smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Maxtor DiamondMax 21 Device Model: MAXTOR STM3250820AS Serial Number: -- Firmware Version: 3.AAE User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Sep 4 11:45:23 2022 SAST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 089 006 - 81562320 3 Spin_Up_Time PO---- 096 095 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4357 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 5 7 Seek_Error_Rate POSR-- 086 060 030 - 409855603 9 Power_On_Hours -O--CK 088 088 000 - 10675 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4755 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 031 045 Past 40 (Min/Max 40/40) 194 Temperature_Celsius -O---K 040 069 000 - 40 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 083 055 000 - 189709558 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 639 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 639 [18] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:03:58.970 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:03:58.970 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.427 READ MULTIPLE EXT Error 638 [17] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:02.979 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 637 [16] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:43:02.979 READ MULTIPLE EXT Error 636 [15] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:05.846 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:04:05.782 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:03.427 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 635 [14] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:03:58.970 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:03:58.970 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.427 READ MULTIPLE EXT Error 634 [13] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:02.979 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 633 [12] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:43:02.979 READ MULTIPLE EXT Error 632 [11] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:05.846 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:04:05.782 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:03.427 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS