smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate BarraCuda 3.5 (SMR) Device Model: ST4000DM004-2CV104 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5425 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 24 17:27:20 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 486) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 083 061 006 - 204847434 3 Spin_Up_Time PO---- 096 096 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 5905 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 081 060 045 - 138157336 9 Power_On_Hours -O--CK 090 090 000 - 9570h+05m+58.369s 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5456 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 076 076 000 - 24 188 Command_Timeout -O--CK 100 099 000 - 0 1 1 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 050 040 - 27 (Min/Max 22/27) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1085 193 Load_Cycle_Count -O--CK 091 091 000 - 18691 194 Temperature_Celsius -O---K 027 050 000 - 27 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 083 064 000 - 204847434 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 5892h+01m+08.084s 241 Total_LBAs_Written ------ 100 253 000 - 58273582721 242 Total_LBAs_Read ------ 100 253 000 - 17183168748 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 24 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 24 [3] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: UNC at LBA = 0x19a672440 = 6885418048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 01 7f f1 51 08 40 00 00:03:47.233 READ FPDMA QUEUED 60 00 00 01 00 00 01 80 30 0f a8 40 00 00:03:47.233 READ FPDMA QUEUED 60 00 00 00 28 00 01 7f f1 4f e0 40 00 00:03:47.232 READ FPDMA QUEUED 60 00 00 01 00 00 01 7f f3 0c 38 40 00 00:03:47.232 READ FPDMA QUEUED 61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:47.232 WRITE FPDMA QUEUED Error 23 [2] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: WP at LBA = 0x19a672440 = 6885418048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:40.760 WRITE FPDMA QUEUED 60 00 00 00 08 00 01 9a 67 24 40 40 00 00:03:40.759 READ FPDMA QUEUED 60 00 00 00 90 00 01 7f f3 0e 08 40 00 00:03:40.758 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:40.757 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:03:40.757 SET FEATURES [Enable SATA feature] Error 22 [1] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: UNC at LBA = 0x19a672440 = 6885418048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 01 9a 67 24 40 40 00 00:03:34.564 READ FPDMA QUEUED 61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:34.564 WRITE FPDMA QUEUED 60 00 00 00 20 00 01 7f f3 0b 38 40 00 00:03:34.562 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:34.562 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:03:34.562 SET FEATURES [Enable SATA feature] Error 21 [0] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: UNC at LBA = 0x19a672440 = 6885418048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 01 7f f3 0b 38 40 00 00:03:28.020 READ FPDMA QUEUED 61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:28.020 WRITE FPDMA QUEUED 60 00 00 00 08 00 01 9a 67 24 40 40 00 00:03:28.020 READ FPDMA QUEUED 60 00 00 01 00 00 01 7f f1 50 08 40 00 00:03:28.019 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:28.019 FLUSH CACHE EXT Error 20 [19] log entry is empty Error 19 [18] log entry is empty Error 18 [17] log entry is empty Error 17 [16] log entry is empty SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9515 - # 2 Short offline Completed without error 00% 9513 - # 3 Short offline Completed without error 00% 9508 - # 4 Short offline Completed without error 00% 9507 - # 5 Short offline Completed without error 00% 9503 - # 6 Short offline Completed without error 00% 9497 - # 7 Extended offline Interrupted (host reset) 80% 9490 - # 8 Short offline Completed without error 00% 9480 - # 9 Short offline Completed without error 00% 9473 - #10 Short offline Completed without error 00% 9463 - #11 Short offline Completed without error 00% 9000 - #12 Extended offline Interrupted (host reset) 00% 8992 - #13 Short offline Completed without error 00% 8511 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 22/27 Celsius Lifetime Min/Max Temperature: 16/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (98) SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 5456 --- Lifetime Power-On Resets 0x01 0x010 4 9570 --- Power-on Hours 0x01 0x018 6 58269861421 --- Logical Sectors Written 0x01 0x020 6 228005727 --- Number of Write Commands 0x01 0x028 6 17184962383 --- Logical Sectors Read 0x01 0x030 6 134273564 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2337660784 N-- Spindle Motor Power-on Hours 0x03 0x010 4 2337653846 N-- Head Flying Hours 0x03 0x018 4 18691 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 4 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 1083 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 28 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x010 1 26 --- Average Short Term Temperature 0x05 0x018 1 25 --- Average Long Term Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 35 --- Highest Average Short Term Temperature 0x05 0x038 1 23 --- Lowest Average Short Term Temperature 0x05 0x040 1 31 --- Highest Average Long Term Temperature 0x05 0x048 1 24 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 1343 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 15060 --- Number of Hardware Resets 0x06 0x010 4 3978 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS