smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD (80 GB and above) Device Model: TOSHIBA MK1234GSX Serial Number: -- Firmware Version: AH001J User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Aug 26 18:38:10 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 435) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 86) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 1752 4 Start_Stop_Count -O--CK 100 100 000 - 6346 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 084 084 000 - 6621 10 Spin_Retry_Count PO--CK 226 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 6283 192 Power-Off_Retract_Count -O--CK 100 100 000 - 396 193 Load_Cycle_Count -O--CK 085 085 000 - 154472 194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 6/59) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 7 220 Disk_Shift -O---- 100 100 000 - 8286 222 Loaded_Hours -O--CK 086 086 000 - 5666 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 312 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 48 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 48 [47] occurred at disk power-on lifetime: 6321 hours (263 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 01 f9 d6 06 e1 00 Error: ICRC, ABRT 1 sectors at LBA = 0x01f9d606 = 33150470 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 f9 7c 97 f9 d4 50 e1 00 00:41:40.705 READ DMA c8 00 00 00 08 ee b9 ef f9 7c 90 e1 00 00:41:40.700 READ DMA c8 00 00 00 08 f8 46 ef ee b9 e8 e1 00 00:41:40.685 READ DMA c8 00 00 00 08 ef f4 bf f8 46 e8 e1 00 00:41:40.680 READ DMA c8 00 00 00 08 ef f4 ef ef f4 b8 e1 00 00:41:40.679 READ DMA Error 47 [46] occurred at disk power-on lifetime: 6272 hours (261 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 0a cb a1 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x000acba1 = 707489 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 10 0a ca 77 0a c9 a0 e0 00 03:19:43.586 READ DMA c8 00 00 00 08 0d 19 ff 0a ca 70 e0 00 03:19:43.580 READ DMA c8 00 00 00 10 07 f8 c7 0d 19 f0 e0 00 03:19:43.571 READ DMA c8 00 00 00 08 d1 be 0f 07 f8 c0 e0 00 03:19:43.563 READ DMA c8 00 00 00 18 d1 bd f7 d1 bd f8 e0 00 03:19:43.556 READ DMA Error 46 [45] occurred at disk power-on lifetime: 5967 hours (248 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 b5 1e 34 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00b51e34 = 11869748 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a8 05 f5 97 b5 1b e8 e0 00 00:02:06.829 READ DMA c8 00 00 00 18 00 3e 07 05 f5 80 e0 00 00:02:06.819 READ DMA c8 00 00 00 00 8f 9d cf 00 3d 08 e0 00 00:02:06.802 READ DMA c8 00 00 00 88 05 f8 7f 8f 9d 48 e0 00 00:02:06.784 READ DMA c8 00 00 00 10 d6 c9 ff 05 f8 70 e0 00 00:02:06.772 READ DMA Error 45 [44] occurred at disk power-on lifetime: 5821 hours (242 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 02 c1 29 af e2 00 Error: ICRC, ABRT 1 sectors at LBA = 0x02c129af = 46213551 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 40 0d 07 c1 29 80 e2 00 00:02:11.688 READ DMA c8 00 00 00 e8 40 0c 1f 40 0c 20 e3 00 00:02:11.686 READ DMA c8 00 00 00 08 40 0c 17 40 0c 18 e3 00 00:02:11.686 READ DMA c8 00 00 00 08 40 0c 0f 40 0c 10 e3 00 00:02:11.685 READ DMA c8 00 00 00 08 41 13 e7 40 0c 08 e3 00 00:02:11.685 READ DMA Error 44 [43] occurred at disk power-on lifetime: 5795 hours (241 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 01 84 11 0c e1 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0184110c = 25432332 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 10 84 09 e7 84 0f 80 e1 00 00:01:42.464 READ DMA c8 00 00 00 08 84 09 cf 84 09 e0 e1 00 00:01:42.464 READ DMA c8 00 00 00 f8 59 98 07 84 08 d8 e1 00 00:01:42.450 READ DMA c8 00 00 00 08 49 c2 6f 59 98 00 e1 00 00:01:42.440 READ DMA c8 00 00 00 38 49 c1 27 49 c2 38 e1 00 00:01:42.436 READ DMA Error 43 [42] occurred at disk power-on lifetime: 5737 hours (239 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 1c 51 ca e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x001c51ca = 1855946 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 00 1c 4c 78 e0 00 00:00:25.611 READ DMA EXT 25 00 00 03 40 00 00 00 1c 47 f0 e0 00 00:00:25.587 READ DMA EXT 25 00 00 01 a8 00 00 00 1c 46 18 e0 00 00:00:25.579 READ DMA EXT 25 00 00 02 98 00 00 00 1c 43 20 e0 00 00:00:25.569 READ DMA EXT 25 00 00 02 60 00 00 00 1c 40 b0 e0 00 00:00:25.558 READ DMA EXT Error 42 [41] occurred at disk power-on lifetime: 5674 hours (236 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 3c 3a 52 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x003c3a52 = 3947090 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 20 00 00 00 3c 38 00 e0 00 00:01:12.691 READ DMA EXT c8 00 00 00 88 3c 26 7f 3c 26 c8 e0 00 00:01:12.688 READ DMA 25 00 00 02 80 00 00 00 3c 24 00 e0 00 00:01:12.675 READ DMA EXT c8 00 00 00 88 3c 16 77 3c 16 f0 e0 00 00:01:12.672 READ DMA c8 00 00 00 00 3c 14 77 3c 15 78 e0 00 00:01:12.664 READ DMA Error 41 [40] occurred at disk power-on lifetime: 5634 hours (234 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 0d dd 99 93 ed 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0ddd9993 = 232626579 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 40 dc de 3f dd 98 40 ed 00 00:33:32.806 READ DMA c8 00 00 00 40 dc 68 bf dc de 00 ed 00 00:33:32.798 READ DMA c8 00 00 00 40 da 48 ff dc 68 80 ed 00 00:33:32.786 READ DMA c8 00 00 00 40 45 64 df da 48 c0 ed 00 00:33:32.771 READ DMA c8 00 00 00 50 45 64 87 45 64 90 ed 00 00:33:32.769 READ DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6492 - # 2 Short offline Completed without error 00% 6184 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 13 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC