# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# No modifications of this Makefile should be necessary.
#
# To use this template:
#     1) Define: figdir, docname, lang, omffile, and entities in
#        your Makefile.am file for each document directory,
#        although figdir, omffile, and entities may be empty
#     2) Make sure the Makefile in (1) also includes 
#	 "include $(top_srcdir)/doc/xmldocs.make" and
#	 "dist-hook: app-dist-hook".
#     3) Optionally define 'entities' to hold xml entities which
#        you would also like installed
#     4) Figures must go under $(figdir)/ and be in PNG format
#     5) You should only have one document per directory 
#     6) Note that the figure directory, $(figdir)/, should not have its
#        own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
#   figdir = figures
#   docname = scrollkeeper-manual
#   lang = C
#   omffile=scrollkeeper-manual-C.omf
#   entities = fdl.xml
#   include $(top_srcdir)/help/xmldocs.make
#   dist-hook: app-dist-hook
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper 
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/
#	Version: 0.1.2 (last updated: March 20, 2002)
#

# 
# No modifications of this Makefile should be necessary.
#
# This file contains the build instructions for installing OMF files.  It is
# generally called from the makefiles for particular formats of documentation.
#
# Note that you must configure your package with --localstatedir=/var/lib
# so that the scrollkeeper-update command below will update the database
# in the standard scrollkeeper directory.
#
# If it is impossible to configure with --localstatedir=/var/lib, then
# modify the definition of scrollkeeper_localstate_dir so that
# it points to the correct location. Note that you must still use 
# $(localstatedir) in this or when people build RPMs it will update
# the real database on their system instead of the one under RPM_BUILD_ROOT.
#
# Note: This make file is not incorporated into xmldocs.make because, in
#       general, there will be other documents install besides XML documents
#       and the makefiles for these formats should also include this file.
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/	
# 	Version: 0.1.2 (last updated: March 20, 2002)
#
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../../..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AWK = @AWK@
BINSH = @BINSH@
CC = @CC@
DEPDIR = @DEPDIR@
GNOMEHELP = @GNOMEHELP@
GNOMEINC = @GNOMEINC@
GNOMELIB = @GNOMELIB@
GPREFIX = @GPREFIX@
HAVE_PKG_CONFIG = @HAVE_PKG_CONFIG@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LANGUAGES = @LANGUAGES@
MOFILES = @MOFILES@
MSGFMT = @MSGFMT@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
PYTHON = @PYTHON@
PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RELEASE = @RELEASE@
SCROLLKEEPER_BUILD_REQUIRED = @SCROLLKEEPER_BUILD_REQUIRED@
SK_CONFIG = @SK_CONFIG@
STRIP = @STRIP@
SWIG = @SWIG@
VERSION = @VERSION@
VERSIONSTRING = @VERSIONSTRING@
ZIP = @ZIP@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
figdir = figures
docname = gramps-manual
lang = C
omffile = gramps-manual-C.omf
entities = legal.xml 

# ************* Begin of section some packagers may need to modify  **************
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
docdir = $(datadir)/@PACKAGE@/gnome/help/@PACKAGE@/$(lang)

# **************  You should not have to edit below this line  *******************
xml_files = $(entities) $(docname).xml
omf_dir = $(top_srcdir)/omf-install

EXTRA_DIST = $(xml_files) $(omffile)

CLEANFILES = omf_timestamp *.out

omf_dest_dir = $(datadir)/omf/@PACKAGE@
scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
subdir = doc/gramps-manual/C
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_SOURCES =
DIST_COMMON = Makefile.am Makefile.in
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/doc/xmldocs.make $(top_srcdir)/doc/omf.make $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/gramps-manual/C/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
uninstall-info-am:
tags: TAGS
TAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ../../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@list='$(DISTFILES)'; for file in $$list; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="${top_distdir}" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile

installdirs:

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-data-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

uninstall-am: uninstall-info-am uninstall-local

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am info info-am install \
	install-am install-data install-data-am install-data-local \
	install-exec install-exec-am install-info install-info-am \
	install-man install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic uninstall uninstall-am \
	uninstall-info-am uninstall-local


omf: omf_timestamp

omf_timestamp: $(omffile)
	-for file in $(omffile); do \
	  scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \
	done
	touch omf_timestamp

install-data-hook-omf:
	$(mkinstalldirs) $(DESTDIR)$(omf_dest_dir)
	for file in $(omffile); do \
		$(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \
	done
	-scrollkeeper-update -p $(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir)

uninstall-local-omf:
	-for file in $(srcdir)/*.omf; do \
		basefile=`basename $$file`; \
		rm -f $(omf_dest_dir)/$$basefile; \
	done
	-rmdir $(omf_dest_dir)
	-scrollkeeper-update -p $(scrollkeeper_localstate_dir)

all: omf

$(docname).xml: $(entities)
	-ourdir=`pwd`;  \
	cd $(srcdir);   \
	cp $(entities) $$ourdir

app-dist-hook:
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(distdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-local: omf
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	for file in $(xml_files); do \
	  cp $(srcdir)/$$file $(DESTDIR)$(docdir); \
	done
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-hook: install-data-hook-omf

uninstall-local: uninstall-local-doc uninstall-local-omf

uninstall-local-doc:
	-if test "$(figdir)"; then \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    rm -f $(DESTDIR)/$(docdir)/$(figdir)/$$basefile; \
	  done; \
	  rmdir $(DESTDIR)$(docdir)/$(figdir); \
	fi
	-for file in $(xml_files); do \
	  rm -f $(DESTDIR)$(docdir)/$$file; \
	done
	-rmdir $(DESTDIR)$(docdir)
dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: