smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p20-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SATADOM-ML 3SE Serial Number: -- Firmware Version: S130710K User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Unavailable Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 28 03:57:36 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Read SCT Status failed: Input/output error Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 32) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 2 Throughput_Performance ------ 000 000 000 - 0 3 Spin_Up_Time ------ 000 000 000 - 0 5 Reallocated_Sector_Ct ------ 000 000 000 - 0 7 Unknown_SSD_Attribute ------ 000 000 000 - 0 8 Unknown_SSD_Attribute ------ 000 000 000 - 0 9 Power_On_Hours ------ 000 000 000 - 11292 10 Unknown_SSD_Attribute ------ 000 000 000 - 0 12 Power_Cycle_Count ------ 000 000 000 - 79 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 168 Unknown_Attribute ------ 000 000 000 - 0 169 Unknown_Attribute ------ 000 000 000 - 0 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 175 Program_Fail_Count_Chip ------ 100 000 000 - 0 192 Power-Off_Retract_Count ------ 000 000 000 - 0 1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552 197 Current_Pending_Sector ------ 000 000 000 - 0 240 Unknown_SSD_Attribute ------ 000 000 000 - 0 170 Unknown_Attribute PO---- 100 100 --- - 2359296 173 Unknown_Attribute -O--C- 100 100 --- - 125372191 229 Unknown_Attribute -O---- 100 100 --- - 8830595015064 236 Unknown_Attribute -O---- 100 100 --- - 0 235 Unknown_Attribute -O---- 100 000 --- - 0 176 Erase_Fail_Count_Chip ------ 100 000 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: Input/output error General Purpose Log Directory Version 1 Address Access R/W Size Description 0x00 GPL R/O 1 Log Directory 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL R/W 16 Host vendor specific log 0xe0 GPL R/W 1 SCT Command/Status 0xe1 GPL R/W 1 SCT Data Transfer ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error Read SMART Extended Comprehensive Error Log failed SMART Error Log not supported ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error Read SMART Extended Self-test Log failed SMART Self-test Log not supported Selective Self-tests/Logging not supported Read SCT Status failed: Input/output error Read SCT Status failed: Input/output error SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 7 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC