Update of reports (new: 3084, modified: 0)

HDD/WDC/WD2000/WD2000JB-00FUA0/ED22B32BC4CC

@@ -0,0 +1,114 @@
+smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p12-HBSD amd64] (local build)
+Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
+
+=== START OF INFORMATION SECTION ===
+Model Family:     Western Digital Caviar SE
+Device Model:     WDC WD2000JB-00FUA0
+Serial Number:    --
+Firmware Version: 15.05R15
+User Capacity:    200,049,647,616 bytes [200 GB]
+Sector Size:      512 bytes logical/physical
+Device is:        In smartctl database [for details use: -P show]
+ATA Version is:   ATA/ATAPI-6 (minor revision not indicated)
+Local Time is:    Tue Jan 19 21:23:59 2021 CET
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+AAM level is:     254 (maximum performance), recommended: 128
+APM feature is:   Unavailable
+Rd look-ahead is: Enabled
+Write cache is:   Enabled
+DSN feature is:   Unavailable
+ATA Security is:  Disabled, NOT FROZEN [SEC1]
+Wt Cache Reorder: Unavailable
+
+=== START OF READ SMART DATA SECTION ===
+SMART overall-health self-assessment test result: PASSED
+
+General SMART Values:
+Offline data collection status:  (0x84)	Offline data collection activity
+					was suspended by an interrupting command from host.
+					Auto Offline Data Collection: Enabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever 
+					been run.
+Total time to complete Offline 
+data collection: 		( 6325) seconds.
+Offline data collection
+capabilities: 			 (0x79) SMART execute Offline immediate.
+					No Auto Offline data collection support.
+					Suspend Offline collection upon new
+					command.
+					Offline surface scan supported.
+					Self-test supported.
+					Conveyance Self-test supported.
+					Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					No General Purpose Logging support.
+Short self-test routine 
+recommended polling time: 	 (   2) minutes.
+Extended self-test routine
+recommended polling time: 	 (  81) minutes.
+Conveyance self-test routine
+recommended polling time: 	 (   5) minutes.
+
+SMART Attributes Data Structure revision number: 16
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
+  1 Raw_Read_Error_Rate     PO-R--   200   200   051    -    0
+  3 Spin_Up_Time            POS---   108   106   021    -    5125
+  4 Start_Stop_Count        -O--CK   095   095   040    -    5241
+  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
+  7 Seek_Error_Rate         PO-R--   200   200   051    -    0
+  9 Power_On_Hours          -O--CK   067   067   000    -    24575
+ 10 Spin_Retry_Count        PO--C-   100   100   051    -    0
+ 11 Calibration_Retry_Count PO--C-   100   100   051    -    0
+ 12 Power_Cycle_Count       -O--CK   096   096   000    -    4854
+194 Temperature_Celsius     -O---K   111   253   000    -    39
+196 Reallocated_Event_Count -O--CK   200   200   000    -    0
+197 Current_Pending_Sector  -O--C-   200   200   000    -    0
+198 Offline_Uncorrectable   -O--C-   200   200   000    -    0
+199 UDMA_CRC_Error_Count    -O-R--   200   253   000    -    0
+200 Multi_Zone_Error_Rate   P--R--   200   155   051    -    0
+                            ||||||_ K auto-keep
+                            |||||__ C event count
+                            ||||___ R error rate
+                            |||____ S speed/performance
+                            ||_____ O updated online
+                            |______ P prefailure warning
+
+Read SMART Log Directory failed: Input/output error
+
+General Purpose Log Directory not supported
+
+SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
+
+SMART Error Log Version: 1
+No Errors Logged
+
+SMART Extended Self-test Log (GP Log 0x07) not supported
+
+SMART Self-test log structure revision number 1
+No self-tests have been logged.  [To run self-tests, use: smartctl -t]
+
+SMART Selective self-test log data structure revision number 1
+ SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+    1        0        0  Not_testing
+    2        0        0  Not_testing
+    3        0        0  Not_testing
+    4        0        0  Not_testing
+    5        0        0  Not_testing
+Selective self-test flags (0x0):
+  After scanning selected spans, do NOT read-scan remainder of disk.
+If Selective self-test is pending on power-up, resume after 0 minute delay.
+
+SCT Commands not supported
+
+Device Statistics (GP/SMART Log 0x04) not supported
+
+Pending Defects log (GP Log 0x0c) not supported
+
+SATA Phy Event Counters (GP Log 0x11) not supported
+