smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs Device Model: CFast 3ME3 Serial Number: -- LU WWN Device Id: 5 24693e ... Firmware Version: S15604 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Apr 25 22:33:00 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Read SCT Status failed: Input/output error Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 32) seconds. Offline data collection capabilities: (0x0b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. No Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 2 Throughput_Performance ------ 000 000 000 - 0 3 Spin_Up_Time ------ 000 000 000 - 0 5 Later_Bad_Block -O---- 100 100 000 - 0 7 Seek_Error_Rate ------ 000 000 000 - 0 8 Seek_Time_Performance ------ 000 000 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 255 10 Spin_Retry_Count ------ 000 000 000 - 0 12 Power_Cycle_Count -O---- 100 100 000 - 180 168 SATA_PHY_Error_Count ------ 000 000 000 - 0 169 Remaining_Lifetime_Perc ------ 037 000 000 - 40681930227712 175 Bad_Cluster_Table_Count ------ 000 000 000 - 0 192 Power-Off_Retract_Count ------ 000 000 000 - 0 194 Temperature_Celsius ------ 055 100 000 - 0 (3 100 0 0 0) 197 Current_Pending_Sector ------ 000 000 000 - 0 240 Write_Head ------ 000 085 000 - 46257291 225 Data_Log_Write_Count ------ 000 000 000 - 0 170 Spare_Block_Count PO---- 000 000 --- - 3211264 173 Unknown_Attribute -O--C- 000 000 --- - 125896532 229 Flash_ID -O---- 000 000 --- - 0x507a93953a98 236 Unknown_Attribute -O---- 000 000 --- - 0 235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 --- - 0 0 0 176 RANGE_RECORD_Count ------ 000 000 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: Input/output error ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Input/output error Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported Read SCT Status failed: Input/output error Read SCT Status failed: Input/output error SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Input/output error Read SATA Phy Event Counters failed