smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-9YN164 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC4B User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 7 10:13:13 2024 MSK ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0x5a5e Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 216) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 226129112 3 Spin_Up_Time PO---- 095 094 000 - 0 4 Start_Stop_Count -O--CK 091 091 020 - 9434 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 082 060 030 - 181927584 9 Power_On_Hours -O--CK 076 076 000 - 21707 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5746 183 Runtime_Bad_Block -O--CK 001 001 000 - 147 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 085 085 000 - 15 188 Command_Timeout -O--CK 100 093 000 - 5 220 225 189 High_Fly_Writes -O-RCK 092 092 000 - 8 190 Airflow_Temperature_Cel -O---K 068 043 045 Past 32 (0 9 32 29 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2602 193 Load_Cycle_Count -O--CK 001 001 000 - 228891 194 Temperature_Celsius -O---K 032 057 000 - 32 (128 0 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 197 000 - 4238 240 Head_Flying_Hours ------ 100 253 000 - 16911h+52m+37.174s 241 Total_LBAs_Written ------ 100 253 000 - 177750647215285 242 Total_LBAs_Read ------ 100 253 000 - 85847461341638 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5067 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 21007 hours (875 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 30 c6 0a 18 00 00 Error: UNC at LBA = 0x30c60a18 = 818285080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:49.178 READ DMA EXT 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:46.411 READ DMA EXT 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:43.577 READ DMA EXT 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:40.808 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:05:40.668 READ LOG EXT Error 4 [3] occurred at disk power-on lifetime: 21007 hours (875 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 30 c6 0a 18 00 00 Error: UNC at LBA = 0x30c60a18 = 818285080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:46.411 READ DMA EXT 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:43.577 READ DMA EXT 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:40.808 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:05:40.668 READ LOG EXT 60 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:37.931 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 21007 hours (875 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 30 c6 0a 18 00 00 Error: UNC at LBA = 0x30c60a18 = 818285080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:43.577 READ DMA EXT 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:40.808 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:05:40.668 READ LOG EXT 60 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:37.931 READ FPDMA QUEUED 60 00 00 00 08 00 00 30 c6 0a a0 40 00 01:05:37.921 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 21007 hours (875 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 30 c6 0a 18 00 00 Error: UNC at LBA = 0x30c60a18 = 818285080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:40.808 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:05:40.668 READ LOG EXT 60 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:37.931 READ FPDMA QUEUED 60 00 00 00 08 00 00 30 c6 0a a0 40 00 01:05:37.921 READ FPDMA QUEUED 60 00 00 01 00 00 00 1f 8e 4e f8 40 00 01:05:37.919 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 21007 hours (875 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 30 c6 0a 18 00 00 Error: UNC at LBA = 0x30c60a18 = 818285080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 a0 00 00 30 c6 0a 00 40 00 01:05:37.931 READ FPDMA QUEUED 60 00 00 00 08 00 00 30 c6 0a a0 40 00 01:05:37.921 READ FPDMA QUEUED 60 00 00 01 00 00 00 1f 8e 4e f8 40 00 01:05:37.919 READ FPDMA QUEUED 60 00 00 01 00 00 00 1f 8e 4d f8 40 00 01:05:37.918 READ FPDMA QUEUED 60 00 00 01 00 00 00 1f 8e 4c f8 40 00 01:05:37.914 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 18214 - # 2 Short offline Completed without error 00% 18104 - # 3 Short offline Aborted by host 90% 13268 - # 4 Short offline Aborted by host 90% 13242 - # 5 Short offline Aborted by host 90% 13240 - # 6 Short offline Aborted by host 90% 13175 - # 7 Short offline Aborted by host 90% 13169 - # 8 Short offline Aborted by host 90% 13169 - # 9 Short offline Aborted by host 90% 13120 - #10 Short offline Aborted by host 90% 12922 - #11 Short offline Aborted by host 90% 12922 - #12 Short offline Aborted by host 90% 12922 - #13 Short offline Aborted by host 90% 12922 - #14 Short offline Aborted by host 90% 12922 - #15 Short offline Aborted by host 90% 12922 - #16 Short offline Aborted by host 90% 12922 - #17 Short offline Aborted by host 90% 12922 - #18 Short offline Aborted by host 90% 12922 - #19 Short offline Aborted by host 90% 12789 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/32 Celsius Lifetime Min/Max Temperature: 15/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS