mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3084, modified: 0)
This commit is contained in:
63
SSD/KingSpec/KSD-PA25/KSD-PA25.6-032MS/BAD17B8B4DC9
Normal file
63
SSD/KingSpec/KSD-PA25/KSD-PA25.6-032MS/BAD17B8B4DC9
Normal file
@@ -0,0 +1,63 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: KingSpec KSD-PA25.6-032MS
|
||||
Serial Number: --
|
||||
Firmware Version: 20140702
|
||||
User Capacity: 31,937,527,808 bytes [31.9 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
Local Time is: Sat Feb 13 09:38:15 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x00) Offline data collection not supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x00) Error logging NOT supported.
|
||||
No General Purpose Logging support.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x0000 100 100 050 Old_age Offline - 0
|
||||
5 Reallocated_Sector_Ct 0x0000 100 100 050 Old_age Offline - 0
|
||||
12 Power_Cycle_Count 0x0000 100 100 050 Old_age Offline - 70
|
||||
160 Uncorrectable_Error_Cnt 0x0000 100 100 050 Old_age Offline - 0
|
||||
161 Valid_Spare_Block_Cnt 0x0000 100 100 050 Old_age Offline - 176
|
||||
162 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 162
|
||||
163 Initial_Bad_Block_Count 0x0000 100 100 050 Old_age Offline - 26
|
||||
164 Total_Erase_Count 0x0000 100 100 050 Old_age Offline - 43650
|
||||
165 Max_Erase_Count 0x0000 100 100 050 Old_age Offline - 74
|
||||
166 Min_Erase_Count 0x0000 100 100 050 Old_age Offline - 1
|
||||
167 Average_Erase_Count 0x0000 100 100 050 Old_age Offline - 20
|
||||
192 Power-Off_Retract_Count 0x0000 100 100 050 Old_age Offline - 0
|
||||
194 Temperature_Celsius 0x0000 100 100 050 Old_age Offline - 36 (Min/Max 28/57)
|
||||
195 Hardware_ECC_Recovered 0x0000 100 100 050 Old_age Offline - 95
|
||||
196 Reallocated_Event_Count 0x0000 100 100 050 Old_age Offline - 3
|
||||
198 Offline_Uncorrectable 0x0000 100 100 050 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
|
||||
241 Host_Writes_32MiB 0x0000 100 100 050 Old_age Offline - 3562
|
||||
242 Host_Reads_32MiB 0x0000 100 100 050 Old_age Offline - 1494
|
||||
|
||||
SMART Error Log not supported
|
||||
|
||||
SMART Self-test Log not supported
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
93
SSD/KingSpec/KSD-PA25/KSD-PA25.6-128MS/7BD221E9A0AE
Normal file
93
SSD/KingSpec/KSD-PA25/KSD-PA25.6-128MS/7BD221E9A0AE
Normal file
@@ -0,0 +1,93 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p4 i386] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: KingSpec KSD-PA25.6-128MS
|
||||
Serial Number: --
|
||||
Firmware Version: 20131216
|
||||
User Capacity: 126,963,679,232 bytes [126 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Unavailable
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
Local Time is: Mon Mar 8 16:36:01 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Unavailable
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x00) Offline data collection not supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x00) Error logging NOT supported.
|
||||
No General Purpose Logging support.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate ------ 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O---- 100 100 050 - 0
|
||||
12 Power_Cycle_Count ------ 100 100 050 - 81
|
||||
160 Uncorrectable_Error_Cnt ------ 100 100 050 - 0
|
||||
161 Valid_Spare_Block_Cnt ------ 100 100 050 - 275
|
||||
162 Unknown_Attribute ------ 100 100 050 - 230
|
||||
163 Initial_Bad_Block_Count ------ 100 100 050 - 4
|
||||
164 Total_Erase_Count ------ 100 100 050 - 49549
|
||||
165 Max_Erase_Count ------ 100 100 050 - 67
|
||||
166 Min_Erase_Count ------ 100 100 050 - 0
|
||||
167 Average_Erase_Count ------ 100 100 050 - 12
|
||||
192 Power-Off_Retract_Count ------ 100 100 050 - 0
|
||||
194 Temperature_Celsius ------ 100 100 000 - 74 (Min/Max 41/75)
|
||||
195 Hardware_ECC_Recovered ------ 100 100 050 - 0
|
||||
196 Reallocated_Event_Count ------ 100 100 050 - 0
|
||||
198 Offline_Uncorrectable ------ 000 000 000 - 0
|
||||
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
||||
241 Host_Writes_32MiB -O--CK 100 100 050 - 10856
|
||||
242 Host_Reads_32MiB -O--CK 100 100 050 - 7908
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
Read SMART Log Directory failed: Input/output error
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log not supported
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test Log not supported
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
178
SSD/KingSpec/KSD-SA25/KSD-SA25.7-008MJ/5F3D87A4638F
Normal file
178
SSD/KingSpec/KSD-SA25/KSD-SA25.7-008MJ/5F3D87A4638F
Normal file
@@ -0,0 +1,178 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: KingSpec KSD-SA25.7-008MJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: 1.094.12
|
||||
User Capacity: 8,012,390,400 bytes [8.01 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Wed Dec 30 00:50:48 2020 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 32) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
SCT capabilities: (0x0039) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--- 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
|
||||
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 118
|
||||
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 27
|
||||
167 Unknown_Attribute -O---K 100 100 000 - 0
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 2
|
||||
169 Unknown_Attribute PO--C- 099 099 010 - 393222
|
||||
170 Unknown_Attribute PO--C- 100 100 010 - 0
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--C- 199 199 000 - 4295426052
|
||||
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 34
|
||||
187 Reported_Uncorrect -O--CK 000 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 21
|
||||
194 Temperature_Celsius -O---K 075 075 030 - 25 (0 60 0 30 0)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
231 Temperature_Celsius PO--CK 100 100 005 - 0
|
||||
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 53542327
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 6505129
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 0 Celsius
|
||||
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
||||
Lifetime Min/Max Temperature: --/ 0 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (228)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 70 (7.0 seconds)
|
||||
Write: 70 (7.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 27 --- Lifetime Power-On Resets
|
||||
0x01 0x018 6 52500039 --- Logical Sectors Written
|
||||
0x01 0x020 6 1029327 --- Number of Write Commands
|
||||
0x01 0x028 6 6456233 --- Logical Sectors Read
|
||||
0x01 0x030 6 222096 --- Number of Read Commands
|
||||
0x01 0x038 6 424800000 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 2 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
|
||||
|
||||
|
110
SSD/KingSpec/KSD-SA25/KSD-SA25.7-016MJ/D7B82761C18B
Normal file
110
SSD/KingSpec/KSD-SA25/KSD-SA25.7-016MJ/D7B82761C18B
Normal file
@@ -0,0 +1,110 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: KingSpec KSD-SA25.7-016MJ
|
||||
Serial Number: --
|
||||
Firmware Version: SVN484bs
|
||||
User Capacity: 16,013,942,784 bytes [16.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Thu Feb 18 16:36:49 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Read SCT Status failed: Input/output error
|
||||
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Total time to complete Offline
|
||||
data collection: ( 32) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x0b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
No Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x00) Error logging NOT supported.
|
||||
No General Purpose Logging support.
|
||||
SCT capabilities: (0x0039) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--- 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
|
||||
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 11323
|
||||
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 117
|
||||
167 Unknown_Attribute -O---K 100 100 000 - 0
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 5
|
||||
169 Unknown_Attribute PO--C- 100 100 010 - 131072
|
||||
170 Unknown_Attribute PO--C- 100 100 010 - 0
|
||||
173 Unknown_Attribute -O--C- 121 121 000 - 128321379
|
||||
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 0
|
||||
194 Temperature_Celsius PO---K 100 100 030 - 40 (Min/Max 30/60)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
Read SMART Log Directory failed: Input/output error
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log not supported
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test Log not supported
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
Read SCT Status failed: Input/output error
|
||||
|
||||
Read SCT Status failed: Input/output error
|
||||
SCT (Get) Error Recovery Control command failed
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Input/output error
|
||||
Read SATA Phy Event Counters failed
|
||||
|
161
SSD/KingSpec/MT/MT-128/5CAC005FA9E1
Normal file
161
SSD/KingSpec/MT/MT-128/5CAC005FA9E1
Normal file
@@ -0,0 +1,161 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p12-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: MT-128
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: 1.00
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Jan 20 20:25:48 2021 EET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (65535) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x79) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 6) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 8330
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 14
|
||||
160 Unknown_Attribute ------ 100 100 000 - 0
|
||||
161 Unknown_Attribute ------ 100 100 000 - 0
|
||||
163 Unknown_Attribute ------ 100 100 000 - 0
|
||||
164 Unknown_Attribute ------ 100 100 000 - 11885
|
||||
165 Unknown_Attribute ------ 100 100 000 - 49
|
||||
166 Unknown_Attribute ------ 100 100 000 - 0
|
||||
167 Unknown_Attribute ------ 100 100 000 - 24
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 11
|
||||
194 Temperature_Celsius ------ 100 100 000 - 33
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 24178
|
||||
196 Reallocated_Event_Count ------ 100 100 000 - 0
|
||||
241 Total_LBAs_Written ------ 100 100 000 - 36363
|
||||
242 Total_LBAs_Read ------ 100 100 000 - 351
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 14 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 8330 --- Power-on Hours
|
||||
0x01 0x018 6 2383125614 --- Logical Sectors Written
|
||||
0x01 0x028 6 23068712 --- Logical Sectors Read
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x020 1 33 --- Highest Temperature
|
||||
0x05 0x028 1 33 --- Lowest Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 2 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
188
SSD/KingSpec/MT/MT-128/70347165BE50
Normal file
188
SSD/KingSpec/MT/MT-128/70347165BE50
Normal file
@@ -0,0 +1,188 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p12-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: MT-128
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: SN05872
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Apr 19 20:06:58 2021 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 20
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--- 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
|
||||
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 436
|
||||
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 78
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
169 Unknown_Attribute PO--C- 095 095 010 - 1048599
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--C- 200 200 000 - 25771311115
|
||||
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 362
|
||||
187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 32
|
||||
194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50)
|
||||
199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 6
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 23
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 11
|
||||
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
210 Unknown_Attribute -O--CK 200 200 000 - 39
|
||||
211 Unknown_Attribute -O--CK 200 200 000 - 12
|
||||
231 Unknown_SSD_Attribute PO---K 100 100 005 - 0
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 835
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 19
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: ? Celsius
|
||||
Power Cycle Min/Max Temperature: ?/ ? Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (176)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 78 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 436 --- Power-on Hours
|
||||
0x01 0x018 6 1752808623 --- Logical Sectors Written
|
||||
0x01 0x020 6 46817590 --- Number of Write Commands
|
||||
0x01 0x028 6 40371761 --- Logical Sectors Read
|
||||
0x01 0x030 6 946377 --- Number of Read Commands
|
||||
0x01 0x038 6 400998197828 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 3 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
166
SSD/KingSpec/MT/MT-128/9F5D20539C7A
Normal file
166
SSD/KingSpec/MT/MT-128/9F5D20539C7A
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: MT-128
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: T170810a
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Feb 18 01:18:42 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 66) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0039) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 4599
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 716
|
||||
167 Unknown_Attribute -O---K 100 100 000 - 0
|
||||
168 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
169 Unknown_Attribute -O--CK 100 100 010 - 0
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--CK 200 200 000 - 8593801238
|
||||
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 140
|
||||
187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 561
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 59
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 22
|
||||
231 Temperature_Celsius PO---K 100 100 005 - 0
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 1757452301
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 988069770
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 13618555
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/40 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (427)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
188
SSD/KingSpec/MT/MT-128/A0C428A9E47A
Normal file
188
SSD/KingSpec/MT/MT-128/A0C428A9E47A
Normal file
@@ -0,0 +1,188 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p13-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: MT-128
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: SN05872
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Mar 5 11:48:23 2021 -04
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 20
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--- 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
|
||||
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 15
|
||||
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 18
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
169 Unknown_Attribute PO--C- 098 098 010 - 393227
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--C- 200 200 000 - 4295098369
|
||||
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 372
|
||||
187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 12
|
||||
194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50)
|
||||
199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
210 Unknown_Attribute -O--CK 200 200 000 - 10
|
||||
211 Unknown_Attribute -O--CK 200 200 000 - 2
|
||||
231 Unknown_SSD_Attribute PO---K 100 100 005 - 0
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 19
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 4
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/30 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (41)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 18 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 15 --- Power-on Hours
|
||||
0x01 0x018 6 39898625 --- Logical Sectors Written
|
||||
0x01 0x020 6 529142 --- Number of Write Commands
|
||||
0x01 0x028 6 8798348 --- Logical Sectors Read
|
||||
0x01 0x030 6 250205 --- Number of Read Commands
|
||||
0x01 0x038 6 12939263188 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
187
SSD/KingSpec/NT/NT-128/E82632038B4F
Normal file
187
SSD/KingSpec/NT/NT-128/E82632038B4F
Normal file
@@ -0,0 +1,187 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p15-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: JMicron/Maxiotek based SSDs
|
||||
Device Model: NT-128
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: T181222
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Apr 10 17:27:33 2021 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 2
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 21
|
||||
167 Unknown_JMF_Attribute -O---K 100 100 000 - 0
|
||||
168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0
|
||||
169 Unknown_JMF_Attribute PO--C- 097 097 010 - 1966090
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Erase_Count -O--C- 200 200 000 - 1 2 1
|
||||
175 Bad_Cluster_Table_Count -O---K 100 100 010 - 0
|
||||
177 Wear_Leveling_Count -O--C- 100 100 000 - 0
|
||||
180 Unknown_JMF_Attribute PO--CK 100 100 000 - 1242
|
||||
187 Unknown_JMF_Attribute -O--CK 100 000 000 - 0
|
||||
192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 19
|
||||
194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50)
|
||||
199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
||||
210 Unknown_Attribute -O--CK 200 200 000 - 5
|
||||
211 Unknown_Attribute -O--CK 200 200 000 - 3
|
||||
231 Unknown_JMF_Attribute PO---K 100 100 005 - 0
|
||||
233 Unknown_JMF_Attribute -O--CK 100 100 000 - 43767296
|
||||
234 Unknown_JMF_Attribute -O--CK 100 100 000 - 206625
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 15689684
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 2705659
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/30 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (245)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 21 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2 --- Power-on Hours
|
||||
0x01 0x018 6 15689684 --- Logical Sectors Written
|
||||
0x01 0x020 6 249295 --- Number of Write Commands
|
||||
0x01 0x028 6 2705659 --- Logical Sectors Read
|
||||
0x01 0x030 6 76677 --- Number of Read Commands
|
||||
0x01 0x038 6 10032500 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
148
SSD/KingSpec/NT/NT-256/3D1AECF72356
Normal file
148
SSD/KingSpec/NT/NT-256/3D1AECF72356
Normal file
@@ -0,0 +1,148 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: JMicron/Maxiotek based SSDs
|
||||
Device Model: NT-256
|
||||
Serial Number: --
|
||||
Firmware Version: S0527A
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Jan 26 10:07:09 2021 NZDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 1035
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 586
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 13
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 12597
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 31
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 13
|
||||
167 Unknown_JMF_Attribute -O--CK 100 100 050 - 25
|
||||
168 SATA_Phy_Error_Count -O--CK 100 100 050 - 7000
|
||||
169 Unknown_JMF_Attribute -O--CK 100 100 050 - 100
|
||||
175 Bad_Cluster_Table_Count -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 42
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 50
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 77
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 62046
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 27618
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 25362
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 586 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1035 --- Power-on Hours
|
||||
0x01 0x018 6 4066294766 --- Logical Sectors Written
|
||||
0x01 0x020 6 13428 --- Number of Write Commands
|
||||
0x01 0x028 6 1810011001 --- Logical Sectors Read
|
||||
0x01 0x030 6 17251 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 6 R_ERR response for non-data FIS
|
||||
0x000a 4 9 Device-to-host register FISes sent due to a COMRESET
|
||||
|
146
SSD/KingSpec/NT/NT-256/8C22BA71548E
Normal file
146
SSD/KingSpec/NT/NT-256/8C22BA71548E
Normal file
@@ -0,0 +1,146 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: NT-256
|
||||
Serial Number: --
|
||||
Firmware Version: T0519A0
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-3 T13/2161-D revision 4
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Dec 6 16:43:38 2020 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 19
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 24
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 9
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 1085
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 3
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 1
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 2
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 1500
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 13
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 36
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 4247
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 3547
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 1512
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 24 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 19 --- Power-on Hours
|
||||
0x01 0x018 6 278346459 --- Logical Sectors Written
|
||||
0x01 0x020 6 1225680 --- Number of Write Commands
|
||||
0x01 0x028 6 232511892 --- Logical Sectors Read
|
||||
0x01 0x030 6 1308188 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 21 Device-to-host register FISes sent due to a COMRESET
|
||||
|
166
SSD/KingSpec/NT/NT-256/8D993B59D3AC
Normal file
166
SSD/KingSpec/NT/NT-256/8D993B59D3AC
Normal file
@@ -0,0 +1,166 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: JMicron/Maxiotek based SSDs
|
||||
Device Model: NT-256
|
||||
Serial Number: --
|
||||
Firmware Version: S0527A
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Apr 21 23:02:16 2021 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 1824
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 1921
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 10
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 24267
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 81
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 9
|
||||
167 Unknown_JMF_Attribute -O--CK 100 100 050 - 49
|
||||
168 SATA_Phy_Error_Count -O--CK 100 100 050 - 7000
|
||||
169 Unknown_JMF_Attribute -O--CK 100 100 050 - 100
|
||||
175 Bad_Cluster_Table_Count -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 676
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 53
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 161
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 94437
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 49998
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 49284
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
Device Error Count: 1
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1 [0] log entry is empty
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1921 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1824 --- Power-on Hours
|
||||
0x01 0x018 6 1894110911 --- Logical Sectors Written
|
||||
0x01 0x020 6 0 --- Number of Write Commands
|
||||
0x01 0x028 6 3276703421 --- Logical Sectors Read
|
||||
0x01 0x030 6 0 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
160
SSD/KingSpec/P3/P3-120/5C8F34E77647
Normal file
160
SSD/KingSpec/P3/P3-120/5C8F34E77647
Normal file
@@ -0,0 +1,160 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: P3-120
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: 1.00
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Mar 11 08:09:15 2021 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (65535) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x79) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 6) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 9255
|
||||
12 Power_Cycle_Count ------ 100 100 000 - 1934
|
||||
160 Unknown_Attribute ------ 100 100 000 - 0
|
||||
161 Unknown_Attribute ------ 100 100 000 - 0
|
||||
163 Unknown_Attribute ------ 100 100 000 - 0
|
||||
164 Unknown_Attribute ------ 100 100 000 - 182609
|
||||
165 Unknown_Attribute ------ 100 100 000 - 421
|
||||
166 Unknown_Attribute ------ 100 100 000 - 0
|
||||
167 Unknown_Attribute ------ 100 100 000 - 377
|
||||
192 Power-Off_Retract_Count ------ 100 100 000 - 725
|
||||
194 Temperature_Celsius ------ 100 100 000 - 33
|
||||
195 Hardware_ECC_Recovered ------ 100 100 000 - 1384549
|
||||
196 Reallocated_Event_Count ------ 100 100 000 - 0
|
||||
241 Total_LBAs_Written ------ 100 100 000 - 1687344
|
||||
242 Total_LBAs_Read ------ 100 100 000 - 1156222
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1934 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 9255 --- Power-on Hours
|
||||
0x01 0x018 6 110581786427 --- Logical Sectors Written
|
||||
0x01 0x028 6 75774181448 --- Logical Sectors Read
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x020 1 33 --- Highest Temperature
|
||||
0x05 0x028 1 33 --- Lowest Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 37 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
185
SSD/KingSpec/P3/P3-256/FCF596478417
Normal file
185
SSD/KingSpec/P3/P3-256/FCF596478417
Normal file
@@ -0,0 +1,185 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: P3-256
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: H190222
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, zeroed
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Feb 2 15:01:41 2021 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 860
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 149
|
||||
167 Unknown_Attribute -O---K 100 100 000 - 0
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
169 Unknown_Attribute PO--C- 094 094 010 - 2883595
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--C- 200 200 000 - 42951835667
|
||||
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 712
|
||||
187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 43
|
||||
194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50)
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 10
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 33
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 19
|
||||
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 10
|
||||
210 Unknown_Attribute -O--CK 200 200 000 - 14
|
||||
211 Unknown_Attribute -O--CK 200 200 000 - 12
|
||||
231 Unknown_SSD_Attribute PO---K 099 099 005 - 1
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 6680405632
|
||||
234 Unknown_Attribute -O--CK 100 100 000 - 47543049
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 3471362851
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 1910597007
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/30 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (166)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 149 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 860 --- Power-on Hours
|
||||
0x01 0x018 6 3471362851 --- Logical Sectors Written
|
||||
0x01 0x020 6 20645329 --- Number of Write Commands
|
||||
0x01 0x028 6 1910597007 --- Logical Sectors Read
|
||||
0x01 0x030 6 15808232 --- Number of Read Commands
|
||||
0x01 0x038 6 793365524864 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 4 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 34 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
182
SSD/KingSpec/Q/Q-720/2AD6DBEA3D23
Normal file
182
SSD/KingSpec/Q/Q-720/2AD6DBEA3D23
Normal file
@@ -0,0 +1,182 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: Q-720
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: T181207
|
||||
User Capacity: 720,150,552,576 bytes [720 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Feb 19 19:44:07 2021 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 178
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 90
|
||||
167 Unknown_Attribute -O---K 100 100 000 - 0
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
169 Unknown_Attribute PO--C- 095 095 010 - 23068694
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--C- 200 200 000 - 4295360515
|
||||
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 6816
|
||||
187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 79
|
||||
194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50)
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 6
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 3
|
||||
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
||||
210 Unknown_Attribute -O--CK 200 200 000 - 20
|
||||
211 Unknown_Attribute -O--CK 200 200 000 - 11
|
||||
231 Unknown_SSD_Attribute PO---K 100 100 005 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 2427492224
|
||||
234 Unknown_Attribute -O--CK 100 100 000 - 15218726
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 810707702
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 120721194
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/30 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (94)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 90 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 178 --- Power-on Hours
|
||||
0x01 0x018 6 810707702 --- Logical Sectors Written
|
||||
0x01 0x020 6 18443658 --- Number of Write Commands
|
||||
0x01 0x028 6 120721194 --- Logical Sectors Read
|
||||
0x01 0x030 6 3337093 --- Number of Read Commands
|
||||
0x01 0x038 6 163850319748 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
@@ -4,6 +4,12 @@ KingSpec Solid State Drives
|
||||
This is a list of all tested KingSpec solid state drive models and their MTBFs. See
|
||||
more info on reliability test in the [README](https://github.com/bsdhw/SMART).
|
||||
|
||||
Contents
|
||||
--------
|
||||
|
||||
1. [ SSD by Model ](#ssd-by-model)
|
||||
2. [ SSD by Family ](#ssd-by-family)
|
||||
|
||||
SSD by Model
|
||||
------------
|
||||
|
||||
@@ -11,11 +17,34 @@ Please take all columns into account when reading the table. Pay attention on th
|
||||
number of tested samples and power-on days. Simultaneous high values of both MTBF
|
||||
and errors are possible if only rare drives in the subset encounter errors.
|
||||
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
|
||||
| MFG | Model | Size | Samples | Days | Err | MTBF |
|
||||
|-----------|--------------------|--------|---------|-------|-------|--------|
|
||||
| KingSpec | NT-128 | 128 GB | 1 | 140 | 0 | 0.38 |
|
||||
| KingSpec | KSD-SA25.7-016MJ | 16 GB | 1 | 471 | 0 | 1.29 |
|
||||
| KingSpec | P3-120 | 120 GB | 1 | 385 | 0 | 1.06 |
|
||||
| KingSpec | MT-128 | 128 GB | 4 | 139 | 0 | 0.38 |
|
||||
| KingSpec | NT-128 | 128 GB | 2 | 70 | 0 | 0.19 |
|
||||
| KingSpec | NT-256 | 256 GB | 3 | 39 | 0 | 0.11 |
|
||||
| KingSpec | P3-256 | 256 GB | 1 | 35 | 0 | 0.10 |
|
||||
| KingSpec | NT-512 | 512 GB | 1 | 12 | 0 | 0.04 |
|
||||
| KingSpec | Q-720 | 720 GB | 1 | 7 | 0 | 0.02 |
|
||||
| KingSpec | KSD-SA25.7-008MJ | 8 GB | 1 | 4 | 0 | 0.01 |
|
||||
|
||||
SSD by Family
|
||||
-------------
|
||||
|
||||
Please take all columns into account when reading the table. Pay attention on the
|
||||
number of tested samples and power-on days. Simultaneous high values of both MTBF
|
||||
and errors are possible if only rare drives in the subset encounter errors.
|
||||
|
||||
Days — avg. days per sample,
|
||||
Err — avg. errors per sample,
|
||||
MTBF — avg. MTBF in years per sample.
|
||||
|
||||
| MFG | Family | Models | Samples | Days | Err | MTBF |
|
||||
|-----------|------------------------|--------|---------|-------|-------|--------|
|
||||
| KingSpec | Unknown | 7 | 10 | 147 | 0 | 0.40 |
|
||||
| KingSpec | JMicron/Maxiotek ba... | 2 | 5 | 52 | 0 | 0.14 |
|
||||
|
Reference in New Issue
Block a user