mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3084, modified: 0)
This commit is contained in:
Andrey Ponomarenko
255
HDD/Seagate/ST9808/ST980816AS/B5F2569B4248
Normal file
255
HDD/Seagate/ST9808/ST980816AS/B5F2569B4248
Normal file
@@ -0,0 +1,255 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p15-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: ST980816AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.AAL
|
||||
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Tue Apr 20 11:35:02 2021 IST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 426) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x53) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 84) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0
|
||||
3 Spin_Up_Time PO---- 099 099 000 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 863
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2
|
||||
7 Seek_Error_Rate POSR-- 087 060 030 - 637696743
|
||||
9 Power_On_Hours -O--CK 088 088 000 - 10715
|
||||
10 Spin_Retry_Count PO--C- 100 100 034 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 020 - 1034
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 492
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 062 040 045 Past 38 (Min/Max 37/38)
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1048
|
||||
193 Load_Cycle_Count -O--CK 001 001 000 - 567449
|
||||
194 Temperature_Celsius -O---K 038 060 000 - 38 (0 17 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 082 060 000 - 92699004
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 SL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 SL R/O 1 NCQ Command Error log
|
||||
0x11 SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 SL R/O 1 Write stream error log
|
||||
0x22 SL R/O 1 Read stream error log
|
||||
0x23 SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xa0 SL VS 1 Device vendor specific log
|
||||
0xa1 SL VS 20 Device vendor specific log
|
||||
0xa2 SL VS 101 Device vendor specific log
|
||||
0xa8 SL VS 20 Device vendor specific log
|
||||
0xa9 SL VS 1 Device vendor specific log
|
||||
0xe0 SL R/W 1 SCT Command/Status
|
||||
0xe1 SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 950 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 950 occurred at disk power-on lifetime: 6945 hours (289 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 df 99 08 e0 Error: UNC at LBA = 0x000899df = 563679
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 df 99 08 e0 00 00:38:55.903 READ DMA
|
||||
27 00 00 00 00 00 e0 00 00:38:55.903 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 00 00 00 a0 00 00:38:55.901 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 00 00:38:51.166 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 e0 00 00:38:51.166 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 949 occurred at disk power-on lifetime: 6945 hours (289 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 df 99 08 e0 Error: UNC at LBA = 0x000899df = 563679
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 df 99 08 e0 00 00:38:46.427 READ DMA
|
||||
27 00 00 00 00 00 e0 00 00:38:46.426 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 00 00 00 a0 00 00:38:46.426 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 00 00:38:51.166 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 e0 00 00:38:51.166 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 948 occurred at disk power-on lifetime: 6945 hours (289 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 df 99 08 e0 Error: UNC at LBA = 0x000899df = 563679
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 df 99 08 e0 00 00:38:46.427 READ DMA
|
||||
27 00 00 00 00 00 e0 00 00:38:46.426 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 00 00 00 a0 00 00:38:46.426 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 00 00:38:46.426 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 e0 00 00:38:46.424 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 947 occurred at disk power-on lifetime: 6945 hours (289 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 df 99 08 e0 Error: UNC at LBA = 0x000899df = 563679
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 df 99 08 e0 00 00:38:41.686 READ DMA
|
||||
27 00 00 00 00 00 e0 00 00:38:36.951 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 00 00 00 a0 00 00:38:36.950 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 00 00:38:36.949 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 e0 00 00:38:36.949 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 946 occurred at disk power-on lifetime: 6945 hours (289 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 df 99 08 e0 Error: UNC at LBA = 0x000899df = 563679
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 df 99 08 e0 00 00:38:32.223 READ DMA
|
||||
27 00 00 00 00 00 e0 00 00:38:36.951 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 00 00 00 a0 00 00:38:36.950 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 00 00:38:36.949 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 e0 00 00:38:36.949 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 521 (0x0209)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 38 Celsius
|
||||
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
||||
Lifetime Min/Max Temperature: --/ 0 Celsius
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
Reference in New Issue
Block a user