mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
Andrey Ponomarenko
313
HDD/WDC/WD3200/WD3200AAJS-22B4A0/CE03BC7F4473
Normal file
313
HDD/WDC/WD3200/WD3200AAJS-22B4A0/CE03BC7F4473
Normal file
@@ -0,0 +1,313 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Caviar Blue Serial ATA
|
||||
Device Model: WDC WD3200AAJS-22B4A0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 01.03A01
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Fri Feb 11 23:23:50 2022 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 5760) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 70) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
SCT capabilities: (0x303f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 199 197 051 - 165865
|
||||
3 Spin_Up_Time POS--K 154 141 021 - 3275
|
||||
4 Start_Stop_Count -O--CK 098 098 000 - 2033
|
||||
5 Reallocated_Sector_Ct PO--CK 199 199 140 - 4
|
||||
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
||||
9 Power_On_Hours -O--CK 028 028 000 - 53052
|
||||
10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 1700
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 577
|
||||
193 Load_Cycle_Count -O--CK 200 200 000 - 2033
|
||||
194 Temperature_Celsius -O---K 100 083 000 - 43
|
||||
196 Reallocated_Event_Count -O--CK 128 128 000 - 72
|
||||
197 Current_Pending_Sector -O--CK 200 183 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 190 000 - 8
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 183 000 - 18
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
||||
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xc1 GPL VS 24 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
||||
Device Error Count: 22729 (device log contains only the most recent 24 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 22729 [8] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 80 00 00 01 bd ab 18 40 08 00:07:17.223 READ FPDMA QUEUED
|
||||
60 00 20 00 78 00 00 00 0a 40 a0 40 08 00:07:17.212 READ FPDMA QUEUED
|
||||
60 00 48 00 70 00 00 00 8f 7d b8 40 08 00:07:17.198 READ FPDMA QUEUED
|
||||
60 00 80 00 68 00 00 00 8f 7d 38 40 08 00:07:17.198 READ FPDMA QUEUED
|
||||
60 00 20 00 60 00 00 00 8f 7d 18 40 08 00:07:17.198 READ FPDMA QUEUED
|
||||
|
||||
Error 22728 [7] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 88 00 00 01 bd ab 18 40 08 00:07:13.785 READ FPDMA QUEUED
|
||||
60 00 20 00 f8 00 00 00 16 3e c0 40 08 00:07:13.785 READ FPDMA QUEUED
|
||||
61 00 08 00 b8 00 00 03 3a f5 10 40 08 00:07:13.785 WRITE FPDMA QUEUED
|
||||
61 00 68 00 b0 00 00 03 3a f4 98 40 08 00:07:13.785 WRITE FPDMA QUEUED
|
||||
60 00 08 00 a8 00 00 01 bd a6 c8 40 08 00:07:13.785 READ FPDMA QUEUED
|
||||
|
||||
Error 22727 [6] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 04 88 00 d8 00 00 01 bd a6 a8 40 08 00:07:10.574 READ FPDMA QUEUED
|
||||
60 04 88 00 d0 00 00 01 bd a2 20 40 08 00:07:10.569 READ FPDMA QUEUED
|
||||
60 04 58 00 c8 00 00 01 bd 9d c8 40 08 00:07:10.544 READ FPDMA QUEUED
|
||||
60 00 08 00 c0 00 00 01 bd 9d b0 40 08 00:07:10.543 READ FPDMA QUEUED
|
||||
60 00 08 00 b8 00 00 01 bd 99 40 40 08 00:07:10.542 READ FPDMA QUEUED
|
||||
|
||||
Error 22726 [5] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 fe 00 01 9c 00 bd 62 40 00 Error: UNC at LBA = 0x19c00bd62 = 6912261474
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 04 a8 00 20 00 00 01 bd 99 20 40 08 00:07:06.937 READ FPDMA QUEUED
|
||||
60 04 b8 00 18 00 00 01 bd 94 68 40 08 00:07:06.258 READ FPDMA QUEUED
|
||||
60 02 78 00 10 00 00 01 bd 91 f0 40 08 00:07:06.255 READ FPDMA QUEUED
|
||||
60 02 08 00 08 00 00 01 bd 8f e8 40 08 00:07:06.244 READ FPDMA QUEUED
|
||||
60 02 28 00 00 00 00 01 bd 8d c0 40 08 00:07:06.242 READ FPDMA QUEUED
|
||||
|
||||
Error 22725 [4] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 b0 00 00 01 bd ab 18 40 08 01:10:31.962 READ FPDMA QUEUED
|
||||
61 00 08 00 70 00 00 00 77 37 38 40 08 01:10:31.091 WRITE FPDMA QUEUED
|
||||
61 00 08 00 f0 00 00 02 7d be a0 40 08 01:10:29.773 WRITE FPDMA QUEUED
|
||||
61 00 08 00 e8 00 00 02 7e e5 90 40 08 01:10:29.773 WRITE FPDMA QUEUED
|
||||
61 00 08 00 e0 00 00 02 7e e5 78 40 08 01:10:29.772 WRITE FPDMA QUEUED
|
||||
|
||||
Error 22724 [3] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 98 00 00 01 bd ab 18 40 08 01:09:42.200 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 08 01:09:42.116 FLUSH CACHE EXT
|
||||
61 00 28 00 70 00 00 02 ab 6e c8 40 08 01:09:42.116 WRITE FPDMA QUEUED
|
||||
61 0a 00 00 80 00 00 03 3a c1 08 40 08 01:09:42.090 WRITE FPDMA QUEUED
|
||||
61 0a 00 00 10 00 00 03 3a 5f 58 40 08 01:09:42.079 WRITE FPDMA QUEUED
|
||||
|
||||
Error 22723 [2] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 38 00 00 01 bd ab 18 40 08 01:09:38.837 READ FPDMA QUEUED
|
||||
61 00 20 00 00 00 00 00 18 e7 a0 40 08 01:09:38.837 WRITE FPDMA QUEUED
|
||||
61 00 08 00 18 00 00 02 60 1e 68 40 08 01:09:38.837 WRITE FPDMA QUEUED
|
||||
61 0a 00 00 70 00 00 03 3a 4b 58 40 08 01:09:38.816 WRITE FPDMA QUEUED
|
||||
61 04 30 00 30 00 00 03 2e f7 e0 40 08 01:09:38.814 WRITE FPDMA QUEUED
|
||||
|
||||
Error 22722 [1] occurred at disk power-on lifetime: 52914 hours (2204 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 01 ab 00 bd 18 40 00 Error: UNC at LBA = 0x1ab00bd18 = 7163919640
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 90 00 00 01 bd ab 18 40 08 01:09:35.577 READ FPDMA QUEUED
|
||||
61 00 20 00 18 00 00 00 18 e1 00 40 08 01:09:35.577 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 08 01:09:35.551 FLUSH CACHE EXT
|
||||
61 00 08 00 80 00 00 02 ef be 70 40 08 01:09:35.551 WRITE FPDMA QUEUED
|
||||
61 00 08 00 f8 00 00 00 08 30 80 40 08 01:09:35.551 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed: read failure 90% 44055 15120201
|
||||
# 2 Short offline Completed: read failure 90% 44055 15120201
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 43 Celsius
|
||||
Power Cycle Min/Max Temperature: 22/44 Celsius
|
||||
Lifetime Min/Max Temperature: 11/60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 128 (121)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
||||
0x8000 4 104540 Vendor specific
|
||||
|
||||
Reference in New Issue
Block a user