smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs Device Model: SATADOM-SL 3IE3 V2 Serial Number: -- LU WWN Device Id: 5 24693f ... Firmware Version: S560301N User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Unavailable Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 30 09:53:50 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Read SCT Status failed: Input/output error Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 32) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 2 Throughput_Performance ------ 000 000 000 - 0 3 Spin_Up_Time ------ 000 000 000 - 0 5 Later_Bad_Block PO--C- 100 100 001 - 0 7 Seek_Error_Rate ------ 000 000 000 - 0 8 Seek_Time_Performance ------ 000 000 000 - 0 9 Power_On_Hours -O---- 222 000 000 - 10718 10 Spin_Retry_Count ------ 000 000 000 - 0 12 Power_Cycle_Count -O---- 139 000 000 - 139 163 Total_Bad_Block_Count ------ 000 000 000 - 38 168 SATA_PHY_Error_Count ------ 000 000 000 - 0 233 Media_Wearout_Indicator ------ 099 000 000 - 99 175 Bad_Cluster_Table_Count ------ 000 000 000 - 0 192 Power-Off_Retract_Count ------ 000 000 000 - 0 194 Temperature_Celsius ------ 030 100 000 - 30 (3 100 0 0 0) 203 Run_Out_Cancel ------ 000 100 000 - 0 225 Data_Log_Write_Count ------ 000 006 000 - 1892067 240 Write_Head ------ 000 000 000 - 0 165 Max_Erase_Count -O---- 010 001 000 - 10 167 Average_Erase_Count -O---- 004 001 000 - 4 170 Spare_Block_Count PO---- 100 001 000 - 199 171 Program_Fail_Count -O---- 000 001 000 - 0 172 Erase_Fail_Count -O---- 000 001 000 - 0 176 RANGE_RECORD_Count ------ 100 001 000 - 0 187 Reported_Uncorrect -O---- 000 001 000 - 0 229 Flash_ID -O---- 100 001 000 - 0xd17a93953c98 232 Spares_Remaining_Perc PO---- 100 001 000 - 0 235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0 241 Host_Writes_32MiB -O---- 100 001 000 - 7390 242 Host_Reads_32MiB -O---- 100 001 000 - 6779 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: Input/output error General Purpose Log Directory Version 1 Address Access R/W Size Description 0x00 GPL R/O 1 Log Directory 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL R/W 16 Host vendor specific log 0xe0 GPL R/W 1 SCT Command/Status 0xe1 GPL R/W 1 SCT Data Transfer ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error Read SMART Extended Comprehensive Error Log failed SMART Error Log not supported ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error Read SMART Extended Self-test Log failed SMART Self-test Log not supported Selective Self-tests/Logging not supported Read SCT Status failed: Input/output error Read SCT Status failed: Input/output error SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC