diff --git a/gramps2/INSTALL b/gramps2/INSTALL index 23e5f25d0..b0331fbd6 100644 --- a/gramps2/INSTALL +++ b/gramps2/INSTALL @@ -1,236 +1,56 @@ -Installation Instructions -************************* +$Id$ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. +This file contains some useful details on the installation from source code +for GRAMPS. It does not cover installation of a pre-built binary package. +For that use your package manager, the rest is already done by the packager. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. -Basic Installation -================== +configure vs autogen scripts +---------------------------- +If you are building from released tarball, you should be able to just +run "./configure && make". However, if you're building from the SVN, +the configure is not present. You should auto-generate it by +running ./autogen.sh and then "make" and, finally, "make install". -These are generic installation instructions. - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). +Regular vs local installation +----------------------------- +This version of gramps requires, among others, the two things to be done: +gconf schemas and mime types for gramps MUST be properly installed. +The usual ./configure, make, and make install as a root should do the trick. +But be careful if you're using the non-default options or would like +to install without being root. - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is -disabled by default to prevent problems with accidental use of stale -cache files.) +The latter is possible, but you should supply additional arguments to +autogen or configure: + --with-gconf-source=xml::$HOME/.gconf + --with-gconf-schema-file-dir=$HOME + --with-mime-dir=$HOME/.local/share/mime +Most likely, such local install will also need some prefix with write +permissions for you: + --prefix=$HOME/my_gramps_path - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. +Whether you're doing local install or regular install, +YOU MUST INSTALL GCONF SCHEMAS AND MIME TYPES. +YOU HAVE BEEN WARNED! - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: - - /bin/bash ./configure CONFIG_SHELL=/bin/bash - -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. +Packager's issues +------------------ +The above mentioned gconf schemas and mime types must be installed. +However, the update-mime-database and the gconftool-2 calls to process +the newly installed types and schemas must be done in POST-INSTALLATION. +In packager's world, the install happens on packager's machine +into something like /tmp/gramps-tmp. However, the postinstall +should happen on the user's machine. +To assist with that, there's an argument available in configure +(or autogen, which will pass it to configure) which disables +the gconf schema and mime type processing: + --enable-packager-mode +This argument should disable postinstall calls made during +make install, and print a nasty warning during configure. +IT IS PACKAGER'S RESPONSIBILITY to follow the advice given +by the configure output and to copy the appropriate code +from the src/data/Makefile.am into the pos-tinstall (and post-uninstall) +of the particular packaging system. diff --git a/gramps2/README b/gramps2/README index 91203cd3e..e077324d2 100644 --- a/gramps2/README +++ b/gramps2/README @@ -20,33 +20,20 @@ The following packages are *STRONGLY RECOMMENDED* to be installed: Documentation --------------------------------- -Gramps documentation is supplied in the form of XML files, which will be -installed in the GNOME help path(*). Gnome help browser (Yelp) uses these -(properly installed) XML files to display the documentation. +The User Manual is now maintained, built and installed using gnome-doc-utils. +Please see the documentation for the gnome-doc-utils package to learn +how this works. -Of course, current HTML documentation can also be found on the gramps website, +Current HTML documentation can also be found on the gramps website, http://gramps-project.org/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=7 -(*) More precisely, they are installed -in ${prefix}/share/gramps/gnome/help/gramps, -where ${prefix} is given by the --prefix= option -to configure (defaults to /usr). Building on non-Linux systems: i18n support and GNU make -------------------------------------------------------- +If make fails, use gmake (the name FreeBSD gives to GNU make) instead. -Linux has libintl (GNU gettext) built-in the C library. Other systems -are likely to have libintl as a separate or optional library. Also, -other systems may have a different make utility. -On those systems, like FreeBSD, you must tell configure where to find -the libintl library and the libintl.h include file: - -CPPFLAGS="-I/usr/local/include -L/usr/local/lib" ./configure --prefix=/usr/local - -Once you have done this, if make fails, use gmake (the name FreeBSD -gives to GNU make) instead. -------------------------------- Donald Allingham