smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG SP0411N Serial Number: -- Firmware Version: TW100-11 User Capacity: 40,059,321,856 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Sat Apr 17 14:24:02 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 900) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 15) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 051 - 40 3 Spin_Up_Time POS--- 074 057 000 - 4736 4 Start_Stop_Count -O--CK 096 096 000 - 4210 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate PO-R-- 253 253 051 - 0 8 Seek_Time_Performance --S--K 253 253 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1459740 10 Spin_Retry_Count PO--C- 253 253 049 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2223 194 Temperature_Celsius -O---K 127 058 000 - 37 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 100878490 196 Reallocated_Event_Count -O--C- 099 099 000 - 4 197 Current_Pending_Sector PO--CK 253 253 010 - 0 198 Offline_Uncorrectable P---CK 099 099 010 - 4 199 UDMA_CRC_Error_Count PO-R-- 100 100 051 - 76 200 Multi_Zone_Error_Rate PO-R-- 100 100 051 - 0 201 Soft_Read_Error_Rate PO-R-- 100 100 051 - 3 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 37632 inconsistent with error log pointer 5 ATA Error Count: 37632 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 37632 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 40 00 58 53 f1 Error: AMNF 64 sectors at LBA = 0x01535800 = 22239232 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 00 58 53 f1 00 20d+23:36:49.938 READ DMA ca 00 08 c0 00 00 f0 00 20d+23:36:43.938 WRITE DMA ca 00 40 c0 ae 47 f2 00 20d+23:36:43.938 WRITE DMA ca 00 08 40 00 9e f0 00 20d+23:36:43.938 WRITE DMA c8 00 08 88 12 c3 f4 00 20d+23:36:43.438 READ DMA Error 37631 occurred at disk power-on lifetime: 10748 hours (447 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 e8 05 88 f0 Error: ICRC, ABRT at LBA = 0x008805e8 = 8914408 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 e8 05 88 f0 00 00:17:40.313 READ DMA c8 00 00 e8 05 87 f0 00 00:17:40.313 READ DMA c8 00 00 e8 05 86 f0 00 00:17:40.313 READ DMA c8 00 00 e8 05 85 f0 00 00:17:40.313 READ DMA c8 00 00 e8 05 84 f0 00 00:17:40.313 READ DMA Error 37630 occurred at disk power-on lifetime: 9893 hours (412 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 b0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b1 10 01 01 00 00 b0 00 00:12:06.000 DEVICE CONFIGURATION [Reserved subcommand] [OBS-ACS-3] Error 37629 occurred at disk power-on lifetime: 9893 hours (412 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 b0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b1 10 01 01 00 00 b0 00 00:11:28.938 DEVICE CONFIGURATION [Reserved subcommand] [OBS-ACS-3] Error 37628 occurred at disk power-on lifetime: 9893 hours (412 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 b0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b1 10 01 01 00 00 b0 00 00:06:12.000 DEVICE CONFIGURATION [Reserved subcommand] [OBS-ACS-3] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11545 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported