smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD5000BEVT-75A0RT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jul 7 21:09:30 2021 +0430 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12780) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 149) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 328 3 Spin_Up_Time POS--K 192 180 021 - 1375 4 Start_Stop_Count -O--CK 088 088 000 - 12564 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 084 084 000 - 12278 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 088 088 000 - 12193 191 G-Sense_Error_Rate -O--CK 001 001 000 - 8821 192 Power-Off_Retract_Count -O--CK 195 195 000 - 4062 193 Load_Cycle_Count -O--CK 124 124 000 - 230844 194 Temperature_Celsius -O---K 096 078 000 - 51 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 085 085 000 - 11415 241 Total_LBAs_Written -O--CK 200 200 000 - 72320439185 242 Total_LBAs_Read -O--CK 200 200 000 - 93579150021 254 Free_Fall_Sensor -O--CK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1269 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1269 [20] occurred at disk power-on lifetime: 11972 hours (498 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 f0 00 00 00 62 be 6b 40 00 01:00:24.825 READ FPDMA QUEUED 60 00 01 00 e8 00 00 00 62 be 6a 40 00 01:00:24.824 READ FPDMA QUEUED 60 00 01 00 e0 00 00 00 62 be 69 40 00 01:00:24.824 READ FPDMA QUEUED 60 00 01 00 d8 00 00 00 62 be 68 40 00 01:00:24.824 READ FPDMA QUEUED 60 00 01 00 d0 00 00 00 62 be 67 40 00 01:00:24.823 READ FPDMA QUEUED Error 1268 [19] occurred at disk power-on lifetime: 11972 hours (498 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 50 00 00 00 62 be 60 40 00 01:00:22.070 READ FPDMA QUEUED 61 00 08 00 48 00 00 03 1e 4b 28 40 00 01:00:22.069 WRITE FPDMA QUEUED 61 00 20 00 40 00 00 0a c4 98 20 40 00 01:00:22.068 WRITE FPDMA QUEUED 61 00 20 00 38 00 00 0a c6 e8 80 40 00 01:00:22.068 WRITE FPDMA QUEUED 61 00 18 00 30 00 00 01 15 31 30 40 00 01:00:22.067 WRITE FPDMA QUEUED Error 1267 [18] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e8 00 00 00 62 be 00 40 00 00:56:28.306 READ FPDMA QUEUED 60 01 00 00 e0 00 00 02 cd ca 00 40 00 00:56:28.290 READ FPDMA QUEUED 60 00 02 00 d8 00 00 00 62 be ea 40 00 00:56:28.269 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:28.268 READ LOG EXT 60 01 00 00 d0 00 00 00 62 be 00 40 00 00:56:25.826 READ FPDMA QUEUED Error 1266 [17] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 d0 00 00 00 62 be 00 40 00 00:56:25.826 READ FPDMA QUEUED 60 01 00 00 c8 00 00 01 f6 ae 00 40 00 00:56:25.815 READ FPDMA QUEUED 60 00 02 00 c0 00 00 00 62 be d6 40 00 00:56:25.794 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:25.793 READ LOG EXT 60 01 00 00 b8 00 00 00 62 be 00 40 00 00:56:23.343 READ FPDMA QUEUED Error 1265 [16] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 b8 00 00 00 62 be 00 40 00 00:56:23.343 READ FPDMA QUEUED 60 01 00 00 b0 00 00 02 5e ed 00 40 00 00:56:23.328 READ FPDMA QUEUED 60 00 02 00 a8 00 00 00 62 be ce 40 00 00:56:23.308 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:23.307 READ LOG EXT 60 01 00 00 a0 00 00 00 62 be 00 40 00 00:56:20.869 READ FPDMA QUEUED Error 1264 [15] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 a0 00 00 00 62 be 00 40 00 00:56:20.869 READ FPDMA QUEUED 60 01 00 00 98 00 00 00 21 db 00 40 00 00:56:20.864 READ FPDMA QUEUED 60 01 00 00 90 00 00 00 21 da 00 40 00 00:56:20.863 READ FPDMA QUEUED 60 01 00 00 88 00 00 00 21 d9 00 40 00 00:56:20.858 READ FPDMA QUEUED 60 01 00 00 80 00 00 00 21 d8 00 40 00 00:56:20.857 READ FPDMA QUEUED Error 1263 [14] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 50 00 00 00 62 be 00 40 00 00:56:18.379 READ FPDMA QUEUED 60 00 02 00 48 00 00 00 62 be a6 40 00 00:56:18.357 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:18.356 READ LOG EXT 60 01 00 00 40 00 00 00 62 be 00 40 00 00:56:15.915 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 62 be 9a 40 00 00:56:15.893 READ FPDMA QUEUED Error 1262 [13] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 40 00 00 00 62 be 00 40 00 00:56:15.915 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 62 be 9a 40 00 00:56:15.893 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:15.892 READ LOG EXT 60 01 00 00 30 00 00 00 62 be 00 40 00 00:56:13.462 READ FPDMA QUEUED 60 00 02 00 28 00 00 00 62 be 96 40 00 00:56:13.440 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11149 - # 2 Short offline Completed without error 00% 11130 - # 3 Short offline Completed without error 00% 11114 - # 4 Short offline Completed without error 00% 11098 - # 5 Extended offline Completed without error 00% 11087 - # 6 Short offline Completed without error 00% 11077 - # 7 Short offline Completed without error 00% 11073 - # 8 Short offline Completed without error 00% 11064 - # 9 Short offline Completed without error 00% 11051 - #10 Short offline Completed without error 00% 11037 - #11 Short offline Completed without error 00% 11020 - #12 Short offline Completed without error 00% 11005 - #13 Short offline Completed without error 00% 10988 - #14 Short offline Completed without error 00% 10978 - #15 Offline Interrupted (host reset) 00% 6458 - #16 Short offline Completed without error 00% 6028 - #17 Short offline Completed without error 00% 3880 - #18 Short offline Completed without error 00% 3317 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 51 Celsius Power Cycle Min/Max Temperature: 31/55 Celsius Lifetime Min/Max Temperature: 31/70 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (12) SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 10644 Vendor specific