mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3084, modified: 0)
This commit is contained in:
Andrey Ponomarenko
127
HDD/Fujitsu/MHT2080/MHT2080AH/1A788B3557F8
Normal file
127
HDD/Fujitsu/MHT2080/MHT2080AH/1A788B3557F8
Normal file
@@ -0,0 +1,127 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 i386] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHT
|
||||
Device Model: FUJITSU MHT2080AH
|
||||
Serial Number: --
|
||||
Firmware Version: 006C
|
||||
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-6 T13/1410D revision 3a
|
||||
Local Time is: Sun Nov 22 00:06:04 2020 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x80) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 587) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 95641
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 19988787
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 098 098 000 - 7067
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 3828
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Seconds -O--CK 080 080 000 - 10258h+56m+54s
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 2298
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 49
|
||||
193 Load_Cycle_Count -O--CK 089 089 000 - 114878
|
||||
194 Temperature_Celsius -O---K 100 090 000 - 48 (Min/Max 16/62)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 270
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 4387)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 7734
|
||||
203 Run_Out_Cancel -O---- 100 099 000 - 3732312623077
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xa1 SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
||||
157
HDD/Fujitsu/MHT2080/MHT2080BH/0D176A4FD238
Normal file
157
HDD/Fujitsu/MHT2080/MHT2080BH/0D176A4FD238
Normal file
@@ -0,0 +1,157 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHT
|
||||
Device Model: FUJITSU MHT2080BH
|
||||
Serial Number: --
|
||||
Firmware Version: 0000104A
|
||||
User Capacity: 79,925,045,760 bytes [79.9 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
|
||||
Local Time is: Thu Feb 25 19:10:45 2021 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 587) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 53) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 239112
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 23789568
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 098 098 000 - 5776
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 3713
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Seconds -O--CK 089 089 000 - 5792h+23m+25s
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 5087
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 67
|
||||
193 Load_Cycle_Count -O--CK 092 092 000 - 89983
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 31 (Min/Max 14/56)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 3975
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6894)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 3096
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 1533244668914
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 1
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 5755 hours (239 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 5e d6 40 00 Error: ICRC, ABRT at LBA = 0x00005ed6 = 24278
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 08 00 00 00 00 5e cf 40 00 00:00:08.395 WRITE DMA EXT
|
||||
25 00 00 00 08 00 00 05 43 16 8f 40 00 00:00:08.282 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 01 1f df 40 00 00:00:08.281 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 01 88 bf 40 00 00:00:08.257 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 53 0b 2f 40 00 00:00:08.238 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
||||
338
HDD/Fujitsu/MHW2120/MHW2120BH/8FC04A24088F
Normal file
338
HDD/Fujitsu/MHW2120/MHW2120BH/8FC04A24088F
Normal file
@@ -0,0 +1,338 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHW BH
|
||||
Device Model: FUJITSU MHW2120BH
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 00810013
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3b
|
||||
SATA Version is: SATA 2.5, 1.5 Gb/s
|
||||
Local Time is: Sun Feb 21 19:16:20 2021 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 578) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 82) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 150831
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 32374784
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 2748
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 2853
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 070 070 000 - 15400
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 1884
|
||||
192 Power-Off_Retract_Count -O--CK 099 099 000 - 381
|
||||
193 Load_Cycle_Count -O--CK 085 085 000 - 306675
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 14/50)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 835
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 7004)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 3573
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 2628528437675
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 18
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 18 [17] occurred at disk power-on lifetime: 10566 hours (440 days + 6 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 70 00 00 03 ad 8c b8 e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x03ad8cb8 = 61705400
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 03 00 80 00 00 03 ad 8c a8 e0 00 00:08:56.790 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8c 28 e0 00 00:08:56.357 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8b a8 e0 00 00:08:56.355 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8b 28 e0 00 00:08:56.353 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8a a8 e0 00 00:08:56.351 READ DMA EXT
|
||||
|
||||
Error 17 [16] occurred at disk power-on lifetime: 10566 hours (440 days + 6 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 70 00 00 03 ad 8c 38 e0 00 Error: ICRC, ABRT 112 sectors at LBA = 0x03ad8c38 = 61705272
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 03 00 80 00 00 03 ad 8c 28 e0 00 00:08:56.357 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8b a8 e0 00 00:08:56.355 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8b 28 e0 00 00:08:56.353 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8a a8 e0 00 00:08:56.351 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 ad 8a 28 e0 00 00:08:56.349 READ DMA EXT
|
||||
|
||||
Error 16 [15] occurred at disk power-on lifetime: 10566 hours (440 days + 6 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 10 00 00 03 b6 7e 50 e0 00 Error: ICRC, ABRT 16 sectors at LBA = 0x03b67e50 = 62291536
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 03 00 80 00 00 03 b6 7d e0 e0 00 00:04:28.756 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 b6 7d 60 e0 00 00:04:28.754 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 b6 7c e0 e0 00 00:04:28.752 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 b6 7c 60 e0 00 00:04:28.750 READ DMA EXT
|
||||
25 00 03 00 80 00 00 03 b6 7b e0 e0 00 00:04:28.748 READ DMA EXT
|
||||
|
||||
Error 15 [14] occurred at disk power-on lifetime: 10524 hours (438 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 71 00 00 05 9b 89 c7 e0 00 Error: ICRC, ABRT 113 sectors at LBA = 0x059b89c7 = 94079431
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 03 00 80 00 00 05 9b 89 b8 e0 00 06:05:02.740 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 9b 89 38 e0 00 06:05:02.673 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 9b 88 b8 e0 00 06:05:02.606 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 9b 88 38 e0 00 06:05:02.538 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 9b 87 b8 e0 00 06:05:02.471 WRITE DMA EXT
|
||||
|
||||
Error 14 [13] occurred at disk power-on lifetime: 10524 hours (438 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 01 00 00 05 8d ae 57 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x058dae57 = 93171287
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 03 00 80 00 00 05 8d ad d8 e0 00 05:56:43.210 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 8d ad 58 e0 00 05:56:43.143 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 8d ac d8 e0 00 05:56:43.076 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 8d ac 58 e0 00 05:56:43.009 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 8d ab d8 e0 00 05:56:42.942 WRITE DMA EXT
|
||||
|
||||
Error 13 [12] occurred at disk power-on lifetime: 10524 hours (438 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 21 00 00 05 87 c3 c7 e0 00 Error: ICRC, ABRT 33 sectors at LBA = 0x0587c3c7 = 92783559
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 03 00 80 00 00 05 87 c3 68 e0 00 05:53:10.654 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 87 c2 e8 e0 00 05:53:10.587 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 87 c2 68 e0 00 05:53:10.520 WRITE DMA EXT
|
||||
25 00 03 00 08 00 00 02 63 f9 98 e0 00 05:53:10.513 READ DMA EXT
|
||||
25 00 03 00 08 00 00 02 63 f9 98 e0 00 05:53:10.505 READ DMA EXT
|
||||
|
||||
Error 12 [11] occurred at disk power-on lifetime: 10524 hours (438 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 51 00 00 05 85 56 a7 e0 00 Error: ICRC, ABRT 81 sectors at LBA = 0x058556a7 = 92624551
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 03 00 80 00 00 05 85 56 78 e0 00 05:51:43.249 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 55 f8 e0 00 05:51:43.182 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 55 78 e0 00 05:51:43.115 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 54 f8 e0 00 05:51:43.048 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 54 78 e0 00 05:51:42.981 WRITE DMA EXT
|
||||
|
||||
Error 11 [10] occurred at disk power-on lifetime: 10524 hours (438 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 71 00 00 05 85 29 87 e0 00 Error: ICRC, ABRT 113 sectors at LBA = 0x05852987 = 92612999
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 03 00 80 00 00 05 85 29 78 e0 00 05:51:36.480 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 28 f8 e0 00 05:51:36.413 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 28 78 e0 00 05:51:36.346 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 27 f8 e0 00 05:51:36.279 WRITE DMA EXT
|
||||
35 00 03 00 80 00 00 05 85 27 78 e0 00 05:51:36.212 WRITE DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3655 -
|
||||
# 2 Short offline Completed without error 00% 3641 -
|
||||
# 3 Short offline Aborted by host 90% 3641 -
|
||||
# 4 Short offline Aborted by host 90% 3639 -
|
||||
# 5 Short offline Aborted by host 90% 3639 -
|
||||
# 6 Short offline Aborted by host 90% 3636 -
|
||||
# 7 Short offline Aborted by host 90% 3636 -
|
||||
# 8 Short offline Aborted by host 90% 3635 -
|
||||
# 9 Short offline Completed without error 00% 3629 -
|
||||
#10 Short offline Completed without error 00% 3629 -
|
||||
#11 Short offline Aborted by host 90% 3628 -
|
||||
#12 Short offline Completed without error 00% 3626 -
|
||||
#13 Short offline Aborted by host 90% 3625 -
|
||||
#14 Short offline Aborted by host 90% 3625 -
|
||||
#15 Short offline Aborted by host 90% 3622 -
|
||||
#16 Short offline Aborted by host 90% 3619 -
|
||||
#17 Short offline Aborted by host 90% 3619 -
|
||||
#18 Short offline Interrupted (host reset) 90% 3618 -
|
||||
#19 Short offline Completed without error 00% 3618 -
|
||||
#20 Short offline Aborted by host 90% 3618 -
|
||||
#21 Short offline Completed without error 00% 3618 -
|
||||
#22 Short offline Completed without error 00% 3617 -
|
||||
#23 Short offline Aborted by host 90% 3616 -
|
||||
#24 Short offline Aborted by host 90% 3616 -
|
||||
#25 Short offline Aborted by host 90% 3616 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 28 Celsius
|
||||
Power Cycle Min/Max Temperature: --/29 Celsius
|
||||
Lifetime Min/Max Temperature: --/50 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 128 (25)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 10 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
313
HDD/Fujitsu/MHW2160/MHW2160BH/01D827D476A5
Normal file
313
HDD/Fujitsu/MHW2160/MHW2160BH/01D827D476A5
Normal file
@@ -0,0 +1,313 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHW BH
|
||||
Device Model: FUJITSU MHW2160BH
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 0000001C
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3b
|
||||
SATA Version is: SATA 2.5, 1.5 Gb/s
|
||||
Local Time is: Thu Mar 11 10:32:54 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 649) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 92) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 079 046 - 65990
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 39452672
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 098 098 000 - 9530
|
||||
5 Reallocated_Sector_Ct PO--CK 090 090 024 - 386 (1749 251)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 1918
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 078 078 000 - 11421
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 9244
|
||||
192 Power-Off_Retract_Count -O--CK 092 092 000 - 2216
|
||||
193 Load_Cycle_Count -O--CK 093 093 000 - 156024
|
||||
194 Temperature_Celsius -O---K 100 060 000 - 34 (Min/Max -8/58)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1073
|
||||
196 Reallocated_Event_Count -O--CK 090 090 000 - 386 (9 6559)
|
||||
197 Current_Pending_Sector -O--C- 094 091 000 - 7
|
||||
198 Offline_Uncorrectable ----C- 015 015 000 - 170
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 32419
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 3728286023068
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 33876 (device log contains only the most recent 256 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 33876 [83] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 08 00 00 00 52 c1 28 e7 00 Error: UNC 8 sectors at LBA = 0x0752c128 = 122863912
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 08 00 00 00 52 c1 28 e7 00 02:34:25.050 READ DMA
|
||||
c8 00 00 00 10 00 00 00 3c c3 d8 e1 00 02:34:25.050 READ DMA
|
||||
c8 00 00 00 08 00 00 00 3c c3 c0 e1 00 02:34:25.050 READ DMA
|
||||
c8 00 00 00 08 00 00 00 3c c3 90 e1 00 02:34:25.050 READ DMA
|
||||
c8 00 00 00 08 00 00 00 3c c3 80 e1 00 02:34:25.018 READ DMA
|
||||
|
||||
Error 33875 [82] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 08 00 00 00 52 c1 28 e7 00 Error: UNC 8 sectors at LBA = 0x0752c128 = 122863912
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 08 00 00 00 52 c1 28 e7 00 02:34:20.030 READ DMA
|
||||
c8 00 00 00 08 00 00 00 52 c1 20 e7 00 02:34:20.017 READ DMA
|
||||
c8 00 00 00 08 00 00 00 52 c1 18 e7 00 02:34:20.016 READ DMA
|
||||
c8 00 00 00 08 00 00 00 52 c1 10 e7 00 02:34:20.016 READ DMA
|
||||
c8 00 00 00 08 00 00 00 52 c1 08 e7 00 02:34:20.015 READ DMA
|
||||
|
||||
Error 33874 [81] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 3a 00 00 07 52 cb c6 e0 00 Error: UNC 58 sectors at LBA = 0x0752cbc6 = 122866630
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 02 c0 00 00 07 52 c9 40 e0 00 02:34:14.625 READ DMA EXT
|
||||
ef 00 10 00 03 00 00 00 00 00 00 a0 00 02:34:14.624 SET FEATURES [Enable SATA feature]
|
||||
ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:34:14.624 SET FEATURES [Enable SATA feature]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 02:34:14.624 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
00 00 00 00 00 00 00 00 00 00 00 b0 00 02:34:14.622 NOP [Abort queued commands]
|
||||
|
||||
Error 33873 [80] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 04 8e 00 00 07 52 c4 b2 e0 00 Error: UNC 1166 sectors at LBA = 0x0752c4b2 = 122864818
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 05 40 00 00 07 52 c4 00 e0 00 02:34:09.480 READ DMA EXT
|
||||
ef 00 10 00 03 00 00 00 00 00 00 a0 00 02:34:09.480 SET FEATURES [Enable SATA feature]
|
||||
ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:34:09.480 SET FEATURES [Enable SATA feature]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 02:34:09.480 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
00 00 00 00 00 00 00 00 00 00 00 b0 00 02:34:09.478 NOP [Abort queued commands]
|
||||
|
||||
Error 33872 [79] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 02 d8 00 00 07 52 c1 28 e0 00 Error: UNC 728 sectors at LBA = 0x0752c128 = 122863912
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 04 00 00 00 07 52 c0 00 e0 00 02:34:04.503 READ DMA EXT
|
||||
25 00 00 05 10 00 00 07 52 ba f0 e0 00 02:34:04.484 READ DMA EXT
|
||||
25 00 00 06 f0 00 00 07 52 b4 00 e0 00 02:34:04.418 READ DMA EXT
|
||||
ca 00 00 00 30 00 00 00 06 dd e0 e0 00 02:34:04.418 WRITE DMA
|
||||
25 00 00 04 00 00 00 07 52 b0 00 e0 00 02:34:04.372 READ DMA EXT
|
||||
|
||||
Error 33871 [78] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 05 00 00 00 12 e4 5b e7 00 Error: UNC 5 sectors at LBA = 0x0712e45b = 118678619
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 08 00 00 00 12 e4 58 e7 00 02:29:34.950 READ DMA
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:29:34.939 FLUSH CACHE EXT
|
||||
ca 00 00 00 08 00 00 00 45 cc 08 e9 00 02:29:34.938 WRITE DMA
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:29:34.922 FLUSH CACHE EXT
|
||||
ca 00 00 00 18 00 00 00 45 cb f0 e9 00 02:29:34.918 WRITE DMA
|
||||
|
||||
Error 33870 [77] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 05 00 00 00 12 e4 5b e7 00 Error: UNC 5 sectors at LBA = 0x0712e45b = 118678619
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 08 00 00 00 12 e4 58 e7 00 02:29:29.888 READ DMA
|
||||
c8 00 00 00 08 00 00 00 12 e4 50 e7 00 02:29:29.869 READ DMA
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:29:29.858 FLUSH CACHE EXT
|
||||
ca 00 00 00 08 00 00 00 45 cb e8 e9 00 02:29:29.858 WRITE DMA
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:29:29.842 FLUSH CACHE EXT
|
||||
|
||||
Error 33869 [76] occurred at disk power-on lifetime: 11322 hours (471 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 45 00 00 00 12 e4 5b e7 00 Error: UNC 69 sectors at LBA = 0x0712e45b = 118678619
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 50 00 00 00 12 e4 50 e7 00 02:29:24.818 READ DMA
|
||||
c8 00 00 00 d8 00 00 00 12 e3 78 e7 00 02:29:24.695 READ DMA
|
||||
c8 00 00 00 58 00 00 00 12 e3 20 e7 00 02:29:24.588 READ DMA
|
||||
c8 00 00 00 48 00 00 00 12 e2 d8 e7 00 02:29:24.482 READ DMA
|
||||
c8 00 00 00 58 00 00 00 12 e2 80 e7 00 02:29:24.375 READ DMA
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 34 Celsius
|
||||
Power Cycle Min/Max Temperature: --/34 Celsius
|
||||
Lifetime Min/Max Temperature: --/58 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 128 (75)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 4943 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 20 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
166
HDD/Fujitsu/MHY2120/MHY2120BH/1A4D40123B9C
Normal file
166
HDD/Fujitsu/MHY2120/MHY2120BH/1A4D40123B9C
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHY BH
|
||||
Device Model: FUJITSU MHY2120BH
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 0000000C
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
||||
SATA Version is: SATA 2.5, 1.5 Gb/s
|
||||
Local Time is: Sat Feb 20 14:24:12 2021 +07
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 487) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 69) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 217545
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 26542080
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 4342
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 2057
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 081 081 000 - 9972
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 3191
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 35
|
||||
193 Load_Cycle_Count -O--CK 090 090 000 - 209943
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 46 (Min/Max 7/57)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 220
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6791)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 45
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 1529067995875
|
||||
240 Transfer_Error_Rate -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 8815 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 46 Celsius
|
||||
Power Cycle Min/Max Temperature: 33/53 Celsius
|
||||
Lifetime Min/Max Temperature: 7/57 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 478 (114)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 42 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 42 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
165
HDD/Fujitsu/MHY2120/MHY2120BH/6C1AB5CD62AB
Normal file
165
HDD/Fujitsu/MHY2120/MHY2120BH/6C1AB5CD62AB
Normal file
@@ -0,0 +1,165 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHY BH
|
||||
Device Model: FUJITSU MHY2120BH
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 0081000D
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
||||
SATA Version is: SATA 2.5, 1.5 Gb/s
|
||||
Local Time is: Fri Jan 22 15:07:53 2021 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 487) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 69) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 0
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 0
|
||||
4 Start_Stop_Count -O--CK 096 096 000 - 17888
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 077 077 000 - 11949
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 7714
|
||||
192 Power-Off_Retract_Count -O--CK 099 099 000 - 34395128109
|
||||
193 Load_Cycle_Count -O--CK 071 071 000 - 585331
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 31 (Min/Max 17/46)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 0
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 0
|
||||
240 Transfer_Error_Rate -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 31 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/33 Celsius
|
||||
Lifetime Min/Max Temperature: 17/46 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 478 (333)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
196
HDD/Fujitsu/MHZ2120/MHZ2120BH G2/071E0EA615A6
Normal file
196
HDD/Fujitsu/MHZ2120/MHZ2120BH G2/071E0EA615A6
Normal file
@@ -0,0 +1,196 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MHZ BH
|
||||
Device Model: FUJITSU MHZ2120BH G2
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 00000009
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Sun Feb 21 14:00:46 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 487) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 69) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 203029
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 22937600
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 3419
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 812
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 083 083 000 - 8573
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 2986
|
||||
192 Power-Off_Retract_Count -O--CK 099 099 000 - 262
|
||||
193 Load_Cycle_Count -O--CK 096 096 000 - 98804
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 11/58)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1415
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 7014)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 1
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 19428
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 1529128749273
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 1
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 7378 hours (307 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 1e 00 00 3b 00 3a 61 e0 00 Error: ICRC, ABRT 30 sectors at LBA = 0x3b003a61 = 989870689
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 20 00 00 3b 00 3a 5f e0 00 00:00:58.708 READ DMA EXT
|
||||
25 00 00 00 20 00 00 3b 00 3a 3f e0 00 00:00:58.703 READ DMA EXT
|
||||
25 00 00 00 20 00 00 3b 00 3a 1f e0 00 00:00:58.699 READ DMA EXT
|
||||
25 00 00 00 1f 00 00 3b 00 3a 00 e0 00 00:00:58.694 READ DMA EXT
|
||||
25 00 00 00 20 00 00 3a 00 3a e0 e0 00 00:00:58.690 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 35 Celsius
|
||||
Power Cycle Min/Max Temperature: 29/37 Celsius
|
||||
Lifetime Min/Max Temperature: 11/58 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 478 (127)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 36 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 36 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
193
HDD/Fujitsu/MJA2250/MJA2250BH FFS G1/D4D697516C10
Normal file
193
HDD/Fujitsu/MJA2250/MJA2250BH FFS G1/D4D697516C10
Normal file
@@ -0,0 +1,193 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MJA BH
|
||||
Device Model: FUJITSU MJA2250BH FFS G1
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 00810020
|
||||
User Capacity: 250,059,350,016 bytes [250 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
||||
SATA Version is: SATA 2.6, 1.5 Gb/s
|
||||
Local Time is: Sun Feb 14 14:46:00 2021 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 783) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 111) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 0
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 0
|
||||
4 Start_Stop_Count -O--CK 098 098 000 - 8292
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 086 086 000 - 7254
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 8236
|
||||
160 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 343650795651
|
||||
193 Load_Cycle_Count -O--CK 085 085 000 - 301700
|
||||
194 Temperature_Celsius -O---K 100 045 000 - 27 (Min/Max 14/71)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 0
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 0
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 3970
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
0xa2 GPL,SL VS 193 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 6664 -
|
||||
# 2 Extended offline Interrupted (host reset) 50% 6355 -
|
||||
# 3 Short offline Completed without error 00% 6354 -
|
||||
# 4 Short offline Aborted by host 90% 5216 -
|
||||
# 5 Short offline Completed without error 00% 4970 -
|
||||
# 6 Short offline Completed without error 00% 4917 -
|
||||
# 7 Short offline Aborted by host 90% 4917 -
|
||||
# 8 Short offline Aborted by host 90% 4917 -
|
||||
# 9 Short offline Aborted by host 90% 4917 -
|
||||
#10 Short offline Aborted by host 90% 4917 -
|
||||
#11 Short offline Aborted by host 90% 4917 -
|
||||
#12 Short offline Aborted by host 90% 4916 -
|
||||
#13 Short offline Aborted by host 90% 4916 -
|
||||
#14 Short offline Aborted by host 90% 4916 -
|
||||
#15 Short offline Aborted by host 90% 4916 -
|
||||
#16 Short offline Aborted by host 90% 4916 -
|
||||
#17 Short offline Aborted by host 90% 4916 -
|
||||
#18 Short offline Aborted by host 90% 4916 -
|
||||
#19 Short offline Aborted by host 90% 4916 -
|
||||
#20 Short offline Aborted by host 90% 4915 -
|
||||
#21 Short offline Aborted by host 90% 4915 -
|
||||
#22 Short offline Aborted by host 90% 4915 -
|
||||
#23 Short offline Aborted by host 90% 4915 -
|
||||
#24 Short offline Aborted by host 90% 4915 -
|
||||
#25 Short offline Aborted by host 90% 4915 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 27 Celsius
|
||||
Power Cycle Min/Max Temperature: 20/28 Celsius
|
||||
Lifetime Min/Max Temperature: 14/71 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 478 (257)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
169
HDD/Fujitsu/MJA2250/MJA2250BH G2/327F52672D26
Normal file
169
HDD/Fujitsu/MJA2250/MJA2250BH G2/327F52672D26
Normal file
@@ -0,0 +1,169 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MJA BH
|
||||
Device Model: FUJITSU MJA2250BH G2
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 0084001C
|
||||
User Capacity: 250,059,350,016 bytes [250 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Sun Jan 31 12:30:15 2021 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 783) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 111) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 63727
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 35258368
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 0
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 1846
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2100 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 2257
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 093 093 000 - 3871
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 1386
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 12
|
||||
193 Load_Cycle_Count -O--CK 097 097 000 - 75882
|
||||
194 Temperature_Celsius -O---K 100 080 000 - 37 (Min/Max 10/64)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 10031
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 14383)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 9252
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 429497450062
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 167 -
|
||||
# 2 Vendor (0x50) Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 37 Celsius
|
||||
Power Cycle Min/Max Temperature: 17/41 Celsius
|
||||
Lifetime Min/Max Temperature: 10/64 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 478 (472)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 762 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
166
HDD/Fujitsu/MJA2320/MJA2320BH G2/93E34207AD9F
Normal file
166
HDD/Fujitsu/MJA2320/MJA2320BH G2/93E34207AD9F
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Fujitsu MJA BH
|
||||
Device Model: FUJITSU MJA2320BH G2
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 00000e ...
|
||||
Firmware Version: 00000018
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 3f
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Sun Dec 27 06:16:22 2020 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 1009) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 143) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 111737
|
||||
2 Throughput_Performance P-S--- 100 100 030 - 47382528
|
||||
3 Spin_Up_Time PO---- 100 100 025 - 1
|
||||
4 Start_Stop_Count -O--CK 099 099 000 - 856
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2100 0)
|
||||
7 Seek_Error_Rate POSR-- 100 100 047 - 3665
|
||||
8 Seek_Time_Performance P-S--- 100 100 019 - 0
|
||||
9 Power_On_Hours -O--CK 092 092 000 - 4407
|
||||
10 Spin_Retry_Count PO--C- 100 100 020 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 852
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 24
|
||||
193 Load_Cycle_Count -O--CK 097 097 000 - 70590
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 16/50)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 2021
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 16094)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
||||
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 25109
|
||||
203 Run_Out_Cancel -O---- 100 100 000 - 2628564550556
|
||||
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 2 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 3071 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 24/35 Celsius
|
||||
Lifetime Min/Max Temperature: 16/50 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/65 Celsius
|
||||
Temperature History Size (Index): 478 (272)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 12 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 10 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
|
||||
@@ -17,16 +17,25 @@ Please take all columns into account when reading the table. Pay attention on th
|
||||
number of tested samples and power-on days. Simultaneous high values of both MTBF
|
||||
and errors are possible if only rare drives in the subset encounter errors.
|
||||
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
|
||||
| MFG | Model | Size | Samples | Days | Err | MTBF |
|
||||
|-----------|--------------------|--------|---------|-------|-------|--------|
|
||||
| Fujitsu | MJA2160BH FFS G1 | 160 GB | 1 | 707 | 0 | 1.94 |
|
||||
| Fujitsu | MHW2120BH | 120 GB | 1 | 641 | 0 | 1.76 |
|
||||
| Fujitsu | MJA2160BH G2 | 160 GB | 1 | 633 | 0 | 1.74 |
|
||||
| Fujitsu | MHY2120BH | 120 GB | 2 | 456 | 0 | 1.25 |
|
||||
| Fujitsu | MHT2080AH | 80 GB | 1 | 427 | 0 | 1.17 |
|
||||
| Fujitsu | MHZ2120BH G2 | 120 GB | 1 | 357 | 0 | 0.98 |
|
||||
| Fujitsu | MJA2250BH FFS G1 | 250 GB | 1 | 302 | 0 | 0.83 |
|
||||
| Fujitsu | MHT2080BH | 80 GB | 1 | 241 | 0 | 0.66 |
|
||||
| Fujitsu | MHZ2320BH FFS G1 | 320 GB | 1 | 203 | 0 | 0.56 |
|
||||
| Fujitsu | MJA2320BH G2 | 320 GB | 1 | 183 | 0 | 0.50 |
|
||||
| Fujitsu | MJA2250BH G2 | 250 GB | 1 | 161 | 0 | 0.44 |
|
||||
| Fujitsu | MHS2040AT D | 40 GB | 1 | 1334 | 37 | 0.10 |
|
||||
| Fujitsu | MHW2160BH | 160 GB | 1 | 475 | 957 | 0.00 |
|
||||
|
||||
HDD by Family
|
||||
-------------
|
||||
@@ -35,12 +44,15 @@ Please take all columns into account when reading the table. Pay attention on th
|
||||
number of tested samples and power-on days. Simultaneous high values of both MTBF
|
||||
and errors are possible if only rare drives in the subset encounter errors.
|
||||
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
|
||||
| MFG | Family | Models | Samples | Days | Err | MTBF |
|
||||
|-----------|------------------------|--------|---------|-------|-------|--------|
|
||||
| Fujitsu | MJA BH | 2 | 2 | 670 | 0 | 1.84 |
|
||||
| Fujitsu | MHZ BH | 1 | 1 | 203 | 0 | 0.56 |
|
||||
| Fujitsu | MHY BH | 1 | 2 | 456 | 0 | 1.25 |
|
||||
| Fujitsu | MJA BH | 5 | 5 | 397 | 0 | 1.09 |
|
||||
| Fujitsu | MHT | 2 | 2 | 334 | 0 | 0.92 |
|
||||
| Fujitsu | MHW BH | 2 | 2 | 558 | 479 | 0.88 |
|
||||
| Fujitsu | MHZ BH | 2 | 2 | 280 | 0 | 0.77 |
|
||||
| Fujitsu | MHS AT | 1 | 1 | 1334 | 37 | 0.10 |
|
||||
|
||||
Reference in New Issue
Block a user