mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
119
HDD/WDC/WD5000/WD5000LPCX-24VHAT0/D38256833428
Normal file
119
HDD/WDC/WD5000/WD5000LPCX-24VHAT0/D38256833428
Normal file
@@ -0,0 +1,119 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Blue Mobile
|
||||
Device Model: WDC WD5000LPCX-24VHAT0
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 02.01A02
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Dec 26 19:40:56 2021 +05
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 8640) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 100) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
SCT capabilities: (0x3035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
|
||||
3 Spin_Up_Time 0x0027 155 148 021 Pre-fail Always - 1225
|
||||
4 Start_Stop_Count 0x0032 043 043 000 Old_age Always - 57367
|
||||
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
||||
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6009
|
||||
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2070
|
||||
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 546
|
||||
193 Load_Cycle_Count 0x0032 157 157 000 Old_age Always - 129831
|
||||
194 Temperature_Celsius 0x0022 105 093 000 Old_age Always - 38
|
||||
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
||||
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Interrupted (host reset) 80% 4728 -
|
||||
# 2 Extended offline Aborted by host 90% 4727 -
|
||||
# 3 Short offline Completed without error 00% 4319 -
|
||||
# 4 Short offline Completed without error 00% 4306 -
|
||||
# 5 Short offline Completed without error 00% 4305 -
|
||||
# 6 Short offline Completed without error 00% 4281 -
|
||||
# 7 Short offline Completed without error 00% 4258 -
|
||||
# 8 Short offline Completed without error 00% 4234 -
|
||||
# 9 Short offline Completed without error 00% 4194 -
|
||||
#10 Short offline Completed without error 00% 4169 -
|
||||
#11 Short offline Completed without error 00% 4159 -
|
||||
#12 Short offline Completed without error 00% 4119 -
|
||||
#13 Short offline Completed without error 00% 4083 -
|
||||
#14 Short offline Completed without error 00% 4068 -
|
||||
#15 Extended offline Interrupted (host reset) 80% 4046 -
|
||||
#16 Extended offline Aborted by host 90% 3937 -
|
||||
#17 Extended offline Aborted by host 90% 3937 -
|
||||
#18 Extended offline Aborted by host 90% 3937 -
|
||||
#19 Short offline Completed without error 00% 3932 -
|
||||
#20 Short offline Completed without error 00% 3909 -
|
||||
#21 Short offline Completed without error 00% 3904 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user