smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..34GSX Device Model: TOSHIBA MK8034GSX Serial Number: -- Firmware Version: AH301H User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat Sep 10 11:19:28 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 61) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 050 - 0 2 Throughput_Performance POS--- 100 100 050 - 0 3 Spin_Up_Time PO---- 100 100 002 - 1662 4 Start_Stop_Count -O--CK 100 100 000 - 22136 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 2 7 Seek_Error_Rate POSR-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 072 072 000 - 11224 10 Spin_Retry_Count PO--C- 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 7641 191 G-Sense_Error_Rate -O--CK 100 100 000 - 3833 192 Power-Off_Retract_Count -O--CK 098 098 000 - 1196 193 Load_Cycle_Count -O--CK 045 045 000 - 553797 194 Temperature_Celsius -O---K 100 100 000 - 23 (Min/Max 5/60) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 111 220 Disk_Shift -O---- 100 100 000 - 102 222 Loaded_Hours -O--CK 080 080 000 - 8054 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 320 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 119 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 119 [118] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.721 WRITE DMA EXT 35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.720 WRITE DMA EXT ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:23.719 SET FEATURES [Set transfer mode] ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:23.714 [VENDOR SPECIFIC] 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.509 WRITE DMA EXT Error 118 [117] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.509 WRITE DMA EXT ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:23.508 SET FEATURES [Set transfer mode] ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:23.503 [VENDOR SPECIFIC] 35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.248 WRITE DMA EXT 35 00 00 00 10 00 00 00 00 97 aa e0 00 00:00:23.247 WRITE DMA EXT Error 117 [116] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 a4 29 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000a429 = 42025 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.248 WRITE DMA EXT 35 00 00 00 10 00 00 00 00 97 aa e0 00 00:00:23.247 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 b0 6a e0 00 00:00:23.247 WRITE DMA EXT 35 00 00 00 01 00 00 00 00 00 03 e0 00 00:00:23.247 WRITE DMA EXT 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:18.010 WRITE DMA EXT Error 116 [115] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.542 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 4a a6 e0 00 00:00:17.542 WRITE DMA EXT ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:17.542 SET FEATURES [Set transfer mode] ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:17.536 [VENDOR SPECIFIC] 35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.320 WRITE DMA EXT Error 115 [114] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.320 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 00 22 e0 00 00:00:17.320 WRITE DMA EXT ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:17.319 SET FEATURES [Set transfer mode] ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:17.314 [VENDOR SPECIFIC] 35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.096 WRITE DMA EXT Error 114 [113] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.096 WRITE DMA EXT 35 00 00 00 80 00 00 00 00 b4 aa e0 00 00:00:17.094 WRITE DMA EXT 35 00 00 00 80 00 00 00 00 b5 2a e0 00 00:00:17.092 WRITE DMA EXT 25 00 00 00 08 00 00 00 00 9c aa e0 00 00:00:17.090 READ DMA EXT 25 00 00 00 08 00 00 00 00 9c 2a e0 00 00:00:17.081 READ DMA EXT Error 113 [112] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.839 WRITE DMA EXT 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.787 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 97 ea e0 00 00:00:16.787 WRITE DMA EXT ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:16.786 SET FEATURES [Set transfer mode] ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:16.781 [VENDOR SPECIFIC] Error 112 [111] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.582 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 9e aa e0 00 00:00:16.531 WRITE DMA EXT 35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.382 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 4a a6 e0 00 00:00:16.382 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 00 22 e0 00 00:00:16.381 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC