smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE-p1 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Dec 27 02:02:11 2020 CET ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: (19860) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 331) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 4562 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 068 065 025 - 9930 4 Start_Stop_Count -O--CK 096 096 000 - 4262 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 53982 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 88 181 Program_Fail_Cnt_Total -O---K 079 079 000 - 465008294 191 G-Sense_Error_Rate -O---K 100 100 000 - 7 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 064 000 - 27 (Min/Max 7/38) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 77 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 10724 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 4270 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 52614 hours (2192 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 c3 00 00 06 fd bb 20 40 00 Error: UNC at LBA = 0x06fdbb20 = 117291808 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 06 fd ba e3 40 08 01:19:48.831 READ FPDMA QUEUED 60 00 00 01 00 00 00 06 fd ba e3 40 08 01:19:48.832 READ FPDMA QUEUED 60 00 00 01 00 00 00 06 fd b9 e3 40 08 01:19:48.832 READ FPDMA QUEUED 60 00 00 01 00 00 00 06 fd b8 e3 40 08 01:19:48.832 READ FPDMA QUEUED 60 00 00 01 00 00 00 06 fd b7 e3 40 08 01:19:48.832 READ FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 51287 hours (2136 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 1b 00 00 06 eb 7a c8 40 00 Error: UNC at LBA = 0x06eb7ac8 = 116095688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 fb 02 1c 40 08 00:00:11.619 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.619 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:11.619 READ LOG EXT 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 51287 hours (2136 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 1b 00 00 06 eb 7a c8 40 00 Error: UNC at LBA = 0x06eb7ac8 = 116095688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 fb 02 1c 40 08 00:00:11.614 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.614 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:11.614 READ LOG EXT 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 51287 hours (2136 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 1b 00 00 06 eb 7a c8 40 00 Error: UNC at LBA = 0x06eb7ac8 = 116095688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 fb 02 1c 40 08 00:00:11.608 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.608 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:11.608 READ LOG EXT 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 51287 hours (2136 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 1b 00 00 06 eb 7a c8 40 00 Error: UNC at LBA = 0x06eb7ac8 = 116095688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 fb 02 1c 40 08 00:00:11.603 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.603 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:11.603 READ LOG EXT 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 51287 hours (2136 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 1b 00 00 06 eb 7a c8 40 00 Error: UNC at LBA = 0x06eb7ac8 = 116095688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 fb 02 1c 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 eb 7a 63 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 e8 d7 08 40 08 00:00:11.598 READ FPDMA QUEUED 60 00 00 00 80 00 00 06 b2 34 9c 40 08 00:00:11.598 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 67 hours (2 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 20 00 00 e8 e0 88 af e0 00 Error: IDNF at LBA = 0xe8e088af = 3907029167 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 34 00 00 00 20 00 00 e8 e0 88 af e0 00 00:00:26.163 WRITE SECTORS(S) EXT 24 00 00 00 20 00 00 e8 e0 88 8f e0 00 00:00:26.163 READ SECTOR(S) EXT 34 00 00 00 20 00 00 e8 e0 88 8f e0 00 00:00:26.163 WRITE SECTORS(S) EXT 24 00 00 00 20 00 00 e8 e0 88 6f e0 00 00:00:26.163 READ SECTOR(S) EXT 34 00 00 00 20 00 00 e8 e0 88 6f e0 00 00:00:26.163 WRITE SECTORS(S) EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 5 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Aborted_by_host [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 15/32 Celsius Lifetime Min/Max Temperature: 4/56 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (50) SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific