smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue and Green SSDs Device Model: WDC WDS100T2B0A-00SM50 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 401000WD User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 25 08:54:21 2020 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 2952 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 160 165 Block_Erase_Count 0x0032 100 100 --- Old_age Always - 1179656 166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 0 167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 24 168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 1 169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 416 170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0 171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 173 Average_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 0 174 Unexpected_Power_Loss 0x0032 100 100 --- Old_age Always - 2 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 070 037 --- Old_age Always - 30 (Min/Max 11/37) 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 230 Media_Wearout_Indicator 0x0032 001 001 --- Old_age Always - 0x000100000001 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 175 234 NAND_GB_Written_SLC 0x0032 100 100 --- Old_age Always - 201 241 Host_Writes_GiB 0x0030 253 253 --- Old_age Offline - 196 242 Host_Reads_GiB 0x0030 253 253 --- Old_age Offline - 36 244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported