mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3637, modified: 0)
This commit is contained in:
196
SSD/Transcend/TS128/TS128GMSA230S/0365B191DA3E
Normal file
196
SSD/Transcend/TS128/TS128GMSA230S/0365B191DA3E
Normal file
@@ -0,0 +1,196 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p20-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: R0427GN1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Sep 28 12:40:46 2021 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 254 (maximum performance)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x80) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 5
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 23
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 21
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 3
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 1
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 43
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 14
|
||||
164 Total_Erase_Count ------ 100 100 000 - 174
|
||||
165 Max_Erase_Count ------ 100 100 000 - 3
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 0
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 9
|
||||
194 Temperature_Celsius ------ 100 100 000 - 45
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 408
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 148
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 1566
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Completed [00% left] (0-65535)
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 23 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5 --- Power-on Hours
|
||||
0x01 0x018 6 26748014 --- Logical Sectors Written
|
||||
0x01 0x020 6 573023 --- Number of Write Commands
|
||||
0x01 0x028 6 9717729 --- Logical Sectors Read
|
||||
0x01 0x030 6 237967 --- Number of Read Commands
|
||||
0x01 0x038 6 1 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 9 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 45 --- Current Temperature
|
||||
0x05 0x010 1 48 --- Average Short Term Temperature
|
||||
0x05 0x018 1 47 --- Average Long Term Temperature
|
||||
0x05 0x020 1 66 --- Highest Temperature
|
||||
0x05 0x028 1 0 --- Lowest Temperature
|
||||
0x05 0x030 1 50 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 47 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 582 --- Number of Hardware Resets
|
||||
0x06 0x010 4 32 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
164
SSD/Transcend/TS128/TS128GMSA230S/093661675121
Normal file
164
SSD/Transcend/TS128/TS128GMSA230S/093661675121
Normal file
@@ -0,0 +1,164 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: 02J0TBD1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jul 29 07:50:21 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 615
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 28
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 23595
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 460
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 322
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 445
|
||||
164 Total_Erase_Count ------ 100 100 000 - 6064
|
||||
165 Max_Erase_Count ------ 100 100 000 - 16
|
||||
166 Min_Erase_Count ------ 100 100 000 - 1
|
||||
167 Average_Erase_Count ------ 100 100 000 - 6
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 69
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 10
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 5
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 19
|
||||
194 Temperature_Celsius ------ 100 100 000 - 46 (Min/Max 13/65)
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 2
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 26630
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 32188
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 62680
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 615 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
7 0 65535 Read_scanning was completed without error
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 28 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 615 --- Power-on Hours
|
||||
0x01 0x018 6 1745268577 --- Logical Sectors Written
|
||||
0x01 0x020 6 34111993 --- Number of Write Commands
|
||||
0x01 0x028 6 2109522360 --- Logical Sectors Read
|
||||
0x01 0x030 6 29608402 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 19 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 464 --- Number of Hardware Resets
|
||||
0x06 0x018 4 2 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
196
SSD/Transcend/TS128/TS128GMSA230S/0B6941C28FF5
Normal file
196
SSD/Transcend/TS128/TS128GMSA230S/0B6941C28FF5
Normal file
@@ -0,0 +1,196 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: R0427GN1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Nov 28 20:59:23 2021 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 254 (maximum performance)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x80) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 84
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 26
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 74
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 8
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 4
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 35
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 22
|
||||
164 Total_Erase_Count ------ 100 100 000 - 330
|
||||
165 Max_Erase_Count ------ 100 100 000 - 3
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 0
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 0
|
||||
194 Temperature_Celsius ------ 100 100 000 - 42
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 988
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 127
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 2970
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Completed [00% left] (0-65535)
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 26 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 84 --- Power-on Hours
|
||||
0x01 0x018 6 64756049 --- Logical Sectors Written
|
||||
0x01 0x020 6 3980923 --- Number of Write Commands
|
||||
0x01 0x028 6 8324460 --- Logical Sectors Read
|
||||
0x01 0x030 6 278660 --- Number of Read Commands
|
||||
0x01 0x038 6 4294967296 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 42 --- Current Temperature
|
||||
0x05 0x010 1 38 --- Average Short Term Temperature
|
||||
0x05 0x018 1 38 --- Average Long Term Temperature
|
||||
0x05 0x020 1 49 --- Highest Temperature
|
||||
0x05 0x028 1 0 --- Lowest Temperature
|
||||
0x05 0x030 1 45 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 44 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 569 --- Number of Hardware Resets
|
||||
0x06 0x010 4 10 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/347088200B3A
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/347088200B3A
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0TBD1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jan 20 22:23:21 2022 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 2695
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 81
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 79049
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 1506
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 1407
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 1491
|
||||
164 Total_Erase_Count ------ 100 100 000 - 15614
|
||||
165 Max_Erase_Count ------ 100 100 000 - 39
|
||||
166 Min_Erase_Count ------ 100 100 000 - 6
|
||||
167 Average_Erase_Count ------ 100 100 000 - 16
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 71
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 10
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 26
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 41
|
||||
194 Temperature_Celsius ------ 100 100 000 - 50 (Min/Max 12/62)
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 77195
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 1732
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 188836
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 81 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2695 --- Power-on Hours
|
||||
0x01 0x018 6 5059068676 --- Logical Sectors Written
|
||||
0x01 0x020 6 108009884 --- Number of Write Commands
|
||||
0x01 0x028 6 113518823 --- Logical Sectors Read
|
||||
0x01 0x030 6 2402715 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 41 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 304 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/3BED656B2396
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/3BED656B2396
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Wed Feb 16 20:57:43 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 2717
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 20
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 212236
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 4013
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 3925
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 4004
|
||||
164 Total_Erase_Count ------ 100 100 000 - 50381
|
||||
165 Max_Erase_Count ------ 100 100 000 - 81
|
||||
166 Min_Erase_Count ------ 100 100 000 - 13
|
||||
167 Average_Erase_Count ------ 100 100 000 - 56
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 35
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 41
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 99
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 98
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 15
|
||||
194 Temperature_Celsius ------ 100 100 000 - 52
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 269173
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 1398
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 201524
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 20 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2717 --- Power-on Hours
|
||||
0x01 0x018 6 460693338 --- Logical Sectors Written
|
||||
0x01 0x020 6 252135628 --- Number of Write Commands
|
||||
0x01 0x028 6 91674605 --- Logical Sectors Read
|
||||
0x01 0x030 6 2198899 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 107 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/3C04DC77A5A7
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/3C04DC77A5A7
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Feb 2 07:33:00 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 9279
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 38
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 247020
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 4676
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 4534
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 4660
|
||||
164 Total_Erase_Count ------ 100 100 000 - 23402
|
||||
165 Max_Erase_Count ------ 100 100 000 - 36
|
||||
166 Min_Erase_Count ------ 100 100 000 - 5
|
||||
167 Average_Erase_Count ------ 100 100 000 - 25
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 67
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 13
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 114
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 28
|
||||
194 Temperature_Celsius ------ 100 100 000 - 60
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 308396
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 12417
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 93608
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 38 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 9279 --- Power-on Hours
|
||||
0x01 0x018 6 3031175069 --- Logical Sectors Written
|
||||
0x01 0x020 6 273893208 --- Number of Write Commands
|
||||
0x01 0x028 6 813772493 --- Logical Sectors Read
|
||||
0x01 0x030 6 22309613 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 28 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 5091 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
196
SSD/Transcend/TS128/TS128GMSA230S/4BA99FF35F35
Normal file
196
SSD/Transcend/TS128/TS128GMSA230S/4BA99FF35F35
Normal file
@@ -0,0 +1,196 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: R0427GN1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Nov 17 14:48:42 2021 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 254 (maximum performance)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x80) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 0
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 8
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 7
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 1
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 29
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 28
|
||||
164 Total_Erase_Count ------ 100 100 000 - 47
|
||||
165 Max_Erase_Count ------ 100 100 000 - 1
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 0
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 0
|
||||
194 Temperature_Celsius ------ 100 100 000 - 40
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 140
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 42
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 423
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Completed [00% left] (0-65535)
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 0 --- Power-on Hours
|
||||
0x01 0x018 6 9226341 --- Logical Sectors Written
|
||||
0x01 0x020 6 115796 --- Number of Write Commands
|
||||
0x01 0x028 6 2817844 --- Logical Sectors Read
|
||||
0x01 0x030 6 25964 --- Number of Read Commands
|
||||
0x01 0x038 6 1 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 --- Current Temperature
|
||||
0x05 0x010 1 41 --- Average Short Term Temperature
|
||||
0x05 0x018 1 42 --- Average Long Term Temperature
|
||||
0x05 0x020 1 49 --- Highest Temperature
|
||||
0x05 0x028 1 0 --- Lowest Temperature
|
||||
0x05 0x030 1 44 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 43 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 14 --- Number of Hardware Resets
|
||||
0x06 0x010 4 3 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/4EA971E4B0F7
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/4EA971E4B0F7
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Jan 7 10:09:28 2022 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 60) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 5540
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 24
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 250403
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 4741
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 4584
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 4724
|
||||
164 Total_Erase_Count ------ 100 100 000 - 71519
|
||||
165 Max_Erase_Count ------ 100 100 000 - 84
|
||||
166 Min_Erase_Count ------ 100 100 000 - 13
|
||||
167 Average_Erase_Count ------ 100 100 000 - 79
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 46
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 28
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 98
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 82
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 23
|
||||
194 Temperature_Celsius ------ 100 100 000 - 67
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 398923
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 57824
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 286076
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
7 0 65535 Read_scanning was completed without error
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 24 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5540 --- Power-on Hours
|
||||
0x01 0x018 6 374018031 --- Logical Sectors Written
|
||||
0x01 0x020 6 262696324 --- Number of Write Commands
|
||||
0x01 0x028 6 3789591398 --- Logical Sectors Read
|
||||
0x01 0x030 6 52804900 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 23 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1963 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 2 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/55F759119A54
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/55F759119A54
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Jul 14 21:10:57 2021 PDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 3115
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 26
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 666899
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 12598
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 12444
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 12583
|
||||
164 Total_Erase_Count ------ 100 100 000 - 146896
|
||||
165 Max_Erase_Count ------ 100 100 000 - 161
|
||||
166 Min_Erase_Count ------ 100 100 000 - 101
|
||||
167 Average_Erase_Count ------ 100 100 000 - 159
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 67
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 10
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 95
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 293
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 8
|
||||
194 Temperature_Celsius ------ 100 100 000 - 76
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 810538
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 7051
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 587584
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 26 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3115 --- Power-on Hours
|
||||
0x01 0x018 6 1579826557 --- Logical Sectors Written
|
||||
0x01 0x020 6 441689174 --- Number of Write Commands
|
||||
0x01 0x028 6 462108331 --- Logical Sectors Read
|
||||
0x01 0x030 6 9846139 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 181 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 5 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
165
SSD/Transcend/TS128/TS128GMSA230S/58362D47352C
Normal file
165
SSD/Transcend/TS128/TS128GMSA230S/58362D47352C
Normal file
@@ -0,0 +1,165 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p20-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Sep 15 10:47:24 2021 EEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 3657
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 21
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 171419
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 3260
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 3099
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 3234
|
||||
164 Total_Erase_Count ------ 100 100 000 - 24448
|
||||
165 Max_Erase_Count ------ 100 100 000 - 34
|
||||
166 Min_Erase_Count ------ 100 100 000 - 10
|
||||
167 Average_Erase_Count ------ 100 100 000 - 27
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 51
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 27
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 97
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 7
|
||||
194 Temperature_Celsius ------ 100 100 000 - 75
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 198312
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 2433
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 97792
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 21 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3657 --- Power-on Hours
|
||||
0x01 0x018 6 111705186 --- Logical Sectors Written
|
||||
0x01 0x020 6 155855272 --- Number of Write Commands
|
||||
0x01 0x028 6 159493726 --- Logical Sectors Read
|
||||
0x01 0x030 6 4324448 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 124 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
||||
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/80DA412C4235
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/80DA412C4235
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Mar 9 14:33:37 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 7005
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 15
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 75770
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 1448
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 1261
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 1429
|
||||
164 Total_Erase_Count ------ 100 100 000 - 5776
|
||||
165 Max_Erase_Count ------ 100 100 000 - 19
|
||||
166 Min_Erase_Count ------ 100 100 000 - 2
|
||||
167 Average_Erase_Count ------ 100 100 000 - 6
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 72
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 8
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 121555
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 12
|
||||
194 Temperature_Celsius ------ 100 100 000 - 65
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 148486
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 243
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 23104
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 7005 --- Power-on Hours
|
||||
0x01 0x018 6 1141278088 --- Logical Sectors Written
|
||||
0x01 0x020 6 199416386 --- Number of Write Commands
|
||||
0x01 0x028 6 15962878 --- Logical Sectors Read
|
||||
0x01 0x030 6 289084 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 12 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 80 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/84B240A7A35D
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/84B240A7A35D
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Jan 30 19:24:21 2022 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 2999
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 15
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 65280
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 1265
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 1110
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 1231
|
||||
164 Total_Erase_Count ------ 100 100 000 - 7821
|
||||
165 Max_Erase_Count ------ 100 100 000 - 37
|
||||
166 Min_Erase_Count ------ 100 100 000 - 1
|
||||
167 Average_Erase_Count ------ 100 100 000 - 8
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 59
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 20
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 24
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 3
|
||||
194 Temperature_Celsius ------ 100 100 000 - 72
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 60166
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 999
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 31284
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2999 --- Power-on Hours
|
||||
0x01 0x018 6 3943063339 --- Logical Sectors Written
|
||||
0x01 0x020 6 107415143 --- Number of Write Commands
|
||||
0x01 0x028 6 65523355 --- Logical Sectors Read
|
||||
0x01 0x030 6 1738682 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 37 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/9D081AFAA910
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/9D081AFAA910
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Aug 8 19:44:29 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 3526
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 22
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 97735
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 1864
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 1643
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 1844
|
||||
164 Total_Erase_Count ------ 100 100 000 - 18293
|
||||
165 Max_Erase_Count ------ 100 100 000 - 26
|
||||
166 Min_Erase_Count ------ 100 100 000 - 5
|
||||
167 Average_Erase_Count ------ 100 100 000 - 20
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 47
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 29
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 534313
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 20
|
||||
194 Temperature_Celsius ------ 100 100 000 - 71
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 412188
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 570
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 73172
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 22 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3526 --- Power-on Hours
|
||||
0x01 0x018 6 1243358860 --- Logical Sectors Written
|
||||
0x01 0x020 6 410477771 --- Number of Write Commands
|
||||
0x01 0x028 6 37413189 --- Logical Sectors Read
|
||||
0x01 0x030 6 549981 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 20 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1581 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/A0FB5E98CBDD
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/A0FB5E98CBDD
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p20-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0TBD1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Sep 12 23:35:48 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 55
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 21
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 1149
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 31
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 21
|
||||
164 Total_Erase_Count ------ 100 100 000 - 128
|
||||
165 Max_Erase_Count ------ 100 100 000 - 2
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 0
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 62
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 18
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 5
|
||||
194 Temperature_Celsius ------ 100 100 000 - 49 (Min/Max 18/61)
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 1327
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 223
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 2299
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 21 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 55 --- Power-on Hours
|
||||
0x01 0x018 6 86978842 --- Logical Sectors Written
|
||||
0x01 0x020 6 3074350 --- Number of Write Commands
|
||||
0x01 0x028 6 14632035 --- Logical Sectors Read
|
||||
0x01 0x030 6 325044 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 95 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/BE05922664B5
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/BE05922664B5
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0TBD1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Aug 29 15:08:38 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 50
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 17
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 28598
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 564
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 402
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 539
|
||||
164 Total_Erase_Count ------ 100 100 000 - 5848
|
||||
165 Max_Erase_Count ------ 100 100 000 - 9
|
||||
166 Min_Erase_Count ------ 100 100 000 - 1
|
||||
167 Average_Erase_Count ------ 100 100 000 - 6
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 72
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 8
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 4
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 5
|
||||
194 Temperature_Celsius ------ 100 100 000 - 60 (Min/Max 18/75)
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 32049
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 336
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 69213
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 17 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 50 --- Power-on Hours
|
||||
0x01 0x018 6 2100368850 --- Logical Sectors Written
|
||||
0x01 0x020 6 40912716 --- Number of Write Commands
|
||||
0x01 0x028 6 22070778 --- Logical Sectors Read
|
||||
0x01 0x030 6 658133 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 85 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/C89B384880BD
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/C89B384880BD
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Aug 2 17:42:04 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 7910
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 75
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 107663
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 2058
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 1858
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 2031
|
||||
164 Total_Erase_Count ------ 100 100 000 - 4808
|
||||
165 Max_Erase_Count ------ 100 100 000 - 17
|
||||
166 Min_Erase_Count ------ 100 100 000 - 2
|
||||
167 Average_Erase_Count ------ 100 100 000 - 5
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 68
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 12
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 46
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 48
|
||||
194 Temperature_Celsius ------ 100 100 000 - 59
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 129095
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 444
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 19232
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 75 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 7910 --- Power-on Hours
|
||||
0x01 0x018 6 4165406590 --- Logical Sectors Written
|
||||
0x01 0x020 6 274082880 --- Number of Write Commands
|
||||
0x01 0x028 6 29157889 --- Logical Sectors Read
|
||||
0x01 0x030 6 697032 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 48 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 216 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/E099B9AEA4FD
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/E099B9AEA4FD
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02J0S86A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Jan 14 17:36:51 2022 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 4864
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 252
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 81957
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 1574
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 1407
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 1546
|
||||
164 Total_Erase_Count ------ 100 100 000 - 20836
|
||||
165 Max_Erase_Count ------ 100 100 000 - 40
|
||||
166 Min_Erase_Count ------ 100 100 000 - 4
|
||||
167 Average_Erase_Count ------ 100 100 000 - 22
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 68
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 12
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 37
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 243
|
||||
194 Temperature_Celsius ------ 100 100 000 - 50
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 115831
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 41292
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 83344
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 252 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4864 --- Power-on Hours
|
||||
0x01 0x018 6 3296143450 --- Logical Sectors Written
|
||||
0x01 0x020 6 154978536 --- Number of Write Commands
|
||||
0x01 0x028 6 2706174631 --- Logical Sectors Read
|
||||
0x01 0x030 6 73611312 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 243 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 13489 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/EFCE080683FC
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/EFCE080683FC
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: R0810A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Aug 15 18:17:21 2021 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 9905
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 13
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 192946
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 2600
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 2412
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 2572
|
||||
164 Total_Erase_Count ------ 100 100 000 - 8695
|
||||
165 Max_Erase_Count ------ 100 100 000 - 11
|
||||
166 Min_Erase_Count ------ 100 100 000 - 4
|
||||
167 Average_Erase_Count ------ 100 100 000 - 6
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 94
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 22
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 128
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 8
|
||||
194 Temperature_Celsius ------ 100 100 000 - 67
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 161423
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 1773
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 17390
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 13 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 9905 --- Power-on Hours
|
||||
0x01 0x018 6 1989123799 --- Logical Sectors Written
|
||||
0x01 0x020 6 149521140 --- Number of Write Commands
|
||||
0x01 0x028 6 116257015 --- Logical Sectors Read
|
||||
0x01 0x030 6 3539127 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 3026 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA230S/F6275D943BBE
Normal file
163
SSD/Transcend/TS128/TS128GMSA230S/F6275D943BBE
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA230S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: R0810A
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Aug 15 18:17:08 2021 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 9944
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 14
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 207363
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 2793
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 2613
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 2764
|
||||
164 Total_Erase_Count ------ 100 100 000 - 14509
|
||||
165 Max_Erase_Count ------ 100 100 000 - 14
|
||||
166 Min_Erase_Count ------ 100 100 000 - 5
|
||||
167 Average_Erase_Count ------ 100 100 000 - 10
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 100
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 16
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 99
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 147
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 8
|
||||
194 Temperature_Celsius ------ 100 100 000 - 67
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 178517
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 1570
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 29018
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 14 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 9944 --- Power-on Hours
|
||||
0x01 0x018 6 3109388091 --- Logical Sectors Written
|
||||
0x01 0x020 6 163607402 --- Number of Write Commands
|
||||
0x01 0x028 6 102911142 --- Logical Sectors Read
|
||||
0x01 0x030 6 2873532 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 2592 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
162
SSD/Transcend/TS128/TS128GMSA370/21C9CA926F49
Normal file
162
SSD/Transcend/TS128/TS128GMSA370/21C9CA926F49
Normal file
@@ -0,0 +1,162 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA370
|
||||
Serial Number: --
|
||||
Firmware Version: O1225G
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Feb 6 00:09:19 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 475
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 115
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 131
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 34
|
||||
164 Total_Erase_Count ------ 100 100 000 - 113117
|
||||
165 Max_Erase_Count ------ 100 100 000 - 106
|
||||
166 Min_Erase_Count ------ 100 100 000 - 3
|
||||
167 Average_Erase_Count ------ 100 100 000 - 54
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 99
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 135
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 28
|
||||
194 Temperature_Celsius ------ 100 100 000 - 44
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 257
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 106442
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 1773
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 226234
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 115 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 475 --- Power-on Hours
|
||||
0x01 0x018 6 6975821517 --- Logical Sectors Written
|
||||
0x01 0x020 6 111765744 --- Number of Write Commands
|
||||
0x01 0x028 6 116220385 --- Logical Sectors Read
|
||||
0x01 0x030 6 1935407 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 35 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 273 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA370/3347F881D63C
Normal file
163
SSD/Transcend/TS128/TS128GMSA370/3347F881D63C
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA370
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: P1225CH1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Aug 12 11:58:28 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 58
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 12
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 144
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 21
|
||||
164 Total_Erase_Count ------ 100 100 000 - 12840
|
||||
165 Max_Erase_Count ------ 100 100 000 - 16
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 6
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 4
|
||||
194 Temperature_Celsius ------ 100 100 000 - 40
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 13121
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 333
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 25680
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 12 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 58 --- Power-on Hours
|
||||
0x01 0x018 6 859917322 --- Logical Sectors Written
|
||||
0x01 0x020 6 12224519 --- Number of Write Commands
|
||||
0x01 0x028 6 21828041 --- Logical Sectors Read
|
||||
0x01 0x030 6 621545 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 105 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA370/56271C82FB91
Normal file
163
SSD/Transcend/TS128/TS128GMSA370/56271C82FB91
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA370
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: P1225CH1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Dec 27 11:34:12 2021 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 872
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 28
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 157
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 8
|
||||
164 Total_Erase_Count ------ 100 100 000 - 489684
|
||||
165 Max_Erase_Count ------ 100 100 000 - 303
|
||||
166 Min_Erase_Count ------ 100 100 000 - 202
|
||||
167 Average_Erase_Count ------ 100 100 000 - 234
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 93
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 327
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 2
|
||||
194 Temperature_Celsius ------ 100 100 000 - 54
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 653332
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 20969
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 979368
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 28 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 872 --- Power-on Hours
|
||||
0x01 0x018 6 42816788005 --- Logical Sectors Written
|
||||
0x01 0x020 6 449432226 --- Number of Write Commands
|
||||
0x01 0x028 6 1374244636 --- Logical Sectors Read
|
||||
0x01 0x030 6 17865893 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 234 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 7 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA370S/4080D0C5F8B8
Normal file
163
SSD/Transcend/TS128/TS128GMSA370S/4080D0C5F8B8
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA370S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: S0903D
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jul 10 17:33:08 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 010 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 0
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 5
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 012 - 25
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 7
|
||||
164 Total_Erase_Count ------ 100 100 000 - 30
|
||||
165 Max_Erase_Count ------ 100 100 000 - 2
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 027 - 0
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 000 - 0
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 0
|
||||
194 Temperature_Celsius ------ 100 100 000 - 56
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 1073
|
||||
196 Reallocated_Event_Count ------ 100 100 000 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 000 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 158
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 61
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 185
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 5 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 0 --- Power-on Hours
|
||||
0x01 0x018 6 10367107 --- Logical Sectors Written
|
||||
0x01 0x020 6 126562 --- Number of Write Commands
|
||||
0x01 0x028 6 4006030 --- Logical Sectors Read
|
||||
0x01 0x030 6 40688 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 29 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMSA370S/728D648B5A7F
Normal file
163
SSD/Transcend/TS128/TS128GMSA370S/728D648B5A7F
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA370S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: S0903D
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Aug 19 11:44:46 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 010 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 32
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 28
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 012 - 28
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 4
|
||||
164 Total_Erase_Count ------ 100 100 000 - 2968
|
||||
165 Max_Erase_Count ------ 100 100 000 - 8
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 027 - 4
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 000 - 0
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 8
|
||||
194 Temperature_Celsius ------ 100 100 000 - 54
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 4037
|
||||
196 Reallocated_Event_Count ------ 100 100 000 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 000 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 8563
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 572
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 18364
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 28 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 32 --- Power-on Hours
|
||||
0x01 0x018 6 561218852 --- Logical Sectors Written
|
||||
0x01 0x020 6 8670025 --- Number of Write Commands
|
||||
0x01 0x028 6 37541895 --- Logical Sectors Read
|
||||
0x01 0x030 6 1242631 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 695 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
164
SSD/Transcend/TS128/TS128GMSA370S/ECD509D479B6
Normal file
164
SSD/Transcend/TS128/TS128GMSA370S/ECD509D479B6
Normal file
@@ -0,0 +1,164 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p18-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMSA370S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: S0903D
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jun 17 22:53:32 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 010 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 57
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 19
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 012 - 25
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 7
|
||||
164 Total_Erase_Count ------ 100 100 000 - 5443
|
||||
165 Max_Erase_Count ------ 100 100 000 - 23
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 027 - 8
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 000 - 0
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 7
|
||||
194 Temperature_Celsius ------ 100 100 000 - 46
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 4098
|
||||
196 Reallocated_Event_Count ------ 100 100 000 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 000 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 21528
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 3282
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 33678
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 43 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
7 0 65535 Read_scanning was completed without error
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 19 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 57 --- Power-on Hours
|
||||
0x01 0x018 6 1410918131 --- Logical Sectors Written
|
||||
0x01 0x020 6 20390788 --- Number of Write Commands
|
||||
0x01 0x028 6 215125317 --- Logical Sectors Read
|
||||
0x01 0x030 6 4030355 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 4633 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
167
SSD/Transcend/TS128/TS128GMTS400S/2BB8FF81F98B
Normal file
167
SSD/Transcend/TS128/TS128GMTS400S/2BB8FF81F98B
Normal file
@@ -0,0 +1,167 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMTS400S
|
||||
Serial Number: --
|
||||
Firmware Version: Q0926B
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Aug 23 08:43:43 2021 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x80) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 15302
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 46
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 152
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 13
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 9
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 12
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 8
|
||||
164 Total_Erase_Count ------ 100 100 000 - 17582
|
||||
165 Max_Erase_Count ------ 100 100 000 - 59
|
||||
166 Min_Erase_Count ------ 100 100 000 - 1
|
||||
167 Average_Erase_Count ------ 100 100 000 - 33
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 97
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
187 Reported_Uncorrect ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 29
|
||||
194 Temperature_Celsius ------ 100 100 000 - 104
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 33992
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 1145
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 140656
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 128 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Completed [00% left] (0-65535)
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 46 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 15302 --- Power-on Hours
|
||||
0x01 0x018 6 2227723248 --- Logical Sectors Written
|
||||
0x01 0x020 6 63336493 --- Number of Write Commands
|
||||
0x01 0x028 6 75064017 --- Logical Sectors Read
|
||||
0x01 0x030 6 1140519 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 29 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 104 --- Current Temperature
|
||||
0x05 0x020 1 0 --- Highest Temperature
|
||||
0x05 0x028 1 0 --- Lowest Temperature
|
||||
0x05 0x058 1 85 --- Specified Maximum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 123 --- Number of Hardware Resets
|
||||
0x06 0x010 4 0 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
163
SSD/Transcend/TS128/TS128GMTS430S/BA57B50303F4
Normal file
163
SSD/Transcend/TS128/TS128GMTS430S/BA57B50303F4
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMTS430S
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: 02K0S861
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jan 8 15:17:31 2022 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 215
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 321
|
||||
148 Total_SLC_Erase_Ct ------ 100 100 000 - 5943
|
||||
149 Max_SLC_Erase_Ct ------ 100 100 000 - 103
|
||||
150 Min_SLC_Erase_Ct ------ 100 100 000 - 0
|
||||
151 Average_SLC_Erase_Ct ------ 100 100 000 - 80
|
||||
164 Total_Erase_Count ------ 100 100 000 - 558
|
||||
165 Max_Erase_Count ------ 100 100 000 - 3
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 0
|
||||
159 DRAM_1_Bit_Error_Count ------ 100 100 000 - 0
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 47
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 7
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 4
|
||||
194 Temperature_Celsius ------ 100 100 000 - 30
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 8
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 4554
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 87
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 1116
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 8 Device Statistics Notification
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 321 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 215 --- Power-on Hours
|
||||
0x01 0x018 6 298493854 --- Logical Sectors Written
|
||||
0x01 0x020 6 13164067 --- Number of Write Commands
|
||||
0x01 0x028 6 5754438 --- Logical Sectors Read
|
||||
0x01 0x030 6 144114 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 12 --- Resets Between Cmd Acceptance and Completion
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 883 --- Number of Hardware Resets
|
||||
0x06 0x018 4 8 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
165
SSD/Transcend/TS128/TS128GMTS800/DDA8B9ED0CFE
Normal file
165
SSD/Transcend/TS128/TS128GMTS800/DDA8B9ED0CFE
Normal file
@@ -0,0 +1,165 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GMTS800
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 7c3548 ...
|
||||
Firmware Version: P1225CH1
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jan 13 09:44:29 2022 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x05) Offline data collection activity
|
||||
was aborted by an interrupting command from host.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 16) The self-test routine was aborted by
|
||||
the host.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 327
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 91
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 155
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 10
|
||||
164 Total_Erase_Count ------ 100 100 000 - 25832
|
||||
165 Max_Erase_Count ------ 100 100 000 - 56
|
||||
166 Min_Erase_Count ------ 100 100 000 - 0
|
||||
167 Average_Erase_Count ------ 100 100 000 - 12
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 100
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 19
|
||||
194 Temperature_Celsius ------ 100 100 000 - 25
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 26697
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 12695
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 51664
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Abort offline test Completed without error 00% 0 -
|
||||
# 2 Short offline Self-test routine in progress 00% 0 -
|
||||
# 3 Abort offline test Aborted by host 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was aborted by an interrupting command from host
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 91 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 327 --- Power-on Hours
|
||||
0x01 0x018 6 1749631832 --- Logical Sectors Written
|
||||
0x01 0x020 6 32616184 --- Number of Write Commands
|
||||
0x01 0x028 6 832007511 --- Logical Sectors Read
|
||||
0x01 0x030 6 7737590 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 19 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1068 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
162
SSD/Transcend/TS128/TS128GSSD420K/C5CADEABC46E
Normal file
162
SSD/Transcend/TS128/TS128GSSD420K/C5CADEABC46E
Normal file
@@ -0,0 +1,162 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TS128GSSD420K
|
||||
Serial Number: --
|
||||
Firmware Version: O1225G
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jan 22 12:20:42 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours ------ 100 100 000 - 1167
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 65
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 000 - 136
|
||||
163 Initial_Bad_Block_Count ------ 100 100 000 - 29
|
||||
164 Total_Erase_Count ------ 100 100 000 - 63569
|
||||
165 Max_Erase_Count ------ 100 100 000 - 110
|
||||
166 Min_Erase_Count ------ 100 100 000 - 7
|
||||
167 Average_Erase_Count ------ 100 100 000 - 30
|
||||
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
|
||||
169 Remaining_Lifetime_Perc ------ 100 100 000 - 99
|
||||
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
||||
177 Wear_Leveling_Count ------ 100 100 050 - 79
|
||||
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
|
||||
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 24
|
||||
194 Temperature_Celsius ------ 100 100 000 - 30
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 204
|
||||
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
||||
197 Current_Pending_Sector ------ 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ------ 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
232 Available_Reservd_Space ------ 100 100 000 - 100
|
||||
241 Host_Writes_32MiB ------ 100 100 000 - 68760
|
||||
242 Host_Reads_32MiB ------ 100 100 000 - 8932
|
||||
245 TLC_Writes_32MiB ------ 100 100 000 - 127138
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 65 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1167 --- Power-on Hours
|
||||
0x01 0x018 6 4506271404 --- Logical Sectors Written
|
||||
0x01 0x020 6 146607734 --- Number of Write Commands
|
||||
0x01 0x028 6 585393134 --- Logical Sectors Read
|
||||
0x01 0x030 6 3739629 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
||||
0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 24 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 51864 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
Reference in New Issue
Block a user