1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30

Update of reports (new: 4, modified: 1172)

This commit is contained in:
Andrey Ponomarenko
2025-01-05 03:17:30 +03:00
parent f3761f28ca
commit f78ebcf301
1176 changed files with 24053 additions and 22535 deletions

View File

@@ -1,5 +1,5 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: JWX MSATA 128GB
@@ -10,10 +10,10 @@ Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: mSATA
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5319
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 11 02:16:06 2023 +08
Local Time is: Mon Aug 21 16:00:39 2023 +08
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
@@ -60,33 +60,33 @@ Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 6902
12 Power_Cycle_Count -O--CK 100 100 050 - 104
9 Power_On_Hours -O--CK 100 100 050 - 9327
12 Power_Cycle_Count -O--CK 100 100 050 - 106
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute PO--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 9
164 Unknown_Attribute -O--CK 100 100 050 - 1182141
165 Unknown_Attribute -O--CK 100 100 050 - 7561
164 Unknown_Attribute -O--CK 100 100 050 - 1876890
165 Unknown_Attribute -O--CK 100 100 050 - 12164
166 Unknown_Attribute -O--CK 100 100 050 - 8
167 Unknown_Attribute -O--CK 100 100 050 - 632
167 Unknown_Attribute -O--CK 100 100 050 - 1004
168 Unknown_Attribute -O--CK 100 100 050 - 5050
169 Unknown_Attribute -O--CK 100 100 050 - 88
169 Unknown_Attribute -O--CK 100 100 050 - 81
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 57
192 Power-Off_Retract_Count -O--CK 100 100 050 - 58
194 Temperature_Celsius -O---K 100 100 050 - 40
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written ----CK 100 100 050 - 548139
242 Total_LBAs_Read ----CK 100 100 050 - 7503
245 Unknown_Attribute -O--CK 100 100 050 - 540434
241 Total_LBAs_Written ----CK 100 100 050 - 884091
242 Total_LBAs_Read ----CK 100 100 050 - 9341
245 Unknown_Attribute -O--CK 100 100 050 - 871195
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
@@ -111,7 +111,7 @@ Address Access R/W Size Description
0xde GPL VS 8 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
Device Error Count: 2
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
@@ -127,10 +127,28 @@ Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT
2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT
b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG
b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS
Error 1 [0] log entry is empty
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 90% 4728 -
# 1 Extended offline Interrupted (host reset) 90% 7396 -
# 2 Short offline Interrupted (host reset) 90% 4728 -
Selective Self-tests/Logging not supported
@@ -139,14 +157,14 @@ SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 104 --- Lifetime Power-On Resets
0x01 0x010 4 6902 --- Power-on Hours
0x01 0x018 6 1563137049 --- Logical Sectors Written
0x01 0x020 6 323615 --- Number of Write Commands
0x01 0x028 6 491775472 --- Logical Sectors Read
0x01 0x030 6 89378 --- Number of Read Commands
0x01 0x008 4 106 --- Lifetime Power-On Resets
0x01 0x010 4 9327 --- Power-on Hours
0x01 0x018 6 2105246777 --- Logical Sectors Written
0x01 0x020 6 25570034 --- Number of Write Commands
0x01 0x028 6 612218847 --- Logical Sectors Read
0x01 0x030 6 422057 --- Number of Read Commands
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 12 --- Percentage Used Endurance Indicator
0x07 0x008 1 19 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
@@ -158,5 +176,5 @@ ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000a 4 11 Device-to-host register FISes sent due to a COMRESET