smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE3 Serial ATA Device Model: WDC WD2502ABYS-18B7A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Add. Product Id: DELL™ Firmware Version: 02.03B04 User Capacity: 250,000,000,000 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Fri Apr 5 17:10:21 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 200 199 021 - 966 4 Start_Stop_Count -O--CK 100 100 000 - 127 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 117079 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 125 192 Power-Off_Retract_Count -O--CK 200 200 000 - 112 193 Load_Cycle_Count -O--CK 200 200 000 - 127 194 Temperature_Celsius -O---K 111 090 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 84 00 1d 98 40 00 Error: WP at LBA = 0x84001d98 = 2214600088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 18 00 08 00 00 00 66 ec 58 c0 00 7d+01:28:54.634 WRITE FPDMA QUEUED 60 00 10 00 00 00 00 00 1d 84 98 40 00 7d+01:28:53.534 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:28:53.495 FLUSH CACHE EXT 61 00 08 00 00 00 00 00 66 eb d8 40 00 7d+01:28:53.494 WRITE FPDMA QUEUED 61 00 18 00 00 00 00 00 d0 bf a0 40 00 7d+01:28:53.494 WRITE FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 eb 00 66 f0 40 00 Error: IDNF at LBA = 0xeb0066f0 = 3942672112 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 18 00 08 00 00 00 66 eb f0 c0 00 7d+01:23:28.148 WRITE FPDMA QUEUED 60 00 10 00 00 00 00 00 1d b9 e8 40 00 7d+01:23:28.101 READ FPDMA QUEUED e5 00 00 00 00 00 00 00 00 00 00 00 00 7d+01:23:26.060 CHECK POWER MODE 61 00 08 00 00 00 00 00 6d 50 70 40 00 7d+01:23:25.008 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:23:25.008 FLUSH CACHE EXT Error 5 [4] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b9 00 1d e8 40 00 Error: UNC at LBA = 0xb9001de8 = 3103792616 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 08 00 00 00 be 54 a0 40 00 7d+01:21:31.663 READ FPDMA QUEUED 60 00 10 00 00 00 00 00 1d b9 e8 40 00 7d+01:21:30.568 READ FPDMA QUEUED 60 00 10 00 00 00 00 00 be 55 10 40 00 7d+01:21:30.555 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:21:28.131 FLUSH CACHE EXT 61 00 08 00 00 00 00 00 66 eb f0 40 00 7d+01:21:28.131 WRITE FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 87 00 1d 28 40 00 Error: UNC at LBA = 0x87001d28 = 2264931624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 00 00 00 00 1d 87 28 40 00 7d+01:18:43.199 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:18:43.169 FLUSH CACHE EXT 61 00 18 00 00 00 00 00 d1 0d f8 40 00 7d+01:18:43.169 WRITE FPDMA QUEUED 61 00 10 00 00 00 00 00 66 eb f8 c0 00 7d+01:18:43.160 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:18:41.281 FLUSH CACHE EXT Error 3 [2] occurred at disk power-on lifetime: 9161 hours (381 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 87 00 1d 28 40 00 Error: UNC at LBA = 0x87001d28 = 2264931624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 00 00 00 00 1d 87 28 40 00 7d+01:08:33.961 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:08:33.924 FLUSH CACHE EXT 61 00 38 00 00 00 00 00 66 eb f0 40 00 7d+01:08:33.923 WRITE FPDMA QUEUED 61 00 18 00 00 00 00 01 06 d3 98 40 00 7d+01:08:33.923 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:08:33.514 FLUSH CACHE EXT Error 2 [1] occurred at disk power-on lifetime: 9161 hours (381 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 84 00 1d 98 40 00 Error: UNC at LBA = 0x84001d98 = 2214600088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 00 00 00 00 1d 84 98 40 00 7d+01:03:23.674 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:03:23.637 FLUSH CACHE EXT 61 00 18 00 00 00 00 00 d0 bf a0 40 00 7d+01:03:23.637 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 00 66 ec 58 c0 00 7d+01:03:23.625 WRITE FPDMA QUEUED e5 00 00 00 00 00 00 00 00 00 00 00 00 7d+01:03:23.389 CHECK POWER MODE Error 1 [0] occurred at disk power-on lifetime: 9161 hours (381 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 87 00 1d 28 40 00 Error: UNC at LBA = 0x87001d28 = 2264931624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 00 00 00 00 1d 87 28 40 00 7d+00:53:13.682 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+00:53:13.657 FLUSH CACHE EXT 61 00 18 00 00 00 00 00 d1 0d f8 40 00 7d+00:53:13.656 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 00 6f 4f f0 40 00 7d+00:53:13.358 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 00 6d f7 d0 40 00 7d+00:53:13.358 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 15083 - # 2 Extended offline Completed without error 00% 51 - # 3 Short offline Completed without error 00% 51 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 28/42 Celsius Lifetime Min/Max Temperature: 29/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (55) SCT Error Recovery Control: Read: 80 (8.0 seconds) Write: 80 (8.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x8000 4 4475449 Vendor specific