smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p2 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68AX9N0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu May 20 10:03:16 2021 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (39720) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 399) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 175 170 021 - 6250 4 Start_Stop_Count -O--CK 098 098 000 - 2530 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 009 009 000 - 66709 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 866 192 Power-Off_Retract_Count -O--CK 200 200 000 - 313 193 Load_Cycle_Count -O--CK 200 200 000 - 2216 194 Temperature_Celsius -O---K 118 095 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 7 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1637 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1637 [4] occurred at disk power-on lifetime: 52012 hours (2167 days + 4 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 cd 36 da e0 40 00 Error: UNC at LBA = 0xcd36dae0 = 3442924256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 90 00 00 cd 36 e4 d0 40 08 8d+02:50:03.842 READ FPDMA QUEUED 60 01 00 00 88 00 00 cd 36 e3 d0 40 08 8d+02:50:03.841 READ FPDMA QUEUED 60 01 00 00 80 00 00 cd 36 e2 d0 40 08 8d+02:50:03.841 READ FPDMA QUEUED 60 01 00 00 78 00 00 cd 36 e1 d0 40 08 8d+02:50:03.841 READ FPDMA QUEUED 60 01 00 00 70 00 00 cd 36 e0 d0 40 08 8d+02:50:03.841 READ FPDMA QUEUED Error 1636 [3] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 46 00 00 00 00 00 00 40 00 2d+23:38:18.989 SET FEATURES [Set transfer mode] ef 00 03 00 46 00 00 00 00 00 00 40 00 2d+23:38:18.984 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 40 00 2d+23:38:18.984 IDENTIFY DEVICE ef 00 03 00 0c 00 00 00 00 00 00 00 00 2d+23:37:34.199 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+23:37:34.197 IDENTIFY DEVICE Error 1635 [2] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 46 00 00 00 00 00 00 40 00 2d+23:38:18.984 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 40 00 2d+23:38:18.984 IDENTIFY DEVICE ef 00 03 00 0c 00 00 00 00 00 00 00 00 2d+23:37:34.199 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+23:37:34.197 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+23:36:11.289 FLUSH CACHE EXT Error 1634 [1] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 0c 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 0c 00 00 00 00 00 00 00 00 2d+23:37:34.199 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+23:37:34.197 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+23:36:11.289 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+23:36:11.284 FLUSH CACHE EXT 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.279 READ LOG EXT Error 1633 [0] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+23:36:11.289 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+23:36:11.284 FLUSH CACHE EXT 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.279 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:11.162 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.157 READ LOG EXT Error 1632 [23] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+23:36:11.284 FLUSH CACHE EXT 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.279 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:11.162 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.157 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:11.040 READ FPDMA QUEUED Error 1631 [22] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:11.162 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.157 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:11.040 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.035 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:10.918 READ FPDMA QUEUED Error 1630 [21] occurred at disk power-on lifetime: 20434 hours (851 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:11.040 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:11.035 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:10.918 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 2d+23:36:10.913 READ LOG EXT 60 01 00 00 20 00 01 5d 50 a0 80 40 08 2d+23:36:10.796 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1163 - # 2 Short offline Completed without error 00% 1139 - # 3 Short offline Completed without error 00% 1115 - # 4 Short offline Completed without error 00% 1091 - # 5 Short offline Completed without error 00% 1067 - # 6 Short offline Completed without error 00% 1043 - # 7 Short offline Completed without error 00% 1019 - # 8 Short offline Completed without error 00% 995 - # 9 Short offline Completed without error 00% 971 - #10 Short offline Completed without error 00% 947 - #11 Short offline Completed without error 00% 923 - #12 Short offline Completed without error 00% 899 - #13 Short offline Completed without error 00% 875 - #14 Short offline Completed without error 00% 851 - #15 Short offline Completed without error 00% 827 - #16 Short offline Completed without error 00% 803 - #17 Short offline Completed without error 00% 779 - #18 Short offline Completed without error 00% 756 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/36 Celsius Lifetime Min/Max Temperature: 6/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (277) SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1474335 Vendor specific