mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
Andrey Ponomarenko
180
HDD/WDC/WD30/WD30EZRX-00MMMB0/2F9F74D9EF14
Normal file
180
HDD/WDC/WD30/WD30EZRX-00MMMB0/2F9F74D9EF14
Normal file
@@ -0,0 +1,180 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Green
|
||||
Device Model: WDC WD30EZRX-00MMMB0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 80.00A80
|
||||
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jul 15 08:58:18 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (51180) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 492) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
SCT capabilities: (0x3035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 146 145 021 - 9691
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 1489
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 055 055 000 - 33146
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 1361
|
||||
192 Power-Off_Retract_Count -O--CK 199 199 000 - 1253
|
||||
193 Load_Cycle_Count -O--CK 001 001 000 - 891415
|
||||
194 Temperature_Celsius -O---K 119 089 000 - 33
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
||||
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
||||
0xbd GPL,SL VS 1 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xc1 GPL VS 93 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 33061 -
|
||||
# 2 Short offline Completed without error 00% 32901 -
|
||||
# 3 Short offline Completed without error 00% 32733 -
|
||||
# 4 Short offline Completed without error 00% 32574 -
|
||||
# 5 Short offline Completed without error 00% 32415 -
|
||||
# 6 Short offline Completed without error 00% 32263 -
|
||||
# 7 Short offline Completed without error 00% 32095 -
|
||||
# 8 Short offline Completed without error 00% 31937 -
|
||||
# 9 Short offline Completed without error 00% 31798 -
|
||||
#10 Short offline Completed without error 00% 31630 -
|
||||
#11 Short offline Completed without error 00% 31469 -
|
||||
#12 Short offline Completed without error 00% 31313 -
|
||||
#13 Short offline Completed without error 00% 31156 -
|
||||
#14 Short offline Completed without error 00% 30989 -
|
||||
#15 Short offline Completed without error 00% 30828 -
|
||||
#16 Short offline Completed without error 00% 30670 -
|
||||
#17 Short offline Completed without error 00% 30513 -
|
||||
#18 Short offline Completed without error 00% 30352 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 26/35 Celsius
|
||||
Lifetime Min/Max Temperature: 0/63 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (71)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 89581 Vendor specific
|
||||
|
||||
|
||||
|
||||
330
HDD/WDC/WD30/WD30EZRX-00MMMB0/FA1DBC367807
Normal file
330
HDD/WDC/WD30/WD30EZRX-00MMMB0/FA1DBC367807
Normal file
@@ -0,0 +1,330 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Green
|
||||
Device Model: WDC WD30EZRX-00MMMB0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 80.00A80
|
||||
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jul 15 08:58:18 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (52800) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 507) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
SCT capabilities: (0x3035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 141 140 021 - 9916
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 1390
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 055 055 000 - 33004
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 1261
|
||||
192 Power-Off_Retract_Count -O--CK 199 199 000 - 1225
|
||||
193 Load_Cycle_Count -O--CK 001 001 000 - 893051
|
||||
194 Temperature_Celsius -O---K 119 090 000 - 33
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
||||
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
||||
0xbd GPL,SL VS 1 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xc1 GPL VS 93 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
||||
Device Error Count: 73 (device log contains only the most recent 24 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 73 [0] occurred at disk power-on lifetime: 27642 hours (1151 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 52 7e 63 78 40 00 Error: UNC at LBA = 0x1527e6378 = 5678982008
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 30 00 01 52 7e 6b 68 40 00 4d+21:49:48.496 READ FPDMA QUEUED
|
||||
60 01 00 00 08 00 01 52 7e 6a 68 40 00 4d+21:49:48.495 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 01 52 7e 69 68 40 00 4d+21:49:48.494 READ FPDMA QUEUED
|
||||
60 01 00 00 28 00 01 52 7e 68 68 40 00 4d+21:49:48.490 READ FPDMA QUEUED
|
||||
60 00 e8 00 68 00 01 52 7e 67 80 40 00 4d+21:49:48.478 READ FPDMA QUEUED
|
||||
|
||||
Error 72 [23] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 e0 00 00 00 00 00 00 00 48 40 00 00:07:27.655 READ FPDMA QUEUED
|
||||
61 00 10 00 00 00 01 5d 50 a0 38 40 00 00:07:27.539 WRITE FPDMA QUEUED
|
||||
61 00 10 00 00 00 01 5d 50 9e 38 40 00 00:07:27.535 WRITE FPDMA QUEUED
|
||||
61 00 10 00 00 00 00 00 00 02 38 40 00 00:07:27.511 WRITE FPDMA QUEUED
|
||||
60 00 10 00 10 00 01 5d 50 a0 38 40 00 00:07:27.511 READ FPDMA QUEUED
|
||||
|
||||
Error 71 [22] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 e0 00 18 00 01 5d 50 a0 48 40 00 00:07:24.601 READ FPDMA QUEUED
|
||||
60 00 e0 00 10 00 01 5d 50 9e 48 40 00 00:07:24.601 READ FPDMA QUEUED
|
||||
60 00 e0 00 08 00 00 00 00 02 48 40 00 00:07:24.601 READ FPDMA QUEUED
|
||||
60 00 e0 00 00 00 00 00 00 00 48 40 00 00:07:24.601 READ FPDMA QUEUED
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:24.597 IDENTIFY DEVICE
|
||||
|
||||
Error 70 [21] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 e0 00 18 00 01 5d 50 a0 48 40 00 00:07:21.717 READ FPDMA QUEUED
|
||||
60 00 e0 00 10 00 01 5d 50 9e 48 40 00 00:07:21.717 READ FPDMA QUEUED
|
||||
60 00 e0 00 08 00 00 00 00 02 48 40 00 00:07:21.717 READ FPDMA QUEUED
|
||||
60 00 e0 00 00 00 00 00 00 00 48 40 00 00:07:21.717 READ FPDMA QUEUED
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:21.714 IDENTIFY DEVICE
|
||||
|
||||
Error 69 [20] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 00 00 00 00 00 00 68 40 00 00:07:18.740 READ FPDMA QUEUED
|
||||
60 00 e0 00 20 00 01 5d 50 a0 20 40 00 00:07:18.740 READ FPDMA QUEUED
|
||||
60 00 e0 00 18 00 01 5d 50 9e 20 40 00 00:07:18.740 READ FPDMA QUEUED
|
||||
60 00 e0 00 10 00 00 00 00 02 20 40 00 00:07:18.740 READ FPDMA QUEUED
|
||||
60 00 e0 00 08 00 00 00 00 00 20 40 00 00:07:18.740 READ FPDMA QUEUED
|
||||
|
||||
Error 68 [19] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 08 00 00 00 00 00 00 40 00 00:07:15.736 READ FPDMA QUEUED
|
||||
60 00 01 00 08 00 01 5d 50 a3 ae 40 00 00:07:15.736 READ FPDMA QUEUED
|
||||
60 00 01 00 08 00 01 5d 50 a3 af 40 00 00:07:15.736 READ FPDMA QUEUED
|
||||
60 00 01 00 08 00 01 5d 50 a3 ae 40 00 00:07:15.736 READ FPDMA QUEUED
|
||||
60 00 04 00 08 00 01 5d 50 a3 71 40 00 00:07:15.736 READ FPDMA QUEUED
|
||||
|
||||
Error 67 [18] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 e0 00 00 00 00 00 00 00 48 40 00 00:07:12.629 READ FPDMA QUEUED
|
||||
60 00 10 00 10 00 01 5d 50 a0 38 40 00 00:07:12.509 READ FPDMA QUEUED
|
||||
60 00 10 00 08 00 01 5d 50 9e 38 40 00 00:07:12.509 READ FPDMA QUEUED
|
||||
60 00 10 00 00 00 00 00 00 02 38 40 00 00:07:12.509 READ FPDMA QUEUED
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:12.506 IDENTIFY DEVICE
|
||||
|
||||
Error 66 [17] occurred at disk power-on lifetime: 25037 hours (1043 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 00 70 40 00 Error: UNC at LBA = 0x00000070 = 112
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 e0 00 18 00 01 5d 50 a0 48 40 00 00:07:09.881 READ FPDMA QUEUED
|
||||
60 00 e0 00 10 00 01 5d 50 9e 48 40 00 00:07:09.881 READ FPDMA QUEUED
|
||||
60 00 e0 00 08 00 00 00 00 02 48 40 00 00:07:09.881 READ FPDMA QUEUED
|
||||
60 00 e0 00 00 00 00 00 00 00 48 40 00 00:07:09.881 READ FPDMA QUEUED
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:09.877 IDENTIFY DEVICE
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 32919 -
|
||||
# 2 Short offline Completed without error 00% 32759 -
|
||||
# 3 Short offline Completed without error 00% 32591 -
|
||||
# 4 Short offline Completed without error 00% 32431 -
|
||||
# 5 Short offline Completed without error 00% 32272 -
|
||||
# 6 Short offline Completed without error 00% 32120 -
|
||||
# 7 Short offline Completed without error 00% 31953 -
|
||||
# 8 Short offline Completed without error 00% 31795 -
|
||||
# 9 Short offline Completed without error 00% 31655 -
|
||||
#10 Short offline Completed without error 00% 31488 -
|
||||
#11 Short offline Completed without error 00% 31327 -
|
||||
#12 Short offline Completed without error 00% 31171 -
|
||||
#13 Short offline Completed without error 00% 31014 -
|
||||
#14 Short offline Completed without error 00% 30846 -
|
||||
#15 Short offline Completed without error 00% 30686 -
|
||||
#16 Short offline Completed without error 00% 30528 -
|
||||
#17 Short offline Completed without error 00% 30371 -
|
||||
#18 Short offline Completed without error 00% 30210 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 26/36 Celsius
|
||||
Lifetime Min/Max Temperature: 0/62 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 478 (277)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x8000 4 89582 Vendor specific
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user