mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
156
HDD/Seagate/ST9120/ST9120821AS/224F7AB471F2
Normal file
156
HDD/Seagate/ST9120/ST9120821AS/224F7AB471F2
Normal file
@@ -0,0 +1,156 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 5400.2
|
||||
Device Model: ST9120821AS
|
||||
Serial Number: --
|
||||
Firmware Version: 7.24
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Sat Jan 22 15:46:05 2022 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 426) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 68) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 111 099 006 - 30778418
|
||||
3 Spin_Up_Time -O---- 095 094 000 - 0
|
||||
4 Start_Stop_Count PO--CK 099 099 020 - 2005
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 082 060 030 - 193211583
|
||||
9 Power_On_Hours -O--CK 088 088 000 - 10703
|
||||
10 Spin_Retry_Count PO--C- 100 100 034 - 0
|
||||
12 Power_Cycle_Count PO--CK 098 098 020 - 2301
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 078 078 000 - 22
|
||||
190 Airflow_Temperature_Cel -O---K 068 041 045 Past 32 (2 87 32 30 0)
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1424
|
||||
193 Load_Cycle_Count -O--CK 018 018 000 - 165292
|
||||
194 Temperature_Celsius -O---K 032 059 000 - 32 (0 11 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 063 046 000 - 27955440
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 SL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 SL R/O 1 NCQ Command Error log
|
||||
0x11 SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 SL R/O 1 Write stream error log
|
||||
0x22 SL R/O 1 Read stream error log
|
||||
0x23 SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xa0 SL VS 1 Device vendor specific log
|
||||
0xa1 SL VS 20 Device vendor specific log
|
||||
0xa2 SL VS 101 Device vendor specific log
|
||||
0xa8 SL VS 20 Device vendor specific log
|
||||
0xa9 SL VS 1 Device vendor specific log
|
||||
0xe0 SL R/W 1 SCT Command/Status
|
||||
0xe1 SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 521 (0x0209)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 32 Celsius
|
||||
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
||||
Lifetime Min/Max Temperature: --/ 0 Celsius
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
240
HDD/Seagate/ST9120/ST9120822AS/143AC5643D2D
Normal file
240
HDD/Seagate/ST9120/ST9120822AS/143AC5643D2D
Normal file
@@ -0,0 +1,240 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 5400.3
|
||||
Device Model: ST9120822AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.CAE
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Wed Dec 8 12:52:36 2021 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 60) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 111) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 253 006 - 0
|
||||
3 Spin_Up_Time PO---- 099 099 000 - 0
|
||||
4 Start_Stop_Count -O--CK 094 094 020 - 6948
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 076 060 030 - 8689716715
|
||||
9 Power_On_Hours -O--CK 098 098 000 - 2293
|
||||
10 Spin_Retry_Count PO--C- 100 100 034 - 0
|
||||
12 Power_Cycle_Count -O--CK 097 097 020 - 3813
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 001 001 000 - 106
|
||||
190 Airflow_Temperature_Cel -O---K 073 051 045 - 27 (Min/Max 27/27)
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 995
|
||||
193 Load_Cycle_Count -O--CK 013 013 000 - 174048
|
||||
194 Temperature_Celsius -O---K 027 049 000 - 27 (0 15 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 082 060 000 - 197490201
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 SL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 SL R/O 1 NCQ Command Error log
|
||||
0x11 SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 SL R/O 1 Write stream error log
|
||||
0x22 SL R/O 1 Read stream error log
|
||||
0x23 SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xa0 SL VS 1 Device vendor specific log
|
||||
0xa1 SL VS 20 Device vendor specific log
|
||||
0xa2 SL VS 101 Device vendor specific log
|
||||
0xa8 SL VS 20 Device vendor specific log
|
||||
0xa9 SL VS 1 Device vendor specific log
|
||||
0xe0 SL R/W 1 SCT Command/Status
|
||||
0xe1 SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 4
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 4 occurred at disk power-on lifetime: 2189 hours (91 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 54 3b 0f 40 Error: UNC at LBA = 0x000f3b54 = 998228
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 10 47 3b 0f 40 00 00:00:14.475 READ DMA EXT
|
||||
25 00 10 47 3b 0f 40 00 00:00:12.258 READ DMA EXT
|
||||
25 00 10 47 3b 0f 40 00 00:00:12.258 READ DMA EXT
|
||||
25 00 10 47 3b 0f 40 00 00:00:09.843 READ DMA EXT
|
||||
2f 00 01 10 00 00 00 00 00:00:09.842 READ LOG EXT
|
||||
|
||||
Error 3 occurred at disk power-on lifetime: 2189 hours (91 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 54 3b 0f 40 Error: UNC at LBA = 0x000f3b54 = 998228
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 10 47 3b 0f 40 00 00:00:14.475 READ DMA EXT
|
||||
25 00 10 47 3b 0f 40 00 00:00:12.258 READ DMA EXT
|
||||
25 00 10 47 3b 0f 40 00 00:00:12.258 READ DMA EXT
|
||||
2f 00 01 10 00 00 00 00 00:00:09.843 READ LOG EXT
|
||||
60 10 10 00 00 00 00 00 00:00:09.842 READ FPDMA QUEUED
|
||||
|
||||
Error 2 occurred at disk power-on lifetime: 2189 hours (91 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 54 3b 0f 40 Error: UNC at LBA = 0x000f3b54 = 998228
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 10 47 3b 0f 40 00 00:00:14.475 READ DMA EXT
|
||||
25 00 10 47 3b 0f 40 00 00:00:12.258 READ DMA EXT
|
||||
2f 00 01 10 00 00 00 00 00:00:12.258 READ LOG EXT
|
||||
60 10 10 00 00 00 00 00 00:00:09.843 READ FPDMA QUEUED
|
||||
60 10 10 00 00 00 00 00 00:00:09.842 READ FPDMA QUEUED
|
||||
|
||||
Error 1 occurred at disk power-on lifetime: 2189 hours (91 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 54 3b 0f 40 Error: UNC at LBA = 0x000f3b54 = 998228
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 10 47 3b 0f 40 00 00:00:09.840 READ DMA EXT
|
||||
2f 00 01 10 00 00 00 00 00:00:12.258 READ LOG EXT
|
||||
60 10 10 00 00 00 00 00 00:00:12.258 READ FPDMA QUEUED
|
||||
60 10 10 00 00 00 00 00 00:00:09.843 READ FPDMA QUEUED
|
||||
60 10 10 00 00 00 00 00 00:00:09.842 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 521 (0x0209)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 27 Celsius
|
||||
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
||||
Lifetime Min/Max Temperature: --/ 0 Celsius
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x8002 2 0 Vendor specific
|
||||
0x8003 2 1 Vendor specific
|
||||
0x8004 2 0 Vendor specific
|
||||
|
Reference in New Issue
Block a user