mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
Andrey Ponomarenko
108
SSD/Micron/5300/5300_MTFDDAK240TDS/BB27B86BE09B
Normal file
108
SSD/Micron/5300/5300_MTFDDAK240TDS/BB27B86BE09B
Normal file
@@ -0,0 +1,108 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.9] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: Micron_5300_MTFDDAK240TDS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00a075 ...
|
||||
Firmware Version: D3MU001
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Sep 8 12:54:49 2021 BST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 837) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 5) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x0035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
|
||||
5 Reallocated_Sector_Ct 0x0032 100 100 001 Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1982
|
||||
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 54
|
||||
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
|
||||
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
||||
172 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 0
|
||||
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
|
||||
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 27
|
||||
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
|
||||
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
||||
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 29
|
||||
194 Temperature_Celsius 0x0022 061 040 000 Old_age Always - 39 (Min/Max 24/60)
|
||||
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0
|
||||
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline - 0
|
||||
206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
|
||||
246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4303588780
|
||||
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 134955033
|
||||
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 8824568
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 2305
|
||||
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
||||
211 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 50
|
||||
212 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user