smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p7 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9640320AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0002SDM1 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5799 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Nov 8 15:28:36 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 164) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 079 006 - 68521165 3 Spin_Up_Time PO---- 098 098 085 - 0 4 Start_Stop_Count -O--CK 094 094 020 - 6927 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 063 060 030 - 1323347721559 9 Power_On_Hours -O--CK 077 077 000 - 20957 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 094 094 020 - 6928 184 End-to-End_Error -O--CK 074 074 099 NOW 26 187 Reported_Uncorrect -O--CK 001 001 000 - 6884 188 Command_Timeout -O--CK 100 097 000 - 302 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 053 040 045 Past 47 (Min/Max 24/47 #216) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 208 192 Power-Off_Retract_Count -O--CK 100 100 000 - 350 193 Load_Cycle_Count -O--CK 001 001 000 - 305624 194 Temperature_Celsius -O---K 047 060 000 - 47 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 049 042 000 - 68521165 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 19532 (182 209 0) 241 Total_LBAs_Written ------ 100 253 000 - 761387688 242 Total_LBAs_Read ------ 100 253 000 - 324979309 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 6869 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6869 [8] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 03 31 b7 a7 40 00 01:10:51.991 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 27 7e f7 40 00 01:10:51.990 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 01:10:51.990 READ LOG EXT 60 00 00 00 08 00 00 07 27 7e f7 40 00 01:10:46.200 READ FPDMA QUEUED 60 00 00 00 80 00 00 03 31 b7 a7 40 00 01:10:46.082 READ FPDMA QUEUED Error 6868 [7] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 07 27 7e f7 40 00 01:10:46.200 READ FPDMA QUEUED 60 00 00 00 80 00 00 03 31 b7 a7 40 00 01:10:46.082 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 4f 40 00 01:10:46.081 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 01:10:46.081 READ LOG EXT 60 00 00 00 08 00 00 07 24 b1 4f 40 00 01:10:40.131 READ FPDMA QUEUED Error 6867 [6] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 07 24 b1 4f 40 00 01:10:40.131 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 47 40 00 01:10:40.130 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 3f 40 00 01:10:40.130 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 37 40 00 01:10:40.129 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 2f 40 00 01:10:40.127 READ FPDMA QUEUED Error 6866 [5] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 07 24 b1 27 40 00 01:10:34.305 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 1f 40 00 01:10:34.304 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 17 40 00 01:10:34.304 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 0f 40 00 01:10:34.303 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b1 07 40 00 01:10:34.301 READ FPDMA QUEUED Error 6865 [4] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 07 24 b0 ff 40 00 01:10:27.934 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 f7 40 00 01:10:27.934 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 ef 40 00 01:10:27.933 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 e7 40 00 01:10:27.933 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 df 40 00 01:10:27.930 READ FPDMA QUEUED Error 6864 [3] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 07 24 b0 d7 40 00 01:10:21.943 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 cf 40 00 01:10:21.943 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 c7 40 00 01:10:21.943 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 bf 40 00 01:10:21.941 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 b7 40 00 01:10:21.940 READ FPDMA QUEUED Error 6863 [2] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: UNC at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 07 24 b0 af 40 00 01:10:15.932 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 a7 40 00 01:10:15.931 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 9f 40 00 01:10:15.931 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 97 40 00 01:10:15.930 READ FPDMA QUEUED 60 00 00 00 08 00 00 07 24 b0 8f 40 00 01:10:15.929 READ FPDMA QUEUED Error 6862 [1] occurred at disk power-on lifetime: 9227 hours (384 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 31 b7 aa 00 00 Error: WP at LBA = 0x0331b7aa = 53589930 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 08 00 00 02 74 42 17 40 00 01:10:09.970 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 02 74 3a df 40 00 01:10:09.970 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 02 74 3a 5f 40 00 01:10:09.970 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 02 73 10 7f 40 00 01:10:09.969 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 02 73 10 4f 40 00 01:10:09.969 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 47 Celsius Power Cycle Min/Max Temperature: 24/47 Celsius Lifetime Min/Max Temperature: 16/60 Celsius Specified Max Operating Temperature: 41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (92) SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS