80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 3637, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2022-03-18 23:39:11 +03:00
parent 9495463568
commit b1c41e7edc
3830 changed files with 648855 additions and 4579 deletions
Download Patch File Download Diff File Expand all files Collapse all files

96
HDD/Fujitsu/MHV2100/MHV2100BH PL/D574EBA050E7 Normal file
View File

@@ -0,0 +1,96 @@
smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.9] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV
Device Model: FUJITSU MHV2100BH PL
Serial Number: --
Firmware Version: 00000029
User Capacity: 100,030,242,816 bytes [100 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
Local Time is: Wed Jul 21 18:46:50 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 591) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 69) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 53766
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 27328512
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 3893
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 (2000 0)
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 1223
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0032 074 074 000 Old_age Always - 13274h+25m+28s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3865
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 104
193 Load_Cycle_Count 0x0032 075 075 000 Old_age Always - 500252
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 42 (Min/Max 13/55)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 672
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 (0 6839)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 14821
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 429540508058
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3754 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

308
HDD/Fujitsu/MHV2120/MHV2120BH PL/331F7A55B020 Normal file
View File

@@ -0,0 +1,308 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV
Device Model: FUJITSU MHV2120BH PL
Serial Number: --
Firmware Version: 892C
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
Local Time is: Tue Jul 20 17:33:51 2021 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 702) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 64244
2 Throughput_Performance P-S--- 100 100 030 - 26673639
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 2757
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 1667
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Seconds -O--CK 084 084 000 - 2h+13m+49s
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2717
192 Power-Off_Retract_Count -O--CK 100 100 000 - 195
193 Load_Cycle_Count -O--CK 097 097 000 - 73101
194 Temperature_Celsius -O---K 100 100 000 - 37 (Min/Max 9/60)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1965
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6486)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 18588
203 Run_Out_Cancel -O---- 100 100 000 - 2632803353286
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 44
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 44 [43] occurred at disk power-on lifetime: 5273 hours (219 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 60 00 00 03 11 88 37 e0 00 Error: ICRC, ABRT 96 sectors at LBA = 0x03118837 = 51480631
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 03 11 87 a7 e0 00 00:00:54.130 READ DMA EXT
25 00 03 00 10 00 00 03 11 87 97 e0 00 00:00:54.130 READ DMA EXT
25 00 03 00 f0 00 00 03 11 86 a7 e0 00 00:00:54.126 READ DMA EXT
25 00 03 00 10 00 00 03 11 86 97 e0 00 00:00:54.125 READ DMA EXT
25 00 03 00 f0 00 00 03 11 85 a7 e0 00 00:00:54.122 READ DMA EXT
Error 43 [42] occurred at disk power-on lifetime: 5273 hours (219 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 a0 00 00 03 01 14 f7 e0 00 Error: ICRC, ABRT 160 sectors at LBA = 0x030114f7 = 50402551
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 03 01 14 a7 e0 00 00:00:33.422 READ DMA EXT
25 00 03 00 10 00 00 03 01 14 97 e0 00 00:00:33.421 READ DMA EXT
25 00 03 00 f0 00 00 03 01 13 a7 e0 00 00:00:33.418 READ DMA EXT
25 00 03 00 10 00 00 03 01 13 97 e0 00 00:00:33.417 READ DMA EXT
25 00 03 00 f0 00 00 03 01 12 a7 e0 00 00:00:33.412 READ DMA EXT
Error 42 [41] occurred at disk power-on lifetime: 5273 hours (219 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 60 00 00 05 50 c5 7f e0 00 Error: ICRC, ABRT 96 sectors at LBA = 0x0550c57f = 89179519
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 05 50 c4 ef e0 00 00:48:47.366 READ DMA EXT
25 00 03 00 10 00 00 05 50 c4 df e0 00 00:48:47.365 READ DMA EXT
25 00 03 00 f0 00 00 05 50 c3 ef e0 00 00:48:47.362 READ DMA EXT
25 00 03 00 10 00 00 05 50 c3 df e0 00 00:48:47.361 READ DMA EXT
25 00 03 00 f0 00 00 05 50 c2 ef e0 00 00:48:47.358 READ DMA EXT
Error 41 [40] occurred at disk power-on lifetime: 5268 hours (219 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 30 00 00 06 8c f5 67 e0 00 Error: ICRC, ABRT 48 sectors at LBA = 0x068cf567 = 109901159
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 f0 00 00 06 8c f4 a7 e0 00 00:00:33.832 READ DMA EXT
25 00 03 00 10 00 00 06 8c f4 97 e0 00 00:00:33.832 READ DMA EXT
25 00 03 00 f0 00 00 06 8c f3 a7 e0 00 00:00:33.828 READ DMA EXT
25 00 03 00 10 00 00 06 8c f3 97 e0 00 00:00:33.828 READ DMA EXT
25 00 03 00 f0 00 00 06 8c f2 a7 e0 00 00:00:33.824 READ DMA EXT
Error 40 [39] occurred at disk power-on lifetime: 5264 hours (219 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 00 82 d6 9f e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x0082d69f = 8574623
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 00 82 d6 8f e0 00 00:18:32.091 READ DMA EXT
25 00 03 00 80 00 00 00 82 d6 0f e0 00 00:18:32.088 READ DMA EXT
25 00 03 00 80 00 00 00 82 d5 0f e0 00 00:18:32.085 READ DMA EXT
25 00 03 00 80 00 00 00 82 d5 8f e0 00 00:18:32.083 READ DMA EXT
25 00 03 00 80 00 00 00 82 d4 8f e0 00 00:18:32.081 READ DMA EXT
Error 39 [38] occurred at disk power-on lifetime: 5264 hours (219 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 56 9e f6 e0 00 Error: ICRC, ABRT at LBA = 0x00569ef6 = 5676790
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 08 00 00 00 56 9e ef e0 00 00:00:33.571 READ DMA EXT
25 00 03 00 08 00 00 00 55 d7 87 e0 00 00:00:33.567 READ DMA EXT
25 00 03 00 08 00 00 00 59 c3 c7 e0 00 00:00:33.559 READ DMA EXT
25 00 03 00 08 00 00 00 59 22 e7 e0 00 00:00:33.550 READ DMA EXT
25 00 03 00 08 00 00 00 58 95 47 e0 00 00:00:33.545 READ DMA EXT
Error 38 [37] occurred at disk power-on lifetime: 5258 hours (219 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 01 bf a2 af e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x01bfa2af = 29336239
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 01 bf a2 9f e0 00 00:08:43.104 READ DMA EXT
25 00 03 00 80 00 00 01 bf a2 1f e0 00 00:08:43.102 READ DMA EXT
25 00 03 00 80 00 00 01 bf a1 9f e0 00 00:08:43.099 READ DMA EXT
25 00 03 00 80 00 00 01 bf a1 1f e0 00 00:08:43.097 READ DMA EXT
25 00 03 00 80 00 00 01 bf a0 9f e0 00 00:08:43.095 READ DMA EXT
Error 37 [36] occurred at disk power-on lifetime: 5258 hours (219 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 01 bf 8a 2f e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x01bf8a2f = 29329967
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 01 bf 8a 1f e0 00 00:08:42.595 READ DMA EXT
25 00 03 00 80 00 00 01 bf 89 9f e0 00 00:08:42.593 READ DMA EXT
25 00 03 00 80 00 00 01 bf 89 1f e0 00 00:08:42.591 READ DMA EXT
25 00 03 00 80 00 00 01 bf 88 9f e0 00 00:08:42.588 READ DMA EXT
25 00 03 00 80 00 00 01 bf 88 1f e0 00 00:08:42.586 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: --/39 Celsius
Lifetime Min/Max Temperature: --/60 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (79)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

179
HDD/Fujitsu/MHY2160/MHY2160BH/B8658FE93C9F Normal file
View File

@@ -0,0 +1,179 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHY BH
Device Model: FUJITSU MHY2160BH
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0040020B
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3c
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sun Oct 24 02:26:53 2021 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 3 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 107402
2 Throughput_Performance P-S--- 100 100 030 - 37355520
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 2811
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 3124
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 091 091 000 - 4951
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2764
192 Power-Off_Retract_Count -O--CK 100 100 000 - 174
193 Load_Cycle_Count -O--CK 098 098 000 - 57976
194 Temperature_Celsius -O---K 100 100 000 - 41 (Min/Max 11/55)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 34
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6770)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 15587
203 Run_Out_Cancel -O---- 099 097 000 - 425674739836
240 Transfer_Error_Rate -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
# 2 Short offline Completed without error 00% 3 -
# 3 Short offline Completed without error 00% 3 -
# 4 Short offline Completed without error 00% 3 -
# 5 Short offline Completed without error 00% 2 -
# 6 Short offline Completed without error 00% 2 -
# 7 Short offline Completed without error 00% 2 -
# 8 Short offline Completed without error 00% 2 -
# 9 Short offline Completed without error 00% 2 -
#10 Short offline Completed without error 00% 2 -
#11 Short offline Completed without error 00% 1 -
#12 Short offline Completed without error 00% 1 -
#13 Short offline Completed without error 00% 1 -
#14 Short offline Completed without error 00% 1 -
#15 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 40 Celsius
Power Cycle Min/Max Temperature: --/42 Celsius
Lifetime Min/Max Temperature: --/55 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (45)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

339
HDD/Fujitsu/MHY2250/MHY2250BH/1AF973630018 Normal file
View File

@@ -0,0 +1,339 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHY BH
Device Model: FUJITSU MHY2250BH
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0081000D
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sat Jan 29 15:47:13 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 1009) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 143) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 0
2 Throughput_Performance P-S--- 100 100 030 - 0
3 Spin_Up_Time PO---- 100 100 025 - 0
4 Start_Stop_Count -O--CK 097 097 000 - 10511
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0
7 Seek_Error_Rate POSR-- 100 100 047 - 0
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 088 088 000 - 6082
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 6452
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2097295
193 Load_Cycle_Count -O--CK 088 088 000 - 246869
194 Temperature_Celsius -O---K 100 100 000 - 22 (Min/Max 6/51)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 0
203 Run_Out_Cancel -O---- 100 100 000 - 0
240 Transfer_Error_Rate -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 123
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 123 [122] occurred at disk power-on lifetime: 5931 hours (247 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 80 00 00 69 00 08 b8 40 00 Error: ICRC, ABRT 128 sectors at LBA = 0x690008b8 = 1761609912
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 08 00 00 19 67 00 08 38 40 00 01:17:15.956 READ DMA EXT
25 00 00 08 00 00 19 5f 00 08 38 40 00 01:17:15.928 READ DMA EXT
25 00 00 08 00 00 19 57 00 08 38 40 00 01:17:15.873 READ DMA EXT
35 00 00 00 10 00 00 a3 00 07 60 40 00 01:17:15.839 WRITE DMA EXT
35 00 00 00 10 00 00 8b 00 07 e0 40 00 01:17:15.839 WRITE DMA EXT
Error 122 [121] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 50 00 00 d3 00 35 b0 40 00 Error: ICRC, ABRT 80 sectors at LBA = 0xd30035b0 = 3540006320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 08 00 00 0f d1 00 35 00 40 00 00:24:55.254 READ DMA EXT
25 00 00 08 00 00 1b be 00 28 30 40 00 00:24:55.200 READ DMA EXT
25 00 00 08 00 00 17 aa 00 62 d0 40 00 00:24:55.173 READ DMA EXT
25 00 00 08 00 00 17 a2 00 62 d0 40 00 00:24:55.146 READ DMA EXT
25 00 00 08 00 00 17 9a 00 62 d0 40 00 00:24:55.119 READ DMA EXT
Error 121 [120] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 50 00 00 80 00 5b 18 40 00 Error: ICRC, ABRT 80 sectors at LBA = 0x80005b18 = 2147506968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 08 00 00 09 7f 00 5b 68 40 00 00:13:41.530 READ DMA EXT
25 00 00 08 00 00 09 77 00 5b 68 40 00 00:13:41.510 READ DMA EXT
25 00 00 08 00 00 09 6f 00 5b 68 40 00 00:13:41.489 READ DMA EXT
25 00 00 08 00 00 09 67 00 5b 68 40 00 00:13:41.469 READ DMA EXT
25 00 00 08 00 00 09 5f 00 5b 68 40 00 00:13:41.449 READ DMA EXT
Error 120 [119] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 40 00 00 9c 00 df f8 40 00 Error: ICRC, ABRT 64 sectors at LBA = 0x9c00dff8 = 2617303032
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 08 00 00 05 96 00 df 38 40 00 00:08:59.938 READ DMA EXT
25 00 00 08 00 00 05 8e 00 df 38 40 00 00:08:59.918 READ DMA EXT
25 00 00 08 00 00 05 86 00 df 38 40 00 00:08:59.900 READ DMA EXT
25 00 00 08 00 00 05 7e 00 df 38 40 00 00:08:59.880 READ DMA EXT
25 00 00 08 00 00 05 76 00 df 38 40 00 00:08:59.862 READ DMA EXT
Error 119 [118] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 d0 00 00 94 00 ca 80 40 00 Error: ICRC, ABRT 208 sectors at LBA = 0x9400ca80 = 2483079808
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 04 e0 00 05 92 00 ca 70 40 00 00:08:49.865 READ DMA EXT
25 00 00 08 00 00 05 8a 00 ca 70 40 00 00:08:49.843 READ DMA EXT
25 00 00 08 00 00 05 82 00 ca 70 40 00 00:08:49.822 READ DMA EXT
25 00 00 08 00 00 05 7a 00 ca 70 40 00 00:08:49.802 READ DMA EXT
25 00 00 08 00 00 05 72 00 ca 70 40 00 00:08:49.781 READ DMA EXT
Error 118 [117] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 a0 00 00 74 00 bf d8 40 00 Error: ICRC, ABRT 160 sectors at LBA = 0x7400bfd8 = 1946206168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 08 00 00 05 6d 00 bf 78 40 00 00:08:45.636 READ DMA EXT
25 00 00 08 00 00 05 65 00 bf 78 40 00 00:08:45.625 READ DMA EXT
25 00 00 08 00 00 05 5d 00 bf 78 40 00 00:08:45.550 READ DMA EXT
25 00 00 08 00 00 05 55 00 bf 78 40 00 00:08:45.528 READ DMA EXT
25 00 00 08 00 00 05 4d 00 bf 78 40 00 00:08:45.507 READ DMA EXT
Error 117 [116] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 38 00 00 db 00 51 98 40 00 Error: ICRC, ABRT 56 sectors at LBA = 0xdb005198 = 3674231192
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 98 00 05 da 00 51 38 40 00 00:08:34.449 READ DMA EXT
25 00 00 08 00 00 05 d2 00 51 38 40 00 00:08:34.430 READ DMA EXT
25 00 00 08 00 00 05 ca 00 51 38 40 00 00:08:34.409 READ DMA EXT
25 00 00 08 00 00 05 c2 00 51 38 40 00 00:08:34.387 READ DMA EXT
25 00 00 08 00 00 05 ba 00 51 38 40 00 00:08:34.368 READ DMA EXT
Error 116 [115] occurred at disk power-on lifetime: 5930 hours (247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 50 00 00 98 00 4c e0 40 00 Error: ICRC, ABRT 80 sectors at LBA = 0x98004ce0 = 2550156512
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 06 b0 00 05 93 00 4c 80 40 00 00:08:31.112 READ DMA EXT
25 00 00 08 00 00 05 8b 00 4c 80 40 00 00:08:31.092 READ DMA EXT
25 00 00 08 00 00 05 83 00 4c 80 40 00 00:08:31.074 READ DMA EXT
25 00 00 08 00 00 05 7b 00 4c 80 40 00 00:08:31.054 READ DMA EXT
25 00 00 08 00 00 05 73 00 4c 80 40 00 00:08:31.036 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 5788 -
# 2 Short offline Completed without error 00% 5787 -
# 3 Short offline Completed without error 00% 5755 -
# 4 Short offline Completed without error 00% 5712 -
# 5 Short offline Aborted by host 90% 5675 -
# 6 Short offline Completed without error 00% 5675 -
# 7 Short offline Aborted by host 90% 5674 -
# 8 Short offline Aborted by host 90% 5674 -
# 9 Short offline Aborted by host 90% 5674 -
#10 Short offline Aborted by host 90% 5674 -
#11 Short offline Aborted by host 90% 5674 -
#12 Short offline Aborted by host 90% 5674 -
#13 Short offline Aborted by host 90% 5674 -
#14 Short offline Completed without error 00% 5671 -
#15 Short offline Completed without error 00% 5643 -
#16 Short offline Aborted by host 90% 5627 -
#17 Short offline Completed without error 00% 5615 -
#18 Short offline Completed without error 00% 5581 -
#19 Short offline Aborted by host 90% 5581 -
#20 Short offline Aborted by host 90% 5581 -
#21 Short offline Aborted by host 90% 5581 -
#22 Short offline Aborted by host 90% 5581 -
#23 Short offline Aborted by host 90% 5581 -
#24 Short offline Aborted by host 90% 5580 -
#25 Short offline Aborted by host 90% 5580 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 22 Celsius
Power Cycle Min/Max Temperature: 20/23 Celsius
Lifetime Min/Max Temperature: 6/51 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (302)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

315
HDD/Fujitsu/MHZ2160/MHZ2160BH G2/2F52969F6247 Normal file
View File

@@ -0,0 +1,315 @@
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHZ BH
Device Model: FUJITSU MHZ2160BH G2
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 00000009
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Tue Jan 18 19:45:16 2022 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 224373
2 Throughput_Performance P-S--- 100 100 030 - 28901376
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 097 097 000 - 12454
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 2 (1998 2)
7 Seek_Error_Rate POSR-- 100 100 047 - 1821
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 066 066 000 - 17315
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 11247
192 Power-Off_Retract_Count -O--CK 100 100 000 - 109
193 Load_Cycle_Count -O--CK 096 096 000 - 87023
194 Temperature_Celsius -O---K 100 065 000 - 27 (Min/Max 10/67)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 89
196 Reallocated_Event_Count -O--CK 100 100 000 - 2 (1 6909)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 099 099 000 - 2
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 27869
203 Run_Out_Cancel -O---- 100 100 000 - 1533270950194
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 65282 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65282 [1] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 01 a1 00 ce 5f 40 00 Error: UNC 1 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 01 a1 00 ce 58 40 00 00:22:03.520 READ DMA EXT
25 00 00 00 08 00 01 a1 00 ce 58 40 00 00:21:58.830 READ DMA EXT
25 00 00 00 08 00 01 a1 00 ce 58 40 00 00:21:54.218 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:21:54.130 READ LOG EXT
60 00 08 00 f8 00 01 a1 00 ce 58 40 00 00:21:49.518 READ FPDMA QUEUED
Error 65281 [0] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 01 a1 00 ce 5f 40 00 Error: UNC 1 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 01 a1 00 ce 58 40 00 00:21:58.830 READ DMA EXT
25 00 00 00 08 00 01 a1 00 ce 58 40 00 00:21:54.218 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:21:54.130 READ LOG EXT
60 00 08 00 f8 00 01 a1 00 ce 58 40 00 00:21:49.518 READ FPDMA QUEUED
60 00 08 00 f0 00 01 a1 00 ce 50 40 00 00:21:49.518 READ FPDMA QUEUED
Error 65280 [255] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 01 a1 00 ce 5f 40 00 Error: UNC 1 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 01 a1 00 ce 58 40 00 00:21:54.218 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:21:54.130 READ LOG EXT
60 00 08 00 f8 00 01 a1 00 ce 58 40 00 00:21:49.518 READ FPDMA QUEUED
60 00 08 00 f0 00 01 a1 00 ce 50 40 00 00:21:49.518 READ FPDMA QUEUED
60 00 08 00 e8 00 01 a1 00 ce 48 40 00 00:21:49.517 READ FPDMA QUEUED
Error 65279 [254] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 fb 00 01 a1 00 ce 5f 40 00 Error: UNC at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 f8 00 01 a1 00 ce 58 40 00 00:21:49.518 READ FPDMA QUEUED
60 00 08 00 f0 00 01 a1 00 ce 50 40 00 00:21:49.518 READ FPDMA QUEUED
60 00 08 00 e8 00 01 a1 00 ce 48 40 00 00:21:49.517 READ FPDMA QUEUED
60 00 08 00 e0 00 01 a1 00 ce 40 40 00 00:21:49.517 READ FPDMA QUEUED
60 00 08 00 d8 00 01 a1 00 ce 38 40 00 00:21:49.517 READ FPDMA QUEUED
Error 65278 [253] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 71 00 01 a1 00 ce 5f 40 00 Error: UNC 369 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:44.841 READ DMA EXT
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:40.229 READ DMA EXT
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:35.542 READ DMA EXT
25 00 00 08 00 00 01 a2 00 ce d0 40 00 00:21:35.517 READ DMA EXT
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:30.904 READ DMA EXT
Error 65277 [252] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 71 00 01 a1 00 ce 5f 40 00 Error: UNC 369 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:40.229 READ DMA EXT
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:35.542 READ DMA EXT
25 00 00 08 00 00 01 a2 00 ce d0 40 00 00:21:35.517 READ DMA EXT
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:30.904 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:21:30.828 READ LOG EXT
Error 65276 [251] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 71 00 01 a1 00 ce 5f 40 00 Error: UNC 369 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:35.542 READ DMA EXT
25 00 00 08 00 00 01 a2 00 ce d0 40 00 00:21:35.517 READ DMA EXT
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:30.904 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:21:30.828 READ LOG EXT
60 08 00 00 d0 00 01 a2 00 ce d0 40 00 00:21:26.219 READ FPDMA QUEUED
Error 65275 [250] occurred at disk power-on lifetime: 17294 hours (720 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 71 00 01 a1 00 ce 5f 40 00 Error: UNC 369 sectors at LBA = 0x1a100ce5f = 6996151903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 70 00 01 a0 00 ce 60 40 00 00:21:30.904 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:21:30.828 READ LOG EXT
60 08 00 00 d0 00 01 a2 00 ce d0 40 00 00:21:26.219 READ FPDMA QUEUED
60 02 70 00 c8 00 01 a0 00 ce 60 40 00 00:21:26.219 READ FPDMA QUEUED
60 04 10 00 c0 00 01 9a 00 ce d0 40 00 00:21:26.204 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 21/27 Celsius
Lifetime Min/Max Temperature: 10/67 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (453)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

320
HDD/Fujitsu/MHZ2250/MHZ2250BH G1/B96B466E46F3 Normal file
View File

@@ -0,0 +1,320 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHZ BH
Device Model: FUJITSU MHZ2250BH G1
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0040020C
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3c
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Tue Aug 10 00:35:43 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1009) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 143) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 7158
2 Throughput_Performance P-S--- 100 100 030 - 46202880
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 098 098 000 - 6742
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 614
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 068 068 000 - 16159
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 6459
192 Power-Off_Retract_Count -O--CK 099 099 000 - 377
193 Load_Cycle_Count -O--CK 093 093 000 - 151646
194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 14/60)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6866)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 1
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 11016
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 31671
203 Run_Out_Cancel -O---- 092 090 000 - 395776628275
240 Head_Flying_Hours -OSRCK 200 193 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 12
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 [11] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 0b 00 06 af 00 b5 f5 40 00 Error: UNC 11 sectors at LBA = 0x6af00b5f5 = 28705863157
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 af 00 b5 e0 40 00 00:43:20.546 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 e0 40 00 00:43:15.378 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 c0 40 00 00:43:15.245 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 a0 40 00 00:43:15.245 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 80 40 00 00:43:13.221 READ DMA EXT
Error 11 [10] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 0b 00 06 af 00 b5 f5 40 00 Error: UNC 11 sectors at LBA = 0x6af00b5f5 = 28705863157
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 af 00 b5 e0 40 00 00:43:15.378 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 c0 40 00 00:43:15.245 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 a0 40 00 00:43:15.245 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 80 40 00 00:43:13.221 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 60 40 00 00:43:13.147 READ DMA EXT
Error 10 [9] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 06 af 00 b5 40 40 00 Error: UNC 32 sectors at LBA = 0x6af00b540 = 28705862976
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 af 00 b5 40 40 00 00:43:08.145 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 40 40 00 00:43:03.289 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 40 00 00:43:03.289 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:58.488 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:53.696 READ DMA EXT
Error 9 [8] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 06 af 00 b5 40 40 00 Error: UNC 32 sectors at LBA = 0x6af00b540 = 28705862976
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 af 00 b5 40 40 00 00:43:03.289 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 40 00 00:43:03.289 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:58.488 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:53.696 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 00 40 00 00:42:53.696 READ DMA EXT
Error 8 [7] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 02 00 06 af 00 b5 3e 40 00 Error: UNC 2 sectors at LBA = 0x6af00b53e = 28705862974
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:58.488 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:53.696 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 00 40 00 00:42:53.696 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 e0 40 00 00:42:52.573 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 c0 40 00 00:42:52.554 READ DMA EXT
Error 7 [6] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 02 00 06 af 00 b5 3e 40 00 Error: UNC 2 sectors at LBA = 0x6af00b53e = 28705862974
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 af 00 b5 20 40 00 00:42:53.696 READ DMA EXT
25 00 00 00 20 00 06 af 00 b5 00 40 00 00:42:53.696 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 e0 40 00 00:42:52.573 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 c0 40 00 00:42:52.554 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 40 00 00:42:52.554 READ DMA EXT
Error 6 [5] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 1b 00 06 ae 00 b5 a5 40 00 Error: UNC 27 sectors at LBA = 0x6ae00b5a5 = 28689085861
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 ae 00 b5 a0 40 00 00:42:47.731 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 a0 40 00 00:42:42.794 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 80 40 00 00:42:42.780 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 40 00 00:42:42.775 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 60 40 00 00:42:36.719 READ DMA EXT
Error 5 [4] occurred at disk power-on lifetime: 12657 hours (527 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 1b 00 06 ae 00 b5 a5 40 00 Error: UNC 27 sectors at LBA = 0x6ae00b5a5 = 28689085861
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 06 ae 00 b5 a0 40 00 00:42:42.794 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 80 40 00 00:42:42.780 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 40 00 00:42:42.775 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 60 40 00 00:42:36.719 READ DMA EXT
25 00 00 00 20 00 06 ae 00 b5 60 40 00 00:42:31.070 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 15835 -
# 2 Short offline Completed without error 00% 15835 -
# 3 Short offline Completed without error 00% 15835 -
# 4 Short offline Completed without error 00% 15834 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: --/35 Celsius
Lifetime Min/Max Temperature: --/60 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (453)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 28 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

173
HDD/Fujitsu/MJA2160/MJA2160BH G2/DD00EEA4C56F Normal file
View File

@@ -0,0 +1,173 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE i386] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MJA BH
Device Model: FUJITSU MJA2160BH G2
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 8919
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 8 15:28:36 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 508) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 72) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 046 - 250082
2 Throughput_Performance P-S--K 253 253 030 - 25296896
3 Spin_Up_Time PO---K 100 100 025 - 0
4 Start_Stop_Count -O--CK 099 099 000 - 4295
5 Reallocated_Sector_Ct PO--CK 253 253 024 - 0
7 Seek_Error_Rate POSR-K 100 100 047 - 371
8 Seek_Time_Performance P-S--K 253 253 019 - 0
9 Power_On_Hours -O--CK 079 079 000 - 10572
10 Spin_Retry_Count PO--CK 253 253 020 - 0
11 Calibration_Retry_Count -O--CK 253 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3958
180 Unknown_HDD_Attribute POSR-K 100 100 098 - 0
182 Unknown_HDD_Attribute -O--CK 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
184 End-to-End_Error PO--CK 253 253 097 - 0
185 Unknown_Attribute ----CK 253 253 000 - 0
186 Unknown_Attribute -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 099 000 - 4
189 High_Fly_Writes -O-RCK 253 100 000 - 0
190 Airflow_Temperature_Cel -O---K 064 047 045 - 36 (Min/Max 36/37)
191 G-Sense_Error_Rate -O--CK 253 099 000 - 16580610
192 Power-Off_Retract_Count -O--CK 099 099 000 - 21037377
193 Load_Cycle_Count -O--CK 087 087 000 - 268179
195 Hardware_ECC_Recovered -O-RCK 253 253 000 - 1874
196 Reallocated_Event_Count -O--CK 253 253 000 - 0
197 Current_Pending_Sector -O--CK 253 253 000 - 0
198 Offline_Uncorrectable ----CK 253 253 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 38/39 Celsius
Lifetime Min/Max Temperature: 18/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (337)
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

315
HDD/Fujitsu/MJA2320/MJA2320BH G2/4B4EEB8D9827 Normal file
View File

@@ -0,0 +1,315 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MJA BH
Device Model: FUJITSU MJA2320BH G2
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 00000018
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Aug 2 00:05:17 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1009) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 143) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 208985
2 Throughput_Performance P-S--- 100 100 030 - 48103424
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 900
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2100 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 1356
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 071 071 000 - 14640
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 804
192 Power-Off_Retract_Count -O--CK 100 100 000 - 131
193 Load_Cycle_Count -O--CK 097 097 000 - 67394
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 9/53)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 15240
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 15834)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 16
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 3353
203 Run_Out_Cancel -O---- 100 100 000 - 2628666523301
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 16
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16 [15] occurred at disk power-on lifetime: 4308 hours (179 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 30 00 00 00 00 b2 02 40 00 Error: ICRC, ABRT 48 sectors at LBA = 0x0000b202 = 45570
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 70 00 00 00 00 b1 c2 40 00 00:00:34.956 READ DMA EXT
25 00 00 00 80 00 00 00 00 b1 42 40 00 00:00:34.954 READ DMA EXT
25 00 00 00 01 00 00 00 00 b1 41 40 00 00:00:34.954 READ DMA EXT
25 00 00 00 01 00 00 00 00 b1 40 40 00 00:00:34.954 READ DMA EXT
25 00 00 00 08 00 00 00 00 b1 38 40 00 00:00:34.953 READ DMA EXT
Error 15 [14] occurred at disk power-on lifetime: 4304 hours (179 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 0e 00 00 00 a3 36 f2 42 00 Error: ICRC, ABRT 14 sectors at LBA = 0x02a336f2 = 44250866
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 3e 00 00 02 a3 36 c2 42 00 00:01:35.113 READ DMA EXT
25 00 00 00 01 00 00 02 a3 36 c1 42 00 00:01:35.112 READ DMA EXT
25 00 00 00 01 00 00 02 a3 36 c0 42 00 00:01:35.102 READ DMA EXT
25 00 00 00 3e 00 00 00 02 5d 02 40 00 00:01:35.101 READ DMA EXT
25 00 00 00 01 00 00 00 02 5d 01 40 00 00:01:35.100 READ DMA EXT
Error 14 [13] occurred at disk power-on lifetime: 4265 hours (177 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 d0 00 00 00 00 08 63 40 00 Error: ICRC, ABRT 208 sectors at LBA = 0x00000863 = 2147
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 00 08 43 40 00 00:00:34.473 READ DMA EXT
25 00 00 00 01 00 00 00 00 08 42 40 00 00:00:34.472 READ DMA EXT
25 00 00 00 01 00 00 00 00 08 41 40 00 00:00:34.472 READ DMA EXT
25 00 00 00 3e 00 00 00 02 5c c2 40 00 00:00:30.378 READ DMA EXT
25 00 00 00 01 00 00 00 02 5c c1 40 00 00:00:30.377 READ DMA EXT
Error 13 [12] occurred at disk power-on lifetime: 4240 hours (176 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 2e 00 00 00 02 5d 12 40 00 Error: ICRC, ABRT 46 sectors at LBA = 0x00025d12 = 154898
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 3e 00 00 00 02 5d 02 40 00 00:06:57.656 READ DMA EXT
25 00 00 00 01 00 00 00 02 5d 01 40 00 00:06:57.655 READ DMA EXT
25 00 00 00 01 00 00 00 02 5d 00 40 00 00:06:57.642 READ DMA EXT
25 00 00 00 01 00 00 00 00 4d 6e 40 00 00:06:57.636 READ DMA EXT
25 00 00 00 01 00 00 00 00 33 a9 40 00 00:06:57.630 READ DMA EXT
Error 12 [11] occurred at disk power-on lifetime: 4218 hours (175 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 dc 00 00 00 55 49 14 44 00 Error: ICRC, ABRT 220 sectors at LBA = 0x04554914 = 72698132
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 00 00 f0 00 00 14 55 49 00 44 00 00:01:37.129 WRITE DMA EXT
35 03 00 00 40 00 00 14 55 48 c0 44 00 00:01:37.127 WRITE DMA EXT
35 03 00 00 01 00 00 00 02 5c c0 40 00 00:01:37.127 WRITE DMA EXT
35 03 00 00 06 00 00 00 01 d5 17 40 00 00:01:37.126 WRITE DMA EXT
35 03 00 00 06 00 00 00 00 aa d7 40 00 00:01:37.126 WRITE DMA EXT
Error 11 [10] occurred at disk power-on lifetime: 4202 hours (175 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 10 00 00 00 fb 57 90 40 00 Error: ICRC, ABRT 16 sectors at LBA = 0x00fb5790 = 16471952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 03 03 00 40 00 00 00 fb 57 60 40 00 00:04:46.837 READ DMA EXT
25 03 03 00 f0 00 00 00 fb 56 70 40 00 00:04:46.833 READ DMA EXT
25 03 03 00 f0 00 00 00 fb 55 80 40 00 00:04:46.829 READ DMA EXT
25 03 03 00 f0 00 00 00 fb 54 90 40 00 00:04:46.825 READ DMA EXT
25 03 03 00 f0 00 00 00 fb 53 a0 40 00 00:04:46.821 READ DMA EXT
Error 10 [9] occurred at disk power-on lifetime: 4196 hours (174 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 9a 00 00 00 08 c8 56 40 00 Error: ICRC, ABRT 154 sectors at LBA = 0x0008c856 = 575574
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 03 03 00 f0 00 00 00 08 c8 00 40 00 01:01:26.624 WRITE DMA EXT
35 03 03 00 08 00 00 22 84 08 78 62 00 01:01:26.622 WRITE DMA EXT
35 03 03 00 10 00 00 00 80 a8 f0 40 00 01:01:25.080 WRITE DMA EXT
35 03 03 00 f0 00 00 00 80 a8 00 40 00 01:01:25.074 WRITE DMA EXT
35 03 03 00 f0 00 00 00 80 a7 10 40 00 01:01:25.067 WRITE DMA EXT
Error 9 [8] occurred at disk power-on lifetime: 551 hours (22 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 24 61 4a e0 00 Error: ICRC, ABRT at LBA = 0x0024614a = 2384202
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 03 00 80 00 00 13 24 60 cb e0 00 00:08:26.487 READ DMA EXT
25 00 03 00 80 00 00 13 24 60 4b e0 00 00:08:26.485 READ DMA EXT
25 00 03 00 80 00 00 13 24 5f cb e0 00 00:08:26.483 READ DMA EXT
25 00 03 00 80 00 00 13 24 5f 4b e0 00 00:08:26.481 READ DMA EXT
25 00 03 00 80 00 00 13 24 5e cb e0 00 00:08:26.479 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 33/34 Celsius
Lifetime Min/Max Temperature: 9/53 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (310)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

25
HDD/Fujitsu/README.md
View File

@@ -21,21 +21,27 @@ Days — avg. days per sample,
Err — avg. errors per sample,
MTBF — avg. MTBF in years per sample.
| MFG | Model | Size | Samples | Days | Err | MTBF |
|-----------|--------------------|--------|---------|-------|-------|--------|
| MFG | Model | Size | Samples | Days | Err | MTBF |
|-----------|--------------------|--------|---------|-------|-------|------|
| Fujitsu | MJA2160BH FFS G1 | 160 GB | 1 | 707 | 0 | 1.94 |
| Fujitsu | MHW2120BH | 120 GB | 1 | 641 | 0 | 1.76 |
| Fujitsu | MJA2160BH G2 | 160 GB | 1 | 633 | 0 | 1.74 |
| Fujitsu | MHV2100BH PL | 100 GB | 1 | 553 | 0 | 1.52 |
| Fujitsu | MJA2160BH G2 | 160 GB | 2 | 537 | 0 | 1.47 |
| Fujitsu | MHY2120BH | 120 GB | 2 | 456 | 0 | 1.25 |
| Fujitsu | MHT2080AH | 80 GB | 1 | 427 | 0 | 1.17 |
| Fujitsu | MJA2320BH G2 | 320 GB | 2 | 396 | 0 | 1.09 |
| Fujitsu | MHZ2120BH G2 | 120 GB | 1 | 357 | 0 | 0.98 |
| Fujitsu | MJA2250BH FFS G1 | 250 GB | 1 | 302 | 0 | 0.83 |
| Fujitsu | MHY2250BH | 250 GB | 1 | 253 | 0 | 0.69 |
| Fujitsu | MHT2080BH | 80 GB | 1 | 241 | 0 | 0.66 |
| Fujitsu | MHY2160BH | 160 GB | 1 | 206 | 0 | 0.57 |
| Fujitsu | MHZ2320BH FFS G1 | 320 GB | 1 | 203 | 0 | 0.56 |
| Fujitsu | MJA2320BH G2 | 320 GB | 1 | 183 | 0 | 0.50 |
| Fujitsu | MJA2250BH G2 | 250 GB | 1 | 161 | 0 | 0.44 |
| Fujitsu | MHZ2250BH G1 | 250 GB | 1 | 673 | 9 | 0.18 |
| Fujitsu | MHZ2160BH G2 | 160 GB | 1 | 721 | 14 | 0.13 |
| Fujitsu | MHS2040AT D | 40 GB | 1 | 1334 | 37 | 0.10 |
| Fujitsu | MHW2160BH | 160 GB | 1 | 475 | 957 | 0.00 |
| Fujitsu | MHV2120BH PL | 120 GB | 1 | 0 | 0 | 0.00 |
HDD by Family
-------------
@@ -48,11 +54,12 @@ Days — avg. days per sample,
Err — avg. errors per sample,
MTBF — avg. MTBF in years per sample.
| MFG | Family | Models | Samples | Days | Err | MTBF |
|-----------|------------------------|--------|---------|-------|-------|--------|
| Fujitsu | MHY BH | 1 | 2 | 456 | 0 | 1.25 |
| Fujitsu | MJA BH | 5 | 5 | 397 | 0 | 1.09 |
| MFG | Family | Models | Samples | Days | Err | MTBF |
|-----------|------------------------|--------|---------|-------|-------|------|
| Fujitsu | MJA BH | 5 | 7 | 434 | 0 | 1.19 |
| Fujitsu | MHY BH | 3 | 4 | 343 | 0 | 0.94 |
| Fujitsu | MHT | 2 | 2 | 334 | 0 | 0.92 |
| Fujitsu | MHW BH | 2 | 2 | 558 | 479 | 0.88 |
| Fujitsu | MHZ BH | 2 | 2 | 280 | 0 | 0.77 |
| Fujitsu | MHV | 2 | 2 | 276 | 0 | 0.76 |
| Fujitsu | MHZ BH | 4 | 4 | 488 | 6 | 0.46 |
| Fujitsu | MHS AT | 1 | 1 | 1334 | 37 | 0.10 |