mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
Andrey Ponomarenko
295
HDD/Toshiba/MK8034/MK8034GSX/8599F110EF37
Normal file
295
HDD/Toshiba/MK8034/MK8034GSX/8599F110EF37
Normal file
@@ -0,0 +1,295 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba 2.5" HDD MK..34GSX
|
||||
Device Model: TOSHIBA MK8034GSX
|
||||
Serial Number: --
|
||||
Firmware Version: AH301H
|
||||
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Sat Jan 29 01:27:56 2022 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 61) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 050 - 0
|
||||
2 Throughput_Performance POS--- 100 100 050 - 0
|
||||
3 Spin_Up_Time PO---- 100 100 002 - 1666
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 21792
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 2
|
||||
7 Seek_Error_Rate POSR-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 076 076 000 - 9989
|
||||
10 Spin_Retry_Count PO--C- 253 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 7299
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1714
|
||||
192 Power-Off_Retract_Count -O--CK 098 098 000 - 1151
|
||||
193 Load_Cycle_Count -O--CK 054 054 000 - 467705
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 5/60)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 2
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 111
|
||||
220 Disk_Shift -O---- 100 100 000 - 101
|
||||
222 Loaded_Hours -O--CK 083 083 000 - 7053
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 332
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 119
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 119 [118] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.721 WRITE DMA EXT
|
||||
35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.720 WRITE DMA EXT
|
||||
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:23.719 SET FEATURES [Set transfer mode]
|
||||
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:23.714 [VENDOR SPECIFIC]
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.509 WRITE DMA EXT
|
||||
|
||||
Error 118 [117] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.509 WRITE DMA EXT
|
||||
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:23.508 SET FEATURES [Set transfer mode]
|
||||
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:23.503 [VENDOR SPECIFIC]
|
||||
35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.248 WRITE DMA EXT
|
||||
35 00 00 00 10 00 00 00 00 97 aa e0 00 00:00:23.247 WRITE DMA EXT
|
||||
|
||||
Error 117 [116] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 a4 29 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000a429 = 42025
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.248 WRITE DMA EXT
|
||||
35 00 00 00 10 00 00 00 00 97 aa e0 00 00:00:23.247 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 b0 6a e0 00 00:00:23.247 WRITE DMA EXT
|
||||
35 00 00 00 01 00 00 00 00 00 03 e0 00 00:00:23.247 WRITE DMA EXT
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:18.010 WRITE DMA EXT
|
||||
|
||||
Error 116 [115] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.542 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 4a a6 e0 00 00:00:17.542 WRITE DMA EXT
|
||||
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:17.542 SET FEATURES [Set transfer mode]
|
||||
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:17.536 [VENDOR SPECIFIC]
|
||||
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.320 WRITE DMA EXT
|
||||
|
||||
Error 115 [114] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.320 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 00 22 e0 00 00:00:17.320 WRITE DMA EXT
|
||||
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:17.319 SET FEATURES [Set transfer mode]
|
||||
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:17.314 [VENDOR SPECIFIC]
|
||||
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.096 WRITE DMA EXT
|
||||
|
||||
Error 114 [113] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.096 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 00 00 b4 aa e0 00 00:00:17.094 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 00 00 b5 2a e0 00 00:00:17.092 WRITE DMA EXT
|
||||
25 00 00 00 08 00 00 00 00 9c aa e0 00 00:00:17.090 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 00 9c 2a e0 00 00:00:17.081 READ DMA EXT
|
||||
|
||||
Error 113 [112] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.839 WRITE DMA EXT
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.787 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 97 ea e0 00 00:00:16.787 WRITE DMA EXT
|
||||
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:16.786 SET FEATURES [Set transfer mode]
|
||||
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:16.781 [VENDOR SPECIFIC]
|
||||
|
||||
Error 112 [111] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.582 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 9e aa e0 00 00:00:16.531 WRITE DMA EXT
|
||||
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.382 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 4a a6 e0 00 00:00:16.382 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 00 22 e0 00 00:00:16.381 WRITE DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user