smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 Device Model: SAMSUNG SP0812C Serial Number: -- Firmware Version: SU100-34 User Capacity: 80,060,424,192 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Sun Nov 17 16:46:19 2024 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3000) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 50) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 100 100 025 - 4160 4 Start_Stop_Count -O--CK 089 089 000 - 11741 5 Reallocated_Sector_Ct PO--CK 100 100 011 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 0 9 Power_On_Half_Minutes -O--CK 096 096 000 - 21160h+47m 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 7100 194 Temperature_Celsius -O---K 145 082 000 - 31 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 88563 196 Reallocated_Event_Count -O--CK 095 095 000 - 12 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Total_Offl_Uncorrectabl ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 051 - 0 201 Soft_Read_Error_Rate -O-R-- 100 100 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 2253 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2253 occurred at disk power-on lifetime: 20847 hours (868 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 40 31 2d e2 Error: UNC 128 sectors at LBA = 0x022d3140 = 36516160 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 40 31 2d e2 00 00:10:07.750 READ DMA ca 00 10 70 43 68 e0 00 00:10:07.750 WRITE DMA ca 00 00 70 42 68 e0 00 00:10:07.750 WRITE DMA ca 00 00 70 41 68 e0 00 00:10:07.750 WRITE DMA ca 00 00 70 40 68 e0 00 00:10:07.688 WRITE DMA Error 2252 occurred at disk power-on lifetime: 20815 hours (867 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 18 0e 18 e2 Error: UNC at LBA = 0x02180e18 = 35130904 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 18 0e 18 e2 00 00:39:20.313 READ DMA c8 00 40 dc b5 79 e0 00 00:39:20.313 READ DMA c8 00 08 98 ff 54 e2 00 00:39:20.313 READ DMA ca 00 90 38 04 d8 e2 00 00:39:20.313 WRITE DMA ca 00 00 38 03 d8 e2 00 00:39:20.313 WRITE DMA Error 2251 occurred at disk power-on lifetime: 20812 hours (867 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 18 0e 18 e2 Error: UNC at LBA = 0x02180e18 = 35130904 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 18 0e 18 e2 00 00:11:47.875 READ DMA ca 00 20 c0 ea a3 e1 00 00:11:47.875 WRITE DMA c8 00 40 1a a5 43 e2 00 00:11:47.875 READ DMA ca 00 20 20 20 a4 e1 00 00:11:47.875 WRITE DMA ca 00 20 c0 1e a4 e1 00 00:11:47.875 WRITE DMA Error 2250 occurred at disk power-on lifetime: 20782 hours (865 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 00 12 29 e2 Error: UNC at LBA = 0x02291200 = 36246016 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 12 29 e2 00 00:02:57.688 READ DMA c8 00 02 12 12 29 e2 00 00:02:57.625 READ DMA Error 2249 occurred at disk power-on lifetime: 20782 hours (865 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 00 12 29 e2 Error: UNC at LBA = 0x02291200 = 36246016 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 12 29 e2 00 00:02:56.625 READ DMA c8 00 00 00 33 9b e0 00 00:02:56.563 READ DMA c8 00 02 02 12 29 e2 00 00:02:56.563 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20843 - # 2 Short offline Interrupted (host reset) 80% 15491 - # 3 Short offline Completed without error 00% 13535 - # 4 Short offline Interrupted (host reset) 80% 12021 - # 5 Short offline Completed without error 00% 12019 - # 6 Short offline Completed without error 00% 11432 - # 7 Short offline Completed without error 00% 7737 - # 8 Short offline Interrupted (host reset) 20% 5867 - # 9 Short offline Interrupted (host reset) 40% 5549 - #10 Short offline Completed without error 00% 5546 - #11 Short offline Completed without error 00% 5534 - #12 Short offline Interrupted (host reset) 80% 5528 - #13 Short offline Completed without error 00% 5525 - #14 Short offline Completed without error 00% 5421 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported