01 0x010 4 1357 --- Power-on Hours +0x01 0x018 6 78183196475 --- Logical Sectors Written +0x01 0x020 6 407257221 --- Number of Write Commands +0x01 0x028 6 165980312000 --- Logical Sectors Read +0x01 0x030 6 1072439090 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 9375 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 52 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 28720 --- Number of Hardware Resets +0x06 0x010 4 76 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/040C4D4E20D7 b/SSD/Crucial/CT500/CT500MX500SSD1/040C4D4E20D7 new file mode 100644 index 000000000..58112b251 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/040C4D4E20D7 @@ -0,0 +1,227 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 10 16:23:31 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12001 + 12 Power_Cycle_Count -O--CK 100 100 000 - 434 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 230 230 000 - 1895 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 51 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 40 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 041 000 - 33 (Min/Max 0/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 230 230 001 - 126 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 74570537777 +247 Host_Program_Page_Count -O--CK 100 100 000 - 5953955086 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 29524288181 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9182 - +# 2 Short offline Completed without error 00% 9172 - +# 3 Short offline Completed without error 00% 9164 - +# 4 Short offline Completed without error 00% 9125 - +# 5 Short offline Completed without error 00% 9046 - +# 6 Short offline Completed without error 00% 7721 - +# 7 Short offline Completed without error 00% 6736 - +# 8 Short offline Completed without error 00% 6470 - +# 9 Short offline Completed without error 00% 6167 - +#10 Short offline Completed without error 00% 5690 - +#11 Short offline Completed without error 00% 4866 - +#12 Short offline Completed without error 00% 4336 - +#13 Short offline Completed without error 00% 4031 - +#14 Short offline Completed without error 00% 3803 - +#15 Short offline Completed without error 00% 2621 - +#16 Short offline Completed without error 00% 2229 - +#17 Short offline Completed without error 00% 1588 - +#18 Short offline Completed without error 00% 1385 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 19/36 Celsius +Lifetime Min/Max Temperature: 0/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (51) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 434 --- Lifetime Power-On Resets +0x01 0x010 4 12001 --- Power-on Hours +0x01 0x018 6 1556093745 --- Logical Sectors Written +0x01 0x020 6 1628084138 --- Number of Write Commands +0x01 0x028 6 3273001725 --- Logical Sectors Read +0x01 0x030 6 2574561935 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 60 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 48 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 45 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2683 --- Number of Hardware Resets +0x06 0x010 4 51 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 126 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/098A63EDDFEF b/SSD/Crucial/CT500/CT500MX500SSD1/098A63EDDFEF new file mode 100644 index 000000000..da10b5f2e --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/098A63EDDFEF @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 30 11:50:00 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5933 + 12 Power_Cycle_Count -O--CK 100 100 000 - 635 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 027 027 000 - 1097 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 83 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 42 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 052 032 000 - 48 (Min/Max 0/68) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 310 +202 Percent_Lifetime_Remain ----CK 027 027 001 - 73 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 132566974288 +247 Host_Program_Page_Count -O--CK 100 100 000 - 4221911327 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 13915676871 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 40/52 Celsius +Lifetime Min/Max Temperature: 0/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (20) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 635 --- Lifetime Power-On Resets +0x01 0x010 4 5933 --- Power-on Hours +0x01 0x018 6 3717955408 --- Logical Sectors Written +0x01 0x020 6 2761317516 --- Number of Write Commands +0x01 0x028 6 2544599357 --- Logical Sectors Read +0x01 0x030 6 2044631535 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 93 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 48 --- Current Temperature +0x05 0x010 1 46 --- Average Short Term Temperature +0x05 0x018 1 45 --- Average Long Term Temperature +0x05 0x020 1 68 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 46 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 45 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 47 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1104776933 --- Number of Hardware Resets +0x06 0x010 4 1908 --- Number of ASR Events +0x06 0x018 4 310 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 73 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/09C7646A0DD7 b/SSD/Crucial/CT500/CT500MX500SSD1/09C7646A0DD7 new file mode 100644 index 000000000..8820af96d --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/09C7646A0DD7 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 23:21:10 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 64 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 054 000 - 41 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5407782 +247 Host_Program_Page_Count -O--CK 100 100 000 - 49011 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 410 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 41/41 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (88) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 10 --- Power-on Hours +0x01 0x018 6 5407782 --- Logical Sectors Written +0x01 0x020 6 47956 --- Number of Write Commands +0x01 0x028 6 1317269 --- Logical Sectors Read +0x01 0x030 6 30031 --- Number of Read Commands +0x01 0x038 6 36145545 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 56 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/0F6D32621ED0 b/SSD/Crucial/CT500/CT500MX500SSD1/0F6D32621ED0 new file mode 100644 index 000000000..a6a2210c9 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/0F6D32621ED0 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 21:08:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17412 + 12 Power_Cycle_Count -O--CK 100 100 000 - 872 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 094 094 000 - 97 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 65 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 43 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 041 000 - 33 (Min/Max 0/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 094 094 001 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 16513749963 +247 Host_Program_Page_Count -O--CK 100 100 000 - 281879133 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1046606473 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14326 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 23/33 Celsius +Lifetime Min/Max Temperature: 0/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (90) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 872 --- Lifetime Power-On Resets +0x01 0x010 4 17412 --- Power-on Hours +0x01 0x018 6 3628848075 --- Logical Sectors Written +0x01 0x020 6 93799265 --- Number of Write Commands +0x01 0x028 6 1796443726 --- Logical Sectors Read +0x01 0x030 6 71565691 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 66 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 21 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 47 --- Highest Average Long Term Temperature +0x05 0x048 1 19 --- Lowest Average Long Term Temperature +0x05 0x050 4 47 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14754 --- Number of Hardware Resets +0x06 0x010 4 1072 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/109FF455D0A7 b/SSD/Crucial/CT500/CT500MX500SSD1/109FF455D0A7 new file mode 100644 index 000000000..4889b1c28 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/109FF455D0A7 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 6 06:07:41 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15897 + 12 Power_Cycle_Count -O--CK 100 100 000 - 517 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 30 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 36 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 51 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 048 000 - 42 (Min/Max 0/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 7908632820 +247 Host_Program_Page_Count -O--CK 100 100 000 - 75138539 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 54850440 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 40/44 Celsius +Lifetime Min/Max Temperature: 0/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (91) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 517 --- Lifetime Power-On Resets +0x01 0x010 4 15897 --- Power-on Hours +0x01 0x018 6 3613665524 --- Logical Sectors Written +0x01 0x020 6 82194730 --- Number of Write Commands +0x01 0x028 6 1011095248 --- Logical Sectors Read +0x01 0x030 6 6606065 --- Number of Read Commands +0x01 0x038 6 1397233076 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 36 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 12057 --- Number of Hardware Resets +0x06 0x010 4 1230 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/1A21648E8912 b/SSD/Crucial/CT500/CT500MX500SSD1/1A21648E8912 new file mode 100644 index 000000000..8aff3e16c --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/1A21648E8912 @@ -0,0 +1,229 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 26 19:50:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9065 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4512 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 094 094 000 - 90 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 556 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 48 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 069 046 000 - 31 (Min/Max 0/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 094 094 001 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 27723811103 +247 Host_Program_Page_Count -O--CK 100 100 000 - 461913129 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 328476440 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8393 - +# 2 Short offline Completed without error 00% 8392 - +# 3 Short offline Completed without error 00% 8378 - +# 4 Short offline Completed without error 00% 7965 - +# 5 Short offline Completed without error 00% 8368 - +# 6 Short offline Completed without error 00% 8363 - +# 7 Short offline Completed without error 00% 8360 - +# 8 Short offline Completed without error 00% 8354 - +# 9 Short offline Completed without error 00% 8342 - +#10 Short offline Completed without error 00% 8334 - +#11 Short offline Completed without error 00% 7862 - +#12 Short offline Completed without error 00% 8124 - +#13 Short offline Completed without error 00% 8116 - +#14 Short offline Completed without error 00% 8049 - +#15 Short offline Completed without error 00% 8034 - +#16 Extended offline Completed without error 00% 8016 - +#17 Short offline Completed without error 00% 7993 - +#18 Short offline Completed without error 00% 7986 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 23/31 Celsius +Lifetime Min/Max Temperature: 0/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (65) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4512 --- Lifetime Power-On Resets +0x01 0x010 4 9065 --- Power-on Hours +0x01 0x018 6 1954007327 --- Logical Sectors Written +0x01 0x020 6 253277145 --- Number of Write Commands +0x01 0x028 6 1288818020 --- Logical Sectors Read +0x01 0x030 6 425587230 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 556 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 28707 --- Number of Hardware Resets +0x06 0x010 4 6995 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/1CE7ECF7F404 b/SSD/Crucial/CT500/CT500MX500SSD1/1CE7ECF7F404 new file mode 100644 index 000000000..849b2482c --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/1CE7ECF7F404 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 29 00:38:46 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 64 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 072 071 000 - 28 (Min/Max 0/29) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 59275145 +247 Host_Program_Page_Count -O--CK 100 100 000 - 590299 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 10554 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 24/29 Celsius +Lifetime Min/Max Temperature: 0/29 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 12 --- Power-on Hours +0x01 0x018 6 59275145 --- Logical Sectors Written +0x01 0x020 6 310326 --- Number of Write Commands +0x01 0x028 6 36193115 --- Logical Sectors Read +0x01 0x030 6 461516 --- Number of Read Commands +0x01 0x038 6 45022970 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 26 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 99 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/20C1CF69F623 b/SSD/Crucial/CT500/CT500MX500SSD1/20C1CF69F623 new file mode 100644 index 000000000..115be0e5c --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/20C1CF69F623 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 24 19:23:28 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 177 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 37 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 045 000 - 38 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1010091180 +247 Host_Program_Page_Count -O--CK 100 100 000 - 16304156 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1602502 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 30/41 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (59) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 177 --- Power-on Hours +0x01 0x018 6 1010091180 --- Logical Sectors Written +0x01 0x020 6 1541095 --- Number of Write Commands +0x01 0x028 6 7767583 --- Logical Sectors Read +0x01 0x030 6 57860 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 36 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 31 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/3AC4E59435C2 b/SSD/Crucial/CT500/CT500MX500SSD1/3AC4E59435C2 new file mode 100644 index 000000000..6eeaca6f6 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/3AC4E59435C2 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-BETA5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Nov 11 20:33:28 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 337 + 12 Power_Cycle_Count -O--CK 100 100 000 - 180 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 6 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 40 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 64 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 056 000 - 34 (Min/Max 0/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1719483106 +247 Host_Program_Page_Count -O--CK 100 100 000 - 16358314 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 12304980 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 0/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (81) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 180 --- Lifetime Power-On Resets +0x01 0x010 4 337 --- Power-on Hours +0x01 0x018 6 1719483106 --- Logical Sectors Written +0x01 0x020 6 41508550 --- Number of Write Commands +0x01 0x028 6 2847428126 --- Logical Sectors Read +0x01 0x030 6 54714438 --- Number of Read Commands +0x01 0x038 6 1214233134 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 40 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1358 --- Number of Hardware Resets +0x06 0x010 4 336 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/432018A90583 b/SSD/Crucial/CT500/CT500MX500SSD1/432018A90583 new file mode 100644 index 000000000..cd91b00fd --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/432018A90583 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 28 12:47:39 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17834 + 12 Power_Cycle_Count -O--CK 100 100 000 - 105 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 026 026 000 - 1112 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 72 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 34 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 061 022 000 - 39 (Min/Max 0/78) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 026 026 001 - 74 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 71656520154 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1880862201 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 15049075168 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 28/45 Celsius +Lifetime Min/Max Temperature: 0/78 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (10) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 105 --- Lifetime Power-On Resets +0x01 0x010 4 17834 --- Power-on Hours +0x01 0x018 6 2937043418 --- Logical Sectors Written +0x01 0x020 6 3040026269 --- Number of Write Commands +0x01 0x028 6 3789844935 --- Logical Sectors Read +0x01 0x030 6 309494773 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 219 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 78 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 55 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 48 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 836 --- Number of Hardware Resets +0x06 0x010 4 123 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 74 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/456CDC70FCAF b/SSD/Crucial/CT500/CT500MX500SSD1/456CDC70FCAF new file mode 100644 index 000000000..0c7e2a3ae --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/456CDC70FCAF @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR033 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 30 15:09:33 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7586 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1559 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 5 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 21 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 070 052 000 - 30 (Min/Max 0/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1473215076 +247 Host_Program_Page_Count -O--CK 100 100 000 - 13609665 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 11161646 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 27/38 Celsius +Lifetime Min/Max Temperature: 0/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (14) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1559 --- Lifetime Power-On Resets +0x01 0x010 4 7586 --- Power-on Hours +0x01 0x018 6 1473215076 --- Logical Sectors Written +0x01 0x020 6 28539951 --- Number of Write Commands +0x01 0x028 6 345762143 --- Logical Sectors Read +0x01 0x030 6 5891562 --- Number of Read Commands +0x01 0x038 6 1540551299 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9969 --- Number of Hardware Resets +0x06 0x010 4 317 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/61281BB91C55 b/SSD/Crucial/CT500/CT500MX500SSD1/61281BB91C55 new file mode 100644 index 000000000..5e61770ed --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/61281BB91C55 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 15 14:20:44 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12546 + 12 Power_Cycle_Count -O--CK 100 100 000 - 12 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 044 044 000 - 569 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 59 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 074 054 000 - 26 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 044 044 001 - 56 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 80097835259 +247 Host_Program_Page_Count -O--CK 100 100 000 - 893160035 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3826743297 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 16/39 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 12546 --- Power-on Hours +0x01 0x018 6 80097835259 --- Logical Sectors Written +0x01 0x020 6 874692409 --- Number of Write Commands +0x01 0x028 6 3463778363 --- Logical Sectors Read +0x01 0x030 6 47948655 --- Number of Read Commands +0x01 0x038 6 2219040745 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 184 --- Number of Hardware Resets +0x06 0x010 4 37 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 56 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/66102E026A84 b/SSD/Crucial/CT500/CT500MX500SSD1/66102E026A84 new file mode 100644 index 000000000..ff7648652 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/66102E026A84 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Mar 28 15:45:32 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3472 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1112 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 46 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 47 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 42 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 051 000 - 36 (Min/Max 19/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5059765994 +247 Host_Program_Page_Count -O--CK 100 100 000 - 109508344 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 80280103 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 23/38 Celsius +Lifetime Min/Max Temperature: 19/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (46) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1112 --- Lifetime Power-On Resets +0x01 0x010 4 3472 --- Power-on Hours +0x01 0x018 6 5059765994 --- Logical Sectors Written +0x01 0x020 6 190421398 --- Number of Write Commands +0x01 0x028 6 1646254066 --- Logical Sectors Read +0x01 0x030 6 21555099 --- Number of Read Commands +0x01 0x038 6 3910582762 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 47 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6701 --- Number of Hardware Resets +0x06 0x010 4 854 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/6C8628DB95FF b/SSD/Crucial/CT500/CT500MX500SSD1/6C8628DB95FF new file mode 100644 index 000000000..520c4c259 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/6C8628DB95FF @@ -0,0 +1,208 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 17 10:44:01 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (54799) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x3803) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 63760 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21746 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 043 043 000 - 574 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 13 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 57 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 043 000 - 33 (Min/Max 0/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 043 043 001 - 57 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 49202099577 +247 Host_Program_Page_Count -O--CK 100 100 000 - 568331122 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3607607138 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Invalid Self-test Log index = 0x2f92 (reserved = 0x00) +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 24/46 Celsius +Lifetime Min/Max Temperature: 0/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (45) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 21746 --- Power-on Hours +0x01 0x018 6 1957459321 --- Logical Sectors Written +0x01 0x020 6 1019781640 --- Number of Write Commands +0x01 0x028 6 198101733 --- Logical Sectors Read +0x01 0x030 6 6927490 --- Number of Read Commands +0x01 0x038 6 977762865 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 13 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 46 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 38 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 49 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 307 --- Number of Hardware Resets +0x06 0x010 4 84 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 57 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 41 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/8290B819C486 b/SSD/Crucial/CT500/CT500MX500SSD1/8290B819C486 new file mode 100644 index 000000000..8f453cfd3 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/8290B819C486 @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 9 13:12:07 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 730 + 12 Power_Cycle_Count -O--CK 100 100 000 - 532 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 44 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 7 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 54 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 074 045 000 - 26 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 8158728440 +247 Host_Program_Page_Count -O--CK 100 100 000 - 70148760 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 214810003 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/26 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 532 --- Lifetime Power-On Resets +0x01 0x010 4 730 --- Power-on Hours +0x01 0x018 6 8158728440 --- Logical Sectors Written +0x01 0x020 6 73663264 --- Number of Write Commands +0x01 0x028 6 17221675702 --- Logical Sectors Read +0x01 0x030 6 108450947 --- Number of Read Commands +0x01 0x038 6 2628894936 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1888 --- Number of Hardware Resets +0x06 0x010 4 105 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/8B62F7752B0F b/SSD/Crucial/CT500/CT500MX500SSD1/8B62F7752B0F new file mode 100644 index 000000000..9a17a32bc --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/8B62F7752B0F @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR045 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 9 19:08:03 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 89 + 12 Power_Cycle_Count -O--CK 100 100 000 - 134 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 2 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 29 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 64 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 065 062 000 - 35 (Min/Max 0/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 794877641 +247 Host_Program_Page_Count -O--CK 100 100 000 - 7540184 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2721203 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 32/36 Celsius +Lifetime Min/Max Temperature: 0/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (67) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 134 --- Lifetime Power-On Resets +0x01 0x010 4 89 --- Power-on Hours +0x01 0x018 6 794877641 --- Logical Sectors Written +0x01 0x020 6 14627981 --- Number of Write Commands +0x01 0x028 6 188481615 --- Logical Sectors Read +0x01 0x030 6 2888979 --- Number of Read Commands +0x01 0x038 6 323723854 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 29 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1147 --- Number of Hardware Resets +0x06 0x010 4 93 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/8CD49C385504 b/SSD/Crucial/CT500/CT500MX500SSD1/8CD49C385504 new file mode 100644 index 000000000..c81c36c83 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/8CD49C385504 @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 14:30:31 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5930 + 12 Power_Cycle_Count -O--CK 100 100 000 - 50 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 094 094 000 - 60 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 30 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 077 058 000 - 23 (Min/Max 0/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 094 094 001 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 11541908510 +247 Host_Program_Page_Count -O--CK 100 100 000 - 108326892 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 347080452 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4910 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 22/38 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (96) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 5930 --- Power-on Hours +0x01 0x018 6 11541908510 --- Logical Sectors Written +0x01 0x020 6 200684854 --- Number of Write Commands +0x01 0x028 6 1103187746 --- Logical Sectors Read +0x01 0x030 6 22859606 --- Number of Read Commands +0x01 0x038 6 4171636570 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 314 --- Number of Hardware Resets +0x06 0x010 4 40 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/BA88DA036DD8 b/SSD/Crucial/CT500/CT500MX500SSD1/BA88DA036DD8 new file mode 100644 index 000000000..477d086d7 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/BA88DA036DD8 @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 19 22:07:45 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3354 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2784 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 023 023 000 - 1169 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 422 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 48 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 045 025 000 - 55 (Min/Max 0/75) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 023 023 001 - 77 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 147686290164 +247 Host_Program_Page_Count -O--CK 100 100 000 - 9641074217 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 12147621735 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1812 - +# 2 Short offline Completed without error 00% 1442 - +# 3 Short offline Completed without error 00% 718 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 55 Celsius +Power Cycle Min/Max Temperature: 31/73 Celsius +Lifetime Min/Max Temperature: 0/75 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2784 --- Lifetime Power-On Resets +0x01 0x010 4 3354 --- Power-on Hours +0x01 0x018 6 1657402100 --- Logical Sectors Written +0x01 0x020 6 1490888687 --- Number of Write Commands +0x01 0x028 6 1893653278 --- Logical Sectors Read +0x01 0x030 6 545305100 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 422 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 55 --- Current Temperature +0x05 0x010 1 52 --- Average Short Term Temperature +0x05 0x018 1 52 --- Average Long Term Temperature +0x05 0x020 1 75 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 61 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 61 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 140 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 12427 --- Number of Hardware Resets +0x06 0x010 4 249 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 77 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 78 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/D313347833FF b/SSD/Crucial/CT500/CT500MX500SSD1/D313347833FF new file mode 100644 index 000000000..d50111ca3 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/D313347833FF @@ -0,0 +1,216 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 21:08:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6516 + 12 Power_Cycle_Count -O--CK 100 100 000 - 170 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 26 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 34 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 59 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 073 050 000 - 27 (Min/Max 0/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 6 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5378010996 +247 Host_Program_Page_Count -O--CK 100 100 000 - 64621543 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 54216202 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1985 - +# 2 Short offline Completed without error 00% 1984 - +# 3 Short offline Completed without error 00% 1377 - +# 4 Short offline Completed without error 00% 1324 - +# 5 Short offline Completed without error 00% 53 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 23/27 Celsius +Lifetime Min/Max Temperature: 0/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (4) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 170 --- Lifetime Power-On Resets +0x01 0x010 4 6516 --- Power-on Hours +0x01 0x018 6 1083043700 --- Logical Sectors Written +0x01 0x020 6 75502852 --- Number of Write Commands +0x01 0x028 6 1781350117 --- Logical Sectors Read +0x01 0x030 6 19037826 --- Number of Read Commands +0x01 0x038 6 1983797121 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 38 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2300 --- Number of Hardware Resets +0x06 0x010 4 732 --- Number of ASR Events +0x06 0x018 4 6 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/EBE6E344D7F8 b/SSD/Crucial/CT500/CT500MX500SSD1/EBE6E344D7F8 new file mode 100644 index 000000000..4846c47f0 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/EBE6E344D7F8 @@ -0,0 +1,214 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR046 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 21:08:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2986 + 12 Power_Cycle_Count -O--CK 100 100 000 - 115 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 10 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 32 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 45 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 074 054 000 - 26 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 2011696106 +247 Host_Program_Page_Count -O--CK 100 100 000 - 24351884 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 15599998 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1924 - +# 2 Short offline Completed without error 00% 1249 - +# 3 Short offline Completed without error 00% 1248 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 23/26 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (96) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 115 --- Lifetime Power-On Resets +0x01 0x010 4 2986 --- Power-on Hours +0x01 0x018 6 2011696106 --- Logical Sectors Written +0x01 0x020 6 31375277 --- Number of Write Commands +0x01 0x028 6 1236335329 --- Logical Sectors Read +0x01 0x030 6 20036482 --- Number of Read Commands +0x01 0x038 6 2160959688 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 32 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 22 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 857 --- Number of Hardware Resets +0x06 0x010 4 250 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/F0E4B0EC096D b/SSD/Crucial/CT500/CT500MX500SSD1/F0E4B0EC096D new file mode 100644 index 000000000..968b549ed --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/F0E4B0EC096D @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 21 21:14:53 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 26331 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 096 096 000 - 54 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 55 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 043 033 000 - 57 (Min/Max 0/67) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 096 096 001 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 15453750758 +247 Host_Program_Page_Count -O--CK 100 100 000 - 138021840 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 95519626 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 58 Celsius +Power Cycle Min/Max Temperature: 57/58 Celsius +Lifetime Min/Max Temperature: 0/67 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (112) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x010 4 26331 --- Power-on Hours +0x01 0x018 6 2568848870 --- Logical Sectors Written +0x01 0x020 6 211972148 --- Number of Write Commands +0x01 0x028 6 119939626 --- Logical Sectors Read +0x01 0x030 6 4066855 --- Number of Read Commands +0x01 0x038 6 303941116 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 58 --- Current Temperature +0x05 0x010 1 56 --- Average Short Term Temperature +0x05 0x018 1 56 --- Average Long Term Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 65 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 65 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 210 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/F9C66E622476 b/SSD/Crucial/CT500/CT500MX500SSD1/F9C66E622476 new file mode 100644 index 000000000..910c01878 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/F9C66E622476 @@ -0,0 +1,222 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR043 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 19 09:04:50 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15268 + 12 Power_Cycle_Count -O--CK 100 100 000 - 524 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 013 013 000 - 1133 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 77 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 44 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 071 053 000 - 29 (Min/Max 0/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 013 013 001 - 87 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 311562107279 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2733903619 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1718203778 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15195 - +# 2 Short offline Completed without error 00% 15190 - +# 3 Short offline Completed without error 00% 14891 - +# 4 Short offline Completed without error 00% 14789 - +# 5 Short offline Completed without error 00% 14709 - +# 6 Extended offline Completed without error 00% 14706 - +# 7 Short offline Completed without error 00% 14361 - +# 8 Extended offline Completed without error 00% 14325 - +# 9 Short offline Completed without error 00% 14088 - +#10 Short offline Completed without error 00% 13728 - +#11 Short offline Completed without error 00% 13725 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 23/29 Celsius +Lifetime Min/Max Temperature: 0/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 524 --- Lifetime Power-On Resets +0x01 0x010 4 15268 --- Power-on Hours +0x01 0x018 6 2324461967 --- Logical Sectors Written +0x01 0x020 6 1916246213 --- Number of Write Commands +0x01 0x028 6 1947966713 --- Logical Sectors Read +0x01 0x030 6 324488108 --- Number of Read Commands +0x01 0x038 6 3425554667 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 77 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8546 --- Number of Hardware Resets +0x06 0x010 4 2594 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 87 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD4/162BA3E2C016 b/SSD/Crucial/CT500/CT500MX500SSD4/162BA3E2C016 new file mode 100644 index 000000000..0015b8df1 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD4/162BA3E2C016 @@ -0,0 +1,101 @@ +smartctl 7.3 2022-02-28 r5338 [NetBSD 10.1 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 20 21:35:34 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14437 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3400 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 073 073 000 Old_age Always - 413 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 166 +180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 39 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 060 014 000 Old_age Always - 40 (Min/Max 0/86) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 073 073 001 Old_age Offline - 27 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 90519731754 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 1873656806 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 4565081572 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Crucial/CT500/CT500MX500SSD4/6DE851F47A92 b/SSD/Crucial/CT500/CT500MX500SSD4/6DE851F47A92 new file mode 100644 index 000000000..ba1b57685 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD4/6DE851F47A92 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 30 19:21:50 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 26415 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15311 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 041 041 000 - 896 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 8779 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 37 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 6 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 057 007 000 - 43 (Min/Max 0/93) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 041 041 001 - 59 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 242625547047 +247 Host_Program_Page_Count -O--CK 100 100 000 - 4083542023 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4588584016 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 43/48 Celsius +Lifetime Min/Max Temperature: 0/93 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15311 --- Lifetime Power-On Resets +0x01 0x010 4 26415 --- Power-on Hours +0x01 0x018 6 2107378471 --- Logical Sectors Written +0x01 0x020 6 2797570528 --- Number of Write Commands +0x01 0x028 6 2026712318 --- Logical Sectors Read +0x01 0x030 6 2672278385 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8790 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 45 --- Average Short Term Temperature +0x05 0x018 1 45 --- Average Long Term Temperature +0x05 0x020 1 93 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 66 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 52 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 169 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 51770 --- Number of Hardware Resets +0x06 0x010 4 5111 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 59 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD4/D0E0178C0320 b/SSD/Crucial/CT500/CT500MX500SSD4/D0E0178C0320 new file mode 100644 index 000000000..86b618860 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD4/D0E0178C0320 @@ -0,0 +1,211 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT500MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 15 12:43:47 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13431 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6314 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 070 070 000 - 459 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1349 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 40 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 056 247 000 - 44 (Min/Max 0/109) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1570 +202 Percent_Lifetime_Remain ----CK 070 070 001 - 30 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 78736172118 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1284166093 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4269756159 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 34/52 Celsius +Lifetime Min/Max Temperature: 0/109 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (34) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6314 --- Lifetime Power-On Resets +0x01 0x010 4 13431 --- Power-on Hours +0x01 0x018 6 1426760790 --- Logical Sectors Written +0x01 0x020 6 352791698 --- Number of Write Commands +0x01 0x028 6 2071445090 --- Logical Sectors Read +0x01 0x030 6 368818222 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3253 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 109 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 79 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 57 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 220 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 37 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 225153 --- Number of Hardware Resets +0x06 0x010 4 1168 --- Number of ASR Events +0x06 0x018 4 1570 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 30 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT512/CT512MX100SSD1/3E5D1676AA42 b/SSD/Crucial/CT512/CT512MX100SSD1/3E5D1676AA42 new file mode 100644 index 000000000..33b2a0359 --- /dev/null +++ b/SSD/Crucial/CT512/CT512MX100SSD1/3E5D1676AA42 @@ -0,0 +1,206 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT512MX100SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU03 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 12 20:18:31 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2380) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 4 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21260 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3503 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 094 094 000 - 208 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 231 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 4403 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 071 044 000 - 29 (Min/Max 7/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain P---CK 094 094 000 - 6 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 76037803945 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2399216646 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 4377045756 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12418 - +# 2 Short offline Completed without error 00% 10734 - +# 3 Short offline Completed without error 00% 10188 - +# 4 Short offline Completed without error 00% 10152 - +# 5 Short offline Completed without error 00% 10126 - +# 6 Vendor (0xff) Completed without error 00% 6101 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 25/29 Celsius +Lifetime Min/Max Temperature: 7/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (408) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3503 --- Lifetime Power-On Resets +0x01 0x010 4 21260 --- Power-on Hours +0x01 0x018 6 76037803945 --- Logical Sectors Written +0x01 0x020 6 1764087093 --- Number of Write Commands +0x01 0x028 6 96598594879 --- Logical Sectors Read +0x01 0x030 6 1486629489 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4455 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 8 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1291 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/7D4D860D37B7 b/SSD/Crucial/CT525/CT525MX300SSD1/7D4D860D37B7 new file mode 100644 index 000000000..20a9123ef --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/7D4D860D37B7 @@ -0,0 +1,226 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR060 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 6 00:10:15 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1391) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 2 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 14965 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3275 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 095 095 000 - 81 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 180 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 033 000 - 42 (Min/Max 15/67) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 095 095 001 - 5 +206 Write_Error_Rate -OSR-- 100 100 000 - 1 +246 Total_LBAs_Written -O--CK 100 100 000 - 40972020654 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1282086536 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 901908007 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1949 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 14872 - +# 2 Vendor (0xff) Completed without error 00% 14729 - +# 3 Vendor (0xff) Completed without error 00% 14618 - +# 4 Vendor (0xff) Completed without error 00% 14449 - +# 5 Vendor (0xff) Completed without error 00% 14326 - +# 6 Vendor (0xff) Completed without error 00% 14180 - +# 7 Vendor (0xff) Completed without error 00% 14130 - +# 8 Vendor (0xff) Completed without error 00% 14020 - +# 9 Vendor (0xff) Completed without error 00% 13852 - +#10 Vendor (0xff) Completed without error 00% 13707 - +#11 Vendor (0xff) Completed without error 00% 13539 - +#12 Vendor (0xff) Completed without error 00% 13372 - +#13 Vendor (0xff) Completed without error 00% 13206 - +#14 Vendor (0xff) Completed without error 00% 13040 - +#15 Vendor (0xff) Completed without error 00% 12874 - +#16 Vendor (0xff) Completed without error 00% 12704 - +#17 Vendor (0xff) Completed without error 00% 12535 - +#18 Vendor (0xff) Completed without error 00% 12370 - +#19 Vendor (0xff) Completed without error 00% 12199 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 32/45 Celsius +Lifetime Min/Max Temperature: 15/67 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (61) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3275 --- Lifetime Power-On Resets +0x01 0x010 4 14965 --- Power-on Hours +0x01 0x018 6 40972020654 --- Logical Sectors Written +0x01 0x020 6 238016493 --- Number of Write Commands +0x01 0x028 6 28043419693 --- Logical Sectors Read +0x01 0x030 6 226560607 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3338 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 46 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 55 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 21673 --- Number of Hardware Resets +0x06 0x010 4 123 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/9FDEEAACADF5 b/SSD/Crucial/CT525/CT525MX300SSD1/9FDEEAACADF5 new file mode 100644 index 000000000..250b5149d --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/9FDEEAACADF5 @@ -0,0 +1,273 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-ALPHA5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR060 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 11 12:36:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1391) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 1 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 13357 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2785 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 090 090 000 - 163 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 381 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 2 +194 Temperature_Celsius -O---K 071 054 000 - 29 (Min/Max 11/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 2 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 090 090 001 - 10 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 58980457276 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1844764204 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1493833305 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1898 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 2381 hours (99 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 06 0f 9a f0 40 08 Error: UNC at LBA = 0x060f9af0 = 101686000 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 06 0f 9a f0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 00 08 00 00 06 0f 9a e8 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 00 08 00 00 06 0f 9a e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 0f 9b e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 47 00 00 00 01 00 00 00 00 06 30 e0 08 49d+12:39:12.704 READ LOG DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 2381 hours (99 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 06 0f 9a e0 40 08 Error: UNC at LBA = 0x060f9ae0 = 101685984 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 06 0f 9a e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 0f 99 e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 0f 98 e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 0f 97 e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 0f 96 e0 40 08 49d+12:39:12.704 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 13094 - +# 2 Vendor (0xff) Completed without error 00% 12979 - +# 3 Vendor (0xff) Completed without error 00% 12762 - +# 4 Vendor (0xff) Completed without error 00% 12725 - +# 5 Vendor (0xff) Completed without error 00% 12055 - +# 6 Vendor (0xff) Completed without error 00% 10869 - +# 7 Vendor (0xff) Completed without error 00% 10804 - +# 8 Vendor (0xff) Completed without error 00% 9887 - +# 9 Vendor (0xff) Completed without error 00% 9357 - +#10 Vendor (0xff) Completed without error 00% 9239 - +#11 Vendor (0xff) Completed without error 00% 7179 - +#12 Vendor (0xff) Completed without error 00% 6828 - +#13 Vendor (0xff) Completed without error 00% 6758 - +#14 Vendor (0xff) Completed without error 00% 6233 - +#15 Vendor (0xff) Completed without error 00% 5402 - +#16 Vendor (0xff) Completed without error 00% 5163 - +#17 Vendor (0xff) Completed without error 00% 4152 - +#18 Vendor (0xff) Completed without error 00% 4080 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 22/30 Celsius +Lifetime Min/Max Temperature: 11/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (378) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2785 --- Lifetime Power-On Resets +0x01 0x010 4 13357 --- Power-on Hours +0x01 0x018 6 58980457276 --- Logical Sectors Written +0x01 0x020 6 700038138 --- Number of Write Commands +0x01 0x028 6 147031651878 --- Logical Sectors Read +0x01 0x030 6 765949563 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2985 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14866 --- Number of Hardware Resets +0x06 0x010 4 4233 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/D832C722DD7C b/SSD/Crucial/CT525/CT525MX300SSD1/D832C722DD7C new file mode 100644 index 000000000..122fa6bf7 --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/D832C722DD7C @@ -0,0 +1,223 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR031 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 1 15:34:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1391) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 272 + 5 Reallocate_NAND_Blk_Cnt -O--CK 094 094 010 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 19462 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1307 +171 Program_Fail_Count -O--CK 100 100 000 - 26 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 30 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 187 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 071 049 000 - 29 (Min/Max 5/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 100 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 104 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 26 +246 Total_LBAs_Written -O--CK 100 100 000 - 7456638330 +247 Host_Program_Page_Count -O--CK 100 100 000 - 233284646 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 615214805 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1820 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 918 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 19424 - +# 2 Vendor (0xff) Completed without error 00% 18563 - +# 3 Vendor (0xff) Completed without error 00% 17836 - +# 4 Vendor (0xff) Completed without error 00% 17004 - +# 5 Vendor (0xff) Completed without error 00% 16511 - +# 6 Vendor (0xff) Completed without error 00% 15542 - +# 7 Vendor (0xff) Completed without error 00% 15471 - +# 8 Vendor (0xff) Completed without error 00% 15120 - +# 9 Vendor (0xff) Completed without error 00% 14958 - +#10 Vendor (0xff) Completed without error 00% 14763 - +#11 Vendor (0xff) Completed without error 00% 14175 - +#12 Vendor (0xff) Completed without error 00% 13978 - +#13 Vendor (0xff) Completed without error 00% 13279 - +#14 Vendor (0xff) Completed without error 00% 12890 - +#15 Vendor (0xff) Completed without error 00% 12667 - +#16 Vendor (0xff) Completed without error 00% 12047 - +#17 Vendor (0xff) Completed without error 00% 11126 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 23/29 Celsius +Lifetime Min/Max Temperature: 5/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (102) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1307 --- Lifetime Power-On Resets +0x01 0x010 4 19462 --- Power-on Hours +0x01 0x018 6 7456638330 --- Logical Sectors Written +0x01 0x020 6 47303785 --- Number of Write Commands +0x01 0x028 6 6236316101 --- Logical Sectors Read +0x01 0x030 6 86706774 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1794 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6390 --- Number of Hardware Resets +0x06 0x010 4 127 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/E60935A0FB08 b/SSD/Crucial/CT525/CT525MX300SSD1/E60935A0FB08 new file mode 100644 index 000000000..0438962ed --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/E60935A0FB08 @@ -0,0 +1,225 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR040 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 00:04:00 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1391) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 47 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 15 + 9 Power_On_Hours -O--CK 100 100 000 - 45484 + 12 Power_Cycle_Count -O--CK 100 100 000 - 308 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 16 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 155 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 072 052 000 - 28 (Min/Max 14/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 15 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 1 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 5162011501 +247 Host_Program_Page_Count -O--CK 100 100 000 - 161313065 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 158037881 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1922 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 36 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: read failure 90% 45478 1086680 +# 2 Short offline Completed without error 00% 45461 - +# 3 Short offline Completed without error 00% 45437 - +# 4 Short offline Completed without error 00% 45413 - +# 5 Short offline Completed without error 00% 45389 - +# 6 Short offline Completed without error 00% 45365 - +# 7 Short offline Completed without error 00% 45341 - +# 8 Short offline Completed without error 00% 45317 - +# 9 Short offline Completed without error 00% 45293 - +#10 Short offline Completed without error 00% 45269 - +#11 Short offline Completed without error 00% 45245 - +#12 Short offline Completed without error 00% 45222 - +#13 Short offline Completed without error 00% 45198 - +#14 Short offline Completed without error 00% 45174 - +#15 Short offline Completed without error 00% 45150 - +#16 Short offline Completed without error 00% 45126 - +#17 Short offline Completed without error 00% 45102 - +#18 Short offline Completed without error 00% 45078 - +#19 Short offline Completed without error 00% 45054 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 28/29 Celsius +Lifetime Min/Max Temperature: 14/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (424) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 308 --- Lifetime Power-On Resets +0x01 0x010 4 45484 --- Power-on Hours +0x01 0x018 6 5162011501 --- Logical Sectors Written +0x01 0x020 6 89328855 --- Number of Write Commands +0x01 0x028 6 13897543650 --- Logical Sectors Read +0x01 0x030 6 105267321 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 313 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 28 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1273 --- Number of Hardware Resets +0x06 0x010 4 73 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT750/CT750MX300SSD1/EC471B8F9F10 b/SSD/Crucial/CT750/CT750MX300SSD1/EC471B8F9F10 new file mode 100644 index 000000000..f48b01399 --- /dev/null +++ b/SSD/Crucial/CT750/CT750MX300SSD1/EC471B8F9F10 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT750MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR011 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Mar 9 17:07:08 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1987) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 19 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 9 + 9 Power_On_Hours -O--CK 100 100 000 - 1430 + 12 Power_Cycle_Count -O--CK 100 100 000 - 954 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 6 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 116 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 070 043 000 - 30 (Min/Max 12/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 9 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 4 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 1 +246 Total_LBAs_Written -O--CK 100 100 000 - 5372349120 +247 Host_Program_Page_Count -O--CK 100 100 000 - 168021186 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 64057806 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 3548 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 46 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 669 - +# 2 Conveyance offline Completed without error 00% 669 - +# 3 Extended offline Completed without error 00% 669 - +# 4 Extended offline Completed without error 00% 468 - +# 5 Short offline Completed without error 00% 468 - +# 6 Conveyance offline Completed without error 00% 468 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 24/32 Celsius +Lifetime Min/Max Temperature: 12/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 954 --- Lifetime Power-On Resets +0x01 0x010 4 1430 --- Power-on Hours +0x01 0x018 6 5372349120 --- Logical Sectors Written +0x01 0x020 6 23558555 --- Number of Write Commands +0x01 0x028 6 5968841381 --- Logical Sectors Read +0x01 0x030 6 58038888 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1309 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9894 --- Number of Hardware Resets +0x06 0x010 4 7470 --- Number of ASR Events +0x06 0x018 4 4 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT960/CT960BX500SSD1/0C445BBA3FAF b/SSD/Crucial/CT960/CT960BX500SSD1/0C445BBA3FAF new file mode 100644 index 000000000..389b6cf01 --- /dev/null +++ b/SSD/Crucial/CT960/CT960BX500SSD1/0C445BBA3FAF @@ -0,0 +1,143 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT960BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR022 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 7 07:09:48 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 000 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14951 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2021 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +173 Ave_Block-Erase_Count -O--CK 024 024 000 - 486 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1937 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 222 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 036 000 - 33 (Min/Max 9/64) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 10 +202 Percent_Lifetime_Remain ----CK 076 076 001 - 24 +206 Write_Error_Rate -OSR-- 000 000 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 190990205885 +247 Host_Program_Page_Count -O--CK 100 100 000 - 5968443933 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 13538602560 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Invalid Error Log index = 0x0000 (reserved = 0x00) +Device Error Count: 12 (possibly also invalid) + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2021 --- Lifetime Power-On Resets +0x01 0x010 4 14951 --- Power-on Hours +0x01 0x018 6 2011644861 --- Logical Sectors Written +0x01 0x020 6 2587016507 --- Number of Write Commands +0x01 0x028 6 511728118 --- Logical Sectors Read +0x01 0x030 6 687106933 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/M4/M4-CT064M4SSD2/3F109BA14D75 b/SSD/Crucial/M4/M4-CT064M4SSD2/3F109BA14D75 new file mode 100644 index 000000000..b26c4a769 --- /dev/null +++ b/SSD/Crucial/M4/M4-CT064M4SSD2/3F109BA14D75 @@ -0,0 +1,203 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD m4/C400/P400 +Device Model: M4-CT064M4SSD2 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 040H +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 10 15:30:52 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 295) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 001 - 57611 + 12 Power_Cycle_Count -O--CK 100 100 001 - 167 +170 Grown_Failing_Block_Ct PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 001 - 0 +172 Erase_Fail_Count -O--CK 100 100 001 - 0 +173 Wear_Leveling_Count PO--CK 219 219 010 - 4139 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 001 - 128 +181 Non4k_Aligned_Access -O---K 100 100 001 - 960 590 370 +183 SATA_Iface_Downshift -O--CK 100 100 001 - 0 +184 End-to-End_Error PO--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 001 - 0 +188 Command_Timeout -O--CK 100 100 001 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 001 - 48 +194 Temperature_Celsius -O---K 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 796 +196 Reallocated_Event_Count -O--CK 100 100 001 - 0 +197 Current_Pending_Sector -O--CK 100 100 001 - 0 +198 Offline_Uncorrectable ----CK 100 100 001 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0 +202 Perc_Rated_Life_Used ---RC- 219 219 001 - 137 +206 Write_Error_Rate -OSR-- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 3449 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log size 3449 not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 11378 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (214) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 167 --- Lifetime Power-On Resets +0x01 0x010 4 57611 --- Power-on Hours +0x01 0x018 6 215884022668 --- Logical Sectors Written +0x01 0x020 6 3505288273 --- Number of Write Commands +0x01 0x028 6 1547253440 --- Logical Sectors Read +0x01 0x030 6 35848971 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 0 --- Current Temperature +0x05 0x010 1 0 --- Average Short Term Temperature +0x05 0x018 1 0 --- Average Long Term Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 0 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 0 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/M4/M4-CT064M4SSD2/E15CC8DF3034 b/SSD/Crucial/M4/M4-CT064M4SSD2/E15CC8DF3034 new file mode 100644 index 000000000..8c42498ed --- /dev/null +++ b/SSD/Crucial/M4/M4-CT064M4SSD2/E15CC8DF3034 @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD m4/C400/P400 +Device Model: M4-CT064M4SSD2 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 040H +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 10 15:30:52 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 295) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 001 - 55336 + 12 Power_Cycle_Count -O--CK 100 100 001 - 177 +170 Grown_Failing_Block_Ct PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 001 - 0 +172 Erase_Fail_Count -O--CK 100 100 001 - 0 +173 Wear_Leveling_Count PO--CK 235 235 010 - 3648 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 001 - 101 +181 Non4k_Aligned_Access -O---K 100 100 001 - 854 777 76 +183 SATA_Iface_Downshift -O--CK 100 100 001 - 0 +184 End-to-End_Error PO--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 001 - 0 +188 Command_Timeout -O--CK 100 100 001 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 001 - 48 +194 Temperature_Celsius -O---K 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 122 +196 Reallocated_Event_Count -O--CK 100 100 001 - 0 +197 Current_Pending_Sector -O--CK 100 100 001 - 0 +198 Offline_Uncorrectable ----CK 100 100 001 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0 +202 Perc_Rated_Life_Used ---RC- 235 235 001 - 121 +206 Write_Error_Rate -OSR-- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 3449 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log size 3449 not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (206) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 177 --- Lifetime Power-On Resets +0x01 0x010 4 55336 --- Power-on Hours +0x01 0x018 6 213893550455 --- Logical Sectors Written +0x01 0x020 6 3369933391 --- Number of Write Commands +0x01 0x028 6 808691017 --- Logical Sectors Read +0x01 0x030 6 16629722 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 0 --- Current Temperature +0x05 0x010 1 0 --- Average Short Term Temperature +0x05 0x018 1 0 --- Average Long Term Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 0 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 0 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/M4/M4-CT128M4SSD2/49C89E24EBD9 b/SSD/Crucial/M4/M4-CT128M4SSD2/49C89E24EBD9 new file mode 100644 index 000000000..f6e96661b --- /dev/null +++ b/SSD/Crucial/M4/M4-CT128M4SSD2/49C89E24EBD9 @@ -0,0 +1,200 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD m4/C400/P400 +Device Model: M4-CT128M4SSD2 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 0309 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 07:17:19 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 595) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 001 - 11559 + 12 Power_Cycle_Count -O--CK 100 100 001 - 2452 +170 Grown_Failing_Block_Ct PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 001 - 0 +172 Erase_Fail_Count -O--CK 100 100 001 - 0 +173 Wear_Leveling_Count PO--CK 097 097 010 - 110 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 001 - 0 +181 Non4k_Aligned_Access -O---K 100 100 001 - 2472 597 1875 +183 SATA_Iface_Downshift -O--CK 100 100 001 - 0 +184 End-to-End_Error PO--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 001 - 0 +188 Command_Timeout -O--CK 100 100 001 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 001 - 83 +194 Temperature_Celsius -O---K 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 32 +196 Reallocated_Event_Count -O--CK 100 100 001 - 0 +197 Current_Pending_Sector -O--CK 100 100 001 - 0 +198 Offline_Uncorrectable ----CK 100 100 001 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 133 +202 Perc_Rated_Life_Used ---RC- 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 3449 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log size 3449 not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (64) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2452 --- Lifetime Power-On Resets +0x01 0x010 4 11559 --- Power-on Hours +0x01 0x018 6 14297602818 --- Logical Sectors Written +0x01 0x020 6 333662518 --- Number of Write Commands +0x01 0x028 6 26907296864 --- Logical Sectors Read +0x01 0x030 6 470833933 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 0 --- Current Temperature +0x05 0x010 1 0 --- Average Short Term Temperature +0x05 0x018 1 0 --- Average Long Term Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 0 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 0 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 133 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/M4/M4-CT256M4SSD2/62737832D42C b/SSD/Crucial/M4/M4-CT256M4SSD2/62737832D42C new file mode 100644 index 000000000..101edc61b --- /dev/null +++ b/SSD/Crucial/M4/M4-CT256M4SSD2/62737832D42C @@ -0,0 +1,199 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD m4/C400/P400 +Device Model: M4-CT256M4SSD2 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 040H +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Dec 27 15:46:58 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1190) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 19) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 001 - 535 + 12 Power_Cycle_Count -O--CK 100 100 001 - 385 +170 Grown_Failing_Block_Ct PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 001 - 0 +172 Erase_Fail_Count -O--CK 100 100 001 - 0 +173 Wear_Leveling_Count PO--CK 100 100 010 - 14 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 001 - 193 +181 Non4k_Aligned_Access -O---K 100 100 001 - 3 1 2 +183 SATA_Iface_Downshift -O--CK 100 100 001 - 0 +184 End-to-End_Error PO--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 001 - 0 +188 Command_Timeout -O--CK 100 100 001 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 001 - 111 +194 Temperature_Celsius -O---K 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 0 +196 Reallocated_Event_Count -O--CK 100 100 001 - 0 +197 Current_Pending_Sector -O--CK 100 100 001 - 0 +198 Offline_Uncorrectable ----CK 100 100 001 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 134 +202 Perc_Rated_Life_Used ---RC- 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 3449 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log size 3449 not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (387) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 385 --- Lifetime Power-On Resets +0x01 0x010 4 535 --- Power-on Hours +0x01 0x018 6 3933034166 --- Logical Sectors Written +0x01 0x020 6 21964881 --- Number of Write Commands +0x01 0x028 6 4844151889 --- Logical Sectors Read +0x01 0x030 6 44168953 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 0 --- Current Temperature +0x05 0x010 1 0 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 0 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 202 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 134 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 25 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/DEXP/SSD C100/SSD C100 128Gb/1A3B484A6066 b/SSD/DEXP/SSD C100/SSD C100 128Gb/1A3B484A6066 new file mode 100644 index 000000000..3dd7b7366 --- /dev/null +++ b/SSD/DEXP/SSD C100/SSD C100 128Gb/1A3B484A6066 @@ -0,0 +1,95 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: DEXP SSD C100 128Gb +Serial Number: -- +Firmware Version: X0423C0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Feb 16 18:06:46 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 7 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 39 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 13 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1045 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 31 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 2548 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 825 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1311 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/DEXP/SSD C100/SSD C100 128Gb/3103BAB5015B b/SSD/DEXP/SSD C100/SSD C100 128Gb/3103BAB5015B new file mode 100644 index 000000000..0dd5d4f60 --- /dev/null +++ b/SSD/DEXP/SSD C100/SSD C100 128Gb/3103BAB5015B @@ -0,0 +1,163 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: DEXP SSD C100 128Gb +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jun 22 13:51:28 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2097 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1338 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 45120 +165 Unknown_Attribute -O--CK 100 100 050 - 98 +166 Unknown_Attribute -O--CK 100 100 050 - 30 +167 Unknown_Attribute -O--CK 100 100 050 - 90 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 510 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 113151 +242 Total_LBAs_Read ----CK 100 100 050 - 72700 +245 Unknown_Attribute -O--CK 100 100 050 - 91322 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1966 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1338 --- Lifetime Power-On Resets +0x01 0x010 4 2097 --- Power-on Hours +0x01 0x018 6 3120498409 --- Logical Sectors Written +0x01 0x020 6 42012155 --- Number of Write Commands +0x01 0x028 6 469532517 --- Logical Sectors Read +0x01 0x030 6 43314721 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Delkin Devices/CE08/CE08TQJGS-FD000-D/DBD952A814BF b/SSD/Delkin Devices/CE08/CE08TQJGS-FD000-D/DBD952A814BF new file mode 100644 index 000000000..d40eb360c --- /dev/null +++ b/SSD/Delkin Devices/CE08/CE08TQJGS-FD000-D/DBD952A814BF @@ -0,0 +1,57 @@ +smartctl 7.3 2022-02-28 r5338 [NetBSD 10.1_STABLE i386] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Delkin Devices CE08TQJGS-FD000-D +Serial Number: -- +Firmware Version: 18/10/19 +User Capacity: 8,195,604,480 bytes [8.19 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ATA8-ACS (minor revision not indicated) +Local Time is: Sat Jan 18 01:45:09 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE +196 Reallocated_Event_Count 0x0003 100 100 010 Pre-fail Always - 186 (0 47616) +213 Unknown_Attribute 0x0002 100 100 010 Old_age Always - 1509949530 +229 Unknown_Attribute 0x0002 100 100 010 Old_age Always - 4837 +203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1753 +204 Soft_ECC_Correction 0x0002 100 100 000 Old_age Always - 1753 +199 UDMA_CRC_Error_Count 0x0002 100 100 000 Old_age Always - 0 +232 Available_Reservd_Space 0x0002 100 100 000 Old_age Always - 20018078 + 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 108 +241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 218 +242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 234 +214 Unknown_Attribute 0x0002 100 100 000 Old_age Always - 1 +215 Unknown_Attribute 0x0002 067 067 --- Old_age Always - 0 +194 Temperature_Celsius 0x0002 022 026 000 Old_age Always - 22 (Min/Max 15/26) + +Read SMART Error Log failed: request failed, error code 0x02 + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + diff --git a/SSD/Dell/SSDSCKKB240/SSDSCKKB240G8R/8ADA1B551BF9 b/SSD/Dell/SSDSCKKB240/SSDSCKKB240G8R/8ADA1B551BF9 new file mode 100644 index 000000000..a19e06acd --- /dev/null +++ b/SSD/Dell/SSDSCKKB240/SSDSCKKB240G8R/8ADA1B551BF9 @@ -0,0 +1,113 @@ +smartctl 7.5 2025-04-30 r5714 [OpenBSD 7.8 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs +Device Model: SSDSCKKB240G8R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: XC31DL6R +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 25 12:19:36 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 36) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000e 130 130 039 Old_age Always - 149374643 + 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 26453 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 340 + 13 Read_Soft_Error_Rate 0x001e 086 086 000 Old_age Always - 14469894194867 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 71 +174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 91 +175 Program_Fail_Count_Chip 0x0012 100 100 010 Old_age Always - 69 +179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 2558 +181 Program_Fail_Cnt_Total 0x003a 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x003a 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 26 +195 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +201 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2229 (344 65535) +202 End_of_Life 0x0027 100 100 000 Pre-fail Always - 0 +233 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 131074 +234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 +235 Unknown_Attribute 0x000b 100 100 000 Pre-fail Always - 131074 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 131074 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 107747 +245 Percent_Life_Remaining 0x0032 100 100 000 Old_age Always - 100 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 38 - +# 2 Short offline Completed without error 00% 37 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/Dogfish/SSD/SSD 1TB/48D4B5B06429 b/SSD/Dogfish/SSD/SSD 1TB/48D4B5B06429 new file mode 100644 index 000000000..c9aa721be --- /dev/null +++ b/SSD/Dogfish/SSD/SSD 1TB/48D4B5B06429 @@ -0,0 +1,161 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Dogfish SSD 1TB +Serial Number: -- +Firmware Version: W0303B0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 30 14:19:11 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 8144 + 12 Power_Cycle_Count -O--CK 100 100 050 - 875 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 34347 +165 Unknown_Attribute -O--CK 100 100 050 - 104 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 51 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 117 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 493913 +242 Total_LBAs_Read ----CK 100 100 050 - 556583 +245 Unknown_Attribute -O--CK 100 100 050 - 324960 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 875 --- Lifetime Power-On Resets +0x01 0x010 4 8144 --- Power-on Hours +0x01 0x018 6 2304334953 --- Logical Sectors Written +0x01 0x020 6 519013497 --- Number of Write Commands +0x01 0x028 6 2116500871 --- Logical Sectors Read +0x01 0x030 6 409948399 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Dogfish/SSD/SSD 1TB/D9929332402C b/SSD/Dogfish/SSD/SSD 1TB/D9929332402C new file mode 100644 index 000000000..00935824a --- /dev/null +++ b/SSD/Dogfish/SSD/SSD 1TB/D9929332402C @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Dogfish SSD 1TB +Serial Number: -- +Firmware Version: T0910A0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 2 21:26:21 2025 AKDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 28662 + 12 Power_Cycle_Count -O--CK 100 100 050 - 150 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 72912 +165 Unknown_Attribute -O--CK 100 100 050 - 923 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 101 +168 Unknown_Attribute -O--CK 100 100 050 - 1500 +169 Unknown_Attribute -O--CK 100 100 050 - 94 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 55 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 6820 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 620274 +242 Total_LBAs_Read ----CK 100 100 050 - 32414 +245 Unknown_Attribute -O--CK 100 100 050 - 709298 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 150 --- Lifetime Power-On Resets +0x01 0x010 4 28662 --- Power-on Hours +0x01 0x018 6 1995630729 --- Logical Sectors Written +0x01 0x020 6 1740915983 --- Number of Write Commands +0x01 0x028 6 2124332449 --- Logical Sectors Read +0x01 0x030 6 17852138 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Dogfish/SSD/SSD 256GB/5D0B726CD37F b/SSD/Dogfish/SSD/SSD 256GB/5D0B726CD37F new file mode 100644 index 000000000..decc8e4c3 --- /dev/null +++ b/SSD/Dogfish/SSD/SSD 256GB/5D0B726CD37F @@ -0,0 +1,164 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: DOGFISH SSD 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R6325 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 19 22:38:52 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1277 + 12 Power_Cycle_Count -O--CK 100 100 000 - 41 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 9675 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 3 +166 Unknown_Attribute -O--CK 100 100 000 - 96 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 29 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 7027389 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 45 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 6 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 269 +242 Total_LBAs_Read -O--CK 100 100 000 - 247 +249 Unknown_Attribute -O--CK 100 100 000 - 727 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 284 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 1277 --- Power-on Hours +0x01 0x018 6 564592315 --- Logical Sectors Written +0x01 0x020 6 24540315 --- Number of Write Commands +0x01 0x028 6 520037230 --- Logical Sectors Read +0x01 0x030 6 4548345 --- Number of Read Commands +0x01 0x038 6 4596714217 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 77 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/EAGET/SSD/SSD 256GB/5C550877B7E9 b/SSD/EAGET/SSD/SSD 256GB/5C550877B7E9 new file mode 100644 index 000000000..4be70ee67 --- /dev/null +++ b/SSD/EAGET/SSD/SSD 256GB/5C550877B7E9 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: EAGET SSD 256GB +Serial Number: -- +Firmware Version: X0327A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 8 23:33:24 2025 +03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 197 + 12 Power_Cycle_Count -O--CK 100 100 050 - 47 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 24 +164 Unknown_Attribute -O--CK 100 100 050 - 1486 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 20 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 2240 +242 Total_LBAs_Read ----CK 100 100 050 - 2202 +245 Unknown_Attribute -O--CK 100 100 050 - 322 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 17/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 197 --- Power-on Hours +0x01 0x018 6 146826631 --- Logical Sectors Written +0x01 0x020 6 1907526 --- Number of Write Commands +0x01 0x028 6 144332181 --- Logical Sectors Read +0x01 0x030 6 1255922 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/EMTEC/X150/X150 240GB/00AD231F08DF b/SSD/EMTEC/X150/X150 240GB/00AD231F08DF new file mode 100644 index 000000000..327862329 --- /dev/null +++ b/SSD/EMTEC/X150/X150 240GB/00AD231F08DF @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: EMTEC X150 240GB +Serial Number: -- +Firmware Version: V0922A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 30 16:08:09 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 7655 + 12 Power_Cycle_Count -O--CK 100 100 050 - 26 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 14 +164 Unknown_Attribute -O--CK 100 100 050 - 7732 +165 Unknown_Attribute -O--CK 100 100 050 - 53 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 21 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 24 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 78891 +242 Total_LBAs_Read ----CK 100 100 050 - 1036 +245 Unknown_Attribute -O--CK 100 100 050 - 34222 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 18/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 7655 --- Power-on Hours +0x01 0x018 6 875294054 --- Logical Sectors Written +0x01 0x020 6 78170560 --- Number of Write Commands +0x01 0x028 6 67902375 --- Logical Sectors Read +0x01 0x030 6 1959831 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/EVM/EVM25/EVM25-256GB/C7F8E737BA23 b/SSD/EVM/EVM25/EVM25-256GB/C7F8E737BA23 new file mode 100644 index 000000000..8eccbaaaa --- /dev/null +++ b/SSD/EVM/EVM25/EVM25-256GB/C7F8E737BA23 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: EVM25/256GB +Serial Number: -- +Firmware Version: W0704A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 25 04:03:07 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1449 + 12 Power_Cycle_Count -O--CK 100 100 050 - 42 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 6423 +165 Unknown_Attribute -O--CK 100 100 050 - 11 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 7 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 36 +194 Temperature_Celsius -O---K 100 100 050 - 44 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 20171 +242 Total_LBAs_Read ----CK 100 100 050 - 265 +245 Unknown_Attribute -O--CK 100 100 050 - 32308 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 44/44 Celsius +Lifetime Min/Max Temperature: 23/53 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 42 --- Lifetime Power-On Resets +0x01 0x010 4 1449 --- Power-on Hours +0x01 0x018 6 1321940052 --- Logical Sectors Written +0x01 0x020 6 63983242 --- Number of Write Commands +0x01 0x028 6 17393837 --- Logical Sectors Read +0x01 0x030 6 312474 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Eluktro/TRO-SSD7/TRO-SSD7-500GB/8D82B08130CD b/SSD/Eluktro/TRO-SSD7/TRO-SSD7-500GB/8D82B08130CD new file mode 100644 index 000000000..3c6c4a0e0 --- /dev/null +++ b/SSD/Eluktro/TRO-SSD7/TRO-SSD7-500GB/8D82B08130CD @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-STABLE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TRO-SSD7-500GB +Serial Number: -- +LU WWN Device Id: 0 000120 ... +Firmware Version: 560ABBF0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 26 06:48:05 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 25) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 057 057 003 - 46 + 9 Power_On_Hours -O--CK 100 100 000 - 462 (118 102 0) + 12 Power_Cycle_Count -O--CK 100 100 000 - 231 +171 Unknown_Attribute -O-R-- 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute ----CK 000 000 000 - 93 +177 Wear_Leveling_Count ------ 000 000 000 - 93 +181 Program_Fail_Cnt_Total -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +190 Airflow_Temperature_Cel ------ 040 073 000 - 40 (Min/Max 12/73) +194 Temperature_Celsius -O---K 040 073 000 - 40 (Min/Max 12/73) +195 Hardware_ECC_Recovered --SRC- 120 120 000 - 0 +196 Reallocated_Event_Count PO--CK 057 057 003 - 46 +201 Unknown_SSD_Attribute --SRC- 120 120 000 - 0 +204 Soft_ECC_Correction --SRC- 120 120 000 - 0 +230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +231 Unknown_SSD_Attribute PO--C- 075 075 010 - 94489280512 +233 Media_Wearout_Indicator -O--CK 000 000 000 - 8206 +234 Unknown_Attribute -O--CK 000 000 000 - 2810 +241 Total_LBAs_Written -O--CK 000 000 000 - 2810 +242 Total_LBAs_Read -O--CK 000 000 000 - 1136 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 12/73 Celsius +Lifetime Min/Max Temperature: 12/73 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (356) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 231 --- Lifetime Power-On Resets +0x01 0x010 4 462 --- Power-on Hours +0x01 0x018 6 5893734201 --- Logical Sectors Written +0x01 0x028 6 2384188117 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 40 --- Average Long Term Temperature +0x05 0x020 1 73 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 380 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 240 --- Number of Hardware Resets +0x06 0x010 4 7632 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/ExeGate/EX2782/EX278215RUS(60GB)/60ADCE1B450F b/SSD/ExeGate/EX2782/EX278215RUS(60GB)/60ADCE1B450F new file mode 100644 index 000000000..637fa1c6a --- /dev/null +++ b/SSD/ExeGate/EX2782/EX278215RUS(60GB)/60ADCE1B450F @@ -0,0 +1,308 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: EX278215RUS(60GB) +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW201105 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 5 02:46:11 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4698 + 12 Power_Cycle_Count -O--CK 100 100 050 - 125 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 280 +164 Unknown_Attribute -O--CK 100 100 050 - 31 +165 Unknown_Attribute -O--CK 100 100 050 - 84 +166 Unknown_Attribute -O--CK 100 100 050 - 26 +167 Unknown_Attribute -O--CK 100 100 050 - 57 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 270236 +177 Wear_Leveling_Count -O--CK 100 100 050 - 1203679 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 33554432 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 77 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 5 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 2 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 29387 +242 Total_LBAs_Read -O--CK 100 100 050 - 26656 +249 Unknown_Attribute -O--CK 100 100 050 - 37096 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 27 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 27 [2] occurred at disk power-on lifetime: 1902 hours (79 days + 6 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 20 0b 00 00 85 00 00 b1 51 00 8203 sectors at LBA = 0x850000b1 = 2231369905 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 20 0b 00 00 85 00 00 b1 40 00 00:00:50.030 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 bd 40 00 00:00:50.030 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 bc 40 00 00:00:50.030 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 bb 40 00 00:00:50.030 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 ba 40 00 00:00:50.030 READ DMA EXT + +Error 26 [1] occurred at disk power-on lifetime: 1902 hours (79 days + 6 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 20 0b 00 00 5e 00 00 7b 51 00 8203 sectors at LBA = 0x5f00007b = 1593835643 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 20 0b 00 00 5e 00 00 7b 40 00 00:00:16.650 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 6e 40 00 00:00:16.650 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 6d 40 00 00:00:16.650 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 6c 40 00 00:00:16.650 READ DMA EXT + 25 00 00 00 01 00 00 18 00 00 6b 40 00 00:00:16.650 READ DMA EXT + +Error 25 [0] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- a0 00 00 00 00 00 00 00 00 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 08 6d+09:15:00.170 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 a0 08 6d+09:15:00.010 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 a0 0c 6d+09:15:00.010 NOP [Abort queued commands] + 51 00 04 00 00 00 00 00 00 00 00 a0 ff 6d+09:14:59.900 CONFIGURE STREAM + +Error 24 [3] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- a0 00 00 00 00 00 00 00 00 51 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 08 6d+09:14:59.900 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 a0 08 6d+09:14:59.740 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 a0 0c 6d+09:14:59.740 NOP [Abort queued commands] + 51 00 04 00 00 00 00 00 00 00 00 a0 ff 6d+09:14:59.630 CONFIGURE STREAM + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 2524 - +# 2 Offline Self-test routine in progress 10% 2524 - +# 3 Offline Self-test routine in progress 10% 2524 - +# 4 Offline Self-test routine in progress 10% 2524 - +# 5 Offline Self-test routine in progress 10% 2524 - +# 6 Offline Self-test routine in progress 10% 2524 - +# 7 Offline Self-test routine in progress 10% 2524 - +# 8 Offline Self-test routine in progress 10% 2524 - +# 9 Offline Self-test routine in progress 10% 2524 - +#10 Offline Self-test routine in progress 10% 2524 - +#11 Offline Self-test routine in progress 10% 2524 - +#12 Offline Self-test routine in progress 10% 2524 - +#13 Offline Self-test routine in progress 10% 2524 - +#14 Offline Self-test routine in progress 10% 2524 - +#15 Offline Self-test routine in progress 10% 2524 - +#16 Offline Self-test routine in progress 10% 2524 - +#17 Offline Self-test routine in progress 10% 2524 - +#18 Offline Self-test routine in progress 10% 2524 - +#19 Offline Self-test routine in progress 10% 2524 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 125 --- Lifetime Power-On Resets +0x01 0x010 4 4698 --- Power-on Hours +0x01 0x018 6 1925906432 --- Logical Sectors Written +0x01 0x020 6 44490132 --- Number of Write Commands +0x01 0x028 6 1746927616 --- Logical Sectors Read +0x01 0x030 6 17292678 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 577 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 607 Device-to-host register FISes sent due to a COMRESET +0x000b 4 26845 CRC errors within host-to-device FIS +0x000d 4 26845 Non-CRC errors within host-to-device FIS + diff --git a/SSD/FIKWOT/FS810/FS810 250GB/5A0F732E62EC b/SSD/FIKWOT/FS810/FS810 250GB/5A0F732E62EC new file mode 100644 index 000000000..c724eff2c --- /dev/null +++ b/SSD/FIKWOT/FS810/FS810 250GB/5A0F732E62EC @@ -0,0 +1,180 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FIKWOT FS810 250GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN14546 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 10 12:27:28 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4499 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 131076 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 100 100 000 - 416629325994 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 37598 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 90 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +194 Temperature_Celsius -O---K 045 045 000 - 45 (Min/Max 34/52) +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--CK 100 000 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 97 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 267 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 170 +241 Total_LBAs_Written -O--CK 100 100 000 - 6409 +242 Total_LBAs_Read -O--CK 100 100 000 - 28 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: ?/52 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (171) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 4499 --- Power-on Hours +0x01 0x018 6 13441702927 --- Logical Sectors Written +0x01 0x020 6 126640033 --- Number of Write Commands +0x01 0x028 6 59826167 --- Logical Sectors Read +0x01 0x030 6 2071976 --- Number of Read Commands +0x01 0x038 6 4078962624716 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 35 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FIKWOT/FS810/FS810 512GB/FF5A1ADFF518 b/SSD/FIKWOT/FS810/FS810 512GB/FF5A1ADFF518 new file mode 100644 index 000000000..67c3dc5a7 --- /dev/null +++ b/SSD/FIKWOT/FS810/FS810 512GB/FF5A1ADFF518 @@ -0,0 +1,159 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FIKWOT FS810 512GB +Serial Number: -- +Firmware Version: X0418B0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 1 03:51:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5 + 12 Power_Cycle_Count -O--CK 100 100 050 - 14 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 88 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 997 +242 Total_LBAs_Read ----CK 100 100 050 - 152 +245 Unknown_Attribute -O--CK 100 100 050 - 24 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 54 Celsius +Power Cycle Min/Max Temperature: 54/54 Celsius +Lifetime Min/Max Temperature: 25/54 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 65358069 --- Logical Sectors Written +0x01 0x020 6 684418 --- Number of Write Commands +0x01 0x028 6 9989602 --- Logical Sectors Read +0x01 0x030 6 201398 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 90 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/FIKWOT/FX815/FX815 2TB/4DDCCB57C04A b/SSD/FIKWOT/FX815/FX815 2TB/4DDCCB57C04A new file mode 100644 index 000000000..5aad88299 --- /dev/null +++ b/SSD/FIKWOT/FX815/FX815 2TB/4DDCCB57C04A @@ -0,0 +1,183 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FIKWOT FX815 2TB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN13195 +User Capacity: 2,048,408,248,320 bytes [2.04 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 16 16:01:30 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 7855 + 12 Power_Cycle_Count ------+ 100 100 000 - 46 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 196614 +171 Unknown_Attribute ------+ 000 000 000 - 0 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 4295098369 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 237 +187 Reported_Uncorrect ------+ 100 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 33 +194 Temperature_Celsius ------+ 038 038 000 - 38 (Min/Max 35/54) +206 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 2 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +210 Unknown_Attribute ------+ 200 200 000 - 4 +211 Unknown_Attribute ------+ 200 200 000 - 2 +231 Unknown_SSD_Attribute ------+ 100 100 005 - 0 +241 Total_LBAs_Written ------+ 100 100 000 - 82 +242 Total_LBAs_Read ------+ 100 100 000 - 11 +245 Unknown_Attribute ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: ?/42 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (137) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 7855 --- Power-on Hours +0x01 0x018 6 172185320 --- Logical Sectors Written +0x01 0x020 6 460738 --- Number of Write Commands +0x01 0x028 6 24014668 --- Logical Sectors Read +0x01 0x030 6 162483 --- Number of Read Commands +0x01 0x038 6 5799385970320 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/FIKWOT/FX815/FX815 512GB/33BA98330FC6 b/SSD/FIKWOT/FX815/FX815 512GB/33BA98330FC6 new file mode 100644 index 000000000..b7c632e1a --- /dev/null +++ b/SSD/FIKWOT/FX815/FX815 512GB/33BA98330FC6 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FIKWOT FX815 512GB +Serial Number: -- +Firmware Version: W0419B0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 3 11:36:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 115 + 12 Power_Cycle_Count -O--CK 100 100 050 - 475 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 65 +164 Unknown_Attribute -O--CK 100 100 050 - 9202 +165 Unknown_Attribute -O--CK 100 100 050 - 6 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 5 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 300 +194 Temperature_Celsius -O---K 100 100 050 - 34 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 26063 +242 Total_LBAs_Read ----CK 100 100 050 - 21113 +245 Unknown_Attribute -O--CK 100 100 050 - 3945 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 34/34 Celsius +Lifetime Min/Max Temperature: 23/54 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 475 --- Lifetime Power-On Resets +0x01 0x010 4 115 --- Power-on Hours +0x01 0x018 6 1708104135 --- Logical Sectors Written +0x01 0x020 6 12131352 --- Number of Write Commands +0x01 0x028 6 1383699432 --- Logical Sectors Read +0x01 0x030 6 15820074 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/FORESEE/128/128GB SSD/3886C14D9198 b/SSD/FORESEE/128/128GB SSD/3886C14D9198 new file mode 100644 index 000000000..7418010c3 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/3886C14D9198 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 12 04:14:33 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 216 + 12 Power_Cycle_Count PO--CK 100 100 010 - 50 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 3924 +165 Unknown_Attribute PO--CK 100 100 010 - 10 +166 Unknown_Attribute PO--CK 100 100 010 - 1 +167 Unknown_Attribute PO--CK 100 100 010 - 3 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 194 +242 Total_LBAs_Read PO--CK 100 100 010 - 125 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/3E659CC70933 b/SSD/FORESEE/128/128GB SSD/3E659CC70933 new file mode 100644 index 000000000..b237597bf --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/3E659CC70933 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 31 11:22:14 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 13473 + 12 Power_Cycle_Count PO--CK 100 100 010 - 91 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 236953 +165 Unknown_Attribute PO--CK 100 100 010 - 297 +166 Unknown_Attribute PO--CK 100 100 010 - 73 +167 Unknown_Attribute PO--CK 100 100 010 - 216 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 8430 +242 Total_LBAs_Read PO--CK 100 100 010 - 141 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/4C76EDBCFE3B b/SSD/FORESEE/128/128GB SSD/4C76EDBCFE3B new file mode 100644 index 000000000..be7278482 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/4C76EDBCFE3B @@ -0,0 +1,136 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 3 10:28:43 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 4256 + 12 Power_Cycle_Count PO--CK 100 100 010 - 19 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 108690 +165 Unknown_Attribute PO--CK 100 100 010 - 131 +166 Unknown_Attribute PO--CK 100 100 010 - 45 +167 Unknown_Attribute PO--CK 100 100 010 - 98 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 2665 +242 Total_LBAs_Read PO--CK 100 100 010 - 204 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/5B5CE4317EEB b/SSD/FORESEE/128/128GB SSD/5B5CE4317EEB new file mode 100644 index 000000000..59f9c4502 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/5B5CE4317EEB @@ -0,0 +1,136 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 24 13:45:23 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 8056 + 12 Power_Cycle_Count PO--CK 100 100 010 - 81 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 293752 +165 Unknown_Attribute PO--CK 100 100 010 - 347 +166 Unknown_Attribute PO--CK 100 100 010 - 169 +167 Unknown_Attribute PO--CK 100 100 010 - 269 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 10042 +242 Total_LBAs_Read PO--CK 100 100 010 - 5333 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/7CAA12E4E059 b/SSD/FORESEE/128/128GB SSD/7CAA12E4E059 new file mode 100644 index 000000000..45988c5f4 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/7CAA12E4E059 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 2 21:02:29 2026 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 3 + 12 Power_Cycle_Count PO--CK 100 100 010 - 19 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 2181 +165 Unknown_Attribute PO--CK 100 100 010 - 5 +166 Unknown_Attribute PO--CK 100 100 010 - 2 +167 Unknown_Attribute PO--CK 100 100 010 - 4 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 306 +242 Total_LBAs_Read PO--CK 100 100 010 - 137 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/8ECBAE9C05F8 b/SSD/FORESEE/128/128GB SSD/8ECBAE9C05F8 new file mode 100644 index 000000000..86973eeb5 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/8ECBAE9C05F8 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Dec 26 20:56:48 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 340 + 12 Power_Cycle_Count PO--CK 100 100 010 - 30 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 31610 +165 Unknown_Attribute PO--CK 100 100 010 - 75 +166 Unknown_Attribute PO--CK 100 100 010 - 12 +167 Unknown_Attribute PO--CK 100 100 010 - 58 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 5032 +242 Total_LBAs_Read PO--CK 100 100 010 - 4194 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/8F5DE153C94B b/SSD/FORESEE/128/128GB SSD/8F5DE153C94B new file mode 100644 index 000000000..65befc9ae --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/8F5DE153C94B @@ -0,0 +1,136 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 5 12:17:44 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 1055 + 12 Power_Cycle_Count PO--CK 100 100 010 - 13 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 170377 +165 Unknown_Attribute PO--CK 100 100 010 - 205 +166 Unknown_Attribute PO--CK 100 100 010 - 100 +167 Unknown_Attribute PO--CK 100 100 010 - 157 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 16700 +242 Total_LBAs_Read PO--CK 100 100 010 - 14119 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/99540FDDA957 b/SSD/FORESEE/128/128GB SSD/99540FDDA957 new file mode 100644 index 000000000..c9a2ffd7c --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/99540FDDA957 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 16 13:07:52 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 291 + 12 Power_Cycle_Count PO--CK 100 100 010 - 39 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 8573 +165 Unknown_Attribute PO--CK 100 100 010 - 17 +166 Unknown_Attribute PO--CK 100 100 010 - 1 +167 Unknown_Attribute PO--CK 100 100 010 - 8 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 386 +242 Total_LBAs_Read PO--CK 100 100 010 - 3 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/AD47DC6E60D8 b/SSD/FORESEE/128/128GB SSD/AD47DC6E60D8 new file mode 100644 index 000000000..a098cc6cd --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/AD47DC6E60D8 @@ -0,0 +1,136 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 12 12:10:04 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 4310 + 12 Power_Cycle_Count PO--CK 100 100 010 - 55 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 34453 +165 Unknown_Attribute PO--CK 100 100 010 - 42 +166 Unknown_Attribute PO--CK 100 100 010 - 9 +167 Unknown_Attribute PO--CK 100 100 010 - 31 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 42 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 953 +242 Total_LBAs_Read PO--CK 100 100 010 - 38 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/128/128GB SSD/E40CDF25BCE6 b/SSD/FORESEE/128/128GB SSD/E40CDF25BCE6 new file mode 100644 index 000000000..c62f2bda3 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/E40CDF25BCE6 @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: P0921A +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon May 26 13:05:28 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 + 9 Power_On_Hours ------ 100 100 050 - 4460 + 12 Power_Cycle_Count ------ 100 100 050 - 51 +160 Unknown_Attribute ------ 100 100 050 - 0 +161 Unknown_Attribute ------ 100 100 050 - 125 +162 Unknown_Attribute ------ 100 100 050 - 1 +163 Unknown_Attribute ------ 100 100 050 - 6 +164 Unknown_Attribute ------ 100 100 050 - 291736 +165 Unknown_Attribute ------ 100 100 050 - 165 +166 Unknown_Attribute ------ 100 100 050 - 114 +167 Unknown_Attribute ------ 100 100 050 - 142 +168 Unknown_Attribute ------ 100 100 050 - 3000 +169 Unknown_Attribute ------ 096 096 050 - 96 +192 Power-Off_Retract_Count ------ 100 100 050 - 47 +194 Temperature_Celsius ------ 100 100 050 - 0 +195 Hardware_ECC_Recovered ------ 100 100 050 - 5 +196 Reallocated_Event_Count ------ 100 100 050 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +241 Total_LBAs_Written ------ 100 100 050 - 473659 +242 Total_LBAs_Read ------ 100 100 050 - 140090 +245 Unknown_Attribute ------ 100 100 050 - 541224 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x010 4 4460 --- Power-on Hours +0x01 0x018 6 976997694 --- Logical Sectors Written +0x01 0x020 6 647762266 --- Number of Write Commands +0x01 0x028 6 591058272 --- Logical Sectors Read +0x01 0x030 6 472912012 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 0 --- Current Temperature +0x05 0x010 1 -23 --- Average Short Term Temperature +0x05 0x018 1 1 --- Average Long Term Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 -1 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 -1 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 100 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 374 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 68 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/128/128GB SSD/F474BEF86B9B b/SSD/FORESEE/128/128GB SSD/F474BEF86B9B new file mode 100644 index 000000000..b0c4dce68 --- /dev/null +++ b/SSD/FORESEE/128/128GB SSD/F474BEF86B9B @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 3 13:55:40 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 27 + 12 Power_Cycle_Count PO--CK 100 100 010 - 59 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 45785 +165 Unknown_Attribute PO--CK 100 100 010 - 58 +166 Unknown_Attribute PO--CK 100 100 010 - 4 +167 Unknown_Attribute PO--CK 100 100 010 - 41 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 4859 +242 Total_LBAs_Read PO--CK 100 100 010 - 4099 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/256/256GB SSD/B026C785F636 b/SSD/FORESEE/256/256GB SSD/B026C785F636 new file mode 100644 index 000000000..6fb6c50a0 --- /dev/null +++ b/SSD/FORESEE/256/256GB SSD/B026C785F636 @@ -0,0 +1,124 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 256GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.6 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 10 23:59:41 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 36876 + 12 Power_Cycle_Count PO--CK 100 100 010 - 29 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 2504003 +165 Unknown_Attribute PO--CK 100 100 010 - 5567 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 5249 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 44 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 332000 +242 Total_LBAs_Read PO--CK 100 100 010 - 8797 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/32/32GB SSD/0DFCA3A0707C b/SSD/FORESEE/32/32GB SSD/0DFCA3A0707C new file mode 100644 index 000000000..2b6e19a65 --- /dev/null +++ b/SSD/FORESEE/32/32GB SSD/0DFCA3A0707C @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 32GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.0 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 2 21:44:52 2025 +03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 1 + 12 Power_Cycle_Count PO--CK 100 100 010 - 13 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 344 +165 Unknown_Attribute PO--CK 100 100 010 - 1 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 0 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 2 +242 Total_LBAs_Read PO--CK 100 100 010 - 0 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/32/32GB SSD/CCFE465BC0AA b/SSD/FORESEE/32/32GB SSD/CCFE465BC0AA new file mode 100644 index 000000000..d95cd62fd --- /dev/null +++ b/SSD/FORESEE/32/32GB SSD/CCFE465BC0AA @@ -0,0 +1,124 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 32GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.20.0 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 14 23:17:40 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 246 + 12 Power_Cycle_Count PO--CK 100 100 010 - 14 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 19469 +165 Unknown_Attribute PO--CK 100 100 010 - 28 +166 Unknown_Attribute PO--CK 100 100 010 - 1 +167 Unknown_Attribute PO--CK 100 100 010 - 13 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 47 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 121 +242 Total_LBAs_Read PO--CK 100 100 010 - 15 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/512/512GB SSD/4C4369CC7997 b/SSD/FORESEE/512/512GB SSD/4C4369CC7997 new file mode 100644 index 000000000..296fd7a10 --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/4C4369CC7997 @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN14546 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 4 13:27:46 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2823 + 12 Power_Cycle_Count -O--C- 100 100 000 - 31 +164 Unknown_Attribute ------ 100 100 000 - 38657916955 +165 Unknown_Attribute ------ 100 100 000 - 49 +166 Unknown_Attribute ------ 100 100 000 - 9 +167 Unknown_Attribute -O---K 100 100 000 - 27 +194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 26/42) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 2202 +242 Total_LBAs_Read -O--CK 100 100 000 - 440 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (236) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 2823 --- Power-on Hours +0x01 0x018 6 4618004637 --- Logical Sectors Written +0x01 0x020 6 38811718 --- Number of Write Commands +0x01 0x028 6 924367471 --- Logical Sectors Read +0x01 0x030 6 11061998 --- Number of Read Commands +0x01 0x038 6 2600028447988 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/512/512GB SSD/4FF747B4108E b/SSD/FORESEE/512/512GB SSD/4FF747B4108E new file mode 100644 index 000000000..60578c966 --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/4FF747B4108E @@ -0,0 +1,176 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Dec 5 19:49:11 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 372 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 0 +165 Unknown_Attribute ------ 100 100 000 - 0 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius -O---K 036 036 000 - 36 (Min/Max 12/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1856 +242 Total_LBAs_Read -O--CK 100 100 000 - 547 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (19) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 9 --- Power-on Hours +0x01 0x018 6 121638515 --- Logical Sectors Written +0x01 0x020 6 1807968 --- Number of Write Commands +0x01 0x028 6 35863104 --- Logical Sectors Read +0x01 0x030 6 1137347 --- Number of Read Commands +0x01 0x038 6 4326832696 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/512/512GB SSD/549B388A8F74 b/SSD/FORESEE/512/512GB SSD/549B388A8F74 new file mode 100644 index 000000000..396242c9a --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/549B388A8F74 @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jan 25 14:45:47 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 447 + 12 Power_Cycle_Count -O--C- 100 100 000 - 39 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 297 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 65537 +165 Unknown_Attribute ------ 100 100 000 - 1 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 1 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius -O---K 029 029 000 - 29 (Min/Max 12/42) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 3979 +242 Total_LBAs_Read -O--CK 100 100 000 - 762 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (41) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 39 --- Lifetime Power-On Resets +0x01 0x010 4 447 --- Power-on Hours +0x01 0x018 6 260769745 --- Logical Sectors Written +0x01 0x020 6 3075238 --- Number of Write Commands +0x01 0x028 6 49995430 --- Logical Sectors Read +0x01 0x030 6 1936865 --- Number of Read Commands +0x01 0x038 6 413929354616 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/512/512GB SSD/64E589BB3723 b/SSD/FORESEE/512/512GB SSD/64E589BB3723 new file mode 100644 index 000000000..205b3f06c --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/64E589BB3723 @@ -0,0 +1,176 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 9 19:07:44 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 482 + 12 Power_Cycle_Count -O--C- 100 100 000 - 23 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 442 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 8590262276 +165 Unknown_Attribute ------ 100 100 000 - 5 +166 Unknown_Attribute ------ 100 100 000 - 2 +167 Unknown_Attribute -O---K 100 100 000 - 4 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius -O---K 039 039 000 - 39 (Min/Max 12/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 16825 +242 Total_LBAs_Read -O--CK 100 100 000 - 6094 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (26) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 482 --- Power-on Hours +0x01 0x018 6 1102695466 --- Logical Sectors Written +0x01 0x020 6 28783288 --- Number of Write Commands +0x01 0x028 6 399425053 --- Logical Sectors Read +0x01 0x030 6 2840445 --- Number of Read Commands +0x01 0x038 6 444119795888 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/512/512GB SSD/92AD2BA3EB1E b/SSD/FORESEE/512/512GB SSD/92AD2BA3EB1E new file mode 100644 index 000000000..6739f8997 --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/92AD2BA3EB1E @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN14546 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 28 10:16:13 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1117 + 12 Power_Cycle_Count -O--C- 100 100 000 - 51 +164 Unknown_Attribute ------ 100 100 000 - 25772228626 +165 Unknown_Attribute ------ 100 100 000 - 37 +166 Unknown_Attribute ------ 100 100 000 - 6 +167 Unknown_Attribute -O---K 100 100 000 - 18 +194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 25/35) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1914 +242 Total_LBAs_Read -O--CK 100 100 000 - 511 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/32 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (207) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x010 4 1117 --- Power-on Hours +0x01 0x018 6 4015886087 --- Logical Sectors Written +0x01 0x020 6 38740611 --- Number of Write Commands +0x01 0x028 6 1073683864 --- Logical Sectors Read +0x01 0x030 6 9944158 --- Number of Read Commands +0x01 0x038 6 996024300476 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/512/512GB SSD/9D22E4FDFC88 b/SSD/FORESEE/512/512GB SSD/9D22E4FDFC88 new file mode 100644 index 000000000..7f497dce3 --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/9D22E4FDFC88 @@ -0,0 +1,176 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 17 09:06:46 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4434 + 12 Power_Cycle_Count -O--C- 100 100 000 - 18 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 92 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 21476016139 +165 Unknown_Attribute ------ 100 100 000 - 18 +166 Unknown_Attribute ------ 100 100 000 - 5 +167 Unknown_Attribute -O---K 100 100 000 - 11 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 8 +194 Temperature_Celsius -O---K 039 039 000 - 39 (Min/Max 16/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 52201 +242 Total_LBAs_Read -O--CK 100 100 000 - 16824 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (22) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 4434 --- Power-on Hours +0x01 0x018 6 3421086440 --- Logical Sectors Written +0x01 0x020 6 38833125 --- Number of Write Commands +0x01 0x028 6 1102599038 --- Logical Sectors Read +0x01 0x030 6 6368665 --- Number of Read Commands +0x01 0x038 6 4087590862008 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/512/512GB SSD/C09DC816E8BB b/SSD/FORESEE/512/512GB SSD/C09DC816E8BB new file mode 100644 index 000000000..9ed29879a --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/C09DC816E8BB @@ -0,0 +1,136 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 11 14:38:21 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 1813 + 12 Power_Cycle_Count PO--CK 100 100 010 - 173 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 1303 +165 Unknown_Attribute PO--CK 100 100 010 - 4 +166 Unknown_Attribute PO--CK 100 100 010 - 2 +167 Unknown_Attribute PO--CK 100 100 010 - 2 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 512 +242 Total_LBAs_Read PO--CK 100 100 010 - 682 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/512/512GB SSD/C356BE6476BD b/SSD/FORESEE/512/512GB SSD/C356BE6476BD new file mode 100644 index 000000000..cacc39240 --- /dev/null +++ b/SSD/FORESEE/512/512GB SSD/C356BE6476BD @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: D910R170 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 4 13:33:31 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 17 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 543 + 12 Power_Cycle_Count -O--C- 100 100 000 - 46 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 261 +163 Unknown_Attribute ------ 100 100 000 - 10 +164 Unknown_Attribute ------ 100 100 000 - 4295360515 +165 Unknown_Attribute ------ 100 100 000 - 6 +166 Unknown_Attribute ------ 100 100 000 - 1 +167 Unknown_Attribute -O---K 100 100 000 - 3 +168 Unknown_Attribute -O--C- 100 100 000 - 3000 +169 Unknown_Attribute PO--C- 100 100 010 - 100 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 034 034 000 - 34 (Min/Max 6/48) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 14517 +242 Total_LBAs_Read -O--CK 100 100 000 - 6298 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (48) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 543 --- Power-on Hours +0x01 0x018 6 951424761 --- Logical Sectors Written +0x01 0x020 6 8786311 --- Number of Write Commands +0x01 0x028 6 412760588 --- Logical Sectors Read +0x01 0x030 6 3607719 --- Number of Read Commands +0x01 0x038 6 500169226236 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FORESEE/64/64GB SSD/03162E1E378D b/SSD/FORESEE/64/64GB SSD/03162E1E378D new file mode 100644 index 000000000..7f16b9a06 --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/03162E1E378D @@ -0,0 +1,123 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.6.D +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 16 18:06:23 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 15778 + 12 Power_Cycle_Count PO--CK 100 100 010 - 21 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 216853 +165 Unknown_Attribute PO--CK 100 100 010 - 468 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 461 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 16073 +242 Total_LBAs_Read PO--CK 100 100 010 - 49 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/64/64GB SSD/093636505929 b/SSD/FORESEE/64/64GB SSD/093636505929 new file mode 100644 index 000000000..347413c21 --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/093636505929 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 6 16:45:12 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 1572 + 12 Power_Cycle_Count PO--CK 100 100 010 - 37 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 99886 +165 Unknown_Attribute PO--CK 100 100 010 - 209 +166 Unknown_Attribute PO--CK 100 100 010 - 128 +167 Unknown_Attribute PO--CK 100 100 010 - 184 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 6123 +242 Total_LBAs_Read PO--CK 100 100 010 - 4039 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/64/64GB SSD/2D4662AA7CA1 b/SSD/FORESEE/64/64GB SSD/2D4662AA7CA1 new file mode 100644 index 000000000..ecf3bed16 --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/2D4662AA7CA1 @@ -0,0 +1,124 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.6.D +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 16 10:16:03 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 20753 + 12 Power_Cycle_Count PO--CK 100 100 010 - 212 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 5318658 +165 Unknown_Attribute PO--CK 100 100 010 - 13575 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 13499 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 195769 +242 Total_LBAs_Read PO--CK 100 100 010 - 1251 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/64/64GB SSD/51A3FD9F22F7 b/SSD/FORESEE/64/64GB SSD/51A3FD9F22F7 new file mode 100644 index 000000000..971cce06a --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/51A3FD9F22F7 @@ -0,0 +1,125 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.20.0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Mar 26 12:22:54 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 623 + 12 Power_Cycle_Count PO--CK 100 100 010 - 88 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 3915 +165 Unknown_Attribute PO--CK 100 100 010 - 4 +166 Unknown_Attribute PO--CK 100 100 010 - 1 +167 Unknown_Attribute PO--CK 100 100 010 - 2 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 45 +242 Total_LBAs_Read PO--CK 100 100 010 - 5 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/64/64GB SSD/8EA255C849EF b/SSD/FORESEE/64/64GB SSD/8EA255C849EF new file mode 100644 index 000000000..55f7929fa --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/8EA255C849EF @@ -0,0 +1,123 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.6 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 25 00:00:31 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 36124 + 12 Power_Cycle_Count PO--CK 100 100 010 - 99 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 296968 +165 Unknown_Attribute PO--CK 100 100 010 - 658 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 614 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 16732 +242 Total_LBAs_Read PO--CK 100 100 010 - 215 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/64/64GB SSD/921813650282 b/SSD/FORESEE/64/64GB SSD/921813650282 new file mode 100644 index 000000000..56600df31 --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/921813650282 @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 14 13:05:15 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 924 + 12 Power_Cycle_Count PO--CK 100 100 010 - 28 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 10071 +165 Unknown_Attribute PO--CK 100 100 010 - 20 +166 Unknown_Attribute PO--CK 100 100 010 - 15 +167 Unknown_Attribute PO--CK 100 100 010 - 19 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 320 +242 Total_LBAs_Read PO--CK 100 100 010 - 13 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/FORESEE/64/64GB SSD/C9C5A949578F b/SSD/FORESEE/64/64GB SSD/C9C5A949578F new file mode 100644 index 000000000..85d09bb55 --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/C9C5A949578F @@ -0,0 +1,125 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V3.15 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Feb 28 20:28:30 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 77 + 12 Power_Cycle_Count PO--CK 100 100 010 - 27 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 922 +165 Unknown_Attribute PO--CK 100 100 010 - 2 +166 Unknown_Attribute PO--CK 100 100 010 - 1 +167 Unknown_Attribute PO--CK 100 100 010 - 1 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 44 +242 Total_LBAs_Read PO--CK 100 100 010 - 7 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/FUCUN/FCS/FCS 480GB/F2B10B23F12E b/SSD/FUCUN/FCS/FCS 480GB/F2B10B23F12E new file mode 100644 index 000000000..9bf446bc2 --- /dev/null +++ b/SSD/FUCUN/FCS/FCS 480GB/F2B10B23F12E @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FCS-480GB +Serial Number: -- +Firmware Version: X0806A0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Nov 6 10:29:19 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 1 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 3 + 9 Power_On_Hours -O--CK 100 100 050 - 2084 + 12 Power_Cycle_Count -O--CK 100 100 050 - 74 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 92 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 4905 +165 Unknown_Attribute -O--CK 100 100 050 - 21 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 9 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 3 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 39 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 3 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 92 +241 Total_LBAs_Written ----CK 100 100 050 - 59751 +242 Total_LBAs_Read ----CK 100 100 050 - 7784 +245 Unknown_Attribute -O--CK 100 100 050 - 83041 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5 - +# 2 Short offline Self-test routine in progress 50% 5 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 17/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 2084 --- Power-on Hours +0x01 0x018 6 3915875106 --- Logical Sectors Written +0x01 0x020 6 31024134 --- Number of Write Commands +0x01 0x028 6 510169889 --- Logical Sectors Read +0x01 0x030 6 4783017 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Fanxiang/S100/S100 128GB/67D8D5315FC5 b/SSD/Fanxiang/S100/S100 128GB/67D8D5315FC5 new file mode 100644 index 000000000..9cf86ecc0 --- /dev/null +++ b/SSD/Fanxiang/S100/S100 128GB/67D8D5315FC5 @@ -0,0 +1,183 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S100 128GB +Serial Number: -- +LU WWN Device Id: 5 0c82d5 ... +Firmware Version: SN17721 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Nov 14 03:08:43 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5288 + 12 Power_Cycle_Count -O--C- 100 100 000 - 15 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65538 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 1129626534524 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 260138 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 531 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius -O---K 037 037 000 - 37 (Min/Max 29/45) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 263 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 765 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 636 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2 +210 Unknown_Attribute -O--CK 200 200 000 - 617 +211 Unknown_Attribute -O--CK 200 200 000 - 308 +231 Unknown_SSD_Attribute PO---K 079 079 005 - 21 +241 Total_LBAs_Written -O--CK 100 100 000 - 77286 +242 Total_LBAs_Read -O--CK 100 100 000 - 2958 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: ?/42 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (272) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 5288 --- Power-on Hours +0x01 0x018 6 162082375640 --- Logical Sectors Written +0x01 0x020 6 1714146640 --- Number of Write Commands +0x01 0x028 6 6205216445 --- Logical Sectors Read +0x01 0x030 6 112370772 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 51 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Fanxiang/S101/S101 1TB/071EA868614E b/SSD/Fanxiang/S101/S101 1TB/071EA868614E new file mode 100644 index 000000000..60a81f106 --- /dev/null +++ b/SSD/Fanxiang/S101/S101 1TB/071EA868614E @@ -0,0 +1,201 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 1TB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN14546 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 23:17:01 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1815 + 12 Power_Cycle_Count -O--C- 100 100 000 - 969 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 196614 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 100 100 000 - 4297719824 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 402808 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 269 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +194 Temperature_Celsius -O---K 037 037 000 - 37 (Min/Max 29/52) +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--CK 100 000 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 42 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 16 +241 Total_LBAs_Written -O--CK 100 100 000 - 3771 +242 Total_LBAs_Read -O--CK 100 100 000 - 2543 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1532 - +# 2 Short offline Completed without error 00% 886 - +# 3 Short offline Aborted by host 00% 691 - +# 4 Short offline Aborted by host 00% 691 - +# 5 Short offline Interrupted (host reset) 00% 680 - +# 6 Short offline Interrupted (host reset) 00% 610 - +# 7 Extended offline Completed without error 00% 457 - +# 8 Short offline Aborted by host 00% 347 - +# 9 Short offline Aborted by host 00% 313 - +#10 Short offline Completed without error 00% 288 - +#11 Short offline Completed without error 00% 275 - +#12 Short offline Completed without error 00% 269 - +#13 Short offline Completed without error 00% 225 - +#14 Short offline Completed without error 00% 167 - +#15 Short offline Completed without error 00% 68 - +#16 Short offline Aborted by host 00% 68 - +#17 Short offline Completed without error 00% 50 - +#18 Short offline Completed without error 00% 26 - +#19 Short offline Completed without error 00% 19 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/38 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (137) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 969 --- Lifetime Power-On Resets +0x01 0x010 4 1815 --- Power-on Hours +0x01 0x018 6 7908923446 --- Logical Sectors Written +0x01 0x020 6 70474994 --- Number of Write Commands +0x01 0x028 6 5333255393 --- Logical Sectors Read +0x01 0x030 6 53878019 --- Number of Read Commands +0x01 0x038 6 1672974329248 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 64 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Fanxiang/S101/S101 1TB/077780A3CE84 b/SSD/Fanxiang/S101/S101 1TB/077780A3CE84 new file mode 100644 index 000000000..643e7d4c5 --- /dev/null +++ b/SSD/Fanxiang/S101/S101 1TB/077780A3CE84 @@ -0,0 +1,183 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 1TB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN12989 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 3 11:36:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 6397 + 12 Power_Cycle_Count ------+ 100 100 000 - 716 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 65538 +171 Unknown_Attribute ------+ 000 000 000 - 0 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 4296343571 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 271 +187 Reported_Uncorrect ------+ 100 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 258 +194 Temperature_Celsius ------+ 039 039 000 - 39 (Min/Max 31/48) +206 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 21 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 19 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +210 Unknown_Attribute ------+ 200 200 000 - 15 +211 Unknown_Attribute ------+ 200 200 000 - 8 +231 Unknown_SSD_Attribute ------+ 099 099 005 - 1 +241 Total_LBAs_Written ------+ 100 100 000 - 1054 +242 Total_LBAs_Read ------+ 100 100 000 - 420 +245 Unknown_Attribute ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (409) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 716 --- Lifetime Power-On Resets +0x01 0x010 4 6397 --- Power-on Hours +0x01 0x018 6 2210908800 --- Logical Sectors Written +0x01 0x020 6 51043794 --- Number of Write Commands +0x01 0x028 6 880811289 --- Logical Sectors Read +0x01 0x030 6 11850231 --- Number of Read Commands +0x01 0x038 6 5894249551332 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Fanxiang/S101/S101 1TB/379B033B3EA5 b/SSD/Fanxiang/S101/S101 1TB/379B033B3EA5 new file mode 100644 index 000000000..fdab0d988 --- /dev/null +++ b/SSD/Fanxiang/S101/S101 1TB/379B033B3EA5 @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 1TB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 5 13:17:21 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 72 + 12 Power_Cycle_Count -O--CK 100 100 050 - 178 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 18 +164 Unknown_Attribute -O--CK 100 100 050 - 5184 +165 Unknown_Attribute -O--CK 100 100 050 - 6 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 3 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 39 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 30989 +242 Total_LBAs_Read ----CK 100 100 050 - 13247 +245 Unknown_Attribute -O--CK 100 100 050 - 18824 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/53 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 178 --- Lifetime Power-On Resets +0x01 0x010 4 72 --- Power-on Hours +0x01 0x018 6 2030936573 --- Logical Sectors Written +0x01 0x020 6 14651629 --- Number of Write Commands +0x01 0x028 6 868207962 --- Logical Sectors Read +0x01 0x030 6 17622164 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Fanxiang/S101/S101 256GB/6D2E98BDE0B9 b/SSD/Fanxiang/S101/S101 256GB/6D2E98BDE0B9 new file mode 100644 index 000000000..64ecc24ff --- /dev/null +++ b/SSD/Fanxiang/S101/S101 256GB/6D2E98BDE0B9 @@ -0,0 +1,206 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 256GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN18383 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Feb 28 23:24:10 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1828 + 12 Power_Cycle_Count -O--C- 100 100 000 - 286 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 196614 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 30076698770 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 4453367 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 51 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 107 +194 Temperature_Celsius -O---K 027 027 000 - 27 (Min/Max 26/50) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 7 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 182 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 146 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2 +210 Unknown_Attribute -O--CK 200 200 000 - 1422 +211 Unknown_Attribute -O--CK 200 200 000 - 1275 +231 Unknown_SSD_Attribute PO---K 096 096 005 - 4 +241 Total_LBAs_Written -O--CK 100 100 000 - 3056 +242 Total_LBAs_Read -O--CK 100 100 000 - 11613 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1828 - +# 2 Short offline Completed without error 00% 1683 - +# 3 Short offline Completed without error 00% 1658 - +# 4 Short offline Completed without error 00% 1633 - +# 5 Short offline Completed without error 00% 1609 - +# 6 Short offline Completed without error 00% 1584 - +# 7 Extended offline Completed without error 00% 1566 - +# 8 Short offline Completed without error 00% 1560 - +# 9 Short offline Completed without error 00% 1535 - +#10 Short offline Completed without error 00% 1511 - +#11 Short offline Completed without error 00% 1486 - +#12 Short offline Completed without error 00% 1463 - +#13 Short offline Completed without error 00% 1462 - +#14 Short offline Completed without error 00% 1438 - +#15 Short offline Completed without error 00% 1415 - +#16 Extended offline Completed without error 00% 1396 - +#17 Short offline Completed without error 00% 1390 - +#18 Short offline Completed without error 00% 1366 - +#19 Short offline Completed without error 00% 1341 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (130) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 286 --- Lifetime Power-On Resets +0x01 0x010 4 1828 --- Power-on Hours +0x01 0x018 6 6410923544 --- Logical Sectors Written +0x01 0x020 6 82239527 --- Number of Write Commands +0x01 0x028 6 24356060944 --- Logical Sectors Read +0x01 0x030 6 151509877 --- Number of Read Commands +0x01 0x038 6 1672986238248 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Fanxiang/S101/S101 4TB/9A263116D567 b/SSD/Fanxiang/S101/S101 4TB/9A263116D567 new file mode 100644 index 000000000..ae64496f0 --- /dev/null +++ b/SSD/Fanxiang/S101/S101 4TB/9A263116D567 @@ -0,0 +1,107 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 4TB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: N4PA30A8 +User Capacity: 4,096,805,658,624 bytes [4.09 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 27 22:07:42 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 28) minutes. +Extended self-test routine +recommended polling time: ( 56) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 2535 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 15 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 4708 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 944 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 30466 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 1 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 6 +194 Temperature_Celsius 0x0032 100 100 050 Old_age Always - 54 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0032 100 100 050 Old_age Always - 43006 +242 Total_LBAs_Read 0x0032 100 100 050 Old_age Always - 2644 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Fanxiang/S101/S101 500GB/DE86097BD899 b/SSD/Fanxiang/S101/S101 500GB/DE86097BD899 new file mode 100644 index 000000000..8d9fcfc36 --- /dev/null +++ b/SSD/Fanxiang/S101/S101 500GB/DE86097BD899 @@ -0,0 +1,159 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 500GB +Serial Number: -- +Firmware Version: W0419B0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 28 19:55:24 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5258 + 12 Power_Cycle_Count -O--CK 100 100 050 - 23 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 71 +164 Unknown_Attribute -O--CK 100 100 050 - 51083 +165 Unknown_Attribute -O--CK 100 100 050 - 112 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 28 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 15 +194 Temperature_Celsius -O---K 100 100 050 - 26 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 353115 +242 Total_LBAs_Read ----CK 100 100 050 - 6296 +245 Unknown_Attribute -O--CK 100 100 050 - 170381 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 26/26 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 5258 --- Power-on Hours +0x01 0x018 6 1666944963 --- Logical Sectors Written +0x01 0x020 6 252832121 --- Number of Write Commands +0x01 0x028 6 412619291 --- Logical Sectors Read +0x01 0x030 6 7946058 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Fanxiang/S101/S101 512GB/41B1C93A3555 b/SSD/Fanxiang/S101/S101 512GB/41B1C93A3555 new file mode 100644 index 000000000..ce900261e --- /dev/null +++ b/SSD/Fanxiang/S101/S101 512GB/41B1C93A3555 @@ -0,0 +1,169 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 512GB +Serial Number: -- +Firmware Version: W0419B0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 3 11:36:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 716 + 12 Power_Cycle_Count -O--CK 100 100 050 - 850 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 45 +164 Unknown_Attribute -O--CK 100 100 050 - 10611 +165 Unknown_Attribute -O--CK 100 100 050 - 7 +166 Unknown_Attribute -O--CK 100 100 050 - 4 +167 Unknown_Attribute -O--CK 100 100 050 - 5 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 344 +194 Temperature_Celsius -O---K 100 100 050 - 27 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 29946 +242 Total_LBAs_Read ----CK 100 100 050 - 23429 +245 Unknown_Attribute -O--CK 100 100 050 - 4743 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 494 - +# 2 Short offline Completed without error 00% 493 - +# 3 Short offline Completed without error 00% 493 - +# 4 Short offline Completed without error 00% 493 - +# 5 Short offline Completed without error 00% 231 - +# 6 Short offline Completed without error 00% 231 - +# 7 Short offline Completed without error 00% 230 - +# 8 Short offline Completed without error 00% 230 - +# 9 Short offline Completed without error 00% 230 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 27/27 Celsius +Lifetime Min/Max Temperature: 20/43 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 850 --- Lifetime Power-On Resets +0x01 0x010 4 716 --- Power-on Hours +0x01 0x018 6 1962597003 --- Logical Sectors Written +0x01 0x020 6 19096855 --- Number of Write Commands +0x01 0x028 6 1535483014 --- Logical Sectors Read +0x01 0x030 6 16801601 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Fanxiang/S101/S101 512GB/82814E3C7C38 b/SSD/Fanxiang/S101/S101 512GB/82814E3C7C38 new file mode 100644 index 000000000..dab5a2f6f --- /dev/null +++ b/SSD/Fanxiang/S101/S101 512GB/82814E3C7C38 @@ -0,0 +1,185 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101 512GB +Serial Number: -- +LU WWN Device Id: 5 0c82d5 ... +Firmware Version: SN17721 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 3 11:36:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 283 + 12 Power_Cycle_Count -O--C- 100 100 000 - 434 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65538 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 4295491588 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 212159 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 135 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 265 +194 Temperature_Celsius -O---K 037 037 000 - 37 (Min/Max 28/50) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 8 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 4 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 4 +211 Unknown_Attribute -O--CK 200 200 000 - 2 +231 Unknown_SSD_Attribute PO---K 100 100 005 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 383 +242 Total_LBAs_Read -O--CK 100 100 000 - 246 +245 Unknown_Attribute -O--CK 100 100 000 - 262148 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: ?/37 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (338) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 434 --- Lifetime Power-On Resets +0x01 0x010 4 283 --- Power-on Hours +0x01 0x018 6 804236998 --- Logical Sectors Written +0x01 0x020 6 16261456 --- Number of Write Commands +0x01 0x028 6 517886686 --- Logical Sectors Read +0x01 0x030 6 17367821 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Fanxiang/S101/S101Q 256GB/69AF08D61D5E b/SSD/Fanxiang/S101/S101Q 256GB/69AF08D61D5E new file mode 100644 index 000000000..31ff59713 --- /dev/null +++ b/SSD/Fanxiang/S101/S101Q 256GB/69AF08D61D5E @@ -0,0 +1,178 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101Q 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HC2705H3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Dec 16 14:58:11 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 723 + 12 Power_Cycle_Count -O--CK 100 100 050 - 58 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 80 +164 Unknown_Attribute -O--CK 100 100 050 - 95 +165 Unknown_Attribute -O--CK 100 100 050 - 130 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 75 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1492383 +177 Wear_Leveling_Count -O--CK 100 100 050 - 7468485 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 23 +194 Temperature_Celsius -O--CK 100 100 050 - 40 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 27003 +242 Total_LBAs_Read -O--CK 100 100 050 - 1311 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 723 --- Power-on Hours +0x01 0x018 6 1769668608 --- Logical Sectors Written +0x01 0x020 6 18350725 --- Number of Write Commands +0x01 0x028 6 85917696 --- Logical Sectors Read +0x01 0x030 6 2710113 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 73 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 254 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Fanxiang/S101/S101Q 256GB/8B101F8350D1 b/SSD/Fanxiang/S101/S101Q 256GB/8B101F8350D1 new file mode 100644 index 000000000..80d95858d --- /dev/null +++ b/SSD/Fanxiang/S101/S101Q 256GB/8B101F8350D1 @@ -0,0 +1,178 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S101Q 256GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HC2705H3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 11 14:40:21 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2 + 12 Power_Cycle_Count -O--CK 100 100 050 - 7 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 68 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O--CK 100 100 050 - 50 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 116 +242 Total_LBAs_Read -O--CK 100 100 050 - 25 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 7602176 --- Logical Sectors Written +0x01 0x020 6 62250 --- Number of Write Commands +0x01 0x028 6 1638400 --- Logical Sectors Read +0x01 0x030 6 41915 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Fanxiang/S301/S301 256GB/21F388A0A014 b/SSD/Fanxiang/S301/S301 256GB/21F388A0A014 new file mode 100644 index 000000000..3d74bb91f --- /dev/null +++ b/SSD/Fanxiang/S301/S301 256GB/21F388A0A014 @@ -0,0 +1,180 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S301 256GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN14941 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 30 19:40:25 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 10868 + 12 Power_Cycle_Count ------+ 100 100 000 - 251 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 131076 +171 Unknown_Attribute ------+ 000 000 000 - 0 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 214768484557 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 186 +187 Reported_Uncorrect ------+ 100 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 205 +194 Temperature_Celsius ------+ 045 045 000 - 45 (Min/Max 32/54) +206 Unknown_SSD_Attribute ------+ 200 200 000 - 50 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 307 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 205 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 2 +210 Unknown_Attribute ------+ 200 200 000 - 385 +211 Unknown_Attribute ------+ 200 200 000 - 289 +231 Unknown_SSD_Attribute ------+ 087 087 005 - 13 +241 Total_LBAs_Written ------+ 100 100 000 - 22010 +242 Total_LBAs_Read ------+ 100 100 000 - 19901 +245 Unknown_Attribute ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: ?/45 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (291) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 251 --- Lifetime Power-On Resets +0x01 0x010 4 10868 --- Power-on Hours +0x01 0x018 6 46158729186 --- Logical Sectors Written +0x01 0x020 6 773039265 --- Number of Write Commands +0x01 0x028 6 41735702931 --- Logical Sectors Read +0x01 0x030 6 2431157575 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Fanxiang/S301/S301 512GB/52022AA66782 b/SSD/Fanxiang/S301/S301 512GB/52022AA66782 new file mode 100644 index 000000000..1a63e8079 --- /dev/null +++ b/SSD/Fanxiang/S301/S301 512GB/52022AA66782 @@ -0,0 +1,182 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Fanxiang S301 512GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN13195 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 14 15:54:34 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 4519 + 12 Power_Cycle_Count ------+ 100 100 000 - 15 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 196614 +171 Unknown_Attribute ------+ 000 000 000 - 0 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 103089832011 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 57 +187 Reported_Uncorrect ------+ 100 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 13 +194 Temperature_Celsius ------+ 048 048 000 - 48 (Min/Max 33/48) +206 Unknown_SSD_Attribute ------+ 200 200 000 - 24 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 162 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 75 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +210 Unknown_Attribute ------+ 200 200 000 - 2761 +211 Unknown_Attribute ------+ 200 200 000 - 1844 +231 Unknown_SSD_Attribute ------+ 095 095 005 - 5 +241 Total_LBAs_Written ------+ 100 100 000 - 4499 +242 Total_LBAs_Read ------+ 100 100 000 - 5 +245 Unknown_Attribute ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: ?/48 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (107) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 4519 --- Power-on Hours +0x01 0x018 6 9436190092 --- Logical Sectors Written +0x01 0x020 6 463826800 --- Number of Write Commands +0x01 0x028 6 12359663 --- Logical Sectors Read +0x01 0x030 6 180117 --- Number of Read Commands +0x01 0x038 6 4165205938636 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Firebat/FSTE30/FSTE30-256GB/3F09198E9853 b/SSD/Firebat/FSTE30/FSTE30-256GB/3F09198E9853 new file mode 100644 index 000000000..67d4a7001 --- /dev/null +++ b/SSD/Firebat/FSTE30/FSTE30-256GB/3F09198E9853 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Firebat FSTE30-256GB +Serial Number: -- +Firmware Version: W0825A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 12 21:47:20 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 32 + 12 Power_Cycle_Count -O--CK 100 100 050 - 9 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 22 +164 Unknown_Attribute -O--CK 100 100 050 - 1267 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 4 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 3306 +242 Total_LBAs_Read ----CK 100 100 050 - 874 +245 Unknown_Attribute -O--CK 100 100 050 - 1889 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 36/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 32 --- Power-on Hours +0x01 0x018 6 216686626 --- Logical Sectors Written +0x01 0x020 6 2666457 --- Number of Write Commands +0x01 0x028 6 57314221 --- Logical Sectors Read +0x01 0x030 6 695640 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Firebat/FSTE30/FSTE30-512G/2B0E12ED36D7 b/SSD/Firebat/FSTE30/FSTE30-512G/2B0E12ED36D7 new file mode 100644 index 000000000..b5a9759f4 --- /dev/null +++ b/SSD/Firebat/FSTE30/FSTE30-512G/2B0E12ED36D7 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Firebat FSTE30-512G +Serial Number: -- +Firmware Version: Y0107A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 13 14:34:36 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 59 + 12 Power_Cycle_Count -O--CK 100 100 050 - 38 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 18 +164 Unknown_Attribute -O--CK 100 100 050 - 12032 +165 Unknown_Attribute -O--CK 100 100 050 - 13 +166 Unknown_Attribute -O--CK 100 100 050 - 4 +167 Unknown_Attribute -O--CK 100 100 050 - 7 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 27 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 33478 +242 Total_LBAs_Read ----CK 100 100 050 - 1072 +245 Unknown_Attribute -O--CK 100 100 050 - 31657 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 24/45 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x010 4 59 --- Power-on Hours +0x01 0x018 6 2194066702 --- Logical Sectors Written +0x01 0x020 6 4527930 --- Number of Write Commands +0x01 0x028 6 70316925 --- Logical Sectors Read +0x01 0x030 6 797328 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Flexis/SSD/SSD 240GB/D4432FE1718E b/SSD/Flexis/SSD/SSD 240GB/D4432FE1718E new file mode 100644 index 000000000..68068ec1e --- /dev/null +++ b/SSD/Flexis/SSD/SSD 240GB/D4432FE1718E @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-STABLE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Flexis SSD 240GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 5 18:05:23 2025 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 17621 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1316 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 255 255 010 - 128 +173 Unknown_Attribute -O--C- 100 100 000 - 3473481 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 142 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 94 +241 Total_LBAs_Written -O--C- 100 100 000 - 4021 +254 Unknown_SSD_Attribute ------ 100 100 000 - 1539 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1316 --- Lifetime Power-On Resets +0x01 0x010 4 17621 --- Power-on Hours +0x01 0x018 6 8433594626 --- Logical Sectors Written +0x01 0x028 6 3229440913 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Foxline/FLSSD256/FLSSD256X5SE/F45429EF380A b/SSD/Foxline/FLSSD256/FLSSD256X5SE/F45429EF380A new file mode 100644 index 000000000..49155bab1 --- /dev/null +++ b/SSD/Foxline/FLSSD256/FLSSD256X5SE/F45429EF380A @@ -0,0 +1,156 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FOXLINE FLSSD256X5SE +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 26 09:15:19 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 8357 + 12 Power_Cycle_Count -O--C- 100 100 000 - 98 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 000 - 134 +173 Unknown_Attribute -O--C- 100 100 000 - 2490425 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 84 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 98 +241 Total_LBAs_Written -O--C- 100 100 000 - 9165 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7386 - +# 2 Short offline Aborted by host 00% 5734 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 98 --- Lifetime Power-On Resets +0x01 0x010 4 8357 --- Power-on Hours +0x01 0x018 6 19221518802 --- Logical Sectors Written +0x01 0x028 6 16040818247 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 238 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 58 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 59 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FuturePath/M600/M600 SATA 2242 512GB/3FE930271505 b/SSD/FuturePath/M600/M600 SATA 2242 512GB/3FE930271505 new file mode 100644 index 000000000..6a1c39295 --- /dev/null +++ b/SSD/FuturePath/M600/M600 SATA 2242 512GB/3FE930271505 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FuturePath M600 SATA 2242 512GB +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Nov 7 00:21:50 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4922 + 12 Power_Cycle_Count -O--C- 100 100 000 - 48 +161 Unknown_Attribute -O--C- 100 100 000 - 173 +163 Unknown_Attribute PO---- 100 100 050 - 81 +165 Unknown_Attribute ------ 100 100 000 - 1117 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1088 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 30 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 2946 +242 Total_LBAs_Read -O--C- 100 100 000 - 98 +249 Unknown_Attribute -O--C- 100 100 000 - 536876 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x010 4 4922 --- Power-on Hours +0x01 0x018 6 6179290938 --- Logical Sectors Written +0x01 0x028 6 206903185 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 131 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/FuturePath/M600/M600 SATA 2242 512GB/7861C4A6F940 b/SSD/FuturePath/M600/M600 SATA 2242 512GB/7861C4A6F940 new file mode 100644 index 000000000..1e13c6111 --- /dev/null +++ b/SSD/FuturePath/M600/M600 SATA 2242 512GB/7861C4A6F940 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FuturePath M600 SATA 2242 512GB +Serial Number: -- +Firmware Version: HAFEB2.1 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 9 19:23:51 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 700 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +161 Unknown_Attribute -O--C- 100 100 000 - 199 +163 Unknown_Attribute PO---- 100 100 050 - 43 +165 Unknown_Attribute ------ 100 100 000 - 187 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 157 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 8 +194 Temperature_Celsius PO---K 055 055 000 - 45 (Min/Max 33/45) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 3585 +242 Total_LBAs_Read -O--C- 100 100 000 - 49 +249 Unknown_Attribute -O--C- 100 100 000 - 79231 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 700 --- Power-on Hours +0x01 0x018 6 7518897295 --- Logical Sectors Written +0x01 0x028 6 103081807 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 122 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GALAX/T0240/T0240A/B35338C8F0C7 b/SSD/GALAX/T0240/T0240A/B35338C8F0C7 new file mode 100644 index 000000000..01f1b5d10 --- /dev/null +++ b/SSD/GALAX/T0240/T0240A/B35338C8F0C7 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GALAX T0240A +Serial Number: -- +Firmware Version: SBFMP1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 13 19:49:54 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9971 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1539 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 000 - 129 +173 Unknown_Attribute -O--C- 100 100 000 - 4391011 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 73 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 93 +241 Total_LBAs_Written -O--C- 100 100 000 - 10414 +242 Total_LBAs_Read -O--C- 100 100 000 - 9922 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1539 --- Lifetime Power-On Resets +0x01 0x010 4 9971 --- Power-on Hours +0x01 0x018 6 21840112996 --- Logical Sectors Written +0x01 0x028 6 20808570097 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6927 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/128/128GB SSD/831682709A5D b/SSD/GOFATOO/128/128GB SSD/831682709A5D new file mode 100644 index 000000000..7b5db642d --- /dev/null +++ b/SSD/GOFATOO/128/128GB SSD/831682709A5D @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO 128GB SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQBB.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Nov 7 15:54:44 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 118 + 12 Power_Cycle_Count -O--C- 100 100 000 - 35 +161 Unknown_Attribute -O--C- 100 100 000 - 149 +163 Unknown_Attribute PO---- 100 100 050 - 58 +165 Unknown_Attribute ------ 100 100 000 - 6 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 4 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 187 +242 Total_LBAs_Read -O--C- 100 100 000 - 145 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 106 - +# 2 Short offline Completed without error 00% 105 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x010 4 118 --- Power-on Hours +0x01 0x018 6 392805921 --- Logical Sectors Written +0x01 0x028 6 305003939 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/128/128GB SSD/B0CBAFA8017A b/SSD/GOFATOO/128/128GB SSD/B0CBAFA8017A new file mode 100644 index 000000000..066f08599 --- /dev/null +++ b/SSD/GOFATOO/128/128GB SSD/B0CBAFA8017A @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO 128GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN19518 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 8 19:32:32 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 279 + 12 Power_Cycle_Count -O--C- 100 100 000 - 21 +164 Unknown_Attribute ------ 100 100 000 - 21476343823 +165 Unknown_Attribute ------ 100 100 000 - 23 +166 Unknown_Attribute ------ 100 100 000 - 5 +167 Unknown_Attribute -O---K 100 100 000 - 15 +194 Temperature_Celsius -O---K 035 035 000 - 35 (Min/Max 25/36) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 470 +242 Total_LBAs_Read -O--CK 100 100 000 - 21 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (301) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 279 --- Power-on Hours +0x01 0x018 6 986315537 --- Logical Sectors Written +0x01 0x020 6 11259705 --- Number of Write Commands +0x01 0x028 6 45957586 --- Logical Sectors Read +0x01 0x030 6 964037 --- Number of Read Commands +0x01 0x038 6 86243900920 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/256/256GB SSD/7897939A53C3 b/SSD/GOFATOO/256/256GB SSD/7897939A53C3 new file mode 100644 index 000000000..1436bafe6 --- /dev/null +++ b/SSD/GOFATOO/256/256GB SSD/7897939A53C3 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO 256GB SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 26 14:17:35 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7627 + 12 Power_Cycle_Count -O--C- 100 100 000 - 21 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 078 078 010 - 104 +173 Unknown_Attribute -O--C- 100 100 000 - 1572898 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 14 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 +241 Total_LBAs_Written -O--C- 100 100 000 - 1444 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 7627 --- Power-on Hours +0x01 0x018 6 3028679752 --- Logical Sectors Written +0x01 0x028 6 109237941 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/512/512GB SSD/9E5928E0DB6E b/SSD/GOFATOO/512/512GB SSD/9E5928E0DB6E new file mode 100644 index 000000000..60659e2bb --- /dev/null +++ b/SSD/GOFATOO/512/512GB SSD/9E5928E0DB6E @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO 512GB SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN18515 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 02:00:02 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 22 + 12 Power_Cycle_Count -O--C- 100 100 000 - 18 +164 Unknown_Attribute ------ 100 100 000 - 21475229701 +165 Unknown_Attribute ------ 100 100 000 - 6 +166 Unknown_Attribute ------ 100 100 000 - 5 +167 Unknown_Attribute -O---K 100 100 000 - 5 +194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 24/38) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 44 +242 Total_LBAs_Read -O--CK 100 100 000 - 14 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: ?/31 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (361) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 22 --- Power-on Hours +0x01 0x018 6 92275488 --- Logical Sectors Written +0x01 0x020 6 948727 --- Number of Write Commands +0x01 0x028 6 30212458 --- Logical Sectors Read +0x01 0x030 6 1244179 --- Number of Read Commands +0x01 0x038 6 17257116684 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/64/64GB SSD/19A3AB38464D b/SSD/GOFATOO/64/64GB SSD/19A3AB38464D new file mode 100644 index 000000000..028cad133 --- /dev/null +++ b/SSD/GOFATOO/64/64GB SSD/19A3AB38464D @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO 64GB SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 29 09:17:27 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 298 + 12 Power_Cycle_Count -O--C- 100 100 000 - 18 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 080 080 010 - 30 +173 Unknown_Attribute -O--C- 100 100 000 - 65538 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 22 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 298 --- Power-on Hours +0x01 0x018 6 47835340 --- Logical Sectors Written +0x01 0x028 6 15449266 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/SSD/SSD 64GB/199AA4ABE2A9 b/SSD/GOFATOO/SSD/SSD 64GB/199AA4ABE2A9 new file mode 100644 index 000000000..98f04f3fc --- /dev/null +++ b/SSD/GOFATOO/SSD/SSD 64GB/199AA4ABE2A9 @@ -0,0 +1,161 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO SSD +Serial Number: -- +Firmware Version: SBFMP1.5 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 25 17:43:41 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 11079 + 12 Power_Cycle_Count -O--C- 100 100 000 - 196 +161 Unknown_Attribute -O--C- 100 100 000 - 194 +163 Unknown_Attribute PO---- 100 100 050 - 20 +165 Unknown_Attribute ------ 100 100 000 - 163 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 137 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 140 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +195 Hardware_ECC_Recovered PO-R-- 100 100 050 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 3250 +242 Total_LBAs_Read -O--C- 100 100 000 - 34 +249 Unknown_Attribute -O--C- 100 100 000 - 4664 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 196 --- Lifetime Power-On Resets +0x01 0x010 4 11079 --- Power-on Hours +0x01 0x018 6 6816356421 --- Logical Sectors Written +0x01 0x028 6 73387894 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 296 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/GOFATOO/SSD/SSD 64GB/D259A01730FA b/SSD/GOFATOO/SSD/SSD 64GB/D259A01730FA new file mode 100644 index 000000000..28bbc41d1 --- /dev/null +++ b/SSD/GOFATOO/SSD/SSD 64GB/D259A01730FA @@ -0,0 +1,161 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GOFATOO SSD +Serial Number: -- +Firmware Version: SBFMP1.5 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 1 00:11:54 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5202 + 12 Power_Cycle_Count -O--C- 100 100 000 - 129 +161 Unknown_Attribute -O--C- 100 100 000 - 185 +163 Unknown_Attribute PO---- 100 100 050 - 40 +165 Unknown_Attribute ------ 100 100 000 - 226 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 193 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 72 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +195 Hardware_ECC_Recovered PO-R-- 100 100 050 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 4176 +242 Total_LBAs_Read -O--C- 100 100 000 - 128 +249 Unknown_Attribute -O--C- 100 100 000 - 11030 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 129 --- Lifetime Power-On Resets +0x01 0x010 4 5202 --- Power-on Hours +0x01 0x018 6 8759110250 --- Logical Sectors Written +0x01 0x028 6 269755531 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 415 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 19 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Geonix/Gold/Gold 256GB/66E6C8E91E58 b/SSD/Geonix/Gold/Gold 256GB/66E6C8E91E58 new file mode 100644 index 000000000..cacc0154c --- /dev/null +++ b/SSD/Geonix/Gold/Gold 256GB/66E6C8E91E58 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Geonix Gold 256GB +Serial Number: -- +Firmware Version: 666 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Jan 21 13:09:15 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 88 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 238 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 15 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 17320 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 18 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 4 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 6 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 210 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 4 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 13220 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 5448 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 9348 + +SMART Error Log Version: 1 +ATA Error Count: 4 + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b0 d0 01 00 4f c2 00 00 00:00:00.000 SMART READ DATA + b0 d1 01 01 4f c2 00 00 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 da 00 00 4f c2 00 00 00:00:00.000 SMART RETURN STATUS + b0 d5 01 00 4f c2 00 00 00:00:00.000 SMART READ LOG + b0 d5 01 01 4f c2 00 00 00:00:00.000 SMART READ LOG + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Gigabyte/GP-GSTFS3112/GP-GSTFS31120GNTD/7B921D6274B6 b/SSD/Gigabyte/GP-GSTFS3112/GP-GSTFS31120GNTD/7B921D6274B6 new file mode 100644 index 000000000..77d74f25d --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3112/GP-GSTFS31120GNTD/7B921D6274B6 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31120GNTD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 16 01:29:17 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 15807 + 12 Power_Cycle_Count -O--C- 100 100 000 - 169 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/43 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 653 (Average 485) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 64 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 83 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 29956 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 169 --- Lifetime Power-On Resets +0x01 0x010 4 15807 --- Power-on Hours +0x01 0x018 6 62823458172 --- Logical Sectors Written +0x01 0x028 6 5399019735 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 508 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Gigabyte/GP-GSTFS3124/GP-GSTFS31240GNTD/666FCD8A5CB9 b/SSD/Gigabyte/GP-GSTFS3124/GP-GSTFS31240GNTD/666FCD8A5CB9 new file mode 100644 index 000000000..e3d038f53 --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3124/GP-GSTFS31240GNTD/666FCD8A5CB9 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31240GNTD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMJ1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 3 11:59:09 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 47985 + 12 Power_Cycle_Count -O--C- 100 100 000 - 36 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 083 083 010 - 0/87 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1008 (Average 1002) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 14 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 78555 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 36 --- Lifetime Power-On Resets +0x01 0x010 4 47985 --- Power-on Hours +0x01 0x018 6 164743174429 --- Logical Sectors Written +0x01 0x028 6 3490948590 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 41 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 42 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Gigabyte/GP-GSTFS3124/GP-GSTFS31240GNTD/FD8C6CD32D8F b/SSD/Gigabyte/GP-GSTFS3124/GP-GSTFS31240GNTD/FD8C6CD32D8F new file mode 100644 index 000000000..f2261adfd --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3124/GP-GSTFS31240GNTD/FD8C6CD32D8F @@ -0,0 +1,157 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31240GNTD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 18:06:41 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 3199 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2570 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/83 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 49 (Average 25) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 13 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 7371 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2624 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2570 --- Lifetime Power-On Resets +0x01 0x010 4 3199 --- Power-on Hours +0x01 0x018 6 15458242953 --- Logical Sectors Written +0x01 0x028 6 6225263391 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10423 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/1ED37DA6C9DE b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/1ED37DA6C9DE new file mode 100644 index 000000000..2076e5035 --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/1ED37DA6C9DE @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31480GNTD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jun 22 09:14:09 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 12641 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2096 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/262 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 154 (Average 122) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 31 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 1 +231 SSD_Life_Left PO--C- 100 100 000 - 95 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 33116 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2096 --- Lifetime Power-On Resets +0x01 0x010 4 12641 --- Power-on Hours +0x01 0x018 6 69449822721 --- Logical Sectors Written +0x01 0x028 6 67076479397 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6400 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 13 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/C63934F8A446 b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/C63934F8A446 new file mode 100644 index 000000000..ca819f27a --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/C63934F8A446 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31480GNTD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 29 23:46:30 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 17446 + 12 Power_Cycle_Count -O--C- 100 100 000 - 33 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/481 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 93 (Average 57) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 98 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 11074 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 17446 --- Power-on Hours +0x01 0x018 6 23224037433 --- Logical Sectors Written +0x01 0x028 6 1236051777 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 235 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 110 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 111 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/IR-SSDPR-S25/IR-SSDPR-S25A-240/C654FEA0B510 b/SSD/Goodram/IR-SSDPR-S25/IR-SSDPR-S25A-240/C654FEA0B510 new file mode 100644 index 000000000..82f92bdf2 --- /dev/null +++ b/SSD/Goodram/IR-SSDPR-S25/IR-SSDPR-S25A-240/C654FEA0B510 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: IR-SSDPR-S25A-240 +Serial Number: -- +Firmware Version: SBFM91.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 26 16:56:14 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 41053 + 12 Power_Cycle_Count -O--C- 100 100 000 - 630 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/340 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 153 (Average 130) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 603 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 95 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 26541 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 630 --- Lifetime Power-On Resets +0x01 0x010 4 41053 --- Power-on Hours +0x01 0x018 6 55662429734 --- Logical Sectors Written +0x01 0x028 6 4182946887 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/SSD/SSD 120GB/00C5C8DAC3A1 b/SSD/Goodram/SSD/SSD 120GB/00C5C8DAC3A1 new file mode 100644 index 000000000..1cf77e737 --- /dev/null +++ b/SSD/Goodram/SSD/SSD 120GB/00C5C8DAC3A1 @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM71.0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 15:45:51 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 24703 + 12 Power_Cycle_Count -O--C- 100 100 000 - 77 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 094 094 010 - 0/53 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 366 (Average 334) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 68 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 66 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 29556 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 24034 - +# 2 Extended offline Completed without error 00% 24010 - +# 3 Extended offline Completed without error 00% 23986 - +# 4 Extended offline Completed without error 00% 23962 - +# 5 Extended offline Completed without error 00% 23939 - +# 6 Extended offline Completed without error 00% 23915 - +# 7 Extended offline Completed without error 00% 23891 - +# 8 Extended offline Completed without error 00% 23867 - +# 9 Extended offline Completed without error 00% 23844 - +#10 Extended offline Completed without error 00% 23820 - +#11 Extended offline Completed without error 00% 23796 - +#12 Extended offline Completed without error 00% 23772 - +#13 Extended offline Completed without error 00% 23748 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 77 --- Lifetime Power-On Resets +0x01 0x010 4 24703 --- Power-on Hours +0x01 0x018 6 61984259971 --- Logical Sectors Written +0x01 0x028 6 27808570690 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 33 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/SSD/SSD 120GB/BDC17F351A83 b/SSD/Goodram/SSD/SSD 120GB/BDC17F351A83 new file mode 100644 index 000000000..618d35b5f --- /dev/null +++ b/SSD/Goodram/SSD/SSD 120GB/BDC17F351A83 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM21.1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 15:45:51 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 50836 + 12 Power_Cycle_Count -O--C- 100 100 000 - 27 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 088 088 010 - 0/71 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 114 (Average 82) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 24 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 97 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2222 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 50836 --- Power-on Hours +0x01 0x018 6 4661419189 --- Logical Sectors Written +0x01 0x028 6 20637300944 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Goodram/SSD/SSD 120GB/D2AC674743CA b/SSD/Goodram/SSD/SSD 120GB/D2AC674743CA new file mode 100644 index 000000000..8611c0ba6 --- /dev/null +++ b/SSD/Goodram/SSD/SSD 120GB/D2AC674743CA @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +Firmware Version: SAFM12.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 11 15:18:49 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 21875 + 12 Power_Cycle_Count -O--C- 100 100 000 - 3700 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 490 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/50 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 132 (Average 97) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 315 +194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30) +218 CRC_Error_Count PO-R-- 100 100 050 - 245 +231 SSD_Life_Left PO--C- 100 100 000 - 3 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 15375 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 21874 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3700 --- Lifetime Power-On Resets +0x01 0x010 4 21875 --- Power-on Hours +0x01 0x018 6 32244308888 --- Logical Sectors Written +0x01 0x020 6 571219519 --- Number of Write Commands +0x01 0x028 6 35341779939 --- Logical Sectors Read +0x01 0x030 6 445952200 --- Number of Read Commands +0x01 0x038 6 78751053187 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 26 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8319 --- Number of Hardware Resets +0x06 0x018 4 228 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 132 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 24 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/SSD/SSD 480GB/BA4A97D5EB65 b/SSD/Goodram/SSD/SSD 480GB/BA4A97D5EB65 new file mode 100644 index 000000000..545c7e2c3 --- /dev/null +++ b/SSD/Goodram/SSD/SSD 480GB/BA4A97D5EB65 @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +Firmware Version: SAFM01.7 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 16 22:55:02 2025 WET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16519 + 12 Power_Cycle_Count -O--C- 100 100 000 - 4974 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 8343 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/1148 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 157 (Average 94) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 1073 +194 Temperature_Celsius PO---K 098 098 057 - 30 (Min/Max 29/30) +218 CRC_Error_Count PO-R-- 100 100 050 - 4241 +231 SSD_Life_Left PO--C- 100 100 000 - 97 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 28490 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4974 --- Lifetime Power-On Resets +0x01 0x018 6 59749893285 --- Logical Sectors Written +0x01 0x020 6 808109757 --- Number of Write Commands +0x01 0x028 6 64711251936 --- Logical Sectors Read +0x01 0x030 6 828055897 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 3 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 137 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1758407 --- Number of Hardware Resets +0x06 0x018 4 152 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 13 Command failed due to ICRC error +0x0003 2 152 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 4089 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 4089 Device-to-host non-data FIS retries +0x0009 4 60400940 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 25369 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-128/B137497B5CA1 b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-128/B137497B5CA1 new file mode 100644 index 000000000..4d4c1a28b --- /dev/null +++ b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-128/B137497B5CA1 @@ -0,0 +1,156 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: SSDPR-CX400-128 +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 8 23:42:42 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 76 + 12 Power_Cycle_Count -O--C- 100 100 000 - 247 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/69 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 11 (Average 9) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 103 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 920 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 247 --- Lifetime Power-On Resets +0x01 0x010 4 76 --- Power-on Hours +0x01 0x018 6 1931187486 --- Logical Sectors Written +0x01 0x028 6 1433491335 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 915 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/027862B34D6F b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/027862B34D6F new file mode 100644 index 000000000..77a0d626b --- /dev/null +++ b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/027862B34D6F @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 12.4-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSDPR-CX400-256-G2 +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 12:11:33 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 3953 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 000 - 73 +173 Unknown_Attribute -O--C- 100 100 000 - 2490428 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 19 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 98 +241 Total_LBAs_Written -O--C- 100 100 000 - 9596 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 3953 --- Power-on Hours +0x01 0x018 6 20125362977 --- Logical Sectors Written +0x01 0x028 6 2012907803 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 44 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/8066C23E48B3 b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/8066C23E48B3 new file mode 100644 index 000000000..606ee1791 --- /dev/null +++ b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/8066C23E48B3 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSDPR-CX400-256-G2 +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 10 13:37:15 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13327 + 12 Power_Cycle_Count -O--C- 100 100 000 - 19 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 173 +173 Unknown_Attribute -O--C- 100 100 000 - 20316501 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 89 +241 Total_LBAs_Written -O--C- 100 100 000 - 28291 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 13327 --- Power-on Hours +0x01 0x018 6 59332086593 --- Logical Sectors Written +0x01 0x028 6 505078575 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 204 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/EB24305B6FDC b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/EB24305B6FDC new file mode 100644 index 000000000..dcfb982a3 --- /dev/null +++ b/SSD/Goodram/SSDPR-CX400/SSDPR-CX400-256-G2/EB24305B6FDC @@ -0,0 +1,157 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSDPR-CX400-256-G2 +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 10 13:37:15 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13327 + 12 Power_Cycle_Count -O--C- 100 100 000 - 19 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 178 +173 Unknown_Attribute -O--C- 100 100 000 - 19136835 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 90 +241 Total_LBAs_Written -O--C- 100 100 000 - 28291 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 13327 --- Power-on Hours +0x01 0x018 6 59332071716 --- Logical Sectors Written +0x01 0x028 6 517764706 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 204 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Great Wall/M10/M10 128GB/CBB7CA074F54 b/SSD/Great Wall/M10/M10 128GB/CBB7CA074F54 new file mode 100644 index 000000000..572f31d02 --- /dev/null +++ b/SSD/Great Wall/M10/M10 128GB/CBB7CA074F54 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Great Wall M10 128GB +Serial Number: -- +Firmware Version: Y0728B0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Nov 23 06:27:57 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 17 + 12 Power_Cycle_Count -O--CK 100 100 050 - 24 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 150 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 13 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 2398 +242 Total_LBAs_Read ----CK 100 100 050 - 1806 +245 Unknown_Attribute -O--CK 100 100 050 - 612 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 26/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 17 --- Power-on Hours +0x01 0x018 6 157219629 --- Logical Sectors Written +0x01 0x020 6 1974268 --- Number of Write Commands +0x01 0x028 6 118402142 --- Logical Sectors Read +0x01 0x030 6 1683066 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Great Wall/M10/M10 256GB/DE9AD935113D b/SSD/Great Wall/M10/M10 256GB/DE9AD935113D new file mode 100644 index 000000000..0adadb8e1 --- /dev/null +++ b/SSD/Great Wall/M10/M10 256GB/DE9AD935113D @@ -0,0 +1,135 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Great Wall M10 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Add. Product Id: mavlsata +Firmware Version: V4.30.2 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 15 21:52:33 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 209 + 12 Power_Cycle_Count PO--CK 100 100 010 - 23 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 461 +165 Unknown_Attribute PO--CK 100 100 010 - 1 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 0 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 36 +242 Total_LBAs_Read PO--CK 100 100 010 - 15 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/HJDK/SSD/SSD 256GB/87F41B95A4E5 b/SSD/HJDK/SSD/SSD 256GB/87F41B95A4E5 new file mode 100644 index 000000000..962a4b44d --- /dev/null +++ b/SSD/HJDK/SSD/SSD 256GB/87F41B95A4E5 @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HJDK SSD 256GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 13 13:03:37 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 445 + 12 Power_Cycle_Count -O--CK 100 100 050 - 819 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 42048 +165 Unknown_Attribute -O--CK 100 100 050 - 96 +166 Unknown_Attribute -O--CK 100 100 050 - 29 +167 Unknown_Attribute -O--CK 100 100 050 - 85 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 483 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 216641 +242 Total_LBAs_Read ----CK 100 100 050 - 137019 +245 Unknown_Attribute -O--CK 100 100 050 - 179904 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 437 - +# 2 Short offline Completed without error 00% 428 - +# 3 Short offline Completed without error 00% 302 - +# 4 Short offline Completed without error 00% 301 - +# 5 Short offline Completed without error 00% 292 - +# 6 Short offline Completed without error 00% 216 - +# 7 Short offline Completed without error 00% 46 - +# 8 Short offline Completed without error 00% 42 - +# 9 Short offline Completed without error 00% 35 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 819 --- Lifetime Power-On Resets +0x01 0x010 4 445 --- Power-on Hours +0x01 0x018 6 1312899341 --- Logical Sectors Written +0x01 0x020 6 50470385 --- Number of Write Commands +0x01 0x028 6 389753722 --- Logical Sectors Read +0x01 0x030 6 34386568 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HP Phison/PSSBN016/PSSBN016GA27MC0/57EEBDA7FF1A b/SSD/HP Phison/PSSBN016/PSSBN016GA27MC0/57EEBDA7FF1A new file mode 100644 index 000000000..edb7eb2b8 --- /dev/null +++ b/SSD/HP Phison/PSSBN016/PSSBN016GA27MC0/57EEBDA7FF1A @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: PSSBN016GA27MC0 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFH00B8 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 5 14:00:58 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 21 + 9 Power_On_Hours -O--CK 100 100 000 - 4675 + 12 Power_Cycle_Count -O--CK 100 100 000 - 210 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--CK 095 095 005 - 154 +174 Unknown_Attribute -O--CK 100 100 000 - 136 +176 Erase_Fail_Count_Chip -O---K 089 089 000 - 60 +181 Program_Fail_Cnt_Total -O---K 001 001 000 - 350402 +184 End-to-End_Error PO-RCK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius PO---K 057 047 000 - 43 (Min/Max 20/53) +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO---K 094 094 005 - 720990 +241 Total_LBAs_Written -O--CK 100 100 000 - 78462 +242 Total_LBAs_Read -O--CK 100 100 000 - 46970 +243 Unknown_Attribute -O--CK 100 100 000 - 98453 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 487 - +# 2 Short offline Completed without error 00% 487 - +# 3 Short offline Aborted by host 00% 456 - +# 4 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 210 --- Lifetime Power-On Resets +0x01 0x010 4 4675 --- Power-on Hours +0x01 0x018 6 2571052805 --- Logical Sectors Written +0x01 0x028 6 1539114503 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/HP Phison/PSSBN016/PSSBN016GA27MC0/C978C2CD5A98 b/SSD/HP Phison/PSSBN016/PSSBN016GA27MC0/C978C2CD5A98 new file mode 100644 index 000000000..dd3266a1b --- /dev/null +++ b/SSD/HP Phison/PSSBN016/PSSBN016GA27MC0/C978C2CD5A98 @@ -0,0 +1,164 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: PSSBN016GA27MC0 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFH00B8 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 24 11:38:28 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 42 + 9 Power_On_Hours -O--CK 100 100 000 - 13317 + 12 Power_Cycle_Count -O--CK 100 100 000 - 537 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--CK 096 096 005 - 127 +174 Unknown_Attribute -O--CK 100 100 000 - 24 +176 Erase_Fail_Count_Chip -O---K 068 068 000 - 46 +181 Program_Fail_Cnt_Total -O---K 087 087 000 - 22843310 +184 End-to-End_Error PO-RCK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius PO---K 062 048 000 - 38 (Min/Max 20/52) +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO---K 095 095 005 - 2097247 +241 Total_LBAs_Written -O--CK 100 100 000 - 45696 +242 Total_LBAs_Read -O--CK 100 100 000 - 23591 +243 Unknown_Attribute -O--CK 100 100 000 - 96693 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 537 --- Lifetime Power-On Resets +0x01 0x010 4 13317 --- Power-on Hours +0x01 0x018 6 1497378785 --- Logical Sectors Written +0x01 0x028 6 773047874 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/HP Phison/PSSBN016/PSSBN016GA27MC1/D3640DF3E3D1 b/SSD/HP Phison/PSSBN016/PSSBN016GA27MC1/D3640DF3E3D1 new file mode 100644 index 000000000..d4db530e6 --- /dev/null +++ b/SSD/HP Phison/PSSBN016/PSSBN016GA27MC1/D3640DF3E3D1 @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: PSSBN016GA27MC1 +Serial Number: -- +LU WWN Device Id: 5 6479a7 ... +Firmware Version: SBFH01H0 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 9 22:53:12 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 16 + 9 Power_On_Hours -O--CK 100 100 000 - 11669 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 076 076 005 - 736 +174 Unknown_Attribute -O--CK 100 100 000 - 16 +176 Erase_Fail_Count_Chip -O---K 092 092 000 - 62 +181 Program_Fail_Cnt_Total -O---K 004 004 000 - 8941177 +184 End-to-End_Error PO-RCK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 053 051 000 - 47 (Min/Max 20/49) +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO---K 075 075 005 - 524363 +241 Total_LBAs_Written -O--CK 100 100 000 - 507773 +242 Total_LBAs_Read -O--CK 100 100 000 - 8974 +243 Unknown_Attribute -O--CK 100 100 000 - 562358 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4 - +# 2 Short offline Completed without error 00% 4 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 11669 --- Power-on Hours +0x01 0x018 6 16638708391 --- Logical Sectors Written +0x01 0x028 6 294075731 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 158 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 158 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/HP Phison/PSSBN032/PSSBN032GA27MC1/D5213619697F b/SSD/HP Phison/PSSBN032/PSSBN032GA27MC1/D5213619697F new file mode 100644 index 000000000..2e114c94d --- /dev/null +++ b/SSD/HP Phison/PSSBN032/PSSBN032GA27MC1/D5213619697F @@ -0,0 +1,164 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: PSSBN032GA27MC1 +Serial Number: -- +LU WWN Device Id: 5 6479a7 ... +Firmware Version: SBFH01H0 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 7 22:20:24 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 16) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 29 + 9 Power_On_Hours -O--CK 100 100 000 - 40830 + 12 Power_Cycle_Count -O--CK 100 100 000 - 86 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 065 065 005 - 1074 +174 Unknown_Attribute -O--CK 100 100 000 - 34 +176 Erase_Fail_Count_Chip -O---K 091 091 000 - 106 +181 Program_Fail_Cnt_Total -O---K 060 060 000 - 149936666 +184 End-to-End_Error PO-RCK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 044 000 - 36 (Min/Max 21/56) +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO---K 064 064 005 - 589888 +241 Total_LBAs_Written -O--CK 100 100 000 - 1547205 +242 Total_LBAs_Read -O--CK 100 100 000 - 415321 +243 Unknown_Attribute -O--CK 100 100 000 - 1516342 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 00% 23002 - +# 2 Short offline Completed without error 00% 23002 - +# 3 Short offline Completed without error 00% 4 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 86 --- Lifetime Power-On Resets +0x01 0x010 4 40830 --- Power-on Hours +0x01 0x018 6 50698821869 --- Logical Sectors Written +0x01 0x028 6 13609271277 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 35 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 53 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 53 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/HP/SSD S650/SSD S650 240GB/22FA534F8BFB b/SSD/HP/SSD S650/SSD S650 240GB/22FA534F8BFB new file mode 100644 index 000000000..f260e7dab --- /dev/null +++ b/SSD/HP/SSD S650/SSD S650 240GB/22FA534F8BFB @@ -0,0 +1,186 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S650 240GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN17180 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 18 19:27:33 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 932 + 12 Power_Cycle_Count -O--C- 100 100 000 - 98 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 091 091 010 - 40043718 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 8591769611 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 901 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 65307 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 88 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 2 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 28 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 11 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2 +210 Unknown_Attribute -O--CK 200 200 000 - 17 +211 Unknown_Attribute -O--CK 200 200 000 - 10 +231 Unknown_SSD_Attribute PO---K 100 100 005 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 867 +242 Total_LBAs_Read -O--CK 100 100 000 - 415 +245 Unknown_Attribute -O--CK 100 100 000 - 589833 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (61) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 98 --- Lifetime Power-On Resets +0x01 0x010 4 932 --- Power-on Hours +0x01 0x018 6 1818917885 --- Logical Sectors Written +0x01 0x020 6 585590222 --- Number of Write Commands +0x01 0x028 6 871227372 --- Logical Sectors Read +0x01 0x030 6 3353219 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/HP/SSD S700/SSD S700 120GB/2B3B60E51A22 b/SSD/HP/SSD S700/SSD S700 120GB/2B3B60E51A22 new file mode 100644 index 000000000..2b8b9cd8c --- /dev/null +++ b/SSD/HP/SSD S700/SSD S700 120GB/2B3B60E51A22 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S700 120GB +Serial Number: -- +Firmware Version: R0522A1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 16:24:57 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 20557 + 12 Power_Cycle_Count -O--CK 100 100 000 - 154 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 100 100 005 - 5352 +174 Unknown_Attribute -O--CK 100 100 000 - 122 +176 Erase_Fail_Count_Chip -O---K 100 100 000 - 100 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 54 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 148689 +242 Total_LBAs_Read -O--CK 100 100 000 - 20447 +243 Unknown_Attribute -O--CK 100 100 000 - 146256 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 90% 12999 - +# 2 Short offline Completed without error 00% 1 - +# 3 Short offline Self-test routine in progress 40% 1 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 154 --- Lifetime Power-On Resets +0x01 0x010 4 20557 --- Power-on Hours +0x01 0x018 6 2586734836 --- Logical Sectors Written +0x01 0x020 6 375355259 --- Number of Write Commands +0x01 0x028 6 4226794084 --- Logical Sectors Read +0x01 0x030 6 9616711 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 76 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 166 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HP/SSD S700/SSD S700 120GB/49AC2B926687 b/SSD/HP/SSD S700/SSD S700 120GB/49AC2B926687 new file mode 100644 index 000000000..9edc88a1d --- /dev/null +++ b/SSD/HP/SSD S700/SSD S700 120GB/49AC2B926687 @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S700 120GB +Serial Number: -- +Firmware Version: U0514A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Mar 20 01:06:03 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 16761 + 12 Power_Cycle_Count -O--CK 100 100 050 - 41 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 66724 +165 Unknown_Attribute -O--CK 100 100 050 - 323 +166 Unknown_Attribute -O--CK 100 100 050 - 43 +167 Unknown_Attribute -O--CK 100 100 050 - 135 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 24 +194 Temperature_Celsius -O---K 100 100 050 - 49 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 28 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 158578 +242 Total_LBAs_Read ----CK 100 100 050 - 2592 +245 Unknown_Attribute -O--CK 100 100 050 - 75636 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 16761 --- Power-on Hours +0x01 0x018 6 1802692976 --- Logical Sectors Written +0x01 0x020 6 8174688 --- Number of Write Commands +0x01 0x028 6 169872541 --- Logical Sectors Read +0x01 0x030 6 249093 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HP/SSD S700/SSD S700 120GB/77A67011FBBF b/SSD/HP/SSD S700/SSD S700 120GB/77A67011FBBF new file mode 100644 index 000000000..e40472875 --- /dev/null +++ b/SSD/HP/SSD S700/SSD S700 120GB/77A67011FBBF @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-STABLE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S700 120GB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 13 18:54:07 2025 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 264 + 12 Power_Cycle_Count -O--CK 100 100 050 - 191 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 646 +165 Unknown_Attribute -O--CK 100 100 050 - 4 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 3 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 17 +194 Temperature_Celsius -O---K 100 100 050 - 32 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4338 +242 Total_LBAs_Read ----CK 100 100 050 - 11279 +245 Unknown_Attribute -O--CK 100 100 050 - 3204 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 23/50 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 191 --- Lifetime Power-On Resets +0x01 0x010 4 264 --- Power-on Hours +0x01 0x018 6 284342441 --- Logical Sectors Written +0x01 0x020 6 493016 --- Number of Write Commands +0x01 0x028 6 739226381 --- Logical Sectors Read +0x01 0x030 6 71256343 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/HP/SSD S700/SSD S700 120GB/B70105A01042 b/SSD/HP/SSD S700/SSD S700 120GB/B70105A01042 new file mode 100644 index 000000000..bbba1c95c --- /dev/null +++ b/SSD/HP/SSD S700/SSD S700 120GB/B70105A01042 @@ -0,0 +1,145 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S700 120GB +Serial Number: -- +Firmware Version: R0522A1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 16 14:57:28 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2458 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 100 100 005 - 28 +174 Unknown_Attribute -O--CK 100 100 000 - 22 +176 Erase_Fail_Count_Chip -O---K 100 100 000 - 100 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 45 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 957 +242 Total_LBAs_Read -O--CK 100 100 000 - 24 +243 Unknown_Attribute -O--CK 100 100 000 - 604 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 2458 --- Power-on Hours +0x01 0x018 6 2008382369 --- Logical Sectors Written +0x01 0x020 6 47656 --- Number of Write Commands +0x01 0x028 6 51467174 --- Logical Sectors Read +0x01 0x030 6 94676 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HP/SSD S700/SSD S700 250GB/2A486DF87848 b/SSD/HP/SSD S700/SSD S700 250GB/2A486DF87848 new file mode 100644 index 000000000..eca048226 --- /dev/null +++ b/SSD/HP/SSD S700/SSD S700 250GB/2A486DF87848 @@ -0,0 +1,145 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S700 250GB +Serial Number: -- +Firmware Version: S0704A1 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Feb 13 16:56:06 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27842 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2000 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 100 100 005 - 161 +174 Unknown_Attribute -O--CK 100 100 000 - 162 +176 Erase_Fail_Count_Chip -O---K 100 100 000 - 100 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 47 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 8165 +242 Total_LBAs_Read -O--CK 100 100 000 - 8502 +243 Unknown_Attribute -O--CK 100 100 000 - 9339 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2000 --- Lifetime Power-On Resets +0x01 0x010 4 27842 --- Power-on Hours +0x01 0x018 6 4238776870 --- Logical Sectors Written +0x01 0x020 6 100184 --- Number of Write Commands +0x01 0x028 6 651999773 --- Logical Sectors Read +0x01 0x030 6 74059 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 64 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HP/SSD S750/SSD S750 512GB/9484600C3E13 b/SSD/HP/SSD S750/SSD S750 512GB/9484600C3E13 new file mode 100644 index 000000000..7386bb170 --- /dev/null +++ b/SSD/HP/SSD S750/SSD S750 512GB/9484600C3E13 @@ -0,0 +1,185 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S750 512GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN10033 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 20 16:17:14 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7339 + 12 Power_Cycle_Count -O--C- 100 100 000 - 61 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 219057225840 +174 Unknown_Attribute -O---K 100 100 000 - 0 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 1036 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius -O---K 045 045 000 - 45 (Min/Max 34/51) +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 51 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 212 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 112 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 5279 +211 Unknown_Attribute -O--CK 200 200 000 - 3820 +231 Unknown_SSD_Attribute PO---K 093 093 005 - 7 +241 Total_LBAs_Written -O--CK 100 100 000 - 7080 +242 Total_LBAs_Read -O--CK 100 100 000 - 1158 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: ?/48 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (395) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 61 --- Lifetime Power-On Resets +0x01 0x010 4 7339 --- Power-on Hours +0x01 0x018 6 14848764539 --- Logical Sectors Written +0x01 0x020 6 467283259 --- Number of Write Commands +0x01 0x028 6 2430375689 --- Logical Sectors Read +0x01 0x030 6 77306328 --- Number of Read Commands +0x01 0x038 6 6760927628428 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 28 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/HP/SSD S750/SSD S750 512GB/A52F2B40E510 b/SSD/HP/SSD S750/SSD S750 512GB/A52F2B40E510 new file mode 100644 index 000000000..bee0ffe29 --- /dev/null +++ b/SSD/HP/SSD S750/SSD S750 512GB/A52F2B40E510 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HP SSD S750 512GB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 20 16:17:14 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 7620 + 12 Power_Cycle_Count -O--CK 100 100 050 - 60 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 31987 +165 Unknown_Attribute -O--CK 100 100 050 - 78 +166 Unknown_Attribute -O--CK 100 100 050 - 30 +167 Unknown_Attribute -O--CK 100 100 050 - 62 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 20 +194 Temperature_Celsius -O---K 100 100 050 - 24 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 226576 +242 Total_LBAs_Read ----CK 100 100 050 - 38750 +245 Unknown_Attribute -O--CK 100 100 050 - 983268 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 24/24 Celsius +Lifetime Min/Max Temperature: 22/35 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 60 --- Lifetime Power-On Resets +0x01 0x010 4 7620 --- Power-on Hours +0x01 0x018 6 1964036376 --- Logical Sectors Written +0x01 0x020 6 478173198 --- Number of Write Commands +0x01 0x028 6 2539551475 --- Logical Sectors Read +0x01 0x030 6 80335234 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/HP/VK0002/VK000240GWSRQ/9E64950680C4 b/SSD/HP/VK0002/VK000240GWSRQ/9E64950680C4 new file mode 100644 index 000000000..1f2894c7b --- /dev/null +++ b/SSD/HP/VK0002/VK000240GWSRQ/9E64950680C4 @@ -0,0 +1,190 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 12.4-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK000240GWSRQ +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: HPG0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 12:11:33 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 25) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 002 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 47665 +173 Unknown_Attribute PO--CK 095 095 005 - 322 +175 Program_Fail_Count_Chip PO--CK 100 100 001 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 200 200 097 - 0 +194 Temperature_Celsius -O---K 081 073 000 - 19 +196 Reallocated_Event_Count PO--CK 100 100 005 - 0 +202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 1 Pending Defects log +0x0d GPL R/O 1 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80 GPL R/W 16 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb5 SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xbb GPL VS 1 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xd7 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 19 Celsius +Power Cycle Min/Max Temperature: 19/27 Celsius +Lifetime Min/Max Temperature: 7/29 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 37 --- Lifetime Power-On Resets +0x01 0x010 4 47665 --- Power-on Hours +0x01 0x018 6 125785749995 --- Logical Sectors Written +0x01 0x020 6 1224552954 --- Number of Write Commands +0x01 0x028 6 66507354150 --- Logical Sectors Read +0x01 0x030 6 134817602 --- Number of Read Commands +0x01 0x038 6 1237000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 19 --- Current Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 7 --- Lowest Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 234 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/HP/VK0002/VK000240GWSRQ/E0B5FB71AB01 b/SSD/HP/VK0002/VK000240GWSRQ/E0B5FB71AB01 new file mode 100644 index 000000000..c6a4d0eae --- /dev/null +++ b/SSD/HP/VK0002/VK000240GWSRQ/E0B5FB71AB01 @@ -0,0 +1,190 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 12.4-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK000240GWSRQ +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: HPG0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 12:11:33 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 25) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 002 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 48040 +173 Unknown_Attribute PO--CK 095 095 005 - 328 +175 Program_Fail_Count_Chip PO--CK 100 100 001 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 200 200 097 - 0 +194 Temperature_Celsius -O---K 076 072 000 - 24 +196 Reallocated_Event_Count PO--CK 100 100 005 - 0 +202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 1 Pending Defects log +0x0d GPL R/O 1 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80 GPL R/W 16 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb5 SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xbb GPL VS 1 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xd7 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 24/27 Celsius +Lifetime Min/Max Temperature: 6/29 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 42 --- Lifetime Power-On Resets +0x01 0x010 4 48040 --- Power-on Hours +0x01 0x018 6 128361272902 --- Logical Sectors Written +0x01 0x020 6 1260184973 --- Number of Write Commands +0x01 0x028 6 68180999033 --- Logical Sectors Read +0x01 0x030 6 144555641 --- Number of Read Commands +0x01 0x038 6 2339000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 6 --- Lowest Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 253 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/HP/VK0009/VK000960GWTHB/A5B0AF78B076 b/SSD/HP/VK0009/VK000960GWTHB/A5B0AF78B076 new file mode 100644 index 000000000..335c3ef28 --- /dev/null +++ b/SSD/HP/VK0009/VK000960GWTHB/A5B0AF78B076 @@ -0,0 +1,196 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK000960GWTHB +Serial Number: -- +LU WWN Device Id: 5 ace42e ... +Firmware Version: HPG4 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 4 17:35:41 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 006 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2 + 9 Power_On_Hours -O--CK 087 087 000 - 11876 + 11 Unknown_SSD_Attribute -O--C- 100 100 000 - 159 + 12 Power_Cycle_Count -O--CK 100 100 020 - 162 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 099 099 001 - 5816304 +174 Unknown_Attribute -O--CK 100 100 000 - 159 +175 Program_Fail_Count_Chip PO--CK 100 100 050 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 100 100 006 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 2 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 2 +194 Temperature_Celsius -O---K 071 063 000 - 29 (Min/Max 17/37) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0 +196 Reallocated_Event_Count PO--CK 100 100 036 - 2 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 16 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Unknown_SSD_Attribute -OSR-- 100 001 000 - 0 +204 Soft_ECC_Correction -OSR-- 100 001 000 - 0 +231 Unknown_SSD_Attribute PO--CK 099 099 001 - 99 +234 Unknown_Attribute -O--CK 100 100 000 - 77610 +241 Total_LBAs_Written -O--CK 100 100 000 - 73063 +242 Total_LBAs_Read -O--CK 100 100 000 - 62349 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 4748715 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 1 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL R/W 16 Host vendor specific log +0xb5 SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xbb GPL VS 1 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xd7 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 21/32 Celsius +Lifetime Min/Max Temperature: 17/37 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -20/125 Celsius +Temperature History Size (Index): 478 (228) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 162 --- Lifetime Power-On Resets +0x01 0x010 4 11876 --- Power-on Hours +0x01 0x018 6 153226243026 --- Logical Sectors Written +0x01 0x020 6 877671001 --- Number of Write Commands +0x01 0x028 6 130756538679 --- Logical Sectors Read +0x01 0x030 6 799200919 --- Number of Read Commands +0x01 0x038 6 1751650709380 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 34067 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/HP/VK0009/VK000960GWTHB/C2FC3E94E3BE b/SSD/HP/VK0009/VK000960GWTHB/C2FC3E94E3BE new file mode 100644 index 000000000..decdf25aa --- /dev/null +++ b/SSD/HP/VK0009/VK000960GWTHB/C2FC3E94E3BE @@ -0,0 +1,198 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK000960GWTHB +Serial Number: -- +LU WWN Device Id: 5 ace42e ... +Firmware Version: HPG4 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 4 17:35:41 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 006 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 9 Power_On_Hours -O--CK 062 062 000 - 34238 + 11 Unknown_SSD_Attribute -O--C- 100 100 000 - 144 + 12 Power_Cycle_Count -O--CK 100 100 020 - 149 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 096 096 001 - 18810432 +174 Unknown_Attribute -O--CK 100 100 000 - 144 +175 Program_Fail_Count_Chip PO--CK 100 100 050 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 100 100 006 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 10 +194 Temperature_Celsius -O---K 071 061 000 - 29 (Min/Max 17/39) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0 +196 Reallocated_Event_Count PO--CK 100 100 036 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0 +204 Soft_ECC_Correction -OSR-- 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--CK 096 096 001 - 96 +234 Unknown_Attribute -O--CK 100 100 000 - 248821 +241 Total_LBAs_Written -O--CK 100 100 000 - 239052 +242 Total_LBAs_Read -O--CK 100 100 000 - 159532 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 8010972 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 1 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL R/W 16 Host vendor specific log +0xb5 SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xbb GPL VS 1 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xd7 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 21/33 Celsius +Lifetime Min/Max Temperature: 17/39 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -20/125 Celsius +Temperature History Size (Index): 478 (233) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 149 --- Lifetime Power-On Resets +0x01 0x010 4 34238 --- Power-on Hours +0x01 0x018 6 501330421998 --- Logical Sectors Written +0x01 0x020 6 6257222186 --- Number of Write Commands +0x01 0x028 6 334563899934 --- Logical Sectors Read +0x01 0x030 6 3575026329 --- Number of Read Commands +0x01 0x038 6 1751650709460 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 52488 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0240/VK0240GEYJQ/1956F43B2E8B b/SSD/HP/VK0240/VK0240GEYJQ/1956F43B2E8B new file mode 100644 index 000000000..5727fcee6 --- /dev/null +++ b/SSD/HP/VK0240/VK0240GEYJQ/1956F43B2E8B @@ -0,0 +1,201 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0240GEYJQ +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG2 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 24 18:00:46 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 59) minutes. +Conveyance self-test routine +recommended polling time: ( 59) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 1195657 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46322 +173 Unknown_Attribute PO--CK 095 095 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1168694579334 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 110 039 - 21391473 +194 Temperature_Celsius -O---K 100 100 000 - 26 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xd7 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/27 Celsius +Lifetime Min/Max Temperature: 16/37 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (354) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x018 6 39188529581 --- Logical Sectors Written +0x01 0x020 6 337154386 --- Number of Write Commands +0x01 0x028 6 58472453358 --- Logical Sectors Read +0x01 0x030 6 211919721 --- Number of Read Commands +0x01 0x038 6 3553176552 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 28 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 228 --- Number of Hardware Resets +0x06 0x010 4 185 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0240/VK0240GEYJQ/D85C11D185F3 b/SSD/HP/VK0240/VK0240GEYJQ/D85C11D185F3 new file mode 100644 index 000000000..12f6a5fd1 --- /dev/null +++ b/SSD/HP/VK0240/VK0240GEYJQ/D85C11D185F3 @@ -0,0 +1,199 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0240GEYJQ +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG2 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 24 18:00:46 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 59) minutes. +Conveyance self-test routine +recommended polling time: ( 59) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 1172528 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46323 +173 Unknown_Attribute PO--CK 095 095 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1168694579374 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 21368336 +194 Temperature_Celsius -O---K 100 100 000 - 26 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xd7 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 23/26 Celsius +Lifetime Min/Max Temperature: 16/38 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (372) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x018 6 39188528063 --- Logical Sectors Written +0x01 0x020 6 338111636 --- Number of Write Commands +0x01 0x028 6 58501967112 --- Logical Sectors Read +0x01 0x030 6 211725372 --- Number of Read Commands +0x01 0x038 6 3554114398 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 28 --- Highest Average Short Term Temperature +0x05 0x038 1 17 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 232 --- Number of Hardware Resets +0x06 0x010 4 189 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/HP/VK0480/VK0480GEYJR/027BE0F6D519 b/SSD/HP/VK0480/VK0480GEYJR/027BE0F6D519 new file mode 100644 index 000000000..169ced065 --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/027BE0F6D519 @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 47446 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 49423 +173 Unknown_Attribute PO--CK 041 041 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1206886012434 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 77774 +194 Temperature_Celsius -O---K 100 100 000 - 27 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 26/27 Celsius +Lifetime Min/Max Temperature: 11/57 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (266) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x018 6 1238183638122 --- Logical Sectors Written +0x01 0x020 6 2920334804 --- Number of Write Commands +0x01 0x028 6 140826817895 --- Logical Sectors Read +0x01 0x030 6 281474976710655 --- Number of Read Commands +0x01 0x038 6 1832672956 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6579200 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 839452220 --- Number of Hardware Resets +0x06 0x010 4 270 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 59 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/08B78A3C3473 b/SSD/HP/VK0480/VK0480GEYJR/08B78A3C3473 new file mode 100644 index 000000000..824c9e4f1 --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/08B78A3C3473 @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 57197 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 53214 +173 Unknown_Attribute PO--CK 095 095 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1309965292974 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 87341 +194 Temperature_Celsius -O---K 100 100 000 - 26 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 26/26 Celsius +Lifetime Min/Max Temperature: 14/40 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (218) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x018 6 86422102078 --- Logical Sectors Written +0x01 0x020 6 4582087240 --- Number of Write Commands +0x01 0x028 6 16578803858 --- Logical Sectors Read +0x01 0x030 6 702623832 --- Number of Read Commands +0x01 0x038 6 2592812327 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 20 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 910 --- Number of Hardware Resets +0x06 0x010 4 635 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/30D2266E3D75 b/SSD/HP/VK0480/VK0480GEYJR/30D2266E3D75 new file mode 100644 index 000000000..de5367189 --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/30D2266E3D75 @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 45589 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 53204 +173 Unknown_Attribute PO--CK 095 095 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1305670260822 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 75837 +194 Temperature_Celsius -O---K 100 100 000 - 26 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 26/26 Celsius +Lifetime Min/Max Temperature: 14/44 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (82) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x018 6 129281236996 --- Logical Sectors Written +0x01 0x020 6 1217746937 --- Number of Write Commands +0x01 0x028 6 52402757341 --- Logical Sectors Read +0x01 0x030 6 1367372573 --- Number of Read Commands +0x01 0x038 6 2558083114 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 19 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 28 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 468 --- Number of Hardware Resets +0x06 0x010 4 371 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/80FF910FC5A8 b/SSD/HP/VK0480/VK0480GEYJR/80FF910FC5A8 new file mode 100644 index 000000000..943d976c5 --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/80FF910FC5A8 @@ -0,0 +1,352 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 41973 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 50952 +173 Unknown_Attribute PO--CK 090 090 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1202591045198 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 72301 +194 Temperature_Celsius -O---K 100 100 000 - 26 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 15 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 15 [14] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 e0 00 00 00 00 00 20 40 00 Error: ICRC, ABRT at LBA = 0x00000020 = 32 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 e0 00 00 00 00 00 20 40 00 00:06:21.783 WRITE FPDMA QUEUED + 60 00 00 00 e0 00 00 00 00 00 20 40 00 00:06:21.782 READ FPDMA QUEUED + 60 00 00 00 e0 00 00 37 e4 34 20 40 00 00:06:21.782 READ FPDMA QUEUED + 60 00 00 00 e0 00 00 37 e4 32 20 40 00 00:06:21.782 READ FPDMA QUEUED + 60 00 00 00 e0 00 00 00 00 02 20 40 00 00:06:21.782 READ FPDMA QUEUED + +Error 14 [13] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 00 00 02 10 40 00 Error: ICRC, ABRT at LBA = 0x00000210 = 528 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 00 00 02 10 40 00 00:06:21.687 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 37 e4 34 10 40 00 00:06:21.687 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 37 e4 32 10 40 00 00:06:21.668 WRITE FPDMA QUEUED + 60 00 00 00 10 00 00 37 e4 34 10 40 00 00:06:21.668 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 00 02 10 40 00 00:06:21.668 READ FPDMA QUEUED + +Error 13 [12] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 01 00 00 00 37 e4 35 00 40 00 Error: ICRC, ABRT at LBA = 0x37e43500 = 937702656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 37 e4 35 00 40 00 00:06:00.544 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 08 00:06:00.544 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 40 08 00:06:00.544 SET FEATURES [Enable read look-ahead] + c6 00 00 00 01 00 00 00 00 00 00 40 08 00:06:00.544 SET MULTIPLE MODE + ef 00 03 00 45 00 00 00 00 00 00 40 08 00:06:00.544 SET FEATURES [Set transfer mode] + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 12 [11] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 37 e4 34 10 40 00 Error: ICRC, ABRT at LBA = 0x37e43410 = 937702416 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 10 00 00 37 e4 34 10 40 00 00:06:00.451 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 00 02 10 40 00 00:06:00.451 READ FPDMA QUEUED + 60 00 00 00 10 00 00 37 e4 32 10 40 00 00:06:00.451 READ FPDMA QUEUED + 61 00 00 01 00 00 00 37 e4 35 00 40 00 00:06:00.451 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 08 00:06:00.450 SET FEATURES [Enable write cache] + +Error 11 [10] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 01 00 00 00 37 e4 35 00 40 00 Error: ICRC, ABRT at LBA = 0x37e43500 = 937702656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 37 e4 35 00 40 00 00:06:00.249 WRITE FPDMA QUEUED + 60 00 00 00 10 00 00 37 e4 34 10 40 00 00:06:00.249 READ FPDMA QUEUED + 60 00 00 00 10 00 00 37 e4 32 10 40 00 00:06:00.249 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 00 02 10 40 00 00:06:00.249 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 08 00:06:00.249 SET FEATURES [Enable write cache] + +Error 10 [9] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 e0 00 00 00 00 00 20 40 00 Error: ICRC, ABRT at LBA = 0x00000020 = 32 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 e0 00 00 00 00 00 20 40 00 00:05:59.656 WRITE FPDMA QUEUED + 60 00 00 00 e0 00 00 37 e4 34 20 40 00 00:05:59.655 READ FPDMA QUEUED + 60 00 00 00 e0 00 00 00 00 00 20 40 00 00:05:59.655 READ FPDMA QUEUED + 60 00 00 00 e0 00 00 37 e4 32 20 40 00 00:05:59.655 READ FPDMA QUEUED + 60 00 00 00 e0 00 00 00 00 02 20 40 00 00:05:59.655 READ FPDMA QUEUED + +Error 9 [8] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 37 e4 34 10 40 00 Error: ICRC, ABRT at LBA = 0x37e43410 = 937702416 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 37 e4 34 10 40 00 00:05:59.555 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 08 00:05:59.555 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 40 08 00:05:59.555 SET FEATURES [Enable read look-ahead] + c6 00 00 00 01 00 00 00 00 00 00 40 08 00:05:59.554 SET MULTIPLE MODE + ef 00 03 00 45 00 00 00 00 00 00 40 08 00:05:59.554 SET FEATURES [Set transfer mode] + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 8 [7] occurred at disk power-on lifetime: 50951 hours (2122 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 37 e4 34 10 40 00 Error: ICRC, ABRT at LBA = 0x37e43410 = 937702416 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 37 e4 34 10 40 00 00:05:59.478 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 08 00:05:59.478 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 40 08 00:05:59.478 SET FEATURES [Enable read look-ahead] + c6 00 00 00 01 00 00 00 00 00 00 40 08 00:05:59.478 SET MULTIPLE MODE + ef 00 03 00 45 00 00 00 00 00 00 40 08 00:05:59.478 SET FEATURES [Set transfer mode] + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 26/26 Celsius +Lifetime Min/Max Temperature: 14/37 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (418) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x018 6 298951623580 --- Logical Sectors Written +0x01 0x020 6 4833778923 --- Number of Write Commands +0x01 0x028 6 27737760440 --- Logical Sectors Read +0x01 0x030 6 157988926 --- Number of Read Commands +0x01 0x038 6 3038578239 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 17 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 541 --- Number of Hardware Resets +0x06 0x010 4 440 --- Number of ASR Events +0x06 0x018 4 162 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/CBEE91D797BB b/SSD/HP/VK0480/VK0480GEYJR/CBEE91D797BB new file mode 100644 index 000000000..706482f6a --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/CBEE91D797BB @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 42189 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 50957 +173 Unknown_Attribute PO--CK 098 098 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1224065947814 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 72453 +194 Temperature_Celsius -O---K 100 100 000 - 27 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 26/27 Celsius +Lifetime Min/Max Temperature: 14/37 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (217) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x018 6 38722484822 --- Logical Sectors Written +0x01 0x020 6 566665534 --- Number of Write Commands +0x01 0x028 6 6356402121 --- Logical Sectors Read +0x01 0x030 6 219495904 --- Number of Read Commands +0x01 0x038 6 3057244212 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 428 --- Number of Hardware Resets +0x06 0x010 4 360 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/CD90427D7114 b/SSD/HP/VK0480/VK0480GEYJR/CD90427D7114 new file mode 100644 index 000000000..056f3cf16 --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/CD90427D7114 @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 42869 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 53200 +173 Unknown_Attribute PO--CK 097 097 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1297080326130 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 73181 +194 Temperature_Celsius -O---K 100 100 000 - 26 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 26/26 Celsius +Lifetime Min/Max Temperature: 14/45 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (290) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x018 6 63660599638 --- Logical Sectors Written +0x01 0x020 6 595153040 --- Number of Write Commands +0x01 0x028 6 12831060797 --- Logical Sectors Read +0x01 0x030 6 227575423 --- Number of Read Commands +0x01 0x038 6 2545004486 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 19 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 17 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 414 --- Number of Hardware Resets +0x06 0x010 4 328 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/CF885D4721AE b/SSD/HP/VK0480/VK0480GEYJR/CF885D4721AE new file mode 100644 index 000000000..e688bc05d --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/CF885D4721AE @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 40285 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 53181 +173 Unknown_Attribute PO--CK 097 097 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1279900522122 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 70525 +194 Temperature_Celsius -O---K 100 100 000 - 27 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 26/27 Celsius +Lifetime Min/Max Temperature: 14/36 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (52) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x018 6 77854408006 --- Logical Sectors Written +0x01 0x020 6 924970418 --- Number of Write Commands +0x01 0x028 6 4411476836 --- Logical Sectors Read +0x01 0x030 6 155832039 --- Number of Read Commands +0x01 0x038 6 2473282688 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 30 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 459 --- Number of Hardware Resets +0x06 0x010 4 375 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/HP/VK0480/VK0480GEYJR/E0544D238CDB b/SSD/HP/VK0480/VK0480GEYJR/E0544D238CDB new file mode 100644 index 000000000..f9125fb7a --- /dev/null +++ b/SSD/HP/VK0480/VK0480GEYJR/E0544D238CDB @@ -0,0 +1,197 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: VK0480GEYJR +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 04:27:18 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 76) minutes. +Conveyance self-test routine +recommended polling time: ( 76) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 40397 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 53184 +173 Unknown_Attribute PO--CK 098 098 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1288490456894 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 70629 +194 Temperature_Celsius -O---K 100 100 000 - 27 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 26/27 Celsius +Lifetime Min/Max Temperature: 14/36 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (194) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x018 6 57641411678 --- Logical Sectors Written +0x01 0x020 6 419143218 --- Number of Write Commands +0x01 0x028 6 1578498091 --- Logical Sectors Read +0x01 0x030 6 33328905 --- Number of Read Commands +0x01 0x038 6 2483878288 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 19 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 552 --- Number of Hardware Resets +0x06 0x010 4 396 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/HPE/MK0200/MK0200GCTYV/4EACA0C799C8 b/SSD/HPE/MK0200/MK0200GCTYV/4EACA0C799C8 new file mode 100644 index 000000000..bea931b31 --- /dev/null +++ b/SSD/HPE/MK0200/MK0200GCTYV/4EACA0C799C8 @@ -0,0 +1,229 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MK0200GCTYV +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 5DV1HPG4 +User Capacity: 200,049,647,616 bytes [200 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 26 22:08:01 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 11) minutes. +Conveyance self-test routine +recommended polling time: ( 11) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 2799320 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 58374 +173 Unknown_Attribute PO--CK 100 100 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 1473261142658 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 304258304 +194 Temperature_Celsius -O---K 100 100 000 - 19 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 51 02 00 00 00 58 00 f3 00 40 00 Error: at LBA = 0x5800f300 = 1476457216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 02 00 00 00 58 00 f3 00 40 00 00:07:48.431 READ FPDMA QUEUED + 60 00 00 02 00 00 00 56 00 f3 00 40 00 00:07:48.430 READ FPDMA QUEUED + 60 00 00 02 00 00 00 54 00 f3 00 40 00 00:07:48.430 READ FPDMA QUEUED + 60 00 00 02 00 00 00 52 00 f3 00 40 00 00:07:48.429 READ FPDMA QUEUED + 60 00 00 02 00 00 00 50 00 f3 00 40 00 00:07:48.428 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 57984 - +# 2 Short offline Completed without error 00% 28 - +# 3 Extended offline Completed without error 00% 28 - +# 4 Short offline Completed without error 00% 3 - +# 5 Extended offline Completed without error 00% 3 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 19 Celsius +Power Cycle Min/Max Temperature: 17/23 Celsius +Lifetime Min/Max Temperature: 12/45 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 0e 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (272) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 63 --- Lifetime Power-On Resets +0x01 0x018 6 15813628284 --- Logical Sectors Written +0x01 0x020 6 219833002 --- Number of Write Commands +0x01 0x028 6 648372190307 --- Logical Sectors Read +0x01 0x030 6 1326179332 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 19 --- Current Temperature +0x05 0x010 1 20 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1478 --- Number of Hardware Resets +0x06 0x010 4 236 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/HUGWORLD/SSD/SSD 256GB/5BF2068809EC b/SSD/HUGWORLD/SSD/SSD 256GB/5BF2068809EC new file mode 100644 index 000000000..de17e2538 --- /dev/null +++ b/SSD/HUGWORLD/SSD/SSD 256GB/5BF2068809EC @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUGWORLD SSD 256GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 19 22:23:11 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10 + 12 Power_Cycle_Count -O--CK 100 100 050 - 48 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 326 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O---K 100 100 050 - 63 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1764 +242 Total_LBAs_Read ----CK 100 100 050 - 1739 +245 Unknown_Attribute -O--CK 100 100 050 - 396 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 63 Celsius +Power Cycle Min/Max Temperature: 63/63 Celsius +Lifetime Min/Max Temperature: 24/75 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x010 4 10 --- Power-on Hours +0x01 0x018 6 115651142 --- Logical Sectors Written +0x01 0x020 6 827071 --- Number of Write Commands +0x01 0x028 6 114010668 --- Logical Sectors Read +0x01 0x030 6 1522523 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HUGWORLD/SSD/SSD 256GB/74F6D3C307D5 b/SSD/HUGWORLD/SSD/SSD 256GB/74F6D3C307D5 new file mode 100644 index 000000000..b775c55cd --- /dev/null +++ b/SSD/HUGWORLD/SSD/SSD 256GB/74F6D3C307D5 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUGWORLD SSD 256GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 4 22:02:22 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5 + 12 Power_Cycle_Count -O--CK 100 100 050 - 26 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 17 +164 Unknown_Attribute -O--CK 100 100 050 - 327 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 16 +194 Temperature_Celsius -O---K 100 100 050 - 67 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1509 +242 Total_LBAs_Read ----CK 100 100 050 - 1544 +245 Unknown_Attribute -O--CK 100 100 050 - 1204 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 67 Celsius +Power Cycle Min/Max Temperature: 67/67 Celsius +Lifetime Min/Max Temperature: 23/75 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 98903938 --- Logical Sectors Written +0x01 0x020 6 710388 --- Number of Write Commands +0x01 0x028 6 101215707 --- Logical Sectors Read +0x01 0x030 6 1446632 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HUGWORLD/SSD/SSD 256GB/90530D367462 b/SSD/HUGWORLD/SSD/SSD 256GB/90530D367462 new file mode 100644 index 000000000..27e71a65d --- /dev/null +++ b/SSD/HUGWORLD/SSD/SSD 256GB/90530D367462 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUGWORLD SSD 256GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 23:08:43 2025 +03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 51 + 12 Power_Cycle_Count -O--CK 100 100 050 - 94 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 2276 +165 Unknown_Attribute -O--CK 100 100 050 - 7 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 4 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 30 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 11209 +242 Total_LBAs_Read ----CK 100 100 050 - 7195 +245 Unknown_Attribute -O--CK 100 100 050 - 2970 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 94 --- Lifetime Power-On Resets +0x01 0x010 4 51 --- Power-on Hours +0x01 0x018 6 734639637 --- Logical Sectors Written +0x01 0x020 6 9610517 --- Number of Write Commands +0x01 0x028 6 471594316 --- Logical Sectors Read +0x01 0x030 6 6040741 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HUGWORLD/SSD/SSD 256GB/C32222EA7100 b/SSD/HUGWORLD/SSD/SSD 256GB/C32222EA7100 new file mode 100644 index 000000000..4d9cec2e9 --- /dev/null +++ b/SSD/HUGWORLD/SSD/SSD 256GB/C32222EA7100 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUGWORLD SSD 256GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 19 10:47:02 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 36 + 12 Power_Cycle_Count -O--CK 100 100 050 - 41 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 1027 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 24 +194 Temperature_Celsius -O---K 100 100 050 - 67 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4658 +242 Total_LBAs_Read ----CK 100 100 050 - 5402 +245 Unknown_Attribute -O--CK 100 100 050 - 2144 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 67 Celsius +Power Cycle Min/Max Temperature: 67/67 Celsius +Lifetime Min/Max Temperature: 28/75 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 36 --- Power-on Hours +0x01 0x018 6 305269210 --- Logical Sectors Written +0x01 0x020 6 2881521 --- Number of Write Commands +0x01 0x028 6 354071971 --- Logical Sectors Read +0x01 0x030 6 2075792 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HUGWORLD/SSD/SSD 512GB/13590D16E3AF b/SSD/HUGWORLD/SSD/SSD 512GB/13590D16E3AF new file mode 100644 index 000000000..09e74c480 --- /dev/null +++ b/SSD/HUGWORLD/SSD/SSD 512GB/13590D16E3AF @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUGWORLD SSD 512GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 17:29:06 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2552 + 12 Power_Cycle_Count -O--CK 100 100 050 - 38 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 371 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 7 +194 Temperature_Celsius -O---K 100 100 050 - 66 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4132 +242 Total_LBAs_Read ----CK 100 100 050 - 2382 +245 Unknown_Attribute -O--CK 100 100 050 - 165 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 66 Celsius +Power Cycle Min/Max Temperature: 66/66 Celsius +Lifetime Min/Max Temperature: 23/75 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x010 4 2552 --- Power-on Hours +0x01 0x018 6 270845205 --- Logical Sectors Written +0x01 0x020 6 10797822 --- Number of Write Commands +0x01 0x028 6 156139708 --- Logical Sectors Read +0x01 0x030 6 2775948 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 17 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/HUGWORLD/SSD/SSD 512GB/465CBE969CE5 b/SSD/HUGWORLD/SSD/SSD 512GB/465CBE969CE5 new file mode 100644 index 000000000..16bfd9aea --- /dev/null +++ b/SSD/HUGWORLD/SSD/SSD 512GB/465CBE969CE5 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUGWORLD SSD 512GB +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 11 23:06:37 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5709 + 12 Power_Cycle_Count -O--CK 100 100 050 - 51 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 8787 +165 Unknown_Attribute -O--CK 100 100 050 - 29 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 17 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 39 +194 Temperature_Celsius -O---K 100 100 050 - 67 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 113588 +242 Total_LBAs_Read ----CK 100 100 050 - 10617 +245 Unknown_Attribute -O--CK 100 100 050 - 88275 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 67 Celsius +Power Cycle Min/Max Temperature: 67/67 Celsius +Lifetime Min/Max Temperature: 23/75 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x010 4 5709 --- Power-on Hours +0x01 0x018 6 3149152642 --- Logical Sectors Written +0x01 0x020 6 101866307 --- Number of Write Commands +0x01 0x028 6 695814709 --- Logical Sectors Read +0x01 0x030 6 7981666 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Hanstor/M.2/M.2 256GB/548818203BBF b/SSD/Hanstor/M.2/M.2 256GB/548818203BBF new file mode 100644 index 000000000..fd94c988a --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/548818203BBF @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 13 21:54:23 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 51 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +164 Unknown_Attribute ------ 100 100 000 - 12885360645 +165 Unknown_Attribute ------ 100 100 000 - 7 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 5 +194 Temperature_Celsius -O---K 036 036 000 - 36 (Min/Max 26/42) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 132 +242 Total_LBAs_Read -O--CK 100 100 000 - 135 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: ?/37 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (410) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 51 --- Power-on Hours +0x01 0x018 6 277609162 --- Logical Sectors Written +0x01 0x020 6 3799060 --- Number of Write Commands +0x01 0x028 6 284892975 --- Logical Sectors Read +0x01 0x030 6 5206777 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/5F0327ED3DBC b/SSD/Hanstor/M.2/M.2 256GB/5F0327ED3DBC new file mode 100644 index 000000000..121cc9693 --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/5F0327ED3DBC @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 10 07:45:18 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 62 + 12 Power_Cycle_Count -O--C- 100 100 000 - 52 +164 Unknown_Attribute ------ 100 100 000 - 12885229572 +165 Unknown_Attribute ------ 100 100 000 - 5 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 4 +194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 27/39) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 101 +242 Total_LBAs_Read -O--CK 100 100 000 - 113 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/33 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (434) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 62 --- Power-on Hours +0x01 0x018 6 211928578 --- Logical Sectors Written +0x01 0x020 6 3394413 --- Number of Write Commands +0x01 0x028 6 238668016 --- Logical Sectors Read +0x01 0x030 6 4659035 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/6A7197A3AE8B b/SSD/Hanstor/M.2/M.2 256GB/6A7197A3AE8B new file mode 100644 index 000000000..a96b44484 --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/6A7197A3AE8B @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 2 17:36:23 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 236 + 12 Power_Cycle_Count -O--C- 100 100 000 - 22 +164 Unknown_Attribute ------ 100 100 000 - 12885557254 +165 Unknown_Attribute ------ 100 100 000 - 10 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 6 +194 Temperature_Celsius -O---K 034 034 000 - 34 (Min/Max 26/38) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 232 +242 Total_LBAs_Read -O--CK 100 100 000 - 99 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (456) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 236 --- Power-on Hours +0x01 0x018 6 487358923 --- Logical Sectors Written +0x01 0x020 6 4772234 --- Number of Write Commands +0x01 0x028 6 208946695 --- Logical Sectors Read +0x01 0x030 6 4092372 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/6EC524D4D991 b/SSD/Hanstor/M.2/M.2 256GB/6EC524D4D991 new file mode 100644 index 000000000..a88a08537 --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/6EC524D4D991 @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 25 19:12:30 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 14 + 12 Power_Cycle_Count -O--C- 100 100 000 - 25 +164 Unknown_Attribute ------ 100 100 000 - 12885229571 +165 Unknown_Attribute ------ 100 100 000 - 5 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 3 +194 Temperature_Celsius -O---K 033 033 000 - 33 (Min/Max 25/39) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 61 +242 Total_LBAs_Read -O--CK 100 100 000 - 104 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: ?/33 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (207) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 14 --- Power-on Hours +0x01 0x018 6 128599896 --- Logical Sectors Written +0x01 0x020 6 1658660 --- Number of Write Commands +0x01 0x028 6 220088750 --- Logical Sectors Read +0x01 0x030 6 4185193 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/81C5BBD02E63 b/SSD/Hanstor/M.2/M.2 256GB/81C5BBD02E63 new file mode 100644 index 000000000..285493c4f --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/81C5BBD02E63 @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 21 10:00:43 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16 + 12 Power_Cycle_Count -O--C- 100 100 000 - 13 +164 Unknown_Attribute ------ 100 100 000 - 12885164035 +165 Unknown_Attribute ------ 100 100 000 - 4 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 3 +194 Temperature_Celsius -O---K 034 034 000 - 34 (Min/Max 26/39) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 54 +242 Total_LBAs_Read -O--CK 100 100 000 - 99 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (144) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 16 --- Power-on Hours +0x01 0x018 6 114188796 --- Logical Sectors Written +0x01 0x020 6 1558577 --- Number of Write Commands +0x01 0x028 6 208135728 --- Logical Sectors Read +0x01 0x030 6 3877992 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/AD137DA89BA2 b/SSD/Hanstor/M.2/M.2 256GB/AD137DA89BA2 new file mode 100644 index 000000000..cedb51673 --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/AD137DA89BA2 @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 5 22:41:25 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5 + 12 Power_Cycle_Count -O--C- 100 100 000 - 11 +164 Unknown_Attribute ------ 100 100 000 - 12885164035 +165 Unknown_Attribute ------ 100 100 000 - 4 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 3 +194 Temperature_Celsius -O---K 038 038 000 - 38 (Min/Max 27/41) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 55 +242 Total_LBAs_Read -O--CK 100 100 000 - 102 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: ?/40 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (137) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 116677258 --- Logical Sectors Written +0x01 0x020 6 1539745 --- Number of Write Commands +0x01 0x028 6 213951869 --- Logical Sectors Read +0x01 0x030 6 4005955 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/B44A0A2E062A b/SSD/Hanstor/M.2/M.2 256GB/B44A0A2E062A new file mode 100644 index 000000000..d331fac91 --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/B44A0A2E062A @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 25 20:52:03 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 552 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +164 Unknown_Attribute ------ 100 100 000 - 21479751730 +165 Unknown_Attribute ------ 100 100 000 - 75 +166 Unknown_Attribute ------ 100 100 000 - 5 +167 Unknown_Attribute -O---K 100 100 000 - 50 +194 Temperature_Celsius -O---K 036 036 000 - 36 (Min/Max 27/39) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 6387 +242 Total_LBAs_Read -O--CK 100 100 000 - 102 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: ?/36 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (326) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 552 --- Power-on Hours +0x01 0x018 6 13395947647 --- Logical Sectors Written +0x01 0x020 6 138883455 --- Number of Write Commands +0x01 0x028 6 215237850 --- Logical Sectors Read +0x01 0x030 6 3999920 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 256GB/F38AFA33A6FF b/SSD/Hanstor/M.2/M.2 256GB/F38AFA33A6FF new file mode 100644 index 000000000..209e8e85f --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 256GB/F38AFA33A6FF @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 256GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN18609 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 11 18:56:06 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 325 + 12 Power_Cycle_Count -O--C- 100 100 000 - 19 +164 Unknown_Attribute ------ 100 100 000 - 12885229572 +165 Unknown_Attribute ------ 100 100 000 - 5 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 4 +194 Temperature_Celsius -O---K 036 036 000 - 36 (Min/Max 24/40) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 109 +242 Total_LBAs_Read -O--CK 100 100 000 - 110 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: ?/39 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (9) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 325 --- Power-on Hours +0x01 0x018 6 229439474 --- Logical Sectors Written +0x01 0x020 6 3463429 --- Number of Write Commands +0x01 0x028 6 232595662 --- Logical Sectors Read +0x01 0x030 6 4631413 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hanstor/M.2/M.2 512GB/6E3EDEE3A0BD b/SSD/Hanstor/M.2/M.2 512GB/6E3EDEE3A0BD new file mode 100644 index 000000000..d7c24ade6 --- /dev/null +++ b/SSD/Hanstor/M.2/M.2 512GB/6E3EDEE3A0BD @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hanstor M.2 512GB +Serial Number: -- +LU WWN Device Id: 5 3a5a27 ... +Firmware Version: SN19590 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Dec 8 02:47:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5 + 12 Power_Cycle_Count -O--C- 100 100 000 - 13 +164 Unknown_Attribute ------ 100 100 000 - 12885164035 +165 Unknown_Attribute ------ 100 100 000 - 4 +166 Unknown_Attribute ------ 100 100 000 - 3 +167 Unknown_Attribute -O---K 100 100 000 - 3 +194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 27/37) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 54 +242 Total_LBAs_Read -O--CK 100 100 000 - 104 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (137) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 114242933 --- Logical Sectors Written +0x01 0x020 6 1730144 --- Number of Write Commands +0x01 0x028 6 218448449 --- Logical Sectors Read +0x01 0x030 6 4204960 --- Number of Read Commands +0x01 0x038 6 14677700 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hikvision/HS-SSD-E100/HS-SSD-E100 1024G/2BA2933DA162 b/SSD/Hikvision/HS-SSD-E100/HS-SSD-E100 1024G/2BA2933DA162 new file mode 100644 index 000000000..29e2996f9 --- /dev/null +++ b/SSD/Hikvision/HS-SSD-E100/HS-SSD-E100 1024G/2BA2933DA162 @@ -0,0 +1,188 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HS-SSD-E100 1024G +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: HS14825 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 10 13:43:21 2025 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4230 + 12 Power_Cycle_Count -O--C- 100 100 000 - 30 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 196614 +170 Unknown_Attribute PO--CK 100 100 010 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O---K 100 100 000 - 0 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 113520446 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 117 +183 Runtime_Bad_Block PO--CK 100 100 000 - 0 +184 End-to-End_Error PO-RCK 100 100 090 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 18 +194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 24/41) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 4 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 52 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 25 +231 Unknown_SSD_Attribute PO---K 099 099 005 - 1 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 10097 +234 Unknown_Attribute -O--CK 100 100 000 - 3966564 +241 Total_LBAs_Written -O--CK 100 100 000 - 1945 +242 Total_LBAs_Read -O--CK 100 100 000 - 735 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (326) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 4230 --- Power-on Hours +0x01 0x018 6 4079104706 --- Logical Sectors Written +0x01 0x020 6 161001544 --- Number of Write Commands +0x01 0x028 6 1542475795 --- Logical Sectors Read +0x01 0x030 6 23232866 --- Number of Read Commands +0x01 0x038 6 3897871596384 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Hikvision/HS-SSD-E100/HS-SSD-E100 128G/142CA278C545 b/SSD/Hikvision/HS-SSD-E100/HS-SSD-E100 128G/142CA278C545 new file mode 100644 index 000000000..16bcc813f --- /dev/null +++ b/SSD/Hikvision/HS-SSD-E100/HS-SSD-E100 128G/142CA278C545 @@ -0,0 +1,188 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HS-SSD-E100 128G +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN09405 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 22 12:52:15 2025 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 15581 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 11 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 097 097 010 - 589842 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 133154013312 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 369 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/48) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 31 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 153 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 128 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 13878 +211 Unknown_Attribute -O--CK 200 200 000 - 1790 +231 Unknown_SSD_Attribute PO---K 092 092 005 - 8 +241 Total_LBAs_Written -O--CK 100 100 000 - 6541 +242 Total_LBAs_Read -O--CK 100 100 000 - 39 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (462) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 15581 --- Power-on Hours +0x01 0x018 6 13718692226 --- Logical Sectors Written +0x01 0x020 6 193234492 --- Number of Write Commands +0x01 0x028 6 81800164 --- Logical Sectors Read +0x01 0x030 6 3121712 --- Number of Read Commands +0x01 0x038 6 13780549416516 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/44E66EE5D428 b/SSD/Hoodisk/SSD/SSD 128GB/44E66EE5D428 new file mode 100644 index 000000000..718920da4 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/44E66EE5D428 @@ -0,0 +1,156 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 4 15:36:55 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 11518 + 12 Power_Cycle_Count -O--C- 100 100 000 - 49 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 000 - 0/142 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 225 (Average 202) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 79 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 5199 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 11518 --- Power-on Hours +0x01 0x018 6 10904321625 --- Logical Sectors Written +0x01 0x028 6 280996248 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/48D9A4AA6538 b/SSD/Hoodisk/SSD/SSD 128GB/48D9A4AA6538 new file mode 100644 index 000000000..b9e9c55dc --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/48D9A4AA6538 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 11 03:15:33 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 42533 + 12 Power_Cycle_Count -O--C- 100 100 000 - 26 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 255 255 010 - 57 +173 Unknown_Attribute -O--C- 100 100 000 - 62850000 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 22 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 4 +241 Total_LBAs_Written -O--C- 100 100 000 - 38880 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 42533 --- Power-on Hours +0x01 0x018 6 81537999362 --- Logical Sectors Written +0x01 0x028 6 2343802964 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 95 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/6A7A5AC47D81 b/SSD/Hoodisk/SSD/SSD 128GB/6A7A5AC47D81 new file mode 100644 index 000000000..ff039bc85 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/6A7A5AC47D81 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 7 22:51:21 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 23346 + 12 Power_Cycle_Count -O--C- 100 100 000 - 35 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/61 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1491 (Average 1460) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 24 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 44192 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x010 4 23346 --- Power-on Hours +0x01 0x018 6 92679158866 --- Logical Sectors Written +0x01 0x028 6 120752735 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 42 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 43 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/8A6A9BE931A2 b/SSD/Hoodisk/SSD/SSD 128GB/8A6A9BE931A2 new file mode 100644 index 000000000..84cf014bf --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/8A6A9BE931A2 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFMP1B3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Apr 22 15:50:52 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 26612 + 12 Power_Cycle_Count -O--C- 100 100 000 - 32 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 33 +173 Unknown_Attribute -O--C- 100 100 000 - 7209090 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 21 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 89 +241 Total_LBAs_Written -O--C- 100 100 000 - 19801 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 26612 --- Power-on Hours +0x01 0x018 6 41525840950 --- Logical Sectors Written +0x01 0x028 6 237737884 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 160 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/DB36F99DF307 b/SSD/Hoodisk/SSD/SSD 128GB/DB36F99DF307 new file mode 100644 index 000000000..e16e12b45 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/DB36F99DF307 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 30 02:42:40 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 14881 + 12 Power_Cycle_Count -O--C- 100 100 000 - 40 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/33 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 108 (Average 86) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 25 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 91 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2979 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 14881 --- Power-on Hours +0x01 0x018 6 6249220312 --- Logical Sectors Written +0x01 0x028 6 107274531 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/F03051CC02B4 b/SSD/Hoodisk/SSD/SSD 128GB/F03051CC02B4 new file mode 100644 index 000000000..3c6229e6a --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/F03051CC02B4 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 23 09:15:56 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34629 + 12 Power_Cycle_Count -O--C- 100 100 000 - 50 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 255 255 010 - 58 +173 Unknown_Attribute -O--C- 100 100 000 - 263917532 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 35 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 134051 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 34629 --- Power-on Hours +0x01 0x018 6 281125831875 --- Logical Sectors Written +0x01 0x028 6 15048029434 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/F6D9CCF355BA b/SSD/Hoodisk/SSD/SSD 128GB/F6D9CCF355BA new file mode 100644 index 000000000..dc5d46c92 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/F6D9CCF355BA @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 06:14:22 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 41201 + 12 Power_Cycle_Count -O--C- 100 100 000 - 31 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 255 255 010 - 57 +173 Unknown_Attribute -O--C- 100 100 000 - 104662619 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 19 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 62340 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 41201 --- Power-on Hours +0x01 0x018 6 130737664299 --- Logical Sectors Written +0x01 0x028 6 6699492820 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 71 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 72 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 128GB/FC81F741340A b/SSD/Hoodisk/SSD/SSD 128GB/FC81F741340A new file mode 100644 index 000000000..dea41aee2 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 128GB/FC81F741340A @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFMP1B3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Apr 22 16:19:48 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 26794 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 31 +173 Unknown_Attribute -O--C- 100 100 000 - 66061330 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 16 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 208809 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 26794 --- Power-on Hours +0x01 0x018 6 437905294388 --- Logical Sectors Written +0x01 0x028 6 3332780212 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 418 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 16GB/288791AA51B3 b/SSD/Hoodisk/SSD/SSD 16GB/288791AA51B3 new file mode 100644 index 000000000..2343978c7 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 16GB/288791AA51B3 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 12 00:57:58 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 23520 + 12 Power_Cycle_Count -O--C- 100 100 000 - 52 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/9 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 7492 (Average 7431) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 43 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 59902 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 23520 --- Power-on Hours +0x01 0x018 6 125624477659 --- Logical Sectors Written +0x01 0x028 6 90254988 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 183 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 16GB/BB7F126F4BE9 b/SSD/Hoodisk/SSD/SSD 16GB/BB7F126F4BE9 new file mode 100644 index 000000000..64c624931 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 16GB/BB7F126F4BE9 @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 10 23:52:56 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 49925 + 12 Power_Cycle_Count -O--C- 100 100 000 - 166 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/11 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 601 (Average 564) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 129 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 81 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6499 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4196 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 166 --- Lifetime Power-On Resets +0x01 0x010 4 49925 --- Power-on Hours +0x01 0x018 6 13630177402 --- Logical Sectors Written +0x01 0x028 6 4093787723 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Hoodisk/SSD/SSD 256GB/2BD43A8F5F36 b/SSD/Hoodisk/SSD/SSD 256GB/2BD43A8F5F36 new file mode 100644 index 000000000..77e10c21c --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 256GB/2BD43A8F5F36 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMJ1.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 6 19:06:02 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34778 + 12 Power_Cycle_Count -O--C- 100 100 000 - 45 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 084 084 010 - 0/62 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 3945 (Average 3876) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 39 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 230390 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x010 4 34778 --- Power-on Hours +0x01 0x018 6 483163985172 --- Logical Sectors Written +0x01 0x028 6 134807824824 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 56 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 57 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 256GB/36AC6BEE29DA b/SSD/Hoodisk/SSD/SSD 256GB/36AC6BEE29DA new file mode 100644 index 000000000..de5f63326 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 256GB/36AC6BEE29DA @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMJ1.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 13 21:07:00 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 43625 + 12 Power_Cycle_Count -O--C- 100 100 000 - 119 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 086 086 010 - 0/51 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 3310 (Average 3293) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 100 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 297557 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 119 --- Lifetime Power-On Resets +0x01 0x010 4 43625 --- Power-on Hours +0x01 0x018 6 624024322672 --- Logical Sectors Written +0x01 0x028 6 423665454 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 256GB/4C0C84BF3DFA b/SSD/Hoodisk/SSD/SSD 256GB/4C0C84BF3DFA new file mode 100644 index 000000000..ee5381b7e --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 256GB/4C0C84BF3DFA @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 24 21:50:43 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 52881 + 12 Power_Cycle_Count -O--C- 100 100 000 - 34 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/68 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 363 (Average 322) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 24 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 89 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 23160 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 52881 --- Power-on Hours +0x01 0x018 6 48571025031 --- Logical Sectors Written +0x01 0x028 6 7032593596 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 161 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/00355C5F6BE3 b/SSD/Hoodisk/SSD/SSD 32GB/00355C5F6BE3 new file mode 100644 index 000000000..053b5fc6e --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/00355C5F6BE3 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Apr 9 12:59:19 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 17523 + 12 Power_Cycle_Count -O--C- 100 100 000 - 61 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 092 092 010 - 0/24 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 197 (Average 146) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 41 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 95 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2953 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 61 --- Lifetime Power-On Resets +0x01 0x010 4 17523 --- Power-on Hours +0x01 0x018 6 6193624622 --- Logical Sectors Written +0x01 0x028 6 1720367504 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/14BA9F81345D b/SSD/Hoodisk/SSD/SSD 32GB/14BA9F81345D new file mode 100644 index 000000000..42973d193 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/14BA9F81345D @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBBA3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Jan 14 03:36:17 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 30605 + 12 Power_Cycle_Count -O--C- 100 100 000 - 52 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 085 085 010 - 13 +173 Unknown_Attribute -O--C- 100 100 000 - 190057320 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 44 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 13077 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 30605 --- Power-on Hours +0x01 0x018 6 27425735190 --- Logical Sectors Written +0x01 0x028 6 7099790453 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/39B18D5FA33A b/SSD/Hoodisk/SSD/SSD 32GB/39B18D5FA33A new file mode 100644 index 000000000..116a73e0d --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/39B18D5FA33A @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 00:30:35 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 40555 + 12 Power_Cycle_Count -O--C- 100 100 000 - 87 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/35 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 709 (Average 668) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 84 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 77 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 15342 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 87 --- Lifetime Power-On Resets +0x01 0x010 4 40555 --- Power-on Hours +0x01 0x018 6 32176381435 --- Logical Sectors Written +0x01 0x028 6 6686716584 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 744 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 22 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/3B23FF368345 b/SSD/Hoodisk/SSD/SSD 32GB/3B23FF368345 new file mode 100644 index 000000000..6c2d5b615 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/3B23FF368345 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBBA3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 14 12:55:55 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 34694 + 12 Power_Cycle_Count -O--C- 100 100 000 - 58 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 080 080 010 - 17 +173 Unknown_Attribute -O--C- 100 100 000 - 71566426 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 36 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 10698 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 34694 --- Power-on Hours +0x01 0x018 6 22436198252 --- Logical Sectors Written +0x01 0x028 6 1452465153 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/565A7D61C04D b/SSD/Hoodisk/SSD/SSD 32GB/565A7D61C04D new file mode 100644 index 000000000..9d92657ba --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/565A7D61C04D @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 10 19:04:52 2025 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 41334 + 12 Power_Cycle_Count -O--C- 100 100 000 - 188 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 088 088 010 - 0/42 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1222 (Average 1164) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 159 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 61 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 15532 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 188 --- Lifetime Power-On Resets +0x01 0x010 4 41334 --- Power-on Hours +0x01 0x018 6 32574986948 --- Logical Sectors Written +0x01 0x028 6 14230831441 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 38 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/5A36C5C04507 b/SSD/Hoodisk/SSD/SSD 32GB/5A36C5C04507 new file mode 100644 index 000000000..44fef996f --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/5A36C5C04507 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBBA3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 12 01:04:48 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5 + 12 Power_Cycle_Count -O--C- 100 100 000 - 14 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 057 057 010 - 29 +173 Unknown_Attribute -O--C- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 11 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--C- 100 100 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 10112547 --- Logical Sectors Written +0x01 0x028 6 2885319 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/605BF8D72919 b/SSD/Hoodisk/SSD/SSD 32GB/605BF8D72919 new file mode 100644 index 000000000..4387aebe9 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/605BF8D72919 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun May 4 07:56:51 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 37089 + 12 Power_Cycle_Count -O--C- 100 100 000 - 163 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 095 095 010 - 0/17 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1770 (Average 1707) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 153 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 43 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 25220 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 163 --- Lifetime Power-On Resets +0x01 0x010 4 37089 --- Power-on Hours +0x01 0x018 6 52891401268 --- Logical Sectors Written +0x01 0x028 6 203258677 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 56 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/8ACE5D6BAAB5 b/SSD/Hoodisk/SSD/SSD 32GB/8ACE5D6BAAB5 new file mode 100644 index 000000000..fdc3108cb --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/8ACE5D6BAAB5 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFMP1.3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 31 00:59:47 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 26917 + 12 Power_Cycle_Count -O--C- 100 100 000 - 27 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 8 +173 Unknown_Attribute -O--C- 100 100 000 - 85198127 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 11376 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 26917 --- Power-on Hours +0x01 0x018 6 23858621063 --- Logical Sectors Written +0x01 0x028 6 4900996914 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 83 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/A6FF3E097B49 b/SSD/Hoodisk/SSD/SSD 32GB/A6FF3E097B49 new file mode 100644 index 000000000..98c0d7498 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/A6FF3E097B49 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 12 12:54:35 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 53750 + 12 Power_Cycle_Count -O--C- 100 100 000 - 172 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 088 088 010 - 0/37 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 341 (Average 308) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 89 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 7851 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 172 --- Lifetime Power-On Resets +0x01 0x010 4 53750 --- Power-on Hours +0x01 0x018 6 16464951791 --- Logical Sectors Written +0x01 0x028 6 980310077 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/FF8DCB75A697 b/SSD/Hoodisk/SSD/SSD 32GB/FF8DCB75A697 new file mode 100644 index 000000000..92f6f49e9 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/FF8DCB75A697 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBBA3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 26 11:17:29 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 37101 + 12 Power_Cycle_Count -O--C- 100 100 000 - 69 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 082 082 010 - 16 +173 Unknown_Attribute -O--C- 100 100 000 - 104924754 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 37 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 15848 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 69 --- Lifetime Power-On Resets +0x01 0x010 4 37101 --- Power-on Hours +0x01 0x018 6 33237704593 --- Logical Sectors Written +0x01 0x028 6 368262083 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 512GB/5FD7D027509C b/SSD/Hoodisk/SSD/SSD 512GB/5FD7D027509C new file mode 100644 index 000000000..3c6454c82 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 512GB/5FD7D027509C @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMT1.3 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 24 12:21:26 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 17615 + 12 Power_Cycle_Count -O--C- 100 100 000 - 29 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/121 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 21 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 5 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 17615 --- Power-on Hours +0x01 0x018 6 11673489 --- Logical Sectors Written +0x01 0x028 6 1876204 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/062071847C65 b/SSD/Hoodisk/SSD/SSD 64GB/062071847C65 new file mode 100644 index 000000000..91d34bcfb --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/062071847C65 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 28 14:23:37 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 56920 + 12 Power_Cycle_Count -O--C- 100 100 000 - 130 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 086 086 010 - 0/76 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 448 (Average 428) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 120 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 85 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 20982 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 130 --- Lifetime Power-On Resets +0x01 0x010 4 56920 --- Power-on Hours +0x01 0x018 6 44002467800 --- Logical Sectors Written +0x01 0x028 6 137872086 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/1B9107D9C677 b/SSD/Hoodisk/SSD/SSD 64GB/1B9107D9C677 new file mode 100644 index 000000000..afec1d343 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/1B9107D9C677 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM21.1 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Mar 23 21:12:32 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 26886 + 12 Power_Cycle_Count -O--C- 100 100 000 - 69 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 080 080 010 - 1/39 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 251 (Average 145) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 62 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 95 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 10370 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 69 --- Lifetime Power-On Resets +0x01 0x010 4 26886 --- Power-on Hours +0x01 0x018 6 21748739353 --- Logical Sectors Written +0x01 0x028 6 44004158 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/613069B5CD17 b/SSD/Hoodisk/SSD/SSD 64GB/613069B5CD17 new file mode 100644 index 000000000..e878c5910 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/613069B5CD17 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Sep 27 23:20:50 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 15190 + 12 Power_Cycle_Count -O--C- 100 100 000 - 733 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 090 090 010 - 0/67 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 60 (Average 41) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 700 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 98 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2177 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 733 --- Lifetime Power-On Resets +0x01 0x010 4 15190 --- Power-on Hours +0x01 0x018 6 4566659462 --- Logical Sectors Written +0x01 0x028 6 3679813178 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 143 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 144 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/6EFBB59B2DCF b/SSD/Hoodisk/SSD/SSD 64GB/6EFBB59B2DCF new file mode 100644 index 000000000..1ec80f106 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/6EFBB59B2DCF @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 14 19:25:08 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2350 + 12 Power_Cycle_Count -O--C- 100 100 000 - 63 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 074 074 010 - 38 +173 Unknown_Attribute -O--C- 100 100 000 - 15925503 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 43 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 75 +241 Total_LBAs_Written -O--C- 100 100 000 - 4026 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 63 --- Lifetime Power-On Resets +0x01 0x010 4 2350 --- Power-on Hours +0x01 0x018 6 8444978027 --- Logical Sectors Written +0x01 0x028 6 320107458 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 65 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 66 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/7C3212ECA2F8 b/SSD/Hoodisk/SSD/SSD 64GB/7C3212ECA2F8 new file mode 100644 index 000000000..d6c0a3ccb --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/7C3212ECA2F8 @@ -0,0 +1,154 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 17:07:27 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 248) Self-test routine in progress... + 80% of test remaining. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 26297 + 12 Power_Cycle_Count -O--C- 100 100 000 - 181 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 080 080 010 - 30 +173 Unknown_Attribute -O--C- 100 100 000 - 31261173 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 52 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 52 +241 Total_LBAs_Written -O--C- 100 100 000 - 9416 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 181 --- Lifetime Power-On Resets +0x01 0x010 4 26297 --- Power-on Hours +0x01 0x018 6 19747640344 --- Logical Sectors Written +0x01 0x028 6 510598376 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 47 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/7CCB158A355E b/SSD/Hoodisk/SSD/SSD 64GB/7CCB158A355E new file mode 100644 index 000000000..291562ec9 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/7CCB158A355E @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 01:19:25 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 40181 + 12 Power_Cycle_Count -O--C- 100 100 000 - 30 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 083 083 010 - 24 +173 Unknown_Attribute -O--C- 100 100 000 - 214371553 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 13 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 34913 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 40181 --- Power-on Hours +0x01 0x018 6 73219100979 --- Logical Sectors Written +0x01 0x028 6 181409512 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/8F204070C068 b/SSD/Hoodisk/SSD/SSD 64GB/8F204070C068 new file mode 100644 index 000000000..5a3aa7021 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/8F204070C068 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 30 17:50:10 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 41267 + 12 Power_Cycle_Count -O--C- 100 100 000 - 104 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 083 083 010 - 29 +173 Unknown_Attribute -O--C- 100 100 000 - 855126874 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 69 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 118606 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 104 --- Lifetime Power-On Resets +0x01 0x010 4 41267 --- Power-on Hours +0x01 0x018 6 248736203007 --- Logical Sectors Written +0x01 0x028 6 5581799637 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/9AE911D1AB66 b/SSD/Hoodisk/SSD/SSD 64GB/9AE911D1AB66 new file mode 100644 index 000000000..53b654592 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/9AE911D1AB66 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.1 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 10 18:15:55 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 61647 + 12 Power_Cycle_Count -O--C- 100 100 000 - 130 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 071 071 010 - 0/82 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1851 (Average 1734) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 72 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 42 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 89830 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 130 --- Lifetime Power-On Resets +0x01 0x010 4 61647 --- Power-on Hours +0x01 0x018 6 188388514706 --- Logical Sectors Written +0x01 0x028 6 2344877972 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 57 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/A0BD664D2C67 b/SSD/Hoodisk/SSD/SSD 64GB/A0BD664D2C67 new file mode 100644 index 000000000..8bb23716e --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/A0BD664D2C67 @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 29 10:51:37 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 14165 + 12 Power_Cycle_Count -O--C- 100 100 000 - 86 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 078 078 010 - 0/109 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 43 (Average 39) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 59 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 98 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2293 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 86 --- Lifetime Power-On Resets +0x01 0x010 4 14165 --- Power-on Hours +0x01 0x018 6 4808875840 --- Logical Sectors Written +0x01 0x028 6 90381989 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/B28311FDC791 b/SSD/Hoodisk/SSD/SSD 64GB/B28311FDC791 new file mode 100644 index 000000000..6be56b51d --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/B28311FDC791 @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 18 17:42:17 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 33115 + 12 Power_Cycle_Count -O--C- 100 100 000 - 76 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/19 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 314 (Average 284) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 63 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 90 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 30133 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 33115 --- Power-on Hours +0x01 0x018 6 63194179279 --- Logical Sectors Written +0x01 0x028 6 3509549117 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 309 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/E5BCC18ED1E0 b/SSD/Hoodisk/SSD/SSD 64GB/E5BCC18ED1E0 new file mode 100644 index 000000000..fadcc7162 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/E5BCC18ED1E0 @@ -0,0 +1,165 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 10 19:54:37 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 52472 + 12 Power_Cycle_Count -O--C- 100 100 000 - 90 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 080 080 010 - 0/74 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 4916 (Average 4892) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 40 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 193509 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 43312 - +# 2 Short offline Completed without error 00% 25650 - +# 3 Short offline Completed without error 00% 25650 - +# 4 Short offline Completed without error 00% 8344 - +# 5 Short offline Completed without error 00% 6117 - +# 6 Short offline Completed without error 00% 4964 - +# 7 Short offline Completed without error 00% 4628 - +# 8 Short offline Completed without error 00% 4192 - +# 9 Short offline Completed without error 00% 1201 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 90 --- Lifetime Power-On Resets +0x01 0x010 4 52472 --- Power-on Hours +0x01 0x018 6 405818344999 --- Logical Sectors Written +0x01 0x028 6 6456297051 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/INDMEM/SSD mSATA/SSD mSATA 64GB/8141B8A56268 b/SSD/INDMEM/SSD mSATA/SSD mSATA 64GB/8141B8A56268 new file mode 100644 index 000000000..7d67e44ae --- /dev/null +++ b/SSD/INDMEM/SSD mSATA/SSD mSATA 64GB/8141B8A56268 @@ -0,0 +1,146 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INDMEM SSD mSATA 64GB +Serial Number: -- +Firmware Version: U0707A0 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 13 15:23:04 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 14182 + 12 Power_Cycle_Count -O--CK 100 100 050 - 53 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 286175 +165 Unknown_Attribute -O--CK 100 100 050 - 2883 +166 Unknown_Attribute -O--CK 100 100 050 - 303 +167 Unknown_Attribute -O--CK 100 100 050 - 586 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 92 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 42 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 22 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 305113 +242 Total_LBAs_Read ----CK 100 100 050 - 456 +245 Unknown_Attribute -O--CK 100 100 050 - 98553 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x010 4 14182 --- Power-on Hours +0x01 0x018 6 2816035628 --- Logical Sectors Written +0x01 0x020 6 1572 --- Number of Write Commands +0x01 0x028 6 29917686 --- Logical Sectors Read +0x01 0x030 6 6474 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/INNOVATION IT/SSD_2/SSD_2.5-inch_TLC_120GB_InnovationIT/334F6984ABC3 b/SSD/INNOVATION IT/SSD_2/SSD_2.5-inch_TLC_120GB_InnovationIT/334F6984ABC3 new file mode 100644 index 000000000..f360b9f53 --- /dev/null +++ b/SSD/INNOVATION IT/SSD_2/SSD_2.5-inch_TLC_120GB_InnovationIT/334F6984ABC3 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD_2.5"_TLC_120GB_InnovationIT +Serial Number: -- +Firmware Version: X0126A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 25 15:38:13 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 915 + 12 Power_Cycle_Count -O--CK 100 100 050 - 32 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 106 +164 Unknown_Attribute -O--CK 100 100 050 - 1666 +165 Unknown_Attribute -O--CK 100 100 050 - 11 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 5 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 21 +194 Temperature_Celsius -O---K 100 100 050 - 36 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7914 +242 Total_LBAs_Read ----CK 100 100 050 - 304 +245 Unknown_Attribute -O--CK 100 100 050 - 5690 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/36 Celsius +Lifetime Min/Max Temperature: 28/44 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 915 --- Power-on Hours +0x01 0x018 6 518700135 --- Logical Sectors Written +0x01 0x020 6 8038047 --- Number of Write Commands +0x01 0x028 6 19924872 --- Logical Sectors Read +0x01 0x030 6 673021 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/IPASON/P100/P100 512GB M.2 SATA/651A4F41B501 b/SSD/IPASON/P100/P100 512GB M.2 SATA/651A4F41B501 new file mode 100644 index 000000000..3ff36f70c --- /dev/null +++ b/SSD/IPASON/P100/P100 512GB M.2 SATA/651A4F41B501 @@ -0,0 +1,173 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IPASON P100 512GB M.2 SATA +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H220829a +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 28 07:19:14 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 730 + 12 Power_Cycle_Count ------+ 100 100 000 - 980 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 131076 +173 Unknown_Attribute ------+ 200 200 000 - 8592687125 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 246 +192 Power-Off_Retract_Count ------+ 100 100 000 - 132 +194 Temperature_Celsius ------+ 051 051 000 - 51 (Min/Max 6/54) +231 Unknown_SSD_Attribute ------+ 100 100 005 - 0 +233 Media_Wearout_Indicator ------+ 100 100 000 - 4857 +234 Unknown_Attribute ------+ 100 100 005 - 939118 +241 Total_LBAs_Written ------+ 100 100 000 - 2764 +242 Total_LBAs_Read ------+ 100 100 000 - 2681 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: ?/52 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (339) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 980 --- Lifetime Power-On Resets +0x01 0x010 4 730 --- Power-on Hours +0x01 0x018 6 5798340137 --- Logical Sectors Written +0x01 0x020 6 102879104 --- Number of Write Commands +0x01 0x028 6 5622663466 --- Logical Sectors Read +0x01 0x030 6 80424232 --- Number of Read Commands +0x01 0x038 6 672641229676 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Indilinx/InM2246/InM2246S3-256G/5378C2F95F33 b/SSD/Indilinx/InM2246/InM2246S3-256G/5378C2F95F33 new file mode 100644 index 000000000..66ed1c6a2 --- /dev/null +++ b/SSD/Indilinx/InM2246/InM2246S3-256G/5378C2F95F33 @@ -0,0 +1,172 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: InM2246S3/256G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: Q0707A +User Capacity: 255,636,453,376 bytes [255 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 13 22:56:55 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 + 9 Power_On_Hours ------ 100 100 050 - 7017 + 12 Power_Cycle_Count ------ 100 100 050 - 70 +160 Unknown_Attribute ------ 100 100 050 - 0 +161 Unknown_Attribute ------ 100 100 050 - 52 +162 Unknown_Attribute ------ 100 100 050 - 1 +163 Unknown_Attribute ------ 100 100 050 - 11 +164 Unknown_Attribute ------ 100 100 050 - 38769 +165 Unknown_Attribute ------ 100 100 050 - 64 +166 Unknown_Attribute ------ 100 100 050 - 13 +167 Unknown_Attribute ------ 100 100 050 - 38 +168 Unknown_Attribute ------ 100 100 050 - 3000 +169 Unknown_Attribute ------ 099 099 050 - 99 +192 Power-Off_Retract_Count ------ 100 100 050 - 44 +194 Temperature_Celsius ------ 100 100 050 - 36 +195 Hardware_ECC_Recovered ------ 100 100 050 - 60 +196 Reallocated_Event_Count ------ 100 100 050 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +241 Total_LBAs_Written ------ 100 100 050 - 89198 +242 Total_LBAs_Read ------ 100 100 050 - 108779 +245 Unknown_Attribute ------ 100 100 050 - 214937 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x31 GPL - 4 Reserved +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 70 --- Lifetime Power-On Resets +0x01 0x010 4 7017 --- Power-on Hours +0x01 0x018 6 1550721233 --- Logical Sectors Written +0x01 0x020 6 80273224 --- Number of Write Commands +0x01 0x028 6 2834038211 --- Logical Sectors Read +0x01 0x030 6 111022883 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4347400 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 49 --- Average Short Term Temperature +0x05 0x018 1 67 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 36 --- Lowest Temperature +0x05 0x030 1 -5 --- Highest Average Short Term Temperature +0x05 0x038 1 1 --- Lowest Average Short Term Temperature +0x05 0x040 1 -1 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 100 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1828 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Inland/SATA SSD/SATA SSD 2TB/F179B64B156A b/SSD/Inland/SATA SSD/SATA SSD 2TB/F179B64B156A new file mode 100644 index 000000000..7aeff613b --- /dev/null +++ b/SSD/Inland/SATA SSD/SATA SSD 2TB/F179B64B156A @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Inland SATA SSD +Serial Number: -- +Firmware Version: X0219A0 +User Capacity: 2,048,408,248,320 bytes [2.04 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 7 16:45:27 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6 + 12 Power_Cycle_Count -O--CK 100 100 050 - 7 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 16 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1706 +242 Total_LBAs_Read ----CK 100 100 050 - 0 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 6 --- Power-on Hours +0x01 0x018 6 111826736 --- Logical Sectors Written +0x01 0x020 6 460069 --- Number of Write Commands +0x01 0x028 6 33687 --- Logical Sectors Read +0x01 0x030 6 1494 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Inland/SATA SSD/SATA SSD 512GB/41A1A476D116 b/SSD/Inland/SATA SSD/SATA SSD 512GB/41A1A476D116 new file mode 100644 index 000000000..14d6464b7 --- /dev/null +++ b/SSD/Inland/SATA SSD/SATA SSD 512GB/41A1A476D116 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Inland SATA SSD +Serial Number: -- +Firmware Version: U0430A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 4 21:51:40 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 19738 + 12 Power_Cycle_Count -O--CK 100 100 050 - 80 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 24 +164 Unknown_Attribute -O--CK 100 100 050 - 55558 +165 Unknown_Attribute -O--CK 100 100 050 - 306 +166 Unknown_Attribute -O--CK 100 100 050 - 20 +167 Unknown_Attribute -O--CK 100 100 050 - 106 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 67 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 2377013 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 414399 +242 Total_LBAs_Read ----CK 100 100 050 - 735655 +245 Unknown_Attribute -O--CK 100 100 050 - 314038 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 19687 - +# 2 Short offline Completed without error 00% 19579 - +# 3 Short offline Self-test routine in progress 90% 19579 - +# 4 Short offline Completed without error 00% 18864 - +# 5 Short offline Self-test routine in progress 90% 18864 - +# 6 Short offline Completed without error 00% 16669 - +# 7 Short offline Self-test routine in progress 90% 16669 - +# 8 Short offline Completed without error 00% 16036 - +# 9 Short offline Self-test routine in progress 90% 16036 - +#10 Short offline Completed without error 00% 15294 - +#11 Short offline Self-test routine in progress 90% 15294 - +#12 Short offline Completed without error 00% 14101 - +#13 Short offline Self-test routine in progress 90% 14101 - +#14 Short offline Completed without error 00% 13857 - +#15 Short offline Self-test routine in progress 90% 13857 - +#16 Short offline Completed without error 00% 13097 - +#17 Short offline Self-test routine in progress 90% 13097 - +#18 Short offline Completed without error 00% 12397 - +#19 Short offline Self-test routine in progress 90% 12397 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 80 --- Lifetime Power-On Resets +0x01 0x010 4 19738 --- Power-on Hours +0x01 0x018 6 1388269287 --- Logical Sectors Written +0x01 0x020 6 4744475 --- Number of Write Commands +0x01 0x028 6 967270403 --- Logical Sectors Read +0x01 0x030 6 152298 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Innodisk/2/2.5-inch SATA SSD 3MG2-P/B986694E06E0 b/SSD/Innodisk/2/2.5-inch SATA SSD 3MG2-P/B986694E06E0 new file mode 100644 index 000000000..7b7150238 --- /dev/null +++ b/SSD/Innodisk/2/2.5-inch SATA SSD 3MG2-P/B986694E06E0 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Innodisk 3IE2/3ME2/3MG2/3SE2/3TG6 SSDs +Device Model: 2.5" SATA SSD 3MG2-P +Serial Number: -- +Firmware Version: M161225 +User Capacity: 31,016,853,504 bytes [31.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 28 19:27:07 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 244) Self-test routine in progress... + 40% of test remaining. +Total time to complete Offline +data collection: ( 60) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 816 + 12 Power_Cycle_Count ------ 100 100 000 - 45 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Number_of_Pure_Spare ------ 100 100 000 - 118 +163 Total_Bad_Block_Count ------ 100 100 000 - 6 +164 Total_Erase_Count ------ 100 100 000 - 323303 +165 Max_Erase_Count ------ 100 100 000 - 359 +166 Min_Erase_Count ------ 100 100 000 - 258 +167 Average_Erase_Count ------ 100 100 000 - 305 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 90 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 1745 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 18 +194 Temperature_Celsius ------ 100 100 000 - 35 +195 Hardware_ECC_Recovered ------ 100 100 000 - 162 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 183471 +242 Host_Reads_32MiB ------ 100 100 000 - 64794 +245 Flash_Writes_32MiB ------ 100 100 000 - 323303 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Self-test routine in progress 40% 816 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x010 4 816 --- Power-on Hours +0x01 0x018 6 12023984306 --- Logical Sectors Written +0x01 0x020 6 183994078 --- Number of Write Commands +0x01 0x028 6 4246361645 --- Logical Sectors Read +0x01 0x030 6 17624722 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 18 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 97 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Innodisk/Corp./Corp. - mSATA 3ME3/42497B4FCFD5 b/SSD/Innodisk/Corp./Corp. - mSATA 3ME3/42497B4FCFD5 new file mode 100644 index 000000000..1f811a8c9 --- /dev/null +++ b/SSD/Innodisk/Corp./Corp. - mSATA 3ME3/42497B4FCFD5 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs +Device Model: InnoDisk Corp. - mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S17411 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 21 23:40:57 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Read SCT Status failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Later_Bad_Block PO--C- 100 100 001 - 0 + 7 Seek_Error_Rate ------ 000 000 000 - 0 + 8 Seek_Time_Performance ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 122 000 000 - 13178 + 10 Spin_Retry_Count ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 009 000 000 - 9 +163 Total_Bad_Block_Count ------ 000 000 000 - 13 +168 SATA_PHY_Error_Count ------ 000 000 000 - 0 +169 Remaining_Lifetime_Perc ------ 076 000 000 - 76 +175 Bad_Cluster_Table_Count ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Data_Log_Write_Count ------ 000 247 000 - 34499457 +240 Write_Head ------ 000 000 000 - 0 +165 Max_Erase_Count -O---- 222 001 000 - 734 +167 Average_Erase_Count -O---- 205 001 000 - 717 +170 Spare_Block_Count PO---- 100 001 000 - 153 +171 Program_Fail_Count -O---- 000 001 000 - 0 +172 Erase_Fail_Count -O---- 000 001 000 - 0 +176 RANGE_RECORD_Count ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Flash_ID -O---- 100 001 000 - 0x517693943a98 +232 Spares_Remaining_Perc PO---- 100 001 000 - 0 +235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0 +241 Host_Writes_32MiB -O---- 100 001 000 - 134763 +242 Host_Reads_32MiB -O---- 100 001 000 - 759 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/Corp./Corp. - mSATA 3ME3/57641E57A893 b/SSD/Innodisk/Corp./Corp. - mSATA 3ME3/57641E57A893 new file mode 100644 index 000000000..fd44d1f8a --- /dev/null +++ b/SSD/Innodisk/Corp./Corp. - mSATA 3ME3/57641E57A893 @@ -0,0 +1,139 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs +Device Model: InnoDisk Corp. - mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S15A19 +User Capacity: 8,012,390,400 bytes [8.01 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jan 9 21:59:38 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Read SCT Status failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Later_Bad_Block PO--C- 100 100 001 - 0 + 7 Seek_Error_Rate ------ 000 000 000 - 0 + 8 Seek_Time_Performance ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 255 000 000 - 255 + 10 Spin_Retry_Count ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 029 000 000 - 29 +163 Total_Bad_Block_Count ------ 000 000 000 - 8 +168 SATA_PHY_Error_Count ------ 000 000 000 - 0 +169 Remaining_Lifetime_Perc ------ 039 000 000 - 39 +175 Bad_Cluster_Table_Count ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Data_Log_Write_Count ------ 000 111 000 - 2063566 +240 Write_Head ------ 000 000 000 - 0 +165 Max_Erase_Count -O---- 216 001 000 - 2008 +167 Average_Erase_Count -O---- 017 001 000 - 1809 +170 Spare_Block_Count PO---- 100 001 000 - 69 +171 Program_Fail_Count -O---- 000 001 000 - 0 +172 Erase_Fail_Count -O---- 000 001 000 - 0 +176 RANGE_RECORD_Count ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Flash_ID -O---- 100 001 000 - 0x51769394de98 +232 Spares_Remaining_Perc PO---- 100 001 000 - 0 +235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0 +241 Host_Writes_32MiB -O---- 100 001 000 - 8060 +242 Host_Reads_32MiB -O---- 100 001 000 - 654 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory Version 1 +Address Access R/W Size Description +0x00 GPL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL R/W 16 Host vendor specific log +0xe0 GPL R/W 1 SCT Command/Status +0xe1 GPL R/W 1 SCT Data Transfer + +ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Comprehensive Error Log failed + +SMART Error Log not supported + +ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Self-test Log failed + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 21 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/217D93FB94A6 b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/217D93FB94A6 new file mode 100644 index 000000000..ccd174e3b --- /dev/null +++ b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/217D93FB94A6 @@ -0,0 +1,128 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 08GB mSATA 3ME A +Serial Number: -- +Firmware Version: S141002 +User Capacity: 7,998,537,728 bytes [7.99 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Unavailable +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 28 16:46:45 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 11720 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 100 100 000 - 1484 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 000 000 000 - 0 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 + 1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552 +197 Current_Pending_Sector ------ 000 000 000 - 0 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +225 Unknown_SSD_Attribute ------ 000 198 000 - 12830779 +170 Unknown_Attribute PO---- 100 100 --- - 1114112 +173 Unknown_Attribute -O---- 100 100 --- - 379590166 +229 Unknown_Attribute -O---- 100 100 --- - 88470212370072 +236 Unknown_Attribute -O---- 100 100 --- - 0 +235 Unknown_Attribute -O---- 100 000 --- - 0 +176 Erase_Fail_Count_Chip ------ 100 000 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory Version 1 +Address Access R/W Size Description +0x00 GPL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL R/W 16 Host vendor specific log +0xe0 GPL R/W 1 SCT Command/Status +0xe1 GPL R/W 1 SCT Data Transfer + +ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Comprehensive Error Log failed + +SMART Error Log not supported + +ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Self-test Log failed + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 11 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/B00894231CA9 b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/B00894231CA9 new file mode 100644 index 000000000..30885f495 --- /dev/null +++ b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/B00894231CA9 @@ -0,0 +1,128 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 08GB mSATA 3ME A +Serial Number: -- +Firmware Version: S141002 +User Capacity: 7,998,537,728 bytes [7.99 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Unavailable +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 24 15:17:41 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 2921 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 100 100 000 - 194 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 000 000 000 - 0 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 + 1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552 +197 Current_Pending_Sector ------ 000 000 000 - 0 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +225 Unknown_SSD_Attribute ------ 000 140 000 - 248074 +170 Unknown_Attribute PO---- 100 100 --- - 589824 +173 Unknown_Attribute -O---- 100 100 --- - 4194336 +229 Unknown_Attribute -O---- 100 100 --- - 88470212370072 +236 Unknown_Attribute -O---- 100 100 --- - 0 +235 Unknown_Attribute -O---- 100 000 --- - 0 +176 Erase_Fail_Count_Chip ------ 100 000 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory Version 1 +Address Access R/W Size Description +0x00 GPL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL R/W 16 Host vendor specific log +0xe0 GPL R/W 1 SCT Command/Status +0xe1 GPL R/W 1 SCT Data Transfer + +ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Comprehensive Error Log failed + +SMART Error Log not supported + +ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Self-test Log failed + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 7 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/EBDA33293DF8 b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/EBDA33293DF8 new file mode 100644 index 000000000..ab3a12319 --- /dev/null +++ b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME A/EBDA33293DF8 @@ -0,0 +1,130 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 08GB mSATA 3ME A +Serial Number: -- +Firmware Version: S141002 +User Capacity: 7,998,537,728 bytes [7.99 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Unavailable +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 26 11:39:11 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Read SCT Status failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 14489 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 100 100 000 - 1947 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 000 000 000 - 0 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 + 1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552 +197 Current_Pending_Sector ------ 000 000 000 - 0 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +225 Unknown_SSD_Attribute ------ 000 104 000 - 1736408 +170 Unknown_Attribute PO---- 100 100 --- - 1114112 +173 Unknown_Attribute -O---- 100 100 --- - 60883749 +229 Unknown_Attribute -O---- 100 100 --- - 88470212370072 +236 Unknown_Attribute -O---- 100 100 --- - 0 +235 Unknown_Attribute -O---- 100 000 --- - 0 +176 Erase_Fail_Count_Chip ------ 100 000 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory Version 1 +Address Access R/W Size Description +0x00 GPL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL R/W 16 Host vendor specific log +0xe0 GPL R/W 1 SCT Command/Status +0xe1 GPL R/W 1 SCT Data Transfer + +ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Comprehensive Error Log failed + +SMART Error Log not supported + +ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Self-test Log failed + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 7 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME3/32BD90E8F919 b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME3/32BD90E8F919 new file mode 100644 index 000000000..3da54c79d --- /dev/null +++ b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME3/32BD90E8F919 @@ -0,0 +1,125 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 08GB mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S16425G3 +User Capacity: 7,998,537,728 bytes [7.99 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Dec 20 10:24:35 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 103 000 000 - 103 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 049 000 000 - 49 +163 Unknown_Attribute ------ 000 000 000 - 4 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 099 000 000 - 99 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Unknown_SSD_Attribute ------ 000 205 000 - 406664 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +165 Unknown_Attribute -O---- 030 001 000 - 30 +167 Unknown_Attribute -O---- 013 001 000 - 13 +170 Unknown_Attribute PO---- 100 001 000 - 75 +171 Unknown_Attribute -O---- 000 001 000 - 0 +172 Unknown_Attribute -O---- 000 001 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Unknown_Attribute -O---- 100 001 000 - 89569723997848 +232 Available_Reservd_Space PO---- 100 001 000 - 0 +235 Unknown_Attribute -O---- 000 000 000 - 0 +241 Total_LBAs_Written -O---- 100 001 000 - 1588 +242 Total_LBAs_Read -O---- 100 001 000 - 783 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME3/54C4202DC2FC b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME3/54C4202DC2FC new file mode 100644 index 000000000..297eda5d3 --- /dev/null +++ b/SSD/Innodisk/DEMSR- 08/DEMSR- 08GB mSATA 3ME3/54C4202DC2FC @@ -0,0 +1,127 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 08GB mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S16425 +User Capacity: 7,998,537,728 bytes [7.99 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 9 15:22:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Read SCT Status failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 061 000 000 - 10301 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 195 000 000 - 1219 +163 Unknown_Attribute ------ 000 000 000 - 10 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 099 000 000 - 99 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Unknown_SSD_Attribute ------ 000 163 000 - 319919 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +165 Unknown_Attribute -O---- 011 001 000 - 11 +167 Unknown_Attribute -O---- 008 001 000 - 8 +170 Unknown_Attribute PO---- 100 001 000 - 69 +171 Unknown_Attribute -O---- 000 001 000 - 0 +172 Unknown_Attribute -O---- 000 001 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Unknown_Attribute -O---- 100 001 000 - 89569723997848 +232 Available_Reservd_Space PO---- 100 001 000 - 0 +235 Unknown_Attribute -O---- 000 000 000 - 0 +241 Total_LBAs_Written -O---- 100 001 000 - 1249 +242 Total_LBAs_Read -O---- 100 001 000 - 4494 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 16/DEMSR- 16GB mSATA 3ME3/13324E016BA8 b/SSD/Innodisk/DEMSR- 16/DEMSR- 16GB mSATA 3ME3/13324E016BA8 new file mode 100644 index 000000000..6f65bbaef --- /dev/null +++ b/SSD/Innodisk/DEMSR- 16/DEMSR- 16GB mSATA 3ME3/13324E016BA8 @@ -0,0 +1,127 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 16GB mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S16425G3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 14 16:19:31 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Read SCT Status failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 194 000 000 - 11970 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 250 000 000 - 1274 +163 Unknown_Attribute ------ 000 000 000 - 14 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 096 000 000 - 96 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Unknown_SSD_Attribute ------ 000 177 000 - 1540596 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +165 Unknown_Attribute -O---- 123 001 000 - 123 +167 Unknown_Attribute -O---- 119 001 000 - 119 +170 Unknown_Attribute PO---- 100 001 000 - 64 +171 Unknown_Attribute -O---- 000 001 000 - 0 +172 Unknown_Attribute -O---- 000 001 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Unknown_Attribute -O---- 100 001 000 - 89569723997848 +232 Available_Reservd_Space PO---- 100 001 000 - 0 +235 Unknown_Attribute -O---- 000 000 000 - 0 +241 Total_LBAs_Written -O---- 100 001 000 - 6017 +242 Total_LBAs_Read -O---- 100 001 000 - 34801 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 17 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 16/DEMSR- 16GB mSATA 3ME3/86DA217EDD5C b/SSD/Innodisk/DEMSR- 16/DEMSR- 16GB mSATA 3ME3/86DA217EDD5C new file mode 100644 index 000000000..be20fad9f --- /dev/null +++ b/SSD/Innodisk/DEMSR- 16/DEMSR- 16GB mSATA 3ME3/86DA217EDD5C @@ -0,0 +1,125 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 16GB mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S16425G3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 15 16:23:59 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 007 000 000 - 28935 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 136 000 000 - 392 +163 Unknown_Attribute ------ 000 000 000 - 9 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 088 000 000 - 88 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 000 000 000 - 0 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Unknown_SSD_Attribute ------ 000 064 000 - 1314276 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +165 Unknown_Attribute -O---- 242 001 000 - 498 +167 Unknown_Attribute -O---- 102 001 000 - 358 +170 Unknown_Attribute PO---- 100 001 000 - 69 +171 Unknown_Attribute -O---- 000 001 000 - 0 +172 Unknown_Attribute -O---- 000 001 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Unknown_Attribute -O---- 100 001 000 - 89569723997848 +232 Available_Reservd_Space PO---- 100 001 000 - 0 +235 Unknown_Attribute -O---- 000 000 000 - 0 +241 Total_LBAs_Written -O---- 100 001 000 - 5133 +242 Total_LBAs_Read -O---- 100 001 000 - 5425 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Innodisk/DEMSR- 64/DEMSR- 64GB mSATA 3ME3/25EE4744E6FC b/SSD/Innodisk/DEMSR- 64/DEMSR- 64GB mSATA 3ME3/25EE4744E6FC new file mode 100644 index 000000000..3c846433f --- /dev/null +++ b/SSD/Innodisk/DEMSR- 64/DEMSR- 64GB mSATA 3ME3/25EE4744E6FC @@ -0,0 +1,125 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Innodisk DEMSR- 64GB mSATA 3ME3 +Serial Number: -- +LU WWN Device Id: 5 24693e ... +Firmware Version: S16425G3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 27 08:45:00 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 + 2 Throughput_Performance ------ 000 000 000 - 0 + 3 Spin_Up_Time ------ 000 000 000 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0 + 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 9 Power_On_Hours -O---- 229 000 000 - 16357 + 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 + 12 Power_Cycle_Count -O---- 190 000 000 - 190 +163 Unknown_Attribute ------ 000 000 000 - 25 +168 Unknown_Attribute ------ 000 000 000 - 0 +169 Unknown_Attribute ------ 069 000 000 - 69 +175 Program_Fail_Count_Chip ------ 000 000 000 - 0 +192 Power-Off_Retract_Count ------ 001 000 000 - 1 +194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0) +197 Current_Pending_Sector -O--C- 000 100 000 - 0 +225 Unknown_SSD_Attribute ------ 000 045 000 - 13851869 +240 Unknown_SSD_Attribute ------ 000 000 000 - 0 +165 Unknown_Attribute -O---- 037 001 000 - 1061 +167 Unknown_Attribute -O---- 133 001 000 - 901 +170 Unknown_Attribute PO---- 100 001 000 - 131 +171 Unknown_Attribute -O---- 000 001 000 - 0 +172 Unknown_Attribute -O---- 000 001 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 001 000 - 0 +187 Reported_Uncorrect -O---- 000 001 000 - 0 +229 Unknown_Attribute -O---- 100 001 000 - 89569723955864 +232 Available_Reservd_Space PO---- 100 001 000 - 0 +235 Unknown_Attribute -O---- 000 000 000 - 0 +241 Total_LBAs_Written -O---- 100 001 000 - 54108 +242 Total_LBAs_Read -O---- 100 001 000 - 49183 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Integral/INSSD256/INSSD256GM242/AD68ED98DCC4 b/SSD/Integral/INSSD256/INSSD256GM242/AD68ED98DCC4 new file mode 100644 index 000000000..e949a0e1a --- /dev/null +++ b/SSD/Integral/INSSD256/INSSD256GM242/AD68ED98DCC4 @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INSSD256GM242 +Serial Number: -- +Firmware Version: W1115A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 4 19:12:09 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 278 + 12 Power_Cycle_Count -O--CK 100 100 050 - 807 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 5 +164 Unknown_Attribute -O--CK 100 100 050 - 2297 +165 Unknown_Attribute -O--CK 100 100 050 - 25 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 9 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 211 +194 Temperature_Celsius -O---K 100 100 050 - 32 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 24811 +242 Total_LBAs_Read ----CK 100 100 050 - 29252 +245 Unknown_Attribute -O--CK 100 100 050 - 29318 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 19/47 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 807 --- Lifetime Power-On Resets +0x01 0x010 4 278 --- Power-on Hours +0x01 0x018 6 1626036425 --- Logical Sectors Written +0x01 0x020 6 10148185 --- Number of Write Commands +0x01 0x028 6 1917066684 --- Logical Sectors Read +0x01 0x030 6 12061456 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Integral/V Series SATA SSD/V Series SATA SSD 120GB/D0C02CC97639 b/SSD/Integral/V Series SATA SSD/V Series SATA SSD 120GB/D0C02CC97639 new file mode 100644 index 000000000..a31922021 --- /dev/null +++ b/SSD/Integral/V Series SATA SSD/V Series SATA SSD 120GB/D0C02CC97639 @@ -0,0 +1,120 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: V Series SATA SSD 120GB +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V2.7 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 19:30:18 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 2783 + 12 Power_Cycle_Count PO--CK 100 100 010 - 1640 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 57302 +165 Unknown_Attribute PO--CK 100 100 010 - 193 +166 Unknown_Attribute PO--CK 100 100 010 - 11 +167 Unknown_Attribute PO--CK 100 100 010 - 29 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 4314 +242 Total_LBAs_Read PO--CK 100 100 010 - 5638 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Intel/LK0800/LK0800GEYMU/1429271A0F87 b/SSD/Intel/LK0800/LK0800GEYMU/1429271A0F87 new file mode 100644 index 000000000..a36dfcc01 --- /dev/null +++ b/SSD/Intel/LK0800/LK0800GEYMU/1429271A0F87 @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LK0800GEYMU +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 00:52:46 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 55) minutes. +Conveyance self-test routine +recommended polling time: ( 55) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 285262 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 42625 +173 Unknown_Attribute PO--CK 099 099 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 768802694198 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 3202710 +194 Temperature_Celsius -O---K 100 100 000 - 22 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 22/23 Celsius +Lifetime Min/Max Temperature: 14/30 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (16) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x018 6 132504380656 --- Logical Sectors Written +0x01 0x020 6 1798530192 --- Number of Write Commands +0x01 0x028 6 694346299108 --- Logical Sectors Read +0x01 0x030 6 3890416197 --- Number of Read Commands +0x01 0x038 6 3129249964 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 30 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 23 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 27945 --- Number of Hardware Resets +0x06 0x010 4 165 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/LK0800/LK0800GEYMU/5B3D611853BA b/SSD/Intel/LK0800/LK0800GEYMU/5B3D611853BA new file mode 100644 index 000000000..edd3c8800 --- /dev/null +++ b/SSD/Intel/LK0800/LK0800GEYMU/5B3D611853BA @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LK0800GEYMU +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 00:52:46 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 55) minutes. +Conveyance self-test routine +recommended polling time: ( 55) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 208210 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 42607 +173 Unknown_Attribute PO--CK 099 099 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 773097661434 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 3125634 +194 Temperature_Celsius -O---K 100 100 000 - 22 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 22/23 Celsius +Lifetime Min/Max Temperature: 14/29 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (173) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 57 --- Lifetime Power-On Resets +0x01 0x018 6 159274988706 --- Logical Sectors Written +0x01 0x020 6 1959805382 --- Number of Write Commands +0x01 0x028 6 813097087580 --- Logical Sectors Read +0x01 0x030 6 5180090075 --- Number of Read Commands +0x01 0x038 6 3061949568 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13240 --- Number of Hardware Resets +0x06 0x010 4 164 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/LK0800/LK0800GEYMU/6AC6CBBE3C88 b/SSD/Intel/LK0800/LK0800GEYMU/6AC6CBBE3C88 new file mode 100644 index 000000000..0a3c7a671 --- /dev/null +++ b/SSD/Intel/LK0800/LK0800GEYMU/6AC6CBBE3C88 @@ -0,0 +1,197 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LK0800GEYMU +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 00:52:46 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 55) minutes. +Conveyance self-test routine +recommended polling time: ( 55) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 188322 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 42626 +173 Unknown_Attribute PO--CK 099 099 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 768802693758 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 3105746 +194 Temperature_Celsius -O---K 100 100 000 - 22 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 22/24 Celsius +Lifetime Min/Max Temperature: 14/29 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (47) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x018 6 161617000486 --- Logical Sectors Written +0x01 0x020 6 2147853415 --- Number of Write Commands +0x01 0x028 6 503396618839 --- Logical Sectors Read +0x01 0x030 6 4022891065 --- Number of Read Commands +0x01 0x038 6 3131137940 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 16 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 21472 --- Number of Hardware Resets +0x06 0x010 4 139 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/LK0800/LK0800GEYMU/7C9FDFADE505 b/SSD/Intel/LK0800/LK0800GEYMU/7C9FDFADE505 new file mode 100644 index 000000000..d96c8bc42 --- /dev/null +++ b/SSD/Intel/LK0800/LK0800GEYMU/7C9FDFADE505 @@ -0,0 +1,199 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LK0800GEYMU +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWTHPG1 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Mar 14 00:52:46 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Disabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 55) minutes. +Conveyance self-test routine +recommended polling time: ( 55) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 205770 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 42626 +173 Unknown_Attribute PO--CK 099 099 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 768802694218 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 3123194 +194 Temperature_Celsius -O---K 100 100 000 - 22 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 22/24 Celsius +Lifetime Min/Max Temperature: 14/29 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (170) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x018 6 165123679670 --- Logical Sectors Written +0x01 0x020 6 1994767813 --- Number of Write Commands +0x01 0x028 6 523435330856 --- Logical Sectors Read +0x01 0x030 6 4288353234 --- Number of Read Commands +0x01 0x038 6 3131679442 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 16 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11040 --- Number of Hardware Resets +0x06 0x010 4 139 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDMCEAC030/SSDMCEAC030B3/9BC21547A8B7 b/SSD/Intel/SSDMCEAC030/SSDMCEAC030B3/9BC21547A8B7 new file mode 100644 index 000000000..a535701e6 --- /dev/null +++ b/SSD/Intel/SSDMCEAC030/SSDMCEAC030B3/9BC21547A8B7 @@ -0,0 +1,187 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 525 Series SSDs +Device Model: INTEL SSDMCEAC030B3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LLLi +User Capacity: 30,016,659,456 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 2 14:56:12 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 732) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 2327h+30m+54.400s + 12 Power_Cycle_Count -O--CK 100 100 000 - 683 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 48 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +190 Airflow_Temperature_Cel -O---K 050 056 000 - 50 (Min/Max 21/56) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 48 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 17649 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 56 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 17649 +242 Host_Reads_32MiB -O--CK 100 100 000 - 23264 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 675 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 33/54 Celsius +Lifetime Min/Max Temperature: 21/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (71) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 689 --- Lifetime Power-On Resets +0x01 0x010 4 2334 --- Power-on Hours +0x01 0x018 6 1247456487 --- Logical Sectors Written +0x01 0x028 6 1600439357 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4771 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4771 --- Number of Hardware Resets +0x06 0x010 4 4090 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDMCEAC060/SSDMCEAC060B3/54640E8CB022 b/SSD/Intel/SSDMCEAC060/SSDMCEAC060B3/54640E8CB022 new file mode 100644 index 000000000..6d54a94f2 --- /dev/null +++ b/SSD/Intel/SSDMCEAC060/SSDMCEAC060B3/54640E8CB022 @@ -0,0 +1,185 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 525 Series SSDs +Device Model: INTEL SSDMCEAC060B3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LLLi +User Capacity: 30,000,000,512 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jan 31 22:32:17 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1465) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 55019h+23m+34.330s + 12 Power_Cycle_Count -O--CK 100 100 000 - 2006 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1986 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +190 Airflow_Temperature_Cel -O---K 052 097 000 - 52 (Min/Max 12/97) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1986 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 493790 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 8 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 493790 +242 Host_Reads_32MiB -O--CK 100 100 000 - 47498 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 14926 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 16/72 Celsius +Lifetime Min/Max Temperature: 12/97 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (468) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2014 --- Lifetime Power-On Resets +0x01 0x010 4 55027 --- Power-on Hours +0x01 0x018 6 32510434908 --- Logical Sectors Written +0x01 0x028 6 3247274906 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10116 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10116 --- Number of Hardware Resets +0x06 0x010 4 4427 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDMCEAW240/SSDMCEAW240A4/A07EEB8EDC00 b/SSD/Intel/SSDMCEAW240/SSDMCEAW240A4/A07EEB8EDC00 new file mode 100644 index 000000000..1bdb4a360 --- /dev/null +++ b/SSD/Intel/SSDMCEAW240/SSDMCEAW240A4/A07EEB8EDC00 @@ -0,0 +1,222 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDMCEAW240A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC33 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Apr 18 20:08:00 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 9913h+44m+11.590s + 12 Power_Cycle_Count -O--CK 097 097 000 - 3852 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 98 +183 SATA_Downshift_Count -O--CK 100 100 000 - 218 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 043 064 000 - 43 (Min/Max -21/64) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 98 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2194 +225 Host_Writes_32MiB -O--CK 100 100 000 - 382524 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 55 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 382524 +242 Host_Reads_32MiB -O--CK 100 100 000 - 475051 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 55581 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9845 - +# 2 Short offline Completed without error 00% 9845 - +# 3 Offline Interrupted (host reset) 10% 9808 - +# 4 Offline Interrupted (host reset) 10% 9808 - +# 5 Offline Interrupted (host reset) 10% 9761 - +# 6 Offline Interrupted (host reset) 10% 9761 - +# 7 Offline Interrupted (host reset) 10% 9758 - +# 8 Offline Interrupted (host reset) 10% 9757 - +# 9 Offline Interrupted (host reset) 10% 9757 - +#10 Offline Interrupted (host reset) 10% 9757 - +#11 Offline Interrupted (host reset) 10% 9756 - +#12 Offline Interrupted (host reset) 10% 9755 - +#13 Offline Interrupted (host reset) 10% 9754 - +#14 Offline Interrupted (host reset) 10% 9749 - +#15 Offline Interrupted (host reset) 10% 9749 - +#16 Offline Interrupted (host reset) 10% 9748 - +#17 Offline Interrupted (host reset) 10% 9747 - +#18 Offline Interrupted (host reset) 10% 9746 - +#19 Offline Interrupted (host reset) 10% 9746 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: -21/64 Celsius +Lifetime Min/Max Temperature: -21/74 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (367) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3865 --- Lifetime Power-On Resets +0x01 0x010 4 9924 --- Power-on Hours +0x01 0x018 6 26609018171 --- Logical Sectors Written +0x01 0x028 6 33037682201 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 24477 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 32 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 24477 --- Number of Hardware Resets +0x06 0x010 4 5904 --- Number of ASR Events +0x06 0x018 4 2194 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSA2/SSDSA2BW080G3H/1DC4961A1959 b/SSD/Intel/SSDSA2/SSDSA2BW080G3H/1DC4961A1959 new file mode 100644 index 000000000..f10fb26f5 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2BW080G3H/1DC4961A1959 @@ -0,0 +1,168 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2BW080G3H +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Apr 21 15:23:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 11) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1948 + 12 Power_Cycle_Count -O--CK 100 100 000 - 76 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 50 +183 SATA_Downshift_Count ----CK 100 100 000 - 3 +184 End-to-End_Error -O--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 59 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 476317 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 5100 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 42 +228 Workload_Minutes -O--CK 100 100 000 - 116929 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 096 096 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 476317 +242 Host_Reads_32MiB -O--CK 100 100 000 - 354822 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Invalid Self-test Log index = 0x01a0 (reserved = 0x00) +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 1948 --- Power-on Hours +0x01 0x018 6 31215925109 --- Logical Sectors Written +0x01 0x020 6 21747450 --- Number of Write Commands +0x01 0x028 6 23253637932 --- Logical Sectors Read +0x01 0x030 6 2073216 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 82 --- Number of Hardware Resets +0x06 0x010 4 15 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2BW120G3H/B7D8D6E97FA3 b/SSD/Intel/SSDSA2/SSDSA2BW120G3H/B7D8D6E97FA3 new file mode 100644 index 000000000..a8a9e52e8 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2BW120G3H/B7D8D6E97FA3 @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2BW120G3H +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10365 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Oct 24 16:26:27 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 16) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 66430 + 12 Power_Cycle_Count -O--CK 100 100 000 - 849 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count -O--CK 100 100 010 - 144 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 121 +199 CRC_Error_Count -OS-CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1808318 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4269801470 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 263814071177175 +228 Workload_Minutes -O--CK 100 100 000 - 4294967295 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 087 087 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1808318 +242 Host_Reads_32MiB -O--CK 100 100 000 - 912112 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x65) Completed without error 30% 65280 - +# 2 Offline Self-test routine in progress 150% 65535 - +# 3 Vendor (0x65) Completed without error 30% 65280 - +# 4 Offline Self-test routine in progress 150% 65535 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 849 --- Lifetime Power-On Resets +0x01 0x010 4 66430 --- Power-on Hours +0x01 0x018 6 118509989009 --- Logical Sectors Written +0x01 0x020 6 2910843314 --- Number of Write Commands +0x01 0x028 6 59776186753 --- Logical Sectors Read +0x01 0x030 6 1351061761 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 16401 --- Number of Hardware Resets +0x06 0x010 4 20246963 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CT040G3/AB465E54153F b/SSD/Intel/SSDSA2/SSDSA2CT040G3/AB465E54153F new file mode 100644 index 000000000..a11dc6a48 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CT040G3/AB465E54153F @@ -0,0 +1,169 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CT040G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 40,020,664,320 bytes [40.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Apr 10 21:49:32 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 41268 + 12 Power_Cycle_Count -O--CK 100 100 000 - 149 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 62 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 71 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2838211 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 48170 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 54 +228 Workload_Minutes -O--CK 100 100 000 - 2476053 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 053 053 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2838211 +242 Host_Reads_32MiB -O--CK 100 100 000 - 3454352 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 149 --- Lifetime Power-On Resets +0x01 0x010 4 41268 --- Power-on Hours +0x01 0x018 6 186005008996 --- Logical Sectors Written +0x01 0x020 6 202189930 --- Number of Write Commands +0x01 0x028 6 226384445093 --- Logical Sectors Read +0x01 0x030 6 690966 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 468 --- Number of Hardware Resets +0x06 0x010 4 152 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 47 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 25 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CT040G3/B1EC24A38821 b/SSD/Intel/SSDSA2/SSDSA2CT040G3/B1EC24A38821 new file mode 100644 index 000000000..5e8d287d6 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CT040G3/B1EC24A38821 @@ -0,0 +1,166 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CT040G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 40,020,664,320 bytes [40.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Aug 1 21:50:18 2025 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 37070 + 12 Power_Cycle_Count -O--CK 100 100 000 - 777 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 866 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 419 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 459283 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 3218866175 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 265940027415995 +228 Workload_Minutes -O--CK 100 100 000 - 4294967269 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 091 091 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 459283 +242 Host_Reads_32MiB -O--CK 100 100 000 - 22460 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Invalid Self-test Log index = 0x011a (reserved = 0x00) +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: scsi error medium or hardware error (serious) +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 777 --- Lifetime Power-On Resets +0x01 0x010 4 37070 --- Power-on Hours +0x01 0x018 6 30099615185 --- Logical Sectors Written +0x01 0x020 6 471451786 --- Number of Write Commands +0x01 0x028 6 1471949850 --- Logical Sectors Read +0x01 0x030 6 23518732 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 553 --- Number of Hardware Resets +0x06 0x010 4 653 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CT040G3/E8DC35801562 b/SSD/Intel/SSDSA2/SSDSA2CT040G3/E8DC35801562 new file mode 100644 index 000000000..08fe2c0c4 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CT040G3/E8DC35801562 @@ -0,0 +1,177 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CT040G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 40,020,664,320 bytes [40.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Feb 25 09:16:08 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 65816 + 12 Power_Cycle_Count -O--CK 100 100 000 - 361 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 191 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 136804 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 41633760 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 4 +228 Workload_Minutes -O--CK 100 100 000 - 3939267 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 136804 +242 Host_Reads_32MiB -O--CK 100 100 000 - 7265 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 0 - +# 2 Vendor (0xff) Self-test routine in progress 150% 255 - +# 3 Offline Self-test routine in progress 150% 65535 - +# 4 Vendor (0x6d) Self-test routine in progress 20% 65280 - +# 5 Vendor (0xff) Completed without error 00% 0 - +# 6 Vendor (0xff) Self-test routine in progress 150% 255 - +# 7 Offline Self-test routine in progress 150% 65535 - +# 8 Vendor (0x6d) Self-test routine in progress 20% 65280 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 361 --- Lifetime Power-On Resets +0x01 0x010 4 65816 --- Power-on Hours +0x01 0x018 6 8965615982 --- Logical Sectors Written +0x01 0x020 6 655697014 --- Number of Write Commands +0x01 0x028 6 476164066 --- Logical Sectors Read +0x01 0x030 6 10329760 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 624 --- Number of Hardware Resets +0x06 0x010 4 126 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CW080G3/938B66C6F52B b/SSD/Intel/SSDSA2/SSDSA2CW080G3/938B66C6F52B new file mode 100644 index 000000000..e9ae0bbda --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CW080G3/938B66C6F52B @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CW080G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Dec 30 20:51:47 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 80489 + 12 Power_Cycle_Count -O--CK 100 100 000 - 135 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 45 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3633090 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 34486664 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 1 +228 Workload_Minutes -O--CK 100 100 000 - 3431300335 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 059 059 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3633090 +242 Host_Reads_32MiB -O--CK 100 100 000 - 5878006 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 135 --- Lifetime Power-On Resets +0x01 0x010 4 80489 --- Power-on Hours +0x01 0x018 6 238098205671 --- Logical Sectors Written +0x01 0x020 6 3295791979 --- Number of Write Commands +0x01 0x028 6 385221001330 --- Logical Sectors Read +0x01 0x030 6 1373984348 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 269 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 42 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 42 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CW120G3/693691AFDDFA b/SSD/Intel/SSDSA2/SSDSA2CW120G3/693691AFDDFA new file mode 100644 index 000000000..cb22dc2f3 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CW120G3/693691AFDDFA @@ -0,0 +1,170 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CW120G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Jan 8 16:36:32 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 62011 + 12 Power_Cycle_Count -O--CK 100 100 000 - 799 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 396 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 101 +199 CRC_Error_Count ----CK 100 100 000 - 3 +225 Host_Writes_32MiB -O--CK 100 100 000 - 665545 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4622 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 37 +228 Workload_Minutes -O--CK 100 100 000 - 3707721 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 096 096 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 665545 +242 Host_Reads_32MiB -O--CK 100 100 000 - 392926 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 799 --- Lifetime Power-On Resets +0x01 0x010 4 62011 --- Power-on Hours +0x01 0x018 6 43617192778 --- Logical Sectors Written +0x01 0x020 6 1951629955 --- Number of Write Commands +0x01 0x028 6 25750823608 --- Logical Sectors Read +0x01 0x030 6 438424647 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 34096 --- Number of Hardware Resets +0x06 0x010 4 45299 --- Number of ASR Events +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CW160G3/1FE5F4688D37 b/SSD/Intel/SSDSA2/SSDSA2CW160G3/1FE5F4688D37 new file mode 100644 index 000000000..1553c850f --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CW160G3/1FE5F4688D37 @@ -0,0 +1,167 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CW160G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Aug 1 11:35:21 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2857 + 12 Power_Cycle_Count -O--CK 100 100 000 - 891 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 34 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 432 +199 CRC_Error_Count ----CK 100 100 000 - 4 +225 Host_Writes_32MiB -O--CK 100 100 000 - 534777 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 2121 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 8 +228 Workload_Minutes -O--CK 100 100 000 - 171468 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 534777 +242 Host_Reads_32MiB -O--CK 100 100 000 - 51544 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 891 --- Lifetime Power-On Resets +0x01 0x010 4 2857 --- Power-on Hours +0x01 0x018 6 35047191874 --- Logical Sectors Written +0x01 0x020 6 152439575 --- Number of Write Commands +0x01 0x028 6 3377994282 --- Logical Sectors Read +0x01 0x030 6 19923967 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3798 --- Number of Hardware Resets +0x06 0x010 4 48072 --- Number of ASR Events +0x06 0x018 4 4 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 30 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 49 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2CW300G3/494A50EBC074 b/SSD/Intel/SSDSA2/SSDSA2CW300G3/494A50EBC074 new file mode 100644 index 000000000..25dd1387e --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CW300G3/494A50EBC074 @@ -0,0 +1,170 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CW300G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 300,069,052,416 bytes [300 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Apr 30 23:18:37 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0x0001 +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7535 + 12 Power_Cycle_Count -O--CK 100 100 000 - 7255 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 65 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 200 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1098833 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4026527660 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 95640264506351 +228 Workload_Minutes -O--CK 100 100 000 - 2411558781 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1098833 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1548846 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 7255 --- Lifetime Power-On Resets +0x01 0x010 4 7535 --- Power-on Hours +0x01 0x018 6 72013142919 --- Logical Sectors Written +0x01 0x020 6 1324832750 --- Number of Write Commands +0x01 0x028 6 101505236922 --- Logical Sectors Read +0x01 0x030 6 2502801468 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 25006 --- Number of Hardware Resets +0x06 0x010 4 40119853 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2M160G2GC/E5C55CA40DFD b/SSD/Intel/SSDSA2/SSDSA2M160G2GC/E5C55CA40DFD new file mode 100644 index 000000000..9031b9b45 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2M160G2GC/E5C55CA40DFD @@ -0,0 +1,141 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel X18-M/X25-M/X25-V G2 SSDs +Device Model: INTEL SSDSA2M160G2GC +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 2CV102HA +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun May 18 00:42:53 2025 CEST + +==> WARNING: This drive may require a firmware update to +fix possible drive hangs when reading SMART self-test log: +https://downloadcenter.intel.com/download/26491 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 21 + 9 Power_On_Hours -O--CK 100 100 000 - 89365 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1443 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 286 +225 Host_Writes_32MiB ----CK 200 200 000 - 609537 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 1207 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 3431308615 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +184 End-to-End_Error PO--CK 100 100 099 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 8 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (8 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 33 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 34 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intel/SSDSA2/SSDSA2SH064G1GC/57F5104BAD1F b/SSD/Intel/SSDSA2/SSDSA2SH064G1GC/57F5104BAD1F new file mode 100644 index 000000000..b5221b864 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2SH064G1GC/57F5104BAD1F @@ -0,0 +1,125 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel X25-E SSDs +Device Model: SSDSA2SH064G1GC INTEL +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 045C8790 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Unavailable +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Apr 16 12:38:15 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time ------ 100 000 000 - 0 + 4 Start_Stop_Count ------ 100 000 000 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 62429 + 12 Power_Cycle_Count -O---- 100 100 000 - 391 +192 Unsafe_Shutdown_Count -O---- 100 100 000 - 103 +232 Available_Reservd_Space PO---- 100 100 010 - 0 +233 Media_Wearout_Indicator -O---- 099 099 000 - 0 +225 Host_Writes_32MiB ------ 200 200 000 - 824250 +226 Intel_Internal -O---- 255 000 000 - 0 +227 Intel_Internal -O---- 000 000 000 - 0 +228 Intel_Internal -O---- 000 000 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 SL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x4d GPL - 1 Reserved +0x80-0x9f SL R/W 16 Host vendor specific log +0xff GPL - 65024 Reserved + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Intel/SSDSC1/SSDSC1NB400G4/B1DB95FD1227 b/SSD/Intel/SSDSC1/SSDSC1NB400G4/B1DB95FD1227 new file mode 100644 index 000000000..7e22d924f --- /dev/null +++ b/SSD/Intel/SSDSC1/SSDSC1NB400G4/B1DB95FD1227 @@ -0,0 +1,226 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC1NB400G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 400,088,457,216 bytes [400 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Nov 28 21:33:09 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1748 + 12 Power_Cycle_Count -O--CK 100 100 000 - 573 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 442 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 1465 (1 206) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 075 075 000 - 25 (Min/Max 20/33) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 442 +194 Temperature_Internal -O---K 100 100 000 - 36 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 48081 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 194 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 88 +228 Workload_Minutes -O--CK 100 100 000 - 103225 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 48081 +242 Host_Reads_32MiB -O--CK 100 100 000 - 401902 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 312 - +# 2 Extended offline Completed without error 00% 205 - +# 3 Short offline Completed without error 00% 205 - +# 4 Short offline Completed without error 00% 205 - +# 5 Extended offline Completed without error 00% 73 - +# 6 Short offline Completed without error 00% 73 - +# 7 Short offline Completed without error 00% 73 - +# 8 Short offline Completed without error 00% 73 - +# 9 Short offline Completed without error 00% 73 - +#10 Short offline Completed without error 00% 73 - +#11 Short offline Completed without error 00% 73 - +#12 Short offline Completed without error 00% 73 - +#13 Short offline Completed without error 00% 73 - +#14 Short offline Completed without error 00% 73 - +#15 Extended offline Completed without error 00% 54 - +#16 Conveyance offline Completed without error 00% 54 - +#17 Short offline Completed without error 00% 54 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 20/33 Celsius +Lifetime Min/Max Temperature: 7/39 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 63 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (15) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 573 --- Lifetime Power-On Resets +0x01 0x018 6 3151040690 --- Logical Sectors Written +0x01 0x020 6 25600583 --- Number of Write Commands +0x01 0x028 6 26339086663 --- Logical Sectors Read +0x01 0x030 6 173322535 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 28 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2321 --- Number of Hardware Resets +0x06 0x010 4 1275 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA100G3T/4635B9A2F433 b/SSD/Intel/SSDSC2/SSDSC2BA100G3T/4635B9A2F433 new file mode 100644 index 000000000..8ec203e7d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA100G3T/4635B9A2F433 @@ -0,0 +1,209 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA100G3T +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: 5DV1DL06 +User Capacity: 100,030,242,816 bytes [100 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jun 7 02:26:30 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 852743443 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 45821 + 12 Power_Cycle_Count -O--CK 100 100 000 - 166 + 13 Read_Soft_Error_Rate -O--CK 130 100 000 - 852743443 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 19112 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 1133895090798 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 3235 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 2 +228 Workload_Minutes -O--CK 100 100 000 - 2748266 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 3217572 +245 Unknown_Attribute -O--CK 097 097 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4250 - +# 2 Short offline Completed without error 00% 4 - +# 3 Extended offline Completed without error 00% 2 - +# 4 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 32/46 Celsius +Lifetime Min/Max Temperature: 10/49 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (68) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 166 --- Lifetime Power-On Resets +0x01 0x018 6 210866854987 --- Logical Sectors Written +0x01 0x020 6 2131732237 --- Number of Write Commands +0x01 0x028 6 5685217471 --- Logical Sectors Read +0x01 0x030 6 105482998 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2608 --- Number of Hardware Resets +0x06 0x010 4 1507 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 192 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA400G3/1D3B1D620EDB b/SSD/Intel/SSDSC2/SSDSC2BA400G3/1D3B1D620EDB new file mode 100644 index 000000000..6549e62c5 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA400G3/1D3B1D620EDB @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA400G3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 5DV10270 +User Capacity: 400,088,457,216 bytes [400 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 13 18:22:07 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 40313 + 12 Power_Cycle_Count -O--CK 100 100 000 - 136 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 101 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 634 (214 23) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 084 083 000 - 16 (Min/Max 16/17) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 101 +194 Temperature_Internal -O---K 100 100 000 - 27 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1270916 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 522 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 2418198 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1270916 +242 Host_Reads_32MiB -O--CK 100 100 000 - 220699 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 16 Celsius +Power Cycle Min/Max Temperature: 16/17 Celsius +Lifetime Min/Max Temperature: 3/51 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (283) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 136 --- Lifetime Power-On Resets +0x01 0x018 6 83290797160 --- Logical Sectors Written +0x01 0x020 6 1853279582 --- Number of Write Commands +0x01 0x028 6 14463776554 --- Logical Sectors Read +0x01 0x030 6 391539494 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 16 --- Current Temperature +0x05 0x010 1 15 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 3 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 10 --- Lowest Average Short Term Temperature +0x05 0x040 1 23 --- Highest Average Long Term Temperature +0x05 0x048 1 13 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1773 --- Number of Hardware Resets +0x06 0x010 4 1103 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA400G3/86FDCE1A8550 b/SSD/Intel/SSDSC2/SSDSC2BA400G3/86FDCE1A8550 new file mode 100644 index 000000000..766e95965 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA400G3/86FDCE1A8550 @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA400G3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 5DV10270 +User Capacity: 400,088,457,216 bytes [400 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 15 15:07:00 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 62443 + 12 Power_Cycle_Count -O--CK 100 100 000 - 102 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 69 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 636 (353 2850) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 083 083 000 - 17 (Min/Max 11/24) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 69 +194 Temperature_Internal -O---K 100 100 000 - 28 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 13041118 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4239 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 19 +228 Workload_Minutes -O--CK 100 100 000 - 3746327 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 096 096 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 13041118 +242 Host_Reads_32MiB -O--CK 100 100 000 - 3240017 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 17 Celsius +Power Cycle Min/Max Temperature: 11/24 Celsius +Lifetime Min/Max Temperature: 4/41 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (209) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x018 6 854662719604 --- Logical Sectors Written +0x01 0x020 6 38174036628 --- Number of Write Commands +0x01 0x028 6 212337761414 --- Logical Sectors Read +0x01 0x030 6 7432593173 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 17 --- Current Temperature +0x05 0x010 1 16 --- Average Short Term Temperature +0x05 0x018 1 14 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 11 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 12 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 597 --- Number of Hardware Resets +0x06 0x010 4 294 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA400G3/E0D8317A6FF7 b/SSD/Intel/SSDSC2/SSDSC2BA400G3/E0D8317A6FF7 new file mode 100644 index 000000000..fabee3183 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA400G3/E0D8317A6FF7 @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA400G3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 5DV10270 +User Capacity: 400,088,457,216 bytes [400 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 15 15:07:00 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 58982 + 12 Power_Cycle_Count -O--CK 100 100 000 - 116 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 81 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 634 (332 2850) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 083 083 000 - 17 (Min/Max 12/24) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 81 +194 Temperature_Internal -O---K 100 100 000 - 28 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 26003872 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 8007 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 24 +228 Workload_Minutes -O--CK 100 100 000 - 3538540 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 093 093 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 26003872 +242 Host_Reads_32MiB -O--CK 100 100 000 - 8510156 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 17 Celsius +Power Cycle Min/Max Temperature: 12/24 Celsius +Lifetime Min/Max Temperature: 4/55 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (472) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 116 --- Lifetime Power-On Resets +0x01 0x018 6 1704189814583 --- Logical Sectors Written +0x01 0x020 6 86215380441 --- Number of Write Commands +0x01 0x028 6 557721616788 --- Logical Sectors Read +0x01 0x030 6 31723755397 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 17 --- Current Temperature +0x05 0x010 1 16 --- Average Short Term Temperature +0x05 0x018 1 15 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 10 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 11 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 13 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1277 --- Number of Hardware Resets +0x06 0x010 4 1008 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA400G3T/2A03E75165B6 b/SSD/Intel/SSDSC2/SSDSC2BA400G3T/2A03E75165B6 new file mode 100644 index 000000000..1d4473651 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA400G3T/2A03E75165B6 @@ -0,0 +1,367 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA400G3T +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: 5DV1DL05 +User Capacity: 400,088,457,216 bytes [400 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 13 18:22:07 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 321890 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 84005 + 12 Power_Cycle_Count -O--CK 100 100 000 - 408 + 13 Read_Soft_Error_Rate -O--CK 130 100 000 - 321890 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 66596 +181 Program_Fail_Cnt_Total -O-RCK 100 100 --- - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 --- - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 17 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 1 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 2104535483016 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 10 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 36391 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 2093600 +245 Unknown_Attribute -O--CK 099 099 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 12 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 12 [11] occurred at disk power-on lifetime: 10842 hours (451 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 51 00 80 00 00 16 35 70 00 40 00 Error: at LBA = 0x16357000 = 372600832 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 80 00 00 16 35 70 00 40 00 00:01:18.244 WRITE FPDMA QUEUED + 61 00 00 05 00 00 00 16 35 6b 00 40 00 00:01:18.244 WRITE FPDMA QUEUED + 61 00 00 05 00 00 00 16 35 66 00 40 00 00:01:18.242 WRITE FPDMA QUEUED + 61 00 00 05 00 00 00 16 35 61 00 40 00 00:01:18.239 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 16 35 60 80 40 00 00:01:18.237 WRITE FPDMA QUEUED + +Error 11 [10] occurred at disk power-on lifetime: 9634 hours (401 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.780 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:00:23.729 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.709 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:22.849 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:22.849 IDENTIFY DEVICE + +Error 10 [9] occurred at disk power-on lifetime: 9634 hours (401 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.741 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:01:09.690 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.670 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.621 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.620 IDENTIFY DEVICE + +Error 9 [8] occurred at disk power-on lifetime: 9634 hours (401 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:48.770 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:00:48.720 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:48.700 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:48.650 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:48.650 IDENTIFY DEVICE + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 8 [7] occurred at disk power-on lifetime: 8384 hours (349 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:33.388 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:00:33.337 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:33.317 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:32.482 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:32.482 IDENTIFY DEVICE + +Error 7 [6] occurred at disk power-on lifetime: 8384 hours (349 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:06.628 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:01:06.577 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:06.557 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:05.739 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:05.739 IDENTIFY DEVICE + +Error 6 [5] occurred at disk power-on lifetime: 8384 hours (349 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:47.098 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:00:47.047 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:47.027 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:46.222 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:46.222 IDENTIFY DEVICE + +Error 5 [4] occurred at disk power-on lifetime: 7949 hours (331 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:21.035 IDENTIFY DEVICE + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:00:20.984 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.964 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.936 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.936 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9635 - +# 2 Short offline Completed without error 00% 9498 - +# 3 Short offline Completed without error 00% 9485 - +# 4 Short offline Completed without error 00% 9104 - +# 5 Short offline Completed without error 00% 8386 - +# 6 Short offline Completed without error 00% 8364 - +# 7 Short offline Completed without error 00% 7985 - +# 8 Short offline Completed without error 00% 10 - +# 9 Extended offline Completed without error 00% 6 - +#10 Extended offline Completed without error 00% 1 - +#11 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 17 Celsius +Power Cycle Min/Max Temperature: 17/17 Celsius +Lifetime Min/Max Temperature: 3/41 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (306) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 408 --- Lifetime Power-On Resets +0x01 0x018 6 137206222076 --- Logical Sectors Written +0x01 0x020 6 4407 --- Number of Write Commands +0x01 0x028 6 31922706984 --- Logical Sectors Read +0x01 0x030 6 6779 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 17 --- Current Temperature +0x05 0x010 1 16 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 4 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 11 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 14 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 32855 --- Number of Hardware Resets +0x06 0x010 4 1932 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB080G4/8D708DF2FF46 b/SSD/Intel/SSDSC2/SSDSC2BB080G4/8D708DF2FF46 new file mode 100644 index 000000000..08e0f299e --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB080G4/8D708DF2FF46 @@ -0,0 +1,278 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB080G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jun 12 18:38:04 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 13) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 80596 + 12 Power_Cycle_Count -O--CK 100 100 000 - 274 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 195 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 628 (464 6993) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 059 058 000 - 41 (Min/Max 25/42) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 195 +194 Temperature_Internal -O---K 100 100 000 - 48 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 514711 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 12123 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 21 +228 Workload_Minutes -O--CK 100 100 000 - 4834881 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 089 089 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 514711 +242 Host_Reads_32MiB -O--CK 100 100 000 - 140763 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 13659 hours (569 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 00 00 81 79 00 40 00 Error: ICRC, ABRT at LBA = 0x00817900 = 8485120 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 00 00 81 79 00 40 00 00:02:43.634 WRITE FPDMA QUEUED + 35 00 00 04 00 00 00 00 81 75 00 40 00 00:02:43.632 WRITE DMA EXT + ea 00 00 00 00 00 00 00 00 00 00 00 00 00:02:32.712 FLUSH CACHE EXT + 35 00 00 04 00 00 00 00 81 71 00 40 00 00:02:32.712 WRITE DMA EXT + e1 00 00 00 0f 00 00 00 00 00 00 00 00 00:02:32.711 IDLE IMMEDIATE + +Error 2 [1] occurred at disk power-on lifetime: 13659 hours (569 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 00 00 00 10 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:32.051 READ LOG EXT + 61 00 00 04 00 00 00 00 81 75 00 40 00 00:02:27.013 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 71 00 40 00 00:02:27.009 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 6d 00 40 00 00:02:27.004 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 69 00 40 00 00:02:26.999 WRITE FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 13659 hours (569 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 00 00 81 75 00 40 00 Error: ICRC, ABRT at LBA = 0x00817500 = 8484096 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 00 00 81 75 00 40 00 00:02:27.013 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 71 00 40 00 00:02:27.009 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 6d 00 40 00 00:02:27.004 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 69 00 40 00 00:02:26.999 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 00 81 65 00 40 00 00:02:26.996 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Conveyance offline Completed without error 00% 24 - +# 2 Short offline Completed without error 00% 24 - +# 3 Short offline Completed without error 00% 18 - +# 4 Conveyance offline Completed without error 00% 18 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 25/42 Celsius +Lifetime Min/Max Temperature: 9/42 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 63 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (171) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 274 --- Lifetime Power-On Resets +0x01 0x018 6 33732160476 --- Logical Sectors Written +0x01 0x020 6 671427685 --- Number of Write Commands +0x01 0x028 6 9225061486 --- Logical Sectors Read +0x01 0x030 6 95548213 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 898 --- Number of Hardware Resets +0x06 0x010 4 592 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB080G4/EC81D6629464 b/SSD/Intel/SSDSC2/SSDSC2BB080G4/EC81D6629464 new file mode 100644 index 000000000..659212d56 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB080G4/EC81D6629464 @@ -0,0 +1,213 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB080G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Dec 10 00:12:33 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 13) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 77108 + 12 Power_Cycle_Count -O--CK 100 100 000 - 78 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 60 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 640 (444 2251) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 070 070 000 - 30 (Min/Max 19/36) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 60 +194 Temperature_Internal -O---K 100 100 000 - 37 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2429664 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 34815 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 4626256 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 066 066 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2429664 +242 Host_Reads_32MiB -O--CK 100 100 000 - 299511 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 6 - +# 2 Short offline Completed without error 00% 6 - +# 3 Short offline Completed without error 00% 4 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 19/36 Celsius +Lifetime Min/Max Temperature: 3/43 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (159) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 78 --- Lifetime Power-On Resets +0x01 0x018 6 159230468902 --- Logical Sectors Written +0x01 0x020 6 1897109345 --- Number of Write Commands +0x01 0x028 6 19628766438 --- Logical Sectors Read +0x01 0x030 6 255752762 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1056 --- Number of Hardware Resets +0x06 0x010 4 268 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB080G6/7873B9C922BA b/SSD/Intel/SSDSC2/SSDSC2BB080G6/7873B9C922BA new file mode 100644 index 000000000..862c967ad --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB080G6/7873B9C922BA @@ -0,0 +1,214 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB080G6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: G2010140 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 20 17:12:48 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 38245 + 12 Power_Cycle_Count -O--CK 100 100 000 - 87 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 61 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 4730 (219 61) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 075 073 000 - 25 (Min/Max 25/27) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 61 +194 Temperature_Internal -O---K 100 100 000 - 25 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 3 +225 Host_Writes_32MiB -O--CK 100 100 000 - 453688 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 7475 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 19 +228 Workload_Minutes -O--CK 100 100 000 - 2294270 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 093 093 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 453688 +242 Host_Reads_32MiB -O--CK 100 100 000 - 108912 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 767496 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 36194 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 25/27 Celsius +Lifetime Min/Max Temperature: 19/47 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (477) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 87 --- Lifetime Power-On Resets +0x01 0x018 6 29732897476 --- Logical Sectors Written +0x01 0x020 6 441353192 --- Number of Write Commands +0x01 0x028 6 7137682541 --- Logical Sectors Read +0x01 0x030 6 403529780 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 719 --- Number of Hardware Resets +0x06 0x010 4 519 --- Number of ASR Events +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G4/10E6190DBA24 b/SSD/Intel/SSDSC2/SSDSC2BB120G4/10E6190DBA24 new file mode 100644 index 000000000..0d8ac71db --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G4/10E6190DBA24 @@ -0,0 +1,210 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-CURRENT amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB120G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2012370 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 17 00:40:44 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 35450 + 12 Power_Cycle_Count -O--CK 100 100 000 - 168 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 125 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 627 (191 56) +183 SATA_Downshift_Count -O--CK 100 100 000 - 1 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 074 074 000 - 26 (Min/Max 19/27) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 125 +194 Temperature_Internal -O---K 100 100 000 - 33 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3705892 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 41605 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 8 +228 Workload_Minutes -O--CK 100 100 000 - 2126033 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 060 060 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3705892 +242 Host_Reads_32MiB -O--CK 100 100 000 - 327520 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 19/27 Celsius +Lifetime Min/Max Temperature: 9/42 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (78) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 168 --- Lifetime Power-On Resets +0x01 0x018 6 242869382914 --- Logical Sectors Written +0x01 0x020 6 1464773260 --- Number of Write Commands +0x01 0x028 6 21464353984 --- Logical Sectors Read +0x01 0x030 6 575203633 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 26839 --- Number of Hardware Resets +0x06 0x010 4 558 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G4/2E434BF7EB1B b/SSD/Intel/SSDSC2/SSDSC2BB120G4/2E434BF7EB1B new file mode 100644 index 000000000..c7c78bca1 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G4/2E434BF7EB1B @@ -0,0 +1,209 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB120G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 19 13:18:29 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 71975 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 34 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 654 (423 5366) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 060 059 000 - 40 (Min/Max 38/42) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 34 +194 Temperature_Internal -O---K 100 100 000 - 47 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1452112 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 41369 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 4318306 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 060 060 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1452112 +242 Host_Reads_32MiB -O--CK 100 100 000 - 256236 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 38/42 Celsius +Lifetime Min/Max Temperature: 14/42 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 63 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (388) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x018 6 95165625028 --- Logical Sectors Written +0x01 0x020 6 1571983043 --- Number of Write Commands +0x01 0x028 6 16792705475 --- Logical Sectors Read +0x01 0x030 6 721705786 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 476 --- Number of Hardware Resets +0x06 0x010 4 267 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G6/30641FCAD388 b/SSD/Intel/SSDSC2/SSDSC2BB120G6/30641FCAD388 new file mode 100644 index 000000000..b390bfa4d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G6/30641FCAD388 @@ -0,0 +1,211 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB120G6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: G2010150 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 6 09:59:00 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 18) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16403 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 29379 + 12 Power_Cycle_Count -O--CK 100 100 000 - 572 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 405 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 4590 (112 179) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 075 075 000 - 25 (Min/Max 24/26) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 405 +194 Temperature_Internal -O---K 100 100 000 - 25 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 350617 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 096 096 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 350617 +242 Host_Reads_32MiB -O--CK 100 100 000 - 151250 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 586152 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 15780 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 431174464005 7205814418112774144 Not_testing + 2 360287970189728868 103785267474956 Not_testing + 3 7205816209114136576 360287970189639780 Not_testing + 4 431174464171 7205815118192443392 Not_testing + 5 360287970189639780 79596011664046 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 24/26 Celsius +Lifetime Min/Max Temperature: 16/43 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (288) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 572 --- Lifetime Power-On Resets +0x01 0x018 6 22978074993 --- Logical Sectors Written +0x01 0x020 6 173214599 --- Number of Write Commands +0x01 0x028 6 9912364125 --- Logical Sectors Read +0x01 0x030 6 64313911 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3973 --- Number of Hardware Resets +0x06 0x010 4 2848 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G6/63607AF6BA3A b/SSD/Intel/SSDSC2/SSDSC2BB120G6/63607AF6BA3A new file mode 100644 index 000000000..2993be679 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G6/63607AF6BA3A @@ -0,0 +1,209 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB120G6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: G2010150 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 1 17:28:58 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 66304 + 12 Power_Cycle_Count -O--CK 100 100 000 - 307 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 153 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 5410 (325 2632) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 073 073 000 - 27 (Min/Max 19/29) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 153 +194 Temperature_Internal -O---K 100 100 000 - 27 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 198516 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 3951 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 10 +228 Workload_Minutes -O--CK 100 100 000 - 3977315 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 096 096 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 198516 +242 Host_Reads_32MiB -O--CK 100 100 000 - 30542 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 533622 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 19/29 Celsius +Lifetime Min/Max Temperature: 17/42 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (237) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 307 --- Lifetime Power-On Resets +0x01 0x018 6 13009944912 --- Logical Sectors Written +0x01 0x020 6 204836916 --- Number of Write Commands +0x01 0x028 6 2001606311 --- Logical Sectors Read +0x01 0x030 6 29406412 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2334 --- Number of Hardware Resets +0x06 0x010 4 1308 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G6/B6C59C5EB497 b/SSD/Intel/SSDSC2/SSDSC2BB120G6/B6C59C5EB497 new file mode 100644 index 000000000..e234ab23b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G6/B6C59C5EB497 @@ -0,0 +1,240 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB120G6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: G2010150 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 11 10:19:45 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 31165 + 12 Power_Cycle_Count -O--CK 100 100 000 - 29 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 20 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 4030 (176 8721) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 073 066 000 - 27 (Min/Max 25/34) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 20 +194 Temperature_Internal -O---K 100 100 000 - 27 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 826234 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 7710 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 1869876 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 093 093 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 826234 +242 Host_Reads_32MiB -O--CK 100 100 000 - 135807 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 1040153 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 31131 - +# 2 Short offline Completed without error 00% 30963 - +# 3 Extended offline Completed without error 00% 30915 - +# 4 Short offline Completed without error 00% 30795 - +# 5 Short offline Completed without error 00% 30627 - +# 6 Short offline Completed without error 00% 30459 - +# 7 Short offline Completed without error 00% 30291 - +# 8 Extended offline Completed without error 00% 30171 - +# 9 Short offline Completed without error 00% 30123 - +#10 Short offline Completed without error 00% 29955 - +#11 Short offline Completed without error 00% 29787 - +#12 Short offline Completed without error 00% 29619 - +#13 Short offline Completed without error 00% 29451 - +#14 Extended offline Completed without error 00% 29427 - +#15 Short offline Completed without error 00% 29283 - +#16 Short offline Completed without error 00% 29115 - +#17 Short offline Completed without error 00% 28947 - +#18 Short offline Completed without error 00% 28779 - +#19 Extended offline Completed without error 00% 28706 - +#20 Short offline Completed without error 00% 28610 - +#21 Short offline Completed without error 00% 28442 - +#22 Short offline Completed without error 00% 28274 - +#23 Short offline Completed without error 00% 28106 - +#24 Extended offline Completed without error 00% 27962 - +#25 Short offline Completed without error 00% 27938 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 25/34 Celsius +Lifetime Min/Max Temperature: 21/38 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (11) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x018 6 54148129410 --- Logical Sectors Written +0x01 0x020 6 2516702216 --- Number of Write Commands +0x01 0x028 6 8900269856 --- Logical Sectors Read +0x01 0x030 6 3203127 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 95 --- Number of Hardware Resets +0x06 0x010 4 70 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G6K/31250880601E b/SSD/Intel/SSDSC2/SSDSC2BB120G6K/31250880601E new file mode 100644 index 000000000..fca6d5a79 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G6K/31250880601E @@ -0,0 +1,216 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2BB120G6K +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: G201CS01 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 4 22:59:19 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13569 + 12 Power_Cycle_Count -O--CK 100 100 000 - 395 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 236 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 176533804222 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 066 000 - 34 (Min/Max 21/34) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 236 +194 Temperature_Celsius -O---K 100 100 000 - 34 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 150476 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 2150 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 72 +228 Power-off_Retract_Count -O--CK 100 100 000 - 812684 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +234 Unknown_Attribute -O--CK 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 150476 +242 Total_LBAs_Read -O--CK 100 100 000 - 383441 +243 Unknown_Attribute -O--CK 100 100 000 - 285297 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3565 - +# 2 Short offline Completed without error 00% 40 - +# 3 Extended offline Completed without error 00% 23 - +# 4 Short offline Completed without error 00% 2 - +# 5 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 10/50 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (204) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 395 --- Lifetime Power-On Resets +0x01 0x018 6 9861642103 --- Logical Sectors Written +0x01 0x020 6 322914611 --- Number of Write Commands +0x01 0x028 6 25129236883 --- Logical Sectors Read +0x01 0x030 6 199325403 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 42 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2545 --- Number of Hardware Resets +0x06 0x010 4 1434 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB150G7/EDBE36853CC5 b/SSD/Intel/SSDSC2/SSDSC2BB150G7/EDBE36853CC5 new file mode 100644 index 000000000..9355979ab --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB150G7/EDBE36853CC5 @@ -0,0 +1,214 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB150G7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: N2010112 +User Capacity: 150,039,945,216 bytes [150 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 27 20:55:01 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 65520 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 13460 (408 1474) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 058 058 000 - 42 (Min/Max 38/45) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Internal -O---K 100 100 000 - 42 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 672077 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4034 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 1 +228 Workload_Minutes -O--CK 100 100 000 - 3931137 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 097 097 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 672077 +242 Host_Reads_32MiB -O--CK 100 100 000 - 9449 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 1148939 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x98 GPL,SL R/W 16 Host vendor specific log +0x9b-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1704 Device vendor specific log +0xb9 SL VS 168 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 38/45 Celsius +Lifetime Min/Max Temperature: 17/54 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (451) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x018 6 44045254302 --- Logical Sectors Written +0x01 0x020 6 616475640 --- Number of Write Commands +0x01 0x028 6 619270470 --- Logical Sectors Read +0x01 0x030 6 12461408 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 41 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 47 --- Highest Average Long Term Temperature +0x05 0x048 1 33 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 978 --- Number of Hardware Resets +0x06 0x010 4 759 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 60 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB160G4/27A0771B32C0 b/SSD/Intel/SSDSC2/SSDSC2BB160G4/27A0771B32C0 new file mode 100644 index 000000000..444e683af --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB160G4/27A0771B32C0 @@ -0,0 +1,213 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB160G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Apr 10 20:39:46 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 58774 + 12 Power_Cycle_Count -O--CK 100 100 000 - 64 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 33 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 646 (348 73) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 078 078 000 - 22 (Min/Max 18/22) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 33 +194 Temperature_Internal -O---K 100 100 000 - 29 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1474812 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 17162 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 33 +228 Workload_Minutes -O--CK 100 100 000 - 3526065 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 084 084 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1474812 +242 Host_Reads_32MiB -O--CK 100 100 000 - 745791 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 5 - +# 2 Short offline Completed without error 00% 4 - +# 3 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 18/22 Celsius +Lifetime Min/Max Temperature: 12/45 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (379) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x018 6 96653337016 --- Logical Sectors Written +0x01 0x020 6 944673614 --- Number of Write Commands +0x01 0x028 6 48876162973 --- Logical Sectors Read +0x01 0x030 6 2784968684 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 21 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 20 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 733 --- Number of Hardware Resets +0x06 0x010 4 204 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB300H4/FD6A1203E029 b/SSD/Intel/SSDSC2/SSDSC2BB300H4/FD6A1203E029 new file mode 100644 index 000000000..0e1ef3b2c --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB300H4/FD6A1203E029 @@ -0,0 +1,213 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB300H4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010380 +User Capacity: 300,069,052,416 bytes [300 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Nov 22 15:46:16 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1862 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1019 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 259 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 642 (1 61) +183 SATA_Downshift_Count -O--CK 100 100 000 - 22 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 079 079 000 - 21 (Min/Max 17/21) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 259 +194 Temperature_Internal -O---K 100 100 000 - 30 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 135036 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 295 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 39 +228 Workload_Minutes -O--CK 100 100 000 - 99894 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 135036 +242 Host_Reads_32MiB -O--CK 100 100 000 - 89027 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 768 Device vendor specific log +0xba GPL VS 1152 Device vendor specific log +0xba SL VS 128 Device vendor specific log +0xcf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1516 - +# 2 Short offline Completed without error 00% 1516 - +# 3 Offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 21 Celsius +Power Cycle Min/Max Temperature: 17/21 Celsius +Lifetime Min/Max Temperature: 6/40 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (388) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1019 --- Lifetime Power-On Resets +0x01 0x018 6 8849725875 --- Logical Sectors Written +0x01 0x020 6 47181017 --- Number of Write Commands +0x01 0x028 6 5834483804 --- Logical Sectors Read +0x01 0x030 6 71450290 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 21 --- Current Temperature +0x05 0x010 1 21 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 29 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3433 --- Number of Hardware Resets +0x06 0x010 4 2436 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 36 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB480G4/238AB8F8CF17 b/SSD/Intel/SSDSC2/SSDSC2BB480G4/238AB8F8CF17 new file mode 100644 index 000000000..ec6f6642f --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB480G4/238AB8F8CF17 @@ -0,0 +1,387 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB480G4 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: D2010311 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 2 13:49:10 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 095 095 000 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 78858 + 12 Power_Cycle_Count -O--CK 100 100 000 - 400 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 2 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 337 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 632 (419 5077) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 070 070 000 - 30 (Min/Max 21/34) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 337 +194 Temperature_Internal -O---K 100 100 000 - 30 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 40 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3469338 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 4294967295 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 080 080 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3469338 +242 Host_Reads_32MiB -O--CK 100 100 000 - 8670579 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 23 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 23 [22] occurred at disk power-on lifetime: 10110 hours (421 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 01 00 00 00 00 00 10 00 00 Error: UNC + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 10 00 00 5d+16:48:45.689 READ LOG EXT + 60 00 00 01 00 00 00 16 f8 f5 00 40 00 5d+16:48:45.687 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f4 00 40 00 5d+16:48:45.687 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f3 00 40 00 5d+16:48:45.686 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f2 00 40 00 5d+16:48:45.685 READ FPDMA QUEUED + +Error 22 [21] occurred at disk power-on lifetime: 10110 hours (421 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 01 00 00 00 16 f8 f5 00 40 00 Error: ICRC, ABRT at LBA = 0x16f8f500 = 385414400 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 16 f8 f5 00 40 00 5d+16:48:45.687 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f4 00 40 00 5d+16:48:45.687 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f3 00 40 00 5d+16:48:45.686 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f2 00 40 00 5d+16:48:45.685 READ FPDMA QUEUED + 60 00 00 01 00 00 00 16 f8 f1 00 40 00 5d+16:48:45.684 READ FPDMA QUEUED + +Error 21 [20] occurred at disk power-on lifetime: 4948 hours (206 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 08 00 00 02 30 ff 20 40 00 Error: ABRT at LBA = 0x0230ff20 = 36765472 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 02 30 ff 20 40 00 00:06:30.557 READ FPDMA QUEUED + 60 00 00 00 08 00 00 02 30 fc 90 40 00 00:06:30.557 READ FPDMA QUEUED + 60 00 00 00 08 00 00 02 30 fa e0 40 00 00:06:30.557 READ FPDMA QUEUED + 60 00 00 00 08 00 00 02 30 f9 90 40 00 00:06:30.557 READ FPDMA QUEUED + 60 00 00 00 08 00 00 02 30 f7 48 40 00 00:06:30.557 READ FPDMA QUEUED + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 20 [19] occurred at disk power-on lifetime: 1513 hours (63 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 01 00 00 00 00 00 10 00 00 Error: UNC + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:51:53.231 READ LOG EXT + 61 00 00 00 80 00 00 05 9a dd 1c 40 00 01:51:53.229 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 05 9a dc 9c 40 00 01:51:53.228 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 18 40 00 01:51:53.222 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 07 75 e8 40 00 01:51:53.222 WRITE FPDMA QUEUED + +Error 19 [18] occurred at disk power-on lifetime: 1513 hours (63 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 80 00 00 05 9a dd 1c 40 00 Error: ICRC, ABRT at LBA = 0x059add1c = 94035228 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 80 00 00 05 9a dd 1c 40 00 01:51:53.229 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 05 9a dc 9c 40 00 01:51:53.228 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 18 40 00 01:51:53.222 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 07 75 e8 40 00 01:51:53.222 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 08 40 00 01:51:53.222 WRITE FPDMA QUEUED + +Error 18 [17] occurred at disk power-on lifetime: 1513 hours (63 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 01 00 00 00 00 00 10 00 00 Error: UNC + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:41:49.289 READ LOG EXT + 61 00 00 00 80 00 00 05 97 b1 44 40 00 01:41:49.286 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 05 97 b0 c4 40 00 01:41:49.284 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 10 40 00 01:41:49.278 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 07 73 d8 40 00 01:41:49.278 WRITE FPDMA QUEUED + +Error 17 [16] occurred at disk power-on lifetime: 1513 hours (63 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 80 00 00 05 97 b1 44 40 00 Error: ICRC, ABRT at LBA = 0x0597b144 = 93827396 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 80 00 00 05 97 b1 44 40 00 01:41:49.286 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 05 97 b0 c4 40 00 01:41:49.284 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 10 40 00 01:41:49.278 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 07 73 d8 40 00 01:41:49.278 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 00 40 00 01:41:49.278 WRITE FPDMA QUEUED + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 16 [15] occurred at disk power-on lifetime: 1513 hours (63 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + c0 -- 01 00 01 00 00 00 00 00 10 00 00 Error: UNC + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:32:18.123 READ LOG EXT + 61 00 00 00 80 00 00 05 95 d0 88 40 00 01:32:18.120 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 05 95 d0 08 40 00 01:32:18.120 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 00 25 08 40 00 01:32:18.115 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 07 76 48 40 00 01:32:18.115 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12018 - +# 2 Short offline Completed without error 00% 12010 - +# 3 Short offline Completed without error 00% 12009 - +# 4 Short offline Completed without error 00% 12008 - +# 5 Short offline Completed without error 00% 12008 - +# 6 Short offline Completed without error 00% 12007 - +# 7 Short offline Completed without error 00% 12006 - +# 8 Short offline Completed without error 00% 12006 - +# 9 Short offline Completed without error 00% 12005 - +#10 Short offline Completed without error 00% 12005 - +#11 Short offline Completed without error 00% 12004 - +#12 Short offline Completed without error 00% 12003 - +#13 Short offline Completed without error 00% 12002 - +#14 Short offline Completed without error 00% 12001 - +#15 Short offline Completed without error 00% 12000 - +#16 Short offline Completed without error 00% 11999 - +#17 Short offline Completed without error 00% 11998 - +#18 Short offline Completed without error 00% 11998 - +#19 Short offline Completed without error 00% 11997 - +#20 Short offline Completed without error 00% 11996 - +#21 Short offline Completed without error 00% 11995 - +#22 Short offline Completed without error 00% 11994 - +#23 Short offline Completed without error 00% 11993 - +#24 Short offline Completed without error 00% 11992 - +#25 Short offline Completed without error 00% 11992 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 5/57 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (321) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 400 --- Lifetime Power-On Resets +0x01 0x018 6 227366582361 --- Logical Sectors Written +0x01 0x020 6 2561186 --- Number of Write Commands +0x01 0x028 6 568235078221 --- Logical Sectors Read +0x01 0x030 6 54562 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7432 --- Number of Hardware Resets +0x06 0x010 4 2373 --- Number of ASR Events +0x06 0x018 4 40 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB480G4/CC6BDF5D7104 b/SSD/Intel/SSDSC2/SSDSC2BB480G4/CC6BDF5D7104 new file mode 100644 index 000000000..a4d286157 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB480G4/CC6BDF5D7104 @@ -0,0 +1,209 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB480G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 18 15:39:18 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7744 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 10 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 654 (44 8794) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 066 066 000 - 34 (Min/Max 28/37) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 10 +194 Temperature_Internal -O---K 100 100 000 - 45 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 73461 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 645 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 464662 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 73461 +242 Host_Reads_32MiB -O--CK 100 100 000 - 320 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 28/37 Celsius +Lifetime Min/Max Temperature: 12/39 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (84) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 4814359416 --- Logical Sectors Written +0x01 0x020 6 3133429647 --- Number of Write Commands +0x01 0x028 6 21031710 --- Logical Sectors Read +0x01 0x030 6 801050609 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 536 --- Number of Hardware Resets +0x06 0x010 4 407 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB480G4/FDCC626F1B2D b/SSD/Intel/SSDSC2/SSDSC2BB480G4/FDCC626F1B2D new file mode 100644 index 000000000..bb0cd7926 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB480G4/FDCC626F1B2D @@ -0,0 +1,211 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB480G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 18 15:39:18 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7744 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 10 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 643 (44 8794) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 067 067 000 - 33 (Min/Max 27/36) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 10 +194 Temperature_Internal -O---K 100 100 000 - 44 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 73462 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 645 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 464670 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 73462 +242 Host_Reads_32MiB -O--CK 100 100 000 - 360 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 27/36 Celsius +Lifetime Min/Max Temperature: 12/38 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (91) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 4814463483 --- Logical Sectors Written +0x01 0x020 6 1410446440 --- Number of Write Commands +0x01 0x028 6 23618770 --- Logical Sectors Read +0x01 0x030 6 406207841 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 613 --- Number of Hardware Resets +0x06 0x010 4 442 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB480G6/BF84C1561EE8 b/SSD/Intel/SSDSC2/SSDSC2BB480G6/BF84C1561EE8 new file mode 100644 index 000000000..e971d803e --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB480G6/BF84C1561EE8 @@ -0,0 +1,392 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB480G6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: G2010150 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 2 13:49:09 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12784 + 12 Power_Cycle_Count -O--CK 100 100 000 - 394 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 330 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 5570 (36 9137) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 061 061 000 - 39 (Min/Max 34/43) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 330 +194 Temperature_Internal -O---K 100 100 000 - 39 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 702 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1354293 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 5765 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 55 +228 Workload_Minutes -O--CK 100 100 000 - 765129 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1354293 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1668110 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 2847452 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 92 (device log contains only the most recent 80 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 92 [11] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 32 00 98 00 00 40 00 Error: ICRC, ABRT at LBA = 0x3200980000 = 214758326272 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 32 00 98 00 00 40 00 19:11:24.286 WRITE FPDMA QUEUED + 61 00 00 00 10 00 0f 00 b1 00 d0 40 00 19:11:24.284 WRITE FPDMA QUEUED + 61 00 00 08 00 00 32 00 98 00 00 40 00 19:11:24.284 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 94 00 00 40 00 19:11:24.280 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 90 00 00 40 00 19:11:24.278 WRITE FPDMA QUEUED + +Error 91 [10] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 32 00 8c 00 00 40 00 Error: ICRC, ABRT at LBA = 0x32008c0000 = 214757539840 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 32 00 8c 00 00 40 00 19:11:24.177 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 88 00 00 40 00 19:11:24.176 WRITE FPDMA QUEUED + 61 00 00 00 10 00 0f 00 b1 00 b0 40 00 19:11:24.174 WRITE FPDMA QUEUED + 61 00 00 08 00 00 32 00 88 00 00 40 00 19:11:24.174 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 84 00 00 40 00 19:11:24.169 WRITE FPDMA QUEUED + +Error 90 [9] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 32 00 46 00 80 40 00 Error: ICRC, ABRT at LBA = 0x3200460080 = 214752952448 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 32 00 46 00 80 40 00 19:11:24.052 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 42 00 80 40 00 19:11:23.975 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 a0 00 19:11:23.958 READ LOG EXT + 61 00 00 04 00 00 32 00 46 00 80 40 00 19:11:23.948 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 42 00 80 40 00 19:11:23.871 WRITE FPDMA QUEUED + +Error 89 [8] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 32 00 46 00 80 40 00 Error: ICRC, ABRT at LBA = 0x3200460080 = 214752952448 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 32 00 46 00 80 40 00 19:11:23.948 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 42 00 80 40 00 19:11:23.871 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 a0 00 19:11:23.855 READ LOG EXT + 61 00 00 04 00 00 32 00 46 00 80 40 00 19:11:23.772 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 42 00 80 40 00 19:11:23.771 WRITE FPDMA QUEUED + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 88 [7] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 32 00 46 00 80 40 00 Error: ICRC, ABRT at LBA = 0x3200460080 = 214752952448 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 32 00 46 00 80 40 00 19:11:23.772 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 42 00 80 40 00 19:11:23.771 WRITE FPDMA QUEUED + 61 00 00 00 10 00 0f 00 b1 00 e0 40 00 19:11:23.769 WRITE FPDMA QUEUED + 61 00 00 08 00 00 32 00 48 00 00 40 00 19:11:23.769 WRITE FPDMA QUEUED + 61 00 00 04 00 00 32 00 3e 00 80 40 00 19:11:23.765 WRITE FPDMA QUEUED + +Error 87 [6] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 31 00 c1 00 80 40 00 Error: ICRC, ABRT at LBA = 0x3100c10080 = 210466046080 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 31 00 c1 00 80 40 00 19:06:27.700 WRITE FPDMA QUEUED + 61 00 00 00 08 00 05 00 22 00 00 40 00 19:06:27.700 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 d9 00 38 40 00 19:06:27.700 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 a0 00 19:06:27.685 READ LOG EXT + 61 00 00 04 00 00 31 00 c1 00 80 40 00 19:06:27.618 WRITE FPDMA QUEUED + +Error 86 [5] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 31 00 c1 00 80 40 00 Error: ICRC, ABRT at LBA = 0x3100c10080 = 210466046080 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 31 00 c1 00 80 40 00 19:06:27.618 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 c9 00 b8 40 00 19:06:27.618 WRITE FPDMA QUEUED + 61 00 00 00 08 00 05 00 22 00 00 40 00 19:06:27.618 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 d9 00 38 40 00 19:06:27.618 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 a0 00 19:06:27.587 READ LOG EXT + +Error 85 [4] occurred at disk power-on lifetime: 4220 hours (175 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 04 00 00 31 00 bd 00 80 40 00 Error: ICRC, ABRT at LBA = 0x3100bd0080 = 210465783936 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 31 00 bd 00 80 40 00 19:06:27.500 WRITE FPDMA QUEUED + 61 00 00 00 10 00 0f 00 b1 00 b8 40 00 19:06:27.499 WRITE FPDMA QUEUED + 61 00 00 08 00 00 31 00 c0 00 00 40 00 19:06:27.499 WRITE FPDMA QUEUED + 61 00 00 04 00 00 31 00 b9 00 80 40 00 19:06:27.495 WRITE FPDMA QUEUED + 61 00 00 04 00 00 31 00 b5 00 80 40 00 19:06:27.493 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 11473 - +# 2 Short offline Completed without error 00% 11465 - +# 3 Short offline Completed without error 00% 11464 - +# 4 Short offline Completed without error 00% 11463 - +# 5 Short offline Completed without error 00% 11463 - +# 6 Short offline Completed without error 00% 11462 - +# 7 Short offline Completed without error 00% 11461 - +# 8 Short offline Completed without error 00% 11461 - +# 9 Short offline Completed without error 00% 11460 - +#10 Short offline Completed without error 00% 11460 - +#11 Short offline Completed without error 00% 11459 - +#12 Short offline Completed without error 00% 11458 - +#13 Short offline Completed without error 00% 11457 - +#14 Short offline Completed without error 00% 11456 - +#15 Short offline Completed without error 00% 11455 - +#16 Short offline Completed without error 00% 11454 - +#17 Short offline Completed without error 00% 11453 - +#18 Short offline Completed without error 00% 11453 - +#19 Short offline Completed without error 00% 11452 - +#20 Short offline Completed without error 00% 11451 - +#21 Short offline Completed without error 00% 11450 - +#22 Short offline Completed without error 00% 11449 - +#23 Short offline Completed without error 00% 11448 - +#24 Short offline Completed without error 00% 11447 - +#25 Short offline Completed without error 00% 11447 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 34/43 Celsius +Lifetime Min/Max Temperature: 19/53 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (205) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 394 --- Lifetime Power-On Resets +0x01 0x018 6 88754966332 --- Logical Sectors Written +0x01 0x020 6 3181835526 --- Number of Write Commands +0x01 0x028 6 109321259995 --- Logical Sectors Read +0x01 0x030 6 2561895368 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 91 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 18012 --- Number of Hardware Resets +0x06 0x010 4 2218 --- Number of ASR Events +0x06 0x018 4 702 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB480G6R/7F6952FE611B b/SSD/Intel/SSDSC2/SSDSC2BB480G6R/7F6952FE611B new file mode 100644 index 000000000..ed43450c7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB480G6R/7F6952FE611B @@ -0,0 +1,210 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB480G6R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: G201DL2B +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 13 20:31:01 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 13197305 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 55837 + 12 Power_Cycle_Count -O--CK 100 100 000 - 49 + 13 Read_Soft_Error_Rate -OSRC- 103 100 000 - 618488487929 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 7225 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 16 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 1400447244214 +202 Unknown_SSD_Attribute POS--K 100 100 000 - 0 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 102400 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 3786616533 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 2079588 +245 Unknown_Attribute -O--CK 092 092 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 16 Celsius +Power Cycle Min/Max Temperature: 14/21 Celsius +Lifetime Min/Max Temperature: 14/41 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (44) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x018 6 136287883433 --- Logical Sectors Written +0x01 0x020 6 2351265381 --- Number of Write Commands +0x01 0x028 6 843655530256 --- Logical Sectors Read +0x01 0x030 6 13731333360 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 16 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 20 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 20 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 228 --- Number of Hardware Resets +0x06 0x010 4 205 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB480G7/FF67573CDDAE b/SSD/Intel/SSDSC2/SSDSC2BB480G7/FF67573CDDAE new file mode 100644 index 000000000..f06a29a85 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB480G7/FF67573CDDAE @@ -0,0 +1,212 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB480G7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: N2010112 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Nov 27 15:52:23 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10149 + 12 Power_Cycle_Count -O--CK 100 100 000 - 38 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 12 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 16130 (92 169) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 074 073 000 - 26 (Min/Max 19/27) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 12 +194 Temperature_Internal -O---K 100 100 000 - 26 +197 Current_Pending_Sector -O--C- 100 100 000 - 1 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 258883 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 102400 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 361264036 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 258883 +242 Host_Reads_32MiB -O--CK 100 100 000 - 123749 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 702132 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x98 GPL,SL R/W 16 Host vendor specific log +0x9b-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1704 Device vendor specific log +0xb9 SL VS 168 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4090 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 19/27 Celsius +Lifetime Min/Max Temperature: 11/39 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (8) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x018 6 16966187076 --- Logical Sectors Written +0x01 0x020 6 240628308 --- Number of Write Commands +0x01 0x028 6 8110020077 --- Logical Sectors Read +0x01 0x030 6 53317475 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 22 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 20 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 88 --- Number of Hardware Resets +0x06 0x010 4 57 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB800G4/2D3C04F9CB23 b/SSD/Intel/SSDSC2/SSDSC2BB800G4/2D3C04F9CB23 new file mode 100644 index 000000000..b60d20de6 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB800G4/2D3C04F9CB23 @@ -0,0 +1,214 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB800G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 5 06:48:42 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 63913 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 40 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 634 (373 4395) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 085 084 000 - 15 (Min/Max 14/18) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 40 +194 Temperature_Internal -O---K 100 100 000 - 26 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 860270 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4024 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 63 +228 Workload_Minutes -O--CK 100 100 000 - 3834567 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 097 097 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 860270 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1512764 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 60449 - +# 2 Extended offline Completed without error 00% 56232 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 14/18 Celsius +Lifetime Min/Max Temperature: 8/31 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (334) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x018 6 56378668254 --- Logical Sectors Written +0x01 0x020 6 1978634549 --- Number of Write Commands +0x01 0x028 6 99140527491 --- Logical Sectors Read +0x01 0x030 6 538431644 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 15 --- Current Temperature +0x05 0x010 1 14 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 30 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 12 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 12 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 429 --- Number of Hardware Resets +0x06 0x010 4 156 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB800G4/810F154BC4D4 b/SSD/Intel/SSDSC2/SSDSC2BB800G4/810F154BC4D4 new file mode 100644 index 000000000..7afa68585 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB800G4/810F154BC4D4 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB800G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 5 06:48:42 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 35326 + 12 Power_Cycle_Count -O--CK 100 100 000 - 89 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 85 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 638 (203 4395) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 085 085 000 - 15 (Min/Max 15/18) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 85 +194 Temperature_Internal -O---K 100 100 000 - 26 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 37308303 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 50616 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 49 +228 Workload_Minutes -O--CK 100 100 000 - 2119117 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 051 051 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 37308303 +242 Host_Reads_32MiB -O--CK 100 100 000 - 36154573 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 15/18 Celsius +Lifetime Min/Max Temperature: 3/52 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 55 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (300) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 89 --- Lifetime Power-On Resets +0x01 0x018 6 2445036958103 --- Logical Sectors Written +0x01 0x020 6 19229568565 --- Number of Write Commands +0x01 0x028 6 2369426153643 --- Logical Sectors Read +0x01 0x030 6 83469868220 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 15 --- Current Temperature +0x05 0x010 1 15 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 10 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 271 --- Number of Hardware Resets +0x06 0x010 4 265 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 49 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB800G4/9961CCF81D30 b/SSD/Intel/SSDSC2/SSDSC2BB800G4/9961CCF81D30 new file mode 100644 index 000000000..ded37339a --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB800G4/9961CCF81D30 @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB800G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 5 06:48:42 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27402 + 12 Power_Cycle_Count -O--CK 100 100 000 - 115 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 108 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 641 (158 4395) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 085 085 000 - 15 (Min/Max 15/18) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 108 +194 Temperature_Internal -O---K 100 100 000 - 26 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 38302516 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 52346 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 48 +228 Workload_Minutes -O--CK 100 100 000 - 1643218 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 049 049 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 38302516 +242 Host_Reads_32MiB -O--CK 100 100 000 - 35601653 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 15/18 Celsius +Lifetime Min/Max Temperature: 3/39 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (453) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 115 --- Lifetime Power-On Resets +0x01 0x018 6 2510193714667 --- Logical Sectors Written +0x01 0x020 6 19839092619 --- Number of Write Commands +0x01 0x028 6 2333189989733 --- Logical Sectors Read +0x01 0x030 6 88722518310 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 15 --- Current Temperature +0x05 0x010 1 15 --- Average Short Term Temperature +0x05 0x018 1 15 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 8 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 22 --- Highest Average Long Term Temperature +0x05 0x048 1 14 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 165 --- Number of Hardware Resets +0x06 0x010 4 159 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 51 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB800G4/BB4AE60420BE b/SSD/Intel/SSDSC2/SSDSC2BB800G4/BB4AE60420BE new file mode 100644 index 000000000..90acb8360 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB800G4/BB4AE60420BE @@ -0,0 +1,213 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB800G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 5 06:48:42 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 44234 + 12 Power_Cycle_Count -O--CK 100 100 000 - 19 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 16 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 641 (260 4396) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 085 084 000 - 15 (Min/Max 15/19) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 16 +194 Temperature_Internal -O---K 100 100 000 - 26 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 107852 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 3133 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 33 +228 Workload_Minutes -O--CK 100 100 000 - 2654009 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 097 097 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 107852 +242 Host_Reads_32MiB -O--CK 100 100 000 - 55042 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 43954 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 15/19 Celsius +Lifetime Min/Max Temperature: 8/35 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (281) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x018 6 7068240039 --- Logical Sectors Written +0x01 0x020 6 278123327 --- Number of Write Commands +0x01 0x028 6 3607269616 --- Logical Sectors Read +0x01 0x030 6 27230097 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 15 --- Current Temperature +0x05 0x010 1 15 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 20 --- Highest Average Short Term Temperature +0x05 0x038 1 13 --- Lowest Average Short Term Temperature +0x05 0x040 1 18 --- Highest Average Long Term Temperature +0x05 0x048 1 13 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 153 --- Number of Hardware Resets +0x06 0x010 4 81 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB800G4/BE3877F62C6E b/SSD/Intel/SSDSC2/SSDSC2BB800G4/BE3877F62C6E new file mode 100644 index 000000000..a9e0b2871 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB800G4/BE3877F62C6E @@ -0,0 +1,212 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB800G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010370 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 5 06:48:41 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 57396 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 19 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 648 (336 4396) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 085 084 000 - 15 (Min/Max 15/19) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 19 +194 Temperature_Internal -O---K 100 100 000 - 26 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3334326 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 9113 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 76 +228 Workload_Minutes -O--CK 100 100 000 - 3443745 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 092 092 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3334326 +242 Host_Reads_32MiB -O--CK 100 100 000 - 10569298 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xdd GPL,SL VS 1 Device vendor specific log +0xde GPL VS 768 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 15/19 Celsius +Lifetime Min/Max Temperature: 7/39 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 63 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (341) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x018 6 218518443157 --- Logical Sectors Written +0x01 0x020 6 2557028330 --- Number of Write Commands +0x01 0x028 6 692669534969 --- Logical Sectors Read +0x01 0x030 6 2216581884 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 15 --- Current Temperature +0x05 0x010 1 15 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 9 --- Lowest Average Short Term Temperature +0x05 0x040 1 23 --- Highest Average Long Term Temperature +0x05 0x048 1 11 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 37 --- Number of Hardware Resets +0x06 0x010 4 30 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB800G4/CD5C747835C4 b/SSD/Intel/SSDSC2/SSDSC2BB800G4/CD5C747835C4 new file mode 100644 index 000000000..cf451eafc --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB800G4/CD5C747835C4 @@ -0,0 +1,362 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB800G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010355 +User Capacity: 800,166,076,416 bytes [800 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 5 06:48:42 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 097 097 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 56900 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 16 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 619 (335 4395) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 085 084 000 - 15 (Min/Max 15/19) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 16 +194 Temperature_Internal -O---K 100 100 000 - 15 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 1 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2414561 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 31 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 4395 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 091 091 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2414561 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1468069 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 28 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 28 [27] occurred at disk power-on lifetime: 56825 hours (2367 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 08 00 00 16 a2 c2 f0 40 00 Error: ICRC, ABRT at LBA = 0x16a2c2f0 = 379765488 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 08 00 00 16 a2 c2 f0 40 00 3d+11:13:30.701 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 16 6c 21 28 40 00 3d+11:13:30.701 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 16 a2 c2 e8 40 00 3d+11:13:30.701 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 16 6c 21 20 40 00 3d+11:13:30.701 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 15 c1 6c 88 40 00 3d+11:13:30.701 WRITE FPDMA QUEUED + +Error 27 [26] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:56.482 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:11:53.497 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:11:53.497 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 00:11:53.497 SET FEATURES [Set transfer mode] + ef 00 03 00 0c 00 00 00 00 00 00 00 00 00:11:53.497 SET FEATURES [Set transfer mode] + +Error 26 [25] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:50.524 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:31.331 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Set transfer mode] + +Error 25 [24] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:31.331 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Set transfer mode] + ef 00 03 00 0c 00 00 00 00 00 00 00 00 00:11:31.082 SET FEATURES [Set transfer mode] + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 24 [23] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:28.111 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:08.917 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Set transfer mode] + +Error 23 [22] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:08.917 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Set transfer mode] + ef 00 03 00 0c 00 00 00 00 00 00 00 00 00:11:08.669 SET FEATURES [Set transfer mode] + +Error 22 [21] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:05.686 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:02.713 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:10:43.518 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:10:43.269 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:10:43.269 SET FEATURES [Enable read look-ahead] + +Error 21 [20] occurred at disk power-on lifetime: 56496 hours (2354 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 12 -- 01 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:11:02.713 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:10:43.518 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:10:43.269 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:10:43.269 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 00:10:43.269 SET FEATURES [Set transfer mode] + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 56536 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 15/19 Celsius +Lifetime Min/Max Temperature: 6/30 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (241) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x018 6 158240729309 --- Logical Sectors Written +0x01 0x020 6 2806545 --- Number of Write Commands +0x01 0x028 6 96211402733 --- Logical Sectors Read +0x01 0x030 6 17719 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 15 --- Current Temperature +0x05 0x010 1 15 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 29 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 22 --- Highest Average Short Term Temperature +0x05 0x038 1 11 --- Lowest Average Short Term Temperature +0x05 0x040 1 21 --- Highest Average Long Term Temperature +0x05 0x048 1 12 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 511 --- Number of Hardware Resets +0x06 0x010 4 64 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF180A4H/206680904C21 b/SSD/Intel/SSDSC2/SSDSC2BF180A4H/206680904C21 new file mode 100644 index 000000000..65a989d30 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF180A4H/206680904C21 @@ -0,0 +1,202 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BF180A4H +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LH6i +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 29 16:19:32 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x77) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 49432h+37m+11.310s + 12 Power_Cycle_Count -O--CK 100 100 000 - 361 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 361 +183 SATA_Downshift_Count -O--CK 100 100 010 - 10 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 028 044 000 - 28 (Min/Max 18/44) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 361 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 147355 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 80 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 147355 +242 Host_Reads_32MiB -O--CK 100 100 000 - 598139 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 17385 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 49432 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 18/44 Celsius +Lifetime Min/Max Temperature: 18/90 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (330) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 366 --- Lifetime Power-On Resets +0x01 0x010 4 49432 --- Power-on Hours +0x01 0x018 6 9675415235 --- Logical Sectors Written +0x01 0x028 6 39216470936 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1619 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1619 --- Number of Hardware Resets +0x06 0x010 4 314 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF180A4H/FC481640EAAB b/SSD/Intel/SSDSC2/SSDSC2BF180A4H/FC481640EAAB new file mode 100644 index 000000000..663c3450b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF180A4H/FC481640EAAB @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BF180A4H +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LH6i +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jan 4 23:54:11 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x77) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 980h+02m+52.370s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2190 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2190 +183 SATA_Downshift_Count -O--CK 100 100 010 - 10 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 023 049 000 - 23 (Min/Max 8/49) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2190 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 79053 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 73 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 79053 +242 Host_Reads_32MiB -O--CK 100 100 000 - 221378 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 9926 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 980 - +# 2 Short offline Aborted by host 70% 912 - +# 3 Short offline Completed without error 00% 912 - +# 4 Short offline Aborted by host 90% 912 - +# 5 Short offline Aborted by host 90% 912 - +# 6 Short offline Aborted by host 90% 912 - +# 7 Short offline Aborted by host 40% 912 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 8/49 Celsius +Lifetime Min/Max Temperature: 8/65 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (42) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2197 --- Lifetime Power-On Resets +0x01 0x010 4 980 --- Power-on Hours +0x01 0x018 6 5373688007 --- Logical Sectors Written +0x01 0x028 6 14689386480 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3884 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3884 --- Number of Hardware Resets +0x06 0x010 4 2112 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF240A4L/A00B2EEB9469 b/SSD/Intel/SSDSC2/SSDSC2BF240A4L/A00B2EEB9469 new file mode 100644 index 000000000..b108e48e1 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF240A4L/A00B2EEB9469 @@ -0,0 +1,218 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2BF240A4L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LADi +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 13 19:59:09 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9709 (28 106 0) + 12 Power_Cycle_Count -O--CK 097 097 000 - 3133 +170 Unknown_Attribute PO--CK 067 067 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 33 +183 Runtime_Bad_Block -O--CK 100 100 000 - 10 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 037 058 000 - 37 (Min/Max 13/58) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 33 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 1755850 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 29 +228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 067 067 010 - 0 +233 Media_Wearout_Indicator -O--CK 060 060 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1755850 +242 Total_LBAs_Read -O--CK 100 100 000 - 731456 +249 Unknown_Attribute -O--CK 100 100 000 - 289631 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 9708 - +# 2 Offline Interrupted (host reset) 10% 9708 - +# 3 Offline Interrupted (host reset) 10% 9706 - +# 4 Offline Interrupted (host reset) 10% 9654 - +# 5 Offline Interrupted (host reset) 10% 9654 - +# 6 Offline Interrupted (host reset) 10% 9654 - +# 7 Offline Interrupted (host reset) 10% 9654 - +# 8 Offline Interrupted (host reset) 10% 9654 - +# 9 Offline Interrupted (host reset) 10% 9654 - +#10 Short offline Completed without error 00% 9654 - +#11 Offline Interrupted (host reset) 10% 9652 - +#12 Offline Interrupted (host reset) 10% 9651 - +#13 Offline Interrupted (host reset) 10% 9651 - +#14 Offline Interrupted (host reset) 10% 9651 - +#15 Offline Interrupted (host reset) 10% 9650 - +#16 Offline Interrupted (host reset) 10% 9645 - +#17 Offline Interrupted (host reset) 10% 9633 - +#18 Offline Interrupted (host reset) 10% 9632 - +#19 Offline Interrupted (host reset) 10% 9632 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 13/58 Celsius +Lifetime Min/Max Temperature: 13/73 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (204) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3142 --- Lifetime Power-On Resets +0x01 0x010 4 9719 --- Power-on Hours +0x01 0x018 6 116600046889 --- Logical Sectors Written +0x01 0x028 6 49829352393 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10713 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10713 --- Number of Hardware Resets +0x06 0x010 4 3419 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 30 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 34 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/0C14920C35A6 b/SSD/Intel/SSDSC2/SSDSC2BW120A4/0C14920C35A6 new file mode 100644 index 000000000..8c5e641c7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/0C14920C35A6 @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 07:36:58 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 4583h+55m+05.930s + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 025 050 000 - 25 (Min/Max 15/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 474371 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 44 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 089 089 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 474371 +242 Host_Reads_32MiB -O--CK 100 100 000 - 377364 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 67722 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 4583 - +# 2 Offline Interrupted (host reset) 10% 4583 - +# 3 Offline Interrupted (host reset) 10% 4583 - +# 4 Offline Interrupted (host reset) 10% 4583 - +# 5 Offline Interrupted (host reset) 10% 4583 - +# 6 Offline Interrupted (host reset) 10% 4583 - +# 7 Offline Interrupted (host reset) 10% 4583 - +# 8 Offline Interrupted (host reset) 10% 4583 - +# 9 Offline Interrupted (host reset) 10% 4583 - +#10 Offline Interrupted (host reset) 10% 4583 - +#11 Offline Interrupted (host reset) 10% 4582 - +#12 Offline Interrupted (host reset) 10% 4180 - +#13 Offline Interrupted (host reset) 10% 2495 - +#14 Offline Interrupted (host reset) 10% 2094 - +#15 Offline Interrupted (host reset) 10% 2018 - +#16 Offline Interrupted (host reset) 10% 1804 - +#17 Offline Interrupted (host reset) 10% 1804 - +#18 Offline Interrupted (host reset) 10% 9 - +#19 Offline Interrupted (host reset) 10% 8 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 15/50 Celsius +Lifetime Min/Max Temperature: 15/66 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (50) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 4586 --- Power-on Hours +0x01 0x018 6 31106766419 --- Logical Sectors Written +0x01 0x028 6 24747693921 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 221 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 221 --- Number of Hardware Resets +0x06 0x010 4 8 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/2F6FBD7342D1 b/SSD/Intel/SSDSC2/SSDSC2BW120A4/2F6FBD7342D1 new file mode 100644 index 000000000..66c84ac1d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/2F6FBD7342D1 @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 12 10:57:12 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 2 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 58425h+36m+56.560s + 12 Power_Cycle_Count -O--CK 100 100 000 - 121 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 28 +183 SATA_Downshift_Count -O--CK 100 100 000 - 13 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 024 056 000 - 24 (Min/Max 11/56) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 28 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1230718 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 078 078 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1230718 +242 Host_Reads_32MiB -O--CK 100 100 000 - 2380313 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 72149 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 56626 - +# 2 Offline Interrupted (host reset) 10% 56545 - +# 3 Offline Interrupted (host reset) 10% 56534 - +# 4 Offline Interrupted (host reset) 10% 56530 - +# 5 Offline Interrupted (host reset) 10% 56482 - +# 6 Offline Interrupted (host reset) 10% 56482 - +# 7 Offline Interrupted (host reset) 10% 56482 - +# 8 Offline Interrupted (host reset) 10% 56481 - +# 9 Offline Interrupted (host reset) 10% 56481 - +#10 Offline Interrupted (host reset) 10% 56481 - +#11 Offline Interrupted (host reset) 10% 56477 - +#12 Offline Interrupted (host reset) 10% 56457 - +#13 Offline Interrupted (host reset) 10% 56457 - +#14 Offline Interrupted (host reset) 10% 56457 - +#15 Offline Interrupted (host reset) 10% 56449 - +#16 Offline Interrupted (host reset) 10% 56448 - +#17 Offline Interrupted (host reset) 10% 56448 - +#18 Offline Interrupted (host reset) 10% 56447 - +#19 Offline Interrupted (host reset) 10% 56447 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 11/56 Celsius +Lifetime Min/Max Temperature: 11/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (187) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 130 --- Lifetime Power-On Resets +0x01 0x010 4 58430 --- Power-on Hours +0x01 0x018 6 80849197216 --- Logical Sectors Written +0x01 0x028 6 156177264778 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1110 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 46 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 33 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1110 --- Number of Hardware Resets +0x06 0x010 4 483 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 41 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/5B9BE795459F b/SSD/Intel/SSDSC2/SSDSC2BW120A4/5B9BE795459F new file mode 100644 index 000000000..a689bce0d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/5B9BE795459F @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 19 00:05:38 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 12473h+01m+12.900s + 12 Power_Cycle_Count -O--CK 100 100 000 - 51 +170 Available_Reservd_Space PO--CK 064 064 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 22 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 019 050 000 - 19 (Min/Max 16/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 22 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1619631 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 20 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 064 064 010 - 0 +233 Media_Wearout_Indicator -O--CK 054 054 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1619631 +242 Host_Reads_32MiB -O--CK 100 100 000 - 429799 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 186535 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 12468 - +# 2 Offline Interrupted (host reset) 10% 12467 - +# 3 Offline Interrupted (host reset) 10% 12466 - +# 4 Offline Interrupted (host reset) 10% 12466 - +# 5 Offline Interrupted (host reset) 10% 12465 - +# 6 Offline Interrupted (host reset) 10% 12465 - +# 7 Offline Interrupted (host reset) 10% 12465 - +# 8 Offline Interrupted (host reset) 10% 12465 - +# 9 Offline Interrupted (host reset) 10% 12465 - +#10 Offline Interrupted (host reset) 10% 12465 - +#11 Offline Interrupted (host reset) 10% 12465 - +#12 Offline Interrupted (host reset) 10% 12465 - +#13 Offline Interrupted (host reset) 10% 12465 - +#14 Offline Interrupted (host reset) 10% 12465 - +#15 Offline Interrupted (host reset) 10% 12465 - +#16 Offline Interrupted (host reset) 10% 12465 - +#17 Offline Interrupted (host reset) 10% 12465 - +#18 Offline Interrupted (host reset) 10% 12465 - +#19 Offline Interrupted (host reset) 10% 12465 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 19 Celsius +Power Cycle Min/Max Temperature: 16/50 Celsius +Lifetime Min/Max Temperature: 16/64 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (328) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 57 --- Lifetime Power-On Resets +0x01 0x010 4 12475 --- Power-on Hours +0x01 0x018 6 106162526549 --- Logical Sectors Written +0x01 0x028 6 28184083422 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 396 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 19 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 396 --- Number of Hardware Resets +0x06 0x010 4 7 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 44 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/75E07BB38B5C b/SSD/Intel/SSDSC2/SSDSC2BW120A4/75E07BB38B5C new file mode 100644 index 000000000..0b84b4c19 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/75E07BB38B5C @@ -0,0 +1,221 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 30 14:33:19 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 19731h+27m+07.740s + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +170 Available_Reservd_Space PO--CK 001 001 010 NOW 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 46 +183 SATA_Downshift_Count -O--CK 100 100 000 - 10 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 040 050 000 - 40 (Min/Max 19/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 46 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2436891 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 30 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 001 001 010 NOW 0 +233 Media_Wearout_Indicator -O--CK 031 031 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2436891 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1081892 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 294637 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 18224 - +# 2 Offline Interrupted (host reset) 10% 17684 - +# 3 Offline Interrupted (host reset) 10% 15640 - +# 4 Offline Interrupted (host reset) 10% 15639 - +# 5 Offline Interrupted (host reset) 10% 15639 - +# 6 Offline Interrupted (host reset) 10% 15624 - +# 7 Offline Interrupted (host reset) 10% 15623 - +# 8 Offline Interrupted (host reset) 10% 15620 - +# 9 Offline Interrupted (host reset) 10% 15620 - +#10 Offline Interrupted (host reset) 10% 15620 - +#11 Offline Interrupted (host reset) 10% 15620 - +#12 Offline Interrupted (host reset) 10% 8060 - +#13 Offline Interrupted (host reset) 10% 6519 - +#14 Offline Interrupted (host reset) 10% 54 - +#15 Offline Interrupted (host reset) 10% 27 - +#16 Offline Interrupted (host reset) 10% 26 - +#17 Offline Interrupted (host reset) 10% 26 - +#18 Offline Interrupted (host reset) 10% 26 - +#19 Offline Interrupted (host reset) 10% 25 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 19/50 Celsius +Lifetime Min/Max Temperature: 19/75 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (194) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 19734 --- Power-on Hours +0x01 0x018 6 159896905574 --- Logical Sectors Written +0x01 0x028 6 71084025680 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 460 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 460 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 60 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 40 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/8D66C10E5A45 b/SSD/Intel/SSDSC2/SSDSC2BW120A4/8D66C10E5A45 new file mode 100644 index 000000000..bcdf9b149 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/8D66C10E5A45 @@ -0,0 +1,222 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Apr 25 15:35:53 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 9766h+25m+51.870s + 12 Power_Cycle_Count -O--CK 100 100 000 - 982 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 46 +183 SATA_Downshift_Count -O--CK 100 100 000 - 10 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 024 050 000 - 24 (Min/Max 17/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 46 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 102 +225 Host_Writes_32MiB -O--CK 100 100 000 - 337020 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 75 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 076 076 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 337020 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1041467 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 80182 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 9760 - +# 2 Offline Interrupted (host reset) 10% 9760 - +# 3 Offline Interrupted (host reset) 10% 9757 - +# 4 Offline Interrupted (host reset) 10% 9757 - +# 5 Offline Interrupted (host reset) 10% 9756 - +# 6 Offline Interrupted (host reset) 10% 9754 - +# 7 Offline Interrupted (host reset) 10% 9753 - +# 8 Offline Interrupted (host reset) 10% 9750 - +# 9 Offline Interrupted (host reset) 10% 9721 - +#10 Offline Interrupted (host reset) 10% 9702 - +#11 Offline Interrupted (host reset) 10% 9702 - +#12 Offline Interrupted (host reset) 10% 9701 - +#13 Offline Interrupted (host reset) 10% 9692 - +#14 Offline Interrupted (host reset) 10% 9670 - +#15 Offline Interrupted (host reset) 10% 9669 - +#16 Offline Interrupted (host reset) 10% 9668 - +#17 Offline Interrupted (host reset) 10% 9665 - +#18 Offline Interrupted (host reset) 10% 9662 - +#19 Offline Interrupted (host reset) 10% 9659 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 17/50 Celsius +Lifetime Min/Max Temperature: 17/76 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (346) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 989 --- Lifetime Power-On Resets +0x01 0x010 4 9770 --- Power-on Hours +0x01 0x018 6 22105347931 --- Logical Sectors Written +0x01 0x028 6 68270408550 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4412 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4412 --- Number of Hardware Resets +0x06 0x010 4 1010 --- Number of ASR Events +0x06 0x018 4 102 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 26 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/EEA0935F5C7A b/SSD/Intel/SSDSC2/SSDSC2BW120A4/EEA0935F5C7A new file mode 100644 index 000000000..0742c90e0 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/EEA0935F5C7A @@ -0,0 +1,221 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 30 11:00:01 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 12032h+48m+28.140s + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +170 Available_Reservd_Space PO--CK 082 082 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 20 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 031 050 000 - 31 (Min/Max 16/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 20 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1018235 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 28 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 082 082 010 - 0 +233 Media_Wearout_Indicator -O--CK 074 074 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1018235 +242 Host_Reads_32MiB -O--CK 100 100 000 - 397132 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 119566 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 10238 - +# 2 Offline Interrupted (host reset) 10% 10102 - +# 3 Offline Interrupted (host reset) 10% 10101 - +# 4 Offline Interrupted (host reset) 10% 9230 - +# 5 Offline Interrupted (host reset) 10% 8621 - +# 6 Offline Interrupted (host reset) 10% 6858 - +# 7 Offline Interrupted (host reset) 10% 6817 - +# 8 Offline Interrupted (host reset) 10% 6813 - +# 9 Offline Interrupted (host reset) 10% 6812 - +#10 Offline Interrupted (host reset) 10% 6811 - +#11 Offline Interrupted (host reset) 10% 6067 - +#12 Offline Interrupted (host reset) 10% 6066 - +#13 Offline Interrupted (host reset) 10% 6066 - +#14 Offline Interrupted (host reset) 10% 6065 - +#15 Offline Interrupted (host reset) 10% 6063 - +#16 Offline Interrupted (host reset) 10% 6063 - +#17 Offline Interrupted (host reset) 10% 6063 - +#18 Offline Interrupted (host reset) 10% 6063 - +#19 Offline Interrupted (host reset) 10% 6063 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 16/50 Celsius +Lifetime Min/Max Temperature: 16/64 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (259) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 12034 --- Power-on Hours +0x01 0x018 6 66749423214 --- Logical Sectors Written +0x01 0x028 6 26043232510 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 422 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 21 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 422 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 26 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A3H/288E24F7237D b/SSD/Intel/SSDSC2/SSDSC2BW180A3H/288E24F7237D new file mode 100644 index 000000000..dd5b89379 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A3H/288E24F7237D @@ -0,0 +1,193 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2BW180A3H +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: LCSi +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 17 19:03:34 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x77) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7626 (161 178 0) + 12 Power_Cycle_Count -O--CK 100 100 000 - 1653 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 180 +183 Runtime_Bad_Block -O--CK 100 100 010 - 67 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 180 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 5 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 252110 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 66 +228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 252110 +242 Total_LBAs_Read -O--CK 100 100 000 - 503103 +249 Unknown_Attribute PO--C- 100 100 000 - 10766 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7481 - +# 2 Short offline Completed without error 00% 7479 - +# 3 Short offline Completed without error 00% 2224 - +# 4 Short offline Completed without error 00% 2224 - +# 5 Short offline Completed without error 00% 2224 - +# 6 Extended offline Completed without error 00% 2224 - +# 7 Short offline Completed without error 00% 1181 - +# 8 Short offline Completed without error 00% 14 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1657 --- Lifetime Power-On Resets +0x01 0x010 4 7639 --- Power-on Hours +0x01 0x018 6 16726669002 --- Logical Sectors Written +0x01 0x028 6 33156147081 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4077 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4077 --- Number of Hardware Resets +0x06 0x010 4 2150 --- Number of ASR Events +0x06 0x018 4 5 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A3L/8C0C5446858D b/SSD/Intel/SSDSC2/SSDSC2BW180A3L/8C0C5446858D new file mode 100644 index 000000000..5efeb73ea --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A3L/8C0C5446858D @@ -0,0 +1,188 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2BW180A3L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LF1i +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 21 17:30:42 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 089 089 000 - 10103h+17m+13.700s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2494 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2285 +183 Runtime_Bad_Block -O--CK 100 100 000 - 60 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2285 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 315148 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 56 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 315148 +242 Host_Reads_32MiB -O--CK 100 100 000 - 414181 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 16348 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Self-test routine in progress 30% 9873 - +# 2 Short offline Self-test routine in progress 70% 9873 - +# 3 Short offline Self-test routine in progress 40% 7704 - +# 4 Short offline Self-test routine in progress 40% 7704 - +# 5 Short offline Self-test routine in progress 90% 7704 - +# 6 Short offline Self-test routine in progress 20% 9873 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2499 --- Lifetime Power-On Resets +0x01 0x010 4 10116 --- Power-on Hours +0x01 0x018 6 20857871006 --- Logical Sectors Written +0x01 0x028 6 27328538801 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8296 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8296 --- Number of Hardware Resets +0x06 0x010 4 4860 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/245CAD3124E7 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/245CAD3124E7 new file mode 100644 index 000000000..40ca52382 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/245CAD3124E7 @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 16 22:24:04 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 8008h+02m+34.940s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1025 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 28 +183 SATA_Downshift_Count -O--CK 100 100 000 - 10 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 031 048 000 - 31 (Min/Max 6/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 28 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 384944 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 33 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 093 093 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 384944 +242 Host_Reads_32MiB -O--CK 100 100 000 - 191650 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 45400 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 8005 - +# 2 Offline Interrupted (host reset) 10% 8004 - +# 3 Offline Interrupted (host reset) 10% 7986 - +# 4 Offline Interrupted (host reset) 10% 7985 - +# 5 Offline Interrupted (host reset) 10% 7985 - +# 6 Offline Interrupted (host reset) 10% 7985 - +# 7 Offline Interrupted (host reset) 10% 7985 - +# 8 Offline Interrupted (host reset) 10% 7985 - +# 9 Offline Interrupted (host reset) 10% 6433 - +#10 Offline Interrupted (host reset) 10% 6433 - +#11 Offline Interrupted (host reset) 10% 6433 - +#12 Offline Interrupted (host reset) 10% 6433 - +#13 Offline Interrupted (host reset) 10% 6102 - +#14 Offline Interrupted (host reset) 10% 6102 - +#15 Offline Interrupted (host reset) 10% 6102 - +#16 Offline Interrupted (host reset) 10% 6102 - +#17 Offline Interrupted (host reset) 10% 5491 - +#18 Offline Interrupted (host reset) 10% 4668 - +#19 Offline Interrupted (host reset) 10% 4668 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 6/48 Celsius +Lifetime Min/Max Temperature: 6/73 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (272) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1032 --- Lifetime Power-On Resets +0x01 0x010 4 8013 --- Power-on Hours +0x01 0x018 6 25420582606 --- Logical Sectors Written +0x01 0x028 6 12741109924 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1129 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1129 --- Number of Hardware Resets +0x06 0x010 4 58 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/3F4F9F52E1B7 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/3F4F9F52E1B7 new file mode 100644 index 000000000..e4810cc48 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/3F4F9F52E1B7 @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 23 17:50:27 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 24 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 11939h+32m+05.420s + 12 Power_Cycle_Count -O--CK 100 100 000 - 21 +170 Available_Reservd_Space PO--CK 084 084 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 12 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 12 +183 SATA_Downshift_Count -O--CK 100 100 000 - 2 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 025 051 000 - 25 (Min/Max 11/51) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2453556 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 29 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 084 084 010 - 0 +233 Media_Wearout_Indicator -O--CK 073 073 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2453556 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1029803 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 176984 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 11938 - +# 2 Offline Interrupted (host reset) 10% 11938 - +# 3 Offline Interrupted (host reset) 10% 11938 - +# 4 Offline Interrupted (host reset) 10% 11938 - +# 5 Offline Interrupted (host reset) 10% 8504 - +# 6 Offline Interrupted (host reset) 10% 25 - +# 7 Offline Interrupted (host reset) 10% 25 - +# 8 Offline Interrupted (host reset) 10% 25 - +# 9 Offline Interrupted (host reset) 10% 25 - +#10 Offline Interrupted (host reset) 10% 25 - +#11 Offline Interrupted (host reset) 10% 25 - +#12 Offline Interrupted (host reset) 10% 25 - +#13 Offline Interrupted (host reset) 10% 25 - +#14 Offline Interrupted (host reset) 10% 25 - +#15 Offline Interrupted (host reset) 10% 25 - +#16 Offline Interrupted (host reset) 10% 24 - +#17 Offline Interrupted (host reset) 10% 24 - +#18 Offline Interrupted (host reset) 10% 24 - +#19 Offline Interrupted (host reset) 10% 24 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 11/51 Celsius +Lifetime Min/Max Temperature: 11/61 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (346) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 11949 --- Power-on Hours +0x01 0x018 6 161005094039 --- Logical Sectors Written +0x01 0x028 6 67691700068 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 404 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 404 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/5136215935DF b/SSD/Intel/SSDSC2/SSDSC2BW180A4/5136215935DF new file mode 100644 index 000000000..44e10954b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/5136215935DF @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 20 12:32:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 32860h+52m+39.690s + 12 Power_Cycle_Count -O--CK 100 100 000 - 64 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 17 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 040 054 000 - 40 (Min/Max 16/54) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 4422902 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 6 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 066 066 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 4422902 +242 Host_Reads_32MiB -O--CK 100 100 000 - 312423 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 187910 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 32797 - +# 2 Offline Interrupted (host reset) 10% 32797 - +# 3 Offline Interrupted (host reset) 10% 32797 - +# 4 Offline Interrupted (host reset) 10% 32796 - +# 5 Offline Interrupted (host reset) 10% 32794 - +# 6 Offline Interrupted (host reset) 10% 32794 - +# 7 Offline Interrupted (host reset) 10% 32794 - +# 8 Offline Interrupted (host reset) 10% 25599 - +# 9 Offline Interrupted (host reset) 10% 24966 - +#10 Offline Interrupted (host reset) 10% 24649 - +#11 Offline Interrupted (host reset) 10% 21791 - +#12 Offline Interrupted (host reset) 10% 20200 - +#13 Offline Interrupted (host reset) 10% 20200 - +#14 Offline Interrupted (host reset) 10% 20200 - +#15 Short offline Completed without error 00% 20043 - +#16 Offline Interrupted (host reset) 10% 20043 - +#17 Offline Interrupted (host reset) 10% 20042 - +#18 Offline Interrupted (host reset) 10% 16186 - +#19 Offline Interrupted (host reset) 10% 16176 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 16/54 Celsius +Lifetime Min/Max Temperature: 16/72 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (334) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 70 --- Lifetime Power-On Resets +0x01 0x010 4 32865 --- Power-on Hours +0x01 0x018 6 289877698612 --- Logical Sectors Written +0x01 0x028 6 20491776264 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 420 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 420 --- Number of Hardware Resets +0x06 0x010 4 22 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/5AD0262E9209 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/5AD0262E9209 new file mode 100644 index 000000000..bafbd2d5a --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/5AD0262E9209 @@ -0,0 +1,222 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Feb 2 19:50:16 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 18599h+30m+04.710s + 12 Power_Cycle_Count -O--CK 100 100 000 - 49 +170 Available_Reservd_Space PO--CK 007 007 010 NOW 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 28 +183 SATA_Downshift_Count -O--CK 100 100 000 - 9 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 089 089 000 - 11 +190 Airflow_Temperature_Cel -O--CK 026 048 000 - 26 (Min/Max 20/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 28 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3754800 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 007 007 010 NOW 0 +233 Media_Wearout_Indicator -O--CK 047 047 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3754800 +242 Host_Reads_32MiB -O--CK 100 100 000 - 655899 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 367456 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 18574 - +# 2 Offline Interrupted (host reset) 10% 17256 - +# 3 Offline Interrupted (host reset) 10% 17236 - +# 4 Offline Interrupted (host reset) 10% 15754 - +# 5 Offline Interrupted (host reset) 10% 15747 - +# 6 Offline Interrupted (host reset) 10% 15746 - +# 7 Offline Interrupted (host reset) 10% 12355 - +# 8 Offline Interrupted (host reset) 10% 12355 - +# 9 Offline Interrupted (host reset) 10% 12135 - +#10 Offline Interrupted (host reset) 10% 12118 - +#11 Offline Interrupted (host reset) 10% 12118 - +#12 Offline Interrupted (host reset) 10% 12118 - +#13 Offline Interrupted (host reset) 10% 11037 - +#14 Offline Interrupted (host reset) 10% 11037 - +#15 Offline Interrupted (host reset) 10% 11037 - +#16 Offline Interrupted (host reset) 10% 10791 - +#17 Offline Interrupted (host reset) 10% 10791 - +#18 Offline Interrupted (host reset) 10% 10791 - +#19 Offline Interrupted (host reset) 10% 10007 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 20/48 Celsius +Lifetime Min/Max Temperature: 20/65 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (66) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 56 --- Lifetime Power-On Resets +0x01 0x010 4 18603 --- Power-on Hours +0x01 0x018 6 246092968781 --- Logical Sectors Written +0x01 0x028 6 43001800038 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 11 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 557 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 557 --- Number of Hardware Resets +0x06 0x010 4 34 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 48 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/6C21DFFB4646 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/6C21DFFB4646 new file mode 100644 index 000000000..393186ea6 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/6C21DFFB4646 @@ -0,0 +1,221 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC12 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 3 07:28:57 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 10 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 13182h+35m+24.220s + 12 Power_Cycle_Count -O--CK 100 100 000 - 89 +170 Available_Reservd_Space PO--CK 001 001 010 NOW 0 +171 Program_Fail_Count -O--CK 100 100 000 - 5 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 95 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 032 052 000 - 32 (Min/Max 6/52) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 95 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2404073 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 67 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 001 001 010 NOW 0 +233 Media_Wearout_Indicator -O--CK 056 056 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2404073 +242 Host_Reads_32MiB -O--CK 100 100 000 - 5037878 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 341044 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 13137 - +# 2 Offline Interrupted (host reset) 10% 12875 - +# 3 Offline Interrupted (host reset) 10% 12764 - +# 4 Offline Interrupted (host reset) 10% 12698 - +# 5 Offline Interrupted (host reset) 10% 12698 - +# 6 Offline Interrupted (host reset) 10% 12698 - +# 7 Offline Interrupted (host reset) 10% 12695 - +# 8 Offline Interrupted (host reset) 10% 12695 - +# 9 Offline Interrupted (host reset) 10% 12693 - +#10 Offline Interrupted (host reset) 10% 12693 - +#11 Offline Interrupted (host reset) 10% 12693 - +#12 Offline Interrupted (host reset) 10% 12693 - +#13 Offline Interrupted (host reset) 10% 12693 - +#14 Offline Interrupted (host reset) 10% 12693 - +#15 Offline Interrupted (host reset) 10% 12693 - +#16 Offline Interrupted (host reset) 10% 12693 - +#17 Offline Interrupted (host reset) 10% 12693 - +#18 Offline Interrupted (host reset) 10% 12687 - +#19 Offline Interrupted (host reset) 10% 12687 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 6/52 Celsius +Lifetime Min/Max Temperature: 6/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (323) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 91 --- Lifetime Power-On Resets +0x01 0x010 4 13191 --- Power-on Hours +0x01 0x018 6 157753059006 --- Logical Sectors Written +0x01 0x028 6 330356654337 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 785 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 20 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 14 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 20 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 785 --- Number of Hardware Resets +0x06 0x010 4 47 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 30 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/7A1909486660 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/7A1909486660 new file mode 100644 index 000000000..875144194 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/7A1909486660 @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: DC02 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 9 12:34:11 2025 NZDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 2 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 27927h+08m+09.710s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1097 +170 Available_Reservd_Space PO--CK 089 089 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 43 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 028 045 000 - 28 (Min/Max 7/45) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 43 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1242373 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 12 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 089 089 010 - 0 +233 Media_Wearout_Indicator -O--CK 082 082 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1242373 +242 Host_Reads_32MiB -O--CK 100 100 000 - 173761 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 96993 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 26725 - +# 2 Offline Interrupted (host reset) 10% 24286 - +# 3 Offline Interrupted (host reset) 10% 19089 - +# 4 Offline Interrupted (host reset) 10% 18919 - +# 5 Offline Interrupted (host reset) 10% 18919 - +# 6 Offline Interrupted (host reset) 10% 18081 - +# 7 Offline Interrupted (host reset) 10% 18076 - +# 8 Offline Interrupted (host reset) 10% 18075 - +# 9 Offline Interrupted (host reset) 10% 18075 - +#10 Offline Interrupted (host reset) 10% 18075 - +#11 Offline Interrupted (host reset) 10% 18075 - +#12 Offline Interrupted (host reset) 10% 16930 - +#13 Offline Interrupted (host reset) 10% 16114 - +#14 Offline Interrupted (host reset) 10% 13207 - +#15 Offline Interrupted (host reset) 10% 10553 - +#16 Offline Interrupted (host reset) 10% 10539 - +#17 Offline Interrupted (host reset) 10% 10144 - +#18 Offline Interrupted (host reset) 10% 4326 - +#19 Offline Interrupted (host reset) 10% 4026 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 7/45 Celsius +Lifetime Min/Max Temperature: 7/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (470) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1100 --- Lifetime Power-On Resets +0x01 0x010 4 27936 --- Power-on Hours +0x01 0x018 6 81619858622 --- Logical Sectors Written +0x01 0x028 6 11581915238 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3340 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3340 --- Number of Hardware Resets +0x06 0x010 4 116 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 19 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 46 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 67 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/AA695FD7C38C b/SSD/Intel/SSDSC2/SSDSC2BW180A4/AA695FD7C38C new file mode 100644 index 000000000..b6f86eaf2 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/AA695FD7C38C @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Nov 26 13:21:50 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 52645h+09m+10.310s + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 029 048 000 - 29 (Min/Max 18/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1767754 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 36 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 065 065 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1767754 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1011145 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 187844 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 52644 - +# 2 Offline Interrupted (host reset) 10% 48432 - +# 3 Offline Interrupted (host reset) 10% 46991 - +# 4 Offline Interrupted (host reset) 10% 46991 - +# 5 Offline Interrupted (host reset) 10% 46991 - +# 6 Offline Interrupted (host reset) 10% 46991 - +# 7 Offline Interrupted (host reset) 10% 46991 - +# 8 Offline Interrupted (host reset) 10% 46991 - +# 9 Offline Interrupted (host reset) 10% 46991 - +#10 Offline Interrupted (host reset) 10% 46991 - +#11 Offline Interrupted (host reset) 10% 42782 - +#12 Offline Interrupted (host reset) 10% 42573 - +#13 Offline Interrupted (host reset) 10% 39268 - +#14 Offline Interrupted (host reset) 10% 36585 - +#15 Offline Interrupted (host reset) 10% 36177 - +#16 Offline Interrupted (host reset) 10% 32751 - +#17 Offline Interrupted (host reset) 10% 25 - +#18 Offline Interrupted (host reset) 10% 25 - +#19 Offline Interrupted (host reset) 10% 24 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 18/48 Celsius +Lifetime Min/Max Temperature: 18/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (124) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 52647 --- Power-on Hours +0x01 0x018 6 115869889922 --- Logical Sectors Written +0x01 0x028 6 66283186755 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 229 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 229 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 36 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/D650180FF3BF b/SSD/Intel/SSDSC2/SSDSC2BW180A4/D650180FF3BF new file mode 100644 index 000000000..859d73c37 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/D650180FF3BF @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 6 19:18:59 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 12288h+08m+09.190s + 12 Power_Cycle_Count -O--CK 100 100 000 - 42 +170 Available_Reservd_Space PO--CK 012 012 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 9 +183 SATA_Downshift_Count -O--CK 100 100 000 - 4 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 030 051 000 - 30 (Min/Max 9/51) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 5 +225 Host_Writes_32MiB -O--CK 100 100 000 - 9004241 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 35 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 012 012 010 - 0 +233 Media_Wearout_Indicator -O--CK 040 040 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 9004241 +242 Host_Reads_32MiB -O--CK 100 100 000 - 4856980 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 394503 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 12256 - +# 2 Offline Interrupted (host reset) 10% 12247 - +# 3 Offline Interrupted (host reset) 10% 12225 - +# 4 Offline Interrupted (host reset) 10% 12216 - +# 5 Offline Interrupted (host reset) 10% 12162 - +# 6 Offline Interrupted (host reset) 10% 12160 - +# 7 Offline Interrupted (host reset) 10% 12160 - +# 8 Offline Interrupted (host reset) 10% 12160 - +# 9 Offline Interrupted (host reset) 10% 12160 - +#10 Offline Interrupted (host reset) 10% 12159 - +#11 Offline Interrupted (host reset) 10% 12159 - +#12 Offline Interrupted (host reset) 10% 12159 - +#13 Offline Interrupted (host reset) 10% 10485 - +#14 Offline Interrupted (host reset) 10% 9442 - +#15 Offline Interrupted (host reset) 10% 9442 - +#16 Offline Interrupted (host reset) 10% 9442 - +#17 Offline Interrupted (host reset) 10% 8292 - +#18 Offline Interrupted (host reset) 10% 8292 - +#19 Offline Interrupted (host reset) 10% 8279 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 9/51 Celsius +Lifetime Min/Max Temperature: 9/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (5) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 12294 --- Power-on Hours +0x01 0x018 6 590301745065 --- Logical Sectors Written +0x01 0x028 6 318501442012 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 622 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 622 --- Number of Hardware Resets +0x06 0x010 4 240 --- Number of ASR Events +0x06 0x018 4 5 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 54 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/D6F76E7D8AB9 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/D6F76E7D8AB9 new file mode 100644 index 000000000..72cb81dc7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/D6F76E7D8AB9 @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 26 18:33:03 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 3872h+14m+45.520s + 12 Power_Cycle_Count -O--CK 100 100 000 - 89 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 26 +183 SATA_Downshift_Count -O--CK 100 100 000 - 15 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 026 051 000 - 26 (Min/Max 18/51) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 244817 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 41 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 244817 +242 Host_Reads_32MiB -O--CK 100 100 000 - 168600 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 25687 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 3871 - +# 2 Offline Interrupted (host reset) 10% 3444 - +# 3 Offline Interrupted (host reset) 10% 3444 - +# 4 Offline Interrupted (host reset) 10% 3444 - +# 5 Offline Interrupted (host reset) 10% 3444 - +# 6 Offline Interrupted (host reset) 10% 3444 - +# 7 Offline Interrupted (host reset) 10% 3443 - +# 8 Offline Interrupted (host reset) 10% 3399 - +# 9 Offline Interrupted (host reset) 10% 2940 - +#10 Offline Interrupted (host reset) 10% 2840 - +#11 Offline Interrupted (host reset) 10% 2769 - +#12 Offline Interrupted (host reset) 10% 2769 - +#13 Offline Interrupted (host reset) 10% 2769 - +#14 Offline Interrupted (host reset) 10% 2752 - +#15 Offline Interrupted (host reset) 10% 2747 - +#16 Offline Interrupted (host reset) 10% 2747 - +#17 Offline Interrupted (host reset) 10% 2746 - +#18 Offline Interrupted (host reset) 10% 2746 - +#19 Offline Interrupted (host reset) 10% 2746 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 18/51 Celsius +Lifetime Min/Max Temperature: 18/64 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (241) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 3877 --- Power-on Hours +0x01 0x018 6 16246346029 --- Logical Sectors Written +0x01 0x028 6 11238880110 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 623 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 623 --- Number of Hardware Resets +0x06 0x010 4 28 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/DB396C634C6C b/SSD/Intel/SSDSC2/SSDSC2BW180A4/DB396C634C6C new file mode 100644 index 000000000..5962a782b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/DB396C634C6C @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 30 09:59:20 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 41005h+17m+28.360s + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 24 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 038 048 000 - 38 (Min/Max 9/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 24 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1787596 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 41 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 060 060 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1787596 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1244268 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 207736 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 40985 - +# 2 Offline Interrupted (host reset) 10% 40984 - +# 3 Offline Interrupted (host reset) 10% 40697 - +# 4 Offline Interrupted (host reset) 10% 40268 - +# 5 Offline Interrupted (host reset) 10% 37419 - +# 6 Offline Interrupted (host reset) 10% 36750 - +# 7 Offline Interrupted (host reset) 10% 31928 - +# 8 Offline Interrupted (host reset) 10% 30945 - +# 9 Offline Interrupted (host reset) 10% 28389 - +#10 Offline Interrupted (host reset) 10% 26131 - +#11 Offline Interrupted (host reset) 10% 26048 - +#12 Offline Interrupted (host reset) 10% 26045 - +#13 Offline Interrupted (host reset) 10% 26042 - +#14 Offline Interrupted (host reset) 10% 26039 - +#15 Offline Interrupted (host reset) 10% 26036 - +#16 Offline Interrupted (host reset) 10% 26032 - +#17 Offline Interrupted (host reset) 10% 26029 - +#18 Offline Interrupted (host reset) 10% 25935 - +#19 Offline Interrupted (host reset) 10% 25614 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 9/48 Celsius +Lifetime Min/Max Temperature: 9/73 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (267) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 61 --- Lifetime Power-On Resets +0x01 0x010 4 41009 --- Power-on Hours +0x01 0x018 6 117344802116 --- Logical Sectors Written +0x01 0x028 6 81725493912 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 399 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 399 --- Number of Hardware Resets +0x06 0x010 4 32 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/F4C33859B4C8 b/SSD/Intel/SSDSC2/SSDSC2BW180A4/F4C33859B4C8 new file mode 100644 index 000000000..b3b289abc --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/F4C33859B4C8 @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 26 18:54:15 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 20451h+40m+52.460s + 12 Power_Cycle_Count -O--CK 100 100 000 - 35 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 18 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 037 051 000 - 37 (Min/Max 15/51) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 18 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3311105 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 25 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 053 053 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3311105 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1152791 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 246927 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 20431 - +# 2 Offline Interrupted (host reset) 10% 20430 - +# 3 Offline Interrupted (host reset) 10% 20430 - +# 4 Offline Interrupted (host reset) 10% 20420 - +# 5 Offline Interrupted (host reset) 10% 20410 - +# 6 Offline Interrupted (host reset) 10% 20410 - +# 7 Offline Interrupted (host reset) 10% 20291 - +# 8 Offline Interrupted (host reset) 10% 20283 - +# 9 Offline Interrupted (host reset) 10% 20283 - +#10 Offline Interrupted (host reset) 10% 20283 - +#11 Offline Interrupted (host reset) 10% 20283 - +#12 Offline Interrupted (host reset) 10% 20283 - +#13 Offline Interrupted (host reset) 10% 20283 - +#14 Offline Interrupted (host reset) 10% 12896 - +#15 Offline Interrupted (host reset) 10% 10722 - +#16 Offline Interrupted (host reset) 10% 8556 - +#17 Offline Interrupted (host reset) 10% 7176 - +#18 Offline Interrupted (host reset) 10% 130 - +#19 Offline Interrupted (host reset) 10% 31 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 15/51 Celsius +Lifetime Min/Max Temperature: 15/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (418) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 42 --- Lifetime Power-On Resets +0x01 0x010 4 20457 --- Power-on Hours +0x01 0x018 6 217196336261 --- Logical Sectors Written +0x01 0x028 6 75743632853 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 210 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 210 --- Number of Hardware Resets +0x06 0x010 4 15 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 48 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180A4/FC0FBCB284FB b/SSD/Intel/SSDSC2/SSDSC2BW180A4/FC0FBCB284FB new file mode 100644 index 000000000..9c8e3c063 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180A4/FC0FBCB284FB @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 31 23:37:03 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 13610h+05m+10.860s + 12 Power_Cycle_Count -O--CK 100 100 000 - 35 +170 Available_Reservd_Space PO--CK 030 030 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 14 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 027 056 000 - 27 (Min/Max 19/56) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 14 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 7676706 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 13 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 030 030 010 - 0 +233 Media_Wearout_Indicator -O--CK 048 048 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 7676706 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1175038 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 352649 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 13605 - +# 2 Offline Interrupted (host reset) 10% 13604 - +# 3 Offline Interrupted (host reset) 10% 13603 - +# 4 Offline Interrupted (host reset) 10% 13601 - +# 5 Offline Interrupted (host reset) 10% 13588 - +# 6 Offline Interrupted (host reset) 10% 13583 - +# 7 Offline Interrupted (host reset) 10% 13577 - +# 8 Offline Interrupted (host reset) 10% 13577 - +# 9 Offline Interrupted (host reset) 10% 13546 - +#10 Offline Interrupted (host reset) 10% 13546 - +#11 Offline Interrupted (host reset) 10% 13532 - +#12 Offline Interrupted (host reset) 10% 13529 - +#13 Offline Interrupted (host reset) 10% 13528 - +#14 Offline Interrupted (host reset) 10% 13520 - +#15 Offline Interrupted (host reset) 10% 13515 - +#16 Offline Interrupted (host reset) 10% 13512 - +#17 Offline Interrupted (host reset) 10% 13512 - +#18 Offline Interrupted (host reset) 10% 13512 - +#19 Offline Interrupted (host reset) 10% 13511 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 19/56 Celsius +Lifetime Min/Max Temperature: 19/65 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (137) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 13612 --- Power-on Hours +0x01 0x018 6 503118958310 --- Logical Sectors Written +0x01 0x028 6 77024062165 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 310 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 310 --- Number of Hardware Resets +0x06 0x010 4 13 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 48 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180H6/1C0E60458B02 b/SSD/Intel/SSDSC2/SSDSC2BW180H6/1C0E60458B02 new file mode 100644 index 000000000..b8d6de57a --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180H6/1C0E60458B02 @@ -0,0 +1,202 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 5 21:16:41 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 4291h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 30 +170 Available_Reservd_Space PO--CK 096 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 10 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 022 100 000 - 22 (Min/Max 17/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1073138 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 17 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 096 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 054 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1073138 +242 Host_Reads_32MiB -O--CK 100 100 000 - 212204 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 131553 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 17/48 Celsius +Lifetime Min/Max Temperature: 17/71 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (112) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 4291 --- Power-on Hours +0x01 0x018 6 70329209091 --- Logical Sectors Written +0x01 0x020 6 1134270560 --- Number of Write Commands +0x01 0x028 6 13907029747 --- Logical Sectors Read +0x01 0x030 6 117450991 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 37 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 192 --- Number of Hardware Resets +0x06 0x010 4 7 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 71 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180H6/AC1AA230F0DB b/SSD/Intel/SSDSC2/SSDSC2BW180H6/AC1AA230F0DB new file mode 100644 index 000000000..652ceb77b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180H6/AC1AA230F0DB @@ -0,0 +1,201 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 4 14:46:25 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 3659h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 9 +170 Available_Reservd_Space PO--CK 095 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 026 100 000 - 26 (Min/Max 19/38) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 118560 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 10 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 095 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 094 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 118560 +242 Host_Reads_32MiB -O--CK 100 100 000 - 3850 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 26339 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 19/38 Celsius +Lifetime Min/Max Temperature: 19/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (19) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 3659 --- Power-on Hours +0x01 0x018 6 7769973857 --- Logical Sectors Written +0x01 0x020 6 108375172 --- Number of Write Commands +0x01 0x028 6 252368204 --- Logical Sectors Read +0x01 0x030 6 17309922 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 110 --- Number of Hardware Resets +0x06 0x010 4 9 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180H6/DBB2E1FE8F61 b/SSD/Intel/SSDSC2/SSDSC2BW180H6/DBB2E1FE8F61 new file mode 100644 index 000000000..5bbad96a7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180H6/DBB2E1FE8F61 @@ -0,0 +1,203 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 00:53:57 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 12232h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 103 +170 Available_Reservd_Space PO--CK 091 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 22 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 029 100 000 - 29 (Min/Max 20/39) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 22 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 521189 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 31 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 091 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 059 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 521189 +242 Host_Reads_32MiB -O--CK 100 100 000 - 232245 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 116289 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 00% 12232 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 20/39 Celsius +Lifetime Min/Max Temperature: 20/74 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (124) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 103 --- Lifetime Power-On Resets +0x01 0x010 4 12232 --- Power-on Hours +0x01 0x018 6 34156664260 --- Logical Sectors Written +0x01 0x020 6 746068673 --- Number of Write Commands +0x01 0x028 6 15220454344 --- Logical Sectors Read +0x01 0x030 6 103913889 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 32 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 34 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 495 --- Number of Hardware Resets +0x06 0x010 4 8 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 64 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW180H6/F90459BF171C b/SSD/Intel/SSDSC2/SSDSC2BW180H6/F90459BF171C new file mode 100644 index 000000000..a29f3a95e --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW180H6/F90459BF171C @@ -0,0 +1,204 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW180H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 11 21:24:48 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 5857h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 44 +170 Available_Reservd_Space PO--CK 090 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 12 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 033 100 000 - 33 (Min/Max 14/47) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1274462 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 090 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 048 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1274462 +242 Host_Reads_32MiB -O--CK 100 100 000 - 207668 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 143305 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 00% 5857 - +# 2 Short offline Aborted by host 00% 5302 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 14/47 Celsius +Lifetime Min/Max Temperature: 14/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (250) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x010 4 5857 --- Power-on Hours +0x01 0x018 6 83523197939 --- Logical Sectors Written +0x01 0x020 6 1171290633 --- Number of Write Commands +0x01 0x028 6 13609780432 --- Logical Sectors Read +0x01 0x030 6 113515305 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 28 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 274 --- Number of Hardware Resets +0x06 0x010 4 29 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 80 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW240A4/097F947BB1EE b/SSD/Intel/SSDSC2/SSDSC2BW240A4/097F947BB1EE new file mode 100644 index 000000000..b0f03a7af --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW240A4/097F947BB1EE @@ -0,0 +1,222 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW240A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Dec 31 23:04:58 2024 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 19406h+36m+21.200s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1715 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 593 +183 SATA_Downshift_Count -O--CK 100 100 000 - 4010 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 031 059 000 - 31 (Min/Max 16/59) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 593 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2 +225 Host_Writes_32MiB -O--CK 100 100 000 - 460043 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 58 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 086 086 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 460043 +242 Host_Reads_32MiB -O--CK 100 100 000 - 660477 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 109913 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 19397 - +# 2 Offline Interrupted (host reset) 10% 19330 - +# 3 Offline Interrupted (host reset) 10% 19309 - +# 4 Offline Interrupted (host reset) 10% 19303 - +# 5 Offline Interrupted (host reset) 10% 19303 - +# 6 Offline Interrupted (host reset) 10% 19289 - +# 7 Offline Interrupted (host reset) 10% 19282 - +# 8 Offline Interrupted (host reset) 10% 19264 - +# 9 Offline Interrupted (host reset) 10% 19263 - +#10 Offline Interrupted (host reset) 10% 19263 - +#11 Offline Interrupted (host reset) 10% 19261 - +#12 Offline Interrupted (host reset) 10% 19261 - +#13 Offline Interrupted (host reset) 10% 19150 - +#14 Offline Interrupted (host reset) 10% 19080 - +#15 Offline Interrupted (host reset) 10% 18259 - +#16 Offline Interrupted (host reset) 10% 18259 - +#17 Offline Interrupted (host reset) 10% 18258 - +#18 Offline Interrupted (host reset) 10% 18253 - +#19 Offline Interrupted (host reset) 10% 18236 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 16/59 Celsius +Lifetime Min/Max Temperature: 16/68 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (444) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1726 --- Lifetime Power-On Resets +0x01 0x010 4 19416 --- Power-on Hours +0x01 0x018 6 31874416969 --- Logical Sectors Written +0x01 0x028 6 45384139630 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 12012 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 12012 --- Number of Hardware Resets +0x06 0x010 4 2708 --- Number of ASR Events +0x06 0x018 4 2 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 17 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 110 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 190 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW240A4/66A770506F37 b/SSD/Intel/SSDSC2/SSDSC2BW240A4/66A770506F37 new file mode 100644 index 000000000..05a6163b7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW240A4/66A770506F37 @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW240A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 30 09:35:45 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 3554h+36m+13.260s + 12 Power_Cycle_Count -O--CK 100 100 000 - 60 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 12 +183 SATA_Downshift_Count -O--CK 100 100 000 - 9 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 029 054 000 - 29 (Min/Max 13/54) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 644863 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 36 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 644863 +242 Host_Reads_32MiB -O--CK 100 100 000 - 358736 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 44125 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 2531 - +# 2 Offline Interrupted (host reset) 10% 2531 - +# 3 Offline Interrupted (host reset) 10% 2531 - +# 4 Offline Interrupted (host reset) 10% 2530 - +# 5 Offline Interrupted (host reset) 10% 2530 - +# 6 Offline Interrupted (host reset) 10% 2524 - +# 7 Offline Interrupted (host reset) 10% 2523 - +# 8 Offline Interrupted (host reset) 10% 2522 - +# 9 Offline Interrupted (host reset) 10% 2522 - +#10 Offline Interrupted (host reset) 10% 2522 - +#11 Offline Interrupted (host reset) 10% 2522 - +#12 Offline Interrupted (host reset) 10% 2522 - +#13 Offline Interrupted (host reset) 10% 2522 - +#14 Offline Interrupted (host reset) 10% 2522 - +#15 Offline Interrupted (host reset) 10% 2522 - +#16 Offline Interrupted (host reset) 10% 2522 - +#17 Offline Interrupted (host reset) 10% 2521 - +#18 Offline Interrupted (host reset) 10% 2521 - +#19 Offline Interrupted (host reset) 10% 2520 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 13/54 Celsius +Lifetime Min/Max Temperature: 13/71 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (88) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 71 --- Lifetime Power-On Resets +0x01 0x010 4 3564 --- Power-on Hours +0x01 0x018 6 43774551242 --- Logical Sectors Written +0x01 0x028 6 25397050169 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 265 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 265 --- Number of Hardware Resets +0x06 0x010 4 14 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW240H6/805ECD4026E6 b/SSD/Intel/SSDSC2/SSDSC2BW240H6/805ECD4026E6 new file mode 100644 index 000000000..363896d83 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW240H6/805ECD4026E6 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 12.4-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW240H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 12:11:33 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 8989h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 705 +170 Available_Reservd_Space PO--CK 095 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 28 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 030 100 000 - 30 (Min/Max 10/46) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 28 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 53 +225 Host_Writes_32MiB -O--CK 100 100 000 - 457958 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 27 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 095 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 089 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 457958 +242 Host_Reads_32MiB -O--CK 100 100 000 - 176637 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 52564 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8989 - +# 2 Short offline Completed without error 00% 7103 - +# 3 Short offline Completed without error 00% 7021 - +# 4 Short offline Aborted by host 00% 7018 - +# 5 Short offline Aborted by host 00% 763 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 10/46 Celsius +Lifetime Min/Max Temperature: 10/64 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (208) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 705 --- Lifetime Power-On Resets +0x01 0x010 4 8989 --- Power-on Hours +0x01 0x018 6 30012752386 --- Logical Sectors Written +0x01 0x020 6 378020411 --- Number of Write Commands +0x01 0x028 6 11576115126 --- Logical Sectors Read +0x01 0x030 6 160336707 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3150 --- Number of Hardware Resets +0x06 0x010 4 430 --- Number of ASR Events +0x06 0x018 4 53 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 22 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW240H6/EDA3DCD8A7C6 b/SSD/Intel/SSDSC2/SSDSC2BW240H6/EDA3DCD8A7C6 new file mode 100644 index 000000000..3efa1a55a --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW240H6/EDA3DCD8A7C6 @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW240H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 17 09:12:04 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 15165h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 52 +170 Available_Reservd_Space PO--CK 093 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 20 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 018 100 000 - 18 (Min/Max 12/52) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 20 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2710673 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 42 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 093 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 005 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2710673 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1038671 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 348724 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 00% 15165 - +# 2 Short offline Aborted by host 00% 15068 - +# 3 Short offline Aborted by host 00% 15068 - +# 4 Short offline Aborted by host 00% 15068 - +# 5 Conveyance offline Aborted by host 00% 15068 - +# 6 Short offline Aborted by host 00% 7740 - +# 7 Short offline Aborted by host 00% 7740 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 18 Celsius +Power Cycle Min/Max Temperature: 12/52 Celsius +Lifetime Min/Max Temperature: 12/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (10) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 15165 --- Power-on Hours +0x01 0x018 6 177646680139 --- Logical Sectors Written +0x01 0x020 6 2245820414 --- Number of Write Commands +0x01 0x028 6 68070342901 --- Logical Sectors Read +0x01 0x030 6 579278128 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 18 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 717 --- Number of Hardware Resets +0x06 0x010 4 34 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 100 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW480A4/342A8702D3B4 b/SSD/Intel/SSDSC2/SSDSC2BW480A4/342A8702D3B4 new file mode 100644 index 000000000..835d2c841 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW480A4/342A8702D3B4 @@ -0,0 +1,219 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW480A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Nov 5 09:36:22 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 19943h+06m+47.920s + 12 Power_Cycle_Count -O--CK 100 100 000 - 71 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 28 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 034 043 000 - 34 (Min/Max 20/43) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 28 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 57470 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 8 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 57470 +242 Host_Reads_32MiB -O--CK 100 100 000 - 2857 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 37239 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 19941 - +# 2 Offline Interrupted (host reset) 10% 19941 - +# 3 Offline Interrupted (host reset) 10% 19939 - +# 4 Offline Interrupted (host reset) 10% 19939 - +# 5 Offline Interrupted (host reset) 10% 19936 - +# 6 Offline Interrupted (host reset) 10% 19936 - +# 7 Offline Interrupted (host reset) 10% 19936 - +# 8 Offline Interrupted (host reset) 10% 19936 - +# 9 Offline Interrupted (host reset) 10% 19935 - +#10 Offline Interrupted (host reset) 10% 19935 - +#11 Offline Interrupted (host reset) 10% 19935 - +#12 Offline Interrupted (host reset) 10% 19935 - +#13 Offline Interrupted (host reset) 10% 19935 - +#14 Offline Interrupted (host reset) 10% 19935 - +#15 Offline Interrupted (host reset) 10% 19935 - +#16 Offline Interrupted (host reset) 10% 19935 - +#17 Offline Interrupted (host reset) 10% 19888 - +#18 Offline Interrupted (host reset) 10% 19888 - +#19 Offline Interrupted (host reset) 10% 19888 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 20/43 Celsius +Lifetime Min/Max Temperature: 20/66 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (101) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 78 --- Lifetime Power-On Resets +0x01 0x010 4 19953 --- Power-on Hours +0x01 0x018 6 3966153890 --- Logical Sectors Written +0x01 0x028 6 381890657 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 409 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 409 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW480H6/7AC11C6CDABD b/SSD/Intel/SSDSC2/SSDSC2BW480H6/7AC11C6CDABD new file mode 100644 index 000000000..379ff8559 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW480H6/7AC11C6CDABD @@ -0,0 +1,205 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW480H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG20 +User Capacity: 480,102,899,200 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 17 17:56:36 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 735h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 29 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3 +183 SATA_Downshift_Count -O--CK 100 100 000 - 1 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 021 100 000 - 21 (Min/Max 20/40) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 3 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 6071 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 41 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 6071 +242 Host_Reads_32MiB -O--CK 100 100 000 - 3563 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 1123 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 701 - +# 2 Extended offline Aborted by host 10% 701 - +# 3 Extended offline Aborted by host 10% 701 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 21 Celsius +Power Cycle Min/Max Temperature: 20/40 Celsius +Lifetime Min/Max Temperature: 20/69 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (38) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 735 --- Power-on Hours +0x01 0x018 6 397931807 --- Logical Sectors Written +0x01 0x020 6 4033594 --- Number of Write Commands +0x01 0x028 6 233535881 --- Logical Sectors Read +0x01 0x030 6 2637711 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 21 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 226 --- Number of Hardware Resets +0x06 0x010 4 42 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BX200G4R/26B067E767D0 b/SSD/Intel/SSDSC2/SSDSC2BX200G4R/26B067E767D0 new file mode 100644 index 000000000..8848b3893 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BX200G4R/26B067E767D0 @@ -0,0 +1,221 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BX200G4R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: G201DL2E +User Capacity: 200,049,647,616 bytes [200 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 5 17:28:13 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 273 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 196455 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 59222 + 12 Power_Cycle_Count -O--CK 100 100 000 - 96 + 13 Read_Soft_Error_Rate -OSRC- 130 130 000 - 196455 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 88 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 5455 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 34 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 1378685424510 +202 Unknown_SSD_Attribute POS--K 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 45222 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 45222 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 45222 +242 Host_Reads_32MiB -O--CK 100 100 000 - 41742 +245 Unknown_Attribute -O--CK 100 100 000 - 100 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 59054 - +# 2 Extended offline Completed without error 00% 59035 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 176192900831383041 7205815500444532736 Not_testing + 2 360287970189639780 21891707683484169 Not_testing + 3 7205814430997676032 360287970189648740 Not_testing + 4 176192771982368269 7205816247768842240 Not_testing + 5 360287970189639780 5998267103982260 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 33/34 Celsius +Lifetime Min/Max Temperature: 13/36 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (235) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 96 --- Lifetime Power-On Resets +0x01 0x018 6 2963674648 --- Logical Sectors Written +0x01 0x020 6 119374644 --- Number of Write Commands +0x01 0x028 6 2735603901 --- Logical Sectors Read +0x01 0x030 6 17575315 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 17 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BX400G4R/D755643E7E83 b/SSD/Intel/SSDSC2/SSDSC2BX400G4R/D755643E7E83 new file mode 100644 index 000000000..1664d0ec0 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BX400G4R/D755643E7E83 @@ -0,0 +1,214 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BX400G4R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: G201DL22 +User Capacity: 400,088,457,216 bytes [400 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Dec 18 03:35:32 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 5868974 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 85100 + 12 Power_Cycle_Count -O--CK 100 100 000 - 45 + 13 Read_Soft_Error_Rate -OSRC- 109 100 000 - 51545476526 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 10908 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 28 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 1503484123042 +202 Unknown_SSD_Attribute POS--K 100 100 000 - 0 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 389 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 4 +228 Workload_Minutes -O--CK 100 100 000 - 5105499 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 211423 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 1544 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14 - +# 2 Extended offline Completed without error 00% 14 - +# 3 Short offline Completed without error 00% 13 - +# 4 Short offline Completed without error 00% 12 - +# 5 Short offline Completed without error 00% 5 - +# 6 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 27/32 Celsius +Lifetime Min/Max Temperature: 6/40 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (46) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x018 6 13855872325 --- Logical Sectors Written +0x01 0x020 6 371234806 --- Number of Write Commands +0x01 0x028 6 2787185322 --- Logical Sectors Read +0x01 0x030 6 10643952 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 30 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 333 --- Number of Hardware Resets +0x06 0x010 4 264 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT060A3/438B0A925B6B b/SSD/Intel/SSDSC2/SSDSC2CT060A3/438B0A925B6B new file mode 100644 index 000000000..bcac3856d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT060A3/438B0A925B6B @@ -0,0 +1,176 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT060A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 300i +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 20 10:09:05 2025 WEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 913874h+18m+03.210s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1678 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1668 +225 Host_Writes_32MiB -O--CK 100 100 000 - 687364 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 096 096 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 687364 +242 Host_Reads_32MiB -O--CK 100 100 000 - 212932 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 22919 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (74) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1693 --- Lifetime Power-On Resets +0x01 0x010 4 19080 --- Power-on Hours +0x01 0x018 6 45194623838 --- Logical Sectors Written +0x01 0x028 6 14088867891 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5934 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5934 --- Number of Hardware Resets +0x06 0x010 4 2449 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT180A4/0DFF57CC0675 b/SSD/Intel/SSDSC2/SSDSC2CT180A4/0DFF57CC0675 new file mode 100644 index 000000000..5d6aaae99 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT180A4/0DFF57CC0675 @@ -0,0 +1,175 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT180A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 335t +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Nov 24 00:44:31 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 10127h+43m+52.080s + 12 Power_Cycle_Count -O--CK 100 100 000 - 6646 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 281 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1941073 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 092 092 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1941073 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1472152 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 58288 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9346 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 6687 --- Lifetime Power-On Resets +0x01 0x010 4 10174 --- Power-on Hours +0x01 0x018 6 134679053324 --- Logical Sectors Written +0x01 0x028 6 104221667393 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 42319 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 42319 --- Number of Hardware Resets +0x06 0x010 4 40940 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT180A4/6978A4309216 b/SSD/Intel/SSDSC2/SSDSC2CT180A4/6978A4309216 new file mode 100644 index 000000000..58f7bdf78 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT180A4/6978A4309216 @@ -0,0 +1,175 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT180A4 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 335t +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jan 9 19:55:49 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 61673h+29m+13.140s + 12 Power_Cycle_Count -O--CK 100 100 000 - 573 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 192 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1855846 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1855846 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1192623 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 41652 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 614 --- Lifetime Power-On Resets +0x01 0x010 4 61732 --- Power-on Hours +0x01 0x018 6 127645303214 --- Logical Sectors Written +0x01 0x028 6 84454286419 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5005 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5005 --- Number of Hardware Resets +0x06 0x010 4 1180 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW060A3/C3A11F6C8571 b/SSD/Intel/SSDSC2/SSDSC2CW060A3/C3A11F6C8571 new file mode 100644 index 000000000..c414b196b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW060A3/C3A11F6C8571 @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW060A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 400i +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 2 21:53:14 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 909365h+29m+20.520s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2099 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2095 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt POSR-- 120 120 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2095 +225 Host_Writes_32MiB -O--CK 100 100 000 - 67132 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 61 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 67132 +242 Host_Reads_32MiB -O--CK 100 100 000 - 108569 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 3586 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 33892 (205) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2137 --- Lifetime Power-On Resets +0x01 0x010 4 14571 --- Power-on Hours +0x01 0x018 6 7815157057 --- Logical Sectors Written +0x01 0x028 6 10641735079 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8595 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8595 --- Number of Hardware Resets +0x06 0x010 4 2770 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW120A3/30007DFD5C83 b/SSD/Intel/SSDSC2/SSDSC2CW120A3/30007DFD5C83 new file mode 100644 index 000000000..8dd0d715f --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW120A3/30007DFD5C83 @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW120A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 400i +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Dec 28 14:51:08 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 900105h+06m+37.560s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1616 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1368 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt POSR-- 120 120 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1368 +225 Host_Writes_32MiB -O--CK 100 100 000 - 171119 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 51 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 171119 +242 Host_Reads_32MiB -O--CK 100 100 000 - 178610 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 5992 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 4195 (93) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1655 --- Lifetime Power-On Resets +0x01 0x010 4 5311 --- Power-on Hours +0x01 0x018 6 14337085687 --- Logical Sectors Written +0x01 0x028 6 15288163347 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6048 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6048 --- Number of Hardware Resets +0x06 0x010 4 5391 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW120A3/400CBF31E673 b/SSD/Intel/SSDSC2/SSDSC2CW120A3/400CBF31E673 new file mode 100644 index 000000000..13e2b91ef --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW120A3/400CBF31E673 @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW120A3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 400i +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 18 00:01:46 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 923922h+04m+34.350s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1413 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1081 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt POSR-- 120 120 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1081 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1084420 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 51 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1084420 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1144037 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 25064 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (13) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1423 --- Lifetime Power-On Resets +0x01 0x010 4 29128 --- Power-on Hours +0x01 0x018 6 72503070952 --- Logical Sectors Written +0x01 0x028 6 76628030803 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 12108 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 12108 --- Number of Hardware Resets +0x06 0x010 4 7404 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW120A3/A806E332567B b/SSD/Intel/SSDSC2/SSDSC2CW120A3/A806E332567B new file mode 100644 index 000000000..543d3313f --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW120A3/A806E332567B @@ -0,0 +1,180 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW120A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 400i +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 1 11:46:23 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 947578h+45m+49.480s + 12 Power_Cycle_Count -O--CK 100 100 000 - 436 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 425 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt POSR-- 120 120 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 425 +225 Host_Writes_32MiB -O--CK 100 100 000 - 332293 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 54 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 332293 +242 Host_Reads_32MiB -O--CK 100 100 000 - 401966 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 17899 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 442 --- Lifetime Power-On Resets +0x01 0x010 4 52784 --- Power-on Hours +0x01 0x018 6 26367239346 --- Logical Sectors Written +0x01 0x028 6 31613767223 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2541 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2541 --- Number of Hardware Resets +0x06 0x010 4 1107 --- Number of ASR Events +0x06 0x018 4 26 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW180A3/10ED0E7C635D b/SSD/Intel/SSDSC2/SSDSC2CW180A3/10ED0E7C635D new file mode 100644 index 000000000..4fb8bad33 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW180A3/10ED0E7C635D @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW180A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 400i +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 8 22:24:13 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 914452h+54m+25.040s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2141 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2138 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2138 +225 Host_Writes_32MiB -O--CK 100 100 000 - 762201 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 59 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 762201 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1116150 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 22701 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2147 --- Lifetime Power-On Resets +0x01 0x010 4 19658 --- Power-on Hours +0x01 0x018 6 50155964980 --- Logical Sectors Written +0x01 0x028 6 73332784564 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7307 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7307 --- Number of Hardware Resets +0x06 0x010 4 4815 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW240A3/14BE1CA04B12 b/SSD/Intel/SSDSC2/SSDSC2CW240A3/14BE1CA04B12 new file mode 100644 index 000000000..5736b1d67 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW240A3/14BE1CA04B12 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW240A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 400i +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 15:35:16 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 957312h+45m+58.670s + 12 Power_Cycle_Count -O--CK 100 100 000 - 200 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 200 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 200 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1122170 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 86 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1122170 +242 Host_Reads_32MiB -O--CK 100 100 000 - 7272701 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 51404 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 206 --- Lifetime Power-On Resets +0x01 0x010 4 62518 --- Power-on Hours +0x01 0x018 6 73750084755 --- Logical Sectors Written +0x01 0x028 6 476808646605 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1906 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1906 --- Number of Hardware Resets +0x06 0x010 4 590 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 31 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW240A3/96443AD72FE5 b/SSD/Intel/SSDSC2/SSDSC2CW240A3/96443AD72FE5 new file mode 100644 index 000000000..cf762b84c --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW240A3/96443AD72FE5 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW240A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 400i +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 16 12:11:16 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 955475h+33m+21.080s + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 53 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 53 +225 Host_Writes_32MiB -O--CK 100 100 000 - 203066 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 94 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 203066 +242 Host_Reads_32MiB -O--CK 100 100 000 - 3711040 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 21741 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 59 --- Lifetime Power-On Resets +0x01 0x010 4 60681 --- Power-on Hours +0x01 0x018 6 13515705968 --- Logical Sectors Written +0x01 0x028 6 243391536257 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1314 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1314 --- Number of Hardware Resets +0x06 0x010 4 502 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 36 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW240A3/E000ADCFFE0E b/SSD/Intel/SSDSC2/SSDSC2CW240A3/E000ADCFFE0E new file mode 100644 index 000000000..dc77208ed --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW240A3/E000ADCFFE0E @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW240A3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 400i +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed May 28 13:54:50 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 939509h+57m+57.050s + 12 Power_Cycle_Count -O--CK 100 100 000 - 89 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 88 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 88 +225 Host_Writes_32MiB -O--CK 100 100 000 - 106118 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 36 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 106118 +242 Host_Reads_32MiB -O--CK 100 100 000 - 61259 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 15811 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 98 --- Lifetime Power-On Resets +0x01 0x010 4 44714 --- Power-on Hours +0x01 0x018 6 7160500896 --- Logical Sectors Written +0x01 0x028 6 4195935334 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1316 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1316 --- Number of Hardware Resets +0x06 0x010 4 469 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/2AA43997469B b/SSD/Intel/SSDSC2/SSDSC2KB019T7/2AA43997469B new file mode 100644 index 000000000..dfa75af3c --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/2AA43997469B @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2403 (139 6559) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 17/25) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 54 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275627 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 54 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522564 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 52736 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/25 Celsius +Lifetime Min/Max Temperature: 13/36 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (443) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x018 6 3574078 --- Logical Sectors Written +0x01 0x020 6 108787 --- Number of Write Commands +0x01 0x028 6 427462764941 --- Logical Sectors Read +0x01 0x030 6 835037472 --- Number of Read Commands +0x01 0x038 6 3528166808 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 20 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/61613691197A b/SSD/Intel/SSDSC2/SSDSC2KB019T7/61613691197A new file mode 100644 index 000000000..c4de1be55 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/61613691197A @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2447 (139 6556) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 17/25) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 74 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275591 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 74 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522603 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 53000 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/25 Celsius +Lifetime Min/Max Temperature: 13/36 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (407) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x018 6 4893139 --- Logical Sectors Written +0x01 0x020 6 166560 --- Number of Write Commands +0x01 0x028 6 427465346297 --- Logical Sectors Read +0x01 0x030 6 835096697 --- Number of Read Commands +0x01 0x038 6 3526077681 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 20 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/7931390E8D60 b/SSD/Intel/SSDSC2/SSDSC2KB019T7/7931390E8D60 new file mode 100644 index 000000000..f718bb8e4 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/7931390E8D60 @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 099 099 000 - 4 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 12 +170 Available_Reservd_Space PO--CK 099 099 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 1 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 10 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2527 (138 6546) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 074 074 000 - 26 (Min/Max 17/26) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 10 +194 Temperature_Celsius -O---K 100 100 000 - 26 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 61 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275590 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 61 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522595 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 52688 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 17/26 Celsius +Lifetime Min/Max Temperature: 13/36 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (392) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x018 6 4005571 --- Logical Sectors Written +0x01 0x020 6 133282 --- Number of Write Commands +0x01 0x028 6 427464806889 --- Logical Sectors Read +0x01 0x030 6 835060221 --- Number of Read Commands +0x01 0x038 6 3525252537 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/A108DC898FEF b/SSD/Intel/SSDSC2/SSDSC2KB019T7/A108DC898FEF new file mode 100644 index 000000000..2bd243357 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/A108DC898FEF @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2478 (139 6555) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 17/25) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 94 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275588 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 94 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522623 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 53015 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/25 Celsius +Lifetime Min/Max Temperature: 13/35 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (404) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x018 6 6225035 --- Logical Sectors Written +0x01 0x020 6 205231 --- Number of Write Commands +0x01 0x028 6 427466621266 --- Logical Sectors Read +0x01 0x030 6 835133615 --- Number of Read Commands +0x01 0x038 6 3525896435 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/A868B70C0D9E b/SSD/Intel/SSDSC2/SSDSC2KB019T7/A868B70C0D9E new file mode 100644 index 000000000..6f0a5710f --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/A868B70C0D9E @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 12 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2467 (140 1426) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 17/25) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 12 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 57 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275622 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 57 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522572 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 52914 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/25 Celsius +Lifetime Min/Max Temperature: 13/35 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (440) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 3743604 --- Logical Sectors Written +0x01 0x020 6 169607 --- Number of Write Commands +0x01 0x028 6 427463336601 --- Logical Sectors Read +0x01 0x030 6 835098976 --- Number of Read Commands +0x01 0x038 6 3527960715 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 21 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 20 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/AC0FEB7FAAE0 b/SSD/Intel/SSDSC2/SSDSC2KB019T7/AC0FEB7FAAE0 new file mode 100644 index 000000000..5d84c8f94 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/AC0FEB7FAAE0 @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2399 (139 6555) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 17/25) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 52 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275592 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 52 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522579 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 52953 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/25 Celsius +Lifetime Min/Max Temperature: 13/35 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (407) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x018 6 3426200 --- Logical Sectors Written +0x01 0x020 6 108615 --- Number of Write Commands +0x01 0x028 6 427463758532 --- Logical Sectors Read +0x01 0x030 6 835042060 --- Number of Read Commands +0x01 0x038 6 3526046795 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 19 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/BC1E111D5764 b/SSD/Intel/SSDSC2/SSDSC2KB019T7/BC1E111D5764 new file mode 100644 index 000000000..61765a287 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/BC1E111D5764 @@ -0,0 +1,217 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21260 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2401 (139 1410) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 17/25) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 47 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275581 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 47 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522568 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 52908 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/25 Celsius +Lifetime Min/Max Temperature: 12/35 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (386) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x018 6 3144105 --- Logical Sectors Written +0x01 0x020 6 1961385 --- Number of Write Commands +0x01 0x028 6 427463020705 --- Logical Sectors Read +0x01 0x030 6 836893044 --- Number of Read Commands +0x01 0x038 6 3524776213 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 17 --- Average Short Term Temperature +0x05 0x018 1 16 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 19 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB019T7/F080A4E55318 b/SSD/Intel/SSDSC2/SSDSC2KB019T7/F080A4E55318 new file mode 100644 index 000000000..8e9a1d200 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB019T7/F080A4E55318 @@ -0,0 +1,215 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB019T7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10142 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 06:33:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21261 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2383 (139 6556) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 074 074 000 - 26 (Min/Max 18/26) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 +194 Temperature_Celsius -O---K 100 100 000 - 26 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 50 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 20 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1275593 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 50 +242 Host_Reads_32MiB -O--CK 100 100 000 - 6522581 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 52984 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 18/26 Celsius +Lifetime Min/Max Temperature: 13/36 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (409) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x018 6 3296080 --- Logical Sectors Written +0x01 0x020 6 124848 --- Number of Write Commands +0x01 0x028 6 427463920402 --- Logical Sectors Read +0x01 0x030 6 835061625 --- Number of Read Commands +0x01 0x038 6 3526136827 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 20 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB240G7/A41046EB2EC7 b/SSD/Intel/SSDSC2/SSDSC2KB240G7/A41046EB2EC7 new file mode 100644 index 000000000..6d8cd94a5 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB240G7/A41046EB2EC7 @@ -0,0 +1,215 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB240G7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10150 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 27 21:26:04 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 50057 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 20 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2661 (348 5906) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 076 074 000 - 24 (Min/Max 13/27) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 20 +194 Temperature_Celsius -O---K 100 100 000 - 24 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3666 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 184 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 98 +228 Workload_Minutes -O--CK 100 100 000 - 3003147 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3666 +242 Host_Reads_32MiB -O--CK 100 100 000 - 234633 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 92500 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 13/27 Celsius +Lifetime Min/Max Temperature: 9/46 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2b 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (308) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 54 --- Lifetime Power-On Resets +0x01 0x018 6 240301879 --- Logical Sectors Written +0x01 0x020 6 5456615 --- Number of Write Commands +0x01 0x028 6 15376950949 --- Logical Sectors Read +0x01 0x030 6 19507158 --- Number of Read Commands +0x01 0x038 6 4114879901 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 15 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 650 --- Number of Hardware Resets +0x06 0x010 4 464 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB240G7/BF8A5A7A079E b/SSD/Intel/SSDSC2/SSDSC2KB240G7/BF8A5A7A079E new file mode 100644 index 000000000..ee18c16d7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB240G7/BF8A5A7A079E @@ -0,0 +1,214 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KB240G7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10121 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 8 15:25:42 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 56020 + 12 Power_Cycle_Count -O--CK 100 100 000 - 44 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 39 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2643 (373 1642) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 073 072 000 - 27 (Min/Max 20/39) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 39 +194 Temperature_Celsius -O---K 100 100 000 - 27 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 218548 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 696 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 43 +228 Workload_Minutes -O--CK 100 100 000 - 3360913 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 218548 +242 Host_Reads_32MiB -O--CK 100 100 000 - 164612 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 383757 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 20/39 Celsius +Lifetime Min/Max Temperature: 11/42 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2a 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (15) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x018 6 14322823672 --- Logical Sectors Written +0x01 0x020 6 369115905 --- Number of Write Commands +0x01 0x028 6 10788062506 --- Logical Sectors Read +0x01 0x030 6 78856918 --- Number of Read Commands +0x01 0x038 6 4103950493 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 28 --- Highest Average Long Term Temperature +0x05 0x048 1 19 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 223 --- Number of Hardware Resets +0x06 0x010 4 162 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 38 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB240G8/16BFCE61C6D4 b/SSD/Intel/SSDSC2/SSDSC2KB240G8/16BFCE61C6D4 new file mode 100644 index 000000000..c22a07f40 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB240G8/16BFCE61C6D4 @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB240G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10110 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 12 10:56:11 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 39781 + 12 Power_Cycle_Count -O--CK 100 100 000 - 76 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 55 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2506 (76 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 071 071 000 - 29 (Min/Max 19/31) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 55 +194 Temperature_Celsius -O---K 100 100 000 - 29 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1219642 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 1832 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 50 +228 Workload_Minutes -O--CK 100 100 000 - 2386560 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2506 (76 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 1219642 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1228974 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 1779462 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 27 - +# 2 Short offline Completed without error 00% 25 - +# 3 Short offline Completed without error 00% 1 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 19/31 Celsius +Lifetime Min/Max Temperature: 9/47 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (346) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x018 6 79930503660 --- Logical Sectors Written +0x01 0x020 6 2067335306 --- Number of Write Commands +0x01 0x028 6 80542058553 --- Logical Sectors Read +0x01 0x030 6 91394419 --- Number of Read Commands +0x01 0x038 6 1479840224 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 210 --- Number of Hardware Resets +0x06 0x010 4 129 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB240G8/18BE1ACB2AAE b/SSD/Intel/SSDSC2/SSDSC2KB240G8/18BE1ACB2AAE new file mode 100644 index 000000000..8a71572e8 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB240G8/18BE1ACB2AAE @@ -0,0 +1,218 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KB240G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10120 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 23 10:56:17 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 47611 + 12 Power_Cycle_Count -O--CK 100 100 000 - 31 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 14 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2547 (31 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 068 068 000 - 32 (Min/Max 22/34) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 14 +194 Temperature_Celsius -O---K 100 100 000 - 32 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1058162 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 2865 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 12 +228 Workload_Minutes -O--CK 100 100 000 - 2856559 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2547 (31 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 1058162 +242 Host_Reads_32MiB -O--CK 100 100 000 - 8020 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 1408652 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 22/34 Celsius +Lifetime Min/Max Temperature: 8/35 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (64) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x018 6 69347720537 --- Logical Sectors Written +0x01 0x020 6 2120031129 --- Number of Write Commands +0x01 0x028 6 525602658 --- Logical Sectors Read +0x01 0x030 6 10186900 --- Number of Read Commands +0x01 0x038 6 3896021162 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 392 --- Number of Hardware Resets +0x06 0x010 4 197 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB480G8/6FDFE7B75078 b/SSD/Intel/SSDSC2/SSDSC2KB480G8/6FDFE7B75078 new file mode 100644 index 000000000..43d000c18 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB480G8/6FDFE7B75078 @@ -0,0 +1,216 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KB480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10100 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 21:00:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 55919 + 12 Power_Cycle_Count -O--CK 100 100 000 - 79 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 64 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2383 (79 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 24/26) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 64 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 252495 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 522 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 92 +228 Workload_Minutes -O--CK 100 100 000 - 3354781 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2383 (79 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 252495 +242 Host_Reads_32MiB -O--CK 100 100 000 - 2946119 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 900421 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 52420 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 24/26 Celsius +Lifetime Min/Max Temperature: 13/33 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (225) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 79 --- Lifetime Power-On Resets +0x01 0x018 6 16547566440 --- Logical Sectors Written +0x01 0x020 6 460071249 --- Number of Write Commands +0x01 0x028 6 193076862581 --- Logical Sectors Read +0x01 0x030 6 57323679 --- Number of Read Commands +0x01 0x038 6 3742438267 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 17 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 404 --- Number of Hardware Resets +0x06 0x010 4 324 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB480G8/9471F30E0777 b/SSD/Intel/SSDSC2/SSDSC2KB480G8/9471F30E0777 new file mode 100644 index 000000000..5ab589c85 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB480G8/9471F30E0777 @@ -0,0 +1,216 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10110 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 11 00:31:28 2025 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 33224 + 12 Power_Cycle_Count -O--CK 100 100 000 - 82 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 66 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2455 (82 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 071 071 000 - 29 (Min/Max 19/30) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 66 +194 Temperature_Celsius -O---K 100 100 000 - 29 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 4543924 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 5396 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 35 +228 Workload_Minutes -O--CK 100 100 000 - 1992930 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2455 (82 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 4543924 +242 Host_Reads_32MiB -O--CK 100 100 000 - 2460695 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 9402377 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 19/30 Celsius +Lifetime Min/Max Temperature: 10/57 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (330) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 82 --- Lifetime Power-On Resets +0x01 0x018 6 297790631878 --- Logical Sectors Written +0x01 0x020 6 3610578517 --- Number of Write Commands +0x01 0x028 6 161264155025 --- Logical Sectors Read +0x01 0x030 6 1716114589 --- Number of Read Commands +0x01 0x038 6 3645324819 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 646 --- Number of Hardware Resets +0x06 0x010 4 474 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB480G8/A642BDBE9517 b/SSD/Intel/SSDSC2/SSDSC2KB480G8/A642BDBE9517 new file mode 100644 index 000000000..62a489c28 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB480G8/A642BDBE9517 @@ -0,0 +1,218 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10132 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 28 10:50:51 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 498 + 12 Power_Cycle_Count -O--CK 100 100 000 - 35 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 24 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2379 (35 29882) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 061 061 000 - 39 (Min/Max 35/40) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 24 +194 Temperature_Celsius -O---K 100 100 000 - 39 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1026 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 29671 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2379 (35 29882) +241 Host_Writes_32MiB -O--CK 100 100 000 - 1026 +242 Host_Reads_32MiB -O--CK 100 100 000 - 168 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 3762 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 35/40 Celsius +Lifetime Min/Max Temperature: 15/42 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (246) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x018 6 67298803 --- Logical Sectors Written +0x01 0x020 6 11902585 --- Number of Write Commands +0x01 0x028 6 11069890 --- Logical Sectors Read +0x01 0x030 6 13069099 --- Number of Read Commands +0x01 0x038 6 1792932785 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 50 --- Number of Hardware Resets +0x06 0x010 4 25 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB480G8/EE027BE1ED31 b/SSD/Intel/SSDSC2/SSDSC2KB480G8/EE027BE1ED31 new file mode 100644 index 000000000..c69b301b5 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB480G8/EE027BE1ED31 @@ -0,0 +1,218 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KB480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10110 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 11 00:31:05 2025 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 72) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 099 099 000 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 33649 + 12 Power_Cycle_Count -O--CK 100 100 000 - 143 +170 Available_Reservd_Space PO--CK 099 099 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 118 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2539 (143 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 075 075 000 - 25 (Min/Max 20/28) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 118 +194 Temperature_Celsius -O---K 100 100 000 - 25 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 4479852 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 6000 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 14 +228 Workload_Minutes -O--CK 100 100 000 - 2017802 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2539 (143 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 4479852 +242 Host_Reads_32MiB -O--CK 100 100 000 - 761340 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 10457950 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 4 - +# 2 Short offline Completed without error 00% 3 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 20/28 Celsius +Lifetime Min/Max Temperature: 10/51 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (77) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 143 --- Lifetime Power-On Resets +0x01 0x018 6 293591632034 --- Logical Sectors Written +0x01 0x020 6 2385764589 --- Number of Write Commands +0x01 0x028 6 49895212501 --- Logical Sectors Read +0x01 0x030 6 292378760 --- Number of Read Commands +0x01 0x038 6 879991608 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 613 --- Number of Hardware Resets +0x06 0x010 4 411 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB480G8R/9F6D211CDD2E b/SSD/Intel/SSDSC2/SSDSC2KB480G8R/9F6D211CDD2E new file mode 100644 index 000000000..140870c57 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB480G8R/9F6D211CDD2E @@ -0,0 +1,209 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs +Device Model: SSDSC2KB480G8R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: XCV1DL69 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 23 20:55:44 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 244) Self-test routine in progress... + 40% of test remaining. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 21221843 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9886 + 12 Power_Cycle_Count -O--CK 100 100 000 - 70 + 13 Read_Soft_Error_Rate -OSRC- 085 085 000 - 29167144128979 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +173 Unknown_Attribute -O--C- 100 100 000 - 15 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 59 +175 Program_Fail_Count_Chip -O--C- 100 100 010 - 14 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 3183 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 27 +195 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Power_Loss_Cap_Test PO--CK 100 100 010 - 2735 (76 1) +202 End_of_Life POS--K 100 100 000 - 0 +233 Total_LBAs_Written -O--CK 100 100 000 - 86646 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Unknown_Attribute PO-R-- 100 100 000 - 86646 +241 Total_LBAs_Written -O--CK 100 100 000 - 86646 +242 Total_LBAs_Read -O--CK 100 100 000 - 2125886 +245 Percent_Life_Remaining -O--CK 100 100 000 - 100 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x99-0x9a GPL,SL R/W 1 Host vendor specific log +0xb8 SL VS 1 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1 - +# 2 Short offline Completed without error 00% 1 - + +Read SMART Selective Self-test Log failed: scsi error aborted command + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 23/28 Celsius +Lifetime Min/Max Temperature: 12/41 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (56) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 70 --- Lifetime Power-On Resets +0x01 0x018 6 5678444581 --- Logical Sectors Written +0x01 0x020 6 129362545 --- Number of Write Commands +0x01 0x028 6 139322122526 --- Logical Sectors Read +0x01 0x030 6 1249578116 --- Number of Read Commands +0x01 0x038 6 1231557679 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 237 --- Number of Hardware Resets +0x06 0x010 4 168 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KB960G8/75958292DF4F b/SSD/Intel/SSDSC2/SSDSC2KB960G8/75958292DF4F new file mode 100644 index 000000000..c4ad32b42 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KB960G8/75958292DF4F @@ -0,0 +1,112 @@ +smartctl 7.5 2025-04-30 r5714 [OpenBSD 7.8 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KB960G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10100 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 25 12:19:36 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7376 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 70 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 22 +175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2575 (70 65535) +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Drive_Temperature 0x0022 077 074 000 Old_age Always - 23 (Min/Max 18/27) +192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 22 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 23 +197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 107922 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 51 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 30 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 442047 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 +234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 +235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2575 (70 65535) +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 107922 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 49330 +243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 208153 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KF128G8 SATA 128GB/17C5B2418737 b/SSD/Intel/SSDSC2/SSDSC2KF128G8 SATA 128GB/17C5B2418737 new file mode 100644 index 000000000..40d6d8452 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KF128G8 SATA 128GB/17C5B2418737 @@ -0,0 +1,203 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KF128G8 SATA 128GB +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFD03N +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 25 19:25:56 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 23063 + 12 Power_Cycle_Count -O--CK 100 100 000 - 159 +170 Unknown_Attribute PO--CK 098 098 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 99 +175 Program_Fail_Count_Chip PO--CK 094 094 010 - 2 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 093 093 005 - 344298 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 091 091 010 - 2 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 099 099 010 - 2 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 098 098 010 - 163 +181 Program_Fail_Cnt_Total PO--CK 099 099 010 - 2 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 027 047 000 - 27 (Min/Max 10/47) +195 Hardware_ECC_Recovered -O--CK 103 103 000 - 5773775 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2210597 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 098 098 010 - 0 +233 Media_Wearout_Indicator -O--CK 033 033 000 - 0 +238 Unknown_Attribute -O--CK 033 033 000 - 0 +236 Unknown_Attribute -O--CK 033 033 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2210597 +242 Host_Reads_32MiB -O--CK 100 100 000 - 643953 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 95861 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 29/34 Celsius +Lifetime Min/Max Temperature: 15/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 159 --- Lifetime Power-On Resets +0x01 0x010 4 23063 --- Power-on Hours +0x01 0x018 6 144873749720 --- Logical Sectors Written +0x01 0x020 6 15221509167 --- Number of Write Commands +0x01 0x028 6 42202141338 --- Logical Sectors Read +0x01 0x030 6 802823305 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 99 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 940 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 48 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KF256G8 SATA 256GB/D28A5EDE3AA4 b/SSD/Intel/SSDSC2/SSDSC2KF256G8 SATA 256GB/D28A5EDE3AA4 new file mode 100644 index 000000000..78840cc9e --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KF256G8 SATA 256GB/D28A5EDE3AA4 @@ -0,0 +1,208 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KF256G8 SATA 256GB +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFD03N +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Apr 5 10:04:15 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6219 + 12 Power_Cycle_Count -O--CK 100 100 000 - 143 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 102 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 095 095 005 - 23743 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 477 +181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 031 037 000 - 31 (Min/Max 2/37) +195 Hardware_ECC_Recovered -O--CK 101 101 000 - 3102391 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 597964 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 089 089 000 - 0 +238 Unknown_Attribute -O--CK 089 089 000 - 0 +236 Unknown_Attribute -O--CK 089 089 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 597964 +242 Host_Reads_32MiB -O--CK 100 100 000 - 272882 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 12230 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4276 - +# 2 Short offline Completed without error 00% 4160 - +# 3 Short offline Completed without error 00% 4044 - +# 4 Short offline Completed without error 00% 3924 - +# 5 Short offline Completed without error 00% 3690 - +# 6 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 31/38 Celsius +Lifetime Min/Max Temperature: 6/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 143 --- Lifetime Power-On Resets +0x01 0x010 4 6219 --- Power-on Hours +0x01 0x018 6 39188173906 --- Logical Sectors Written +0x01 0x020 6 1506925796 --- Number of Write Commands +0x01 0x028 6 17883651381 --- Logical Sectors Read +0x01 0x030 6 279650789 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 102 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1293 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KF256H6L/EB5239B4A88F b/SSD/Intel/SSDSC2/SSDSC2KF256H6L/EB5239B4A88F new file mode 100644 index 000000000..60990b682 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KF256H6L/EB5239B4A88F @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2KF256H6L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LBFL17P +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 15 14:09:54 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 6 + 9 Power_On_Hours -O--CK 100 100 000 - 1197 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1224 +170 Unknown_Attribute PO--CK 100 100 010 - 6 +171 Unknown_Attribute -O--CK 100 100 010 - 0 +172 Unknown_Attribute -O--CK 100 100 010 - 0 +173 Unknown_Attribute -O--CK 100 100 000 - 40 +174 Unknown_Attribute -O--CK 100 100 000 - 49 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 035 054 000 - 35 (Min/Max 22/54) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 49 +194 Temperature_Celsius -O--CK 035 054 000 - 35 (Min/Max 22/54) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 15778 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +228 Power-off_Retract_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator PO--CK 083 083 001 - 0 +236 Unknown_Attribute PO--CK 083 083 001 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 15778 +242 Total_LBAs_Read -O--CK 100 100 000 - 14632 +249 Unknown_Attribute -O--CK 100 100 000 - 7499 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 43/45 Celsius +Lifetime Min/Max Temperature: 28/64 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (70) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1224 --- Lifetime Power-On Resets +0x01 0x010 4 1197 --- Power-on Hours +0x01 0x018 6 33089790334 --- Logical Sectors Written +0x01 0x020 6 886702750 --- Number of Write Commands +0x01 0x028 6 30685889359 --- Logical Sectors Read +0x01 0x030 6 537707162 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 137 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 49 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 45 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 40 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 41 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3253 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KF512G8 SATA 512GB/A39D5B4C2A95 b/SSD/Intel/SSDSC2/SSDSC2KF512G8 SATA 512GB/A39D5B4C2A95 new file mode 100644 index 000000000..8f054ee65 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KF512G8 SATA 512GB/A39D5B4C2A95 @@ -0,0 +1,203 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KF512G8 SATA 512GB +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFD04N +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 23 04:13:45 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 097 097 010 - 13 + 9 Power_On_Hours -O--CK 100 100 000 - 6635 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6773 +170 Unknown_Attribute PO--CK 098 098 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 73 +175 Program_Fail_Count_Chip PO--CK 084 084 010 - 5 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 096 096 005 - 9623 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 087 087 010 - 5 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 099 099 010 - 13 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 098 098 010 - 1122 +181 Program_Fail_Cnt_Total PO--CK 098 098 010 - 13 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 037 050 000 - 37 (Min/Max 15/50) +195 Hardware_ECC_Recovered -O--CK 094 094 000 - 670513 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 779801 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 098 098 010 - 0 +233 Media_Wearout_Indicator -O--CK 093 093 000 - 0 +238 Unknown_Attribute -O--CK 093 093 000 - 0 +236 Unknown_Attribute -O--CK 093 093 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 779801 +242 Host_Reads_32MiB -O--CK 100 100 000 - 432959 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 9985 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 42/45 Celsius +Lifetime Min/Max Temperature: 21/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (62) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6773 --- Lifetime Power-On Resets +0x01 0x010 4 6635 --- Power-on Hours +0x01 0x018 6 51105038503 --- Logical Sectors Written +0x01 0x020 6 1895563250 --- Number of Write Commands +0x01 0x028 6 28374427391 --- Logical Sectors Read +0x01 0x030 6 572809729 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 18 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 73 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 32 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 23 --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48145858 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KF512G8 SATA 512GB/EED43477EBAA b/SSD/Intel/SSDSC2/SSDSC2KF512G8 SATA 512GB/EED43477EBAA new file mode 100644 index 000000000..fc6dec12b --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KF512G8 SATA 512GB/EED43477EBAA @@ -0,0 +1,201 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KF512G8 SATA 512GB +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFD04N +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 23 04:13:45 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 095 095 010 - 24 + 9 Power_On_Hours -O--CK 100 100 000 - 6395 + 12 Power_Cycle_Count -O--CK 100 100 000 - 70157 +170 Unknown_Attribute PO--CK 097 097 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 96 +175 Program_Fail_Count_Chip PO--CK 050 050 010 - 15 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 095 095 005 - 32006 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 062 062 010 - 15 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 098 098 010 - 24 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 097 097 010 - 1130 +181 Program_Fail_Cnt_Total PO--CK 095 095 010 - 24 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 891270 +194 Temperature_Celsius -O--CK 036 063 000 - 36 (Min/Max 13/63) +195 Hardware_ECC_Recovered -O--CK 034 034 000 - 168800805260864 +199 CRC_Error_Count -O--CK 100 100 000 - 1 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3793610 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 097 097 010 - 0 +233 Media_Wearout_Indicator -O--CK 074 074 000 - 0 +238 Unknown_Attribute -O--CK 074 074 000 - 0 +236 Unknown_Attribute -O--CK 074 074 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 3793610 +242 Host_Reads_32MiB -O--CK 100 100 000 - 811721 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 34562 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 44/44 Celsius +Lifetime Min/Max Temperature: 18/74 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (26) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 70157 --- Lifetime Power-On Resets +0x01 0x010 4 6395 --- Power-on Hours +0x01 0x018 6 248618086869 --- Logical Sectors Written +0x01 0x020 6 3621873973 --- Number of Write Commands +0x01 0x028 6 53196973387 --- Logical Sectors Read +0x01 0x030 6 1088845021 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 76 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 96 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 29 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 211610 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG019T8/847DD283C75F b/SSD/Intel/SSDSC2/SSDSC2KG019T8/847DD283C75F new file mode 100644 index 000000000..f798f5931 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG019T8/847DD283C75F @@ -0,0 +1,218 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG019T8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10110 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 21:07:07 2025 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 869 + 12 Power_Cycle_Count -O--CK 100 100 000 - 12 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 3 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2517 (12 52170) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 061 061 000 - 39 (Min/Max 24/39) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 3 +194 Temperature_Celsius -O---K 100 100 000 - 39 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1904 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2517 (12 52170) +241 Host_Writes_32MiB -O--CK 100 100 000 - 1904 +242 Host_Reads_32MiB -O--CK 100 100 000 - 179 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 13038 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 24/39 Celsius +Lifetime Min/Max Temperature: 22/42 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (80) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x018 6 124805643 --- Logical Sectors Written +0x01 0x020 6 2674849 --- Number of Write Commands +0x01 0x028 6 11785768 --- Logical Sectors Read +0x01 0x030 6 496089 --- Number of Read Commands +0x01 0x038 6 3130259801 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 32 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 66 --- Number of Hardware Resets +0x06 0x010 4 65 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG019T8/9BE759262147 b/SSD/Intel/SSDSC2/SSDSC2KG019T8/9BE759262147 new file mode 100644 index 000000000..a8f30eade --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG019T8/9BE759262147 @@ -0,0 +1,223 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG019T8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10132 +User Capacity: 1,920,383,410,176 bytes [1.92 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu May 15 21:07:07 2025 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 288) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 880 + 12 Power_Cycle_Count -O--CK 100 100 000 - 46 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 34 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2389 (46 52856) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 060 060 000 - 40 (Min/Max 24/40) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 34 +194 Temperature_Celsius -O---K 100 100 000 - 40 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2249 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 8 +228 Workload_Minutes -O--CK 100 100 000 - 52591 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2389 (46 52856) +241 Host_Writes_32MiB -O--CK 100 100 000 - 2249 +242 Host_Reads_32MiB -O--CK 100 100 000 - 58072 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 18548 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Conveyance offline Completed without error 00% 3 - +# 2 Short offline Completed without error 00% 3 - +# 3 Short offline Completed without error 00% 3 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 24/40 Celsius +Lifetime Min/Max Temperature: 14/45 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (250) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x018 6 147408712 --- Logical Sectors Written +0x01 0x020 6 14892634 --- Number of Write Commands +0x01 0x028 6 3805832421 --- Logical Sectors Read +0x01 0x030 6 15566450 --- Number of Read Commands +0x01 0x038 6 3171393283 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 35 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 109 --- Number of Hardware Resets +0x06 0x010 4 108 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G7/386F3E21FF63 b/SSD/Intel/SSDSC2/SSDSC2KG480G7/386F3E21FF63 new file mode 100644 index 000000000..73d0c9f43 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G7/386F3E21FF63 @@ -0,0 +1,216 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KG480G7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10121 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 22 10:49:36 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 099 099 000 - 8 + 9 Power_On_Hours -O--CK 100 100 000 - 62161 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +170 Available_Reservd_Space PO--CK 099 099 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 3 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 18 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2533 (399 5878) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 067 062 000 - 33 (Min/Max 29/42) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 18 +194 Temperature_Celsius -O---K 100 100 000 - 33 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2076374 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 2252 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 3729452 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2076374 +242 Host_Reads_32MiB -O--CK 100 100 000 - 4802 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 3003870 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 48177 - +# 2 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/42 Celsius +Lifetime Min/Max Temperature: 18/48 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (440) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x018 6 136077273350 --- Logical Sectors Written +0x01 0x020 6 1444351330 --- Number of Write Commands +0x01 0x028 6 314761549 --- Logical Sectors Read +0x01 0x030 6 6707740 --- Number of Read Commands +0x01 0x038 6 443803177 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 309 --- Number of Hardware Resets +0x06 0x010 4 211 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 115 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G7/DDD928B870D7 b/SSD/Intel/SSDSC2/SSDSC2KG480G7/DDD928B870D7 new file mode 100644 index 000000000..44dee9632 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G7/DDD928B870D7 @@ -0,0 +1,214 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG480G7 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: SCV10100 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Apr 27 08:03:33 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17415 + 12 Power_Cycle_Count -O--CK 100 100 000 - 71 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 57 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 26 (175 6587) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 057 057 000 - 43 (Min/Max 34/47) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 57 +194 Temperature_Celsius -O---K 100 100 000 - 43 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 775342 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 716 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 6 +228 Workload_Minutes -O--CK 100 100 000 - 1044604 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 775342 +242 Host_Reads_32MiB -O--CK 100 100 000 - 55810 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 999119 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3312 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 34/47 Celsius +Lifetime Min/Max Temperature: 10/55 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (95) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 71 --- Lifetime Power-On Resets +0x01 0x018 6 50812838995 --- Logical Sectors Written +0x01 0x020 6 580879872 --- Number of Write Commands +0x01 0x028 6 3657565078 --- Logical Sectors Read +0x01 0x030 6 50800266 --- Number of Read Commands +0x01 0x038 6 2566544918 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 85 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G7R/B806B856B0C1 b/SSD/Intel/SSDSC2/SSDSC2KG480G7R/B806B856B0C1 new file mode 100644 index 000000000..c10fb4979 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G7R/B806B856B0C1 @@ -0,0 +1,215 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs +Device Model: SSDSC2KG480G7R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: SCV1DL5C +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 29 08:35:14 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 13777985 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46546 + 12 Power_Cycle_Count -O--CK 100 100 000 - 39 + 13 Read_Soft_Error_Rate -OSRC- 095 095 000 - 6558428838977 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 30 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 17577 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 29 +195 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Power_Loss_Cap_Test PO--CK 100 100 010 - 2519 (315 2471) +202 End_of_Life POS--K 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 973657 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 1904 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 82 +228 Workload_Minutes -O--CK 100 100 000 - 2792571 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Total_LBAs_Written -O--CK 100 100 000 - 973657 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +241 Total_LBAs_Written -O--CK 100 100 000 - 973657 +242 Total_LBAs_Read -O--CK 100 100 000 - 4520135 +245 Percent_Life_Remaining -O--CK 099 099 000 - 99 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x99-0x9a GPL,SL R/W 1 Host vendor specific log +0xb8 SL VS 1 Device vendor specific log +0xb9 SL VS 240 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 44431 - +# 2 Extended offline Aborted by host 00% 44431 - +# 3 Extended offline Completed without error 00% 1 - +# 4 Short offline Aborted by host 00% 1 - +# 5 Short offline Completed without error 00% 1 - +# 6 Vendor (0x40) Aborted by host 00% 1 - + +Read SMART Selective Self-test Log failed: Input/output error + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 19/31 Celsius +Lifetime Min/Max Temperature: 3/35 Celsius +Specified Max Operating Temperature: 75 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 29 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/75 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (382) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 39 --- Lifetime Power-On Resets +0x01 0x018 6 63809631517 --- Logical Sectors Written +0x01 0x020 6 626784545 --- Number of Write Commands +0x01 0x028 6 296231605006 --- Logical Sectors Read +0x01 0x030 6 1291624041 --- Number of Read Commands +0x01 0x038 6 62651556 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 30 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 27 --- Highest Average Long Term Temperature +0x05 0x048 1 21 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 75 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 815 --- Number of Hardware Resets +0x06 0x010 4 761 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 69 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G8/237422A2C07D b/SSD/Intel/SSDSC2/SSDSC2KG480G8/237422A2C07D new file mode 100644 index 000000000..637cf1e47 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G8/237422A2C07D @@ -0,0 +1,220 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10120 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 28 10:50:51 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 19027 + 12 Power_Cycle_Count -O--CK 100 100 000 - 84 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 71 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2565 (84 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 061 061 000 - 39 (Min/Max 33/40) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 71 +194 Temperature_Celsius -O---K 100 100 000 - 39 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 80842 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 112 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 95 +228 Workload_Minutes -O--CK 100 100 000 - 1141023 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2565 (84 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 80842 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1620489 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 251739 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 33/40 Celsius +Lifetime Min/Max Temperature: 9/41 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (299) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 84 --- Lifetime Power-On Resets +0x01 0x018 6 5298086741 --- Logical Sectors Written +0x01 0x020 6 179228917 --- Number of Write Commands +0x01 0x028 6 106200381122 --- Logical Sectors Read +0x01 0x030 6 843694281 --- Number of Read Commands +0x01 0x038 6 4074793327 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 230 --- Number of Hardware Resets +0x06 0x010 4 159 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480GZ/3BAAA8AB1E40 b/SSD/Intel/SSDSC2/SSDSC2KG480GZ/3BAAA8AB1E40 new file mode 100644 index 000000000..e633b6a50 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480GZ/3BAAA8AB1E40 @@ -0,0 +1,224 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KG480GZ +Serial Number: -- +LU WWN Device Id: 5 c8d6b7 ... +Firmware Version: 7CV10130 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 19 19:25:19 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 037 037 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6757 + 12 Power_Cycle_Count -O--CK 100 100 000 - 48 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 41 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2146 (48 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 080 068 000 - 20 (Min/Max 16/34) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 41 +194 Temperature_Celsius -O---K 100 100 000 - 20 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 249808 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 153 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 8 +228 Workload_Minutes -O--CK 100 100 000 - 405021 +229 Unknown_Attribute -O--CK 100 100 000 - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2146 (48 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 249808 +242 Host_Reads_32MiB -O--CK 100 100 000 - 22975 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 423344 +246 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3712 Device vendor specific log +0xb9 SL VS 128 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8-0xc9 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer +0xf6 GPL,SL - 19 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 189 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 20 Celsius +Power Cycle Min/Max Temperature: 16/34 Celsius +Lifetime Min/Max Temperature: 15/34 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (340) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x018 6 16371471577 --- Logical Sectors Written +0x01 0x020 6 274577744 --- Number of Write Commands +0x01 0x028 6 1505742556 --- Logical Sectors Read +0x01 0x030 6 162676608 --- Number of Read Commands +0x01 0x038 6 2851202212 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x010 1 19 --- Average Short Term Temperature +0x05 0x018 1 19 --- Average Long Term Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 621 --- Number of Hardware Resets +0x06 0x010 4 416 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480GZ/9977687BD53C b/SSD/Intel/SSDSC2/SSDSC2KG480GZ/9977687BD53C new file mode 100644 index 000000000..4322a406c --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480GZ/9977687BD53C @@ -0,0 +1,258 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSC2KG480GZ +Serial Number: -- +LU WWN Device Id: 5 c8d6b7 ... +Firmware Version: 7CV10130 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 19 19:25:19 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 038 038 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6757 + 12 Power_Cycle_Count -O--CK 100 100 000 - 48 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 41 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2156 (48 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 080 067 000 - 20 (Min/Max 16/34) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 41 +194 Temperature_Celsius -O---K 100 100 000 - 20 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 1 +225 Host_Writes_32MiB -O--CK 100 100 000 - 239182 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 153 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 11 +228 Workload_Minutes -O--CK 100 100 000 - 405023 +229 Unknown_Attribute -O--CK 100 100 000 - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2156 (48 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 239182 +242 Host_Reads_32MiB -O--CK 100 100 000 - 34057 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 407404 +246 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3712 Device vendor specific log +0xb9 SL VS 128 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8-0xc9 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer +0xf6 GPL,SL - 19 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 1545 hours (64 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 18 00 00 1a 94 a0 20 40 00 Error: ICRC, ABRT at LBA = 0x1a94a020 = 445947936 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 f8 00 18 00 00 1a 94 a0 20 40 00 10d+07:23:51.899 WRITE FPDMA QUEUED + 61 00 f8 00 20 00 00 1a 94 a1 20 40 00 10d+07:23:51.899 WRITE FPDMA QUEUED + 61 00 f8 00 10 00 00 1a 94 9f 20 40 00 10d+07:23:51.899 WRITE FPDMA QUEUED + 61 00 f8 00 28 00 00 1a 94 a2 20 40 00 10d+07:23:51.899 WRITE FPDMA QUEUED + 61 01 00 00 08 00 00 00 79 91 08 40 00 10d+07:23:51.899 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 189 - +# 2 Short offline Completed without error 00% 189 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 20 Celsius +Power Cycle Min/Max Temperature: 16/34 Celsius +Lifetime Min/Max Temperature: 15/34 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (340) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x018 6 15675056192 --- Logical Sectors Written +0x01 0x020 6 272865006 --- Number of Write Commands +0x01 0x028 6 2231969915 --- Logical Sectors Read +0x01 0x030 6 162141929 --- Number of Read Commands +0x01 0x038 6 2851278862 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x010 1 20 --- Average Short Term Temperature +0x05 0x018 1 19 --- Average Long Term Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 17 --- Lowest Average Short Term Temperature +0x05 0x040 1 20 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 592 --- Number of Hardware Resets +0x06 0x010 4 406 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KI128G8/1C57D8DCB665 b/SSD/Intel/SSDSC2/SSDSC2KI128G8/1C57D8DCB665 new file mode 100644 index 000000000..a6d2e7fdc --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KI128G8/1C57D8DCB665 @@ -0,0 +1,197 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2KI128G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHF002D +User Capacity: 72,000,000,512 bytes [72.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 22 14:22:16 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3749 + 12 Power_Cycle_Count -O--CK 100 100 000 - 86 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 092 092 005 - 523996299323 +174 Unknown_Attribute -O--CK 100 100 000 - 74 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 025 041 000 - 25 (Min/Max 21/41) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 74 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 363187 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +228 Power-off_Retract_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 086 086 000 - 0 +236 Unknown_Attribute -O--CK 086 086 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 363187 +242 Total_LBAs_Read -O--CK 100 100 000 - 75473 +249 Unknown_Attribute -O--CK 100 100 000 - 16220 +252 Unknown_Attribute -O--CK 100 100 000 - 122 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 10561756848453896906 11863882167472485106 Not_testing + 2 2966111554234383484 14612614465981833183 Not_testing + 3 17506084508177610551 8970121828470721933 Not_testing + 4 16131772445420823331 3978829821956278344 Not_testing + 5 10199853987589214802 2531949098379416724 Not_testing +25186 14323353117172533898 14323353117172599433 Read_scanning was never started +Selective self-test flags (0xe3e3): + After scanning selected spans, read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 55512 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 27/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (111) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 86 --- Lifetime Power-On Resets +0x01 0x010 4 3749 --- Power-on Hours +0x01 0x018 6 23801846065 --- Logical Sectors Written +0x01 0x020 6 307197098 --- Number of Write Commands +0x01 0x028 6 4946201818 --- Logical Sectors Read +0x01 0x030 6 77014490 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 74 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 31 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 322 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KI128G8/5DAFE246D643 b/SSD/Intel/SSDSC2/SSDSC2KI128G8/5DAFE246D643 new file mode 100644 index 000000000..237c80c77 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KI128G8/5DAFE246D643 @@ -0,0 +1,194 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2KI128G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHF001D +User Capacity: 80,000,000,512 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Dec 5 17:23:20 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 298 + 12 Power_Cycle_Count -O--CK 100 100 000 - 100 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 099 099 005 - 85903540227 +174 Unknown_Attribute -O--CK 100 100 000 - 89 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 039 039 000 - 39 (Min/Max 14/39) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 89 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 31671 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +228 Power-off_Retract_Count -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +236 Unknown_Attribute -O--CK 099 099 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 31671 +242 Total_LBAs_Read -O--CK 100 100 000 - 1765 +249 Unknown_Attribute -O--CK 100 100 000 - 2392 +252 Unknown_Attribute -O--CK 100 100 000 - 20 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 42/47 Celsius +Lifetime Min/Max Temperature: 19/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (75) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 100 --- Lifetime Power-On Resets +0x01 0x010 4 298 --- Power-on Hours +0x01 0x018 6 2075649524 --- Logical Sectors Written +0x01 0x020 6 46809598 --- Number of Write Commands +0x01 0x028 6 115694180 --- Logical Sectors Read +0x01 0x030 6 2898873 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 89 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 44 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 43 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 44 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 377 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KW128G8/00D01CEDE73E b/SSD/Intel/SSDSC2/SSDSC2KW128G8/00D01CEDE73E new file mode 100644 index 000000000..bd6f4feb1 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KW128G8/00D01CEDE73E @@ -0,0 +1,218 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KW128G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHF004C +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 22 10:30:22 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 21817 + 12 Power_Cycle_Count -O--CK 100 100 000 - 211 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 085 085 005 - 1022218141842 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 153 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O--CK 037 044 000 - 37 (Min/Max 12/44) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 153 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 825631 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 064 064 000 - 0 +236 Unknown_Attribute -O--CK 064 064 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 825631 +242 Host_Reads_32MiB -O--CK 100 100 000 - 13292 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 31737 +252 Unknown_Attribute -O--CK 100 100 000 - 238 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10201 - +# 2 Extended offline Completed without error 00% 10034 - +# 3 Extended offline Completed without error 00% 9866 - +# 4 Extended offline Completed without error 00% 9699 - +# 5 Extended offline Completed without error 00% 9531 - +# 6 Extended offline Completed without error 00% 9363 - +# 7 Extended offline Completed without error 00% 9196 - +# 8 Extended offline Completed without error 00% 9028 - +# 9 Extended offline Completed without error 00% 8860 - +#10 Extended offline Completed without error 00% 8693 - +#11 Extended offline Completed without error 00% 8525 - +#12 Extended offline Completed without error 00% 8358 - +#13 Extended offline Completed without error 00% 8046 - +#14 Extended offline Completed without error 00% 7877 - +#15 Extended offline Completed without error 00% 7708 - +#16 Extended offline Completed without error 00% 7561 - +#17 Extended offline Completed without error 00% 7402 - +#18 Extended offline Completed without error 00% 7244 - +#19 Extended offline Completed without error 00% 7091 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/47 Celsius +Lifetime Min/Max Temperature: 17/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (64) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 211 --- Lifetime Power-On Resets +0x01 0x010 4 21817 --- Power-on Hours +0x01 0x018 6 54108559227 --- Logical Sectors Written +0x01 0x020 6 2268813819 --- Number of Write Commands +0x01 0x028 6 871144317 --- Logical Sectors Read +0x01 0x030 6 9475802 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 153 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 844 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KW180H6/2B11CC1BA6E7 b/SSD/Intel/SSDSC2/SSDSC2KW180H6/2B11CC1BA6E7 new file mode 100644 index 000000000..5c67eabc3 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KW180H6/2B11CC1BA6E7 @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 540 Series SSDs +Device Model: INTEL SSDSC2KW180H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LSF036C +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 17 16:57:32 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 8 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 8805h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 109 +170 Available_Reservd_Space PO--CK 099 099 010 - 0 +171 Program_Fail_Count -O--CK 100 100 010 - 0 +172 Erase_Fail_Count -O--CK 100 100 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 65 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 1 +190 Airflow_Temperature_Cel -O--CK 037 047 000 - 37 (Min/Max 15/47) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 65 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 3824826 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 001 001 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 3824826 +242 Total_LBAs_Read -O--CK 100 100 000 - 811792 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 158007 +252 Unknown_Attribute -O--CK 100 100 000 - 857 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 8011 - +# 2 Short offline Completed without error 00% 7912 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 70403103932424 70403103932424 Not_testing + 2 70403103932424 70403103932424 Not_testing + 3 70403103932424 70403103932424 Not_testing + 4 70403103932424 70403103932424 Not_testing + 5 70403103932424 70403103932424 Not_testing +Selective self-test flags (0x4008): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 45/45 Celsius +Lifetime Min/Max Temperature: 20/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (104) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 109 --- Lifetime Power-On Resets +0x01 0x010 4 8805 --- Power-on Hours +0x01 0x018 6 250663828516 --- Logical Sectors Written +0x01 0x020 6 4415884214 --- Number of Write Commands +0x01 0x028 6 53201645083 --- Logical Sectors Read +0x01 0x030 6 557819907 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 8 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 65 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 75 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 49 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2374 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 85 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 84 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KW180H6/E84354BC2023 b/SSD/Intel/SSDSC2/SSDSC2KW180H6/E84354BC2023 new file mode 100644 index 000000000..99944ba48 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KW180H6/E84354BC2023 @@ -0,0 +1,195 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 540 Series SSDs +Device Model: INTEL SSDSC2KW180H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LSBG200 +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 6 16:47:06 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 228 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 1989h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 45 +170 Available_Reservd_Space PO--CK 099 099 010 - 0 +171 Program_Fail_Count -O--CK 100 100 010 - 0 +172 Erase_Fail_Count -O--CK 100 100 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 35 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 405 +190 Airflow_Temperature_Cel -O--CK 041 042 000 - 41 (Min/Max 28/42) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 35 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1561405 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 081 081 010 - 0 +233 Media_Wearout_Indicator -O--CK 046 046 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1561405 +242 Total_LBAs_Read -O--CK 100 100 000 - 208261 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 37539 +252 Unknown_Attribute -O--CK 100 100 000 - 243 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 70403103932424 70403103932424 Not_testing + 2 70403103932424 70403103932424 Not_testing + 3 70403103932424 70403103932424 Not_testing + 4 70403103932424 70403103932424 Not_testing + 5 70403103932424 70403103932424 Not_testing +Selective self-test flags (0x4008): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 42/50 Celsius +Lifetime Min/Max Temperature: 35/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (111) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x010 4 1989 --- Power-on Hours +0x01 0x018 6 102328244177 --- Logical Sectors Written +0x01 0x020 6 1629167536 --- Number of Write Commands +0x01 0x028 6 13648652864 --- Logical Sectors Read +0x01 0x030 6 126489595 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 100 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 35 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 45 --- Average Short Term Temperature +0x05 0x018 1 44 --- Average Long Term Temperature +0x05 0x020 1 77 --- Highest Temperature +0x05 0x028 1 41 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 41 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 405 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 24 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 25 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSC2/SSDSC2KW256G8/99DBCF3977D5 b/SSD/Intel/SSDSC2/SSDSC2KW256G8/99DBCF3977D5 new file mode 100644 index 000000000..afb22d648 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KW256G8/99DBCF3977D5 @@ -0,0 +1,197 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KW256G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHF004C +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 14 02:49:23 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 21739 + 12 Power_Cycle_Count -O--CK 100 100 000 - 213 +170 Unknown_Attribute PO--CK 099 099 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 098 098 005 - 188983738377 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 190 +183 SATA_Downshift_Count -O--CK 100 100 000 - 21 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O--CK 027 049 000 - 27 (Min/Max 19/49) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 190 +199 CRC_Error_Count -O--CK 100 100 000 - 2123 +225 Host_Writes_32MiB -O--CK 100 100 000 - 496551 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 090 090 000 - 0 +236 Unknown_Attribute -O--CK 090 090 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 496551 +242 Host_Reads_32MiB -O--CK 100 100 000 - 60382 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 11545 +252 Unknown_Attribute -O--CK 100 100 000 - 44 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 31/34 Celsius +Lifetime Min/Max Temperature: 25/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (13) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 213 --- Lifetime Power-On Resets +0x01 0x010 4 21739 --- Power-on Hours +0x01 0x018 6 32542018431 --- Logical Sectors Written +0x01 0x020 6 385884327 --- Number of Write Commands +0x01 0x028 6 3957241037 --- Logical Sectors Read +0x01 0x030 6 79913858 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 190 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 31 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2215 --- Number of Hardware Resets +0x06 0x018 4 2123 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KW256G8/EFD38EDFDBE2 b/SSD/Intel/SSDSC2/SSDSC2KW256G8/EFD38EDFDBE2 new file mode 100644 index 000000000..b1a940f0e --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KW256G8/EFD38EDFDBE2 @@ -0,0 +1,198 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSC2KW256G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHF004C +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 6 00:30:52 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1618 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1440 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 099 099 005 - 107379228685 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 106 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O--CK 039 048 000 - 39 (Min/Max 15/48) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 106 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 241201 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +236 Unknown_Attribute -O--CK 098 098 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 241201 +242 Host_Reads_32MiB -O--CK 100 100 000 - 253830 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 6451 +252 Unknown_Attribute -O--CK 100 100 000 - 25 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 10561756848453896906 11863882167472485106 Not_testing + 2 2966111554234383484 14612614465981833183 Not_testing + 3 17506084508177610551 8970121828470721933 Not_testing + 4 16131772445420823331 3978829821956278344 Not_testing + 5 10199853987589214802 2531949098379416724 Not_testing +25186 14323353117172533898 14323353117172599433 Read_scanning was never started +Selective self-test flags (0xe3e3): + After scanning selected spans, read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 55512 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 41/47 Celsius +Lifetime Min/Max Temperature: 21/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (56) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1440 --- Lifetime Power-On Resets +0x01 0x010 4 1618 --- Power-on Hours +0x01 0x018 6 15807414224 --- Logical Sectors Written +0x01 0x020 6 166689887 --- Number of Write Commands +0x01 0x028 6 16635038873 --- Logical Sectors Read +0x01 0x030 6 338946363 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 106 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4478 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSCKJF240/SSDSCKJF240A5L/F40CFBCFBD57 b/SSD/Intel/SSDSCKJF240/SSDSCKJF240A5L/F40CFBCFBD57 new file mode 100644 index 000000000..d5d717154 --- /dev/null +++ b/SSD/Intel/SSDSCKJF240/SSDSCKJF240A5L/F40CFBCFBD57 @@ -0,0 +1,103 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSCKJF240A5L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LT2i +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 22 12:39:57 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3442 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2834 +170 Unknown_Attribute 0x0033 094 100 010 Pre-fail Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 33 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 049 100 000 Old_age Always - 49 (Min/Max -21/73) +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 33 +194 Temperature_Celsius 0x0032 049 100 000 Old_age Always - 49 (Min/Max -21/73) +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 533808 +226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 65535 +227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 62 +228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535 +232 Available_Reservd_Space 0x0033 094 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 052 100 000 Old_age Always - 0 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 533808 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 897116 +249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 178425 + +SMART Error Log not supported + +SMART Self-test Log not supported + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Intel/SSDSCKKB240/SSDSCKKB240GZ/3EECCD4D68C6 b/SSD/Intel/SSDSCKKB240/SSDSCKKB240GZ/3EECCD4D68C6 new file mode 100644 index 000000000..3ad3d1f1c --- /dev/null +++ b/SSD/Intel/SSDSCKKB240/SSDSCKKB240GZ/3EECCD4D68C6 @@ -0,0 +1,223 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSCKKB240GZ +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 7CV10111 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 16 11:44:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 060 060 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 18535 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 17 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2267 (23 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 067 063 000 - 33 (Min/Max 28/40) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 17 +194 Temperature_Celsius -O---K 100 100 000 - 33 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 104192 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 225 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 6 +228 Workload_Minutes -O--CK 100 100 000 - 1112027 +229 Unknown_Attribute -O--CK 100 100 000 - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2267 (23 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 104192 +242 Host_Reads_32MiB -O--CK 100 100 000 - 7766 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 299569 +246 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3712 Device vendor specific log +0xb9 SL VS 128 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8-0xc9 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer +0xf6 GPL,SL - 19 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/40 Celsius +Lifetime Min/Max Temperature: 13/43 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (49) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x018 6 6828359217 --- Logical Sectors Written +0x01 0x020 6 129666364 --- Number of Write Commands +0x01 0x028 6 508997445 --- Logical Sectors Read +0x01 0x030 6 70617828 --- Number of Read Commands +0x01 0x038 6 2302372444 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 29 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 258 --- Number of Hardware Resets +0x06 0x010 4 197 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 92 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSCKKB240/SSDSCKKB240GZ/90EB0E67FE83 b/SSD/Intel/SSDSCKKB240/SSDSCKKB240GZ/90EB0E67FE83 new file mode 100644 index 000000000..fce35138d --- /dev/null +++ b/SSD/Intel/SSDSCKKB240/SSDSCKKB240GZ/90EB0E67FE83 @@ -0,0 +1,225 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs +Device Model: INTEL SSDSCKKB240GZ +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 7CV10111 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 16 11:44:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 059 059 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 18534 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 17 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2297 (23 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 068 064 000 - 32 (Min/Max 28/39) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 17 +194 Temperature_Celsius -O---K 100 100 000 - 32 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 226051 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 368 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 3 +228 Workload_Minutes -O--CK 100 100 000 - 1112005 +229 Unknown_Attribute -O--CK 100 100 000 - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2297 (23 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 226051 +242 Host_Reads_32MiB -O--CK 100 100 000 - 8440 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 492213 +246 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3712 Device vendor specific log +0xb9 SL VS 128 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8-0xc9 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer +0xf6 GPL,SL - 19 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/39 Celsius +Lifetime Min/Max Temperature: 13/41 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (51) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x018 6 14814494101 --- Logical Sectors Written +0x01 0x020 6 259278704 --- Number of Write Commands +0x01 0x028 6 553159185 --- Logical Sectors Read +0x01 0x030 6 71987039 --- Number of Read Commands +0x01 0x038 6 2301242182 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 28 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5777 --- Number of Hardware Resets +0x06 0x010 4 369 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 92 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSCKKF128/SSDSCKKF128G8 SATA 128GB/6DA9D65720FF b/SSD/Intel/SSDSCKKF128/SSDSCKKF128G8 SATA 128GB/6DA9D65720FF new file mode 100644 index 000000000..07fd04b7c --- /dev/null +++ b/SSD/Intel/SSDSCKKF128/SSDSCKKF128G8 SATA 128GB/6DA9D65720FF @@ -0,0 +1,202 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSCKKF128G8 SATA 128GB +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFD04N +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 9 18:07:48 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1323 + 12 Power_Cycle_Count -O--CK 100 100 000 - 452 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 40 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 099 099 005 - 1503 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 204 +181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 053 070 000 - 53 (Min/Max 19/70) +195 Hardware_ECC_Recovered -O--CK 098 098 000 - 1601213 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 11751 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +238 Unknown_Attribute -O--CK 100 100 000 - 0 +236 Unknown_Attribute -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 11751 +242 Host_Reads_32MiB -O--CK 100 100 000 - 18868 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 475 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 1312 - +# 2 Short offline Completed without error 00% 24 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 66 Celsius +Power Cycle Min/Max Temperature: 45/66 Celsius +Lifetime Min/Max Temperature: 26/86 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (97) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 452 --- Lifetime Power-On Resets +0x01 0x010 4 1323 --- Power-on Hours +0x01 0x018 6 770116031 --- Logical Sectors Written +0x01 0x020 6 9623537 --- Number of Write Commands +0x01 0x028 6 1236568386 --- Logical Sectors Read +0x01 0x030 6 17014594 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 40 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 66 --- Current Temperature +0x05 0x010 1 46 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 74 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x05 0x030 1 64 --- Highest Average Short Term Temperature +0x05 0x038 1 43 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2034 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSCKKF128/SSDSCKKF128G8 SATA 128GB/72804F4F2A5C b/SSD/Intel/SSDSCKKF128/SSDSCKKF128G8 SATA 128GB/72804F4F2A5C new file mode 100644 index 000000000..b7ca061bd --- /dev/null +++ b/SSD/Intel/SSDSCKKF128/SSDSCKKF128G8 SATA 128GB/72804F4F2A5C @@ -0,0 +1,214 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSCKKF128G8 SATA 128GB +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFD05N +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 23 10:31:05 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 336 + 12 Power_Cycle_Count -O--CK 100 100 000 - 375 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 49 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 094 094 005 - 23068 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 183 +181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +183 SATA_Downshift_Count -O--CK 100 100 000 - 1 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 050 070 000 - 50 (Min/Max 12/70) +195 Hardware_ECC_Recovered -O--CK 099 099 000 - 2136720 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 164550 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 +228 Workload_Minutes -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 095 095 000 - 0 +238 Unknown_Attribute -O--CK 095 095 000 - 0 +236 Unknown_Attribute -O--CK 095 095 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 164550 +242 Host_Reads_32MiB -O--CK 100 100 000 - 163467 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 6523 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 301 - +# 2 Short offline Completed without error 00% 243 - +# 3 Short offline Completed without error 00% 173 - +# 4 Short offline Completed without error 00% 123 - +# 5 Short offline Completed without error 00% 106 - +# 6 Short offline Completed without error 00% 105 - +# 7 Short offline Completed without error 00% 79 - +# 8 Short offline Completed without error 00% 62 - +# 9 Short offline Completed without error 00% 45 - +#10 Short offline Completed without error 00% 16 - +#11 Short offline Completed without error 00% 2 - +#12 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 62 Celsius +Power Cycle Min/Max Temperature: 52/62 Celsius +Lifetime Min/Max Temperature: 17/86 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (81) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 375 --- Lifetime Power-On Resets +0x01 0x010 4 336 --- Power-on Hours +0x01 0x018 6 10783988841 --- Logical Sectors Written +0x01 0x020 6 214823350 --- Number of Write Commands +0x01 0x028 6 10712985969 --- Logical Sectors Read +0x01 0x030 6 114023443 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 49 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 62 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 59 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1461 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/SSDSCKKF256/SSDSCKKF256G8H/0880332C87D5 b/SSD/Intel/SSDSCKKF256/SSDSCKKF256G8H/0880332C87D5 new file mode 100644 index 000000000..fbeb85599 --- /dev/null +++ b/SSD/Intel/SSDSCKKF256/SSDSCKKF256G8H/0880332C87D5 @@ -0,0 +1,194 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 545s Series SSDs +Device Model: INTEL SSDSCKKF256G8H +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LHFH03N +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 11 14:22:10 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0x0001 +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 100) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 002 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8167 + 12 Power_Cycle_Count -O--CK 100 100 000 - 589 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 095 095 005 - 356490149914 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 228 +176 Erase_Fail_Count_Chip -O---K 100 100 000 - 438 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 029 071 000 - 29 (Min/Max 21/29) +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 CRC_Error_Count -O--CK 100 100 000 - 0 +201 Unknown_SSD_Attribute PO---K 083 083 005 - 83 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1097805 +242 Host_Reads_32MiB -O--CK 100 100 000 - 1142020 +243 Unknown_Attribute -O--CK 100 100 000 - 1494133 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6292 - +# 2 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 28/38 Celsius +Lifetime Min/Max Temperature: 19/87 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 589 --- Lifetime Power-On Resets +0x01 0x010 4 8167 --- Power-on Hours +0x01 0x018 6 71945787873 --- Logical Sectors Written +0x01 0x020 6 1554397363 --- Number of Write Commands +0x01 0x028 6 74843439804 --- Logical Sectors Read +0x01 0x030 6 1727116316 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 228 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 69 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 85 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5328 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0005 2 0 R_ERR response for non-data FIS +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intel/TK0120/TK0120GDJXT/10193768F865 b/SSD/Intel/TK0120/TK0120GDJXT/10193768F865 new file mode 100644 index 000000000..f7c0bb8ce --- /dev/null +++ b/SSD/Intel/TK0120/TK0120GDJXT/10193768F865 @@ -0,0 +1,220 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TK0120GDJXT +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWBHPG1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 4 08:26:43 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 12619948 + 5 Reallocated_Sector_Ct PO--CK 096 096 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 25046 +173 Unknown_Attribute PO--CK 099 099 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 622848115326 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 13650276 +194 Temperature_Celsius -O---K 100 100 000 - 19 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25042 - +# 2 Short offline Completed without error 00% 25018 - +# 3 Short offline Completed without error 00% 24994 - +# 4 Extended offline Completed without error 00% 24972 - +# 5 Short offline Completed without error 00% 24971 - +# 6 Short offline Completed without error 00% 24947 - +# 7 Short offline Completed without error 00% 24923 - +# 8 Short offline Completed without error 00% 24899 - +# 9 Short offline Completed without error 00% 24875 - +#10 Short offline Completed without error 00% 24851 - +#11 Short offline Completed without error 00% 24827 - +#12 Extended offline Completed without error 00% 24805 - +#13 Short offline Completed without error 00% 24803 - +#14 Short offline Completed without error 00% 24780 - +#15 Short offline Completed without error 00% 24756 - +#16 Short offline Completed without error 00% 24732 - +#17 Short offline Completed without error 00% 24708 - +#18 Short offline Completed without error 00% 24684 - +#19 Short offline Completed without error 00% 24660 - +#20 Extended offline Completed without error 00% 24637 - +#21 Short offline Completed without error 00% 24636 - +#22 Short offline Completed without error 00% 24612 - +#23 Short offline Completed without error 00% 24588 - +#24 Short offline Completed without error 00% 24565 - +#25 Short offline Completed without error 00% 24541 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 19 Celsius +Power Cycle Min/Max Temperature: 18/25 Celsius +Lifetime Min/Max Temperature: 4/36 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 23 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (443) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x018 6 5124939737 --- Logical Sectors Written +0x01 0x020 6 212826039 --- Number of Write Commands +0x01 0x028 6 2749090236 --- Logical Sectors Read +0x01 0x030 6 26706335 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 19 --- Current Temperature +0x05 0x010 1 21 --- Average Short Term Temperature +0x05 0x018 1 18 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 11 --- Lowest Average Short Term Temperature +0x05 0x040 1 19 --- Highest Average Long Term Temperature +0x05 0x048 1 12 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3046 --- Number of Hardware Resets +0x06 0x010 4 142 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/TK0120/TK0120GDJXT/1EA7F3B5BA5B b/SSD/Intel/TK0120/TK0120GDJXT/1EA7F3B5BA5B new file mode 100644 index 000000000..90cec3700 --- /dev/null +++ b/SSD/Intel/TK0120/TK0120GDJXT/1EA7F3B5BA5B @@ -0,0 +1,195 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TK0120GDJXT +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 4IWBHPG1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 24 14:30:31 2025 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 10305299 + 5 Reallocated_Sector_Ct PO--CK 096 096 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24257 +173 Unknown_Attribute PO--CK 099 099 001 - 0 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 601587909258 +180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 130 130 039 - 16416155 +194 Temperature_Celsius -O---K 100 100 000 - 18 +196 Reallocated_Event_Count PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL,SL VS 127 Device vendor specific log +0xd0 GPL,SL VS 1 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 18 Celsius +Power Cycle Min/Max Temperature: 15/20 Celsius +Lifetime Min/Max Temperature: 4/36 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 29 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/55 Celsius +Min/Max Temperature Limit: 0/55 Celsius +Temperature History Size (Index): 478 (0) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x018 6 6120211966 --- Logical Sectors Written +0x01 0x020 6 129022069 --- Number of Write Commands +0x01 0x028 6 1970030410 --- Logical Sectors Read +0x01 0x030 6 99415466 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 18 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 17 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 11 --- Lowest Average Short Term Temperature +0x05 0x040 1 19 --- Highest Average Long Term Temperature +0x05 0x048 1 12 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1048 --- Number of Hardware Resets +0x06 0x010 4 126 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intenso/JAJMS600/JAJMS600M128G/4CEEBBAF2296 b/SSD/Intenso/JAJMS600/JAJMS600M128G/4CEEBBAF2296 new file mode 100644 index 000000000..002bf788d --- /dev/null +++ b/SSD/Intenso/JAJMS600/JAJMS600M128G/4CEEBBAF2296 @@ -0,0 +1,147 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: JAJMS600M128G +Serial Number: -- +Firmware Version: U0401A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 6 16:43:00 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 28645 + 12 Power_Cycle_Count -O--CK 100 100 050 - 122 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 40026 +165 Unknown_Attribute -O--CK 100 100 050 - 173 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 138 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 120 +194 Temperature_Celsius -O---K 100 100 050 - 52 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 360716 +242 Total_LBAs_Read ----CK 100 100 050 - 4144 +245 Unknown_Attribute -O--CK 100 100 050 - 169728 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 122 --- Lifetime Power-On Resets +0x01 0x010 4 28645 --- Power-on Hours +0x01 0x018 6 2165081585 --- Logical Sectors Written +0x01 0x020 6 241721575 --- Number of Write Commands +0x01 0x028 6 271641526 --- Logical Sectors Read +0x01 0x030 6 13935909 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/JAJMS600/JAJMS600M128G/C27B7320AA0C b/SSD/Intenso/JAJMS600/JAJMS600M128G/C27B7320AA0C new file mode 100644 index 000000000..4fa67d437 --- /dev/null +++ b/SSD/Intenso/JAJMS600/JAJMS600M128G/C27B7320AA0C @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: JAJMS600M128G +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R5305 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 19 12:39:35 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24123 + 12 Power_Cycle_Count -O--CK 100 100 000 - 87 +161 Unknown_Attribute -O--CK 100 100 050 - 3 +162 Unknown_Attribute -O--CK 100 100 000 - 172372 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 333 +166 Unknown_Attribute -O--CK 100 100 000 - 46 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 89 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 81 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 1052486 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 60 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 1179 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 287 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 381 +232 Available_Reservd_Space -O--CK 100 100 000 - 97 +241 Total_LBAs_Written -O--CK 100 100 000 - 9078 +242 Total_LBAs_Read -O--CK 100 100 000 - 49 +249 Unknown_Attribute -O--CK 100 100 000 - 34091 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 9089 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 87 --- Lifetime Power-On Resets +0x01 0x010 4 24123 --- Power-on Hours +0x01 0x018 6 19039065968 --- Logical Sectors Written +0x01 0x020 6 712786769 --- Number of Write Commands +0x01 0x028 6 104836776 --- Logical Sectors Read +0x01 0x030 6 5159656 --- Number of Read Commands +0x01 0x038 6 86845042225 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 132 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SATA/SATA III SSD/148F1CBA063E b/SSD/Intenso/SATA/SATA III SSD/148F1CBA063E new file mode 100644 index 000000000..c34273e4f --- /dev/null +++ b/SSD/Intenso/SATA/SATA III SSD/148F1CBA063E @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: INTENSO SATA III SSD +Serial Number: -- +Firmware Version: SAFM12.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 4 12:03:58 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20756 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1469 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 100 100 010 - 0/99 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 75 (Average 48) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 409 +194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 96 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6723 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 00% 3660 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1469 --- Lifetime Power-On Resets +0x01 0x010 4 20756 --- Power-on Hours +0x01 0x018 6 14100197438 --- Logical Sectors Written +0x01 0x020 6 151937336 --- Number of Write Commands +0x01 0x028 6 14837365605 --- Logical Sectors Read +0x01 0x030 6 181608923 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 19 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 47071 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 120GB/FDBE25C418D5 b/SSD/Intenso/SSD Sata III/SSD Sata III 120GB/FDBE25C418D5 new file mode 100644 index 000000000..2ff9adc07 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 120GB/FDBE25C418D5 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: V1128A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 6 01:22:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 930 + 12 Power_Cycle_Count -O--CK 100 100 050 - 49 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 6390 +165 Unknown_Attribute -O--CK 100 100 050 - 7 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 4 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 43 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 4116 +242 Total_LBAs_Read ----CK 100 100 050 - 770 +245 Unknown_Attribute -O--CK 100 100 050 - 3352 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 844 - +# 2 Extended offline Completed without error 00% 844 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 20/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 930 --- Power-on Hours +0x01 0x018 6 269765012 --- Logical Sectors Written +0x01 0x020 6 5918267 --- Number of Write Commands +0x01 0x028 6 50521729 --- Logical Sectors Read +0x01 0x030 6 472573 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 120GB/FEACAFB3CFF2 b/SSD/Intenso/SSD Sata III/SSD Sata III 120GB/FEACAFB3CFF2 new file mode 100644 index 000000000..38a983378 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 120GB/FEACAFB3CFF2 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: V1128A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 6 01:22:39 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1135 + 12 Power_Cycle_Count -O--CK 100 100 050 - 63 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 12230 +165 Unknown_Attribute -O--CK 100 100 050 - 21 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 7 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 51 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 8710 +242 Total_LBAs_Read ----CK 100 100 050 - 1455 +245 Unknown_Attribute -O--CK 100 100 050 - 7355 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 63 --- Lifetime Power-On Resets +0x01 0x010 4 1135 --- Power-on Hours +0x01 0x018 6 570883978 --- Logical Sectors Written +0x01 0x020 6 16481723 --- Number of Write Commands +0x01 0x028 6 95365278 --- Logical Sectors Read +0x01 0x030 6 1170995 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/384417C93022 b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/384417C93022 new file mode 100644 index 000000000..1ca5e1a07 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/384417C93022 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based OEM SSDs +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: W0825A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 19 06:13:18 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 276 + 12 Power_Cycle_Count -O--CK 100 100 050 - 113 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 24 +164 Total_Erase_Count -O--CK 100 100 050 - 24763 +165 Max_Erase_Count -O--CK 100 100 050 - 46 +166 Min_Erase_Count -O--CK 100 100 050 - 9 +167 Average_Erase_Count -O--CK 100 100 050 - 15 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 5050 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 69 +194 Temperature_Celsius -O---K 100 100 050 - 22 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 19669 +242 Host_Reads_32MiB ----CK 100 100 050 - 10334 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 17259 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 22/22 Celsius +Lifetime Min/Max Temperature: 22/50 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 113 --- Lifetime Power-On Resets +0x01 0x010 4 276 --- Power-on Hours +0x01 0x018 6 1289034566 --- Logical Sectors Written +0x01 0x020 6 7278613 --- Number of Write Commands +0x01 0x028 6 677278775 --- Logical Sectors Read +0x01 0x030 6 6012041 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 26 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/BF47F192CC0C b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/BF47F192CC0C new file mode 100644 index 000000000..4006be00b --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/BF47F192CC0C @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based OEM SSDs +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: W0825A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 3 18:53:23 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 158 + 12 Power_Cycle_Count -O--CK 100 100 050 - 66 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 23 +164 Total_Erase_Count -O--CK 100 100 050 - 8295 +165 Max_Erase_Count -O--CK 100 100 050 - 6 +166 Min_Erase_Count -O--CK 100 100 050 - 4 +167 Average_Erase_Count -O--CK 100 100 050 - 5 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 5050 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 54 +194 Temperature_Celsius -O---K 100 100 050 - 41 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 8054 +242 Host_Reads_32MiB ----CK 100 100 050 - 3977 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 4704 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 41/41 Celsius +Lifetime Min/Max Temperature: 17/53 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 66 --- Lifetime Power-On Resets +0x01 0x010 4 158 --- Power-on Hours +0x01 0x018 6 527837398 --- Logical Sectors Written +0x01 0x020 6 3706997 --- Number of Write Commands +0x01 0x028 6 260653019 --- Logical Sectors Read +0x01 0x030 6 2563401 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 250GB/8B93221C5798 b/SSD/Intenso/SSD Sata III/SSD Sata III 250GB/8B93221C5798 new file mode 100644 index 000000000..cf6007b0c --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 250GB/8B93221C5798 @@ -0,0 +1,175 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: V0609A0 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 26 12:13:21 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1219 + 12 Power_Cycle_Count -O--CK 100 100 050 - 944 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 14 +164 Unknown_Attribute -O--CK 100 100 050 - 13799 +165 Unknown_Attribute -O--CK 100 100 050 - 43 +166 Unknown_Attribute -O--CK 100 100 050 - 35 +167 Unknown_Attribute -O--CK 100 100 050 - 40 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 451 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 1 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 102456 +242 Total_LBAs_Read ----CK 100 100 050 - 102224 +245 Unknown_Attribute -O--CK 100 100 050 - 34052 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 944 --- Lifetime Power-On Resets +0x01 0x010 4 1219 --- Power-on Hours +0x01 0x018 6 2419593636 --- Logical Sectors Written +0x01 0x020 6 44096008 --- Number of Write Commands +0x01 0x028 6 2404417355 --- Logical Sectors Read +0x01 0x030 6 133249685 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 500GB/6CEC64E23214 b/SSD/Intenso/SSD Sata III/SSD Sata III 500GB/6CEC64E23214 new file mode 100644 index 000000000..5fdaf45d4 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 500GB/6CEC64E23214 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: Y0722A0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Dec 8 15:46:42 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 961 + 12 Power_Cycle_Count -O--CK 100 100 050 - 24 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 19 +164 Unknown_Attribute -O--CK 100 100 050 - 90 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 23 +194 Temperature_Celsius -O---K 100 100 050 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 435 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 3301 +242 Total_LBAs_Read ----CK 100 100 050 - 1000 +245 Unknown_Attribute -O--CK 100 100 050 - 14 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 242 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 27/30 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 961 --- Power-on Hours +0x01 0x018 6 216399222 --- Logical Sectors Written +0x01 0x020 6 3945184 --- Number of Write Commands +0x01 0x028 6 65594570 --- Logical Sectors Read +0x01 0x030 6 2493747 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 120GB/18A1A0D22387 b/SSD/Intenso/SSD/SSD 120GB/18A1A0D22387 new file mode 100644 index 000000000..36f3e0abe --- /dev/null +++ b/SSD/Intenso/SSD/SSD 120GB/18A1A0D22387 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: X0219A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 18:03:23 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 0 + 12 Power_Cycle_Count -O--CK 100 100 050 - 5 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 31 +164 Unknown_Attribute -O--CK 100 100 050 - 7 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 25 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 76 +242 Total_LBAs_Read ----CK 100 100 050 - 14 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 25/25 Celsius +Lifetime Min/Max Temperature: 23/29 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 5035611 --- Logical Sectors Written +0x01 0x020 6 38605 --- Number of Write Commands +0x01 0x028 6 950773 --- Logical Sectors Read +0x01 0x030 6 25043 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 120GB/7D4F28DFBB27 b/SSD/Intenso/SSD/SSD 120GB/7D4F28DFBB27 new file mode 100644 index 000000000..732b8b257 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 120GB/7D4F28DFBB27 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: X0219A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 18:03:23 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 0 + 12 Power_Cycle_Count -O--CK 100 100 050 - 5 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 20 +164 Unknown_Attribute -O--CK 100 100 050 - 7 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 23 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 77 +242 Total_LBAs_Read ----CK 100 100 050 - 13 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 23/23 Celsius +Lifetime Min/Max Temperature: 22/28 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 5056864 --- Logical Sectors Written +0x01 0x020 6 38372 --- Number of Write Commands +0x01 0x028 6 860499 --- Logical Sectors Read +0x01 0x030 6 15691 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 120GB/95C27D50F0DA b/SSD/Intenso/SSD/SSD 120GB/95C27D50F0DA new file mode 100644 index 000000000..c3f7b958c --- /dev/null +++ b/SSD/Intenso/SSD/SSD 120GB/95C27D50F0DA @@ -0,0 +1,146 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO +Serial Number: -- +Firmware Version: U0312A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Nov 26 15:49:52 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3126 + 12 Power_Cycle_Count -O--CK 100 100 050 - 19 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 3 +164 Unknown_Attribute -O--CK 100 100 050 - 74672 +165 Unknown_Attribute -O--CK 100 100 050 - 953 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 118 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 18 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 110855 +242 Total_LBAs_Read ----CK 100 100 050 - 1117 +245 Unknown_Attribute -O--CK 100 100 050 - 79859 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 3126 --- Power-on Hours +0x01 0x018 6 2970064877 --- Logical Sectors Written +0x01 0x020 6 79404395 --- Number of Write Commands +0x01 0x028 6 73251782 --- Logical Sectors Read +0x01 0x030 6 1445392 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 54 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 120GB/9711D371F7C7 b/SSD/Intenso/SSD/SSD 120GB/9711D371F7C7 new file mode 100644 index 000000000..1ce458e4a --- /dev/null +++ b/SSD/Intenso/SSD/SSD 120GB/9711D371F7C7 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: X0219A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 18:03:23 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 0 + 12 Power_Cycle_Count -O--CK 100 100 050 - 5 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 20 +164 Unknown_Attribute -O--CK 100 100 050 - 7 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 25 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 77 +242 Total_LBAs_Read ----CK 100 100 050 - 14 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 25/25 Celsius +Lifetime Min/Max Temperature: 23/29 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 5056832 --- Logical Sectors Written +0x01 0x020 6 38326 --- Number of Write Commands +0x01 0x028 6 954097 --- Logical Sectors Read +0x01 0x030 6 20867 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 120GB/BBE7FB7AD5DE b/SSD/Intenso/SSD/SSD 120GB/BBE7FB7AD5DE new file mode 100644 index 000000000..a0d6262b6 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 120GB/BBE7FB7AD5DE @@ -0,0 +1,148 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based OEM SSDs +Device Model: Intenso SSD +Serial Number: -- +Firmware Version: U0401A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 6 23:51:51 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 25920 + 12 Power_Cycle_Count -O--CK 100 100 050 - 17 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 10 +164 Total_Erase_Count -O--CK 100 100 050 - 7313 +165 Max_Erase_Count -O--CK 100 100 050 - 44 +166 Min_Erase_Count -O--CK 100 100 050 - 2 +167 Average_Erase_Count -O--CK 100 100 050 - 14 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 7000 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 1 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 15269 +242 Host_Reads_32MiB ----CK 100 100 050 - 53985 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 7938 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 25920 --- Power-on Hours +0x01 0x018 6 1000729612 --- Logical Sectors Written +0x01 0x020 6 70085 --- Number of Write Commands +0x01 0x028 6 3538015112 --- Logical Sectors Read +0x01 0x030 6 21329 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 120GB/FF4CF0C80C9C b/SSD/Intenso/SSD/SSD 120GB/FF4CF0C80C9C new file mode 100644 index 000000000..0c90e213b --- /dev/null +++ b/SSD/Intenso/SSD/SSD 120GB/FF4CF0C80C9C @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: X0219A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 16 18:03:23 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 0 + 12 Power_Cycle_Count -O--CK 100 100 050 - 5 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 7 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 27 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 76 +242 Total_LBAs_Read ----CK 100 100 050 - 12 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 27/27 Celsius +Lifetime Min/Max Temperature: 24/29 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 5032472 --- Logical Sectors Written +0x01 0x020 6 38521 --- Number of Write Commands +0x01 0x028 6 851198 --- Logical Sectors Read +0x01 0x030 6 16266 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 128GB/100B96CAB085 b/SSD/Intenso/SSD/SSD 128GB/100B96CAB085 new file mode 100644 index 000000000..5f066fe34 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 128GB/100B96CAB085 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W1013A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jun 1 14:43:03 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 0 + 12 Power_Cycle_Count -O--CK 100 100 050 - 11 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 21 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 8 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 119 +242 Total_LBAs_Read ----CK 100 100 050 - 43 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 27/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 7837379 --- Logical Sectors Written +0x01 0x020 6 40318 --- Number of Write Commands +0x01 0x028 6 2874677 --- Logical Sectors Read +0x01 0x030 6 62809 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 128GB/3267AB478E4C b/SSD/Intenso/SSD/SSD 128GB/3267AB478E4C new file mode 100644 index 000000000..031a14ad2 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 128GB/3267AB478E4C @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD +Serial Number: -- +Firmware Version: R0522A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 8 13:57:08 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 446 + 12 Power_Cycle_Count -O--CK 100 100 050 - 290 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 42348 +165 Unknown_Attribute -O--CK 100 100 050 - 134 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 86 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 28 +194 Temperature_Celsius -O---K 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 28 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 68347 +242 Total_LBAs_Read ----CK 100 100 050 - 82376 +245 Unknown_Attribute -O--CK 100 100 050 - 100944 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 290 --- Lifetime Power-On Resets +0x01 0x010 4 446 --- Power-on Hours +0x01 0x018 6 184236357 --- Logical Sectors Written +0x01 0x020 6 366487 --- Number of Write Commands +0x01 0x028 6 1103629256 --- Logical Sectors Read +0x01 0x030 6 96315 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 128GB/4753A1D0A6DE b/SSD/Intenso/SSD/SSD 128GB/4753A1D0A6DE new file mode 100644 index 000000000..743e1c1b3 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 128GB/4753A1D0A6DE @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 21:44:51 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 7584 + 12 Power_Cycle_Count -O--CK 100 100 050 - 247 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 2 +164 Unknown_Attribute -O--CK 100 100 050 - 368373 +165 Unknown_Attribute -O--CK 100 100 050 - 1610 +166 Unknown_Attribute -O--CK 100 100 050 - 1312 +167 Unknown_Attribute -O--CK 100 100 050 - 1479 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 71 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 204 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1217232 +242 Total_LBAs_Read ----CK 100 100 050 - 1502 +245 Unknown_Attribute -O--CK 100 100 050 - 5624696 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 247 --- Lifetime Power-On Resets +0x01 0x010 4 7584 --- Power-on Hours +0x01 0x018 6 2463137357 --- Logical Sectors Written +0x01 0x020 6 574588323 --- Number of Write Commands +0x01 0x028 6 98440508 --- Logical Sectors Read +0x01 0x030 6 3090066 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 48 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 128GB/502B2C066732 b/SSD/Intenso/SSD/SSD 128GB/502B2C066732 new file mode 100644 index 000000000..7c8cae99e --- /dev/null +++ b/SSD/Intenso/SSD/SSD 128GB/502B2C066732 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 21:44:51 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6905 + 12 Power_Cycle_Count -O--CK 100 100 050 - 252 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 2 +164 Unknown_Attribute -O--CK 100 100 050 - 366481 +165 Unknown_Attribute -O--CK 100 100 050 - 1602 +166 Unknown_Attribute -O--CK 100 100 050 - 1304 +167 Unknown_Attribute -O--CK 100 100 050 - 1471 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 71 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 207 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1217218 +242 Total_LBAs_Read ----CK 100 100 050 - 1667 +245 Unknown_Attribute -O--CK 100 100 050 - 5594817 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 252 --- Lifetime Power-On Resets +0x01 0x010 4 6905 --- Power-on Hours +0x01 0x018 6 2462248600 --- Logical Sectors Written +0x01 0x020 6 575893452 --- Number of Write Commands +0x01 0x028 6 109273359 --- Logical Sectors Read +0x01 0x030 6 3252980 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 47 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 128GB/A938F0E95149 b/SSD/Intenso/SSD/SSD 128GB/A938F0E95149 new file mode 100644 index 000000000..bf0acdfaf --- /dev/null +++ b/SSD/Intenso/SSD/SSD 128GB/A938F0E95149 @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: INTENSO +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM91.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 27 08:45:00 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 50597 + 12 Power_Cycle_Count -O--C- 100 100 000 - 271 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl PO---- 085 085 000 - 0/137 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 116 (Average 52) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 220 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 98 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 5481 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 271 --- Lifetime Power-On Resets +0x01 0x010 4 50597 --- Power-on Hours +0x01 0x018 6 11494777410 --- Logical Sectors Written +0x01 0x028 6 5880160378 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intenso/SSD/SSD 1TB/6F7519E20A6C b/SSD/Intenso/SSD/SSD 1TB/6F7519E20A6C new file mode 100644 index 000000000..23f21ce66 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 1TB/6F7519E20A6C @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: V1027A0 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 13 17:44:13 2025 +03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 407 + 12 Power_Cycle_Count -O--CK 100 100 050 - 344 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 42 +164 Unknown_Attribute -O--CK 100 100 050 - 7201 +165 Unknown_Attribute -O--CK 100 100 050 - 19 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 13 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 38 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 124624 +242 Total_LBAs_Read ----CK 100 100 050 - 75155 +245 Unknown_Attribute -O--CK 100 100 050 - 47538 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 37/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 344 --- Lifetime Power-On Resets +0x01 0x010 4 407 --- Power-on Hours +0x01 0x018 6 3872433768 --- Logical Sectors Written +0x01 0x020 6 61798674 --- Number of Write Commands +0x01 0x028 6 630429744 --- Logical Sectors Read +0x01 0x030 6 41951853 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 1TB/E0600027FCA0 b/SSD/Intenso/SSD/SSD 1TB/E0600027FCA0 new file mode 100644 index 000000000..25c6ad30e --- /dev/null +++ b/SSD/Intenso/SSD/SSD 1TB/E0600027FCA0 @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based OEM SSDs +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: V1027A0 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 12 16:05:56 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 15178 + 12 Power_Cycle_Count -O--CK 100 100 050 - 69 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 36 +164 Total_Erase_Count -O--CK 100 100 050 - 386121 +165 Max_Erase_Count -O--CK 100 100 050 - 320 +166 Min_Erase_Count -O--CK 100 100 050 - 19 +167 Average_Erase_Count -O--CK 100 100 050 - 215 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 5050 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 96 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 30 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 1106187 +242 Host_Reads_32MiB ----CK 100 100 050 - 152800 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 6579962 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1068 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 23/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 69 --- Lifetime Power-On Resets +0x01 0x010 4 15178 --- Power-on Hours +0x01 0x018 6 3775629222 --- Logical Sectors Written +0x01 0x020 6 2052385290 --- Number of Write Commands +0x01 0x028 6 1423998426 --- Logical Sectors Read +0x01 0x030 6 159361645 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 4 Command failed due to ICRC error +0x0002 4 3 R_ERR response for data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 1TB/EBF3DDED4FCF b/SSD/Intenso/SSD/SSD 1TB/EBF3DDED4FCF new file mode 100644 index 000000000..f5584ae25 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 1TB/EBF3DDED4FCF @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0802A0 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 12 16:05:56 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 6458 + 12 Power_Cycle_Count -O--CK 100 100 050 - 9 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 50998 +165 Unknown_Attribute -O--CK 100 100 050 - 363 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 107 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 3 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 429179 +242 Total_LBAs_Read ----CK 100 100 050 - 38548 +245 Unknown_Attribute -O--CK 100 100 050 - 2094130 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 19/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 6458 --- Power-on Hours +0x01 0x018 6 2356886410 --- Logical Sectors Written +0x01 0x020 6 687035899 --- Number of Write Commands +0x01 0x028 6 2526331487 --- Logical Sectors Read +0x01 0x030 6 18400180 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 240GB/21652E7AFC4B b/SSD/Intenso/SSD/SSD 240GB/21652E7AFC4B new file mode 100644 index 000000000..6d6027fbf --- /dev/null +++ b/SSD/Intenso/SSD/SSD 240GB/21652E7AFC4B @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0509A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 19 19:20:01 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2188 + 12 Power_Cycle_Count -O--CK 100 100 050 - 498 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 12120 +165 Unknown_Attribute -O--CK 100 100 050 - 85 +166 Unknown_Attribute -O--CK 100 100 050 - 7 +167 Unknown_Attribute -O--CK 100 100 050 - 50 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 17 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 72761 +242 Total_LBAs_Read ----CK 100 100 050 - 54483 +245 Unknown_Attribute -O--CK 100 100 050 - 91080 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 498 --- Lifetime Power-On Resets +0x01 0x010 4 2188 --- Power-on Hours +0x01 0x018 6 473545645 --- Logical Sectors Written +0x01 0x020 6 97615889 --- Number of Write Commands +0x01 0x028 6 3570632074 --- Logical Sectors Read +0x01 0x030 6 46914029 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 240GB/6CE9EAB4AD64 b/SSD/Intenso/SSD/SSD 240GB/6CE9EAB4AD64 new file mode 100644 index 000000000..33370ad07 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 240GB/6CE9EAB4AD64 @@ -0,0 +1,168 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based OEM SSDs +Device Model: INTENSO +Serial Number: -- +Firmware Version: V0609A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 28 13:53:50 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 201 + 12 Power_Cycle_Count -O--CK 100 100 050 - 506 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 140 +164 Total_Erase_Count -O--CK 100 100 050 - 37267 +165 Max_Erase_Count -O--CK 100 100 050 - 114 +166 Min_Erase_Count -O--CK 100 100 050 - 4 +167 Average_Erase_Count -O--CK 100 100 050 - 26 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 5050 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 24 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 62893 +242 Host_Reads_32MiB ----CK 100 100 050 - 31178 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 92809 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 90% 145 - +# 2 Extended offline Interrupted (host reset) 90% 137 - +# 3 Short offline Completed without error 00% 116 - +# 4 Extended offline Completed without error 00% 116 - +# 5 Extended offline Aborted by host 60% 113 - +# 6 Extended offline Completed without error 00% 112 - +# 7 Short offline Completed without error 00% 108 - +# 8 Short offline Completed without error 00% 108 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 506 --- Lifetime Power-On Resets +0x01 0x010 4 201 --- Power-on Hours +0x01 0x018 6 4121776659 --- Logical Sectors Written +0x01 0x020 6 22254786 --- Number of Write Commands +0x01 0x028 6 2043329534 --- Logical Sectors Read +0x01 0x030 6 20246421 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 250GB/059AC1AC2D51 b/SSD/Intenso/SSD/SSD 250GB/059AC1AC2D51 new file mode 100644 index 000000000..1d26b8c57 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 250GB/059AC1AC2D51 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: X0509A0 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 16 14:50:40 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 206 + 12 Power_Cycle_Count -O--CK 100 100 050 - 116 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 28 +164 Unknown_Attribute -O--CK 100 100 050 - 955 +165 Unknown_Attribute -O--CK 100 100 050 - 4 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 31 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 6336 +242 Total_LBAs_Read ----CK 100 100 050 - 6364 +245 Unknown_Attribute -O--CK 100 100 050 - 2520 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 116 --- Lifetime Power-On Resets +0x01 0x010 4 206 --- Power-on Hours +0x01 0x018 6 415296016 --- Logical Sectors Written +0x01 0x020 6 3811236 --- Number of Write Commands +0x01 0x028 6 417123334 --- Logical Sectors Read +0x01 0x030 6 8698852 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 250GB/AA78D6B2FE0B b/SSD/Intenso/SSD/SSD 250GB/AA78D6B2FE0B new file mode 100644 index 000000000..bad5138c5 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 250GB/AA78D6B2FE0B @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 250,058,268,160 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Mar 16 13:01:20 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 76 + 12 Power_Cycle_Count -O--CK 100 100 050 - 123 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 1446 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 103 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7741 +242 Total_LBAs_Read ----CK 100 100 050 - 7491 +245 Unknown_Attribute -O--CK 100 100 050 - 528 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 18/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 123 --- Lifetime Power-On Resets +0x01 0x010 4 76 --- Power-on Hours +0x01 0x018 6 507373381 --- Logical Sectors Written +0x01 0x020 6 4725709 --- Number of Write Commands +0x01 0x028 6 490959914 --- Logical Sectors Read +0x01 0x030 6 6110594 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 256GB/54B7BED94F7A b/SSD/Intenso/SSD/SSD 256GB/54B7BED94F7A new file mode 100644 index 000000000..4684d1cea --- /dev/null +++ b/SSD/Intenso/SSD/SSD 256GB/54B7BED94F7A @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: V1103A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 7 11:50:25 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5956 + 12 Power_Cycle_Count -O--CK 100 100 050 - 40 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 16 +164 Unknown_Attribute -O--CK 100 100 050 - 59658 +165 Unknown_Attribute -O--CK 100 100 050 - 151 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 89 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 36 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 97455 +242 Total_LBAs_Read ----CK 100 100 050 - 35397 +245 Unknown_Attribute -O--CK 100 100 050 - 687695 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 25/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 5956 --- Power-on Hours +0x01 0x018 6 2091863711 --- Logical Sectors Written +0x01 0x020 6 233778584 --- Number of Write Commands +0x01 0x028 6 2319783966 --- Logical Sectors Read +0x01 0x030 6 48157073 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 256GB/E9CFE556689D b/SSD/Intenso/SSD/SSD 256GB/E9CFE556689D new file mode 100644 index 000000000..9948f99e7 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 256GB/E9CFE556689D @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0222A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 7 11:50:25 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5975 + 12 Power_Cycle_Count -O--CK 100 100 050 - 39 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 23 +164 Unknown_Attribute -O--CK 100 100 050 - 43580 +165 Unknown_Attribute -O--CK 100 100 050 - 228 +166 Unknown_Attribute -O--CK 100 100 050 - 12 +167 Unknown_Attribute -O--CK 100 100 050 - 90 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 35 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 97477 +242 Total_LBAs_Read ----CK 100 100 050 - 34777 +245 Unknown_Attribute -O--CK 100 100 050 - 688297 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 27/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 39 --- Lifetime Power-On Resets +0x01 0x010 4 5975 --- Power-on Hours +0x01 0x018 6 2093340722 --- Logical Sectors Written +0x01 0x020 6 231742978 --- Number of Write Commands +0x01 0x028 6 2279161749 --- Logical Sectors Read +0x01 0x030 6 47027767 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 256GB/F9F3D4CD9B55 b/SSD/Intenso/SSD/SSD 256GB/F9F3D4CD9B55 new file mode 100644 index 000000000..5c095aa13 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 256GB/F9F3D4CD9B55 @@ -0,0 +1,162 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0714A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 21 21:03:54 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5 + 12 Power_Cycle_Count -O--CK 100 100 050 - 60 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 17 +164 Unknown_Attribute -O--CK 100 100 050 - 184 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 37 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1126 +242 Total_LBAs_Read ----CK 100 100 050 - 483 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 0 - +# 2 Short offline Completed without error 00% 0 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 23/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 60 --- Lifetime Power-On Resets +0x01 0x010 4 5 --- Power-on Hours +0x01 0x018 6 73794901 --- Logical Sectors Written +0x01 0x020 6 741846 --- Number of Write Commands +0x01 0x028 6 31688582 --- Logical Sectors Read +0x01 0x030 6 348765 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 500GB/373FFE1CEEE3 b/SSD/Intenso/SSD/SSD 500GB/373FFE1CEEE3 new file mode 100644 index 000000000..36c844eb1 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 500GB/373FFE1CEEE3 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0825A0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Feb 21 23:51:15 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 21 + 12 Power_Cycle_Count -O--CK 100 100 050 - 9 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 24 +164 Unknown_Attribute -O--CK 100 100 050 - 45 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 592 +242 Total_LBAs_Read ----CK 100 100 050 - 161 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 21 --- Power-on Hours +0x01 0x018 6 38821405 --- Logical Sectors Written +0x01 0x020 6 573665 --- Number of Write Commands +0x01 0x028 6 10557097 --- Logical Sectors Read +0x01 0x030 6 167290 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 500GB/A03EAC3D3082 b/SSD/Intenso/SSD/SSD 500GB/A03EAC3D3082 new file mode 100644 index 000000000..79a7c9c09 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 500GB/A03EAC3D3082 @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO +Serial Number: -- +Firmware Version: V0621A0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 24 00:39:59 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3357 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1722 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 431 +165 Unknown_Attribute -O--CK 100 100 050 - 6 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 3 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 381 +194 Temperature_Celsius -O---K 100 100 050 - 29 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 13798 +242 Total_LBAs_Read ----CK 100 100 050 - 23959 +245 Unknown_Attribute -O--CK 100 100 050 - 12393 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 29/29 Celsius +Lifetime Min/Max Temperature: 18/42 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1722 --- Lifetime Power-On Resets +0x01 0x010 4 3357 --- Power-on Hours +0x01 0x018 6 904298077 --- Logical Sectors Written +0x01 0x020 6 3378119 --- Number of Write Commands +0x01 0x028 6 1570240138 --- Logical Sectors Read +0x01 0x030 6 13194391 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Intenso/SSD/SSD 512GB/449DC318C8FF b/SSD/Intenso/SSD/SSD 512GB/449DC318C8FF new file mode 100644 index 000000000..012370dac --- /dev/null +++ b/SSD/Intenso/SSD/SSD 512GB/449DC318C8FF @@ -0,0 +1,166 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0704A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 27 02:21:50 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1442 + 12 Power_Cycle_Count -O--CK 100 100 050 - 99 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 1666 +165 Unknown_Attribute -O--CK 100 100 050 - 2 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 70 +194 Temperature_Celsius -O---K 100 100 050 - 29 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7658 +242 Total_LBAs_Read ----CK 100 100 050 - 8001 +245 Unknown_Attribute -O--CK 100 100 050 - 2610 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1108 - +# 2 Short offline Completed without error 00% 1011 - +# 3 Short offline Completed without error 00% 957 - +# 4 Short offline Completed without error 00% 948 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 29/29 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 99 --- Lifetime Power-On Resets +0x01 0x010 4 1442 --- Power-on Hours +0x01 0x018 6 501923546 --- Logical Sectors Written +0x01 0x020 6 5802478 --- Number of Write Commands +0x01 0x028 6 524362825 --- Logical Sectors Read +0x01 0x030 6 7007664 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD 512GB/5BDEE8C8BBC0 b/SSD/Intenso/SSD/SSD 512GB/5BDEE8C8BBC0 new file mode 100644 index 000000000..0f499d0d0 --- /dev/null +++ b/SSD/Intenso/SSD/SSD 512GB/5BDEE8C8BBC0 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTENSO SSD +Serial Number: -- +Firmware Version: W0704A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 18 09:17:00 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5666 + 12 Power_Cycle_Count -O--CK 100 100 050 - 16 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 4 +164 Unknown_Attribute -O--CK 100 100 050 - 16010 +165 Unknown_Attribute -O--CK 100 100 050 - 32 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 17 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 175650 +242 Total_LBAs_Read ----CK 100 100 050 - 1561 +245 Unknown_Attribute -O--CK 100 100 050 - 98118 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 5666 --- Power-on Hours +0x01 0x018 6 2921472723 --- Logical Sectors Written +0x01 0x020 6 125255503 --- Number of Write Commands +0x01 0x028 6 102312225 --- Logical Sectors Read +0x01 0x030 6 2458972 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 53 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Intenso/SSD/SSD SATAIII/5AF4FCCB7A56 b/SSD/Intenso/SSD/SSD SATAIII/5AF4FCCB7A56 new file mode 100644 index 000000000..842d7d0ae --- /dev/null +++ b/SSD/Intenso/SSD/SSD SATAIII/5AF4FCCB7A56 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD SATAIII +Serial Number: -- +Firmware Version: W0825A0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 30 19:22:06 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10 + 12 Power_Cycle_Count -O--CK 100 100 050 - 36 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 889 +165 Unknown_Attribute -O--CK 100 100 050 - 3 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 1 +168 Unknown_Attribute -O--CK 100 100 050 - 3808 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 28 +194 Temperature_Celsius -O---K 100 100 050 - 32 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7509 +242 Total_LBAs_Read ----CK 100 100 050 - 1620 +245 Unknown_Attribute -O--CK 100 100 050 - 2285 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/32 Celsius +Lifetime Min/Max Temperature: 23/42 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 36 --- Lifetime Power-On Resets +0x01 0x010 4 10 --- Power-on Hours +0x01 0x018 6 492153340 --- Logical Sectors Written +0x01 0x020 6 2490267 --- Number of Write Commands +0x01 0x028 6 106209635 --- Logical Sectors Read +0x01 0x030 6 1165002 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 26 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/JWX/MSATA/MSATA 256GB/13CA5F907A42 b/SSD/JWX/MSATA/MSATA 256GB/13CA5F907A42 new file mode 100644 index 000000000..45b3b1c37 --- /dev/null +++ b/SSD/JWX/MSATA/MSATA 256GB/13CA5F907A42 @@ -0,0 +1,160 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: JWX MSATA 256GB +Serial Number: -- +Firmware Version: X0723A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jan 1 02:07:51 2025 HKT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4 + 12 Power_Cycle_Count -O--CK 100 100 050 - 10 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 82 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 253 +242 Total_LBAs_Read ----CK 100 100 050 - 33 +245 Unknown_Attribute -O--CK 100 100 050 - 15 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 16592286 --- Logical Sectors Written +0x01 0x020 6 55900 --- Number of Write Commands +0x01 0x028 6 2183213 --- Logical Sectors Read +0x01 0x030 6 54974 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KBM/SSD/SSD 128GB/804F31AF6618 b/SSD/KBM/SSD/SSD 128GB/804F31AF6618 new file mode 100644 index 000000000..caee8951d --- /dev/null +++ b/SSD/KBM/SSD/SSD 128GB/804F31AF6618 @@ -0,0 +1,147 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KBM SSD 128GB +Serial Number: -- +Firmware Version: V0110A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 31 15:38:49 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 11006 + 12 Power_Cycle_Count -O--CK 100 100 050 - 74 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 9 +164 Unknown_Attribute -O--CK 100 100 050 - 1587238 +165 Unknown_Attribute -O--CK 100 100 050 - 16227 +166 Unknown_Attribute -O--CK 100 100 050 - 1990 +167 Unknown_Attribute -O--CK 100 100 050 - 3219 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 55 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 65 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 113974 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1772789 +242 Total_LBAs_Read ----CK 100 100 050 - 46799 +245 Unknown_Attribute -O--CK 100 100 050 - 7706361 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5735 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 74 --- Lifetime Power-On Resets +0x01 0x010 4 11006 --- Power-on Hours +0x01 0x018 6 217395450 --- Logical Sectors Written +0x01 0x020 6 68862155 --- Number of Write Commands +0x01 0x028 6 3067071879 --- Logical Sectors Read +0x01 0x030 6 4515006 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 45 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/6758CDFA0125 b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/6758CDFA0125 new file mode 100644 index 000000000..afc2d14ac --- /dev/null +++ b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/6758CDFA0125 @@ -0,0 +1,126 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KIOXIA-EXCERIA SATA SSD +Serial Number: -- +LU WWN Device Id: 5 00080d ... +Firmware Version: SBFA12.7 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 27 10:40:31 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 15371 + 12 Power_Cycle_Count -O--C- 100 100 000 - 565 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO---- 100 100 010 - 1 +173 Unknown_Attribute -O--C- 001 001 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius PO---K 061 059 020 - 39 (Min/Max 1/41) +241 Total_LBAs_Written -O--CK 100 100 000 - 9710789 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 565 --- Lifetime Power-On Resets +0x01 0x010 4 15371 --- Power-on Hours +0x01 0x018 6 636406282766 --- Logical Sectors Written +0x01 0x028 6 5602857168 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 1 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/B67C48185C08 b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/B67C48185C08 new file mode 100644 index 000000000..11cb40b0d --- /dev/null +++ b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/B67C48185C08 @@ -0,0 +1,129 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KIOXIA-EXCERIA SATA SSD +Serial Number: -- +LU WWN Device Id: 5 8ce38e ... +Firmware Version: SBFA15.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 23 19:25:59 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 5561 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2837 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO---- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 185 185 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 444 +194 Temperature_Celsius PO---K 078 064 020 - 22 (Min/Max 15/36) +241 Total_LBAs_Written -O--CK 100 100 000 - 383872 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2837 --- Lifetime Power-On Resets +0x01 0x010 4 5561 --- Power-on Hours +0x01 0x018 6 25157468202 --- Logical Sectors Written +0x01 0x028 6 44909507134 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/FED2B53BB909 b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/FED2B53BB909 new file mode 100644 index 000000000..1462b1821 --- /dev/null +++ b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 240GB/FED2B53BB909 @@ -0,0 +1,60 @@ +smartctl 7.4 2023-08-01 r5530 [NetBSD 10.1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KIOXIA-EXCERIA SATA SSD +Serial Number: -- +LU WWN Device Id: 5 00080d ... +Firmware Version: SBFA12.7 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sat Nov 1 15:11:41 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 9477 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 2632 +167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 +169 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 +173 Unknown_Attribute 0x0012 175 175 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 193 +194 Temperature_Celsius 0x0023 065 054 020 Pre-fail Always - 35 (Min/Max 19/46) +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 263693 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 480GB/02547ADD63A2 b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 480GB/02547ADD63A2 new file mode 100644 index 000000000..de40d237f --- /dev/null +++ b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 480GB/02547ADD63A2 @@ -0,0 +1,130 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KIOXIA-EXCERIA SATA SSD +Serial Number: -- +LU WWN Device Id: 5 8ce38e ... +Firmware Version: SBFA1a.1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 11 10:36:43 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 5205 + 12 Power_Cycle_Count -O--C- 100 100 000 - 8 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO---- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 4 +194 Temperature_Celsius PO---K 067 067 020 - 33 (Min/Max 18/33) +241 Total_LBAs_Written -O--CK 100 100 000 - 2307 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 8 --- Lifetime Power-On Resets +0x01 0x010 4 5205 --- Power-on Hours +0x01 0x018 6 151200840 --- Logical Sectors Written +0x01 0x028 6 199011924 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 480GB/8B15226B33DB b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 480GB/8B15226B33DB new file mode 100644 index 000000000..ae3d01a72 --- /dev/null +++ b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 480GB/8B15226B33DB @@ -0,0 +1,130 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KIOXIA-EXCERIA SATA SSD +Serial Number: -- +LU WWN Device Id: 5 8ce38e ... +Firmware Version: SBFA1a.1 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 11 10:36:43 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 5205 + 12 Power_Cycle_Count -O--C- 100 100 000 - 8 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO---- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 4 +194 Temperature_Celsius PO---K 067 067 020 - 33 (Min/Max 17/33) +241 Total_LBAs_Written -O--CK 100 100 000 - 2307 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 8 --- Lifetime Power-On Resets +0x01 0x010 4 5205 --- Power-on Hours +0x01 0x018 6 151201328 --- Logical Sectors Written +0x01 0x028 6 199492804 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 960GB/AC59D928933F b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 960GB/AC59D928933F new file mode 100644 index 000000000..16de99a5d --- /dev/null +++ b/SSD/KIOXIA-EXCERIA/SATA SSD/SATA SSD 960GB/AC59D928933F @@ -0,0 +1,129 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KIOXIA-EXCERIA SATA SSD +Serial Number: -- +LU WWN Device Id: 5 8ce38e ... +Firmware Version: SBFA1a.1 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Dec 20 17:55:08 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 3299 + 12 Power_Cycle_Count -O--C- 100 100 000 - 885 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO---- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 197 197 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 163 +194 Temperature_Celsius PO---K 073 055 020 - 27 (Min/Max 18/45) +241 Total_LBAs_Written -O--CK 100 100 000 - 236145 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 885 --- Lifetime Power-On Resets +0x01 0x010 4 3299 --- Power-on Hours +0x01 0x018 6 15476050150 --- Logical Sectors Written +0x01 0x028 6 25506366632 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3081 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KLEVV/NEO N400/NEO N400 SSD 240GB/48B181FD594D b/SSD/KLEVV/NEO N400/NEO N400 SSD 240GB/48B181FD594D new file mode 100644 index 000000000..8005cf005 --- /dev/null +++ b/SSD/KLEVV/NEO N400/NEO N400 SSD 240GB/48B181FD594D @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KLEVV NEO N400 SSD 240GB +Serial Number: -- +Firmware Version: SBFME1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Nov 22 20:47:39 2025 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6848 + 12 Power_Cycle_Count -O--C- 100 100 000 - 181 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 4 +173 Unknown_Attribute -O--C- 100 100 000 - 1900602 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 43 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 +241 Total_LBAs_Written -O--C- 100 100 000 - 3820 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 181 --- Lifetime Power-On Resets +0x01 0x010 4 6848 --- Power-on Hours +0x01 0x018 6 8012391592 --- Logical Sectors Written +0x01 0x028 6 25179011014 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1148 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KLEVV/NEO N400/NEO N400 SSD 240GB/6317BA7CD86B b/SSD/KLEVV/NEO N400/NEO N400 SSD 240GB/6317BA7CD86B new file mode 100644 index 000000000..9bef878d1 --- /dev/null +++ b/SSD/KLEVV/NEO N400/NEO N400 SSD 240GB/6317BA7CD86B @@ -0,0 +1,157 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 15.0-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KLEVV NEO N400 SSD 240GB +Serial Number: -- +Firmware Version: SBFME1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Dec 28 22:17:25 2025 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 14607 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2960 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 50 +173 Unknown_Attribute -O--C- 100 100 000 - 8716436 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 325 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 86 +241 Total_LBAs_Written -O--C- 100 100 000 - 17866 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 13259 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2960 --- Lifetime Power-On Resets +0x01 0x010 4 14607 --- Power-on Hours +0x01 0x018 6 37469452057 --- Logical Sectors Written +0x01 0x028 6 32489502263 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 19056 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KeepData/GIM/GIM128/4228B7CE4D0B b/SSD/KeepData/GIM/GIM128/4228B7CE4D0B new file mode 100644 index 000000000..801054418 --- /dev/null +++ b/SSD/KeepData/GIM/GIM128/4228B7CE4D0B @@ -0,0 +1,148 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GIM128 +Serial Number: -- +Firmware Version: U0510A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 10 22:21:56 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 20575 + 12 Power_Cycle_Count -O--CK 100 100 050 - 314 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 94387 +165 Unknown_Attribute -O--CK 100 100 050 - 523 +166 Unknown_Attribute -O--CK 100 100 050 - 373 +167 Unknown_Attribute -O--CK 100 100 050 - 467 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 91 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 280 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 785682 +242 Total_LBAs_Read ----CK 100 100 050 - 50523 +245 Unknown_Attribute -O--CK 100 100 050 - 994381 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 314 --- Lifetime Power-On Resets +0x01 0x010 4 20575 --- Power-on Hours +0x01 0x018 6 4245879272 --- Logical Sectors Written +0x01 0x020 6 717043059 --- Number of Write Commands +0x01 0x028 6 3311134553 --- Logical Sectors Read +0x01 0x030 6 81935049 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KeepData/GIM/GIM128/CF785F7F3322 b/SSD/KeepData/GIM/GIM128/CF785F7F3322 new file mode 100644 index 000000000..cead87120 --- /dev/null +++ b/SSD/KeepData/GIM/GIM128/CF785F7F3322 @@ -0,0 +1,148 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GIM128 +Serial Number: -- +Firmware Version: U0510A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jan 18 20:06:27 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 7 + 12 Power_Cycle_Count -O--CK 100 100 050 - 13 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 10 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 159 +242 Total_LBAs_Read ----CK 100 100 050 - 30 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 7 --- Power-on Hours +0x01 0x018 6 10436496 --- Logical Sectors Written +0x01 0x020 6 97575 --- Number of Write Commands +0x01 0x028 6 2031410 --- Logical Sectors Read +0x01 0x030 6 38664 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KeepData/GIM/GIM128/EBA6DBFB8633 b/SSD/KeepData/GIM/GIM128/EBA6DBFB8633 new file mode 100644 index 000000000..50d3db308 --- /dev/null +++ b/SSD/KeepData/GIM/GIM128/EBA6DBFB8633 @@ -0,0 +1,149 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: GIM128 +Serial Number: -- +Firmware Version: U0510A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 21 18:06:47 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 20959 + 12 Power_Cycle_Count -O--CK 100 100 050 - 94 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 175872 +165 Unknown_Attribute -O--CK 100 100 050 - 924 +166 Unknown_Attribute -O--CK 100 100 050 - 774 +167 Unknown_Attribute -O--CK 100 100 050 - 853 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 84 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 71 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 480382 +242 Total_LBAs_Read ----CK 100 100 050 - 4204 +245 Unknown_Attribute -O--CK 100 100 050 - 3170789 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 94 --- Lifetime Power-On Resets +0x01 0x010 4 20959 --- Power-on Hours +0x01 0x018 6 1417545132 --- Logical Sectors Written +0x01 0x020 6 449619077 --- Number of Write Commands +0x01 0x028 6 275513385 --- Logical Sectors Read +0x01 0x030 6 10800787 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kimtigo/C-SSD/C-SSD 250GB/3E614817A3F7 b/SSD/Kimtigo/C-SSD/C-SSD 250GB/3E614817A3F7 new file mode 100644 index 000000000..185d04495 --- /dev/null +++ b/SSD/Kimtigo/C-SSD/C-SSD 250GB/3E614817A3F7 @@ -0,0 +1,110 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: kimtigo C-SSD 250GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN08413 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 14 23:33:49 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0 + 8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 371 + 10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 72 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 +169 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 917552 +171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 +173 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 17181310983 +175 Program_Fail_Count_Chip 0x0022 100 100 010 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 522 +187 Reported_Uncorrect 0x0032 100 000 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 55 +194 Temperature_Celsius 0x0022 039 039 000 Old_age Always - 39 (Min/Max 25/42) +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +209 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 1 +210 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 68 +211 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 18 +231 Unknown_SSD_Attribute 0x0023 100 100 005 Pre-fail Always - 0 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 619 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 868 +243 Unknown_Attribute 0x0032 050 050 000 Old_age Always - 50 +247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 308 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/Kimtigo/SSD/SSD 256GB/872B9A66A99E b/SSD/Kimtigo/SSD/SSD 256GB/872B9A66A99E new file mode 100644 index 000000000..323d5c86a --- /dev/null +++ b/SSD/Kimtigo/SSD/SSD 256GB/872B9A66A99E @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: kimtigo SSD 256GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN13132 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jun 11 12:52:04 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 50 + 9 Power_On_Hours ------+ 100 100 000 - 6563 + 12 Power_Cycle_Count ------+ 100 100 000 - 42 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 214751772716 +171 Unknown_Attribute ------+ 000 000 000 - 7 +172 Unknown_Attribute ------+ 000 000 000 - 0 +173 Unknown_Attribute ------+ 200 200 000 - 21477589014 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 097 097 000 - 72 +187 Reported_Uncorrect ------+ 097 000 000 - 0 +192 Power-Off_Retract_Count ------+ 100 100 000 - 20 +194 Temperature_Celsius ------+ 035 035 000 - 35 (Min/Max 27/43) +196 Reallocated_Event_Count ------+ 100 100 000 - 0 +206 Unknown_SSD_Attribute ------+ 200 200 000 - 5 +207 Unknown_SSD_Attribute ------+ 200 200 000 - 42 +208 Unknown_SSD_Attribute ------+ 200 200 000 - 22 +209 Unknown_SSD_Attribute ------+ 200 200 000 - 1 +210 Unknown_Attribute ------+ 200 200 000 - 34 +211 Unknown_Attribute ------+ 200 200 000 - 20 +231 Unknown_SSD_Attribute ------+ 098 098 005 - 512 +241 Total_LBAs_Written ------+ 100 100 000 - 698 +242 Total_LBAs_Read ------+ 100 100 000 - 93 +245 Unknown_Attribute ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/39 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (429) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 42 --- Lifetime Power-On Resets +0x01 0x010 4 6563 --- Power-on Hours +0x01 0x018 6 1464344766 --- Logical Sectors Written +0x01 0x020 6 27111144 --- Number of Write Commands +0x01 0x028 6 197127318 --- Logical Sectors Read +0x01 0x030 6 3963177 --- Number of Read Commands +0x01 0x038 6 2268011490296 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 39 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingDian/S280/S280-120GB/641568822200 b/SSD/KingDian/S280/S280-120GB/641568822200 new file mode 100644 index 000000000..782089f2f --- /dev/null +++ b/SSD/KingDian/S280/S280-120GB/641568822200 @@ -0,0 +1,197 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingDian S280-120GB +Serial Number: -- +Firmware Version: Q0202A +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon May 5 22:40:39 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown (0xe001) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 1202197 + 12 Power_Cycle_Count ------ 100 100 000 - 3165 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 175 +163 Unknown_Attribute ------ 100 100 000 - 12 +164 Unknown_Attribute ------ 100 100 000 - 291823 +165 Unknown_Attribute ------ 100 100 000 - 160 +166 Unknown_Attribute ------ 100 100 000 - 59 +167 Unknown_Attribute ------ 100 100 000 - 113 +168 Unknown_Attribute ------ 100 100 000 - 1000 +169 Unknown_Attribute ------ 100 100 000 - 89 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 1079 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 230 +194 Temperature_Celsius ------ 100 100 000 - 14 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 6 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 721204 +242 Total_LBAs_Read ------ 100 100 000 - 730724 +245 Unknown_Attribute ------ 100 100 000 - 291823 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (0) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3165 --- Lifetime Power-On Resets +0x01 0x010 4 1202197 --- Power-on Hours +0x01 0x018 6 20222403 --- Logical Sectors Written +0x01 0x020 6 719188638 --- Number of Write Commands +0x01 0x028 6 644116796 --- Logical Sectors Read +0x01 0x030 6 773014614 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1733423 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 44209 --- Number of Hardware Resets +0x06 0x018 4 6 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingFast/SSD/SSD 120GB/06D413AF8585 b/SSD/KingFast/SSD/SSD 120GB/06D413AF8585 new file mode 100644 index 000000000..f4167ff74 --- /dev/null +++ b/SSD/KingFast/SSD/SSD 120GB/06D413AF8585 @@ -0,0 +1,147 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: T0317A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 23 19:03:22 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 167 + 12 Power_Cycle_Count -O--CK 100 100 050 - 117 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 119 +165 Unknown_Attribute -O--CK 100 100 050 - 8 +166 Unknown_Attribute -O--CK 100 100 050 - 6 +167 Unknown_Attribute -O--CK 100 100 050 - 6 +168 Unknown_Attribute -O--CK 100 100 050 - 2000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 98 +194 Temperature_Celsius -O---K 100 100 050 - 48 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7278 +242 Total_LBAs_Read ----CK 100 100 050 - 704 +245 Unknown_Attribute -O--CK 100 100 050 - 3505 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 117 --- Lifetime Power-On Resets +0x01 0x010 4 167 --- Power-on Hours +0x01 0x018 6 477026870 --- Logical Sectors Written +0x01 0x020 6 3139744 --- Number of Write Commands +0x01 0x028 6 46164861 --- Logical Sectors Read +0x01 0x030 6 881296 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingFast/SSD/SSD 16GB/C8F2EFADA009 b/SSD/KingFast/SSD/SSD 16GB/C8F2EFADA009 new file mode 100644 index 000000000..241e2c3a8 --- /dev/null +++ b/SSD/KingFast/SSD/SSD 16GB/C8F2EFADA009 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based OEM SSDs +Device Model: KingFast +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: P0725A +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 15 10:13:58 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0xd3) Offline data collection activity + is in a Vendor Specific state. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 30) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: (58373) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK+ 100 100 050 - 259493334089728 + 5 Reallocated_Sector_Ct -O----+ 100 100 050 - 0 (769 0) + 9 Power_On_Hours P-----+ 100 100 050 - 4576 (2 0 1) + 12 Power_Cycle_Count ------+ 100 100 050 - 8796193686795 +160 Uncorrectable_Error_Cnt -O----+ 100 100 050 - 436341762 +161 Valid_Spare_Block_Cnt ------+ 100 100 050 - 34359738394 +162 Unknown_Attribute POSRCK+ 100 100 050 - 6068788789249 +163 Initial_Bad_Block_Count ---RCK+ 100 100 050 - 194411694653452 +164 Total_Erase_Count P-----+ 100 100 050 - 4311481360 +165 Max_Erase_Count ------+ 100 100 050 - 32766 +166 Min_Erase_Count ------ 100 100 050 - 137438986238 +167 Average_Erase_Count ------+ 100 100 050 - 34359770622 +168 Max_Erase_Count_of_Spec ------ 100 100 050 - 3000 +169 Remaining_Lifetime_Perc ------ 049 049 050 NOW 4294966321 +192 Power-Off_Retract_Count ------ 100 100 050 - 209078398445064 +194 Temperature_Celsius POSRC-+ 100 100 050 - 40 (43 104 0 0 0) +195 Hardware_ECC_Recovered -OSRCK+ 100 100 050 - 92093199005491 +196 Reallocated_Event_Count ---R-K+ 100 100 050 - 0 (35972 0) +199 UDMA_CRC_Error_Count -O---K+ 100 100 050 - 138650134249472 + 33 Unknown_Attribute P-SR--+ 100 100 --- - 76471892705280 +241 Host_Writes_32MiB P-SRC-+ 100 100 050 - 58113977622861 +242 Host_Reads_32MiB -OSR--+ 100 100 050 - 72078723169629 +245 TLC_Writes_32MiB -OS---+ 100 100 050 - 196182121712103 + 45 Unknown_Attribute -OS---+ 149 139 --- - 112397040563104 + 12 Power_Cycle_Count POSR-K+ 202 127 050 - 156825023186975 +118 Unknown_Attribute PO-RC-+ 173 127 --- - 278971999905183 +253 Unknown_Attribute P-SRCK+ 152 237 --- - 215859834000569 +116 Unknown_Attribute -OS--K+ 127 118 --- - 146985117963203 + 72 Unknown_Attribute PO----+ 190 156 --- - 203161155319204 + 43 Unknown_Attribute --SRCK+ 000 153 --- - 152882712835548 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Invalid Error Log index = 0xccca (reserved = 0x9b) +Device Error Count: 4664 (possibly also invalid) + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 1 (1 sectors) +Invalid Self-test Log index = 0x0162 (reserved = 0x00) +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 100664587 --- Lifetime Power-On Resets +0x01 0x010 4 16781792 --- Power-on Hours +0x01 0x018 6 558715301 --- Logical Sectors Written +0x01 0x020 6 3765113067 --- Number of Write Commands +0x01 0x028 6 3177030340 --- Logical Sectors Read +0x01 0x030 6 3098365573 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 436341762 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3916156721 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 -110 --- Average Long Term Temperature +0x05 0x020 1 -59 --- Highest Temperature +0x05 0x028 1 40 --- Lowest Temperature +0x05 0x030 1 -1 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 -1 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 64 --- Time in Over-Temperature +0x05 0x058 1 100 --- Specified Maximum Operating Temperature +0x05 0x060 4 16 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1722464667 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 51 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingFast/SSD/SSD 256GB/327FC364022C b/SSD/KingFast/SSD/SSD 256GB/327FC364022C new file mode 100644 index 000000000..5dfce9b20 --- /dev/null +++ b/SSD/KingFast/SSD/SSD 256GB/327FC364022C @@ -0,0 +1,308 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HT3618C1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Mar 13 22:51:16 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1377 + 12 Power_Cycle_Count -O--CK 100 100 050 - 67 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 1380 +163 Unknown_Attribute -O--CK 100 100 050 - 166 +164 Unknown_Attribute -O--CK 100 100 050 - 6 +165 Unknown_Attribute -O--CK 100 100 050 - 8 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 4 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 58 +177 Wear_Leveling_Count -O--CK 100 100 050 - 96613 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 50 +194 Temperature_Celsius -O--CK 100 100 050 - 46 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written -O--CK 100 100 050 - 9160 +242 Total_LBAs_Read -O--CK 100 100 050 - 7872 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 867 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 867 [2] occurred at disk power-on lifetime: 1357 hours (56 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 e8 00 04 70 00 0b 60 00 00 at LBA = 0x470000b60 = 19058920288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 70 00 e8 00 04 70 00 0b 60 40 08 03:07:46.260 READ FPDMA QUEUED + 60 00 b8 00 e0 00 04 71 00 0b 68 40 08 03:07:46.260 READ FPDMA QUEUED + 60 00 98 00 d8 00 04 70 00 0b d0 40 08 03:07:46.260 READ FPDMA QUEUED + 60 00 08 00 d0 00 05 e8 00 49 18 40 08 03:07:46.260 READ FPDMA QUEUED + 60 00 08 00 c8 00 03 05 00 10 48 40 08 03:07:46.260 READ FPDMA QUEUED + +Error 866 [1] occurred at disk power-on lifetime: 1353 hours (56 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 68 00 01 c5 00 e0 e8 00 00 at LBA = 0x1c500e0e8 = 7600136424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 68 00 01 c5 00 e0 e8 40 08 00:00:38.050 READ FPDMA QUEUED + 60 00 f0 00 60 00 01 f4 00 e5 b8 40 08 00:00:38.050 READ FPDMA QUEUED + 60 01 00 00 58 00 01 d4 00 dd 50 40 08 00:00:38.040 READ FPDMA QUEUED + 60 01 00 00 50 00 01 2f 00 ec 10 40 08 00:00:38.030 READ FPDMA QUEUED + 60 00 80 00 48 00 01 2e 00 ec 90 40 08 00:00:38.030 READ FPDMA QUEUED + +Error 865 [0] occurred at disk power-on lifetime: 1342 hours (55 days + 22 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 68 00 06 f7 00 9a 70 00 00 at LBA = 0x6f7009a70 = 29913815664 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 68 00 06 f7 00 9a 70 40 08 06:58:54.970 READ FPDMA QUEUED + 60 00 20 00 a8 00 0c d6 00 68 50 40 08 06:58:54.970 READ FPDMA QUEUED + 60 01 00 00 60 00 06 1a 00 9b 90 40 08 06:58:54.970 READ FPDMA QUEUED + 60 00 08 00 58 00 0c ad 00 a2 50 40 08 06:58:54.970 READ FPDMA QUEUED + 60 01 00 00 10 00 06 25 00 9b e0 40 08 06:58:54.970 READ FPDMA QUEUED + +Error 864 [3] occurred at disk power-on lifetime: 1342 hours (55 days + 22 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 40 00 78 00 01 80 00 df 10 00 00 at LBA = 0x18000df10 = 6442508048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 78 00 01 80 00 df 10 40 08 06:58:47.890 READ FPDMA QUEUED + 60 00 80 00 70 00 01 7f 00 df 90 40 08 06:58:47.890 READ FPDMA QUEUED + 60 00 40 00 68 00 01 7f 00 df 50 40 08 06:58:47.890 READ FPDMA QUEUED + 60 00 20 00 60 00 01 7f 00 df 30 40 08 06:58:47.890 READ FPDMA QUEUED + 60 01 00 00 58 00 01 53 00 df 10 40 08 06:58:47.870 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 21 - +# 2 Offline Self-test routine in progress 10% 21 - +# 3 Offline Self-test routine in progress 10% 21 - +# 4 Offline Self-test routine in progress 10% 21 - +# 5 Offline Self-test routine in progress 10% 21 - +# 6 Offline Self-test routine in progress 10% 21 - +# 7 Offline Self-test routine in progress 10% 21 - +# 8 Offline Self-test routine in progress 10% 21 - +# 9 Offline Self-test routine in progress 10% 21 - +#10 Offline Self-test routine in progress 10% 21 - +#11 Offline Self-test routine in progress 10% 21 - +#12 Offline Self-test routine in progress 10% 21 - +#13 Offline Self-test routine in progress 10% 21 - +#14 Offline Self-test routine in progress 10% 21 - +#15 Offline Self-test routine in progress 10% 21 - +#16 Offline Self-test routine in progress 10% 21 - +#17 Offline Self-test routine in progress 10% 21 - +#18 Offline Self-test routine in progress 10% 21 - +#19 Offline Self-test routine in progress 10% 21 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x010 4 1377 --- Power-on Hours +0x01 0x018 6 600309760 --- Logical Sectors Written +0x01 0x020 6 14953563 --- Number of Write Commands +0x01 0x028 6 515899392 --- Logical Sectors Read +0x01 0x030 6 6968855 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 659 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1580 Device-to-host register FISes sent due to a COMRESET +0x000b 2 1334 CRC errors within host-to-device FIS +0x000d 2 1334 Non-CRC errors within host-to-device FIS + diff --git a/SSD/KingFast/SSD/SSD 256GB/41E5CAD5D0A6 b/SSD/KingFast/SSD/SSD 256GB/41E5CAD5D0A6 new file mode 100644 index 000000000..902174bde --- /dev/null +++ b/SSD/KingFast/SSD/SSD 256GB/41E5CAD5D0A6 @@ -0,0 +1,186 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: V1.1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Dec 20 00:57:44 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 968 + 12 Power_Cycle_Count -O--C- 100 100 000 - 39 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 852013 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 12888703000 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 363 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 18 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50) +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 3 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 58 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 24 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 10 +211 Unknown_Attribute -O--CK 200 200 000 - 6 +231 Unknown_SSD_Attribute PO---K 099 099 005 - 1 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 5874917376 +234 Unknown_Attribute -O--CK 100 100 000 - 8757178616 +241 Total_LBAs_Written -O--CK 100 100 000 - 1437048240 +242 Total_LBAs_Read -O--CK 100 100 000 - 464912839 +243 Unknown_Attribute -O--CK 050 050 000 - 229707185 +245 Unknown_Attribute -O--CK 100 100 000 - 50 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (187) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 39 -D- Lifetime Power-On Resets +0x01 0x010 4 968 -D- Power-on Hours +0x01 0x018 6 1437048240 -D- Logical Sectors Written +0x01 0x020 6 17694959 -D- Number of Write Commands +0x01 0x028 6 464912839 -D- Logical Sectors Read +0x01 0x030 6 2157940 -D- Number of Read Commands +0x01 0x038 6 853735287608 -D- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 ND- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingFast/SSD/SSD 256GB/5B4250FF61C6 b/SSD/KingFast/SSD/SSD 256GB/5B4250FF61C6 new file mode 100644 index 000000000..da41da5bf --- /dev/null +++ b/SSD/KingFast/SSD/SSD 256GB/5B4250FF61C6 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: SBFQ61I3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon May 5 06:37:22 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9598 + 12 Power_Cycle_Count -O--C- 100 100 000 - 454 +161 Unknown_Attribute -O--C- 100 100 000 - 153 +163 Unknown_Attribute PO---- 100 100 050 - 143 +165 Unknown_Attribute ------ 100 100 000 - 63 +166 Unknown_Attribute ------ 100 100 000 - 10 +167 Unknown_Attribute ------ 100 100 000 - 30 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 166 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 4515 +242 Total_LBAs_Read -O--C- 100 100 000 - 2487 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8794 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 454 --- Lifetime Power-On Resets +0x01 0x010 4 9598 --- Power-on Hours +0x01 0x018 6 9469862434 --- Logical Sectors Written +0x01 0x028 6 5216388177 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2264 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingFast/SSD/SSD 256GB/FC18FCA2F0F2 b/SSD/KingFast/SSD/SSD 256GB/FC18FCA2F0F2 new file mode 100644 index 000000000..7eedef53d --- /dev/null +++ b/SSD/KingFast/SSD/SSD 256GB/FC18FCA2F0F2 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: X0124A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 12 12:45:07 2025 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 8354 + 12 Power_Cycle_Count -O--CK 100 100 050 - 108 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 103806 +165 Unknown_Attribute -O--CK 100 100 050 - 314 +166 Unknown_Attribute -O--CK 100 100 050 - 13 +167 Unknown_Attribute -O--CK 100 100 050 - 208 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 96 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 103 +194 Temperature_Celsius -O---K 100 100 050 - 52 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1687575 +242 Total_LBAs_Read ----CK 100 100 050 - 316955 +245 Unknown_Attribute -O--CK 100 100 050 - 919578 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 52/52 Celsius +Lifetime Min/Max Temperature: 27/59 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 108 --- Lifetime Power-On Resets +0x01 0x010 4 8354 --- Power-on Hours +0x01 0x018 6 3222789283 --- Logical Sectors Written +0x01 0x020 6 1371734192 --- Number of Write Commands +0x01 0x028 6 3592130897 --- Logical Sectors Read +0x01 0x030 6 164391123 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingFast/SSD/SSD 32GB/1699E365B664 b/SSD/KingFast/SSD/SSD 32GB/1699E365B664 new file mode 100644 index 000000000..603709673 --- /dev/null +++ b/SSD/KingFast/SSD/SSD 32GB/1699E365B664 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 11.56.00 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 22:16:25 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +No failed Attributes found. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 1 + 9 Power_On_Hours -O---- 100 100 000 - 681 + 12 Power_Cycle_Count -O---- 100 100 000 - 0 +171 Unknown_Attribute -O---- 100 100 000 - 0 +172 Unknown_Attribute -O---- 100 100 000 - 0 +173 Unknown_Attribute -O---- 100 100 000 - 1010 +174 Unknown_Attribute -O---- 100 100 000 - 0 +187 Reported_Uncorrect -O---- 100 100 000 - 0 +230 Unknown_SSD_Attribute -O---- 100 100 000 - 3366 +232 Available_Reservd_Space PO---- 095 100 005 - 0 +234 Unknown_Attribute -O---- 100 100 000 - 10000 +241 Total_LBAs_Written -O---- 100 100 000 - 0 +242 Total_LBAs_Read -O---- 100 100 000 - 22645 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Input/output error +Read GP Log Directory failed + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Read SMART Self-test Log failed: Input/output error + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/KingFast/SSD/SSD 512GB/6CD79E146B26 b/SSD/KingFast/SSD/SSD 512GB/6CD79E146B26 new file mode 100644 index 000000000..4488a2efc --- /dev/null +++ b/SSD/KingFast/SSD/SSD 512GB/6CD79E146B26 @@ -0,0 +1,159 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: X0719A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 27 11:36:19 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1 + 12 Power_Cycle_Count -O--CK 100 100 050 - 49 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 3838 +165 Unknown_Attribute -O--CK 100 100 050 - 9 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 2 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 14718 +242 Total_LBAs_Read ----CK 100 100 050 - 14591 +245 Unknown_Attribute -O--CK 100 100 050 - 12432 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 27/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 1 --- Power-on Hours +0x01 0x018 6 964616045 --- Logical Sectors Written +0x01 0x020 6 3839534 --- Number of Write Commands +0x01 0x028 6 956253522 --- Logical Sectors Read +0x01 0x030 6 5290938 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingFast/SSD/SSD 512GB/E3BDCD117ED3 b/SSD/KingFast/SSD/SSD 512GB/E3BDCD117ED3 new file mode 100644 index 000000000..5f5841018 --- /dev/null +++ b/SSD/KingFast/SSD/SSD 512GB/E3BDCD117ED3 @@ -0,0 +1,176 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: X0719A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 17 20:02:03 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 676 + 12 Power_Cycle_Count -O--CK 100 100 050 - 11 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 7 +164 Unknown_Attribute -O--CK 100 100 050 - 620 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 7 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 3 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 2607 +242 Total_LBAs_Read ----CK 100 100 050 - 501 +245 Unknown_Attribute -O--CK 100 100 050 - 12 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] log entry is empty +Error 2 [1] log entry is empty +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 37/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 676 --- Power-on Hours +0x01 0x018 6 170878570 --- Logical Sectors Written +0x01 0x020 6 3354164 --- Number of Write Commands +0x01 0x028 6 32859770 --- Logical Sectors Read +0x01 0x030 6 524263 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingShare/SSD/SSD 240GB/950EA4171274 b/SSD/KingShare/SSD/SSD 240GB/950EA4171274 new file mode 100644 index 000000000..017804333 --- /dev/null +++ b/SSD/KingShare/SSD/SSD 240GB/950EA4171274 @@ -0,0 +1,208 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSHARE SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: FW200807 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 30 22:46:36 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3485 + 12 Power_Cycle_Count -O--CK 100 100 050 - 827 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +163 Unknown_Attribute -O--CK 100 100 050 - 734 +164 Unknown_Attribute -O--CK 100 100 050 - 23 +165 Unknown_Attribute -O--CK 100 100 050 - 87 +166 Unknown_Attribute -O--CK 100 100 050 - 11 +167 Unknown_Attribute -O--CK 100 100 050 - 44 +168 Unknown_Attribute -O--CK 100 100 050 - 0 +169 Unknown_Attribute -O--CK 100 100 050 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 3121 +177 Wear_Leveling_Count -O--CK 100 100 050 - 33938 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 16 +194 Temperature_Celsius -O--CK 100 100 050 - 45 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 23667 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 050 - 10624 +242 Total_LBAs_Read -O--CK 100 100 050 - 2706 +249 Unknown_Attribute -O--CK 100 100 050 - 11638 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 827 --- Lifetime Power-On Resets +0x01 0x010 4 3485 --- Power-on Hours +0x01 0x018 6 696254464 --- Logical Sectors Written +0x01 0x020 6 10298236 --- Number of Write Commands +0x01 0x028 6 177340416 --- Logical Sectors Read +0x01 0x030 6 2441563 --- Number of Read Commands + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0009 4 878 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1717 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/KingSpec/MT/MT-128/195B06EF857D b/SSD/KingSpec/MT/MT-128/195B06EF857D new file mode 100644 index 000000000..988d1b87f --- /dev/null +++ b/SSD/KingSpec/MT/MT-128/195B06EF857D @@ -0,0 +1,182 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-128 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN08979 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 30 22:04:38 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 31733 + 12 Power_Cycle_Count -O--C- 100 100 000 - 75 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 0 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 1352949301701 +174 Unknown_Attribute -O---K 100 100 000 - 0 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 91 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 56 +194 Temperature_Celsius -O---K 037 037 000 - 37 (Min/Max 28/41) +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 315 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 528 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 453 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 39890 +211 Unknown_Attribute -O--CK 200 200 000 - 22351 +231 Unknown_SSD_Attribute PO---K 070 070 005 - 30 +241 Total_LBAs_Written -O--CK 100 100 000 - 42533 +242 Total_LBAs_Read -O--CK 100 100 000 - 20 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/38 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (285) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 75 --- Lifetime Power-On Resets +0x01 0x010 4 31733 --- Power-on Hours +0x01 0x018 6 89200217181 --- Logical Sectors Written +0x01 0x020 6 3743075447 --- Number of Write Commands +0x01 0x028 6 43462635 --- Logical Sectors Read +0x01 0x030 6 1139342 --- Number of Read Commands +0x01 0x038 6 29238391274876 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 70 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/MT/MT-128/2002B91AEF53 b/SSD/KingSpec/MT/MT-128/2002B91AEF53 new file mode 100644 index 000000000..3f8d629b0 --- /dev/null +++ b/SSD/KingSpec/MT/MT-128/2002B91AEF53 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 1.00 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 13 01:02:01 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 20079 + 12 Power_Cycle_Count ------ 100 100 000 - 52 +160 Unknown_Attribute ------ 100 100 000 - 1 +161 Unknown_Attribute ------ 100 100 000 - 0 +163 Unknown_Attribute ------ 100 100 000 - 0 +164 Unknown_Attribute ------ 100 100 000 - 14023 +165 Unknown_Attribute ------ 100 100 000 - 49 +166 Unknown_Attribute ------ 100 100 000 - 2 +167 Unknown_Attribute ------ 100 100 000 - 28 +192 Power-Off_Retract_Count ------ 100 100 000 - 42 +194 Temperature_Celsius ------ 100 100 000 - 33 +195 Hardware_ECC_Recovered ------ 100 100 000 - 847783 +196 Reallocated_Event_Count ------ 100 100 000 - 10 +241 Total_LBAs_Written ------ 100 100 000 - 47036 +242 Total_LBAs_Read ------ 100 100 000 - 1379 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 20079 --- Power-on Hours +0x01 0x018 6 3082592753 --- Logical Sectors Written +0x01 0x028 6 90389982 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 27 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 26 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/MT/MT-128/6D9576184A8E b/SSD/KingSpec/MT/MT-128/6D9576184A8E new file mode 100644 index 000000000..b3b5dcd0e --- /dev/null +++ b/SSD/KingSpec/MT/MT-128/6D9576184A8E @@ -0,0 +1,147 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-128 +Serial Number: -- +Firmware Version: U0330A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jun 6 10:50:15 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4123 + 12 Power_Cycle_Count -O--CK 100 100 050 - 19 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 6 +164 Unknown_Attribute -O--CK 100 100 050 - 672301 +165 Unknown_Attribute -O--CK 100 100 050 - 4479 +166 Unknown_Attribute -O--CK 100 100 050 - 83 +167 Unknown_Attribute -O--CK 100 100 050 - 1070 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 79 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 54 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 268266 +242 Total_LBAs_Read ----CK 100 100 050 - 22433 +245 Unknown_Attribute -O--CK 100 100 050 - 3155955 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 19 --- Lifetime Power-On Resets +0x01 0x010 4 4123 --- Power-on Hours +0x01 0x018 6 401270983 --- Logical Sectors Written +0x01 0x020 6 125254087 --- Number of Write Commands +0x01 0x028 6 1470198307 --- Logical Sectors Read +0x01 0x030 6 4339570 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/MT/MT-128/70C16F484DE9 b/SSD/KingSpec/MT/MT-128/70C16F484DE9 new file mode 100644 index 000000000..87c019022 --- /dev/null +++ b/SSD/KingSpec/MT/MT-128/70C16F484DE9 @@ -0,0 +1,183 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-128 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: T181222 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Mar 12 16:13:35 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 37015 + 12 Power_Cycle_Count -O--C- 100 100 000 - 310 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 097 097 010 - 2162699 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 240541237469 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 1239 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 296 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50) +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 56 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 352 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 221 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2268 +210 Unknown_Attribute -O--CK 200 200 000 - 9858 +211 Unknown_Attribute -O--CK 200 200 000 - 8126 +231 Unknown_SSD_Attribute PO---K 086 086 005 - 14 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 154086257920 +234 Unknown_Attribute -O--CK 100 100 000 - 696047158 +241 Total_LBAs_Written -O--CK 100 100 000 - 47693758315 +242 Total_LBAs_Read -O--CK 100 100 000 - 932139612 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (182) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 310 --- Lifetime Power-On Resets +0x01 0x010 4 37015 --- Power-on Hours +0x01 0x018 6 47693758315 --- Logical Sectors Written +0x01 0x020 6 485175145 --- Number of Write Commands +0x01 0x028 6 932139612 --- Logical Sectors Read +0x01 0x030 6 33160916 --- Number of Read Commands +0x01 0x038 6 34110740297056 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 46 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/MT/MT-1TB/15AD8ED51614 b/SSD/KingSpec/MT/MT-1TB/15AD8ED51614 new file mode 100644 index 000000000..6d871a7a8 --- /dev/null +++ b/SSD/KingSpec/MT/MT-1TB/15AD8ED51614 @@ -0,0 +1,160 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-1TB +Serial Number: -- +Firmware Version: W0704A0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 25 08:30:31 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 230 + 12 Power_Cycle_Count -O--CK 100 100 050 - 35 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 136 +164 Unknown_Attribute -O--CK 100 100 050 - 21776 +165 Unknown_Attribute -O--CK 100 100 050 - 27 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 8 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 24 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 69721 +242 Total_LBAs_Read ----CK 100 100 050 - 1444 +245 Unknown_Attribute -O--CK 100 100 050 - 49944 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 196 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 29/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x010 4 230 --- Power-on Hours +0x01 0x018 6 274315419 --- Logical Sectors Written +0x01 0x020 6 44128129 --- Number of Write Commands +0x01 0x028 6 94650702 --- Logical Sectors Read +0x01 0x030 6 1514729 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 48 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/MT/MT-256/197FCC28909E b/SSD/KingSpec/MT/MT-256/197FCC28909E new file mode 100644 index 000000000..e576c17bc --- /dev/null +++ b/SSD/KingSpec/MT/MT-256/197FCC28909E @@ -0,0 +1,173 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-256 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN14941 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Apr 21 17:37:05 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 3 + 12 Power_Cycle_Count ------+ 100 100 000 - 18 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 131076 +173 Unknown_Attribute ------+ 200 200 000 - 4295098369 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 186 +192 Power-Off_Retract_Count ------+ 100 100 000 - 16 +194 Temperature_Celsius ------+ 034 034 000 - 34 (Min/Max 27/37) +231 Unknown_SSD_Attribute ------+ 100 100 005 - 0 +233 Media_Wearout_Indicator ------+ 100 100 000 - 18 +234 Unknown_Attribute ------+ 100 100 005 - 1200 +241 Total_LBAs_Written ------+ 100 100 000 - 18 +242 Total_LBAs_Read ------+ 100 100 000 - 8 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: ?/37 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (49) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 38137078 --- Logical Sectors Written +0x01 0x020 6 427014 --- Number of Write Commands +0x01 0x028 6 18115639 --- Logical Sectors Read +0x01 0x030 6 214936 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/MT/MT-64/DAC6824C4A14 b/SSD/KingSpec/MT/MT-64/DAC6824C4A14 new file mode 100644 index 000000000..235ee46cd --- /dev/null +++ b/SSD/KingSpec/MT/MT-64/DAC6824C4A14 @@ -0,0 +1,93 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MT-64 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: Q0927A +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Feb 6 21:56:17 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0000 100 100 050 Old_age Offline - 0 + 5 Reallocated_Sector_Ct 0x0002 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0000 100 100 050 Old_age Offline - 3116 + 12 Power_Cycle_Count 0x0000 100 100 050 Old_age Offline - 1155 +160 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 0 +161 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 57 +162 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1 +163 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 4 +164 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 26220 +165 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 35 +166 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 17 +167 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 25 +168 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 3000 +169 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 100 +192 Power-Off_Retract_Count 0x0000 100 100 050 Old_age Offline - 155 +194 Temperature_Celsius 0x0000 100 100 050 Old_age Offline - 37 +195 Hardware_ECC_Recovered 0x0000 100 100 050 Old_age Offline - 43191 +196 Reallocated_Event_Count 0x0000 100 100 050 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 +241 Total_LBAs_Written 0x0000 100 100 050 Old_age Offline - 31900 +242 Total_LBAs_Read 0x0000 100 100 050 Old_age Offline - 19949 +245 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 47776 + +SMART Error Log Version: 1 +No Errors Logged + +Warning! SMART Self-Test Log Structure error: invalid SMART checksum. +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/KingSpec/NT-128/NT-128 2242/7FF15EAD62E2 b/SSD/KingSpec/NT-128/NT-128 2242/7FF15EAD62E2 new file mode 100644 index 000000000..5387cc7ad --- /dev/null +++ b/SSD/KingSpec/NT-128/NT-128 2242/7FF15EAD62E2 @@ -0,0 +1,173 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NT-128 2242 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN14941 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Apr 9 20:01:54 2025 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 2 + 12 Power_Cycle_Count ------+ 100 100 000 - 9 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 131076 +173 Unknown_Attribute ------+ 200 200 000 - 4295098369 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 92 +192 Power-Off_Retract_Count ------+ 100 100 000 - 9 +194 Temperature_Celsius ------+ 033 033 000 - 33 (Min/Max 27/34) +231 Unknown_SSD_Attribute ------+ 100 100 005 - 0 +233 Media_Wearout_Indicator ------+ 100 100 000 - 10 +234 Unknown_Attribute ------+ 100 100 005 - 188 +241 Total_LBAs_Written ------+ 100 100 000 - 10 +242 Total_LBAs_Read ------+ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: ?/34 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (55) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 2 --- Power-on Hours +0x01 0x018 6 22289682 --- Logical Sectors Written +0x01 0x020 6 665539 --- Number of Write Commands +0x01 0x028 6 1951247 --- Logical Sectors Read +0x01 0x030 6 62350 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/NT-256/NT-256 2242/2D0591742C66 b/SSD/KingSpec/NT-256/NT-256 2242/2D0591742C66 new file mode 100644 index 000000000..c24275ae3 --- /dev/null +++ b/SSD/KingSpec/NT-256/NT-256 2242/2D0591742C66 @@ -0,0 +1,326 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 15.0-CURRENT amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NT-256 2242 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN13109 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 3 20:44:49 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 16 + 9 Power_On_Hours -O--C- 100 100 000 - 11725 + 12 Power_Cycle_Count -O--C- 100 100 000 - 306 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 161 +169 Unknown_Attribute PO--C- 100 100 010 - 68720787472 +173 Unknown_Attribute -O--C- 200 200 000 - 1718074999946 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 096 096 000 - 10 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 207 +194 Temperature_Celsius -O---K 038 038 000 - 38 (Min/Max 26/47) +231 Unknown_SSD_Attribute PO---K 023 023 005 - 845 +233 Media_Wearout_Indicator PO---K 100 100 000 - 164581 +234 Unknown_Attribute -O--CK 100 100 005 - 69977280 +241 Total_LBAs_Written -O--CK 100 100 000 - 18493 +242 Total_LBAs_Read -O--CK 100 100 000 - 3704 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 161 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 161 [160] occurred at disk power-on lifetime: 5310 hours (221 days + 6 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 20 00 00 00 b0 66 c0 40 08 Error: UNC at LBA = 0x00b066c0 = 11560640 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 68 00 00 00 b0 66 d0 a0 80 19:10:46.100 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 03 30 a0 80 19:10:45.500 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 30 a0 80 19:10:45.500 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 00 a0 80 19:10:45.500 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 30 a0 80 19:10:45.500 READ LOG EXT + +Error 160 [159] occurred at disk power-on lifetime: 5310 hours (221 days + 6 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 20 00 00 00 b0 66 c0 40 08 Error: UNC at LBA = 0x00b066c0 = 11560640 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 c0 00 00 00 b0 66 d0 a0 80 19:10:45.500 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 a0 80 19:10:44.400 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 19:10:44.400 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 19:10:44.400 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 19:10:43.800 FLUSH CACHE EXT + +Error 159 [158] occurred at disk power-on lifetime: 2442 hours (101 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 05 53 70 f0 40 08 Error: UNC at LBA = 0x055370f0 = 89354480 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 e8 00 00 05 53 70 f0 40 80 12:54:32.000 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 00 a0 80 12:54:31.400 READ LOG EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 80 12:54:31.400 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:31.400 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 80 12:54:31.400 SET FEATURES [Set transfer mode] + +Error 158 [157] occurred at disk power-on lifetime: 2442 hours (101 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 b8 00 00 06 11 f8 78 40 08 Error: + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 05 53 70 f0 40 16 12:54:31.300 NOP [Abort queued commands] + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:29.800 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:29.800 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:29.800 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:29.800 FLUSH CACHE EXT + +Error 157 [156] occurred at disk power-on lifetime: 2442 hours (101 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 05 53 70 f0 40 08 Error: UNC at LBA = 0x055370f0 = 89354480 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 58 00 00 05 53 70 f0 a0 80 12:54:29.800 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:29.100 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:29.100 FLUSH CACHE EXT + 2f 00 00 00 01 00 00 00 00 00 00 a0 80 12:54:29.100 READ LOG EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 80 12:54:29.100 SET FEATURES [Enable SATA feature] + +Error 156 [155] occurred at disk power-on lifetime: 2442 hours (101 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 05 53 70 f0 40 08 Error: UNC at LBA = 0x055370f0 = 89354480 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 80 00 00 05 53 70 f0 40 80 12:54:29.100 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 00 a0 80 12:54:28.400 READ LOG EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 80 12:54:28.400 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:28.400 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 80 12:54:28.400 SET FEATURES [Set transfer mode] + +Error 155 [154] occurred at disk power-on lifetime: 2442 hours (101 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 05 53 70 f0 40 08 Error: UNC at LBA = 0x055370f0 = 89354480 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 40 00 00 05 53 70 f0 a0 80 12:54:28.400 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:27.700 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:27.700 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:27.700 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:27.700 FLUSH CACHE EXT + +Error 154 [153] occurred at disk power-on lifetime: 2442 hours (101 days + 18 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 03 8e 4e 18 40 08 Error: UNC at LBA = 0x038e4e18 = 59657752 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 20 00 00 03 8e 4e 18 a0 80 12:54:13.600 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 00 a0 80 12:54:13.100 READ LOG EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 80 12:54:13.100 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 12:54:13.100 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 80 12:54:13.100 SET FEATURES [Set transfer mode] + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: ?/40 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (146) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 306 --- Lifetime Power-On Resets +0x01 0x010 4 11725 --- Power-on Hours +0x01 0x018 6 38783620321 --- Logical Sectors Written +0x01 0x020 6 802664457 --- Number of Write Commands +0x01 0x028 6 7768991036 --- Logical Sectors Read +0x01 0x030 6 179511459 --- Number of Read Commands +0x01 0x038 6 10775213238604 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 179 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 161 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 75 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KingSpec/NT-256/NT-256 2242/4D3DC150F6A5 b/SSD/KingSpec/NT-256/NT-256 2242/4D3DC150F6A5 new file mode 100644 index 000000000..5779db66d --- /dev/null +++ b/SSD/KingSpec/NT-256/NT-256 2242/4D3DC150F6A5 @@ -0,0 +1,173 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NT-256 2242 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN12574 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 24 05:38:05 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 3079 + 12 Power_Cycle_Count ------+ 100 100 000 - 29 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 196614 +173 Unknown_Attribute ------+ 200 200 000 - 4300275747 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 27 +192 Power-Off_Retract_Count ------+ 100 100 000 - 25 +194 Temperature_Celsius ------+ 038 038 000 - 38 (Min/Max 27/41) +231 Unknown_SSD_Attribute ------+ 098 098 005 - 2 +233 Media_Wearout_Indicator ------+ 100 100 000 - 1861 +234 Unknown_Attribute ------+ 100 100 005 - 431080 +241 Total_LBAs_Written ------+ 100 100 000 - 1857 +242 Total_LBAs_Read ------+ 100 100 000 - 43 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: ?/41 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (458) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 3079 --- Power-on Hours +0x01 0x018 6 3895729750 --- Logical Sectors Written +0x01 0x020 6 65721476 --- Number of Write Commands +0x01 0x028 6 90177866 --- Logical Sectors Read +0x01 0x030 6 1968981 --- Number of Read Commands +0x01 0x038 6 2811305526792 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/NT-256/NT-256 2242/7F3541540EF1 b/SSD/KingSpec/NT-256/NT-256 2242/7F3541540EF1 new file mode 100644 index 000000000..561bed3d0 --- /dev/null +++ b/SSD/KingSpec/NT-256/NT-256 2242/7F3541540EF1 @@ -0,0 +1,93 @@ +smartctl 7.3 2022-02-28 r5338 [NetBSD 10.0_STABLE i386] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NT-256 2242 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN12574 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sat Jan 18 02:41:39 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x1300 100 100 050 Old_age Offline - 0 + 9 Power_On_Hours 0x1200 100 100 000 Old_age Offline - 1219 + 12 Power_Cycle_Count 0x1200 100 100 000 Old_age Offline - 11 +167 Unknown_Attribute 0x2200 100 100 000 Old_age Offline - 0 +168 Unknown_Attribute 0x1200 100 100 000 Old_age Offline - 0 +169 Unknown_Attribute 0x1300 100 100 010 Old_age Offline - 262152 +173 Unknown_Attribute 0x1200 200 200 000 Old_age Offline - 4295294977 +175 Program_Fail_Count_Chip 0x2200 100 100 010 Old_age Offline - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x3300 100 100 000 Old_age Offline - 26 +192 Power-Off_Retract_Count 0x1200 100 100 000 Old_age Offline - 10 +194 Temperature_Celsius 0x2200 032 032 000 Old_age Offline - 32 (Min/Max 25/37) +231 Unknown_SSD_Attribute 0x2300 100 100 005 Old_age Offline - 0 +233 Media_Wearout_Indicator 0x2300 100 100 000 Old_age Offline - 55 +234 Unknown_Attribute 0x3200 100 100 005 Old_age Offline - 2404 +241 Total_LBAs_Written 0x3200 100 100 000 Old_age Offline - 34 +242 Total_LBAs_Read 0x3200 100 100 000 Old_age Offline - 5 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/KingSpec/NT-512/NT-512 2242/FD7ACB04F7AB b/SSD/KingSpec/NT-512/NT-512 2242/FD7ACB04F7AB new file mode 100644 index 000000000..756c82a0d --- /dev/null +++ b/SSD/KingSpec/NT-512/NT-512 2242/FD7ACB04F7AB @@ -0,0 +1,173 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NT-512 2242 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN14546 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 4 07:46:36 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 10391 + 12 Power_Cycle_Count -O--C- 100 100 000 - 36 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 65538 +173 Unknown_Attribute -O--C- 200 200 000 - 8600354905 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 135 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 29 +194 Temperature_Celsius -O---K 033 033 000 - 33 (Min/Max 23/41) +231 Unknown_SSD_Attribute PO---K 095 095 005 - 5 +233 Media_Wearout_Indicator PO---K 100 100 000 - 16490 +234 Unknown_Attribute -O--CK 100 100 005 - 3106330 +241 Total_LBAs_Written -O--CK 100 100 000 - 4554 +242 Total_LBAs_Read -O--CK 100 100 000 - 6984 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: ?/35 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (365) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 36 --- Lifetime Power-On Resets +0x01 0x010 4 10391 --- Power-on Hours +0x01 0x018 6 9550641920 --- Logical Sectors Written +0x01 0x020 6 356235481 --- Number of Write Commands +0x01 0x028 6 14647863916 --- Logical Sectors Read +0x01 0x030 6 59178699 --- Number of Read Commands +0x01 0x038 6 9529089677260 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/P3/P3-128/28B60E63C1B5 b/SSD/KingSpec/P3/P3-128/28B60E63C1B5 new file mode 100644 index 000000000..450a0707f --- /dev/null +++ b/SSD/KingSpec/P3/P3-128/28B60E63C1B5 @@ -0,0 +1,152 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HDFEF3.4 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Nov 24 23:44:31 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 10) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 439 + 12 Power_Cycle_Count -O--C- 100 100 000 - 6 +160 Unknown_Attribute -O--C- 100 100 000 - 0 +161 Unknown_Attribute -O--C- 100 100 000 - 68 +163 Unknown_Attribute PO---- 100 100 050 - 8 +164 Unknown_Attribute ------ 100 100 000 - 15352 +165 Unknown_Attribute ------ 100 100 000 - 11 +166 Unknown_Attribute ------ 100 100 000 - 7 +167 Unknown_Attribute ------ 100 100 000 - 9 +172 Unknown_Attribute ------ 100 100 000 - 0 +173 Unknown_Attribute ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 6 +194 Temperature_Celsius ------ 064 064 000 - 36 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 7043 +242 Total_LBAs_Read -O--C- 100 100 000 - 0 +249 Unknown_Attribute -O--C- 100 100 000 - 304 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 31233 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 5706081825473363970 8071452920708661274 Not_testing + 2 1347152983506391040 11966235879766361856 Not_testing + 3 13907117900078121220 3203427127553590 Not_testing + 4 12465963890770844672 802766649584783878 Not_testing + 5 6922318586191020545 9232379308655249888 Not_testing +16647 14635930437306814044 14635930437306879579 Read_scanning was never started +Selective self-test flags (0xd419): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 5749 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 439 --- Power-on Hours +0x01 0x018 6 461609558 --- Logical Sectors Written +0x01 0x028 6 32655 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -83 --- Current Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 82 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/P3/P3-128/638FDC587B86 b/SSD/KingSpec/P3/P3-128/638FDC587B86 new file mode 100644 index 000000000..ee39755aa --- /dev/null +++ b/SSD/KingSpec/P3/P3-128/638FDC587B86 @@ -0,0 +1,152 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HDFEF3.4 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Nov 27 17:34:22 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 10) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 131 + 12 Power_Cycle_Count -O--C- 100 100 000 - 100 +160 Unknown_Attribute -O--C- 100 100 000 - 0 +161 Unknown_Attribute -O--C- 100 100 000 - 68 +163 Unknown_Attribute PO---- 100 100 050 - 20 +164 Unknown_Attribute ------ 100 100 000 - 13250 +165 Unknown_Attribute ------ 100 100 000 - 10 +166 Unknown_Attribute ------ 100 100 000 - 7 +167 Unknown_Attribute ------ 100 100 000 - 8 +172 Unknown_Attribute ------ 100 100 000 - 0 +173 Unknown_Attribute ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 21 +194 Temperature_Celsius ------ 063 063 000 - 37 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 2549 +242 Total_LBAs_Read -O--C- 100 100 000 - 1000 +249 Unknown_Attribute -O--C- 100 100 000 - 111 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 18433 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 1297292329330160384 65442941262424192 Not_testing + 2 65443013704843283 65443013704843283 Not_testing + 3 65443013704843283 65443009409875987 Not_testing + 4 47403326423725333 36251998443784195 Not_testing + 5 17082434899442401331 2524478734139400 Not_testing +20508 9232661640947892440 9232661640947957975 Read_scanning was never started +Selective self-test flags (0x1500): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 1481 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 100 --- Lifetime Power-On Resets +0x01 0x010 4 131 --- Power-on Hours +0x01 0x018 6 167072781 --- Logical Sectors Written +0x01 0x028 6 65552629 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -20 --- Current Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 77 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/P3/P3-128/67B055384396 b/SSD/KingSpec/P3/P3-128/67B055384396 new file mode 100644 index 000000000..1d6ca6187 --- /dev/null +++ b/SSD/KingSpec/P3/P3-128/67B055384396 @@ -0,0 +1,155 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HDFED3.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Apr 12 22:34:19 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2336 + 12 Power_Cycle_Count -O--C- 100 100 000 - 30 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute -O--C- 100 100 000 - 72 +163 Unknown_Attribute PO---- 100 100 050 - 53 +164 Unknown_Attribute ------ 100 100 000 - 23578 +165 Unknown_Attribute ------ 100 100 000 - 23 +166 Unknown_Attribute ------ 100 100 000 - 7 +167 Unknown_Attribute ------ 100 100 000 - 11 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius PO---K 100 100 000 - 31 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 13319 +242 Total_LBAs_Read -O--C- 100 100 000 - 1593 +249 Unknown_Attribute -O--C- 100 100 000 - 566 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 98 (64 sectors) +No Errors Logged + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 36 (1 sectors) +Invalid Self-test Log index = 0x03f0 (reserved = 0x0e) +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 2336 --- Power-on Hours +0x01 0x018 6 872909404 --- Logical Sectors Written +0x01 0x028 6 104425781 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -80 --- Current Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 49 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/P3/P3-128/B56605A55CA1 b/SSD/KingSpec/P3/P3-128/B56605A55CA1 new file mode 100644 index 000000000..f63dcd8d3 --- /dev/null +++ b/SSD/KingSpec/P3/P3-128/B56605A55CA1 @@ -0,0 +1,102 @@ +smartctl 7.5 2025-04-30 r5714 [OpenBSD 7.8 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HDFED3.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Dec 24 21:57:12 2025 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 662 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 785 +160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +161 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 72 +163 Unknown_Attribute 0x0003 100 100 050 Pre-fail Always - 4 +164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 153370 +165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 78 +166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 52 +167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 72 +172 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 +173 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 621 +194 Temperature_Celsius 0x0023 100 100 000 Pre-fail Always - 36 +196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 102432 +242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 52743 +249 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 7675 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/KingSpec/P3/P3-128/BCFAC7E06DAD b/SSD/KingSpec/P3/P3-128/BCFAC7E06DAD new file mode 100644 index 000000000..9993d449b --- /dev/null +++ b/SSD/KingSpec/P3/P3-128/BCFAC7E06DAD @@ -0,0 +1,164 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R6327 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 18 01:15:33 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 389 + 12 Power_Cycle_Count -O--CK 100 100 000 - 41 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 276 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 0 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 31 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 32799 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 1 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 52 +242 Total_LBAs_Read -O--CK 100 100 000 - 25 +249 Unknown_Attribute -O--CK 100 100 000 - 18 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 57 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 388 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 389 --- Power-on Hours +0x01 0x018 6 109993571 --- Logical Sectors Written +0x01 0x020 6 1961471 --- Number of Write Commands +0x01 0x028 6 53918234 --- Logical Sectors Read +0x01 0x030 6 1673824 --- Number of Read Commands +0x01 0x038 6 1387153696 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 126 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/P3/P3-128/D9A44FC4941B b/SSD/KingSpec/P3/P3-128/D9A44FC4941B new file mode 100644 index 000000000..7cee58300 --- /dev/null +++ b/SSD/KingSpec/P3/P3-128/D9A44FC4941B @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-128 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: HDFED3.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Dec 30 11:00:01 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 720) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 3) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 5644 + 12 Power_Cycle_Count -O--C- 100 100 000 - 14 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute -O--C- 100 100 000 - 72 +163 Unknown_Attribute PO---- 100 100 050 - 38 +164 Unknown_Attribute ------ 100 100 000 - 509069 +165 Unknown_Attribute ------ 100 100 000 - 278 +166 Unknown_Attribute ------ 100 100 000 - 233 +167 Unknown_Attribute ------ 100 100 000 - 251 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 8 +194 Temperature_Celsius PO---K 100 100 000 - 44 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 146193 +242 Total_LBAs_Read -O--C- 100 100 000 - 296 +249 Unknown_Attribute -O--C- 100 100 000 - 21820 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 80 (64 sectors) +Invalid Error Log index = 0x7065 (reserved = 0x52) +Device Error Count: 18017 (possibly also invalid) + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 249 (1 sectors) +Invalid Self-test Log index = 0x6197 (reserved = 0x0d) +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 3) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 5644 --- Power-on Hours +0x01 0x018 6 9580935395 --- Logical Sectors Written +0x01 0x028 6 19402854 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -51 --- Current Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 90 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/P3/P3-1TB/6F5E51D284B1 b/SSD/KingSpec/P3/P3-1TB/6F5E51D284B1 new file mode 100644 index 000000000..98b09e6a0 --- /dev/null +++ b/SSD/KingSpec/P3/P3-1TB/6F5E51D284B1 @@ -0,0 +1,164 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-1TB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R840H +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jan 19 09:33:11 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 356 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 8 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 0 +166 Unknown_Attribute -O--CK 100 100 000 - 37 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 11 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 332586 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 34 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 115 +242 Total_LBAs_Read -O--CK 100 100 000 - 11 +249 Unknown_Attribute -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 115 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 356 --- Power-on Hours +0x01 0x018 6 241861432 --- Logical Sectors Written +0x01 0x020 6 2379059 --- Number of Write Commands +0x01 0x028 6 23971381 --- Logical Sectors Read +0x01 0x030 6 606988 --- Number of Read Commands +0x01 0x038 6 1278509364 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 13 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 51 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/P3/P3-1TB/7D9115338ED6 b/SSD/KingSpec/P3/P3-1TB/7D9115338ED6 new file mode 100644 index 000000000..92aa46438 --- /dev/null +++ b/SSD/KingSpec/P3/P3-1TB/7D9115338ED6 @@ -0,0 +1,185 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-1TB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H230915a +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu May 15 13:11:38 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 31 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 196614 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 4295229443 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +177 Wear_Leveling_Count -O--C- 100 100 000 - 24158 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 117 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 7 +194 Temperature_Celsius -O---K 029 029 000 - 29 (Min/Max 26/36) +196 Reallocated_Event_Count -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 4 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 3 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 +210 Unknown_Attribute -O--CK 200 200 000 - 7 +211 Unknown_Attribute -O--CK 200 200 000 - 4 +231 Unknown_SSD_Attribute PO---K 100 100 005 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 918 +242 Total_LBAs_Read -O--CK 100 100 000 - 379 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (276) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 31 --- Power-on Hours +0x01 0x018 6 1925975439 --- Logical Sectors Written +0x01 0x020 6 5948830 --- Number of Write Commands +0x01 0x028 6 795355854 --- Logical Sectors Read +0x01 0x030 6 8567074 --- Number of Read Commands +0x01 0x038 6 25881448776 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/KingSpec/P3/P3-256/512C07621848 b/SSD/KingSpec/P3/P3-256/512C07621848 new file mode 100644 index 000000000..612f7d70c --- /dev/null +++ b/SSD/KingSpec/P3/P3-256/512C07621848 @@ -0,0 +1,211 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-256 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: T170810a +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 10 18:32:51 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 66) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 4807 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4963 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--CK 200 200 000 - 77327761559 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 280 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 622 +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 18 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 280 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 151 +231 Unknown_SSD_Attribute PO---K 095 095 005 - 5 +241 Total_LBAs_Written -O--CK 100 100 000 - 22726125333 +242 Total_LBAs_Read -O--CK 100 100 000 - 23509436548 +245 Unknown_Attribute -O--CK 100 100 000 - 1149998615 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 4281 hours (178 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.000 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.000 IDENTIFY PACKET DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:00.000 NOP [Abort queued commands] + +Error 1 [0] occurred at disk power-on lifetime: 4281 hours (178 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 58 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.000 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.000 IDENTIFY PACKET DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:00.000 NOP [Abort queued commands] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 00% 3399 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (300) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KingSpec/P3/P3-2TB/DF6721FF03C7 b/SSD/KingSpec/P3/P3-2TB/DF6721FF03C7 new file mode 100644 index 000000000..d1533d87e --- /dev/null +++ b/SSD/KingSpec/P3/P3-2TB/DF6721FF03C7 @@ -0,0 +1,176 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-2TB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN12574 +User Capacity: 2,048,408,248,320 bytes [2.04 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 29 20:15:31 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct ------+ 100 100 050 - 0 + 9 Power_On_Hours ------+ 100 100 000 - 9950 + 12 Power_Cycle_Count ------+ 100 100 000 - 623 +167 Unknown_Attribute ------+ 100 100 000 - 0 +168 Unknown_Attribute ------+ 100 100 000 - 0 +169 Unknown_Attribute ------+ 100 100 010 - 196614 +173 Unknown_Attribute ------+ 200 200 000 - 17182556173 +175 Program_Fail_Count_Chip ------+ 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot ------+ 100 100 000 - 237 +192 Power-Off_Retract_Count ------+ 100 100 000 - 107 +194 Temperature_Celsius ------+ 034 034 000 - 34 (Min/Max 26/45) +231 Unknown_SSD_Attribute ------+ 100 100 005 - 0 +233 Media_Wearout_Indicator ------+ 100 100 000 - 9175 +234 Unknown_Attribute ------+ 100 100 005 - 2399376 +241 Total_LBAs_Written ------+ 100 100 000 - 4696 +242 Total_LBAs_Read ------+ 100 100 000 - 4383 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: ?/35 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (361) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 623 --- Lifetime Power-On Resets +0x01 0x010 4 9950 --- Power-on Hours +0x01 0x018 6 9850153468 --- Logical Sectors Written +0x01 0x020 6 70092635 --- Number of Write Commands +0x01 0x028 6 9193839354 --- Logical Sectors Read +0x01 0x030 6 52080618 --- Number of Read Commands +0x01 0x038 6 9171215497392 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KingSpec/P3/P3-512/526C991E9908 b/SSD/KingSpec/P3/P3-512/526C991E9908 new file mode 100644 index 000000000..fb2bcb1dd --- /dev/null +++ b/SSD/KingSpec/P3/P3-512/526C991E9908 @@ -0,0 +1,174 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: P3-512 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SN20992 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 20 00:24:03 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 20 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 135 + 12 Power_Cycle_Count -O--C- 100 100 000 - 33 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 11403328 +173 Unknown_Attribute -O--C- 200 200 000 - 65536 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 1170 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius -O---K 029 029 000 - 29 (Min/Max 26/32) +231 Unknown_SSD_Attribute PO---K 100 100 005 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Unknown_Attribute -O--CK 100 100 000 - 10 +241 Total_LBAs_Written -O--CK 100 100 000 - 0 +242 Total_LBAs_Read -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: ?/29 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (117) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 135 --- Power-on Hours +0x01 0x018 6 182197 --- Logical Sectors Written +0x01 0x020 6 3156 --- Number of Write Commands +0x01 0x028 6 190350 --- Logical Sectors Read +0x01 0x030 6 5521 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingchuxing/SSD/SSD 128GB/FCE7607F41F9 b/SSD/Kingchuxing/SSD/SSD 128GB/FCE7607F41F9 new file mode 100644 index 000000000..c33342ef3 --- /dev/null +++ b/SSD/Kingchuxing/SSD/SSD 128GB/FCE7607F41F9 @@ -0,0 +1,165 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Kingchuxing 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: ZD0R3G03 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 14 03:58:50 2025 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15 + 12 Power_Cycle_Count -O--CK 100 100 000 - 82 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 188 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 0 +166 Unknown_Attribute -O--CK 100 100 000 - 10 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 38 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 193165 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 40 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 2 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 57 +241 Total_LBAs_Written -O--CK 100 100 000 - 97 +242 Total_LBAs_Read -O--CK 100 100 000 - 59 +249 Unknown_Attribute -O--CK 100 100 000 - 56 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 109 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 82 --- Lifetime Power-On Resets +0x01 0x010 4 15 --- Power-on Hours +0x01 0x018 6 205273483 --- Logical Sectors Written +0x01 0x020 6 1747098 --- Number of Write Commands +0x01 0x028 6 124993398 --- Logical Sectors Read +0x01 0x030 6 895609 --- Number of Read Commands +0x01 0x038 6 56871642 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 106 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingchuxing/SSD/SSD 1TB/F7794230CE93 b/SSD/Kingchuxing/SSD/SSD 1TB/F7794230CE93 new file mode 100644 index 000000000..6866457ef --- /dev/null +++ b/SSD/Kingchuxing/SSD/SSD 1TB/F7794230CE93 @@ -0,0 +1,163 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Kingchuxing 1TB +Serial Number: -- +Firmware Version: V0823A0 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 8 14:26:10 2025 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4457 + 12 Power_Cycle_Count -O--CK 100 100 050 - 70 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 44 +164 Unknown_Attribute -O--CK 100 100 050 - 0 +165 Unknown_Attribute -O--CK 100 100 050 - 0 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 43 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 12612 +242 Total_LBAs_Read ----CK 100 100 050 - 17570 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 80% 4450 - +# 2 Extended offline Aborted by host 80% 4450 - +# 3 Extended offline Aborted by host 80% 4450 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 22/40 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 70 --- Lifetime Power-On Resets +0x01 0x010 4 4457 --- Power-on Hours +0x01 0x018 6 826562213 --- Logical Sectors Written +0x01 0x020 6 7980191 --- Number of Write Commands +0x01 0x028 6 1151470135 --- Logical Sectors Read +0x01 0x030 6 6765719 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 33 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingmax/SSD/SSD 120GB/F6847640E396 b/SSD/Kingmax/SSD/SSD 120GB/F6847640E396 new file mode 100644 index 000000000..b3a5d1a49 --- /dev/null +++ b/SSD/Kingmax/SSD/SSD 120GB/F6847640E396 @@ -0,0 +1,125 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Kingmax SSD 120GB +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.15.0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Apr 7 16:18:05 2025 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 25692 + 12 Power_Cycle_Count PO--CK 100 100 010 - 104 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 175190 +165 Unknown_Attribute PO--CK 100 100 010 - 424 +166 Unknown_Attribute PO--CK 100 100 010 - 218 +167 Unknown_Attribute PO--CK 100 100 010 - 398 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 43 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 16870 +242 Total_LBAs_Read PO--CK 100 100 010 - 381 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +249 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Kingston/OCP0/OCP0S3128B-A0/108020C725E3 b/SSD/Kingston/OCP0/OCP0S3128B-A0/108020C725E3 new file mode 100644 index 000000000..f291d69af --- /dev/null +++ b/SSD/Kingston/OCP0/OCP0S3128B-A0/108020C725E3 @@ -0,0 +1,149 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON OCP0S3128B-A0 +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK62A3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Apr 4 15:08:18 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 1732 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 102 (Average 48) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 22 +194 Temperature_Celsius -O---K 030 038 000 - 30 (Min/Max 20/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 098 098 000 - 98 +233 Flash_Writes_GiB -O--CK 100 100 000 - 5051 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1604 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 76 +244 Average_Erase_Count ------ 100 100 000 - 48 +245 Max_Erase_Count ------ 100 100 000 - 102 +246 Total_Erase_Count ------ 100 100 000 - 356504 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 1732 --- Power-on Hours +0x01 0x018 6 3365512882 --- Logical Sectors Written +0x01 0x028 6 160716222 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 96 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/OMSP0/OMSP0S3256B-00/E9813C7028E5 b/SSD/Kingston/OMSP0/OMSP0S3256B-00/E9813C7028E5 new file mode 100644 index 000000000..bde064b68 --- /dev/null +++ b/SSD/Kingston/OMSP0/OMSP0S3256B-00/E9813C7028E5 @@ -0,0 +1,148 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON OMSP0S3256B-00 +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK62A3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 27 22:28:27 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 13026 + 12 Power_Cycle_Count -O--CK 100 100 000 - 34 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 71 (Average 42) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 29 +194 Temperature_Celsius -O---K 036 036 000 - 36 (Min/Max 22/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 098 098 000 - 98 +233 Flash_Writes_GiB -O--CK 100 100 000 - 4806 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 4274 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 5 +244 Average_Erase_Count ------ 100 100 000 - 42 +245 Max_Erase_Count ------ 100 100 000 - 71 +246 Total_Erase_Count ------ 100 100 000 - 617872 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 13026 --- Power-on Hours +0x01 0x018 6 8965239586 --- Logical Sectors Written +0x01 0x028 6 10812931 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 116 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/RBU-SC152/RBU-SC152DS37480GH/760A3049FB4D b/SSD/Kingston/RBU-SC152/RBU-SC152DS37480GH/760A3049FB4D new file mode 100644 index 000000000..93ec17993 --- /dev/null +++ b/SSD/Kingston/RBU-SC152/RBU-SC152DS37480GH/760A3049FB4D @@ -0,0 +1,187 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBU-SC152DS37480GH +Serial Number: -- +Firmware Version: SAFM12.G +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 4 14:07:38 2025 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 2 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 20540 + 12 Power_Cycle_Count -O--C- 100 100 000 - 845 +168 Unknown_Attribute -O--C- 100 100 000 - 4156 +170 Unknown_Attribute PO---- 097 097 010 - 8589935082 +173 Unknown_Attribute -O--C- 100 100 000 - 1376312 +175 Program_Fail_Count_Chip PO--C- 100 100 050 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 439 +194 Temperature_Celsius PO---K 073 034 030 - 27 (Min/Max 10/66) +196 Reallocated_Event_Count -O---- 100 100 010 - 2 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 4122 +218 Unknown_Attribute PO-R-- 100 100 050 - 4122 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 +233 Media_Wearout_Indicator PO-R-- 100 100 000 - 10693 +240 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 17154 +242 Total_LBAs_Read -O--C- 100 100 000 - 32323 +244 Unknown_Attribute -O---- 100 100 000 - 21 +245 Unknown_Attribute -O---- 100 100 000 - 56 +246 Unknown_Attribute -O--C- 100 100 000 - 1976064 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12971 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 845 --- Lifetime Power-On Resets +0x01 0x010 4 20540 --- Power-on Hours +0x01 0x018 6 35976635083 --- Logical Sectors Written +0x01 0x020 6 909051756 --- Number of Write Commands +0x01 0x028 6 67787267240 --- Logical Sectors Read +0x01 0x030 6 1002490443 --- Number of Read Commands +0x01 0x038 6 73944865241 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 388 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6047 --- Number of Hardware Resets +0x06 0x018 4 4092 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/RBU-SC400/RBU-SC400S37128G/E53CB9BDAD36 b/SSD/Kingston/RBU-SC400/RBU-SC400S37128G/E53CB9BDAD36 new file mode 100644 index 000000000..eaa53988b --- /dev/null +++ b/SSD/Kingston/RBU-SC400/RBU-SC400S37128G/E53CB9BDAD36 @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBU-SC400S37128G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 505ABBF0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 17 19:42:36 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 + 9 Power_On_Hours -O--CK 051 051 000 - 43551 (212 160 0) + 12 Power_Cycle_Count -O--CK 097 097 000 - 3536 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +174 Unknown_Attribute ----CK 000 000 000 - 224 +177 Wear_Leveling_Count ------ 000 000 000 - 12 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 Unknown_SSD_Attribute ------ 034 072 000 - 42954391586 +194 Temperature_Celsius -O---K 034 072 000 - 34 (Min/Max 10/72) +195 Hardware_ECC_Recovered --SRC- 100 100 000 - 0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unknown_SSD_Attribute --SRC- 100 100 000 - 0 +204 Soft_ECC_Correction --SRC- 100 100 000 - 0 +230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +231 Unknown_SSD_Attribute PO--C- 083 083 010 - 0 +233 Media_Wearout_Indicator ------ 000 000 000 - 87392 +234 Unknown_Attribute -O--CK 000 000 000 - 30942 +241 Total_LBAs_Written -O--CK 000 000 000 - 30942 +242 Total_LBAs_Read -O--CK 000 000 000 - 21091 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 33/34 Celsius +Lifetime Min/Max Temperature: 10/72 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: -43/115 Celsius +Min/Max Temperature Limit: -80/-94 Celsius +Temperature History Size (Index): 49459 (184) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Kingston/RBUSC180/RBUSC180DS37256GJ/714EDA87EAA3 b/SSD/Kingston/RBUSC180/RBUSC180DS37256GJ/714EDA87EAA3 new file mode 100644 index 000000000..0f4369332 --- /dev/null +++ b/SSD/Kingston/RBUSC180/RBUSC180DS37256GJ/714EDA87EAA3 @@ -0,0 +1,71 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.7 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBUSC180DS37256GJ +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61E1 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 17 13:44:58 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4381 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 3322 +167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +173 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 4784245 +181 Program_Fail_Cnt_Total 0x0012 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 268 +194 Temperature_Celsius 0x0023 071 059 000 Pre-fail Always - 29 (Min/Max 13/41) +196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0 +218 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +231 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 94 +233 Media_Wearout_Indicator 0x0013 100 100 000 Pre-fail Always - 14695 +241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 13936 +242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 16360 +244 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 73 +245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 117 +246 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1607504 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/Kingston/RBUSC180/RBUSC180S3764GJ/BE4EC3D8D655 b/SSD/Kingston/RBUSC180/RBUSC180S3764GJ/BE4EC3D8D655 new file mode 100644 index 000000000..6dfdcbbc6 --- /dev/null +++ b/SSD/Kingston/RBUSC180/RBUSC180S3764GJ/BE4EC3D8D655 @@ -0,0 +1,170 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBUSC180S3764GJ +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61D1 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 19 05:40:53 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 11578 + 12 Power_Cycle_Count -O--C- 100 100 000 - 938 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute ------ 100 100 000 - 19267903 +181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 174 +194 Temperature_Celsius PO---K 064 041 000 - 36 (Min/Max 18/59) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +218 Unknown_Attribute ------ 100 100 000 - 1 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 77 +233 Media_Wearout_Indicator PO--C- 100 100 000 - 9230 +241 Total_LBAs_Written -O--C- 100 100 000 - 4301 +242 Total_LBAs_Read -O--C- 100 100 000 - 2659 +243 Unknown_Attribute -O--C- 100 100 000 - 0 +244 Unknown_Attribute ------ 100 100 000 - 294 +245 Unknown_Attribute ------ 100 100 000 - 319 +246 Unknown_Attribute ------ 100 100 000 - 1637880 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 01 00 00 00 01 7b ac 00 40 00 Error: ICRC, ABRT 256 sectors at LBA = 0x017bac00 = 24882176 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 03 03 01 00 00 00 01 7b ac 00 40 00 00:00:00.000 WRITE DMA EXT + 35 03 03 01 00 00 00 01 7b ab 00 40 00 00:00:00.000 WRITE DMA EXT + 35 03 03 01 00 00 00 01 7b aa 00 40 00 00:00:00.000 WRITE DMA EXT + 35 03 03 01 00 00 00 01 7b a9 00 40 00 00:00:00.000 WRITE DMA EXT + 35 03 03 01 00 00 00 01 7b a8 00 40 00 00:00:00.000 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 938 --- Lifetime Power-On Resets +0x01 0x010 4 11578 --- Power-on Hours +0x01 0x018 6 9020412884 --- Logical Sectors Written +0x01 0x028 6 5578401894 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 22 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 163 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/RBUSNS8180/RBUSNS8180DS3128GH/ED0CE4955C06 b/SSD/Kingston/RBUSNS8180/RBUSNS8180DS3128GH/ED0CE4955C06 new file mode 100644 index 000000000..de8db2bf9 --- /dev/null +++ b/SSD/Kingston/RBUSNS8180/RBUSNS8180DS3128GH/ED0CE4955C06 @@ -0,0 +1,189 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBUSNS8180DS3128GH +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFK10D7 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 14 22:37:39 2025 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 13837 + 12 Power_Cycle_Count -O--C- 100 100 000 - 6050 +148 Unknown_Attribute ------ 255 255 000 - 0 +149 Unknown_Attribute ------ 255 255 000 - 281474976710655 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute ------ 100 100 000 - 6 +170 Unknown_Attribute PO--C- 100 100 010 - 7 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute ------ 100 100 000 - 24838554 +181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 255 255 000 - 281474976710655 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 1252 +194 Temperature_Celsius PO---K 062 021 000 - 38 (Min/Max 14/79) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 Unknown_Attribute ------ 100 100 000 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 62 +233 Media_Wearout_Indicator PO--C- 100 100 000 - 32115 +241 Total_LBAs_Written -O--C- 100 100 000 - 28692 +242 Total_LBAs_Read -O--C- 100 100 000 - 31177 +244 Unknown_Attribute ------ 100 100 000 - 379 +245 Unknown_Attribute ------ 100 100 000 - 410 +246 Unknown_Attribute ------ 100 100 000 - 8386384 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12046 - +# 2 Short offline Completed without error 00% 12036 - +# 3 Short offline Completed without error 00% 12030 - +# 4 Short offline Completed without error 00% 12029 - +# 5 Short offline Completed without error 00% 12023 - +# 6 Short offline Completed without error 00% 12011 - +# 7 Short offline Completed without error 00% 12008 - +# 8 Short offline Completed without error 00% 12000 - +# 9 Short offline Completed without error 00% 11999 - +#10 Short offline Completed without error 00% 11989 - +#11 Short offline Completed without error 00% 11985 - +#12 Short offline Completed without error 00% 11984 - +#13 Short offline Completed without error 00% 11981 - +#14 Short offline Completed without error 00% 11979 - +#15 Short offline Completed without error 00% 11975 - +#16 Short offline Completed without error 00% 11971 - +#17 Short offline Completed without error 00% 11960 - +#18 Short offline Completed without error 00% 11956 - +#19 Short offline Completed without error 00% 11955 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6050 --- Lifetime Power-On Resets +0x01 0x010 4 13837 --- Power-on Hours +0x01 0x018 6 60172203835 --- Logical Sectors Written +0x01 0x028 6 65384658484 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x020 1 79 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 37 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400M8120G/52E5EFB93E90 b/SSD/Kingston/SA400/SA400M8120G/52E5EFB93E90 new file mode 100644 index 000000000..f8071b7dc --- /dev/null +++ b/SSD/Kingston/SA400/SA400M8120G/52E5EFB93E90 @@ -0,0 +1,144 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400M8120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 6 15:06:15 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 23611 + 12 Power_Cycle_Count -O--CK 100 100 000 - 116 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 3 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 235 (Average 184) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 89 +194 Temperature_Celsius -O---K 060 058 000 - 40 (Min/Max 24/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 019 019 000 - 81 +233 Flash_Writes_GiB -O--CK 100 100 000 - 10994 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 37276 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 206 +244 Average_Erase_Count ------ 100 100 000 - 184 +245 Max_Erase_Count ------ 100 100 000 - 235 +246 Total_Erase_Count ------ 100 100 000 - 2045136 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 116 --- Lifetime Power-On Resets +0x01 0x010 4 23611 --- Power-on Hours +0x01 0x018 6 78173444147 --- Logical Sectors Written +0x01 0x028 6 433076724 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400M8120G/97A23A7884FB b/SSD/Kingston/SA400/SA400M8120G/97A23A7884FB new file mode 100644 index 000000000..680fe9eaf --- /dev/null +++ b/SSD/Kingston/SA400/SA400M8120G/97A23A7884FB @@ -0,0 +1,144 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400M8120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Mar 26 07:56:55 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2700 + 12 Power_Cycle_Count -O--CK 100 100 000 - 701 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 4 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/9 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 88 (Average 58) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 69 +194 Temperature_Celsius -O---K 059 043 000 - 41 (Min/Max 21/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 006 006 000 - 94 +233 Flash_Writes_GiB -O--CK 100 100 000 - 4750 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 4177 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 2933 +244 Average_Erase_Count ------ 100 100 000 - 58 +245 Max_Erase_Count ------ 100 100 000 - 88 +246 Total_Erase_Count ------ 100 100 000 - 649480 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 701 --- Lifetime Power-On Resets +0x01 0x010 4 2700 --- Power-on Hours +0x01 0x018 6 8760572032 --- Logical Sectors Written +0x01 0x028 6 6151803676 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400M8120G/DC84E92E63DD b/SSD/Kingston/SA400/SA400M8120G/DC84E92E63DD new file mode 100644 index 000000000..1ae0191ae --- /dev/null +++ b/SSD/Kingston/SA400/SA400M8120G/DC84E92E63DD @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400M8120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK62B3 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 17 21:59:48 2025 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 64 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 4 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/7 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 1 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 23 +194 Temperature_Celsius -O---K 041 044 000 - 41 (Min/Max 21/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 20 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 49 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 3 +244 Average_Erase_Count ------ 100 100 000 - 0 +245 Max_Erase_Count ------ 100 100 000 - 1 +246 Total_Erase_Count ------ 100 100 000 - 1880 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 43 --- Lifetime Power-On Resets +0x01 0x010 4 64 --- Power-on Hours +0x01 0x018 6 103576382 --- Logical Sectors Written +0x01 0x028 6 8142617 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 83 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 80 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400M8240G/0AD1A191B73E b/SSD/Kingston/SA400/SA400M8240G/0AD1A191B73E new file mode 100644 index 000000000..dc08291c8 --- /dev/null +++ b/SSD/Kingston/SA400/SA400M8240G/0AD1A191B73E @@ -0,0 +1,155 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400M8240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK62B3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Dec 8 03:38:25 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 26360 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9032 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 6 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/9 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 1279 (Average 88) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 9020 +194 Temperature_Celsius -O---K 035 059 000 - 35 (Min/Max 15/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 094 094 000 - 94 +233 Flash_Writes_GiB -O--CK 100 100 000 - 7219 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 5946 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 172298 +244 Average_Erase_Count ------ 100 100 000 - 88 +245 Max_Erase_Count ------ 100 100 000 - 1279 +246 Total_Erase_Count ------ 100 100 000 - 1287632 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9032 --- Lifetime Power-On Resets +0x01 0x010 4 26360 --- Power-on Hours +0x01 0x018 6 12471491638 --- Logical Sectors Written +0x01 0x028 6 361335409899 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 816 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400M8240G/2A00C8E0194F b/SSD/Kingston/SA400/SA400M8240G/2A00C8E0194F new file mode 100644 index 000000000..764d0cb39 --- /dev/null +++ b/SSD/Kingston/SA400/SA400M8240G/2A00C8E0194F @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400M8240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK62B3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 7 12:39:57 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24495 + 12 Power_Cycle_Count -O--CK 100 100 000 - 36 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 9 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/13 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 264 (Average 221) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 28 +194 Temperature_Celsius -O---K 041 041 000 - 41 (Min/Max 22/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 085 085 000 - 85 +233 Flash_Writes_GiB -O--CK 100 100 000 - 44222 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 19913 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 5871 +244 Average_Erase_Count ------ 100 100 000 - 221 +245 Max_Erase_Count ------ 100 100 000 - 264 +246 Total_Erase_Count ------ 100 100 000 - 3180240 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 36 --- Lifetime Power-On Resets +0x01 0x010 4 24495 --- Power-on Hours +0x01 0x018 6 41762269147 --- Logical Sectors Written +0x01 0x028 6 12314146995 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 402 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 80 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37-960G/CD9A9F68B154 b/SSD/Kingston/SA400/SA400S37-960G/CD9A9F68B154 new file mode 100644 index 000000000..4b7a22a08 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37-960G/CD9A9F68B154 @@ -0,0 +1,163 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Kingston SA400S37/960G +Serial Number: -- +Firmware Version: W0220A0 +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.5/5706 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 27 12:36:40 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 5825 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1854 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 56 +164 Unknown_Attribute -O--CK 100 100 050 - 162330 +165 Unknown_Attribute -O--CK 100 100 050 - 275 +166 Unknown_Attribute -O--CK 100 100 050 - 30 +167 Unknown_Attribute -O--CK 100 100 050 - 106 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 155 +194 Temperature_Celsius -O---K 100 100 050 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1002189 +242 Total_LBAs_Read ----CK 100 100 050 - 5472081 +245 Unknown_Attribute -O--CK 100 100 050 - 942004 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1643 - +# 2 Short offline Completed without error 00% 1080 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 23/30 Celsius +Specified Max Operating Temperature: 100 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1854 --- Lifetime Power-On Resets +0x01 0x010 4 5825 --- Power-on Hours +0x01 0x018 6 1254993349 --- Logical Sectors Written +0x01 0x020 6 755912290 --- Number of Write Commands +0x01 0x028 6 2136054208 --- Logical Sectors Read +0x01 0x030 6 1078677182 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/129303F84A85 b/SSD/Kingston/SA400/SA400S37120G/129303F84A85 new file mode 100644 index 000000000..03505ec17 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/129303F84A85 @@ -0,0 +1,156 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK62C3 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Mar 31 22:23:04 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13840 + 12 Power_Cycle_Count -O--CK 100 100 000 - 38 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 30 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/44 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 67 (Average 37) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 32 +194 Temperature_Celsius -O---K 026 040 000 - 26 (Min/Max 19/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 097 097 000 - 97 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1986 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1786 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 606 +244 Average_Erase_Count ------ 100 100 000 - 37 +245 Max_Erase_Count ------ 100 100 000 - 67 +246 Total_Erase_Count ------ 100 100 000 - 260008 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x010 4 13840 --- Power-on Hours +0x01 0x018 6 3746056319 --- Logical Sectors Written +0x01 0x028 6 1271731525 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 94 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/198BC1E4B053 b/SSD/Kingston/SA400/SA400S37120G/198BC1E4B053 new file mode 100644 index 000000000..ab4adc709 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/198BC1E4B053 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090005 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 16 23:20:08 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5889 + 12 Power_Cycle_Count -O--CK 100 100 000 - 47 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 163 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/66 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 31 +194 Temperature_Celsius -O---K 028 032 000 - 28 (Min/Max 14/32) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1222 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 715 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 290 +244 Average_Erase_Count ------ 100 100 000 - 6 +245 Max_Erase_Count ------ 100 100 000 - 11 +246 Total_Erase_Count ------ 100 100 000 - 2703 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 27 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37120G/260C7DB24D8D b/SSD/Kingston/SA400/SA400S37120G/260C7DB24D8D new file mode 100644 index 000000000..a509a1251 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/260C7DB24D8D @@ -0,0 +1,157 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1H5 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Feb 10 10:10:42 2025 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15018 + 12 Power_Cycle_Count -O--CK 100 100 000 - 252 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 40 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/27 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 90 (Average 80) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 56 +194 Temperature_Celsius -O---K 024 048 000 - 24 (Min/Max -5/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 092 092 000 - 92 +233 Flash_Writes_GiB -O--CK 100 100 000 - 4623 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 3586 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 2813 +244 Average_Erase_Count ------ 100 100 000 - 80 +245 Max_Erase_Count ------ 100 100 000 - 90 +246 Total_Erase_Count ------ 100 100 000 - 298576 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 252 --- Lifetime Power-On Resets +0x01 0x010 4 15018 --- Power-on Hours +0x01 0x018 6 7520449829 --- Logical Sectors Written +0x01 0x028 6 5899720258 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 -5 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/3E1523C19B52 b/SSD/Kingston/SA400/SA400S37120G/3E1523C19B52 new file mode 100644 index 000000000..243059a75 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/3E1523C19B52 @@ -0,0 +1,127 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Firmware Version: 03070009 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 20 18:32:51 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 28994 + 12 Power_Cycle_Count -O--CK 100 100 000 - 161 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 63 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/75 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 117 +194 Temperature_Celsius -O---K 037 041 000 - 37 (Min/Max 32/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 074 074 000 - 26 +233 Flash_Writes_GiB -O--CK 100 100 000 - 28783 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 16775 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 12777 +244 Average_Erase_Count ------ 100 100 000 - 194 +245 Max_Erase_Count ------ 100 100 000 - 243 +246 Total_Erase_Count ------ 100 100 000 - 260046 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 31 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37120G/419BAB72E5E6 b/SSD/Kingston/SA400/SA400S37120G/419BAB72E5E6 new file mode 100644 index 000000000..d4489e0c0 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/419BAB72E5E6 @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 29 17:49:05 2025 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6446 + 12 Power_Cycle_Count -O--CK 100 100 000 - 390 +148 Unknown_Attribute ------ 255 255 000 - 0 +149 Unknown_Attribute ------ 255 255 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 16 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/11 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 122 (Average 82) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 255 255 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 241 +194 Temperature_Celsius -O---K 077 046 000 - 23 (Min/Max 12/54) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count ------ 100 100 000 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 91 +233 Flash_Writes_GiB PO--C- 100 100 000 - 8477 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 2868 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 1690 +244 Average_Erase_Count ------ 100 100 000 - 82 +245 Max_Erase_Count ------ 100 100 000 - 122 +246 Total_Erase_Count ------ 100 100 000 - 320576 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 390 --- Lifetime Power-On Resets +0x01 0x010 4 6446 --- Power-on Hours +0x01 0x018 6 6015346739 --- Logical Sectors Written +0x01 0x028 6 3545370084 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/44E4F99E8A71 b/SSD/Kingston/SA400/SA400S37120G/44E4F99E8A71 new file mode 100644 index 000000000..cca810909 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/44E4F99E8A71 @@ -0,0 +1,171 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 17 22:20:07 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 39119 + 12 Power_Cycle_Count -O--CK 100 100 000 - 576 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 14 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/10 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 134 (Average 97) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 275 +194 Temperature_Celsius -O---K 067 046 000 - 33 (Min/Max 14/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 8 +231 SSD_Life_Left ------ 010 010 000 - 90 +233 Flash_Writes_GiB -O--CK 100 100 000 - 6521 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 4320 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 3348 +244 Average_Erase_Count ------ 100 100 000 - 97 +245 Max_Erase_Count ------ 100 100 000 - 134 +246 Total_Erase_Count ------ 100 100 000 - 374528 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39119 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 576 --- Lifetime Power-On Resets +0x01 0x010 4 39119 --- Power-on Hours +0x01 0x018 6 9060203670 --- Logical Sectors Written +0x01 0x028 6 7022451861 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 8 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/625DFD45FE14 b/SSD/Kingston/SA400/SA400S37120G/625DFD45FE14 new file mode 100644 index 000000000..87e31f6a3 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/625DFD45FE14 @@ -0,0 +1,191 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK71E0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 4 08:26:42 2025 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 40207 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1454 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 7 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 509 (Average 472) +181 Program_Fail_Count -O--CK 100 100 000 - 1 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 75 +194 Temperature_Celsius -O---K 077 059 000 - 23 (Min/Max 11/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 048 048 000 - 52 +233 Flash_Writes_GiB -O--CK 100 100 000 - 41160 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 26603 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 22288 +244 Average_Erase_Count ------ 100 100 000 - 472 +245 Max_Erase_Count ------ 100 100 000 - 509 +246 Total_Erase_Count ------ 100 100 000 - 2777940 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 40201 - +# 2 Short offline Completed without error 00% 40178 - +# 3 Short offline Completed without error 00% 40154 - +# 4 Extended offline Completed without error 00% 40131 - +# 5 Short offline Completed without error 00% 40130 - +# 6 Short offline Completed without error 00% 40106 - +# 7 Short offline Completed without error 00% 40082 - +# 8 Short offline Completed without error 00% 40058 - +# 9 Short offline Completed without error 00% 40034 - +#10 Short offline Completed without error 00% 40010 - +#11 Short offline Completed without error 00% 39986 - +#12 Extended offline Completed without error 00% 39963 - +#13 Short offline Completed without error 00% 39962 - +#14 Short offline Completed without error 00% 39938 - +#15 Short offline Completed without error 00% 39914 - +#16 Short offline Completed without error 00% 39890 - +#17 Short offline Completed without error 00% 39866 - +#18 Short offline Completed without error 00% 39842 - +#19 Short offline Completed without error 00% 39818 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1454 --- Lifetime Power-On Resets +0x01 0x010 4 40207 --- Power-on Hours +0x01 0x018 6 55790768515 --- Logical Sectors Written +0x01 0x028 6 46742938764 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 47 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/62907D8A1F3A b/SSD/Kingston/SA400/SA400S37120G/62907D8A1F3A new file mode 100644 index 000000000..490e6d7dc --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/62907D8A1F3A @@ -0,0 +1,171 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK71E0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jan 23 04:20:19 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 846 + 12 Power_Cycle_Count -O--CK 100 100 000 - 290 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 6 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/7 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 98 (Average 40) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 47 +194 Temperature_Celsius -O---K 074 058 000 - 26 (Min/Max 20/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 004 004 000 - 96 +233 Flash_Writes_GiB -O--CK 100 100 000 - 4819 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 4555 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1550 +244 Average_Erase_Count ------ 100 100 000 - 40 +245 Max_Erase_Count ------ 100 100 000 - 98 +246 Total_Erase_Count ------ 100 100 000 - 241032 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 290 --- Lifetime Power-On Resets +0x01 0x010 4 846 --- Power-on Hours +0x01 0x018 6 9554406969 --- Logical Sectors Written +0x01 0x028 6 3252166396 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/6449DE448100 b/SSD/Kingston/SA400/SA400S37120G/6449DE448100 new file mode 100644 index 000000000..fd384e8f9 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/6449DE448100 @@ -0,0 +1,171 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 10 13:24:08 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46130 + 12 Power_Cycle_Count -O--CK 100 100 000 - 88 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 14 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/10 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 681 (Average 619) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 72 +194 Temperature_Celsius -O---K 078 033 000 - 22 (Min/Max 17/33) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 038 038 000 - 38 +233 Flash_Writes_GiB -O--CK 100 100 000 - 67607 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 59023 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 393 +244 Average_Erase_Count ------ 100 100 000 - 619 +245 Max_Erase_Count ------ 100 100 000 - 681 +246 Total_Erase_Count ------ 100 100 000 - 2379616 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 88 --- Lifetime Power-On Resets +0x01 0x010 4 46130 --- Power-on Hours +0x01 0x018 6 123782054869 --- Logical Sectors Written +0x01 0x028 6 825704763 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 61 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 95 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 96 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/68F41B05B045 b/SSD/Kingston/SA400/SA400S37120G/68F41B05B045 new file mode 100644 index 000000000..d3a9a9339 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/68F41B05B045 @@ -0,0 +1,189 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK71E0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Mar 11 09:30:27 2025 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17615 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5320 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 11 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/13 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 143 (Average 137) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 791 +194 Temperature_Celsius -O---K 072 055 000 - 28 (Min/Max 10/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 014 014 000 - 86 +233 Flash_Writes_GiB -O--CK 100 100 000 - 15415 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 18138 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 7812 +244 Average_Erase_Count ------ 100 100 000 - 137 +245 Max_Erase_Count ------ 100 100 000 - 143 +246 Total_Erase_Count ------ 100 100 000 - 798396 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 00% 17572 - +# 2 Short offline Completed without error 00% 17327 - +# 3 Short offline Completed without error 00% 17327 - +# 4 Short offline Completed without error 00% 17114 - +# 5 Short offline Completed without error 00% 15050 - +# 6 Short offline Completed without error 00% 11144 - +# 7 Short offline Completed without error 00% 9350 - +# 8 Short offline Completed without error 00% 9339 - +# 9 Short offline Completed without error 00% 9329 - +#10 Short offline Completed without error 00% 9318 - +#11 Short offline Completed without error 00% 9317 - +#12 Short offline Completed without error 00% 9288 - +#13 Short offline Completed without error 00% 9264 - +#14 Short offline Completed without error 00% 9250 - +#15 Short offline Completed without error 00% 9236 - +#16 Short offline Completed without error 00% 9030 - +#17 Extended offline Interrupted (host reset) 00% 8904 - +#18 Short offline Completed without error 00% 8867 - +#19 Short offline Completed without error 00% 8861 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5320 --- Lifetime Power-On Resets +0x01 0x010 4 17615 --- Power-on Hours +0x01 0x018 6 38038972741 --- Logical Sectors Written +0x01 0x028 6 16382956778 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 10 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/6C5551EE3F13 b/SSD/Kingston/SA400/SA400S37120G/6C5551EE3F13 new file mode 100644 index 000000000..409c577ff --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/6C5551EE3F13 @@ -0,0 +1,159 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jan 14 23:23:29 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9767 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3310 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 11 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 241 (Average 184) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 129 +194 Temperature_Celsius -O---K 062 052 000 - 38 (Min/Max 19/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 019 019 000 - 81 +233 Flash_Writes_GiB -O--CK 100 100 000 - 20585 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 14055 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 7953 +244 Average_Erase_Count ------ 100 100 000 - 184 +245 Max_Erase_Count ------ 100 100 000 - 241 +246 Total_Erase_Count ------ 100 100 000 - 713704 +247 Unknown_Attribute ------ 100 100 000 - 713704 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3310 --- Lifetime Power-On Resets +0x01 0x010 4 9767 --- Power-on Hours +0x01 0x018 6 29476404083 --- Logical Sectors Written +0x01 0x028 6 16679789340 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/81BC918FB77A b/SSD/Kingston/SA400/SA400S37120G/81BC918FB77A new file mode 100644 index 000000000..b424c3cdd --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/81BC918FB77A @@ -0,0 +1,126 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Firmware Version: 03070009 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 5 22:52:50 2025 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24725 + 12 Power_Cycle_Count -O--CK 100 100 000 - 141 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 38 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/46 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 100 +194 Temperature_Celsius -O---K 024 027 000 - 24 (Min/Max 22/27) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 0 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1725 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 353 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 48 +244 Average_Erase_Count ------ 100 100 000 - 3 +245 Max_Erase_Count ------ 100 100 000 - 6 +246 Total_Erase_Count ------ 100 100 000 - 5317 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 43 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37120G/85D6981C7631 b/SSD/Kingston/SA400/SA400S37120G/85D6981C7631 new file mode 100644 index 000000000..0abf427fe --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/85D6981C7631 @@ -0,0 +1,172 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Mar 4 21:17:02 2025 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 47419 + 12 Power_Cycle_Count -O--CK 100 100 000 - 129 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 13 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/9 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 632 (Average 568) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius -O---K 080 065 000 - 20 (Min/Max 16/35) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 057 057 000 - 43 +233 Flash_Writes_GiB -O--CK 100 100 000 - 66666 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 22620 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 189 +244 Average_Erase_Count ------ 100 100 000 - 568 +245 Max_Erase_Count ------ 100 100 000 - 632 +246 Total_Erase_Count ------ 100 100 000 - 2186016 +246 Total_Erase_Count ------ 100 100 000 - 2186016 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 129 --- Lifetime Power-On Resets +0x01 0x010 4 47419 --- Power-on Hours +0x01 0x018 6 47438664437 --- Logical Sectors Written +0x01 0x028 6 398140050 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 56 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 39 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 40 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/8AF73FAF90A0 b/SSD/Kingston/SA400/SA400S37120G/8AF73FAF90A0 new file mode 100644 index 000000000..6cf3e2649 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/8AF73FAF90A0 @@ -0,0 +1,171 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 4 14:32:40 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 54640 + 12 Power_Cycle_Count -O--CK 100 100 000 - 49 +148 Unknown_Attribute ------ 255 255 000 - 0 +149 Unknown_Attribute ------ 255 255 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 14 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/10 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 1439 (Average 1382) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 255 255 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 42 +194 Temperature_Celsius -O---K 073 059 000 - 27 (Min/Max 21/41) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count ------ 100 100 000 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 0 +233 Flash_Writes_GiB PO--C- 100 100 000 - 96514 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 67772 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 236 +244 Average_Erase_Count ------ 100 100 000 - 1382 +245 Max_Erase_Count ------ 100 100 000 - 1439 +246 Total_Erase_Count ------ 100 100 000 - 5307432 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 54640 --- Power-on Hours +0x01 0x018 6 142129539092 --- Logical Sectors Written +0x01 0x028 6 495213917 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 45 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 46 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/8EF7D052B31C b/SSD/Kingston/SA400/SA400S37120G/8EF7D052B31C new file mode 100644 index 000000000..f53aac4b9 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/8EF7D052B31C @@ -0,0 +1,171 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Apr 8 18:51:02 2025 IDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15690 + 12 Power_Cycle_Count -O--CK 100 100 000 - 649 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 13 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/9 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 516 (Average 482) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 596 +194 Temperature_Celsius -O---K 066 055 000 - 34 (Min/Max 19/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 049 049 000 - 51 +233 Flash_Writes_GiB -O--CK 100 100 000 - 43166 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 28701 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 20111 +244 Average_Erase_Count ------ 100 100 000 - 482 +245 Max_Erase_Count ------ 100 100 000 - 516 +246 Total_Erase_Count ------ 100 100 000 - 1856752 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 649 --- Lifetime Power-On Resets +0x01 0x010 4 15690 --- Power-on Hours +0x01 0x018 6 60192341695 --- Logical Sectors Written +0x01 0x028 6 42176438923 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 48 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/A0617D59220F b/SSD/Kingston/SA400/SA400S37120G/A0617D59220F new file mode 100644 index 000000000..142f1d729 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/A0617D59220F @@ -0,0 +1,129 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090004 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 22 04:46:52 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27254 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 176 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/71 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius -O---K 028 034 000 - 28 (Min/Max 22/34) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 089 089 000 - 89 +233 Flash_Writes_GiB -O--CK 100 100 000 - 16190 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 12314 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 504 +244 Average_Erase_Count ------ 100 100 000 - 117 +245 Max_Erase_Count ------ 100 100 000 - 125 +246 Total_Erase_Count ------ 100 100 000 - 49964 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/A55866D53109 b/SSD/Kingston/SA400/SA400S37120G/A55866D53109 new file mode 100644 index 000000000..8b422d36b --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/A55866D53109 @@ -0,0 +1,161 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 120,033,041,920 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 15 17:40:17 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3625 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3858 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 26 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/18 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 118 (Average 95) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 773 +194 Temperature_Celsius -O---K 072 051 000 - 28 (Min/Max 13/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 010 010 000 - 90 +233 Flash_Writes_GiB -O--CK 100 100 000 - 6144 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 4538 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 8199 +244 Average_Erase_Count ------ 100 100 000 - 95 +245 Max_Erase_Count ------ 100 100 000 - 118 +246 Total_Erase_Count ------ 100 100 000 - 364320 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 3624 - +# 2 Short offline Completed without error 00% 3624 - +# 3 Extended offline Completed without error 00% 3560 - +# 4 Short offline Completed without error 00% 3549 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3858 --- Lifetime Power-On Resets +0x01 0x010 4 3625 --- Power-on Hours +0x01 0x018 6 9518092115 --- Logical Sectors Written +0x01 0x028 6 17195070069 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/A793238D08C7 b/SSD/Kingston/SA400/SA400S37120G/A793238D08C7 new file mode 100644 index 000000000..cdb67a345 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/A793238D08C7 @@ -0,0 +1,307 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Nov 27 02:25:01 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 903 + 9 Power_On_Hours -O--CK 100 100 000 - 837 + 12 Power_Cycle_Count -O--CK 100 100 000 - 377 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 17 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/12 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 53 (Average 42) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 230 +194 Temperature_Celsius -O---K 033 045 000 - 33 (Min/Max 17/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 80 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 3148 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 2450 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1951 +244 Average_Erase_Count ------ 100 100 000 - 42 +245 Max_Erase_Count ------ 100 100 000 - 53 +246 Total_Erase_Count ------ 100 100 000 - 160864 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 981 (device log contains only the most recent 256 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 981 [212] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 6f 14 e8 6f 14 e8 e0 00 Error: UNC 2056 sectors at LBA = 0x6f14e86f14e8 = 122135589623016 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 6f 14 e8 6f 14 e8 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 60 6f 14 e8 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 71 30 00 6f 14 60 e0 00 00:00:00.000 READ DMA + ca 00 00 08 08 11 30 10 71 30 00 e0 00 00:00:00.000 WRITE DMA + ca 00 00 08 08 71 30 00 11 30 10 e0 00 00:00:00.000 WRITE DMA + +Error 980 [211] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 6f 14 60 6f 14 e8 e0 00 Error: UNC 2056 sectors at LBA = 0x6f14606f14e8 = 122133307921640 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 6f 14 60 6f 14 e8 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 71 30 00 6f 14 60 e0 00 00:00:00.000 READ DMA + ca 00 00 08 08 11 30 10 71 30 00 e0 00 00:00:00.000 WRITE DMA + ca 00 00 08 08 71 30 00 11 30 10 e0 00 00:00:00.000 WRITE DMA + c8 00 00 08 08 6f 14 e0 71 30 00 e0 00 00:00:00.000 READ DMA + +Error 979 [210] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 6f 14 e0 6f 14 e0 e0 00 Error: UNC 2056 sectors at LBA = 0x6f14e06f14e0 = 122135455405280 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 6f 14 e0 6f 14 e0 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 58 6f 14 e0 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 d8 6f 14 58 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 50 6f 14 d8 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 d0 6f 14 50 e0 00 00:00:00.000 READ DMA + +Error 978 [209] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 6f 14 58 6f 14 e0 e0 00 Error: UNC 2056 sectors at LBA = 0x6f14586f14e0 = 122133173703904 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 6f 14 58 6f 14 e0 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 d8 6f 14 58 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 50 6f 14 d8 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 d0 6f 14 50 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 6f 14 48 6f 14 d0 e0 00 00:00:00.000 READ DMA + +Error 977 [208] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 c8 28 ad 46 11 80 e0 00 Error: UNC 2056 sectors at LBA = 0xc828ad461180 = 220077031297408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 c8 28 ad 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 46 11 80 c8 28 ad e1 00 00:00:00.000 READ DMA + c8 00 00 08 08 c8 24 a2 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 46 11 80 c8 24 a2 e1 00 00:00:00.000 READ DMA + c8 00 00 08 08 c8 28 a5 46 11 80 e0 00 00:00:00.000 READ DMA + +Error 976 [207] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 c8 24 a2 46 11 80 e0 00 Error: UNC 2056 sectors at LBA = 0xc824a2461180 = 220059666878848 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 c8 24 a2 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 46 11 80 c8 24 a2 e1 00 00:00:00.000 READ DMA + c8 00 00 08 08 c8 28 a5 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 46 11 80 c8 28 a5 e1 00 00:00:00.000 READ DMA + c8 00 00 10 08 cf b1 d0 46 11 80 e0 00 00:00:00.000 READ DMA + +Error 975 [206] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 08 08 c8 28 a5 46 11 80 e0 00 Error: UNC 2056 sectors at LBA = 0xc828a5461180 = 220076897079680 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 08 08 c8 28 a5 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 08 08 46 11 80 c8 28 a5 e1 00 00:00:00.000 READ DMA + c8 00 00 10 08 cf b1 d0 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 10 10 cf b1 c0 cf b1 d0 e1 00 00:00:00.000 READ DMA + c8 00 00 08 10 c8 2b 0d cf b1 c0 e1 00 00:00:00.000 READ DMA + +Error 974 [205] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 10 08 cf b1 d0 46 11 80 e0 00 Error: UNC 4104 sectors at LBA = 0xcfb1d0461180 = 228362610413952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 10 08 cf b1 d0 46 11 80 e0 00 00:00:00.000 READ DMA + c8 00 00 10 10 cf b1 c0 cf b1 d0 e1 00 00:00:00.000 READ DMA + c8 00 00 08 10 c8 2b 0d cf b1 c0 e1 00 00:00:00.000 READ DMA + c8 00 00 08 08 46 11 98 c8 2b 0d e1 00 00:00:00.000 READ DMA + c8 00 00 08 08 e2 0d b0 46 11 98 e0 00 00:00:00.000 READ DMA + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 377 --- Lifetime Power-On Resets +0x01 0x010 4 837 --- Power-on Hours +0x01 0x018 6 5138922429 --- Logical Sectors Written +0x01 0x028 6 4091861027 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 903 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 80 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/AD932209811A b/SSD/Kingston/SA400/SA400S37120G/AD932209811A new file mode 100644 index 000000000..5c76ae36c --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/AD932209811A @@ -0,0 +1,129 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090004 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 22 04:46:52 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27254 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 203 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/82 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius -O---K 029 035 000 - 29 (Min/Max 23/35) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 089 089 000 - 89 +233 Flash_Writes_GiB -O--CK 100 100 000 - 16123 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 12321 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 532 +244 Average_Erase_Count ------ 100 100 000 - 117 +245 Max_Erase_Count ------ 100 100 000 - 124 +246 Total_Erase_Count ------ 100 100 000 - 49853 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/D7F873938F83 b/SSD/Kingston/SA400/SA400S37120G/D7F873938F83 new file mode 100644 index 000000000..1a15919fa --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/D7F873938F83 @@ -0,0 +1,93 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Firmware Version: 03070009 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Apr 24 15:47:27 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1026 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 619 +148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 32 +170 Bad_Blk_Ct_Lat/Erl 0x0000 100 100 010 Old_age Offline - 0/38 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 106 +194 Temperature_Celsius 0x0022 024 025 000 Old_age Always - 24 (Min/Max 22/25) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 1 +233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 2111 +241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 1878 +242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 2546 +244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 14 +245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 18 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 19694 + +SMART Error Log not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + diff --git a/SSD/Kingston/SA400/SA400S37120G/DDEDF6C34FBD b/SSD/Kingston/SA400/SA400S37120G/DDEDF6C34FBD new file mode 100644 index 000000000..86edc2056 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/DDEDF6C34FBD @@ -0,0 +1,161 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Mar 2 11:39:40 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 36021 + 12 Power_Cycle_Count -O--CK 100 100 000 - 234 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 11 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 31 (Average 18) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 39 +194 Temperature_Celsius -O---K 072 060 000 - 28 (Min/Max 21/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 002 002 000 - 98 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1991 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1444 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1125 +244 Average_Erase_Count ------ 100 100 000 - 18 +245 Max_Erase_Count ------ 100 100 000 - 31 +246 Total_Erase_Count ------ 100 100 000 - 73528 +246 Total_Erase_Count ------ 100 100 000 - 73528 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 234 --- Lifetime Power-On Resets +0x01 0x010 4 36021 --- Power-on Hours +0x01 0x018 6 3030027614 --- Logical Sectors Written +0x01 0x028 6 2361128213 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/E3B8F59E96E5 b/SSD/Kingston/SA400/SA400S37120G/E3B8F59E96E5 new file mode 100644 index 000000000..7df8568ae --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/E3B8F59E96E5 @@ -0,0 +1,203 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK71E0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 16 09:37:59 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 25938 + 12 Power_Cycle_Count -O--C- 100 100 000 - 77 +148 Unknown_Attribute ------ 255 255 000 - 21 +149 Unknown_Attribute ------ 255 255 000 - 10 +167 Write_Protect_Mode -O---K 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 6 +170 Bad_Blk_Ct_Lat/Erl PO--C- 100 100 010 - 0/7 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 75 (Average 48) +181 Program_Fail_Count -O--C- 100 100 000 - 0 +182 Erase_Fail_Count ------ 255 255 000 - 3 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius PO---K 066 061 000 - 34 (Min/Max 18/39) +196 Reallocated_Event_Count ------ 100 100 000 - 3 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count ------ 100 100 000 - 25 +231 SSD_Life_Left PO--C- 100 100 000 - 95 +233 Flash_Writes_GiB PO--C- 100 100 000 - 3134 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 6903 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 144 +244 Average_Erase_Count ------ 100 100 000 - 48 +245 Max_Erase_Count ------ 100 100 000 - 75 +246 Total_Erase_Count ------ 100 100 000 - 286200 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 1058 hours (44 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.000 READ DMA EXT + 25 00 00 00 04 00 00 00 00 00 40 40 00 00:00:00.000 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.000 READ DMA EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE + b0 00 d2 00 f1 00 00 00 c2 4f 00 00 00 00:00:00.000 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17187 - +# 2 Short offline Completed without error 00% 1619 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 77 --- Lifetime Power-On Resets +0x01 0x010 4 25938 --- Power-on Hours +0x01 0x018 6 14477086690 --- Logical Sectors Written +0x01 0x028 6 302354424 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 25 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 107 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 108 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/E4BB85DB44B6 b/SSD/Kingston/SA400/SA400S37120G/E4BB85DB44B6 new file mode 100644 index 000000000..f063f864a --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/E4BB85DB44B6 @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 18 16:15:48 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 35482 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 +148 Unknown_Attribute ------ 100 100 000 - 112 +149 Unknown_Attribute ------ 100 100 000 - 42 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 25 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 176 (Average 131) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 14 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius -O---K 068 055 000 - 32 (Min/Max 18/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 14 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 014 014 000 - 86 +233 Flash_Writes_GiB -O--CK 100 100 000 - 11017 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 6399 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 16175 +244 Average_Erase_Count ------ 100 100 000 - 131 +245 Max_Erase_Count ------ 100 100 000 - 176 +246 Total_Erase_Count ------ 100 100 000 - 505376 +246 Total_Erase_Count ------ 100 100 000 - 505376 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 35482 --- Power-on Hours +0x01 0x018 6 13420470673 --- Logical Sectors Written +0x01 0x028 6 33923271150 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/ED4596DCCE46 b/SSD/Kingston/SA400/SA400S37120G/ED4596DCCE46 new file mode 100644 index 000000000..7e7efbe9e --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/ED4596DCCE46 @@ -0,0 +1,127 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090005 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri May 30 10:16:37 2025 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24158 + 12 Power_Cycle_Count -O--CK 100 100 000 - 41 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 282 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/114 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 31 +194 Temperature_Celsius -O---K 035 036 000 - 36 (Min/Max 24/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 096 096 000 - 96 +233 Flash_Writes_GiB -O--CK 100 100 000 - 6145 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 5423 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 41 +244 Average_Erase_Count ------ 100 100 000 - 48 +245 Max_Erase_Count ------ 100 100 000 - 54 +246 Total_Erase_Count ------ 100 100 000 - 20596 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37120G/F024A7648C23 b/SSD/Kingston/SA400/SA400S37120G/F024A7648C23 new file mode 100644 index 000000000..f85313e0a --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/F024A7648C23 @@ -0,0 +1,128 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p4 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090005 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 11 02:39:35 2025 HKT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 28362 + 12 Power_Cycle_Count -O--CK 100 100 000 - 60 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 205 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/83 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 24 +194 Temperature_Celsius -O---K 033 040 000 - 32 (Min/Max 24/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 043 043 000 - 43 +233 Flash_Writes_GiB -O--CK 100 100 000 - 86265 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 18876 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 319 +244 Average_Erase_Count ------ 100 100 000 - 576 +245 Max_Erase_Count ------ 100 100 000 - 611 +246 Total_Erase_Count ------ 100 100 000 - 245663 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 20% 0 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37120G/F7BDF618310C b/SSD/Kingston/SA400/SA400S37120G/F7BDF618310C new file mode 100644 index 000000000..a68ff5843 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/F7BDF618310C @@ -0,0 +1,129 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090004 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 16 01:00:46 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 950 + 12 Power_Cycle_Count -O--CK 100 100 000 - 329 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 324 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/131 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 107 +194 Temperature_Celsius -O---K 035 037 000 - 35 (Min/Max 35/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1006 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 919 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 794 +244 Average_Erase_Count ------ 100 100 000 - 8 +245 Max_Erase_Count ------ 100 100 000 - 12 +246 Total_Erase_Count ------ 100 100 000 - 3435 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/F8428BAFB3B2 b/SSD/Kingston/SA400/SA400S37120G/F8428BAFB3B2 new file mode 100644 index 000000000..cd3dae2b3 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/F8428BAFB3B2 @@ -0,0 +1,128 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: 03090005 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat May 17 06:27:54 2025 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 28102 + 12 Power_Cycle_Count -O--CK 100 100 000 - 30 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 223 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/90 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 15 +194 Temperature_Celsius -O---K 029 035 000 - 30 (Min/Max 21/35) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 002 002 000 - 2 +233 Flash_Writes_GiB -O--CK 100 100 000 - 133935 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 65546 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 100 +244 Average_Erase_Count ------ 100 100 000 - 982 +245 Max_Erase_Count ------ 100 100 000 - 1020 +246 Total_Erase_Count ------ 100 100 000 - 418392 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 95 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37120G/FE18868FAC10 b/SSD/Kingston/SA400/SA400S37120G/FE18868FAC10 new file mode 100644 index 000000000..b1b46bac9 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/FE18868FAC10 @@ -0,0 +1,172 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK71E0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Feb 19 17:19:31 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 16) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 199 + 12 Power_Cycle_Count -O--CK 100 100 000 - 813 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 36 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/41 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 41 (Average 17) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 517 +194 Temperature_Celsius -O---K 072 059 000 - 28 (Min/Max 3/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 002 002 000 - 98 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1842 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1704 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1713 +244 Average_Erase_Count ------ 100 100 000 - 17 +245 Max_Erase_Count ------ 100 100 000 - 41 +246 Total_Erase_Count ------ 100 100 000 - 97536 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 00% 0 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 813 --- Lifetime Power-On Resets +0x01 0x010 4 199 --- Power-on Hours +0x01 0x018 6 3574396525 --- Logical Sectors Written +0x01 0x028 6 3593661328 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 3 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37240G/02AC49A5DA49 b/SSD/Kingston/SA400/SA400S37240G/02AC49A5DA49 new file mode 100644 index 000000000..cebcaabec --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/02AC49A5DA49 @@ -0,0 +1,95 @@ +smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: S1Z40102 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jan 6 11:10:31 2025 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 100 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4698 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2306 +148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 210 +169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 0 +170 Bad_Blk_Ct_Lat/Erl 0x0000 100 100 010 Old_age Offline - 0/0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 403 +194 Temperature_Celsius 0x0022 036 055 000 Old_age Always - 36 (Min/Max 30/55) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 210 +231 SSD_Life_Left 0x0000 095 095 000 Old_age Offline - 95 +233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 4212 +241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 3480 +242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 921 +244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 56 +245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 99 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 27887 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +The above only provides legacy SMART information - try 'smartctl -x' for more + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/09F7DF9D6BCF b/SSD/Kingston/SA400/SA400S37240G/09F7DF9D6BCF new file mode 100644 index 000000000..e718480ab --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/09F7DF9D6BCF @@ -0,0 +1,158 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61K1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 3 09:08:52 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 20730 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11583 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 16 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/76 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 166 (Average 126) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 206 +194 Temperature_Celsius -O---K 061 068 000 - 39 (Min/Max 21/68) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 17694 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 48043 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 10711 +244 Average_Erase_Count ------ 100 100 000 - 126 +245 Max_Erase_Count ------ 100 100 000 - 166 +246 Total_Erase_Count ------ 100 100 000 - 2767488 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11583 --- Lifetime Power-On Resets +0x01 0x010 4 20730 --- Power-on Hours +0x01 0x018 6 100754921309 --- Logical Sectors Written +0x01 0x028 6 22464210057 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x020 1 68 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37240G/1D5510C98995 b/SSD/Kingston/SA400/SA400S37240G/1D5510C98995 new file mode 100644 index 000000000..1ab4e7300 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/1D5510C98995 @@ -0,0 +1,208 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Mar 8 14:46:15 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2874 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4211 +148 Unknown_Attribute ------ 255 255 000 - 0 +149 Unknown_Attribute ------ 255 255 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 16 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/11 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 122 (Average 83) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 255 255 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 516 +194 Temperature_Celsius -O---K 069 054 000 - 31 (Min/Max 0/46) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count ------ 100 100 000 - 7 +231 SSD_Life_Left PO--C- 100 100 000 - 91 +233 Flash_Writes_GiB PO--C- 100 100 000 - 18176 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 12239 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 20909 +244 Average_Erase_Count ------ 100 100 000 - 83 +245 Max_Erase_Count ------ 100 100 000 - 122 +246 Total_Erase_Count ------ 100 100 000 - 643072 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 08 00 00 00 00 7a fa 10 40 00 Error: ICRC, ABRT 2048 sectors at LBA = 0x007afa10 = 8059408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 08 00 00 00 00 7a fa 10 40 00 00:00:00.000 READ DMA EXT + 25 00 00 08 00 00 00 03 8b bb f0 40 00 00:00:00.000 READ DMA EXT + 25 00 00 08 00 00 00 1b d2 70 c0 40 00 00:00:00.000 READ DMA EXT + 25 00 00 08 00 00 00 00 71 b9 80 40 00 00:00:00.000 READ DMA EXT + 25 00 00 08 00 00 00 09 a7 81 00 40 00 00:00:00.000 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1603 - +# 2 Short offline Completed without error 00% 1597 - +# 3 Short offline Completed without error 00% 1588 - +# 4 Short offline Completed without error 00% 1567 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4211 --- Lifetime Power-On Resets +0x01 0x010 4 2874 --- Power-on Hours +0x01 0x018 6 25667057350 --- Logical Sectors Written +0x01 0x028 6 43849864948 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 7 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/1EBA205E1573 b/SSD/Kingston/SA400/SA400S37240G/1EBA205E1573 new file mode 100644 index 000000000..5c3b5b6c3 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/1EBA205E1573 @@ -0,0 +1,127 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Firmware Version: 03070009 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 25 19:28:34 2025 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 45108 + 12 Power_Cycle_Count -O--CK 100 100 000 - 16 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 38 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/90 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 8 +194 Temperature_Celsius -O---K 022 026 000 - 22 (Min/Max 22/26) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 015 015 000 - 85 +233 Flash_Writes_GiB -O--CK 100 100 000 - 273421 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 92723 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1691 +244 Average_Erase_Count ------ 100 100 000 - 850 +245 Max_Erase_Count ------ 100 100 000 - 878 +246 Total_Erase_Count ------ 100 100 000 - 1137771 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37240G/1FB70A275677 b/SSD/Kingston/SA400/SA400S37240G/1FB70A275677 new file mode 100644 index 000000000..569e8a6e1 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/1FB70A275677 @@ -0,0 +1,154 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKT1.3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 11 18:13:02 2025 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6803 + 12 Power_Cycle_Count -O--CK 100 100 000 - 378 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 51 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/44 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 39 (Average 35) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 173 +194 Temperature_Celsius -O---K 033 040 000 - 33 (Min/Max 19/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 65536 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 3627 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 2488 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1492 +244 Average_Erase_Count ------ 100 100 000 - 35 +245 Max_Erase_Count ------ 100 100 000 - 39 +246 Total_Erase_Count ------ 100 100 000 - 275968 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 378 --- Lifetime Power-On Resets +0x01 0x010 4 6803 --- Power-on Hours +0x01 0x018 6 5219572846 --- Logical Sectors Written +0x01 0x028 6 3129209313 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37240G/27680446D4AD b/SSD/Kingston/SA400/SA400S37240G/27680446D4AD new file mode 100644 index 000000000..dd7dbe29c --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/27680446D4AD @@ -0,0 +1,145 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SAJ20103 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Sep 2 06:29:25 2025 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 17760 + 12 Power_Cycle_Count -O--CK 100 100 000 - 77 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 58 +194 Temperature_Celsius -O---K 027 036 000 - 27 (Min/Max 14/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 086 086 000 - 86 +233 Flash_Writes_GiB -O--CK 100 100 000 - 536 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 13279 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 19 +244 Average_Erase_Count ------ 100 100 000 - 148 +245 Max_Erase_Count ------ 100 100 000 - 151 +246 Total_Erase_Count ------ 100 100 000 - 225617 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17758 - +# 2 Short offline Aborted by host 90% 1 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 77 --- Lifetime Power-On Resets +0x01 0x010 4 17760 --- Power-on Hours +0x01 0x018 6 2078680229 --- Logical Sectors Written +0x01 0x020 6 46329 --- Number of Write Commands +0x01 0x028 6 41525296 --- Logical Sectors Read +0x01 0x030 6 155641 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 23 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37240G/34F222F39989 b/SSD/Kingston/SA400/SA400S37240G/34F222F39989 new file mode 100644 index 000000000..2b138badc --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/34F222F39989 @@ -0,0 +1,144 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SAH20107 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue May 6 15:31:11 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 44 + 12 Power_Cycle_Count -O--CK 100 100 000 - 21 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 17 +194 Temperature_Celsius -O---K 026 026 000 - 26 (Min/Max 24/26) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 7 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 6 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 5 +244 Average_Erase_Count ------ 100 100 000 - 0 +245 Max_Erase_Count ------ 100 100 000 - 1 +246 Total_Erase_Count ------ 100 100 000 - 46 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 44 --- Power-on Hours +0x01 0x018 6 13620457 --- Logical Sectors Written +0x01 0x020 6 7778 --- Number of Write Commands +0x01 0x028 6 10658615 --- Logical Sectors Read +0x01 0x030 6 10578 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37240G/37E566A7D438 b/SSD/Kingston/SA400/SA400S37240G/37E566A7D438 new file mode 100644 index 000000000..027322d8a --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/37E566A7D438 @@ -0,0 +1,222 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 21 20:41:47 2025 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 16219 + 12 Power_Cycle_Count -O--CK 100 100 000 - 751 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 14 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 000 - 0/10 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 259 (Average 233) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 349 +194 Temperature_Celsius -O---K 075 042 000 - 25 (Min/Max 18/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 3 +231 SSD_Life_Left ------ 024 024 000 - 76 +233 Flash_Writes_GiB -O--CK 100 100 000 - 49107 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 26206 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 12615 +244 Average_Erase_Count ------ 100 100 000 - 233 +245 Max_Erase_Count ------ 100 100 000 - 259 +246 Total_Erase_Count ------ 100 100 000 - 1801184 +246 Total_Erase_Count ------ 100 100 000 - 1801184 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 00 00 00 01 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.000 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.000 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.000 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.000 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.000 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15473 - +# 2 Short offline Completed without error 00% 15472 - +# 3 Short offline Completed without error 00% 15471 - +# 4 Short offline Completed without error 00% 15470 - +# 5 Short offline Completed without error 00% 15469 - +# 6 Short offline Completed without error 00% 15468 - +# 7 Short offline Completed without error 00% 15467 - +# 8 Short offline Completed without error 00% 15466 - +# 9 Short offline Completed without error 00% 15465 - +#10 Short offline Completed without error 00% 15464 - +#11 Short offline Completed without error 00% 15463 - +#12 Short offline Completed without error 00% 15462 - +#13 Short offline Completed without error 00% 15461 - +#14 Short offline Completed without error 00% 15460 - +#15 Short offline Completed without error 00% 15459 - +#16 Short offline Completed without error 00% 15458 - +#17 Short offline Completed without error 00% 15457 - +#18 Short offline Completed without error 00% 15456 - +#19 Short offline Completed without error 00% 15455 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 751 --- Lifetime Power-On Resets +0x01 0x010 4 16219 --- Power-on Hours +0x01 0x018 6 54958377384 --- Logical Sectors Written +0x01 0x028 6 26457209327 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 3 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 23 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37240G/3A5F6ED1E46B b/SSD/Kingston/SA400/SA400S37240G/3A5F6ED1E46B new file mode 100644 index 000000000..0d445e592 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/3A5F6ED1E46B @@ -0,0 +1,143 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: S3500105 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 13 18:01:23 2025 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 3838 + 12 Power_Cycle_Count -O--CK 100 100 000 - 233 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 191 +194 Temperature_Celsius -O---K 024 036 000 - 24 (Min/Max 10/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 096 096 000 - 96 +233 Flash_Writes_GiB -O--CK 100 100 000 - 807 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 2735 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 631 +244 Average_Erase_Count ------ 100 100 000 - 47 +245 Max_Erase_Count ------ 100 100 000 - 52 +246 Total_Erase_Count ------ 100 100 000 - 10808 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 233 --- Lifetime Power-On Resets +0x01 0x010 4 3838 --- Power-on Hours +0x01 0x018 6 1441843113 --- Logical Sectors Written +0x01 0x020 6 2078464 --- Number of Write Commands +0x01 0x028 6 1324467350 --- Logical Sectors Read +0x01 0x030 6 98109 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37240G/486FFA921BB5 b/SSD/Kingston/SA400/SA400S37240G/486FFA921BB5 new file mode 100644 index 000000000..e68a44ff5 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/486FFA921BB5 @@ -0,0 +1,157 @@ +smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) +Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKT1A3 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5528 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Feb 8 18:49:21 2025 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 169 + 12 Power_Cycle_Count -O--CK 100 100 000 - 24 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 63 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/55 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 1 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 13 +194 Temperature_Celsius -O---K 037 037 000 - 37 (Min/Max 23/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 131116 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 37 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 33 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 4 +244 Average_Erase_Count ------ 100 100 000 - 0 +245 Max_Erase_Count ------ 100 100 000 - 1 +246 Total_Erase_Count ------ 100 100 000 - 3504 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 169 --- Power-on Hours +0x01 0x018 6 69766493 --- Logical Sectors Written +0x01 0x028 6 9823118 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/534C93691D8B b/SSD/Kingston/SA400/SA400S37240G/534C93691D8B new file mode 100644 index 000000000..5b918ba34 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/534C93691D8B @@ -0,0 +1,158 @@ +smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE amd64] (local build) +Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SAI20103 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.5/5706 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 8 00:22:36 2025 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 1618 + 12 Power_Cycle_Count -O--CK 100 100 000 - 639 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 1 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Lat/Erl ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 70 +194 Temperature_Celsius -O---K 026 049 000 - 26 (Min/Max 18/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 1 +231 SSD_Life_Left ------ 094 094 000 - 94 +233 Flash_Writes_GiB -O--CK 100 100 000 - 2398 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 3693 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 3580 +244 Average_Erase_Count ------ 100 100 000 - 60 +245 Max_Erase_Count ------ 100 100 000 - 144 +246 Total_Erase_Count ------ 100 100 000 - 100840 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 639 --- Lifetime Power-On Resets +0x01 0x010 4 1618 --- Power-on Hours +0x01 0x018 6 3451339941 --- Logical Sectors Written +0x01 0x020 6 54011 --- Number of Write Commands +0x01 0x028 6 3214393164 --- Logical Sectors Read +0x01 0x030 6 11675 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +