mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 194, modified: 0)
This commit is contained in:
Andrey Ponomarenko
106
SSD/Transcend/TS64/TS64GMTS400S/9A181255200D
Normal file
106
SSD/Transcend/TS64/TS64GMTS400S/9A181255200D
Normal file
@@ -0,0 +1,106 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [DragonFly 6.0-RELEASE x86_64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS64GMTS400S
|
||||
Serial Number: --
|
||||
Firmware Version: P1225CH1
|
||||
User Capacity: 64,023,257,088 bytes [64.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu May 27 23:21:18 2021 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
||||
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
|
||||
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 341
|
||||
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 433
|
||||
160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0
|
||||
161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 44
|
||||
163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 0
|
||||
164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 28308
|
||||
165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 89
|
||||
166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 0
|
||||
167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 27
|
||||
168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000
|
||||
169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100
|
||||
175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
|
||||
178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0
|
||||
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 6
|
||||
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 44
|
||||
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
|
||||
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
|
||||
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
|
||||
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
|
||||
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
||||
241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 33714
|
||||
242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 3387
|
||||
245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 56616
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
Reference in New Issue
Block a user