mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3084, modified: 0)
This commit is contained in:
Andrey Ponomarenko
278
HDD/Seagate/ST3100/ST31000333AS/1CF48D13EE2B
Normal file
278
HDD/Seagate/ST3100/ST31000333AS/1CF48D13EE2B
Normal file
@@ -0,0 +1,278 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Barracuda 7200.11
|
||||
Device Model: ST31000333AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: SD35
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Fri Mar 5 06:07:11 2021 EST
|
||||
|
||||
==> WARNING: There are known problems with these drives,
|
||||
see the following Seagate web pages:
|
||||
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
|
||||
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
|
||||
http://knowledge.seagate.com/articles/en_US/FAQ/207957en
|
||||
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 625) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 208) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x103b) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 118 099 006 - 182218205
|
||||
3 Spin_Up_Time PO---- 094 091 000 - 0
|
||||
4 Start_Stop_Count -O--CK 090 090 020 - 10250
|
||||
5 Reallocated_Sector_Ct PO--CK 099 099 036 - 78
|
||||
7 Seek_Error_Rate POSR-- 083 060 030 - 232827456
|
||||
9 Power_On_Hours -O--CK 092 092 000 - 7586
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 81
|
||||
12 Power_Cycle_Count -O--CK 092 037 020 - 8909
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 095 095 000 - 5
|
||||
188 Command_Timeout -O--CK 100 098 000 - 17182228567
|
||||
189 High_Fly_Writes -O-RCK 001 001 000 - 2202
|
||||
190 Airflow_Temperature_Cel -O---K 066 044 045 Past 34 (0 40 34 32 0)
|
||||
194 Temperature_Celsius -O---K 034 056 000 - 34 (0 10 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 045 021 000 - 182218205
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2819 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 5
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 5 [4] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:33.602 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:29.579 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:29.579 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
|
||||
25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
|
||||
25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:21.573 READ LOG EXT
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
|
||||
25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:21.573 READ LOG EXT
|
||||
60 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:17.873 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 45 00 b3 10 40 00 00:02:17.870 READ FPDMA QUEUED
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:17.873 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 45 00 b3 10 40 00 00:02:17.870 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 5a 00 b3 40 40 00 00:02:17.864 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 44 00 b3 70 40 00 00:02:17.864 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 32 00 b4 a0 40 00 00:02:17.864 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 7330 -
|
||||
# 2 Extended offline Aborted by host 90% 7330 -
|
||||
# 3 Short offline Completed without error 00% 6773 -
|
||||
# 4 Extended offline Interrupted (host reset) 00% 6074 -
|
||||
# 5 Short offline Aborted by host 90% 1772 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 34 Celsius
|
||||
Power Cycle Min/Max Temperature: 32/34 Celsius
|
||||
Lifetime Min/Max Temperature: 10/56 Celsius
|
||||
Under/Over Temperature Limit Count: 0/24
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/ 0 Celsius
|
||||
Min/Max Temperature Limit: 0/ 0 Celsius
|
||||
Temperature History Size (Index): 128 (21)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user