mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 4, modified: 1172)
This commit is contained in:
Andrey Ponomarenko
@@ -1,4 +1,4 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE amd64] (local build)
|
||||
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
@@ -14,19 +14,14 @@ Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Tue Aug 27 02:10:05 2024 UTC
|
||||
Local Time is: Mon Aug 26 23:43:44 2024 MDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x06) Offline data collection activity
|
||||
@@ -61,208 +56,134 @@ SCT capabilities: (0x003d) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 1984
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 2739
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 1600
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 043 043 000 - 23021
|
||||
10 Spin_Retry_Count PO--CK 154 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 2111
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 21
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 199
|
||||
193 Load_Cycle_Count -O--CK 025 025 000 - 753328
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 39 (Min/Max 14/58)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 411
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 2
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 2
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 5
|
||||
220 Disk_Shift -O---- 100 100 000 - 8219
|
||||
222 Loaded_Hours -O--CK 070 070 000 - 12348
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 324
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
||||
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
|
||||
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1385
|
||||
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2741
|
||||
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 1600
|
||||
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
||||
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
|
||||
9 Power_On_Hours 0x0032 043 043 000 Old_age Always - 23025
|
||||
10 Spin_Retry_Count 0x0033 154 100 030 Pre-fail Always - 0
|
||||
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2113
|
||||
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 21
|
||||
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 199
|
||||
193 Load_Cycle_Count 0x0032 025 025 000 Old_age Always - 753433
|
||||
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 14/58)
|
||||
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 411
|
||||
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 2
|
||||
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 2
|
||||
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 5
|
||||
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8218
|
||||
222 Loaded_Hours 0x0032 070 070 000 Old_age Always - 12349
|
||||
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
|
||||
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 317
|
||||
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 3092 (device log contains only the most recent 256 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 3092 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 3092 [19] occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
Error 3092 occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 7a 00 00 00 77 cf 4d 60 00 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 7a 4d cf 77 60 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 78 00 00 00 77 cf 4d 40 00 41d+01:36:51.627 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:51.627 READ LOG EXT
|
||||
60 00 01 00 68 00 00 00 77 cf 4d 40 00 41d+01:36:47.616 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:47.615 READ LOG EXT
|
||||
60 00 01 00 58 00 00 00 77 cf 4d 40 00 41d+01:36:43.605 READ FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 01 78 4d cf 77 40 00 41d+01:36:51.627 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:51.627 READ LOG EXT
|
||||
60 01 68 4d cf 77 40 00 41d+01:36:47.616 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:47.615 READ LOG EXT
|
||||
60 01 58 4d cf 77 40 00 41d+01:36:43.605 READ FPDMA QUEUED
|
||||
|
||||
Error 3091 [18] occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
Error 3091 occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 6a 00 00 00 77 cf 4d 60 00 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 6a 4d cf 77 60 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 68 00 00 00 77 cf 4d 40 00 41d+01:36:47.616 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:47.615 READ LOG EXT
|
||||
60 00 01 00 58 00 00 00 77 cf 4d 40 00 41d+01:36:43.605 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:43.604 READ LOG EXT
|
||||
61 00 08 00 48 00 00 26 2b a6 38 40 00 41d+01:36:39.563 WRITE FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 01 68 4d cf 77 40 00 41d+01:36:47.616 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:47.615 READ LOG EXT
|
||||
60 01 58 4d cf 77 40 00 41d+01:36:43.605 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:43.604 READ LOG EXT
|
||||
61 08 48 38 a6 2b 40 00 41d+01:36:39.563 WRITE FPDMA QUEUED
|
||||
|
||||
Error 3090 [17] occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
Error 3090 occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 5a 00 00 00 77 cf 4d 60 00 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 5a 4d cf 77 60 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 58 00 00 00 77 cf 4d 40 00 41d+01:36:43.605 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:43.604 READ LOG EXT
|
||||
61 00 08 00 48 00 00 26 2b a6 38 40 00 41d+01:36:39.563 WRITE FPDMA QUEUED
|
||||
60 00 01 00 40 00 00 00 77 cf 4d 40 00 41d+01:36:39.560 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:39.560 READ LOG EXT
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 01 58 4d cf 77 40 00 41d+01:36:43.605 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:43.604 READ LOG EXT
|
||||
61 08 48 38 a6 2b 40 00 41d+01:36:39.563 WRITE FPDMA QUEUED
|
||||
60 01 40 4d cf 77 40 00 41d+01:36:39.560 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:39.560 READ LOG EXT
|
||||
|
||||
Error 3089 [16] occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
Error 3089 occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 42 00 00 00 77 cf 4d 60 00 Error: WP at LBA = 0x0077cf4d = 7851853
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 42 4d cf 77 60 Error: WP at LBA = 0x0077cf4d = 7851853
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 48 00 00 26 2b a6 38 40 00 41d+01:36:39.563 WRITE FPDMA QUEUED
|
||||
60 00 01 00 40 00 00 00 77 cf 4d 40 00 41d+01:36:39.560 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+01:36:39.560 READ LOG EXT
|
||||
60 00 01 00 30 00 00 00 77 cf 4d 40 00 41d+01:36:35.530 READ FPDMA QUEUED
|
||||
60 00 01 00 28 00 00 00 77 cf 4c 40 00 41d+01:36:23.334 READ FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
61 08 48 38 a6 2b 40 00 41d+01:36:39.563 WRITE FPDMA QUEUED
|
||||
60 01 40 4d cf 77 40 00 41d+01:36:39.560 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 41d+01:36:39.560 READ LOG EXT
|
||||
60 01 30 4d cf 77 40 00 41d+01:36:35.530 READ FPDMA QUEUED
|
||||
60 01 28 4c cf 77 40 00 41d+01:36:23.334 READ FPDMA QUEUED
|
||||
|
||||
Error 3088 [15] occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
Error 3088 occurred at disk power-on lifetime: 20507 hours (854 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 32 00 00 00 77 cf 4d 60 00 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 32 4d cf 77 60 Error: UNC at LBA = 0x0077cf4d = 7851853
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 30 00 00 00 77 cf 4d 40 00 41d+01:36:35.530 READ FPDMA QUEUED
|
||||
60 00 01 00 28 00 00 00 77 cf 4c 40 00 41d+01:36:23.334 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 00 41d+01:35:32.904 FLUSH CACHE EXT
|
||||
61 00 08 00 18 00 00 4a 85 7d 48 40 00 41d+01:35:32.903 WRITE FPDMA QUEUED
|
||||
61 00 08 00 10 00 00 4a 85 7b 48 40 00 41d+01:35:32.903 WRITE FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 01 30 4d cf 77 40 00 41d+01:36:35.530 READ FPDMA QUEUED
|
||||
60 01 28 4c cf 77 40 00 41d+01:36:23.334 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 40 00 41d+01:35:32.904 FLUSH CACHE EXT
|
||||
61 08 18 48 7d 85 40 00 41d+01:35:32.903 WRITE FPDMA QUEUED
|
||||
61 08 10 48 7b 85 40 00 41d+01:35:32.903 WRITE FPDMA QUEUED
|
||||
|
||||
Error 3087 [14] occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 ba 00 00 00 77 cf 4e 60 00 Error: UNC at LBA = 0x0077cf4e = 7851854
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 b8 00 00 00 77 cf 4e 40 00 40d+22:13:51.116 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 40d+22:13:51.115 READ LOG EXT
|
||||
60 00 01 00 a8 00 00 00 77 cf 4e 40 00 40d+22:13:43.304 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 40d+22:13:43.304 READ LOG EXT
|
||||
60 00 01 00 98 00 00 00 77 cf 4e 40 00 40d+22:13:35.493 READ FPDMA QUEUED
|
||||
|
||||
Error 3086 [13] occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 aa 00 00 00 77 cf 4e 60 00 Error: UNC at LBA = 0x0077cf4e = 7851854
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 a8 00 00 00 77 cf 4e 40 00 40d+22:13:43.304 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 40d+22:13:43.304 READ LOG EXT
|
||||
60 00 01 00 98 00 00 00 77 cf 4e 40 00 40d+22:13:35.493 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 40d+22:13:35.492 READ LOG EXT
|
||||
61 00 20 00 88 00 00 2c 24 5a 58 40 00 40d+22:13:27.574 WRITE FPDMA QUEUED
|
||||
|
||||
Error 3085 [12] occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 9a 00 00 00 77 cf 4e 60 00 Error: UNC at LBA = 0x0077cf4e = 7851854
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 01 00 98 00 00 00 77 cf 4e 40 00 40d+22:13:35.493 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 40d+22:13:35.492 READ LOG EXT
|
||||
61 00 20 00 88 00 00 2c 24 5a 58 40 00 40d+22:13:27.574 WRITE FPDMA QUEUED
|
||||
61 00 08 00 80 00 00 26 2b a6 08 40 00 40d+22:13:27.574 WRITE FPDMA QUEUED
|
||||
61 00 20 00 78 00 00 2a 3e f1 48 40 00 40d+22:13:27.574 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed: read failure 00% 20498 7851853
|
||||
# 2 Extended offline Completed: read failure 00% 20489 7851853
|
||||
@@ -278,45 +199,7 @@ Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 39 Celsius
|
||||
Power Cycle Min/Max Temperature: 36/43 Celsius
|
||||
Lifetime Min/Max Temperature: 14/58 Celsius
|
||||
Under/Over Temperature Limit Count: 0/79
|
||||
The above only provides legacy SMART information - try 'smartctl -x' for more
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: 5/55 Celsius
|
||||
Temperature History Size (Index): 478 (133)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
Reference in New Issue
Block a user