80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 3637, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2022-03-18 23:39:11 +03:00
parent 9495463568
commit b1c41e7edc
3830 changed files with 648855 additions and 4579 deletions
Download Patch File Download Diff File Expand all files Collapse all files

336
HDD/WDC/WD10/WD10SPZX-60Z10T0/15E838624161 Normal file
View File

@@ -0,0 +1,336 @@
smartctl 7.2 2021-09-14 r5236 [FreeBSD 14.0-CURRENT amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile (SMR)
Device Model: WDC WD10SPZX-60Z10T0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 04.01A04
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
TRIM Command: Available, deterministic
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Dec 12 19:25:36 2021 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5340) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 210) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 21
3 Spin_Up_Time POS--K 057 053 021 - 1291
4 Start_Stop_Count -O--CK 100 100 000 - 4549
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-K 100 100 030 - 16933
9 Power_On_Hours -O--CK 100 100 000 - 5940
10 Spin_Retry_Count PO--CK 100 100 050 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2806
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO-RCK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 1
188 Command_Timeout -O--CK 100 100 000 - 2
189 High_Fly_Writes -O-RCK 100 100 000 - 0
191 G-Sense_Error_Rate -O--CK 001 001 000 - 1339
192 Power-Off_Retract_Count -O--CK 097 097 000 - 3165390897889
193 Load_Cycle_Count -O--CK 065 065 000 - 71618
194 Temperature_Celsius -O---K 026 054 000 - 26 (Min/Max 26/26)
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
240 Head_Flying_Hours -O--CK 100 100 000 - 190853
243 Unknown_Attribute -O--CK 100 100 000 - 770477
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 288 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 74 Device vendor specific log
0xb9 GPL,SL VS 4 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 2946 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2946 [17] occurred at disk power-on lifetime: 5940 hours (247 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:06.352 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:06.352 SECURITY FREEZE LOCK
25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:05.654 READ DMA EXT
ef 00 10 00 03 00 00 00 00 00 00 f0 00 00:00:05.649 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 f0 00 00:00:05.649 IDENTIFY DEVICE
Error 2945 [16] occurred at disk power-on lifetime: 5940 hours (247 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:06.343 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:06.343 SECURITY FREEZE LOCK
25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:05.642 READ DMA EXT
ef 00 10 00 03 00 00 00 00 00 00 f0 00 00:00:05.637 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 f0 00 00:00:05.637 IDENTIFY DEVICE
Error 2944 [15] occurred at disk power-on lifetime: 5939 hours (247 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 03:34:29.965 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 03:34:29.964 SECURITY FREEZE LOCK
25 00 00 00 01 00 00 00 00 00 00 e0 00 03:34:29.413 READ DMA EXT
ef 00 10 00 03 00 00 00 00 00 00 f0 00 03:34:29.407 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 f0 00 03:34:29.407 IDENTIFY DEVICE
Error 2943 [14] occurred at disk power-on lifetime: 5939 hours (247 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 03:22:44.156 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 03:22:44.155 SECURITY FREEZE LOCK
25 00 00 00 01 00 00 00 00 00 00 e0 00 03:22:43.603 READ DMA EXT
ef 00 10 00 03 00 00 00 00 00 00 f0 00 03:22:43.598 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 f0 00 03:22:43.597 IDENTIFY DEVICE
Error 2942 [13] occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 01:43:30.094 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 01:43:30.093 SECURITY FREEZE LOCK
25 00 00 00 01 00 00 00 00 00 00 e0 00 01:43:29.539 READ DMA EXT
ef 00 10 00 03 00 00 00 00 00 00 f0 00 01:43:29.534 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 f0 00 01:43:29.533 IDENTIFY DEVICE
Error 2941 [12] occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 01:36:33.781 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 01:36:33.781 SECURITY FREEZE LOCK
25 00 00 00 80 00 00 3a 00 72 00 e0 00 01:36:05.165 READ DMA EXT
25 00 00 00 80 00 00 3a 01 b2 00 e0 00 01:36:05.075 READ DMA EXT
25 00 00 00 08 00 00 00 06 6a 72 e0 00 01:36:05.074 READ DMA EXT
Error 2940 [11] occurred at disk power-on lifetime: 5936 hours (247 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:53:51.831 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:53:51.831 SECURITY FREEZE LOCK
25 00 00 00 40 00 00 3a 00 70 06 e0 00 00:53:51.250 READ DMA EXT
25 00 00 00 80 00 00 3a 00 72 00 e0 00 00:53:51.250 READ DMA EXT
25 00 00 00 08 00 00 00 06 6a 72 e0 00 00:53:51.250 READ DMA EXT
Error 2939 [10] occurred at disk power-on lifetime: 5936 hours (247 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 02 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:02:16.815 SANITIZE DEVICE
f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:16.810 SECURITY FREEZE LOCK
25 00 00 00 40 00 00 3a 00 70 06 e0 00 00:02:16.265 READ DMA EXT
25 00 00 00 80 00 00 3a 00 72 00 e0 00 00:02:16.265 READ DMA EXT
25 00 00 00 08 00 00 00 06 6a 72 e0 00 00:02:16.264 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 31 -
# 2 Short offline Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 26/26 Celsius
Lifetime Min/Max Temperature: 8/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (69)
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 670 Vendor specific

182
HDD/WDC/WD10/WD10SPZX-60Z10T0/EBCFE463775D Normal file
View File

@@ -0,0 +1,182 @@
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile (SMR)
Device Model: WDC WD10SPZX-60Z10T0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 04.01A04
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
TRIM Command: Available, deterministic
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 11 17:08:39 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 840) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 305) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
3 Spin_Up_Time POS--K 057 054 021 - 1266
4 Start_Stop_Count -O--CK 100 100 000 - 1036
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-K 100 100 030 - 39712
9 Power_On_Hours -O--CK 100 100 000 - 3909
10 Spin_Retry_Count PO--CK 100 100 050 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 988
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO-RCK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
191 G-Sense_Error_Rate -O--CK 001 001 000 - 2891
192 Power-Off_Retract_Count -O--CK 100 100 000 - 17179869188
193 Load_Cycle_Count -O--CK 084 084 000 - 32248
194 Temperature_Celsius -O---K 032 046 000 - 32 (Min/Max 30/32)
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
240 Head_Flying_Hours -O--CK 100 100 000 - 291395
243 Unknown_Attribute -O--CK 100 100 000 - 4737908
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 288 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 74 Device vendor specific log
0xb9 GPL,SL VS 4 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 30/32 Celsius
Lifetime Min/Max Temperature: 13/46 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (47)
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 794 Vendor specific