mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
Andrey Ponomarenko
106
HDD/Samsung/HM321/HM321HI/9DA1A7D57632
Normal file
106
HDD/Samsung/HM321/HM321HI/9DA1A7D57632
Normal file
@@ -0,0 +1,106 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint M7E (AF)
|
||||
Device Model: SAMSUNG HM321HI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 2AJ10001
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Tue Feb 1 12:07:50 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 25) The self-test routine was aborted by
|
||||
the host.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4800) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 8
|
||||
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
|
||||
3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3408
|
||||
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 431
|
||||
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
|
||||
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
|
||||
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
|
||||
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 177
|
||||
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
|
||||
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 588
|
||||
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 432
|
||||
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 600
|
||||
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 23 (Min/Max 17/38)
|
||||
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
|
||||
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 11
|
||||
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 26
|
||||
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 588
|
||||
225 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 11406
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Aborted by host 90% 0 -
|
||||
# 2 Short offline Completed without error 00% 0 -
|
||||
# 3 Extended offline Aborted by host 90% 0 -
|
||||
# 4 Short offline Aborted by host 80% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Aborted_by_host [90% left] (0-65535)
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user