mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3084, modified: 0)
This commit is contained in:
Andrey Ponomarenko
243
SSD/Samsung/SSD PM810/SSD PM810 2.5-inch 7mm 256GB/D54ACA8C2C7E
Normal file
243
SSD/Samsung/SSD PM810/SSD PM810 2.5-inch 7mm 256GB/D54ACA8C2C7E
Normal file
@@ -0,0 +1,243 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p2 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Samsung based SSDs
|
||||
Device Model: SAMSUNG SSD PM810 2.5" 7mm 256GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0000f0 ...
|
||||
Firmware Version: AXM08D1Q
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 1
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Feb 8 17:21:45 2021 GMT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 1680) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x53) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 28) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct PO--CK 099 099 --- - 13
|
||||
9 Power_On_Hours -O--CK 098 098 --- - 8697
|
||||
12 Power_Cycle_Count -O--CK 097 097 --- - 2573
|
||||
175 Program_Fail_Count_Chip -O--CK 099 099 --- - 12
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 --- - 0
|
||||
177 Wear_Leveling_Count PO--C- 098 098 --- - 58
|
||||
178 Used_Rsvd_Blk_Cnt_Chip PO--C- 077 077 --- - 902
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 079 079 --- - 1670
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 079 079 --- - 6394
|
||||
181 Program_Fail_Cnt_Total -O--CK 099 099 --- - 13
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 --- - 0
|
||||
183 Runtime_Bad_Block PO--C- 099 099 --- - 13
|
||||
187 Uncorrectable_Error_Cnt -O--CK 099 099 --- - 11
|
||||
195 ECC_Error_Rate -O-RC- 199 199 --- - 11
|
||||
198 Offline_Uncorrectable ----CK 100 100 --- - 0
|
||||
199 CRC_Error_Count -OSRCK 253 253 --- - 1
|
||||
232 Available_Reservd_Space PO--C- 077 077 --- - 3130
|
||||
241 Total_LBAs_Written -O--CK 003 003 --- - 4187556915
|
||||
242 Total_LBAs_Read -O--CK 078 078 --- - 944270717
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 0
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 1 Host vendor specific log
|
||||
|
||||
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
Device Error Count: 8 (device log contains only the most recent 4 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 8 [3] occurred at disk power-on lifetime: 8481 hours (353 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 08 56 81 40 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 00 00 00:27:40.000 FLUSH CACHE EXT
|
||||
61 00 10 00 f8 00 00 00 66 da e0 40 00 00:27:40.000 WRITE FPDMA QUEUED
|
||||
|
||||
Error 7 [2] occurred at disk power-on lifetime: 8481 hours (353 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 66 db 1f 40 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 00 00 00:27:40.000 FLUSH CACHE EXT
|
||||
61 00 08 00 d8 00 00 00 66 da 60 40 00 00:27:40.000 WRITE FPDMA QUEUED
|
||||
61 00 18 00 d0 00 00 05 95 cb b0 40 00 00:27:40.000 WRITE FPDMA QUEUED
|
||||
61 00 08 00 c8 00 00 06 82 2d 88 40 00 00:27:40.000 WRITE FPDMA QUEUED
|
||||
61 00 08 00 b0 00 00 06 84 8c 58 40 00 00:27:40.000 WRITE FPDMA QUEUED
|
||||
|
||||
Error 6 [1] occurred at disk power-on lifetime: 8481 hours (353 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 01 00 00 00 08 56 80 40 00 Error: WP at LBA = 0x00085680 = 546432
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 50 00 00 00 66 da 58 40 00 00:27:37.000 WRITE FPDMA QUEUED
|
||||
61 00 08 00 48 00 00 06 86 53 98 40 00 00:27:37.000 WRITE FPDMA QUEUED
|
||||
61 00 28 00 40 00 00 08 98 32 e0 40 00 00:27:37.000 WRITE FPDMA QUEUED
|
||||
61 00 10 00 38 00 00 07 76 27 a8 40 00 00:27:37.000 WRITE FPDMA QUEUED
|
||||
61 00 08 00 28 00 00 0a 13 74 d8 40 00 00:27:37.000 WRITE FPDMA QUEUED
|
||||
|
||||
Error 5 [0] occurred at disk power-on lifetime: 8481 hours (353 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 01 00 00 00 08 56 80 40 00 Error: WP at LBA = 0x00085680 = 546432
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 c8 00 00 00 66 da c0 40 00 00:27:34.000 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 04 00 00 00:27:34.000 READ LOG EXT
|
||||
ec 00 00 00 01 00 00 00 00 00 00 00 00 00:27:34.000 IDENTIFY DEVICE
|
||||
ef 00 10 00 03 00 00 00 00 00 00 00 00 00:27:34.000 SET FEATURES [Enable SATA feature]
|
||||
ef 00 10 00 02 00 00 00 00 00 00 00 00 00:27:34.000 SET FEATURES [Enable SATA feature]
|
||||
|
||||
Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 8672 -
|
||||
# 2 Short offline Completed: read failure 90% 8481 546304
|
||||
# 3 Short offline Completed: read failure 90% 8481 546304
|
||||
# 4 Short offline Completed without error 00% 3846 -
|
||||
# 5 Short offline Completed without error 00% 3083 -
|
||||
# 6 Short offline Completed without error 00% 3003 -
|
||||
# 7 Short offline Completed without error 00% 2992 -
|
||||
# 8 Short offline Completed without error 00% 2992 -
|
||||
# 9 Short offline Completed without error 00% 2936 -
|
||||
#10 Short offline Completed without error 00% 2935 -
|
||||
#11 Short offline Completed without error 00% 2618 -
|
||||
#12 Short offline Completed without error 00% 2424 -
|
||||
#13 Short offline Completed without error 00% 1921 -
|
||||
#14 Short offline Completed without error 00% 1614 -
|
||||
#15 Short offline Completed without error 00% 1611 -
|
||||
#16 Short offline Completed without error 00% 1562 -
|
||||
#17 Short offline Completed without error 00% 963 -
|
||||
#18 Short offline Completed without error 00% 921 -
|
||||
#19 Short offline Completed without error 00% 847 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
Reference in New Issue
Block a user