smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" HDD MK.002TSKB Device Model: TOSHIBA MK2002TSKB Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MT4A User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jul 16 17:17:57 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 364) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 5257 4 Start_Stop_Count -O--CK 100 100 000 - 3166 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 2 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 035 035 000 - 26120 10 Spin_Retry_Count PO--CK 163 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1660 191 G-Sense_Error_Rate -O--CK 100 100 000 - 3 192 Power-Off_Retract_Count -O--CK 099 099 000 - 950 193 Load_Cycle_Count -O--CK 100 100 000 - 4514 194 Temperature_Celsius -O---K 100 100 000 - 47 (Min/Max 15/63) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O--CK 100 100 000 - 1 198 Offline_Uncorrectable ----CK 100 100 000 - 1 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 252204 220 Disk_Shift -O---- 100 100 000 - 42 222 Loaded_Hours -O--CK 037 037 000 - 25518 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 189 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 65535 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 65535 [248] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 6f 00 00 1e e2 fc 49 40 00 Error: ICRC, ABRT 111 sectors at LBA = 0x1ee2fc49 = 518192201 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 1e e2 fc 38 40 00 00:31:28.381 READ DMA EXT 25 00 00 00 80 00 00 1e e2 fb b8 40 00 00:31:28.223 READ DMA EXT 25 00 00 00 80 00 00 1e e2 fb 38 40 00 00:31:28.063 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:28.053 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT Error 65534 [247] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 5f 00 00 1e e2 fb d9 40 00 Error: ICRC, ABRT 95 sectors at LBA = 0x1ee2fbd9 = 518192089 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 1e e2 fb b8 40 00 00:31:28.223 READ DMA EXT 25 00 00 00 80 00 00 1e e2 fb 38 40 00 00:31:28.063 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:28.053 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 70 40 00 00:31:27.568 READ DMA EXT Error 65533 [246] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 5f 00 00 1e e2 fb 59 40 00 Error: ICRC, ABRT 95 sectors at LBA = 0x1ee2fb59 = 518191961 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 1e e2 fb 38 40 00 00:31:28.063 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:28.053 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 70 40 00 00:31:27.568 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 68 40 00 00:31:27.567 READ DMA EXT Error 65532 [245] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 5f e0 7f 40 00 Error: ICRC, ABRT at LBA = 0x005fe07f = 6283391 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 70 40 00 00:31:27.568 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 68 40 00 00:31:27.567 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 60 40 00 00:31:27.567 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 58 40 00 00:31:27.566 READ DMA EXT Error 65531 [244] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 1e e2 fb 37 40 00 Error: ICRC, ABRT at LBA = 0x1ee2fb37 = 518191927 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:26.881 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 28 40 00 00:31:26.880 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 20 40 00 00:31:26.743 READ DMA EXT b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:31:26.722 SMART ENABLE OPERATIONS ef 00 02 00 00 00 00 00 00 00 00 00 00 00:31:26.722 SET FEATURES [Enable write cache] Error 65530 [243] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 5f e0 1f 40 00 Error: ICRC, ABRT at LBA = 0x005fe01f = 6283295 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f e0 18 40 00 00:30:26.556 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 10 40 00 00:30:26.555 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 08 40 00 00:30:26.555 READ DMA EXT 25 00 00 00 08 00 00 00 5f e0 00 40 00 00:30:26.554 READ DMA EXT 25 00 00 00 08 00 00 00 5f df f8 40 00 00:30:26.553 READ DMA EXT Error 65529 [242] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 1e e2 fb 27 40 00 Error: ICRC, ABRT at LBA = 0x1ee2fb27 = 518191911 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 1e e2 fb 20 40 00 00:30:26.089 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 18 40 00 00:30:26.088 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 10 40 00 00:30:26.087 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 08 40 00 00:30:26.075 READ DMA EXT 25 00 00 00 08 00 00 00 5f df d8 40 00 00:30:25.373 READ DMA EXT Error 65528 [241] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 5f df df 40 00 Error: ICRC, ABRT at LBA = 0x005fdfdf = 6283231 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f df d8 40 00 00:30:25.373 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 08 40 00 00:30:24.913 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fb 00 40 00 00:30:24.912 READ DMA EXT 25 00 00 00 08 00 00 1e e2 fa f8 40 00 00:30:24.905 READ DMA EXT 25 00 00 00 08 00 00 00 5f df d8 40 00 00:30:24.218 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 47 Celsius Power Cycle Min/Max Temperature: 38/52 Celsius Lifetime Min/Max Temperature: 15/63 Celsius Under/Over Temperature Limit Count: 0/884 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (229) SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0008 4 0 Device-to-host non-data FIS retries 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS