80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 3637, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2022-03-18 23:39:11 +03:00
parent 9495463568
commit b1c41e7edc
3830 changed files with 648855 additions and 4579 deletions
Download Patch File Download Diff File Expand all files Collapse all files

327
HDD/Samsung/HD322/HD322HJ/3692FCAA3329 Normal file
View File

@@ -0,0 +1,327 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p16-HBSD amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AG01113
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Thu Jun 10 20:48:49 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 17) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 4525) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 76) minutes.
Conveyance self-test routine
recommended polling time: ( 9) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 092 092 011 - 3480
4 Start_Stop_Count -O--CK 090 090 000 - 9970
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 11298
9 Power_On_Hours -O--CK 098 098 000 - 11846
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 46
12 Power_Cycle_Count -O--CK 094 094 000 - 5642
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 5
184 End-to-End_Error PO--CK 001 001 000 - 225
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 072 063 000 - 28 (Min/Max 27/28)
194 Temperature_Celsius -O---K 071 059 000 - 29 (Min/Max 26/29)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 71017
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 62
200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 2 Write stream error log
0x22 GPL R/O 2 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 73 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 73 [0] occurred at disk power-on lifetime: 11503 hours (479 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 00 06 c7 28 40 00 00:50:35.470 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 06 c6 28 40 00 00:50:35.470 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 06 c5 28 40 00 00:50:35.470 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 06 c4 28 40 00 00:50:35.470 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 06 c3 28 40 00 00:50:35.470 READ FPDMA QUEUED
Error 72 [7] occurred at disk power-on lifetime: 10061 hours (419 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 00 00 00 01 40 00 01:49:53.220 READ FPDMA QUEUED
60 00 00 00 01 00 00 00 00 00 00 40 00 01:49:53.200 READ FPDMA QUEUED
ef 00 02 00 00 00 00 00 00 00 00 a0 00 01:49:53.200 SET FEATURES [Enable write cache]
f5 00 00 00 00 00 00 00 00 00 00 a0 00 01:49:53.200 SECURITY FREEZE LOCK
ef 00 66 00 00 00 00 00 00 00 00 a0 00 01:49:53.200 SET FEATURES [Disable revert defaults]
Error 71 [6] occurred at disk power-on lifetime: 5227 hours (217 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 01 00 00 00 00 00 00 e0 00 01:20:12.660 READ DMA
ef 00 03 00 42 00 00 00 00 00 00 a0 00 01:20:12.650 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:20:12.640 IDENTIFY DEVICE
00 00 00 00 01 00 00 00 00 00 01 a0 00 01:20:12.480 NOP [Abort queued commands]
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:20:12.080 NOP [Abort queued commands]
Error 70 [5] occurred at disk power-on lifetime: 4451 hours (185 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 01 00 00 00 00 00 00 e0 00 02:04:05.720 READ DMA
ef 00 03 00 42 00 00 00 00 00 00 a0 00 02:04:05.710 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 02:04:05.700 IDENTIFY DEVICE
00 00 00 00 01 00 00 00 00 00 01 a0 00 02:04:05.540 NOP [Abort queued commands]
00 00 00 00 01 00 00 00 00 00 01 a0 ff 02:04:05.130 NOP [Abort queued commands]
Error 69 [4] occurred at disk power-on lifetime: 4450 hours (185 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 01 00 00 00 00 00 00 e0 00 01:25:56.740 READ DMA
ef 00 03 00 42 00 00 00 00 00 00 a0 00 01:25:56.730 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:25:56.720 IDENTIFY DEVICE
00 00 00 00 01 00 00 00 00 00 01 a0 08 01:25:56.560 NOP [Abort queued commands]
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:25:56.160 NOP [Abort queued commands]
Error 68 [3] occurred at disk power-on lifetime: 4449 hours (185 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 01 00 00 00 00 00 00 e0 00 01:49:52.420 READ DMA
ef 00 03 00 42 00 00 00 00 00 00 a0 00 01:49:52.410 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:49:52.400 IDENTIFY DEVICE
00 00 00 00 01 00 00 00 00 00 01 a0 00 01:49:52.250 NOP [Abort queued commands]
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:49:51.850 NOP [Abort queued commands]
Error 67 [2] occurred at disk power-on lifetime: 4449 hours (185 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 01 00 00 00 00 00 00 e0 00 01:46:32.950 READ DMA
ef 00 03 00 42 00 00 00 00 00 00 a0 00 01:46:32.940 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:46:32.930 IDENTIFY DEVICE
00 00 00 00 01 00 00 00 00 00 01 a0 08 01:46:32.770 NOP [Abort queued commands]
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:46:32.370 NOP [Abort queued commands]
Error 66 [1] occurred at disk power-on lifetime: 4262 hours (177 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- c0 02 10 00 00 01 15 a1 f0 40 00 at LBA = 0x0115a1f0 = 18194928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 04 00 00 00 00 16 18 00 40 00 04:54:08.930 WRITE FPDMA QUEUED
61 00 00 04 00 00 00 00 16 14 00 40 00 04:54:08.930 WRITE FPDMA QUEUED
61 00 00 04 00 00 00 00 16 10 00 40 00 04:54:08.920 WRITE FPDMA QUEUED
61 00 00 04 00 00 00 00 16 0c 00 40 00 04:54:08.920 WRITE FPDMA QUEUED
61 00 00 04 00 00 00 00 16 08 00 40 00 04:54:08.920 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 10% 3139 -
# 2 Short offline Completed without error 00% 8574 -
# 3 Short offline Completed without error 00% 8574 -
# 4 Short offline Aborted by host 60% 3261 -
# 5 Short offline Aborted by host 60% 3257 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: --/30 Celsius
Lifetime Min/Max Temperature: --/41 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (78)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

338
HDD/Samsung/HD322/HD322HJ/57202F77574C Normal file
View File

@@ -0,0 +1,338 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Thu Oct 7 19:31:09 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3839) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 65) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 099 051 - 0
3 Spin_Up_Time POS--- 092 092 011 - 3280
4 Start_Stop_Count -O--CK 090 090 000 - 10184
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 9681
9 Power_On_Hours -O--CK 093 093 000 - 34545
10 Spin_Retry_Count PO--CK 100 100 051 - 1
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 091 091 000 - 9097
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 1
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 1
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 069 054 000 - 31 (Min/Max 25/31)
194 Temperature_Celsius -O---K 068 052 000 - 32 (Min/Max 25/33)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 287515
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 845
200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 845 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 845 [4] occurred at disk power-on lifetime: 30564 hours (1273 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 53 00 ff 00 00 04 13 39 e7 44 00 Error: ICRC, ABRT at LBA = 0x041339e7 = 68368871
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 40 00 00 00 26 ca 28 40 00 00:44:38.880 READ FPDMA QUEUED
ca 00 00 00 30 00 00 00 13 39 b8 44 08 00:44:38.860 WRITE DMA
60 00 00 00 40 00 00 00 13 39 68 40 00 00:44:38.860 READ FPDMA QUEUED
60 00 00 00 40 00 00 00 26 c9 e8 40 00 00:44:38.850 READ FPDMA QUEUED
60 00 00 00 40 00 00 00 26 c9 a8 40 00 00:44:38.820 READ FPDMA QUEUED
Error 844 [3] occurred at disk power-on lifetime: 30564 hours (1273 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 fe 00 00 04 f7 c2 7f 44 00 Error: ICRC, ABRT at LBA = 0x04f7c27f = 83346047
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 40 00 00 00 80 b7 40 40 00 00:39:22.380 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 6d 26 c0 40 00 00:39:22.380 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 6d 26 80 40 00 00:39:22.380 WRITE FPDMA QUEUED
ca 00 00 00 30 00 00 00 f7 c2 50 44 08 00:39:22.380 WRITE DMA
ef 00 02 00 00 00 00 00 00 00 00 40 08 00:39:22.380 SET FEATURES [Enable write cache]
Error 843 [2] occurred at disk power-on lifetime: 30564 hours (1273 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 40 00 00 00 10 46 00 40 00 00:38:52.070 READ FPDMA QUEUED
ca 00 00 00 2f 00 00 00 fc b5 92 41 08 00:38:52.060 WRITE DMA
60 00 00 00 40 00 00 00 fc b5 40 40 00 00:38:52.060 READ FPDMA QUEUED
61 00 00 01 00 00 00 00 fe 2a c0 40 00 00:38:52.050 WRITE FPDMA QUEUED
61 00 00 01 00 00 00 00 fe 29 80 40 00 00:38:52.050 WRITE FPDMA QUEUED
Error 842 [1] occurred at disk power-on lifetime: 30563 hours (1273 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 20 00 00 00 14 2f 08 40 00 04:48:15.740 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 00 14 2f 00 40 00 04:48:15.740 WRITE FPDMA QUEUED
ca 00 00 00 01 00 00 00 01 9f 47 40 00 04:48:15.740 WRITE DMA
c6 00 00 00 10 00 00 00 00 00 00 40 00 04:48:15.740 SET MULTIPLE MODE
ef 00 10 00 02 00 00 00 00 00 00 40 00 04:48:15.740 SET FEATURES [Enable SATA feature]
Error 841 [0] occurred at disk power-on lifetime: 30563 hours (1273 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 01 00 00 00 01 9f 47 40 00 at LBA = 0x00019f47 = 106311
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 28 00 00 00 49 4e 00 40 00 04:47:45.620 WRITE FPDMA QUEUED
61 00 00 00 30 00 00 00 49 4e 40 40 00 04:47:45.620 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 00 49 28 78 40 00 04:47:45.620 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 49 4e 80 40 00 04:47:45.620 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 00 49 4e c0 40 00 04:47:45.620 WRITE FPDMA QUEUED
Error 840 [7] occurred at disk power-on lifetime: 30563 hours (1273 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 40 00 00 00 00 01 80 40 00 04:47:15.510 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 00 00 00 c0 40 00 04:47:15.510 WRITE FPDMA QUEUED
ca 00 00 00 01 00 00 00 00 9e 47 40 00 04:47:15.510 WRITE DMA
c6 00 00 00 10 00 00 00 00 00 00 40 00 04:47:15.510 SET MULTIPLE MODE
ef 00 10 00 02 00 00 00 00 00 00 40 00 04:47:15.510 SET FEATURES [Enable SATA feature]
Error 839 [6] occurred at disk power-on lifetime: 30563 hours (1273 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 01 00 00 00 00 9e 47 40 00 at LBA = 0x00009e47 = 40519
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 01 00 00 00 00 3c 2c 40 40 00 04:46:45.390 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 3b 75 00 40 00 04:46:45.390 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 3b 6f 80 40 00 04:46:45.390 WRITE FPDMA QUEUED
61 00 00 00 01 00 00 00 00 a3 b7 40 00 04:46:45.390 WRITE FPDMA QUEUED
61 00 00 00 28 00 00 00 49 55 40 40 00 04:46:45.390 WRITE FPDMA QUEUED
Error 838 [5] occurred at disk power-on lifetime: 30563 hours (1273 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 01 00 00 00 00 a3 b7 40 00 04:46:15.270 WRITE FPDMA QUEUED
61 00 00 00 28 00 00 00 49 55 40 40 00 04:46:15.270 WRITE FPDMA QUEUED
ca 00 00 00 2f 00 00 00 47 ac 12 44 08 04:46:15.270 WRITE DMA
61 00 00 00 40 00 00 00 47 ab c0 40 00 04:46:15.270 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 00 47 ab 40 40 00 04:46:15.270 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 33391 -
# 2 Short offline Completed without error 00% 31759 -
# 3 Short offline Completed without error 00% 31745 -
# 4 Short offline Completed without error 00% 31731 -
# 5 Short offline Completed without error 00% 30845 -
# 6 Short offline Completed without error 00% 28408 -
# 7 Short offline Completed without error 00% 27797 -
# 8 Short offline Completed without error 00% 27153 -
# 9 Short offline Completed without error 00% 27142 -
#10 Short offline Completed without error 00% 24355 -
#11 Short offline Completed without error 00% 24342 -
#12 Extended offline Completed without error 00% 17062 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: --/33 Celsius
Lifetime Min/Max Temperature: --/49 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (28)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 30 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

205
HDD/Samsung/HD322/HD322HJ/86BEA870D66D Normal file
View File

@@ -0,0 +1,205 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Fri Sep 24 14:39:16 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 67) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 092 092 011 - 3460
4 Start_Stop_Count -O--CK 097 097 000 - 2925
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 099 099 000 - 6624
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 37
12 Power_Cycle_Count -O--CK 098 098 000 - 2264
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 064 057 000 - 36 (Min/Max 24/36)
194 Temperature_Celsius -O---K 064 057 000 - 36 (Min/Max 24/38)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 179869
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1
200 Multi_Zone_Error_Rate -O-R-- 100 096 000 - 60
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 670 hours (27 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 53 00 37 00 00 02 19 e7 ed e0 00 Error: ICRC, ABRT 55 sectors at LBA = 0x0219e7ed = 35252205
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 48 00 00 02 19 e7 dc e0 00 00:05:16.360 WRITE DMA EXT
35 00 00 00 01 00 00 02 06 81 74 e0 00 00:05:16.360 WRITE DMA EXT
35 00 00 00 01 00 00 02 06 81 71 e0 00 00:05:16.360 WRITE DMA EXT
35 00 00 00 01 00 00 02 1f 96 54 e0 00 00:05:16.360 WRITE DMA EXT
35 00 00 00 01 00 00 02 05 a6 31 e0 00 00:05:16.360 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: --/38 Celsius
Lifetime Min/Max Temperature: --/44 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (96)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 90 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 94 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

298
HDD/Samsung/HD322/HD322HJ/A67246FF431F Normal file
View File

@@ -0,0 +1,298 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Sun Oct 17 17:00:27 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4070) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 69) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 092 092 011 - 3250
4 Start_Stop_Count -O--CK 098 098 000 - 2270
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 253 253 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 099 099 000 - 2831
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2179
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 025 025 000 - 75
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 057 057 000 - 43 (Min/Max 43/43)
194 Temperature_Celsius -O---K 057 056 000 - 43 (Min/Max 43/43)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1620
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 174
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 175 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 175 [6] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d2 00 01 00 00 00 5d c1 6f e0 00 1 sectors at LBA = 0x005dc16f = 6144367
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 01 00 00 00 5d c1 6f e0 00 02:58:11.720 WRITE DMA EXT
Error 174 [5] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d2 00 01 00 00 00 5d c1 6f e0 00 1 sectors at LBA = 0x005dc16f = 6144367
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 f3 00 00 00 5d c0 7e e0 00 02:58:11.720 WRITE DMA EXT
Error 173 [4] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 01 00 00 00 00 5d c0 70 e0 00 at LBA = 0x005dc070 = 6144112
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
39 00 00 00 fb 00 00 00 5d c3 75 e0 00 02:58:11.720 WRITE MULTIPLE EXT
Error 172 [3] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 fb 00 00 00 5d c3 75 e0 00 Error: ABRT at LBA = 0x005dc375 = 6144885
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
39 00 00 01 00 00 00 00 5d c3 70 e0 00 02:58:11.710 WRITE MULTIPLE EXT
Error 171 [2] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 01 00 00 00 00 5d c3 70 e0 00 256 sectors at LBA = 0x005dc370 = 6144880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 f0 00 00 00 5d c5 81 e0 00 02:58:11.710 WRITE DMA EXT
35 00 00 00 f0 00 00 00 5d c4 80 e0 00 02:58:11.710 WRITE DMA EXT
c6 00 00 00 10 00 00 00 00 00 00 a0 00 02:58:10.760 SET MULTIPLE MODE
ef 00 03 00 45 00 00 00 00 00 00 a0 00 02:58:10.740 SET FEATURES [Set transfer mode]
ef 00 03 00 0c 00 00 00 00 00 00 a0 00 02:58:10.730 SET FEATURES [Set transfer mode]
Error 170 [1] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d2 00 01 00 00 00 5d c4 6f e0 00 1 sectors at LBA = 0x005dc46f = 6145135
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 01 00 00 00 5d c4 6f e0 00 02:57:09.810 WRITE DMA EXT
Error 169 [0] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d2 00 01 00 00 00 5d c4 6f e0 00 1 sectors at LBA = 0x005dc46f = 6145135
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 f2 00 00 00 5d c3 7f e0 00 02:57:09.810 WRITE DMA EXT
Error 168 [7] occurred at disk power-on lifetime: 1309 hours (54 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 01 00 00 00 00 5d c3 70 e0 00 256 sectors at LBA = 0x005dc370 = 6144880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 f3 00 00 00 5d c2 7d e0 00 02:57:09.810 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: --/43 Celsius
Lifetime Min/Max Temperature: --/44 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (48)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

324
HDD/Samsung/HD322/HD322HJ/FDDAB28CEE27 Normal file
View File

@@ -0,0 +1,324 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 320,071,851,520 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Sun Jan 2 18:52:06 2022 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3991) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 67) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 092 092 011 - 3240
4 Start_Stop_Count -O--CK 097 097 000 - 2948
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 099 099 000 - 7028
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 2
12 Power_Cycle_Count -O--CK 097 097 000 - 2897
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 6
184 End-to-End_Error PO--CK 001 001 000 - 300
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 078 052 000 - 22 (Min/Max 22/22)
194 Temperature_Celsius -O---K 075 051 000 - 25 (Min/Max 22/25)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 29553
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 099 044 000 - 45614
200 Multi_Zone_Error_Rate -O-R-- 099 081 000 - 662
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 45631 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45631 [6] occurred at disk power-on lifetime: 7013 hours (292 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 7f 00 00 04 83 23 77 e0 00 127 sectors at LBA = 0x04832377 = 75703159
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 7f 00 00 04 83 23 77 e0 00 00:00:10.870 READ DMA EXT
25 20 20 00 21 00 00 04 83 23 56 e0 00 00:00:10.870 READ DMA EXT
25 20 20 00 7f 00 00 04 83 22 d7 e0 00 00:00:10.870 READ DMA EXT
25 20 20 00 7f 00 00 04 83 22 58 e0 00 00:00:10.860 READ DMA EXT
25 20 20 00 7f 00 00 04 83 21 d9 e0 00 00:00:10.860 READ DMA EXT
Error 45630 [5] occurred at disk power-on lifetime: 7013 hours (292 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 7f 00 00 02 71 46 86 e0 00 127 sectors at LBA = 0x02714686 = 40978054
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 7f 00 00 02 71 47 84 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 7f 00 00 02 71 47 05 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 7f 00 00 02 71 46 86 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 03 00 00 02 71 46 83 e0 00 00:00:10.220 READ DMA EXT
25 20 20 00 03 00 00 02 71 46 80 e0 00 00:00:10.220 READ DMA EXT
Error 45629 [4] occurred at disk power-on lifetime: 7013 hours (292 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 7f 00 00 04 62 16 c8 e0 00 127 sectors at LBA = 0x046216c8 = 73537224
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 7f 00 00 04 62 1b 3f e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 1a c0 e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 1a 41 e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 19 c2 e0 00 00:00:09.880 READ DMA EXT
25 20 20 00 7f 00 00 04 62 19 43 e0 00 00:00:09.880 READ DMA EXT
Error 45628 [3] occurred at disk power-on lifetime: 6970 hours (290 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 db 00 00 00 20 53 ad e0 00 219 sectors at LBA = 0x002053ad = 2118573
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ed 00 00 00 20 52 9b e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 ec 00 00 00 20 51 9c e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 ec 00 00 00 20 50 9c e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 f0 00 00 00 20 4f 99 e0 00 00:31:32.100 WRITE DMA EXT
35 00 00 00 ed 00 00 00 20 4e 9b e0 00 00:31:32.100 WRITE DMA EXT
Error 45627 [2] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 b8 00 00 05 ff 91 f0 e0 00 184 sectors at LBA = 0x05ff91f0 = 100635120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ee 00 00 05 ff 90 d2 e0 00 00:11:51.970 WRITE DMA EXT
35 00 00 00 ef 00 00 05 ff 8f d1 e0 00 00:11:51.970 WRITE DMA EXT
35 00 00 00 ef 00 00 05 ff 8e d1 e0 00 00:11:51.960 WRITE DMA EXT
35 00 00 00 ee 00 00 05 ff 8d d2 e0 00 00:11:51.960 WRITE DMA EXT
35 00 00 00 ef 00 00 05 ff 8c d1 e0 00 00:11:51.960 WRITE DMA EXT
Error 45626 [1] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 8b 00 00 05 c5 70 75 e0 00 139 sectors at LBA = 0x05c57075 = 96825461
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ee 00 00 05 c5 6f 33 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 ee 00 00 05 c5 6e 33 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 ed 00 00 05 c5 6d 34 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 ea 00 00 05 c5 6c 37 e0 00 00:01:54.620 WRITE DMA EXT
35 00 00 00 06 00 00 05 b9 c7 9b e0 00 00:01:54.620 WRITE DMA EXT
Error 45625 [0] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 91 00 00 05 c4 7d 6f e0 00 145 sectors at LBA = 0x05c47d6f = 96763247
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 f4 00 00 05 c4 7c 0c e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 ed 00 00 05 c4 7b 13 e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 0e 00 00 0e 00 e8 b2 e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 0f 00 00 0e 00 e8 b1 e0 00 00:01:50.420 WRITE DMA EXT
35 00 00 00 d0 00 00 0e 05 30 31 e0 00 00:01:50.420 WRITE DMA EXT
Error 45624 [7] occurred at disk power-on lifetime: 6969 hours (290 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d2 00 01 00 00 05 c2 98 37 e0 00 1 sectors at LBA = 0x05c29837 = 96639031
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 ef 00 00 05 c2 96 49 e0 00 00:01:19.210 WRITE DMA EXT
35 00 00 00 e7 00 00 05 c2 95 51 e0 00 00:01:19.210 WRITE DMA EXT
35 00 00 00 01 00 00 00 5b d5 e7 e0 00 00:01:19.210 WRITE DMA EXT
35 00 00 00 07 00 00 00 5d 6e 01 e0 00 00:01:19.210 WRITE DMA EXT
25 00 00 00 40 00 00 04 4d 8b d8 e0 00 00:01:18.810 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: --/25 Celsius
Lifetime Min/Max Temperature: --/50 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (75)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC