smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG HD256GJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AR10006 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Sep 21 21:05:52 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 2100) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1 2 Throughput_Performance POS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 083 073 025 - 5362 4 Start_Stop_Count -O--CK 099 099 000 - 1063 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate POSR-K 252 252 051 - 0 8 Seek_Time_Performance P-S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 30593 10 Spin_Retry_Count PO--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1050 183 Runtime_Bad_Block -O--CK 252 252 010 - 0 184 End-to-End_Error PO--CK 252 252 097 - 0 186 Unknown_Attribute -O--CK 252 252 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 6 188 Command_Timeout -O--CK 252 252 000 - 0 190 Airflow_Temperature_Cel -O---- 070 061 040 - 30 (Min/Max 6/39) 191 G-Sense_Error_Rate -O---K 020 020 000 - 813208 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 100 100 000 - 9464 194 Temperature_Celsius -O---- 064 061 000 - 30 (Min/Max 6/39) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 67 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 29 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 67 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 67 [2] occurred at disk power-on lifetime: 27504 hours (1146 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 d1 00 00 15 f5 3d af e0 00 Error: ICRC, ABRT 209 sectors at LBA = 0x15f53daf = 368393647 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 04 c0 00 00 15 f5 39 c0 e0 08 00:00:10.594 WRITE DMA EXT c8 00 00 00 00 00 00 00 f0 02 20 e7 08 00:00:10.594 READ DMA 35 00 00 08 40 00 00 15 f5 2f c0 e0 08 00:00:10.594 WRITE DMA EXT 35 00 00 03 80 00 00 15 f5 2c 40 e0 08 00:00:10.594 WRITE DMA EXT 35 00 00 08 00 00 00 15 f4 e0 00 e0 08 00:00:10.594 WRITE DMA EXT Error 66 [1] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 01 00 00 11 1b d2 d7 e0 00 Error: ICRC, ABRT 257 sectors at LBA = 0x111bd2d7 = 287036119 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 02 00 00 00 11 1b d1 d8 e0 08 00:00:00.748 WRITE DMA EXT ca 00 00 00 08 00 00 00 f7 65 50 ed 08 00:00:00.748 WRITE DMA ca 00 00 00 08 00 00 00 f7 64 d8 ed 08 00:00:00.748 WRITE DMA ca 00 00 00 08 00 00 00 4b 47 70 e4 08 00:00:00.748 WRITE DMA ca 00 00 00 08 00 00 00 4b 47 08 e4 08 00:00:00.748 WRITE DMA Error 65 [0] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 89 00 00 00 49 5c ef e4 00 Error: ICRC, ABRT at LBA = 0x04495cef = 71916783 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 d8 00 00 00 49 5c a0 e4 08 00:00:00.748 WRITE DMA 35 00 00 05 c0 00 00 04 49 56 e0 e0 08 00:00:00.748 WRITE DMA EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.748 IDENTIFY DEVICE ef 00 03 00 42 00 00 00 00 00 00 a0 08 00:00:00.748 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.748 IDENTIFY DEVICE Error 64 [7] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 04 f1 00 00 04 49 57 af e0 00 Error: ICRC, ABRT 1265 sectors at LBA = 0x044957af = 71915439 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 c0 00 00 04 49 56 e0 e0 08 00:00:00.747 WRITE DMA EXT 25 00 00 00 08 00 00 12 ac 19 18 e0 08 00:00:00.747 READ DMA EXT 25 00 00 00 08 00 00 1a 6c 1a 08 e0 08 00:00:00.747 READ DMA EXT 25 00 00 00 08 00 00 1a 6c 1a 00 e0 08 00:00:00.747 READ DMA EXT 25 00 00 00 08 00 00 19 ec 18 f8 e0 08 00:00:00.747 READ DMA EXT Error 63 [6] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 51 00 00 00 8e 68 a7 ed 00 Error: ICRC, ABRT at LBA = 0x0d8e68a7 = 227436711 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 60 00 00 00 8e 68 98 ed 08 00:00:00.743 WRITE DMA ca 00 00 00 10 00 00 00 cf c8 c8 e0 08 00:00:00.743 WRITE DMA ca 00 00 00 08 00 00 00 c4 28 e8 e0 08 00:00:00.743 WRITE DMA ca 00 00 00 08 00 00 00 c0 08 30 e0 08 00:00:00.743 WRITE DMA ca 00 00 00 08 00 00 00 c0 08 18 e0 08 00:00:00.743 WRITE DMA Error 62 [5] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 2c 04 00 eb 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0b2c0400 = 187433984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 2c 04 00 eb 08 00:00:00.709 READ DMA c8 00 00 00 08 00 00 00 2b d6 70 eb 08 00:00:00.709 READ DMA c8 00 00 00 08 00 00 00 2b db 50 eb 08 00:00:00.709 READ DMA c8 00 00 00 08 00 00 00 6b da 20 eb 08 00:00:00.709 READ DMA c8 00 00 00 08 00 00 00 6b d3 c8 eb 08 00:00:00.709 READ DMA Error 61 [4] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 2b fc 38 eb 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0b2bfc38 = 187431992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 2b fc 38 eb 08 00:00:00.675 READ DMA c8 00 00 00 f0 00 00 00 2a d9 10 eb 08 00:00:00.675 READ DMA c8 00 00 00 08 00 00 00 2a d9 08 eb 08 00:00:00.675 READ DMA c8 00 00 00 f0 00 00 00 2a da 10 eb 08 00:00:00.675 READ DMA c8 00 00 00 08 00 00 00 2a da 08 eb 08 00:00:00.675 READ DMA Error 60 [3] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 2c 0b 88 e4 00 Error: ICRC, ABRT 8 sectors at LBA = 0x042c0b88 = 69995400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 2c 0b 88 e4 08 00:00:00.639 READ DMA 25 00 00 00 08 00 00 1b 6c 14 70 e0 08 00:00:00.639 READ DMA EXT 25 00 00 00 08 00 00 1c 2c 15 48 e0 08 00:00:00.639 READ DMA EXT 25 00 00 00 08 00 00 1c 6c 13 30 e0 08 00:00:00.639 READ DMA EXT 25 00 00 00 08 00 00 1c 6c 13 70 e0 08 00:00:00.639 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 1 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Aborted_by_host [80% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 16/30 Celsius Lifetime Min/Max Temperature: 6/39 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (64) SCT Error Recovery Control: Read: 75 (7.5 seconds) Write: 75 (7.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific