diff --git a/src/plugins/docgen/LaTeXDoc.py b/src/plugins/docgen/LaTeXDoc.py index 3fdc0f2c4..14cef5b8b 100644 --- a/src/plugins/docgen/LaTeXDoc.py +++ b/src/plugins/docgen/LaTeXDoc.py @@ -1,4 +1,6 @@ # +# -*- coding: utf-8 -*- +# # Gramps - a GTK+/GNOME based genealogy program # # Copyright (C) 2000-2006 Donald N. Allingham @@ -8,6 +10,7 @@ # 2003 Alex Roitman # 2009 Benny Malengier # 2010 Peter Landgren +# 2011 Harald Rosemann # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -30,15 +33,15 @@ #------------------------------------------------------------------------ # -# python modules +# python modules # #------------------------------------------------------------------------ from gen.ggettext import gettext as _ from bisect import bisect -#------------------------------------------------------------------------ +#----------------------------------------------------------------------- - # -# gramps modules +# gramps modules # #------------------------------------------------------------------------ from gen.plug.docgen import BaseDoc, TextDoc, PAPER_LANDSCAPE, FONT_SANS_SERIF @@ -46,6 +49,35 @@ from gen.plug.docbackend import DocBackend import ImgManip import Errors import Utils +import re + +#------------------------------------------------------------------------ +# +# Special settings for LaTeX output +# +#------------------------------------------------------------------------ +# If there is one overwide column consuming too much space of paperwidth its +# line(s) must be broken and wrapped in a 'minipage' with appropriate width. +# The table construction beneath does this job but for now must know which +# column. (Later it shall be determined in another way) +# As to gramps in most cases it is the last column, hence: + +MINIPAGE_COL = -1 # Python indexing: last one + +# In trunk there is a 'LastChangeReport' where the last but one +# is such a column. If you like, you can instead choose this setting: + +# MINIPAGE_COL = -2 # Python indexing: last but one + +# ---------------------------------- +# For an interim mark of an intended linebreak I use a special pattern. It +# shouldn't interfere with normal text. The charackter '&' is used in LaTeX +# for column separation in tables and may occur there in series. The pattern +# is used here before column separation is set. On the other hand incoming +# text can't show this pattern for it would have been replaced by '\&\&'. +# So the choosen pattern will do the job without confusion: + +PAT_FOR_LINE_BREAK = '&&' #------------------------------------------------------------------------ # @@ -54,7 +86,29 @@ import Utils #------------------------------------------------------------------------ _LATEX_TEMPLATE_1 = '\\documentclass[%s]{article}\n' -_LATEX_TEMPLATE = '''\\usepackage[T1]{fontenc} +_LATEX_TEMPLATE = '''% +% +% Vertical spacing between paragraphs: +% take one of three possibilities or modify to your taste: +%\\setlength{\\parskip}{1.0ex plus0.2ex minus0.2ex} +\\setlength{\\parskip}{1.5ex plus0.3ex minus0.3ex} +%\\setlength{\\parskip}{2.0ex plus0.4ex minus0.4ex} +% +% Vertical spacing between lines: +% take one of three possibilities or modify to your taste: +\\renewcommand{\\baselinestretch}{1.0} +%\\renewcommand{\\baselinestretch}{1.1} +%\\renewcommand{\\baselinestretch}{1.2} +% +% Indentation; substitute for '1cm' of gramps +% take one of three possibilities or modify to your taste: +\\newlength{\\grbaseindent}% +\\setlength{\\grbaseindent}{3.0em} +%\\setlength{\\grbaseindent}{2.5em} +%\\setlength{\\grbaseindent}{2.0em} +% +% +\\usepackage[T1]{fontenc} % % We use latin1 encoding at a minimum by default. % GRAMPS uses unicode UTF-8 encoding for its @@ -71,7 +125,8 @@ _LATEX_TEMPLATE = '''\\usepackage[T1]{fontenc} %\\usepackage[latin1,utf8]{inputenc} \\usepackage{graphicx} % Extended graphics support \\usepackage{longtable} % For multi-page tables -\\usepackage{calc} % For margin indents +\\usepackage{calc} % For some calculations +\\usepackage{ifthen} % For table width calculations % % Depending on your LaTeX installation, the margins may be too % narrow. This can be corrected by uncommenting the following @@ -80,19 +135,50 @@ _LATEX_TEMPLATE = '''\\usepackage[T1]{fontenc} %\\addtolength{\\oddsidemargin}{-0.5in} %\\addtolength{\\textwidth}{1.0in} % -% Create a margin-adjusting command that allows LaTeX -% to behave like the other gramps-supported output formats -\\newlength{\\leftedge} -\\setlength{\\leftedge}{\\parindent} -\\newlength{\\grampstext} -\\setlength{\\grampstext}{\\textwidth} -\\newcommand{\\grampsindent}[1]{% - \\setlength{\\parindent}{\\leftedge + #1}% - \\setlength{\\textwidth}{\\grampstext - #1}% -} - +% +% New lengths and commands +% for calculating widths and struts in tables +% +\\newlength{\\grtempint}% +\\newlength{\\grminpgwidth}% +\\setlength{\\grminpgwidth}{0.8\\textwidth} +% +\\newcommand{\\inittabvars}[2]{% + \\ifthenelse{\\isundefined{#1}}% + {\\newlength{#1}}{}% + \\setlength{#1}{#2}% +}% +% +\\newcommand{\\grcalctextwidth}[2]{% + \\settowidth{\\grtempint}{#1}% #1: text + \\ifthenelse{\\lengthtest{\\grtempint > #2}}% #2: grcolwidth_ + {\\setlength{#2}{\\grtempint}}{}% +}% +% +\\newcommand{\\grminvaltofirst}[2]{% + \\setlength{\\grtempint}{#2}% + \\ifthenelse{\\lengthtest{#1 > \\grtempint}}% + {\\setlength{#1}{\\grtempint}}{}% +}% +% +\\newcommand{\\grmaxvaltofirst}[2]{% + \\setlength{\\grtempint}{#2}% + \\ifthenelse{\\lengthtest{#1 < \\grtempint}}% + {\\setlength{#1}{\\grtempint}}{}% +}% +% +% lift width heigh +\\newcommand{\\tabheadstrutceil}{% + \\rule[0.0ex]{0.00em}{3.5ex}}% +\\newcommand{\\tabheadstrutfloor}{% + \\rule[-2.0ex]{0.00em}{2.5ex}}% +\\newcommand{\\tabrowstrutceil}{% + \\rule[0.0ex]{0.00em}{3.0ex}}% +\\newcommand{\\tabrowstrutfloor}{% + \\rule[-1.0ex]{0.00em}{3.0ex}}% +% +% \\begin{document} - ''' @@ -102,7 +188,7 @@ _LATEX_TEMPLATE = '''\\usepackage[T1]{fontenc} # #------------------------------------------------------------------------ -# These tables coorelate font sizes to Latex. The first table contains +# These tables correlate font sizes to Latex. The first table contains # typical font sizes in points. The second table contains the standard # Latex font size names. Since we use bisect to map the first table to the # second, we are guaranteed that any font less than 6 points is 'tiny', fonts @@ -117,6 +203,90 @@ _FONT_NAMES = ['tiny', 'scriptsize', 'footnotesize', 'small', '', def map_font_size(fontsize): """ Map font size in points to Latex font size """ return _FONT_NAMES[bisect(_FONT_SIZES, fontsize)] + + +#------------------------------------------------------------------------ +# +# auxiliaries to facilitate table construction +# +#------------------------------------------------------------------------ + +# patterns for regular expressions, module re: +TBLFMT_PAT = re.compile(r'({\|?)l(\|?})') + +# constants for routing in table construction: +(CELL_BEG, CELL_TEXT, CELL_END, + ROW_BEG, ROW_END, TAB_BEG, TAB_END, + NESTED_MINPG) = range(8) +FIRST_ROW, SUBSEQ_ROW = range(2) + + +def get_charform(col_num): + """ + Transfer column number to column charakter, + limited to letters within a-z; + 26, there is no need for more. + early test of column count in start_table() + """ + if col_num > ord('z') - ord('a'): + raise ValueError, ''.join(( + '\n number of table columns is ', repr(col_num), + '\n should be <= ', repr(ord('z') - ord('a')))) + return chr(ord('a') + col_num) + +def get_numform(col_char): + return ord(col_char) - ord('a') + + +#------------------------------------------ +# 'aa' is sufficient for up to 676 table-rows in each table; +# do you need more? +# uncomment one of the two lines +ROW_COUNT_BASE = 'aa' +# ROW_COUNT_BASE = 'aaa' +#------------------------------------------ +def str_incr(str_counter): + """ for counting table rows """ + lili = list(str_counter) + while 1: + yield ''.join(lili) + if ''.join(lili) == len(lili)*'z': + raise ValueError, ''.join(( + '\n can\'t increment string ', ''.join(lili), + ' of length ', str(len(lili)))) + for i in range(len(lili)-1, -1, -1): + if lili[i] < 'z': + lili[i] = chr(ord(lili[i])+1) + break + else: + lili[i] = 'a' + +#------------------------------------------------------------------------ +# +# Structure of Table-Memory +# +#------------------------------------------------------------------------ + +class Tab_Cell(): + def __init__(self, colchar, span, head): + self.colchar = colchar + self.span = span + self.head = head + self.content = '' + self.nested_minpg = False +class Tab_Row(): + def __init__(self): + self.cells =[] + self.tail = '' + self.addit = '' # for: \\hline, \\cline{} + self.spec_var_cell_width = '' + self.total_width = '' +class Tab_Mem(): + def __init__(self, head): + self.head = head + self.tail ='' + self.rows =[] + #------------------------------------------------------------------------ # # Functions for docbackend @@ -152,8 +322,8 @@ def latexescapeverbatim(text): text = text.replace(' ', '\\ ') text = text.replace('\n', '\\newline\n') #spaces at begin are normally ignored, make sure they are not. - #due to above a space at begin is now \newline\n\ - text = text.replace('\\newline\n\\ ', '\\newline\n\\hspace*{0.1cm}\\ ') + #due to above a space at begin is now \newline\n\ + text = text.replace('\\newline\n\\ ', '\\newline\n\\hspace*{0.1\\grbaseindent}\\ ') return text #------------------------------------------------------------------------ @@ -182,12 +352,12 @@ class LateXBackend(DocBackend): DocBackend.UNDERLINE : ("\\underline{", "}"), DocBackend.SUPERSCRIPT : ("\\textsuperscript{", "}"), } - + ESCAPE_FUNC = lambda x: latexescape - + def setescape(self, preformatted=False): """ - Latex needs two different escape functions depending on the type. + Latex needs two different escape functions depending on the type. This function allows to switch the escape function """ if not preformatted: @@ -201,7 +371,7 @@ class LateXBackend(DocBackend): creates the latex tags needed for non bool style types we support: FONTSIZE : use different \large denomination based on size - : very basic, in mono in the font face + : very basic, in mono in the font face then we use {\ttfamily } """ if type not in self.SUPPORTED_MARKUP: @@ -225,73 +395,16 @@ class LateXBackend(DocBackend): """ Check to make sure filename satisfies the standards for this filetype """ - if self._filename[-4:] != ".tex": + if not self._filename.endswith(".tex"): self._filename = self._filename + ".tex" -#------------------------------------------------------------------------ -# -# Convert from roman to arabic numbers -# -#------------------------------------------------------------------------ -def roman2arabic(strval): - """ - Roman to arabic converter for 0 < num < 4000. - Always returns an integer. - On an invalid input zero is returned. - """ - # Return zero if the type is not str - try: - strval = str(strval).upper() - if not strval: - return 0 - except: - return 0 - - # Return None if there are chars outside of valid roman numerals - if not all(char in 'MDCLXVI' for char in strval): - return 0 - - vals2 = ['CM', 'CD', 'XC', 'XL', 'IX', 'IV'] - nums2 = ( 900, 400, 90, 40, 9, 4) - - vals1 = [ 'M', 'D', 'C', 'L', 'X', 'V', 'I'] - nums1 = (1000, 500, 100, 50, 10, 5, 1) - - ret = 0 - max_num = 1000 - # Start unrolling strval from left to right, - # up to the penultimate char - i = 0 - while i < len(strval): - first_index = vals1.index(strval[i]) - - if i+1 < len(strval) and strval[i:i+2] in vals2: - this_num = nums2[vals2.index(strval[i:i+2])] - if first_index+1 < len(nums1): - new_max_num = nums1[first_index+1] - else: - new_max_num = 0 - i += 2 - else: - this_num = nums1[first_index] - new_max_num = this_num - i += 1 - - # prohibit larger numbers following smaller ones, - # except for the above 2-char combinations - if this_num > max_num: - return 0 - ret += this_num - max_num = new_max_num - - return ret - #------------------------------------------------------------------------ # # Paragraph Handling # #------------------------------------------------------------------------ + class TexFont(object): def __init__(self, style=None): if style: @@ -304,7 +417,8 @@ class TexFont(object): self.font_end = "" self.leftIndent = "" self.firstLineIndent = "" - + + #------------------------------------------------------------------------ # # LaTeXDoc @@ -314,10 +428,256 @@ class TexFont(object): class LaTeXDoc(BaseDoc, TextDoc): """LaTeX document interface class. Derived from BaseDoc""" +# --------------------------------------------------------------------- +# some additional variables +# ------------------------------------------------------------------------- + in_table = False + spec_var_col = 0 + textmem = [] + akt_paragr_style = '' + in_title = True + + +# --------------------------------------------------------------------- +# begin of table special treatment +# ------------------------------------------------------------------------- + def emit(self, text, tab_state=CELL_TEXT, span=1): + """ + Hand over all text but tables to self._backend.write(), (line 1-2). + In case of tables pass to specal treatment below. + """ + if not self.in_table: # all stuff but table + self._backend.write(text) + else: + self.handle_table(text, tab_state, span) + + + def handle_table(self, text, tab_state, span): + """ + Collect tables elements in an adequate cell/row/table structure and + call for LaTeX width calculations and writing out + """ + if tab_state == CELL_BEG: + # here text is head + self.textmem = [] + self.curcol_char = get_charform(self.curcol-1) + if span > 1: # phantom columns prior to multicolumns + for col in range(self.curcol - span, self.curcol - 1): + col_char = get_charform(col) + phantom = Tab_Cell(col_char, 0, '') + self.tabrow.cells.append(phantom) + if not self.tabrow.cells and text.rfind('{|l') != -1: + self.leftmost_vrule = True + if (self.leftmost_vrule and + self.curcol == self.numcols and + text.endswith('l}')): + text = text.replace('l}', 'l|}') + self.tabcell = Tab_Cell(self.curcol_char, span, text) + elif tab_state == CELL_TEXT: + self.textmem.append(text) + elif tab_state == CELL_END: # text == '' + if self.textmem: + if self.textmem[0].find('\\centering') != -1: + self.textmem[0] = self.textmem[0].replace( + '\\centering', '') + self.tabcell.head = re.sub( + TBLFMT_PAT, '\\1c\\2', self.tabcell.head) + if self.textmem[-1].endswith(PAT_FOR_LINE_BREAK): + self.textmem[-1] = self.textmem[-1][:-2] + self.tabcell.content = ''.join(self.textmem) + self.tabrow.cells.append(self.tabcell) + self.textmem = [] + elif tab_state == ROW_BEG: + self.tabrow = Tab_Row() + self.leftmost_vrule = False + elif tab_state == ROW_END: + self.tabrow.tail = ''.join(self.textmem) + self.tabrow.addit = text # text: \\hline, \\cline{} + self.tabmem.rows.append(self.tabrow) + elif tab_state == TAB_BEG: # text: \\begin{longtable}[l]{} + self.tabmem = Tab_Mem(text) + elif tab_state == NESTED_MINPG: + self.tabcell.nested_minpg = True + self.tabcell.content.append(text) + elif tab_state == TAB_END: # text: \\end{longtable} + self.tabmem.tail = text + + # table completed, calc widths and write out + self.calc_latex_widths() + self.write_table() + + + def calc_latex_widths(self): + """ + In tab-cells LaTeX needs fixed width for minipages. + Evaluations are set up here and passed to LaTeX: + Calculate needed/usable widths (lengths), + adjust rows to equal widths (lengths), thus prepared to put something + like hints as '→ ...' in the FamilySheet at rightmost position. + ??? Can all this be done exclusively in TeX? Don't know how. + """ + self._backend.write('\\inittabvars{\\grwidthused}{\\tabcolsep}%\n') + width_used = ['\\tabcolsep'] + + for col_num in range(self.numcols): + col_char = get_charform(col_num) + + if MINIPAGE_COL < 0: + self.spec_var_col = self.numcols + MINIPAGE_COL + else: + self.spec_var_col = MINIPAGE_COL + + # for all columns but spec_var_col: calculate needed col width + if col_num == self.spec_var_col: + continue + self._backend.write(''.join(('\\inittabvars{\\grcolwidth', + col_char, '}{0.0em}%\n'))) + for row in self.tabmem.rows: + cell = row.cells[col_num] + if cell.span: + for part in cell.content.split(PAT_FOR_LINE_BREAK): + self._backend.write(''.join(('\\grcalctextwidth{', + part, '}{\\grcolwidth', col_char, '}%\n'))) + row.cells[col_num].content = cell.content.replace( + PAT_FOR_LINE_BREAK, '\\newline %\n') + self._backend.write(''.join(('\\addtolength{\\grwidthused}{', + '\\grcolwidth', col_char, '+\\tabcolsep}%\n'))) + self._backend.write(''.join(('\\inittabvars{', + '\\grwidthusedtill', col_char, '}{ \\grwidthused}%\n'))) + width_used.append('\\grwidthusedtill' + col_char) + self._backend.write(''.join(('\\inittabvars{\\grwidthavailable}{', + '\\textwidth-\\grwidthused}%\n'))) + + # spec_var_col + self._backend.write('\\inittabvars{\\grmaxrowwidth}{0.0em}%\n') + row_alph_counter = str_incr(ROW_COUNT_BASE) + for row in self.tabmem.rows: + row_alph_id = row_alph_counter.next() + row.spec_var_cell_width = ''.join(('\\grcellwidth', row_alph_id)) + + cell = row.cells[self.spec_var_col] + self._backend.write(''.join(('\\inittabvars{', + row.spec_var_cell_width, '}{0.0em}%\n'))) + + lines = cell.content.split(PAT_FOR_LINE_BREAK) + for part in lines: + self._backend.write(''.join(('\\grcalctextwidth{', part, '}{', + row.spec_var_cell_width, '}%\n'))) + row.cells[self.spec_var_col].content = '\\newline %\n'.join(lines) + + # shorten cells too long, calc row-length, search max row width + self._backend.write('\\inittabvars{\\grspangain}{0.0em}') + if cell.span > 1: + self._backend.write(''.join(('\\inittabvars{\\grspangain}{', + width_used[self.spec_var_col], '-', + width_used[self.spec_var_col - cell.span + 1], '}%\n'))) + self._backend.write(''.join(('\\inittabvars{\\grspecavailable}{', + '\\grwidthavailable+\\grspangain}%\n'))) + self._backend.write(''.join(('\\grminvaltofirst{', + row.spec_var_cell_width, '}{\\grspecavailable}%\n'))) + row.total_width = ''.join(('\\grrowwidth', row_alph_id)) + self._backend.write(''.join(('\\inittabvars{', row.total_width, + '}{\\grwidthused +', row.spec_var_cell_width, + '-\\grspangain}%\n'))) + self._backend.write(''.join(('\\grmaxvaltofirst{\\grmaxrowwidth}{', + row.total_width, '}%\n'))) + + # widen spec_var cell: + # (special feature; allows text to be placed at the right border. + # for later use, doesn't matter here) + for row in self.tabmem.rows: + self._backend.write(''.join(('\\grmaxvaltofirst{', + row.spec_var_cell_width, '}{', row.spec_var_cell_width, + '+\\grmaxrowwidth-\\grspangain-', row.total_width, '}%\n'))) + + + def write_table(self): + # open table with '\\begin{longtable}': + self._backend.write(''.join(self.tabmem.head)) + + # special treatment at begin of longtable for heading and + # closing at top and bottom of table + # and parts of it at pagebreak separating + (separate, + complete_row) = self.mk_first_row(self.tabmem.rows[FIRST_ROW]) + self._backend.write(separate) + self._backend.write('\\endhead%\n') + self._backend.write(separate.replace('raisebox{+1ex}', + 'raisebox{-2ex}')) + self._backend.write('\\endfoot%\n') + if self.head_line: + self._backend.write('\\hline%\n') + self.head_line= False + else: + self._backend.write('%\n') + self._backend.write(complete_row) + self._backend.write('\\endfirsthead%\n') + self._backend.write('\\endlastfoot%\n') + + # now hand over subsequent rows + for row in self.tabmem.rows[SUBSEQ_ROW:]: + complete_row = self.mk_subseq_rows(row) + self._backend.write(complete_row) + + # close table with '\\end{longtable}': + self._backend.write(''.join(self.tabmem.tail)) + + + def mk_first_row(self, first_row): + complete =[] + separate =[] + add_vdots = '' + for cell in first_row.cells: + if cell.span == 0: # phantom columns prior to multicolumns + continue + leading = '{' + closing = '} & %\n' + if get_numform(cell.colchar) == self.spec_var_col: + leading = ''.join(('{\\tabheadstrutceil\\begin{minipage}[t]{', + first_row.spec_var_cell_width, '}{')) + closing = '\\tabheadstrutfloor}\\end{minipage}} & %\n' + if (not separate and + get_numform(cell.colchar) == self.numcols - 1): + add_vdots = ''.join(('\\hspace*{\\fill}\\hspace*{\\fill}', + '\\raisebox{+1ex}{\\vdots}')) + complete.append(''.join((cell.head, leading, + cell.content, closing))) + separate.append(''.join((cell.head, leading, + '\\hspace*{\\fill}\\raisebox{+1ex}{\\vdots}', + add_vdots, '\\hspace*{\\fill}', closing))) + return (''.join((''.join(separate)[:-4], '%\n', first_row.tail)), + ''.join((''.join(complete)[:-4], '%\n', first_row.tail, + first_row.addit))) + + + def mk_subseq_rows(self, row): + complete =[] + for cell in row.cells: + if cell.span == 0: # phantom columns prior to multicolumns + continue + leading = '{' + closing = '} & %\n' + if get_numform(cell.colchar) == self.spec_var_col: # last col + if cell.nested_minpg: + cell.content.replace('\\begin{minipage}{\\grminpgwidth}', + ''.join(('\\begin{minipage}{0.8', + row.spec_var_cell_width, '}'))) + leading = ''.join(('{\\tabrowstrutceil\\begin{minipage}[t]{', + row.spec_var_cell_width, '}{')) + closing = '\\tabrowstrutfloor}\\end{minipage}} & %\n' + complete.append(''.join((cell.head, leading, + cell.content, closing))) + return ''.join((''.join(complete)[:-4], '%\n', row.tail, row.addit)) + +# --------------------------------------------------------------------- +# end of special table treatment +# --------------------------------------------------------------------- + + def page_break(self): "Forces a page break, creating a new page" - self._backend.write('\\newpage ') - + self.emit('\\newpage%\n') + def open(self, filename): """Opens the specified file, making sure that it has the extension of .tex""" @@ -326,13 +686,13 @@ class LaTeXDoc(BaseDoc, TextDoc): # Font size control seems to be limited. For now, ignore # any style constraints, and use 12pt has the default - + options = "12pt" if self.paper.get_orientation() == PAPER_LANDSCAPE: options = options + ",landscape" - # Paper selections are somewhat limited on a stock installation. + # Paper selections are somewhat limited on a stock installation. # If the user picks something not listed here, we'll just accept # the default of the user's LaTeX installation (usually letter). paper_name = self.paper.get_size().get_name().lower() @@ -341,56 +701,58 @@ class LaTeXDoc(BaseDoc, TextDoc): # Use the article template, T1 font encodings, and specify # that we should use Latin1 and unicode character encodings. - self._backend.write(_LATEX_TEMPLATE_1 % options) - self._backend.write(_LATEX_TEMPLATE) - - self.in_list = 0 - self.in_table = 0 + self.emit(_LATEX_TEMPLATE_1 % options) + self.emit(_LATEX_TEMPLATE) + + self.in_list = False + self.in_table = False + self.head_line = False self.imagenum = 0 - + #Establish some local styles for the report self.latexstyle = {} self.latex_font = {} - + style_sheet = self.get_style_sheet() for style_name in style_sheet.get_paragraph_style_names(): style = style_sheet.get_paragraph_style(style_name) font = style.get_font() size = font.get_size() - + self.latex_font[style_name] = TexFont() thisstyle = self.latex_font[style_name] - + thisstyle.font_beg = "" thisstyle.font_end = "" # Is there special alignment? (default is left) align = style.get_alignment_text() if align == "center": - thisstyle.font_beg += "\\centerline{" - thisstyle.font_end = "}" + thisstyle.font_end + thisstyle.font_beg += "{\\centering" + thisstyle.font_end = ''.join(("\n\n}", + thisstyle.font_end)) elif align == "right": thisstyle.font_beg += "\\hfill" - + # Establish font face and shape if font.get_type_face() == FONT_SANS_SERIF: thisstyle.font_beg += "\\sffamily" - thisstyle.font_end = "\\rmfamily" + thisstyle.font_end + thisstyle.font_end = "\\rmfamily" + thisstyle.font_end if font.get_bold(): thisstyle.font_beg += "\\bfseries" thisstyle.font_end = "\\mdseries" + thisstyle.font_end if font.get_italic() or font.get_underline(): thisstyle.font_beg += "\\itshape" thisstyle.font_end = "\\upshape" + thisstyle.font_end - - # Now determine font size + + # Now determine font size fontsize = map_font_size(size) if fontsize: thisstyle.font_beg += "\\" + fontsize thisstyle.font_end += "\\normalsize" - + thisstyle.font_beg += " " thisstyle.font_end += " " - + left = style.get_left_margin() first = style.get_first_indent() + left thisstyle.leftIndent = left @@ -400,98 +762,108 @@ class LaTeXDoc(BaseDoc, TextDoc): def close(self): """Clean up and close the document""" if self.in_list: - self._backend.write('\\end{enumerate}\n') - self._backend.write('\n\\end{document}\n') + self.emit('\\end{list}\n') + self.emit('\\end{document}\n') self._backend.close() def end_page(self): """Issue a new page command""" - self._backend.write('\\newpage') + self.emit('\\newpage') - def start_paragraph(self,style_name,leader=None): - """Paragraphs handling - A Gramps paragraph is any + def start_paragraph(self, style_name, leader=None): + """Paragraphs handling - A Gramps paragraph is any single body of text from a single word to several sentences. We assume a linebreak at the end of each paragraph.""" + self.akt_paragr_style= style_name style_sheet = self.get_style_sheet() - + style = style_sheet.get_paragraph_style(style_name) ltxstyle = self.latexstyle[style_name] self.level = style.get_header_level() - - self.fbeg = ltxstyle.font_beg + + self.fbeg = ltxstyle.font_beg self.fend = ltxstyle.font_end + self.indent = ltxstyle.leftIndent self.FLindent = ltxstyle.firstLineIndent - #firstLineIndent is not used, subtract from indent. - self.indent -= self.FLindent - + if self.indent == 0: + self.indent = self.FLindent + + # For additional vertical space beneath title line(s) + # i.e. when the first centering ended: + if self.in_title and ltxstyle.font_beg.find('centering') == -1: + self.in_title = False + self._backend.write('\\vspace{5ex}%\n') + + self._backend.write('\\inittabvars{\\grleadinglabelwidth}{0.0em}%\n') + if leader: + self._backend.write(''.join(( + '\\grcalctextwidth{', leader, '}{\\grleadinglabelwidth}%\n'))) + self._backend.write( + '\\inittabvars{\\grlistbacksp}{\\grleadinglabelwidth +1em}%\n') + else: + self._backend.write( + '\\inittabvars{\\grlistbacksp}{0em}%\n') + +# ------------------------------------------------------------------- + # Gramps presumes 'cm' as units; here '\\grbaseindent' is used + # as equivalent, set in '_LATEX_TEMPLATE' above to '3em'; + # there another value might be choosen. +# ------------------------------------------------------------------- if self.indent is not None and not self.in_table: - myspace = '%scm' % str(self.indent) - self._backend.write('\\grampsindent{%s}\n' % myspace) - self.fix_indent = 1 - + self.emit(''.join(('\\inittabvars{' + '\\grminpgindent}{%s\\grbaseindent-\\grlistbacksp}' % + repr(self.indent), '%\n\\hspace*{\\grminpgindent}%\n', + '\\begin{minipage}[t]{\\textwidth-\\grminpgindent}', + '%\n'))) + self.fix_indent = True + if leader is not None and not self.in_list: - self._backend.write('\\begin{enumerate}\n') - self.in_list = 1 - if leader is not None: - # try obtaining integer - leader_1 = leader[:-1] - num = roman2arabic(leader_1) - if num == 0: - # Not roman, try arabic or fallback to 1 - try: - num = int(leader_1) - except ValueError: - num = 1 - self._backend.write(' \\renewcommand\\theenumi{\\arabic{enumi}}') - else: - # roman, set the case correctly - self._backend.write(' \\renewcommand\\theenumi{\\%soman{enumi}}' - % ('r' if leader_1.islower() else 'R')) - - self._backend.write(' \\setcounter{enumi}{%d} ' % num) - self._backend.write(' \\addtocounter{enumi}{-1}\n') - self._backend.write(' \\item ') + self.in_list = True + self._backend.write(''.join(('\\begin{list}{%\n', leader, + '}{%\n', '\\labelsep0.5em %\n', + '\\setlength{\\labelwidth}{\\grleadinglabelwidth}%\n', + '\\setlength{\\leftmargin}{\\grlistbacksp}}%\n', + '\\item%\n'))) + if leader is None and not self.in_list and not self.in_table: - self._backend.write('\n') - - self._backend.write('%s ' % self.fbeg) - + self.emit('\n') + self.emit('%s ' % self.fbeg) + def end_paragraph(self): """End the current paragraph""" - newline = '\ \\newline\n' - + newline = '%\n\n' if self.in_list: - self.in_list = 0 - self._backend.write('\n\\end{enumerate}\n') + self.in_list = False + self.emit('\n\\end{list}\n') newline = '' - elif self.in_table: - newline = ('') - - self._backend.write('%s%s' % (self.fend, newline)) - if self.fix_indent == 1: - self.fix_indent = 0 - self._backend.write('\\grampsindent{0cm}\n') + newline = (PAT_FOR_LINE_BREAK) + + self.emit('%s%s' % (self.fend, newline)) + if self.fix_indent: + self.emit( + '\\end{minipage}\\parindent0em%\n\n') + self.fix_indent = False def start_bold(self): """Bold face""" - self._backend.write('\\textbf{') + self.emit('\\textbf{') def end_bold(self): """End bold face""" - self._backend.write('}') - + self.emit('}') + def start_superscript(self): - self._backend.write('\\textsuperscript{') + self.emit('\\textsuperscript{') def end_superscript(self): - self._backend.write('}') + self.emit('}') def start_table(self, name,style_name): """Begin new table""" - self.in_table = 1 + self.in_table = True self.currow = 0 # We need to know a priori how many columns are in this table @@ -499,75 +871,93 @@ class LaTeXDoc(BaseDoc, TextDoc): self.tblstyle = styles.get_table_style(style_name) self.numcols = self.tblstyle.get_columns() + # early test of column count: + z = get_charform(self.numcols-1) + tblfmt = '*{%d}{l}' % self.numcols - self._backend.write('\n\n\\begin{longtable}[l]{%s}\n' % tblfmt) + self.emit( + '\\begin{longtable}[l]{%s}\n' % (tblfmt), TAB_BEG) def end_table(self): """Close the table environment""" - self.in_table = 0 # Create a paragraph separation below the table. - self._backend.write('\\end{longtable}\n\\par\n') + self.emit( + '%\n\\end{longtable}%\n\\par%\n', TAB_END) + self.in_table = False def start_row(self): """Begin a new row""" + self.emit('', ROW_BEG) # doline/skipfirst are flags for adding hor. rules - self.doline = 0 - self.skipfirst = 0 + self.doline = False + self.skipfirst = False self.curcol = 0 self.currow = self.currow + 1 - + def end_row(self): """End the row (new line)""" - self._backend.write('\\\\ ') - if self.doline == 1: - if self.skipfirst == 1: - self._backend.write('\\cline{2-%d}\n' % self.numcols) + self.emit('\\\\ ') + if self.doline: + if self.skipfirst: + self.emit(''.join((('\\cline{2-%d}' % + self.numcols), '%\n')), ROW_END) else: - self._backend.write('\\hline \\\\ \n') + self.emit('\\hline %\n', ROW_END) else: - self._backend.write('\n') - + self.emit('%\n', ROW_END) + self.emit('%\n') + def start_cell(self,style_name,span=1): """Add an entry to the table. - We always place our data inside braces + We always place our data inside braces for safety of formatting.""" self.colspan = span self.curcol = self.curcol + self.colspan styles = self.get_style_sheet() self.cstyle = styles.get_cell_style(style_name) - self.lborder = self.cstyle.get_left_border() - self.rborder = self.cstyle.get_right_border() - self.bborder = self.cstyle.get_bottom_border() - self.tborder = self.cstyle.get_top_border() - self.llist = self.cstyle.get_longlist() - if self.llist == 1: - cellfmt = "p{\linewidth-3cm}" - else: - cellfmt = "l" - +# ------------------------------------------------------------------ +# begin special modification for boolean values + # values imported here are used for test '==1' and '!=0'. To get + # local boolean values the tests are now transfered to the import lines +# ------------------------------------------------------------------ + self.lborder = 1 == self.cstyle.get_left_border() + self.rborder = 1 == self.cstyle.get_right_border() + self.bborder = 1 == self.cstyle.get_bottom_border() + self.tborder = 0 != self.cstyle.get_top_border() + + # self.llist not needed, LaTeX has to decide on its own + # wether a line fits or not. See comment in calc_latex_widths() above. + # self.llist = 1 == self.cstyle.get_longlist() + + cellfmt = "l" # Account for vertical rules - if self.lborder == 1: + if self.lborder: cellfmt = '|' + cellfmt - if self.rborder == 1: + if self.rborder: cellfmt = cellfmt + '|' # and Horizontal rules - if self.bborder == 1: - self.doline = 1 - elif self.curcol == 1: - self.skipfirst = 1 + if self.bborder: + self.doline = True + elif self.curcol == 1: + self.skipfirst = True + if self.tborder: + self.head_line = True +# ------------------------------------------------------------------ +# end special modification for boolean values +# ------------------------------------------------------------------ + + self.emit( + ''.join(('%\n', '\\multicolumn{%d}{%s}' % (span, cellfmt))), + CELL_BEG, span) + - if self.tborder != 0: - self._backend.write('\\hline\n') - self._backend.write ('\\multicolumn{%d}{%s}{' % (span,cellfmt)) - def end_cell(self): """Prepares for next cell""" - self._backend.write('} ') - if self.curcol < self.numcols: - self._backend.write('& ') + self.emit('', CELL_END) + def add_media_object(self, name, pos, x, y, alt=''): """Add photo to report""" @@ -581,36 +971,43 @@ class LaTeXDoc(BaseDoc, TextDoc): self.imagenum = self.imagenum + 1 picf = self.filename[:-4] + '_img' + str(self.imagenum) + '.eps' pic.eps_convert(picf) - - # x and y will be maximum width OR height in units of cm - mysize = 'width=%dcm, height=%dcm,keepaspectratio' % (x,y) - if pos == "right": - self._backend.write('\\hfill\\includegraphics[%s]{%s}\n' % (mysize,picf)) - elif pos == "left": - self._backend.write('\\includegraphics[%s]{%s}\\hfill\n' % (mysize,picf)) - else: - self._backend.write('\\centerline{\\includegraphics[%s]{%s}}\n' % (mysize,picf)) - def write_text(self,text,mark=None): +# ------------------------------------------------------------------- + # x and y will be maximum width OR height in units of cm + # here '\\grbaseindent' is used as equivalent, see above +# ------------------------------------------------------------------- + mysize = ''.join(('width=%d\\grbaseindent, ', + 'height=%d\\grbaseindent,keepaspectratio' % (x,y))) + if pos == "right": + self.emit(( + '\\hfill\\includegraphics[%s]{%s}\n' % (mysize,picf))) + elif pos == "left": + self.emit(( + '\\includegraphics[%s]{%s}\\hfill\n' % (mysize,picf))) + else: + self.emit(( + '\\centering{\\includegraphics[%s]{%s}}\n' % (mysize,picf))) + + def write_text(self, text, mark=None): """Write the text to the file""" if text == '\n': - text = '\\newline\n' + text = '' text = latexescape(text) #hard coded replace of the underline used for missing names/data - text = text.replace('\\_'*13, '\\underline{\hspace{3cm}}') - self._backend.write(text) + text = text.replace('\\_'*13, '\\underline{\hspace{3\\grbaseindent}}') + self.emit(text + ' ') def write_styled_note(self, styledtext, format, style_name, contains_html=False): """ - Convenience function to write a styledtext to the latex doc. + Convenience function to write a styledtext to the latex doc. styledtext : assumed a StyledText object to write format : = 0 : Flowed, = 1 : Preformatted style_name : name of the style to use for default presentation - contains_html: bool, the backend should not check if html is present. - If contains_html=True, then the textdoc is free to handle that in + contains_html: bool, the backend should not check if html is present. + If contains_html=True, then the textdoc is free to handle that in some way. Eg, a textdoc could remove all tags, or could make sure - a link is clickable. LatexDoc ignores notes that contain html + a link is clickable. self ignores notes that contain html """ if contains_html: return @@ -620,37 +1017,42 @@ class LaTeXDoc(BaseDoc, TextDoc): if format: #preformatted, use different escape function self._backend.setescape(True) - + markuptext = self._backend.add_markup_from_styled(text, s_tags) - + #there is a problem if we write out a note in a table. No newline is # possible, the note runs over the margin into infinity. # A good solution for this ??? # A quick solution: create a minipage for the note and add that always # hoping that the user will have left sufficient room for the page - self._backend.write("\\begin{minipage}{{0.8\\linewidth}}\n") + # + # now solved by postprocessing in emit() + # by explicitely calculating column widths + # if format: self.start_paragraph(style_name) - self._backend.write(markuptext) + self.emit(markuptext) self.end_paragraph() #preformatted finished, go back to normal escape function self._backend.setescape(False) else: - for line in markuptext.split('\n\n'): + for line in markuptext.split('%\n%\n'): self.start_paragraph(style_name) for realline in line.split('\n'): - self._backend.write(realline) - self._backend.write("\\newline\n") + self.emit(realline) + self.emit("\\newline%\n") self.end_paragraph() - self._backend.write("\n\\vspace*{0.5cm} \n\\end{minipage}\n\n") def write_endnotes_ref(self, text, style_name): """ Overwrite base method for lines of endnotes references """ - self._backend.write("\\begin{minipage}{{0.8\\linewidth}}\n") + self.emit("\\begin{minipage}{\\grminpgwidth}\n", + NESTED_MINPG) for line in text.split('\n'): self.start_paragraph(style_name) self.write_text(line) self.end_paragraph() - self._backend.write("\n\\vspace*{0.5cm} \n\end{minipage}\n\n") + self.emit( + "%\n\\vspace*{0.5\\grbaseindent}%\n\\end{minipage}%\n\n") +