mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 4, modified: 1172)
This commit is contained in:
@@ -1,4 +1,4 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p2 amd64] (local build)
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
@@ -14,7 +14,7 @@ Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Sat Dec 16 21:45:05 2023 CET
|
||||
Local Time is: Sun Jun 2 20:28:33 2024 CEST
|
||||
|
||||
==> WARNING: Using smartmontools or hdparm with this
|
||||
drive may result in data loss due to a firmware bug.
|
||||
@@ -27,7 +27,7 @@ https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 128 (quiet), recommended: 254
|
||||
APM level is: 254 (maximum performance)
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
@@ -74,27 +74,27 @@ Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 135
|
||||
2 Throughput_Performance -OS--K 252 252 000 - 0
|
||||
3 Spin_Up_Time PO---K 067 043 025 - 10004
|
||||
4 Start_Stop_Count -O--CK 095 095 000 - 5105
|
||||
3 Spin_Up_Time PO---K 067 043 025 - 10284
|
||||
4 Start_Stop_Count -O--CK 095 095 000 - 5399
|
||||
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
|
||||
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
|
||||
8 Seek_Time_Performance --S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 25336
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 27343
|
||||
10 Spin_Retry_Count -O--CK 252 252 051 - 0
|
||||
11 Calibration_Retry_Count -O--CK 252 252 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 097 097 000 - 3295
|
||||
181 Program_Fail_Cnt_Total -O---K 100 100 000 - 6795628
|
||||
191 G-Sense_Error_Rate -O---K 001 001 000 - 28810595
|
||||
12 Power_Cycle_Count -O--CK 097 097 000 - 3506
|
||||
181 Program_Fail_Cnt_Total -O---K 100 100 000 - 6796092
|
||||
191 G-Sense_Error_Rate -O---K 001 001 000 - 28810600
|
||||
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
|
||||
194 Temperature_Celsius -O---- 063 047 000 - 37 (Min/Max 14/53)
|
||||
194 Temperature_Celsius -O---- 060 047 000 - 40 (Min/Max 12/53)
|
||||
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 252 252 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 106540
|
||||
200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 106608
|
||||
223 Load_Retry_Count -O--CK 252 252 000 - 0
|
||||
225 Load_Cycle_Count -O--CK 100 100 000 - 5310
|
||||
225 Load_Cycle_Count -O--CK 100 100 000 - 5611
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
@@ -290,8 +290,8 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 37 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/42 Celsius
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 18/41 Celsius
|
||||
Lifetime Min/Max Temperature: 9/66 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
@@ -301,7 +301,7 @@ Temperature Sampling Period: 5 minutes
|
||||
Temperature Logging Interval: 5 minutes
|
||||
Min/Max recommended Temperature: -5/80 Celsius
|
||||
Min/Max Temperature Limit: -10/85 Celsius
|
||||
Temperature History Size (Index): 128 (112)
|
||||
Temperature History Size (Index): 128 (106)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
@@ -321,8 +321,8 @@ ID Size Value Description
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 34 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 33 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
|
@@ -12,7 +12,7 @@ Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
|
||||
SATA Version is: SATA 2.5, 1.5 Gb/s
|
||||
Local Time is: Thu Sep 5 21:22:41 2024 CEST
|
||||
Local Time is: Tue Nov 26 20:59:15 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -61,25 +61,25 @@ SCT capabilities: (0x003f) SCT Status supported.
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 110
|
||||
3 Spin_Up_Time POS--- 252 252 025 - 2687
|
||||
4 Start_Stop_Count -O--CK 097 097 000 - 3543
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 117
|
||||
3 Spin_Up_Time POS--- 252 252 025 - 2812
|
||||
4 Start_Stop_Count -O--CK 097 097 000 - 3545
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 1
|
||||
7 Seek_Error_Rate POSR-- 252 252 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 054 054 000 - 23801
|
||||
9 Power_On_Hours -O--CK 053 053 000 - 24131
|
||||
10 Spin_Retry_Count PO--CK 252 252 051 - 0
|
||||
11 Calibration_Retry_Count -O--CK 068 068 000 - 33246
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 1810
|
||||
11 Calibration_Retry_Count -O--CK 067 067 000 - 34004
|
||||
12 Power_Cycle_Count -O--CK 099 099 000 - 1812
|
||||
184 End-to-End_Error PO--CK 252 252 070 - 0
|
||||
187 Reported_Uncorrect -O--CK 252 252 000 - 0
|
||||
188 Command_Timeout -O--CK 252 252 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 073 031 040 Past 27 (Min/Max 13/69)
|
||||
190 Airflow_Temperature_Cel -O---K 076 031 040 Past 24 (Min/Max 13/69)
|
||||
191 G-Sense_Error_Rate -O--CK 093 093 000 - 80467
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 100
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 102
|
||||
193 Load_Cycle_Count -O--CK 002 002 000 - 999999
|
||||
194 Temperature_Celsius -O---K 064 031 000 - 27 (Min/Max 13/69)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 001 000 - 16033
|
||||
194 Temperature_Celsius -O---K 064 031 000 - 24 (Min/Max 13/69)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 001 000 - 19333
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 252 252 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
@@ -132,8 +132,8 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 27 Celsius
|
||||
Power Cycle Min/Max Temperature: 18/32 Celsius
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: 20/27 Celsius
|
||||
Lifetime Min/Max Temperature: 18/69 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
@@ -142,7 +142,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 15/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (30)
|
||||
Temperature History Size (Index): 128 (2)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 75 (7.5 seconds)
|
||||
@@ -155,7 +155,7 @@ Pending Defects log (GP Log 0x0c) not supported
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 47 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
|
@@ -12,7 +12,7 @@ Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
|
||||
SATA Version is: SATA 2.5, 1.5 Gb/s
|
||||
Local Time is: Mon Mar 11 18:54:07 2024 -03
|
||||
Local Time is: Sun May 12 20:52:52 2024 -04
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 254
|
||||
@@ -62,27 +62,27 @@ SCT capabilities: (0x003f) SCT Status supported.
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 12
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 2489
|
||||
3 Spin_Up_Time POS--- 252 252 025 - 2625
|
||||
4 Start_Stop_Count -O--CK 079 079 000 - 22015
|
||||
4 Start_Stop_Count -O--CK 078 078 000 - 22563
|
||||
5 Reallocated_Sector_Ct PO--CK 045 045 010 - 517
|
||||
7 Seek_Error_Rate POSR-- 252 252 051 - 0
|
||||
8 Seek_Time_Performance --S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 062 062 000 - 19114
|
||||
9 Power_On_Hours -O--CK 062 062 000 - 19221
|
||||
10 Spin_Retry_Count -O--CK 100 100 051 - 1
|
||||
12 Power_Cycle_Count -O--CK 093 093 000 - 7635
|
||||
12 Power_Cycle_Count -O--CK 093 093 000 - 7759
|
||||
191 G-Sense_Error_Rate -O--CK 002 002 000 - 999999
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2839
|
||||
194 Temperature_Celsius -O---K 112 052 000 - 42 (Min/Max 9/62)
|
||||
195 Hardware_ECC_Recovered -O-RC- 001 001 000 - 58355
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2899
|
||||
194 Temperature_Celsius -O---K 130 052 000 - 36 (Min/Max 9/62)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 001 000 - 18141
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 252 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 089 089 000 - 103
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 106
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 73
|
||||
201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 793
|
||||
225 Load_Cycle_Count -O--CK 086 086 000 - 145107
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 893
|
||||
225 Load_Cycle_Count -O--CK 086 086 000 - 145466
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
@@ -135,8 +135,8 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 42 Celsius
|
||||
Power Cycle Min/Max Temperature: 38/42 Celsius
|
||||
Current Temperature: 36 Celsius
|
||||
Power Cycle Min/Max Temperature: 21/36 Celsius
|
||||
Lifetime Min/Max Temperature: 10/62 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
@@ -145,7 +145,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 15/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (19)
|
||||
Temperature History Size (Index): 128 (13)
|
||||
|
||||
SMART WRITE LOG does not return COUNT and LBA_LOW register
|
||||
SCT (Get) Error Recovery Control command failed
|
||||
|
Reference in New Issue
Block a user