config: deindent all help texts

Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Config.in

@@ -15,314 +15,314 @@ config DESKTOP
 	bool "Enable compatibility for full-blown desktop systems"
 	default y
 	help
-	  Enable applet options and features which are not essential.
+	Enable applet options and features which are not essential.
-	  Many applet options have dedicated config options to (de)select them
+	Many applet options have dedicated config options to (de)select them
-	  under that applet; this options enables those options which have no
+	under that applet; this options enables those options which have no
-	  individual config item for them.
+	individual config item for them.
 
-	  Select this if you plan to use busybox on full-blown desktop machine
+	Select this if you plan to use busybox on full-blown desktop machine
-	  with common Linux distro, which needs higher level of command-line
+	with common Linux distro, which needs higher level of command-line
-	  compatibility.
+	compatibility.
 
-	  If you are preparing your build to be used on an embedded box
+	If you are preparing your build to be used on an embedded box
-	  where you have tighter control over the entire set of userspace
+	where you have tighter control over the entire set of userspace
-	  tools, you can unselect this option for smaller code size.
+	tools, you can unselect this option for smaller code size.
 
 config EXTRA_COMPAT
 	bool "Provide compatible behavior for rare corner cases (bigger code)"
 	default n
 	help
-	  This option makes grep, sed etc handle rare corner cases
+	This option makes grep, sed etc handle rare corner cases
-	  (embedded NUL bytes and such). This makes code bigger and uses
+	(embedded NUL bytes and such). This makes code bigger and uses
-	  some GNU extensions in libc. You probably only need this option
+	some GNU extensions in libc. You probably only need this option
-	  if you plan to run busybox on desktop.
+	if you plan to run busybox on desktop.
 
 config INCLUDE_SUSv2
 	bool "Enable obsolete features removed before SUSv3"
 	default y
 	help
-	  This option will enable backwards compatibility with SuSv2,
+	This option will enable backwards compatibility with SuSv2,
-	  specifically, old-style numeric options ('command -1 <file>')
+	specifically, old-style numeric options ('command -1 <file>')
-	  will be supported in head, tail, and fold. (Note: should
+	will be supported in head, tail, and fold. (Note: should
-	  affect renice too.)
+	affect renice too.)
 
 config LONG_OPTS
 	bool "Support --long-options"
 	default y
 	help
-	  Enable this if you want busybox applets to use the gnu --long-option
+	Enable this if you want busybox applets to use the gnu --long-option
-	  style, in addition to single character -a -b -c style options.
+	style, in addition to single character -a -b -c style options.
 
 config SHOW_USAGE
 	bool "Show applet usage messages"
 	default y
 	help
-	  Enabling this option, BusyBox applets will show terse help messages
+	Enabling this option, BusyBox applets will show terse help messages
-	  when invoked with wrong arguments.
+	when invoked with wrong arguments.
-	  If you do not want to show any (helpful) usage message when
+	If you do not want to show any (helpful) usage message when
-	  issuing wrong command syntax, you can say 'N' here,
+	issuing wrong command syntax, you can say 'N' here,
-	  saving approximately 7k.
+	saving approximately 7k.
 
 config FEATURE_VERBOSE_USAGE
 	bool "Show verbose applet usage messages"
 	default y
 	depends on SHOW_USAGE
 	help
-	  All BusyBox applets will show verbose help messages when
+	All BusyBox applets will show verbose help messages when
-	  busybox is invoked with --help. This will add a lot of text to the
+	busybox is invoked with --help. This will add a lot of text to the
-	  busybox binary. In the default configuration, this will add about
+	busybox binary. In the default configuration, this will add about
-	  13k, but it can add much more depending on your configuration.
+	13k, but it can add much more depending on your configuration.
 
 config FEATURE_COMPRESS_USAGE
 	bool "Store applet usage messages in compressed form"
 	default y
 	depends on SHOW_USAGE
 	help
-	  Store usage messages in .bz compressed form, uncompress them
+	Store usage messages in .bz compressed form, uncompress them
-	  on-the-fly when <applet> --help is called.
+	on-the-fly when <applet> --help is called.
 
-	  If you have a really tiny busybox with few applets enabled (and
+	If you have a really tiny busybox with few applets enabled (and
-	  bunzip2 isn't one of them), the overhead of the decompressor might
+	bunzip2 isn't one of them), the overhead of the decompressor might
-	  be noticeable. Also, if you run executables directly from ROM
+	be noticeable. Also, if you run executables directly from ROM
-	  and have very little memory, this might not be a win. Otherwise,
+	and have very little memory, this might not be a win. Otherwise,
-	  you probably want this.
+	you probably want this.
 
 config LFS
 	bool "Support files > 2 GB"
 	default y
 	help
-	  If you want to build BusyBox with large file support, then enable
+	If you want to build BusyBox with large file support, then enable
-	  this option. This will have no effect if your kernel or your C
+	this option. This will have no effect if your kernel or your C
-	  library lacks large file support for large files. Some of the
+	library lacks large file support for large files. Some of the
-	  programs that can benefit from large file support include dd, gzip,
+	programs that can benefit from large file support include dd, gzip,
-	  cp, mount, tar, and many others. If you want to access files larger
+	cp, mount, tar, and many others. If you want to access files larger
-	  than 2 Gigabytes, enable this option.
+	than 2 Gigabytes, enable this option.
 
 config PAM
 	bool "Support PAM (Pluggable Authentication Modules)"
 	default n
 	help
-	  Use PAM in some busybox applets (currently login and httpd) instead
+	Use PAM in some busybox applets (currently login and httpd) instead
-	  of direct access to password database.
+	of direct access to password database.
 
 config FEATURE_DEVPTS
 	bool "Use the devpts filesystem for Unix98 PTYs"
 	default y
 	help
-	  Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+	Enable if you want BusyBox to use Unix98 PTY support. If enabled,
-	  busybox will use /dev/ptmx for the master side of the pseudoterminal
+	busybox will use /dev/ptmx for the master side of the pseudoterminal
-	  and /dev/pts/<number> for the slave side. Otherwise, BSD style
+	and /dev/pts/<number> for the slave side. Otherwise, BSD style
-	  /dev/ttyp<number> will be used. To use this option, you should have
+	/dev/ttyp<number> will be used. To use this option, you should have
-	  devpts mounted.
+	devpts mounted.
 
 config FEATURE_UTMP
 	bool "Support utmp file"
 	default y
 	help
-	  The file /var/run/utmp is used to track who is currently logged in.
+	The file /var/run/utmp is used to track who is currently logged in.
-	  With this option on, certain applets (getty, login, telnetd etc)
+	With this option on, certain applets (getty, login, telnetd etc)
-	  will create and delete entries there.
+	will create and delete entries there.
-	  "who" applet requires this option.
+	"who" applet requires this option.
 
 config FEATURE_WTMP
 	bool "Support wtmp file"
 	default y
 	depends on FEATURE_UTMP
 	help
-	  The file /var/run/wtmp is used to track when users have logged into
+	The file /var/run/wtmp is used to track when users have logged into
-	  and logged out of the system.
+	and logged out of the system.
-	  With this option on, certain applets (getty, login, telnetd etc)
+	With this option on, certain applets (getty, login, telnetd etc)
-	  will append new entries there.
+	will append new entries there.
-	  "last" applet requires this option.
+	"last" applet requires this option.
 
 config FEATURE_PIDFILE
 	bool "Support writing pidfiles"
 	default y
 	help
-	  This option makes some applets (e.g. crond, syslogd, inetd) write
+	This option makes some applets (e.g. crond, syslogd, inetd) write
-	  a pidfile at the configured PID_FILE_PATH.  It has no effect
+	a pidfile at the configured PID_FILE_PATH.  It has no effect
-	  on applets which require pidfiles to run.
+	on applets which require pidfiles to run.
 
 config PID_FILE_PATH
 	string "Directory for pidfiles"
 	default "/var/run"
 	depends on FEATURE_PIDFILE
 	help
-	  This is the default path where pidfiles are created.  Applets which
+	This is the default path where pidfiles are created.  Applets which
-	  allow you to set the pidfile path on the command line will override
+	allow you to set the pidfile path on the command line will override
-	  this value.  The option has no effect on applets that require you to
+	this value.  The option has no effect on applets that require you to
-	  specify a pidfile path.
+	specify a pidfile path.
 
 config BUSYBOX
 	bool "Include busybox applet"
 	default y
 	help
-	  The busybox applet provides general help regarding busybox and
+	The busybox applet provides general help regarding busybox and
-	  allows the included applets to be listed.  It's also required
+	allows the included applets to be listed.  It's also required
-	  if applet links are to be installed at runtime. If you unselect
+	if applet links are to be installed at runtime. If you unselect
-	  this option, running busybox without any arguments will give
+	this option, running busybox without any arguments will give
-	  just a cryptic error message:
+	just a cryptic error message:
 
-	  $ busybox
+	$ busybox
-	  busybox: applet not found
+	busybox: applet not found
 
-	  Running "busybox APPLET [ARGS...]" will still work, of course.
+	Running "busybox APPLET [ARGS...]" will still work, of course.
 
 config FEATURE_INSTALLER
 	bool "Support --install [-s] to install applet links at runtime"
 	default y
 	depends on BUSYBOX
 	help
-	  Enable 'busybox --install [-s]' support. This will allow you to use
+	Enable 'busybox --install [-s]' support. This will allow you to use
-	  busybox at runtime to create hard links or symlinks for all the
+	busybox at runtime to create hard links or symlinks for all the
-	  applets that are compiled into busybox.
+	applets that are compiled into busybox.
 
 config INSTALL_NO_USR
 	bool "Don't use /usr"
 	default n
 	help
-	  Disable use of /usr. busybox --install and "make install"
+	Disable use of /usr. busybox --install and "make install"
-	  will install applets only to /bin and /sbin,
+	will install applets only to /bin and /sbin,
-	  never to /usr/bin or /usr/sbin.
+	never to /usr/bin or /usr/sbin.
 
 config FEATURE_SUID
 	bool "Drop SUID state for most applets"
 	default y
 	help
-	  With this option you can install the busybox binary belonging
+	With this option you can install the busybox binary belonging
-	  to root with the suid bit set, enabling some applets to perform
+	to root with the suid bit set, enabling some applets to perform
-	  root-level operations even when run by ordinary users
+	root-level operations even when run by ordinary users
-	  (for example, mounting of user mounts in fstab needs this).
+	(for example, mounting of user mounts in fstab needs this).
 
-	  With this option enabled, Busybox drops privileges for applets
+	With this option enabled, Busybox drops privileges for applets
-	  that don't need root access, before entering their main() function.
+	that don't need root access, before entering their main() function.
 
-	  If you are really paranoid and don't want even initial busybox code
+	If you are really paranoid and don't want even initial busybox code
-	  to run under root for evey applet, build two busybox binaries with
+	to run under root for evey applet, build two busybox binaries with
-	  different applets in them (and the appropriate symlinks pointing
+	different applets in them (and the appropriate symlinks pointing
-	  to each binary), and only set the suid bit on the one that needs it.
+	to each binary), and only set the suid bit on the one that needs it.
 
-	  Some applets which require root rights (need suid bit on the binary
+	Some applets which require root rights (need suid bit on the binary
-	  or to be run by root) and will refuse to execute otherwise:
+	or to be run by root) and will refuse to execute otherwise:
-	  crontab, login, passwd, su, vlock, wall.
+	crontab, login, passwd, su, vlock, wall.
 
-	  The applets which will use root rights if they have them
+	The applets which will use root rights if they have them
-	  (via suid bit, or because run by root), but would try to work
+	(via suid bit, or because run by root), but would try to work
-	  without root right nevertheless:
+	without root right nevertheless:
-	  findfs, ping[6], traceroute[6], mount.
+	findfs, ping[6], traceroute[6], mount.
 
-	  Note that if you DO NOT select this option, but DO make busybox
+	Note that if you DO NOT select this option, but DO make busybox
-	  suid root, ALL applets will run under root, which is a huge
+	suid root, ALL applets will run under root, which is a huge
-	  security hole (think "cp /some/file /etc/passwd").
+	security hole (think "cp /some/file /etc/passwd").
 
 config FEATURE_SUID_CONFIG
 	bool "Enable SUID configuration via /etc/busybox.conf"
 	default y
 	depends on FEATURE_SUID
 	help
-	  Allow the SUID/SGID state of an applet to be determined at runtime
+	Allow the SUID/SGID state of an applet to be determined at runtime
-	  by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+	by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
-	  The format of this file is as follows:
+	The format of this file is as follows:
 
-	  APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
+	APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
 
-	  s: USER or GROUP is allowed to execute APPLET.
+	s: USER or GROUP is allowed to execute APPLET.
-	     APPLET will run under USER or GROUP
+	   APPLET will run under USER or GROUP
-	     (reagardless of who's running it).
+	   (regardless of who's running it).
-	  S: USER or GROUP is NOT allowed to execute APPLET.
+	S: USER or GROUP is NOT allowed to execute APPLET.
-	     APPLET will run under USER or GROUP.
+	   APPLET will run under USER or GROUP.
-	     This option is not very sensical.
+	   This option is not very sensical.
-	  x: USER/GROUP/others are allowed to execute APPLET.
+	x: USER/GROUP/others are allowed to execute APPLET.
-	     No UID/GID change will be done when it is run.
+	   No UID/GID change will be done when it is run.
-	  -: USER/GROUP/others are not allowed to execute APPLET.
+	-: USER/GROUP/others are not allowed to execute APPLET.
 
-	  An example might help:
+	An example might help:
 
-	  [SUID]
+	|[SUID]
-	  su = ssx root.0 # applet su can be run by anyone and runs with
+	|su = ssx root.0 # applet su can be run by anyone and runs with
-	                  # euid=0,egid=0
+	|                # euid=0,egid=0
-	  su = ssx        # exactly the same
+	|su = ssx        # exactly the same
+	|
+	|mount = sx- root.disk # applet mount can be run by root and members
+	|                      # of group disk (but not anyone else)
+	|                      # and runs with euid=0 (egid is not changed)
+	|
+	|cp = --- # disable applet cp for everyone
 
-	  mount = sx- root.disk # applet mount can be run by root and members
+	The file has to be owned by user root, group root and has to be
-	                        # of group disk (but not anyone else)
+	writeable only by root:
-	                        # and runs with euid=0 (egid is not changed)
+		(chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+	The busybox executable has to be owned by user root, group
+	root and has to be setuid root for this to work:
+		(chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
 
-	  cp = --- # disable applet cp for everyone
+	Robert 'sandman' Griebl has more information here:
-
+	<url: http://www.softforge.de/bb/suid.html >.
-	  The file has to be owned by user root, group root and has to be
-	  writeable only by root:
-	        (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
-	  The busybox executable has to be owned by user root, group
-	  root and has to be setuid root for this to work:
-	        (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
-
-	  Robert 'sandman' Griebl has more information here:
-	  <url: http://www.softforge.de/bb/suid.html >.
 
 config FEATURE_SUID_CONFIG_QUIET
 	bool "Suppress warning message if /etc/busybox.conf is not readable"
 	default y
 	depends on FEATURE_SUID_CONFIG
 	help
-	  /etc/busybox.conf should be readable by the user needing the SUID,
+	/etc/busybox.conf should be readable by the user needing the SUID,
-	  check this option to avoid users to be notified about missing
+	check this option to avoid users to be notified about missing
-	  permissions.
+	permissions.
 
 config FEATURE_PREFER_APPLETS
 	bool "exec prefers applets"
 	default n
 	help
-	  This is an experimental option which directs applets about to
+	This is an experimental option which directs applets about to
-	  call 'exec' to try and find an applicable busybox applet before
+	call 'exec' to try and find an applicable busybox applet before
-	  searching the PATH. This is typically done by exec'ing
+	searching the PATH. This is typically done by exec'ing
-	  /proc/self/exe.
+	/proc/self/exe.
 
-	  This may affect shell, find -exec, xargs and similar applets.
+	This may affect shell, find -exec, xargs and similar applets.
-	  They will use applets even if /bin/APPLET -> busybox link
+	They will use applets even if /bin/APPLET -> busybox link
-	  is missing (or is not a link to busybox). However, this causes
+	is missing (or is not a link to busybox). However, this causes
-	  problems in chroot jails without mounted /proc and with ps/top
+	problems in chroot jails without mounted /proc and with ps/top
-	  (command name can be shown as 'exe' for applets started this way).
+	(command name can be shown as 'exe' for applets started this way).
 
 config BUSYBOX_EXEC_PATH
 	string "Path to BusyBox executable"
 	default "/proc/self/exe"
 	help
-	  When Busybox applets need to run other busybox applets, BusyBox
+	When Busybox applets need to run other busybox applets, BusyBox
-	  sometimes needs to exec() itself. When the /proc filesystem is
+	sometimes needs to exec() itself. When the /proc filesystem is
-	  mounted, /proc/self/exe always points to the currently running
+	mounted, /proc/self/exe always points to the currently running
-	  executable. If you haven't got /proc, set this to wherever you
+	executable. If you haven't got /proc, set this to wherever you
-	  want to run BusyBox from.
+	want to run BusyBox from.
 
 config SELINUX
 	bool "Support NSA Security Enhanced Linux"
 	default n
 	select PLATFORM_LINUX
 	help
-	  Enable support for SELinux in applets ls, ps, and id. Also provide
+	Enable support for SELinux in applets ls, ps, and id. Also provide
-	  the option of compiling in SELinux applets.
+	the option of compiling in SELinux applets.
 
-	  If you do not have a complete SELinux userland installed, this stuff
+	If you do not have a complete SELinux userland installed, this stuff
-	  will not compile.  Specifially, libselinux 1.28 or better is
+	will not compile.  Specifially, libselinux 1.28 or better is
-	  directly required by busybox. If the installation is located in a
+	directly required by busybox. If the installation is located in a
-	  non-standard directory, provide it by invoking make as follows:
+	non-standard directory, provide it by invoking make as follows:
 
 		CFLAGS=-I<libselinux-include-path> \
 		LDFLAGS=-L<libselinux-lib-path> \
 		make
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 config FEATURE_CLEAN_UP
 	bool "Clean up all memory before exiting (usually not needed)"
 	default n
 	help
-	  As a size optimization, busybox normally exits without explicitly
+	As a size optimization, busybox normally exits without explicitly
-	  freeing dynamically allocated memory or closing files. This saves
+	freeing dynamically allocated memory or closing files. This saves
-	  space since the OS will clean up for us, but it can confuse debuggers
+	space since the OS will clean up for us, but it can confuse debuggers
-	  like valgrind, which report tons of memory and resource leaks.
+	like valgrind, which report tons of memory and resource leaks.
 
-	  Don't enable this unless you have a really good reason to clean
+	Don't enable this unless you have a really good reason to clean
-	  things up manually.
+	things up manually.
 
 # These are auto-selected by other options
 
@@ -330,26 +330,26 @@ config FEATURE_SYSLOG
 	bool #No description makes it a hidden option
 	default n
 	#help
-	#  This option is auto-selected when you select any applet which may
+	#This option is auto-selected when you select any applet which may
-	#  send its output to syslog. You do not need to select it manually.
+	#send its output to syslog. You do not need to select it manually.
 
 config FEATURE_HAVE_RPC
 	bool #No description makes it a hidden option
 	default n
 	#help
-	#  This is automatically selected if any of enabled applets need it.
+	#This is automatically selected if any of enabled applets need it.
-	#  You do not need to select it manually.
+	#You do not need to select it manually.
 
 config PLATFORM_LINUX
 	bool #No description makes it a hidden option
 	default n
 	#help
-	#  For the most part, busybox requires only POSIX compatibility
+	#For the most part, busybox requires only POSIX compatibility
-	#  from the target system, but some applets and features use
+	#from the target system, but some applets and features use
-	#  Linux-specific interfaces.
+	#Linux-specific interfaces.
 	#
-	#  This is automatically selected if any applet or feature requires
+	#This is automatically selected if any applet or feature requires
-	#  Linux-specific interfaces. You do not need to select it manually.
+	#Linux-specific interfaces. You do not need to select it manually.
 
 comment 'Build Options'
 
@@ -357,37 +357,37 @@ config STATIC
 	bool "Build BusyBox as a static binary (no shared libs)"
 	default n
 	help
-	  If you want to build a static BusyBox binary, which does not
+	If you want to build a static BusyBox binary, which does not
-	  use or require any shared libraries, then enable this option.
+	use or require any shared libraries, then enable this option.
-	  This can cause BusyBox to be considerably larger, so you should
+	This can cause BusyBox to be considerably larger, so you should
-	  leave this option false unless you have a good reason (i.e.
+	leave this option false unless you have a good reason (i.e.
-	  your target platform does not support shared libraries, or
+	your target platform does not support shared libraries, or
-	  you are building an initrd which doesn't need anything but
+	you are building an initrd which doesn't need anything but
-	  BusyBox, etc).
+	BusyBox, etc).
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 config PIE
 	bool "Build BusyBox as a position independent executable"
 	default n
 	depends on !STATIC
 	help
-	  Hardened code option. PIE binaries are loaded at a different
+	Hardened code option. PIE binaries are loaded at a different
-	  address at each invocation. This has some overhead,
+	address at each invocation. This has some overhead,
-	  particularly on x86-32 which is short on registers.
+	particularly on x86-32 which is short on registers.
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 config NOMMU
 	bool "Force NOMMU build"
 	default n
 	help
-	  Busybox tries to detect whether architecture it is being
+	Busybox tries to detect whether architecture it is being
-	  built against supports MMU or not. If this detection fails,
+	built against supports MMU or not. If this detection fails,
-	  or if you want to build NOMMU version of busybox for testing,
+	or if you want to build NOMMU version of busybox for testing,
-	  you may force NOMMU build here.
+	you may force NOMMU build here.
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 # PIE can be made to work with BUILD_LIBBUSYBOX, but currently
 # build system does not support that
@@ -396,128 +396,128 @@ config BUILD_LIBBUSYBOX
 	default n
 	depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
 	help
-	  Build a shared library libbusybox.so.N.N.N which contains all
+	Build a shared library libbusybox.so.N.N.N which contains all
-	  busybox code.
+	busybox code.
 
-	  This feature allows every applet to be built as a really tiny
+	This feature allows every applet to be built as a really tiny
-	  separate executable linked against the library:
+	separate executable linked against the library:
-	  $ size 0_lib/l*
+	|$ size 0_lib/l*
-	    text  data   bss     dec    hex filename
+	|    text  data   bss     dec    hex filename
-	     939   212    28    1179    49b 0_lib/last
+	|     939   212    28    1179    49b 0_lib/last
-	     939   212    28    1179    49b 0_lib/less
+	|     939   212    28    1179    49b 0_lib/less
-	  919138  8328  1556  929022  e2cfe 0_lib/libbusybox.so.1.N.M
+	|  919138  8328  1556  929022  e2cfe 0_lib/libbusybox.so.1.N.M
 
-	  This is useful on NOMMU systems which are not capable
+	This is useful on NOMMU systems which are not capable
-	  of sharing executables, but are capable of sharing code
+	of sharing executables, but are capable of sharing code
-	  in dynamic libraries.
+	in dynamic libraries.
 
 config FEATURE_LIBBUSYBOX_STATIC
 	bool "Pull in all external references into libbusybox"
 	default n
 	depends on BUILD_LIBBUSYBOX
 	help
-	  Make libbusybox library independent, not using or requiring
+	Make libbusybox library independent, not using or requiring
-	  any other shared libraries.
+	any other shared libraries.
 
 config FEATURE_INDIVIDUAL
 	bool "Produce a binary for each applet, linked against libbusybox"
 	default y
 	depends on BUILD_LIBBUSYBOX
 	help
-	  If your CPU architecture doesn't allow for sharing text/rodata
+	If your CPU architecture doesn't allow for sharing text/rodata
-	  sections of running binaries, but allows for runtime dynamic
+	sections of running binaries, but allows for runtime dynamic
-	  libraries, this option will allow you to reduce memory footprint
+	libraries, this option will allow you to reduce memory footprint
-	  when you have many different applets running at once.
+	when you have many different applets running at once.
 
-	  If your CPU architecture allows for sharing text/rodata,
+	If your CPU architecture allows for sharing text/rodata,
-	  having single binary is more optimal.
+	having single binary is more optimal.
 
-	  Each applet will be a tiny program, dynamically linked
+	Each applet will be a tiny program, dynamically linked
-	  against libbusybox.so.N.N.N.
+	against libbusybox.so.N.N.N.
 
-	  You need to have a working dynamic linker.
+	You need to have a working dynamic linker.
 
 config FEATURE_SHARED_BUSYBOX
 	bool "Produce additional busybox binary linked against libbusybox"
 	default y
 	depends on BUILD_LIBBUSYBOX
 	help
-	  Build busybox, dynamically linked against libbusybox.so.N.N.N.
+	Build busybox, dynamically linked against libbusybox.so.N.N.N.
 
-	  You need to have a working dynamic linker.
+	You need to have a working dynamic linker.
 
 ### config BUILD_AT_ONCE
 ###	bool "Compile all sources at once"
 ###	default n
 ###	help
-###	  Normally each source-file is compiled with one invocation of
+###	Normally each source-file is compiled with one invocation of
-###	  the compiler.
+###	the compiler.
-###	  If you set this option, all sources are compiled at once.
+###	If you set this option, all sources are compiled at once.
-###	  This gives the compiler more opportunities to optimize which can
+###	This gives the compiler more opportunities to optimize which can
-###	  result in smaller and/or faster binaries.
+###	result in smaller and/or faster binaries.
 ###
-###	  Setting this option will consume alot of memory, e.g. if you
+###	Setting this option will consume alot of memory, e.g. if you
-###	  enable all applets with all features, gcc uses more than 300MB
+###	enable all applets with all features, gcc uses more than 300MB
-###	  RAM during compilation of busybox.
+###	RAM during compilation of busybox.
 ###
-###	  This option is most likely only beneficial for newer compilers
+###	This option is most likely only beneficial for newer compilers
-###	  such as gcc-4.1 and above.
+###	such as gcc-4.1 and above.
 ###
-###	  Say 'N' unless you know what you are doing.
+###	Say 'N' unless you know what you are doing.
 
 config CROSS_COMPILER_PREFIX
 	string "Cross Compiler prefix"
 	default ""
 	help
-	  If you want to build BusyBox with a cross compiler, then you
+	If you want to build BusyBox with a cross compiler, then you
-	  will need to set this to the cross-compiler prefix, for example,
+	will need to set this to the cross-compiler prefix, for example,
-	  "i386-uclibc-".
+	"i386-uclibc-".
 
-	  Note that CROSS_COMPILE environment variable or
+	Note that CROSS_COMPILE environment variable or
-	  "make CROSS_COMPILE=xxx ..." will override this selection.
+	"make CROSS_COMPILE=xxx ..." will override this selection.
 
-	  Native builds leave this empty.
+	Native builds leave this empty.
 
 config SYSROOT
 	string "Path to sysroot"
 	default ""
 	help
-	  If you want to build BusyBox with a cross compiler, then you
+	If you want to build BusyBox with a cross compiler, then you
-	  might also need to specify where /usr/include and /usr/lib
+	might also need to specify where /usr/include and /usr/lib
-	  will be found.
+	will be found.
 
-	  For example, BusyBox can be built against an installed
+	For example, BusyBox can be built against an installed
-	  Android NDK, platform version 9, for ARM ABI with
+	Android NDK, platform version 9, for ARM ABI with
 
-	  CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
+	CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
 
-	  Native builds leave this empty.
+	Native builds leave this empty.
 
 config EXTRA_CFLAGS
 	string "Additional CFLAGS"
 	default ""
 	help
-	  Additional CFLAGS to pass to the compiler verbatim.
+	Additional CFLAGS to pass to the compiler verbatim.
 
 config EXTRA_LDFLAGS
 	string "Additional LDFLAGS"
 	default ""
 	help
-	  Additional LDFLAGS to pass to the linker verbatim.
+	Additional LDFLAGS to pass to the linker verbatim.
 
 config EXTRA_LDLIBS
 	string "Additional LDLIBS"
 	default ""
 	help
-	  Additional LDLIBS to pass to the linker with -l.
+	Additional LDLIBS to pass to the linker with -l.
 
 config USE_PORTABLE_CODE
 	bool "Avoid using GCC-specific code constructs"
 	default n
 	help
-	  Use this option if you are trying to compile busybox with
+	Use this option if you are trying to compile busybox with
-	  compiler other than gcc.
+	compiler other than gcc.
-	  If you do use gcc, this option may needlessly increase code size.
+	If you do use gcc, this option may needlessly increase code size.
 
 comment 'Installation Options ("make install" behavior)'
 
@@ -525,32 +525,32 @@ choice
 	prompt "What kind of applet links to install"
 	default INSTALL_APPLET_SYMLINKS
 	help
-	  Choose what kind of links to applets are created by "make install".
+	Choose what kind of links to applets are created by "make install".
 
 config INSTALL_APPLET_SYMLINKS
 	bool "as soft-links"
 	help
-	  Install applets as soft-links to the busybox binary. This needs some
+	Install applets as soft-links to the busybox binary. This needs some
-	  free inodes on the filesystem, but might help with filesystem
+	free inodes on the filesystem, but might help with filesystem
-	  generators that can't cope with hard-links.
+	generators that can't cope with hard-links.
 
 config INSTALL_APPLET_HARDLINKS
 	bool "as hard-links"
 	help
-	  Install applets as hard-links to the busybox binary. This might
+	Install applets as hard-links to the busybox binary. This might
-	  count on a filesystem with few inodes.
+	count on a filesystem with few inodes.
 
 config INSTALL_APPLET_SCRIPT_WRAPPERS
 	bool "as script wrappers"
 	help
-	  Install applets as script wrappers that call the busybox binary.
+	Install applets as script wrappers that call the busybox binary.
 
 config INSTALL_APPLET_DONT
 	bool "not installed"
 	help
-	  Do not install applet links. Useful when you plan to use
+	Do not install applet links. Useful when you plan to use
-	  busybox --install for installing links, or plan to use
+	busybox --install for installing links, or plan to use
-	  a standalone shell and thus don't need applet links.
+	a standalone shell and thus don't need applet links.
 
 endchoice
 
@@ -559,23 +559,23 @@ choice
 	default INSTALL_SH_APPLET_SYMLINK
 	depends on INSTALL_APPLET_SCRIPT_WRAPPERS
 	help
-	  Choose how you install /bin/sh applet link.
+	Choose how you install /bin/sh applet link.
 
 config INSTALL_SH_APPLET_SYMLINK
 	bool "as soft-link"
 	help
-	  Install /bin/sh applet as soft-link to the busybox binary.
+	Install /bin/sh applet as soft-link to the busybox binary.
 
 config INSTALL_SH_APPLET_HARDLINK
 	bool "as hard-link"
 	help
-	  Install /bin/sh applet as hard-link to the busybox binary.
+	Install /bin/sh applet as hard-link to the busybox binary.
 
 config INSTALL_SH_APPLET_SCRIPT_WRAPPER
 	bool "as script wrapper"
 	help
-	  Install /bin/sh applet as script wrapper that calls
+	Install /bin/sh applet as script wrapper that calls
-	  the busybox binary.
+	the busybox binary.
 
 endchoice
 
@@ -583,7 +583,7 @@ config PREFIX
 	string "BusyBox installation prefix"
 	default "./_install"
 	help
-	  Define your directory to install BusyBox files/subdirs in.
+	Define your directory to install BusyBox files/subdirs in.
 
 comment 'Debugging Options'
 
@@ -591,81 +591,81 @@ config DEBUG
 	bool "Build BusyBox with extra Debugging symbols"
 	default n
 	help
-	  Say Y here if you wish to examine BusyBox internals while applets are
+	Say Y here if you wish to examine BusyBox internals while applets are
-	  running. This increases the size of the binary considerably, and
+	running. This increases the size of the binary considerably, and
-	  should only be used when doing development. If you are doing
+	should only be used when doing development. If you are doing
-	  development and want to debug BusyBox, answer Y.
+	development and want to debug BusyBox, answer Y.
 
-	  Most people should answer N.
+	Most people should answer N.
 
 config DEBUG_PESSIMIZE
 	bool "Disable compiler optimizations"
 	default n
 	depends on DEBUG
 	help
-	  The compiler's optimization of source code can eliminate and reorder
+	The compiler's optimization of source code can eliminate and reorder
-	  code, resulting in an executable that's hard to understand when
+	code, resulting in an executable that's hard to understand when
-	  stepping through it with a debugger. This switches it off, resulting
+	stepping through it with a debugger. This switches it off, resulting
-	  in a much bigger executable that more closely matches the source
+	in a much bigger executable that more closely matches the source
-	  code.
+	code.
 
 config DEBUG_SANITIZE
 	bool "Enable runtime sanitizers (ASAN/LSAN/USAN/etc...)"
 	default n
 	help
-	  Say Y here if you want to enable runtime sanitizers. These help
+	Say Y here if you want to enable runtime sanitizers. These help
-	  catch bad memory accesses (e.g. buffer overflows), but will make
+	catch bad memory accesses (e.g. buffer overflows), but will make
-	  the executable larger and slow down runtime a bit.
+	the executable larger and slow down runtime a bit.
 
-	  This adds -fsanitize=foo options to gcc command line.
+	This adds -fsanitize=foo options to gcc command line.
 
-	  If you aren't developing/testing busybox, say N here.
+	If you aren't developing/testing busybox, say N here.
 
 config UNIT_TEST
 	bool "Build unit tests"
 	default n
 	help
-	  Say Y here if you want to build unit tests (both the framework and
+	Say Y here if you want to build unit tests (both the framework and
-	  test cases) as a Busybox applet. This results in bigger code, so you
+	test cases) as a Busybox applet. This results in bigger code, so you
-	  probably don't want this option in production builds.
+	probably don't want this option in production builds.
 
 config WERROR
 	bool "Abort compilation on any warning"
 	default n
 	help
-	  This adds -Werror to gcc command line.
+	This adds -Werror to gcc command line.
 
-	  Most people should answer N.
+	Most people should answer N.
 
 choice
 	prompt "Additional debugging library"
 	default NO_DEBUG_LIB
 	help
-	  Using an additional debugging library will make BusyBox become
+	Using an additional debugging library will make BusyBox become
-	  considerable larger and will cause it to run more slowly. You
+	considerable larger and will cause it to run more slowly. You
-	  should always leave this option disabled for production use.
+	should always leave this option disabled for production use.
 
-	  dmalloc support:
+	dmalloc support:
-	  ----------------
+	----------------
-	  This enables compiling with dmalloc ( http://dmalloc.com/ )
+	This enables compiling with dmalloc ( http://dmalloc.com/ )
-	  which is an excellent public domain mem leak and malloc problem
+	which is an excellent public domain mem leak and malloc problem
-	  detector. To enable dmalloc, before running busybox you will
+	detector. To enable dmalloc, before running busybox you will
-	  want to properly set your environment, for example:
+	want to properly set your environment, for example:
-	    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+		export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-	  The 'debug=' value is generated using the following command
+	The 'debug=' value is generated using the following command
-	    dmalloc -p log-stats -p log-non-free -p log-bad-space \
+	dmalloc -p log-stats -p log-non-free -p log-bad-space \
-	       -p log-elapsed-time -p check-fence -p check-heap \
+		-p log-elapsed-time -p check-fence -p check-heap \
-	       -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+		-p check-lists -p check-blank -p check-funcs -p realloc-copy \
-	       -p allow-free-null
+		-p allow-free-null
 
-	  Electric-fence support:
+	Electric-fence support:
-	  -----------------------
+	-----------------------
-	  This enables compiling with Electric-fence support. Electric
+	This enables compiling with Electric-fence support. Electric
-	  fence is another very useful malloc debugging library which uses
+	fence is another very useful malloc debugging library which uses
-	  your computer's virtual memory hardware to detect illegal memory
+	your computer's virtual memory hardware to detect illegal memory
-	  accesses. This support will make BusyBox be considerable larger
+	accesses. This support will make BusyBox be considerable larger
-	  and run slower, so you should leave this option disabled unless
+	and run slower, so you should leave this option disabled unless
-	  you are hunting a hard to find memory problem.
+	you are hunting a hard to find memory problem.
 
 
 config NO_DEBUG_LIB

archival/Config.src

@@ -32,7 +32,7 @@ config FEATURE_LZMA_FAST
 	default n
 	depends on UNLZMA || LZCAT || LZMA || FEATURE_SEAMLESS_LZMA
 	help
-	  This option reduces decompression time by about 25% at the cost of
+	This option reduces decompression time by about 25% at the cost of
-	  a 1K bigger binary.
+	a 1K bigger binary.
 
 endmenu

archival/ar.c

@@ -21,29 +21,29 @@
 //config:	bool "ar (9.5 kb)"
 //config:	default n  # needs to be improved to be able to replace binutils ar
 //config:	help
-//config:	  ar is an archival utility program used to create, modify, and
+//config:	ar is an archival utility program used to create, modify, and
-//config:	  extract contents from archives. In practice, it is used exclusively
+//config:	extract contents from archives. In practice, it is used exclusively
-//config:	  for object module archives used by compilers.
+//config:	for object module archives used by compilers.
 //config:
-//config:	  Unless you have a specific application which requires ar, you should
+//config:	Unless you have a specific application which requires ar, you should
-//config:	  probably say N here: most compilers come with their own ar utility.
+//config:	probably say N here: most compilers come with their own ar utility.
 //config:
 //config:config FEATURE_AR_LONG_FILENAMES
 //config:	bool "Support long filenames (not needed for debs)"
 //config:	default y
 //config:	depends on AR
 //config:	help
-//config:	  By default the ar format can only store the first 15 characters
+//config:	By default the ar format can only store the first 15 characters
-//config:	  of the filename, this option removes that limitation.
+//config:	of the filename, this option removes that limitation.
-//config:	  It supports the GNU ar long filename method which moves multiple long
+//config:	It supports the GNU ar long filename method which moves multiple long
-//config:	  filenames into a the data section of a new ar entry.
+//config:	filenames into a the data section of a new ar entry.
 //config:
 //config:config FEATURE_AR_CREATE
 //config:	bool "Support archive creation"
 //config:	default y
 //config:	depends on AR
 //config:	help
-//config:	  This enables archive creation (-c and -r) with busybox ar.
+//config:	This enables archive creation (-c and -r) with busybox ar.
 
 //applet:IF_AR(APPLET(ar, BB_DIR_USR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_AR) += ar.o

archival/bbunzip.c

@@ -240,8 +240,8 @@ char* FAST_FUNC make_new_name_generic(char *filename, const char *expected_ext)
 //config:	bool "uncompress (7.1 kb)"
 //config:	default n  # ancient
 //config:	help
-//config:	  uncompress is used to decompress archives created by compress.
+//config:	uncompress is used to decompress archives created by compress.
-//config:	  Not much used anymore, replaced by gzip/gunzip.
+//config:	Not much used anymore, replaced by gzip/gunzip.
 
 //applet:IF_UNCOMPRESS(APPLET(uncompress, BB_DIR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_UNCOMPRESS) += bbunzip.o
@@ -316,16 +316,16 @@ int uncompress_main(int argc UNUSED_PARAM, char **argv)
 //config:	default y
 //config:	select FEATURE_GZIP_DECOMPRESS
 //config:	help
-//config:	  gunzip is used to decompress archives created by gzip.
+//config:	gunzip is used to decompress archives created by gzip.
-//config:	  You can use the `-t' option to test the integrity of
+//config:	You can use the `-t' option to test the integrity of
-//config:	  an archive, without decompressing it.
+//config:	an archive, without decompressing it.
 //config:
 //config:config ZCAT
 //config:	bool "zcat (25 kb)"
 //config:	default y
 //config:	select FEATURE_GZIP_DECOMPRESS
 //config:	help
-//config:	  Alias to "gunzip -c".
+//config:	Alias to "gunzip -c".
 //config:
 //config:config FEATURE_GUNZIP_LONG_OPTIONS
 //config:	bool "Enable long options"
@@ -429,21 +429,21 @@ int gunzip_main(int argc UNUSED_PARAM, char **argv)
 //config:	default y
 //config:	select FEATURE_BZIP2_DECOMPRESS
 //config:	help
-//config:	  bunzip2 is a compression utility using the Burrows-Wheeler block
+//config:	bunzip2 is a compression utility using the Burrows-Wheeler block
-//config:	  sorting text compression algorithm, and Huffman coding. Compression
+//config:	sorting text compression algorithm, and Huffman coding. Compression
-//config:	  is generally considerably better than that achieved by more
+//config:	is generally considerably better than that achieved by more
-//config:	  conventional LZ77/LZ78-based compressors, and approaches the
+//config:	conventional LZ77/LZ78-based compressors, and approaches the
-//config:	  performance of the PPM family of statistical compressors.
+//config:	performance of the PPM family of statistical compressors.
 //config:
-//config:	  Unless you have a specific application which requires bunzip2, you
+//config:	Unless you have a specific application which requires bunzip2, you
-//config:	  should probably say N here.
+//config:	should probably say N here.
 //config:
 //config:config BZCAT
 //config:	bool "bzcat (8.8 kb)"
 //config:	default y
 //config:	select FEATURE_BZIP2_DECOMPRESS
 //config:	help
-//config:	  Alias to "bunzip2 -c".
+//config:	Alias to "bunzip2 -c".
 
 //applet:IF_BUNZIP2(APPLET(bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
 //                APPLET_ODDNAME:name   main     location        suid_type     help
@@ -496,23 +496,23 @@ int bunzip2_main(int argc UNUSED_PARAM, char **argv)
 //config:	bool "unlzma (8.6 kb)"
 //config:	default y
 //config:	help
-//config:	  unlzma is a compression utility using the Lempel-Ziv-Markov chain
+//config:	unlzma is a compression utility using the Lempel-Ziv-Markov chain
-//config:	  compression algorithm, and range coding. Compression
+//config:	compression algorithm, and range coding. Compression
-//config:	  is generally considerably better than that achieved by the bzip2
+//config:	is generally considerably better than that achieved by the bzip2
-//config:	  compressors.
+//config:	compressors.
 //config:
 //config:config LZCAT
 //config:	bool "lzcat (8.5 kb)"
 //config:	default y
 //config:	help
-//config:	  Alias to "unlzma -c".
+//config:	Alias to "unlzma -c".
 //config:
 //config:config LZMA
 //config:	bool "lzma -d"
 //config:	default y
 //config:	help
-//config:	  Enable this option if you want commands like "lzma -d" to work.
+//config:	Enable this option if you want commands like "lzma -d" to work.
-//config:	  IOW: you'll get lzma applet, but it will always require -d option.
+//config:	IOW: you'll get lzma applet, but it will always require -d option.
 
 //applet:IF_UNLZMA(APPLET(unlzma, BB_DIR_USR_BIN, BB_SUID_DROP))
 //                APPLET_ODDNAME:name   main    location        suid_type     help
@@ -567,20 +567,20 @@ int unlzma_main(int argc UNUSED_PARAM, char **argv)
 //config:	bool "unxz (13 kb)"
 //config:	default y
 //config:	help
-//config:	  unxz is a unlzma successor.
+//config:	unxz is a unlzma successor.
 //config:
 //config:config XZCAT
 //config:	bool "xzcat (13 kb)"
 //config:	default y
 //config:	help
-//config:	  Alias to "unxz -c".
+//config:	Alias to "unxz -c".
 //config:
 //config:config XZ
 //config:	bool "xz -d"
 //config:	default y
 //config:	help
-//config:	  Enable this option if you want commands like "xz -d" to work.
+//config:	Enable this option if you want commands like "xz -d" to work.
-//config:	  IOW: you'll get xz applet, but it will always require -d option.
+//config:	IOW: you'll get xz applet, but it will always require -d option.
 
 //applet:IF_UNXZ(APPLET(unxz, BB_DIR_USR_BIN, BB_SUID_DROP))
 //                APPLET_ODDNAME:name   main  location        suid_type     help

archival/bzip2.c

@@ -11,23 +11,23 @@
 //config:	bool "bzip2 (18 kb)"
 //config:	default y
 //config:	help
-//config:	  bzip2 is a compression utility using the Burrows-Wheeler block
+//config:	bzip2 is a compression utility using the Burrows-Wheeler block
-//config:	  sorting text compression algorithm, and Huffman coding. Compression
+//config:	sorting text compression algorithm, and Huffman coding. Compression
-//config:	  is generally considerably better than that achieved by more
+//config:	is generally considerably better than that achieved by more
-//config:	  conventional LZ77/LZ78-based compressors, and approaches the
+//config:	conventional LZ77/LZ78-based compressors, and approaches the
-//config:	  performance of the PPM family of statistical compressors.
+//config:	performance of the PPM family of statistical compressors.
 //config:
-//config:	  Unless you have a specific application which requires bzip2, you
+//config:	Unless you have a specific application which requires bzip2, you
-//config:	  should probably say N here.
+//config:	should probably say N here.
 //config:
 //config:config FEATURE_BZIP2_DECOMPRESS
 //config:	bool "Enable decompression"
 //config:	default y
 //config:	depends on BZIP2 || BUNZIP2 || BZCAT
 //config:	help
-//config:	  Enable -d (--decompress) and -t (--test) options for bzip2.
+//config:	Enable -d (--decompress) and -t (--test) options for bzip2.
-//config:	  This will be automatically selected if bunzip2 or bzcat is
+//config:	This will be automatically selected if bunzip2 or bzcat is
-//config:	  enabled.
+//config:	enabled.
 
 //applet:IF_BZIP2(APPLET(bzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_BZIP2) += bzip2.o

archival/cpio.c

@@ -18,30 +18,30 @@
 //config:	bool "cpio (14 kb)"
 //config:	default y
 //config:	help
-//config:	  cpio is an archival utility program used to create, modify, and
+//config:	cpio is an archival utility program used to create, modify, and
-//config:	  extract contents from archives.
+//config:	extract contents from archives.
-//config:	  cpio has 110 bytes of overheads for every stored file.
+//config:	cpio has 110 bytes of overheads for every stored file.
 //config:
-//config:	  This implementation of cpio can extract cpio archives created in the
+//config:	This implementation of cpio can extract cpio archives created in the
-//config:	  "newc" or "crc" format.
+//config:	"newc" or "crc" format.
 //config:
-//config:	  Unless you have a specific application which requires cpio, you
+//config:	Unless you have a specific application which requires cpio, you
-//config:	  should probably say N here.
+//config:	should probably say N here.
 //config:
 //config:config FEATURE_CPIO_O
 //config:	bool "Support archive creation"
 //config:	default y
 //config:	depends on CPIO
 //config:	help
-//config:	  This implementation of cpio can create cpio archives in the "newc"
+//config:	This implementation of cpio can create cpio archives in the "newc"
-//config:	  format only.
+//config:	format only.
 //config:
 //config:config FEATURE_CPIO_P
 //config:	bool "Support passthrough mode"
 //config:	default y
 //config:	depends on FEATURE_CPIO_O
 //config:	help
-//config:	  Passthrough mode. Rarely used.
+//config:	Passthrough mode. Rarely used.
 
 //applet:IF_CPIO(APPLET(cpio, BB_DIR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_CPIO) += cpio.o

archival/dpkg.c

@@ -31,11 +31,11 @@
 //config:	default y
 //config:	select FEATURE_SEAMLESS_GZ
 //config:	help
-//config:	  dpkg is a medium-level tool to install, build, remove and manage
+//config:	dpkg is a medium-level tool to install, build, remove and manage
-//config:	  Debian packages.
+//config:	Debian packages.
 //config:
-//config:	  This implementation of dpkg has a number of limitations,
+//config:	This implementation of dpkg has a number of limitations,
-//config:	  you should use the official dpkg if possible.
+//config:	you should use the official dpkg if possible.
 
 //applet:IF_DPKG(APPLET(dpkg, BB_DIR_USR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_DPKG) += dpkg.o

archival/dpkg_deb.c

@@ -10,12 +10,12 @@
 //config:	default y
 //config:	select FEATURE_SEAMLESS_GZ
 //config:	help
-//config:	  dpkg-deb unpacks and provides information about Debian archives.
+//config:	dpkg-deb unpacks and provides information about Debian archives.
 //config:
-//config:	  This implementation of dpkg-deb cannot pack archives.
+//config:	This implementation of dpkg-deb cannot pack archives.
 //config:
-//config:	  Unless you have a specific application which requires dpkg-deb,
+//config:	Unless you have a specific application which requires dpkg-deb,
-//config:	  say N here.
+//config:	say N here.
 
 //applet:IF_DPKG_DEB(APPLET_ODDNAME(dpkg-deb, dpkg_deb, BB_DIR_USR_BIN, BB_SUID_DROP, dpkg_deb))
 

archival/gzip.c

@@ -41,8 +41,8 @@ aa:      85.1% -- replaced with aa.gz
 //config:	bool "gzip (19 kb)"
 //config:	default y
 //config:	help
-//config:	  gzip is used to compress files.
+//config:	gzip is used to compress files.
-//config:	  It's probably the most widely used UNIX compression program.
+//config:	It's probably the most widely used UNIX compression program.
 //config:
 //config:config FEATURE_GZIP_LONG_OPTIONS
 //config:	bool "Enable long options"
@@ -55,30 +55,30 @@ aa:      85.1% -- replaced with aa.gz
 //config:	range 0 2
 //config:	depends on GZIP
 //config:	help
-//config:	  Enable big memory options for gzip.
+//config:	Enable big memory options for gzip.
-//config:	  0: small buffers, small hash-tables
+//config:	0: small buffers, small hash-tables
-//config:	  1: larger buffers, larger hash-tables
+//config:	1: larger buffers, larger hash-tables
-//config:	  2: larger buffers, largest hash-tables
+//config:	2: larger buffers, largest hash-tables
-//config:	  Larger models may give slightly better compression
+//config:	Larger models may give slightly better compression
 //config:
 //config:config FEATURE_GZIP_LEVELS
 //config:	bool "Enable compression levels"
 //config:	default n
 //config:	depends on GZIP
 //config:	help
-//config:	  Enable support for compression levels 4-9. The default level
+//config:	Enable support for compression levels 4-9. The default level
-//config:	  is 6. If levels 1-3 are specified, 4 is used.
+//config:	is 6. If levels 1-3 are specified, 4 is used.
-//config:	  If this option is not selected, -N options are ignored and -9
+//config:	If this option is not selected, -N options are ignored and -9
-//config:	  is used.
+//config:	is used.
 //config:
 //config:config FEATURE_GZIP_DECOMPRESS
 //config:	bool "Enable decompression"
 //config:	default y
 //config:	depends on GZIP || GUNZIP || ZCAT
 //config:	help
-//config:	  Enable -d (--decompress) and -t (--test) options for gzip.
+//config:	Enable -d (--decompress) and -t (--test) options for gzip.
-//config:	  This will be automatically selected if gunzip or zcat is
+//config:	This will be automatically selected if gunzip or zcat is
-//config:	  enabled.
+//config:	enabled.
 
 //applet:IF_GZIP(APPLET(gzip, BB_DIR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_GZIP) += gzip.o

archival/lzop.c

@@ -29,28 +29,28 @@
 //config:	bool "lzop (13 kb)"
 //config:	default y
 //config:	help
-//config:	  Lzop compression/decompresion.
+//config:	Lzop compression/decompresion.
 //config:
 //config:config UNLZOP
 //config:	bool "unlzop (13 kb)"
 //config:	default n  # INCOMPAT: upstream lzop does not provide such tool
 //config:	help
-//config:	  Lzop decompresion.
+//config:	Lzop decompresion.
 //config:
 //config:config LZOPCAT
 //config:	bool "lzopcat (13 kb)"
 //config:	default n  # INCOMPAT: upstream lzop does not provide such tool
 //config:	help
-//config:	  Alias to "lzop -dc".
+//config:	Alias to "lzop -dc".
 //config:
 //config:config LZOP_COMPR_HIGH
 //config:	bool "lzop compression levels 7,8,9 (not very useful)"
 //config:	default n
 //config:	depends on LZOP || UNLZOP || LZOPCAT
 //config:	help
-//config:	  High levels (7,8,9) of lzop compression. These levels
+//config:	High levels (7,8,9) of lzop compression. These levels
-//config:	  are actually slower than gzip at equivalent compression ratios
+//config:	are actually slower than gzip at equivalent compression ratios
-//config:	  and take up 3.2K of code.
+//config:	and take up 3.2K of code.
 
 //applet:IF_LZOP(APPLET(lzop, BB_DIR_BIN, BB_SUID_DROP))
 //                  APPLET_ODDNAME:name     main  location        suid_type     help

archival/rpm.c

@@ -11,7 +11,7 @@
 //config:	bool "rpm (33 kb)"
 //config:	default y
 //config:	help
-//config:	  Mini RPM applet - queries and extracts RPM packages.
+//config:	Mini RPM applet - queries and extracts RPM packages.
 
 //applet:IF_RPM(APPLET(rpm, BB_DIR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_RPM) += rpm.o

archival/rpm2cpio.c

@@ -11,7 +11,7 @@
 //config:	bool "rpm2cpio (20 kb)"
 //config:	default y
 //config:	help
-//config:	  Converts a RPM file into a CPIO archive.
+//config:	Converts a RPM file into a CPIO archive.
 
 //applet:IF_RPM2CPIO(APPLET(rpm2cpio, BB_DIR_USR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_RPM2CPIO) += rpm2cpio.o

archival/tar.c

@@ -45,9 +45,9 @@
 //config:	bool "tar (40 kb)"
 //config:	default y
 //config:	help
-//config:	  tar is an archiving program. It's commonly used with gzip to
+//config:	tar is an archiving program. It's commonly used with gzip to
-//config:	  create compressed archives. It's probably the most widely used
+//config:	create compressed archives. It's probably the most widely used
-//config:	  UNIX archive program.
+//config:	UNIX archive program.
 //config:
 //config:config FEATURE_TAR_LONG_OPTIONS
 //config:	bool "Enable long options"
@@ -64,35 +64,35 @@
 //config:	default y
 //config:	depends on TAR && (FEATURE_SEAMLESS_Z || FEATURE_SEAMLESS_GZ || FEATURE_SEAMLESS_BZ2 || FEATURE_SEAMLESS_LZMA || FEATURE_SEAMLESS_XZ)
 //config:	help
-//config:	  With this option tar can automatically detect compressed
+//config:	With this option tar can automatically detect compressed
-//config:	  tarballs. Currently it works only on files (not pipes etc).
+//config:	tarballs. Currently it works only on files (not pipes etc).
 //config:
 //config:config FEATURE_TAR_FROM
 //config:	bool "Enable -X (exclude from) and -T (include from) options)"
 //config:	default y
 //config:	depends on TAR
 //config:	help
-//config:	  If you enable this option you'll be able to specify
+//config:	If you enable this option you'll be able to specify
-//config:	  a list of files to include or exclude from an archive.
+//config:	a list of files to include or exclude from an archive.
 //config:
 //config:config FEATURE_TAR_OLDGNU_COMPATIBILITY
 //config:	bool "Support old tar header format"
 //config:	default y
 //config:	depends on TAR || DPKG
 //config:	help
-//config:	  This option is required to unpack archives created in
+//config:	This option is required to unpack archives created in
-//config:	  the old GNU format; help to kill this old format by
+//config:	the old GNU format; help to kill this old format by
-//config:	  repacking your ancient archives with the new format.
+//config:	repacking your ancient archives with the new format.
 //config:
 //config:config FEATURE_TAR_OLDSUN_COMPATIBILITY
 //config:	bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
 //config:	default y
 //config:	depends on TAR || DPKG
 //config:	help
-//config:	  This option is required to unpack archives created by some old
+//config:	This option is required to unpack archives created by some old
-//config:	  version of Sun's tar (it was calculating checksum using signed
+//config:	version of Sun's tar (it was calculating checksum using signed
-//config:	  arithmetic). It is said to be fixed in newer Sun tar, but "old"
+//config:	arithmetic). It is said to be fixed in newer Sun tar, but "old"
-//config:	  tarballs still exist.
+//config:	tarballs still exist.
 //config:
 //config:config FEATURE_TAR_GNU_EXTENSIONS
 //config:	bool "Support GNU tar extensions (long filenames)"
@@ -104,18 +104,18 @@
 //config:	default y
 //config:	depends on TAR && FEATURE_TAR_LONG_OPTIONS
 //config:	help
-//config:	  If you enable this option you'll be able to instruct tar to send
+//config:	If you enable this option you'll be able to instruct tar to send
-//config:	  the contents of each extracted file to the standard input of an
+//config:	the contents of each extracted file to the standard input of an
-//config:	  external program.
+//config:	external program.
 //config:
 //config:config FEATURE_TAR_UNAME_GNAME
 //config:	bool "Enable use of user and group names"
 //config:	default y
 //config:	depends on TAR
 //config:	help
-//config:	  Enable use of user and group names in tar. This affects contents
+//config:	Enable use of user and group names in tar. This affects contents
-//config:	  listings (-t) and preserving permissions when unpacking (-p).
+//config:	listings (-t) and preserving permissions when unpacking (-p).
-//config:	  +200 bytes.
+//config:	+200 bytes.
 //config:
 //config:config FEATURE_TAR_NOPRESERVE_TIME
 //config:	bool "Enable -m (do not preserve time) GNU option"
@@ -127,8 +127,8 @@
 //config:	default n
 //config:	depends on TAR && SELINUX
 //config:	help
-//config:	  With this option busybox supports restoring SELinux labels
+//config:	With this option busybox supports restoring SELinux labels
-//config:	  when extracting files from tar archives.
+//config:	when extracting files from tar archives.
 
 //applet:IF_TAR(APPLET(tar, BB_DIR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_TAR) += tar.o

archival/unzip.c

@@ -20,20 +20,20 @@
 //config:	bool "unzip (24 kb)"
 //config:	default y
 //config:	help
-//config:	  unzip will list or extract files from a ZIP archive,
+//config:	unzip will list or extract files from a ZIP archive,
-//config:	  commonly found on DOS/WIN systems. The default behavior
+//config:	commonly found on DOS/WIN systems. The default behavior
-//config:	  (with no options) is to extract the archive into the
+//config:	(with no options) is to extract the archive into the
-//config:	  current directory.
+//config:	current directory.
 //config:
 //config:config FEATURE_UNZIP_CDF
 //config:	bool "Read and use Central Directory data"
 //config:	default y
 //config:	depends on UNZIP
 //config:	help
-//config:	  If you know that you only need to deal with simple
+//config:	If you know that you only need to deal with simple
-//config:	  ZIP files without deleted/updated files, SFX archives etc,
+//config:	ZIP files without deleted/updated files, SFX archives etc,
-//config:	  you can reduce code size by unselecting this option.
+//config:	you can reduce code size by unselecting this option.
-//config:	  To support less trivial ZIPs, say Y.
+//config:	To support less trivial ZIPs, say Y.
 //config:
 //config:config FEATURE_UNZIP_BZIP2
 //config:	bool "Support compression method 12 (bzip2)"

console-tools/chvt.c

@@ -11,8 +11,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program is used to change to another terminal.
+//config:	This program is used to change to another terminal.
-//config:	  Example: chvt 4 (change to terminal /dev/tty4)
+//config:	Example: chvt 4 (change to terminal /dev/tty4)
 
 //applet:IF_CHVT(APPLET(chvt, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/clear.c

@@ -10,7 +10,7 @@
 //config:	bool "clear (tiny)"
 //config:	default y
 //config:	help
-//config:	  This program clears the terminal screen.
+//config:	This program clears the terminal screen.
 
 //applet:IF_CLEAR(APPLET(clear, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/deallocvt.c

@@ -12,7 +12,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program deallocates unused virtual consoles.
+//config:	This program deallocates unused virtual consoles.
 
 //applet:IF_DEALLOCVT(APPLET(deallocvt, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/dumpkmap.c

@@ -12,8 +12,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program dumps the kernel's keyboard translation table to
+//config:	This program dumps the kernel's keyboard translation table to
-//config:	  stdout, in binary format. You can then use loadkmap to load it.
+//config:	stdout, in binary format. You can then use loadkmap to load it.
 
 //applet:IF_DUMPKMAP(APPLET(dumpkmap, BB_DIR_BIN, BB_SUID_DROP))
 

console-tools/fgconsole.c

@@ -11,7 +11,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program prints active (foreground) console number.
+//config:	This program prints active (foreground) console number.
 
 //applet:IF_FGCONSOLE(APPLET(fgconsole, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/kbd_mode.c

@@ -13,7 +13,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program reports and sets keyboard mode.
+//config:	This program reports and sets keyboard mode.
 
 //applet:IF_KBD_MODE(APPLET(kbd_mode, BB_DIR_BIN, BB_SUID_DROP))
 

console-tools/loadfont.c

@@ -14,29 +14,29 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program loads a console font from standard input.
+//config:	This program loads a console font from standard input.
 //config:
 //config:config SETFONT
 //config:	bool "setfont (26 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Allows to load console screen map. Useful for i18n.
+//config:	Allows to load console screen map. Useful for i18n.
 //config:
 //config:config FEATURE_SETFONT_TEXTUAL_MAP
 //config:	bool "Support reading textual screen maps"
 //config:	default y
 //config:	depends on SETFONT
 //config:	help
-//config:	  Support reading textual screen maps.
+//config:	Support reading textual screen maps.
 //config:
 //config:config DEFAULT_SETFONT_DIR
 //config:	string "Default directory for console-tools files"
 //config:	default ""
 //config:	depends on SETFONT
 //config:	help
-//config:	  Directory to use if setfont's params are simple filenames
+//config:	Directory to use if setfont's params are simple filenames
-//config:	  (not /path/to/file or ./file). Default is "" (no default directory).
+//config:	(not /path/to/file or ./file). Default is "" (no default directory).
 //config:
 //config:comment "Common options for loadfont and setfont"
 //config:	depends on LOADFONT || SETFONT

console-tools/loadkmap.c

@@ -11,8 +11,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program loads a keyboard translation table from
+//config:	This program loads a keyboard translation table from
-//config:	  standard input.
+//config:	standard input.
 
 //applet:IF_LOADKMAP(APPLET(loadkmap, BB_DIR_SBIN, BB_SUID_DROP))
 

console-tools/openvt.c

@@ -12,8 +12,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program is used to start a command on an unused
+//config:	This program is used to start a command on an unused
-//config:	  virtual terminal.
+//config:	virtual terminal.
 
 //applet:IF_OPENVT(APPLET(openvt, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/reset.c

@@ -13,8 +13,8 @@
 //config:	bool "reset (275 bytes)"
 //config:	default y
 //config:	help
-//config:	  This program is used to reset the terminal screen, if it
+//config:	This program is used to reset the terminal screen, if it
-//config:	  gets messed up.
+//config:	gets messed up.
 
 //applet:IF_RESET(APPLET(reset, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/resize.c

@@ -10,18 +10,18 @@
 //config:	bool "resize (756 bytes)"
 //config:	default y
 //config:	help
-//config:	  This program is used to (re)set the width and height of your current
+//config:	This program is used to (re)set the width and height of your current
-//config:	  terminal.
+//config:	terminal.
 //config:
 //config:config FEATURE_RESIZE_PRINT
 //config:	bool "Print environment variables"
 //config:	default y
 //config:	depends on RESIZE
 //config:	help
-//config:	  Prints the newly set size (number of columns and rows) of
+//config:	Prints the newly set size (number of columns and rows) of
-//config:	  the terminal.
+//config:	the terminal.
-//config:	  E.g.:
+//config:	E.g.:
-//config:	  COLUMNS=80;LINES=44;export COLUMNS LINES;
+//config:	COLUMNS=80;LINES=44;export COLUMNS LINES;
 
 //applet:IF_RESIZE(APPLET(resize, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/setconsole.c

@@ -12,8 +12,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program redirects the system console to another device,
+//config:	This program redirects the system console to another device,
-//config:	  like the current tty while logged in via telnet.
+//config:	like the current tty while logged in via telnet.
 //config:
 //config:config FEATURE_SETCONSOLE_LONG_OPTIONS
 //config:	bool "Enable long options"

console-tools/setkeycodes.c

@@ -13,8 +13,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program loads entries into the kernel's scancode-to-keycode
+//config:	This program loads entries into the kernel's scancode-to-keycode
-//config:	  map, allowing unusual keyboards to generate usable keycodes.
+//config:	map, allowing unusual keyboards to generate usable keycodes.
 
 //applet:IF_SETKEYCODES(APPLET(setkeycodes, BB_DIR_USR_BIN, BB_SUID_DROP))
 

console-tools/setlogcons.c

@@ -13,7 +13,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This program redirects the output console of kernel messages.
+//config:	This program redirects the output console of kernel messages.
 
 //applet:IF_SETLOGCONS(APPLET(setlogcons, BB_DIR_USR_SBIN, BB_SUID_DROP))
 

console-tools/showkey.c

@@ -11,7 +11,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Shows keys pressed.
+//config:	Shows keys pressed.
 
 //applet:IF_SHOWKEY(APPLET(showkey, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/Config.src

@@ -13,9 +13,9 @@ config FEATURE_VERBOSE
 	bool "Support verbose options (usually -v) for various applets"
 	default y
 	help
-	  Enable cp -v, rm -v and similar messages.
+	Enable cp -v, rm -v and similar messages.
-	  Also enables long option (--verbose) if it exists.
+	Also enables long option (--verbose) if it exists.
-	  Without this option, -v is accepted but ignored.
+	Without this option, -v is accepted but ignored.
 
 comment "Common options for cp and mv"
 	depends on CP || MV
@@ -25,7 +25,7 @@ config FEATURE_PRESERVE_HARDLINKS
 	default y
 	depends on CP || MV
 	help
-	  Allow cp and mv to preserve hard links.
+	Allow cp and mv to preserve hard links.
 
 comment "Common options for df, du, ls"
 	depends on DF || DU || LS
@@ -35,6 +35,6 @@ config FEATURE_HUMAN_READABLE
 	default y
 	depends on DF || DU || LS
 	help
-	  Allow df, du, and ls to have human readable output.
+	Allow df, du, and ls to have human readable output.
 
 endmenu

coreutils/basename.c

@@ -18,9 +18,9 @@
 //config:	bool "basename (371 bytes)"
 //config:	default y
 //config:	help
-//config:	  basename is used to strip the directory and suffix from filenames,
+//config:	basename is used to strip the directory and suffix from filenames,
-//config:	  leaving just the filename itself. Enable this option if you wish
+//config:	leaving just the filename itself. Enable this option if you wish
-//config:	  to enable the 'basename' utility.
+//config:	to enable the 'basename' utility.
 
 //applet:IF_BASENAME(APPLET_NOFORK(basename, basename, BB_DIR_USR_BIN, BB_SUID_DROP, basename))
 

coreutils/cat.c

@@ -10,22 +10,22 @@
 //config:	bool "cat (5.6 kb)"
 //config:	default y
 //config:	help
-//config:	  cat is used to concatenate files and print them to the standard
+//config:	cat is used to concatenate files and print them to the standard
-//config:	  output. Enable this option if you wish to enable the 'cat' utility.
+//config:	output. Enable this option if you wish to enable the 'cat' utility.
 //config:
 //config:config FEATURE_CATN
 //config:	bool "Enable -n and -b options"
 //config:	default y
 //config:	depends on CAT
 //config:	help
-//config:	  -n numbers all output lines while -b numbers nonempty output lines.
+//config:	-n numbers all output lines while -b numbers nonempty output lines.
 //config:
 //config:config FEATURE_CATV
 //config:	bool "cat -v[etA]"
 //config:	default y
 //config:	depends on CAT
 //config:	help
-//config:	  Display nonprinting characters as escape sequences
+//config:	Display nonprinting characters as escape sequences
 
 //applet:IF_CAT(APPLET(cat, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/chgrp.c

@@ -10,7 +10,7 @@
 //config:	bool "chgrp (7.2 kb)"
 //config:	default y
 //config:	help
-//config:	  chgrp is used to change the group ownership of files.
+//config:	chgrp is used to change the group ownership of files.
 
 //applet:IF_CHGRP(APPLET_NOEXEC(chgrp, chgrp, BB_DIR_BIN, BB_SUID_DROP, chgrp))
 

coreutils/chmod.c

@@ -13,7 +13,7 @@
 //config:	bool "chmod (5.1 kb)"
 //config:	default y
 //config:	help
-//config:	  chmod is used to change the access permission of files.
+//config:	chmod is used to change the access permission of files.
 
 //applet:IF_CHMOD(APPLET_NOEXEC(chmod, chmod, BB_DIR_BIN, BB_SUID_DROP, chmod))
 

coreutils/chown.c

@@ -10,8 +10,8 @@
 //config:	bool "chown (7.2 kb)"
 //config:	default y
 //config:	help
-//config:	  chown is used to change the user and/or group ownership
+//config:	chown is used to change the user and/or group ownership
-//config:	  of files.
+//config:	of files.
 //config:
 //config:config FEATURE_CHOWN_LONG_OPTIONS
 //config:	bool "Enable long options"

coreutils/chroot.c

@@ -10,8 +10,8 @@
 //config:	bool "chroot (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  chroot is used to change the root directory and run a command.
+//config:	chroot is used to change the root directory and run a command.
-//config:	  The default command is `/bin/sh'.
+//config:	The default command is `/bin/sh'.
 
 //applet:IF_CHROOT(APPLET(chroot, BB_DIR_USR_SBIN, BB_SUID_DROP))
 

coreutils/cksum.c

@@ -10,7 +10,7 @@
 //config:	bool "cksum (4.2 kb)"
 //config:	default y
 //config:	help
-//config:	  cksum is used to calculate the CRC32 checksum of a file.
+//config:	cksum is used to calculate the CRC32 checksum of a file.
 
 //applet:IF_CKSUM(APPLET_NOEXEC(cksum, cksum, BB_DIR_USR_BIN, BB_SUID_DROP, cksum))
 

coreutils/comm.c

@@ -10,8 +10,8 @@
 //config:	bool "comm (3.9 kb)"
 //config:	default y
 //config:	help
-//config:	  comm is used to compare two files line by line and return
+//config:	comm is used to compare two files line by line and return
-//config:	  a three-column output.
+//config:	a three-column output.
 
 //applet:IF_COMM(APPLET(comm, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/cp.c

@@ -15,15 +15,15 @@
 //config:	bool "cp (9.7 kb)"
 //config:	default y
 //config:	help
-//config:	  cp is used to copy files and directories.
+//config:	cp is used to copy files and directories.
 //config:
 //config:config FEATURE_CP_LONG_OPTIONS
 //config:	bool "Enable long options"
 //config:	default y
 //config:	depends on CP && LONG_OPTS
 //config:	help
-//config:	  Enable long options.
+//config:	Enable long options.
-//config:	  Also add support for --parents option.
+//config:	Also add support for --parents option.
 
 //applet:IF_CP(APPLET_NOEXEC(cp, cp, BB_DIR_BIN, BB_SUID_DROP, cp))
 

coreutils/cut.c

@@ -12,8 +12,8 @@
 //config:	bool "cut (5.3 kb)"
 //config:	default y
 //config:	help
-//config:	  cut is used to print selected parts of lines from
+//config:	cut is used to print selected parts of lines from
-//config:	  each file to stdout.
+//config:	each file to stdout.
 
 //applet:IF_CUT(APPLET_NOEXEC(cut, cut, BB_DIR_USR_BIN, BB_SUID_DROP, cut))
 

coreutils/date.c

@@ -22,16 +22,16 @@
 //config:	bool "date (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  date is used to set the system date or display the
+//config:	date is used to set the system date or display the
-//config:	  current time in the given format.
+//config:	current time in the given format.
 //config:
 //config:config FEATURE_DATE_ISOFMT
 //config:	bool "Enable ISO date format output (-I)"
 //config:	default y
 //config:	depends on DATE
 //config:	help
-//config:	  Enable option (-I) to output an ISO-8601 compliant
+//config:	Enable option (-I) to output an ISO-8601 compliant
-//config:	  date/time string.
+//config:	date/time string.
 //config:
 //config:# defaults to "no": stat's nanosecond field is a bit non-portable
 //config:config FEATURE_DATE_NANO
@@ -40,23 +40,23 @@
 //config:	depends on DATE  # syscall(__NR_clock_gettime)
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Support %[num]N format specifier. Adds ~250 bytes of code.
+//config:	Support %[num]N format specifier. Adds ~250 bytes of code.
 //config:
 //config:config FEATURE_DATE_COMPAT
 //config:	bool "Support weird 'date MMDDhhmm[[YY]YY][.ss]' format"
 //config:	default y
 //config:	depends on DATE
 //config:	help
-//config:	  System time can be set by 'date -s DATE' and simply 'date DATE',
+//config:	System time can be set by 'date -s DATE' and simply 'date DATE',
-//config:	  but formats of DATE string are different. 'date DATE' accepts
+//config:	but formats of DATE string are different. 'date DATE' accepts
-//config:	  a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
+//config:	a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
-//config:	  unnatural placement of year between minutes and seconds.
+//config:	unnatural placement of year between minutes and seconds.
-//config:	  date -s (and other commands like touch -d) use more sensible
+//config:	date -s (and other commands like touch -d) use more sensible
-//config:	  formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
+//config:	formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
 //config:
-//config:	  With this option off, 'date DATE' is 'date -s DATE' support
+//config:	With this option off, 'date DATE' is 'date -s DATE' support
-//config:	  the same format. With it on, 'date DATE' additionally supports
+//config:	the same format. With it on, 'date DATE' additionally supports
-//config:	  MMDDhhmm[[YY]YY][.ss] format.
+//config:	MMDDhhmm[[YY]YY][.ss] format.
 
 //applet:IF_DATE(APPLET(date, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/dd.c

@@ -10,46 +10,46 @@
 //config:	bool "dd (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  dd copies a file (from standard input to standard output,
+//config:	dd copies a file (from standard input to standard output,
-//config:	  by default) using specific input and output blocksizes,
+//config:	by default) using specific input and output blocksizes,
-//config:	  while optionally performing conversions on it.
+//config:	while optionally performing conversions on it.
 //config:
 //config:config FEATURE_DD_SIGNAL_HANDLING
 //config:	bool "Enable signal handling for status reporting"
 //config:	default y
 //config:	depends on DD
 //config:	help
-//config:	  Sending a SIGUSR1 signal to a running `dd' process makes it
+//config:	Sending a SIGUSR1 signal to a running `dd' process makes it
-//config:	  print to standard error the number of records read and written
+//config:	print to standard error the number of records read and written
-//config:	  so far, then to resume copying.
+//config:	so far, then to resume copying.
 //config:
-//config:	  $ dd if=/dev/zero of=/dev/null &
+//config:	$ dd if=/dev/zero of=/dev/null &
-//config:	  $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
+//config:	$ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
-//config:	  10899206+0 records in
+//config:	10899206+0 records in
-//config:	  10899206+0 records out
+//config:	10899206+0 records out
 //config:
 //config:config FEATURE_DD_THIRD_STATUS_LINE
 //config:	bool "Enable the third status line upon signal"
 //config:	default y
 //config:	depends on DD && FEATURE_DD_SIGNAL_HANDLING
 //config:	help
-//config:	  Displays a coreutils-like third status line with transferred bytes,
+//config:	Displays a coreutils-like third status line with transferred bytes,
-//config:	  elapsed time and speed.
+//config:	elapsed time and speed.
 //config:
 //config:config FEATURE_DD_IBS_OBS
 //config:	bool "Enable ibs, obs and conv options"
 //config:	default y
 //config:	depends on DD
 //config:	help
-//config:	  Enable support for writing a certain number of bytes in and out,
+//config:	Enable support for writing a certain number of bytes in and out,
-//config:	  at a time, and performing conversions on the data stream.
+//config:	at a time, and performing conversions on the data stream.
 //config:
 //config:config FEATURE_DD_STATUS
 //config:	bool "Enable status display options"
 //config:	default y
 //config:	depends on DD
 //config:	help
-//config:	  Enable support for status=noxfer/none option.
+//config:	Enable support for status=noxfer/none option.
 
 //applet:IF_DD(APPLET_NOEXEC(dd, dd, BB_DIR_BIN, BB_SUID_DROP, dd))
 

coreutils/df.c

@@ -21,17 +21,17 @@
 //config:	bool "df (7.5 kb)"
 //config:	default y
 //config:	help
-//config:	  df reports the amount of disk space used and available
+//config:	df reports the amount of disk space used and available
-//config:	  on filesystems.
+//config:	on filesystems.
 //config:
 //config:config FEATURE_DF_FANCY
 //config:	bool "Enable -a, -i, -B"
 //config:	default y
 //config:	depends on DF
 //config:	help
-//config:	  -a Show all filesystems
+//config:	-a Show all filesystems
-//config:	  -i Inodes
+//config:	-i Inodes
-//config:	  -B <SIZE> Blocksize
+//config:	-B <SIZE> Blocksize
 
 //applet:IF_DF(APPLET(df, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/dirname.c

@@ -10,8 +10,8 @@
 //config:	bool "dirname (289 bytes)"
 //config:	default y
 //config:	help
-//config:	  dirname is used to strip a non-directory suffix from
+//config:	dirname is used to strip a non-directory suffix from
-//config:	  a file name.
+//config:	a file name.
 
 //applet:IF_DIRNAME(APPLET_NOFORK(dirname, dirname, BB_DIR_USR_BIN, BB_SUID_DROP, dirname))
 

coreutils/dos2unix.c

@@ -15,15 +15,15 @@
 //config:	bool "dos2unix (5.1 kb)"
 //config:	default y
 //config:	help
-//config:	  dos2unix is used to convert a text file from DOS format to
+//config:	dos2unix is used to convert a text file from DOS format to
-//config:	  UNIX format, and vice versa.
+//config:	UNIX format, and vice versa.
 //config:
 //config:config UNIX2DOS
 //config:	bool "unix2dos (5.1 kb)"
 //config:	default y
 //config:	help
-//config:	  unix2dos is used to convert a text file from UNIX format to
+//config:	unix2dos is used to convert a text file from UNIX format to
-//config:	  DOS format, and vice versa.
+//config:	DOS format, and vice versa.
 
 //applet:IF_DOS2UNIX(APPLET_NOEXEC(dos2unix, dos2unix, BB_DIR_USR_BIN, BB_SUID_DROP, dos2unix))
 //applet:IF_UNIX2DOS(APPLET_NOEXEC(unix2dos, dos2unix, BB_DIR_USR_BIN, BB_SUID_DROP, unix2dos))

coreutils/du.c

@@ -22,15 +22,15 @@
 //config:	bool "du (default blocksize of 512 bytes)"
 //config:	default y
 //config:	help
-//config:	  du is used to report the amount of disk space used
+//config:	du is used to report the amount of disk space used
-//config:	  for specified files.
+//config:	for specified files.
 //config:
 //config:config FEATURE_DU_DEFAULT_BLOCKSIZE_1K
 //config:	bool "Use a default blocksize of 1024 bytes (1K)"
 //config:	default y
 //config:	depends on DU
 //config:	help
-//config:	  Use a blocksize of (1K) instead of the default 512b.
+//config:	Use a blocksize of (1K) instead of the default 512b.
 
 //applet:IF_DU(APPLET(du, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/echo.c

@@ -22,7 +22,7 @@
 //config:	bool "echo (basic SuSv3 version taking no options)"
 //config:	default y
 //config:	help
-//config:	  echo is used to print a specified string to stdout.
+//config:	echo is used to print a specified string to stdout.
 //config:
 //config:# this entry also appears in shell/Config.in, next to the echo builtin
 //config:config FEATURE_FANCY_ECHO

coreutils/env.c

@@ -27,9 +27,9 @@
 //config:	bool "env (3.8 kb)"
 //config:	default y
 //config:	help
-//config:	  env is used to set an environment variable and run
+//config:	env is used to set an environment variable and run
-//config:	  a command; without options it displays the current
+//config:	a command; without options it displays the current
-//config:	  environment.
+//config:	environment.
 //config:
 //config:config FEATURE_ENV_LONG_OPTIONS
 //config:	bool "Enable long options"

coreutils/expand.c

@@ -24,7 +24,7 @@
 //config:	bool "expand (5.8 kb)"
 //config:	default y
 //config:	help
-//config:	  By default, convert all tabs to spaces.
+//config:	By default, convert all tabs to spaces.
 //config:
 //config:config FEATURE_EXPAND_LONG_OPTIONS
 //config:	bool "Enable long options"
@@ -35,7 +35,7 @@
 //config:	bool "unexpand (6 kb)"
 //config:	default y
 //config:	help
-//config:	  By default, convert only leading sequences of blanks to tabs.
+//config:	By default, convert only leading sequences of blanks to tabs.
 //config:
 //config:config FEATURE_UNEXPAND_LONG_OPTIONS
 //config:	bool "Enable long options"

coreutils/expr.c

@@ -26,17 +26,17 @@
 //config:	bool "expr (6.1 kb)"
 //config:	default y
 //config:	help
-//config:	  expr is used to calculate numbers and print the result
+//config:	expr is used to calculate numbers and print the result
-//config:	  to standard output.
+//config:	to standard output.
 //config:
 //config:config EXPR_MATH_SUPPORT_64
 //config:	bool "Extend Posix numbers support to 64 bit"
 //config:	default y
 //config:	depends on EXPR
 //config:	help
-//config:	  Enable 64-bit math support in the expr applet. This will make
+//config:	Enable 64-bit math support in the expr applet. This will make
-//config:	  the applet slightly larger, but will allow computation with very
+//config:	the applet slightly larger, but will allow computation with very
-//config:	  large numbers.
+//config:	large numbers.
 
 //applet:IF_EXPR(APPLET(expr, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/factor.c

@@ -7,7 +7,7 @@
 //config:	bool "factor (2.6 kb)"
 //config:	default y
 //config:	help
-//config:	  factor factorizes integers
+//config:	factor factorizes integers
 
 //applet:IF_FACTOR(APPLET(factor, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/false.c

@@ -10,7 +10,7 @@
 //config:	bool "false (tiny)"
 //config:	default y
 //config:	help
-//config:	  false returns an exit code of FALSE (1).
+//config:	false returns an exit code of FALSE (1).
 
 //applet:IF_FALSE(APPLET_NOFORK(false, false, BB_DIR_BIN, BB_SUID_DROP, false))
 

coreutils/fold.c

@@ -13,7 +13,7 @@
 //config:	bool "fold (4.6 kb)"
 //config:	default y
 //config:	help
-//config:	  Wrap text to fit a specific width.
+//config:	Wrap text to fit a specific width.
 
 //applet:IF_FOLD(APPLET_NOEXEC(fold, fold, BB_DIR_USR_BIN, BB_SUID_DROP, fold))
 

coreutils/fsync.c

@@ -10,7 +10,7 @@
 //config:	bool "fsync (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  fsync is used to flush file-related cached blocks to disk.
+//config:	fsync is used to flush file-related cached blocks to disk.
 
 //applet:IF_FSYNC(APPLET_NOFORK(fsync, fsync, BB_DIR_BIN, BB_SUID_DROP, fsync))
 

coreutils/head.c

@@ -10,8 +10,8 @@
 //config:	bool "head (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  head is used to print the first specified number of lines
+//config:	head is used to print the first specified number of lines
-//config:	  from files.
+//config:	from files.
 //config:
 //config:config FEATURE_FANCY_HEAD
 //config:	bool "Enable -c, -q, and -v"

coreutils/hostid.c

@@ -10,8 +10,8 @@
 //config:	bool "hostid (247 bytes)"
 //config:	default y
 //config:	help
-//config:	  hostid prints the numeric identifier (in hexadecimal) for
+//config:	hostid prints the numeric identifier (in hexadecimal) for
-//config:	  the current host.
+//config:	the current host.
 
 //applet:IF_HOSTID(APPLET_NOFORK(hostid, hostid, BB_DIR_USR_BIN, BB_SUID_DROP, hostid))
 

coreutils/id.c

@@ -16,13 +16,13 @@
 //config:	bool "id (6.7 kb)"
 //config:	default y
 //config:	help
-//config:	  id displays the current user and group ID names.
+//config:	id displays the current user and group ID names.
 //config:
 //config:config GROUPS
 //config:	bool "groups (6.5 kb)"
 //config:	default y
 //config:	help
-//config:	  Print the group names associated with current user id.
+//config:	Print the group names associated with current user id.
 
 //applet:IF_GROUPS(APPLET_NOEXEC(groups, id, BB_DIR_USR_BIN, BB_SUID_DROP, groups))
 //applet:IF_ID(    APPLET_NOEXEC(id,     id, BB_DIR_USR_BIN, BB_SUID_DROP, id    ))

coreutils/install.c

@@ -9,7 +9,7 @@
 //config:	bool "install (12 kb)"
 //config:	default y
 //config:	help
-//config:	  Copy files and set attributes.
+//config:	Copy files and set attributes.
 //config:
 //config:config FEATURE_INSTALL_LONG_OPTIONS
 //config:	bool "Enable long options"

coreutils/link.c

@@ -9,7 +9,7 @@
 //config:	bool "link (3.1 kb)"
 //config:	default y
 //config:	help
-//config:	  link creates hard links between files.
+//config:	link creates hard links between files.
 
 //applet:IF_LINK(APPLET_NOFORK(link, link, BB_DIR_BIN, BB_SUID_DROP, link))
 

coreutils/ln.c

@@ -10,7 +10,7 @@
 //config:	bool "ln (4.5 kb)"
 //config:	default y
 //config:	help
-//config:	  ln is used to create hard or soft links between files.
+//config:	ln is used to create hard or soft links between files.
 
 //applet:IF_LN(APPLET_NOEXEC(ln, ln, BB_DIR_BIN, BB_SUID_DROP, ln))
 

coreutils/logname.c

@@ -19,7 +19,7 @@
 //config:	bool "logname (894 bytes)"
 //config:	default y
 //config:	help
-//config:	  logname is used to print the current user's login name.
+//config:	logname is used to print the current user's login name.
 
 //applet:IF_LOGNAME(APPLET_NOFORK(logname, logname, BB_DIR_USR_BIN, BB_SUID_DROP, logname))
 

coreutils/ls.c

@@ -31,7 +31,7 @@
 //config:	bool "ls (14 kb)"
 //config:	default y
 //config:	help
-//config:	  ls is used to list the contents of directories.
+//config:	ls is used to list the contents of directories.
 //config:
 //config:config FEATURE_LS_FILETYPES
 //config:	bool "Enable filetyping options (-p and -F)"
@@ -58,39 +58,39 @@
 //config:	default y
 //config:	depends on LS
 //config:	help
-//config:	  Allow ls to sort file names alphabetically.
+//config:	Allow ls to sort file names alphabetically.
 //config:
 //config:config FEATURE_LS_TIMESTAMPS
 //config:	bool "Show file timestamps"
 //config:	default y
 //config:	depends on LS
 //config:	help
-//config:	  Allow ls to display timestamps for files.
+//config:	Allow ls to display timestamps for files.
 //config:
 //config:config FEATURE_LS_USERNAME
 //config:	bool "Show username/groupnames"
 //config:	default y
 //config:	depends on LS
 //config:	help
-//config:	  Allow ls to display username/groupname for files.
+//config:	Allow ls to display username/groupname for files.
 //config:
 //config:config FEATURE_LS_COLOR
 //config:	bool "Allow use of color to identify file types"
 //config:	default y
 //config:	depends on LS && LONG_OPTS
 //config:	help
-//config:	  This enables the --color option to ls.
+//config:	This enables the --color option to ls.
 //config:
 //config:config FEATURE_LS_COLOR_IS_DEFAULT
 //config:	bool "Produce colored ls output by default"
 //config:	default y
 //config:	depends on FEATURE_LS_COLOR
 //config:	help
-//config:	  Saying yes here will turn coloring on by default,
+//config:	Saying yes here will turn coloring on by default,
-//config:	  even if no "--color" option is given to the ls command.
+//config:	even if no "--color" option is given to the ls command.
-//config:	  This is not recommended, since the colors are not
+//config:	This is not recommended, since the colors are not
-//config:	  configurable, and the output may not be legible on
+//config:	configurable, and the output may not be legible on
-//config:	  many output screens.
+//config:	many output screens.
 
 //applet:IF_LS(APPLET_NOEXEC(ls, ls, BB_DIR_BIN, BB_SUID_DROP, ls))
 

coreutils/md5_sha1_sum.c

@@ -9,31 +9,31 @@
 //config:	bool "md5sum (6.8 kb)"
 //config:	default y
 //config:	help
-//config:	  md5sum is used to print or check MD5 checksums.
+//config:	md5sum is used to print or check MD5 checksums.
 //config:
 //config:config SHA1SUM
 //config:	bool "sha1sum (6 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA1 message digest
+//config:	Compute and check SHA1 message digest
 //config:
 //config:config SHA256SUM
 //config:	bool "sha256sum (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA256 message digest
+//config:	Compute and check SHA256 message digest
 //config:
 //config:config SHA512SUM
 //config:	bool "sha512sum (7.6 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA512 message digest
+//config:	Compute and check SHA512 message digest
 //config:
 //config:config SHA3SUM
 //config:	bool "sha3sum (6.3 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA3 message digest
+//config:	Compute and check SHA3 message digest
 //config:
 //config:comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum"
 //config:	depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
@@ -43,9 +43,9 @@
 //config:	default y
 //config:	depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
 //config:	help
-//config:	  Enabling the -c options allows files to be checked
+//config:	Enabling the -c options allows files to be checked
-//config:	  against pre-calculated hash values.
+//config:	against pre-calculated hash values.
-//config:	  -s and -w are useful options when verifying checksums.
+//config:	-s and -w are useful options when verifying checksums.
 
 //applet:IF_MD5SUM(APPLET_NOEXEC(md5sum, md5_sha1_sum, BB_DIR_USR_BIN, BB_SUID_DROP, md5sum))
 //applet:IF_SHA1SUM(APPLET_NOEXEC(sha1sum, md5_sha1_sum, BB_DIR_USR_BIN, BB_SUID_DROP, sha1sum))

coreutils/mkdir.c

@@ -17,7 +17,7 @@
 //config:	bool "mkdir (4.4 kb)"
 //config:	default y
 //config:	help
-//config:	  mkdir is used to create directories with the specified names.
+//config:	mkdir is used to create directories with the specified names.
 //config:
 //config:config FEATURE_MKDIR_LONG_OPTIONS
 //config:	bool "Enable long options"

coreutils/mkfifo.c

@@ -10,8 +10,8 @@
 //config:	bool "mkfifo (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  mkfifo is used to create FIFOs (named pipes).
+//config:	mkfifo is used to create FIFOs (named pipes).
-//config:	  The 'mknod' program can also create FIFOs.
+//config:	The 'mknod' program can also create FIFOs.
 
 //applet:IF_MKFIFO(APPLET_NOEXEC(mkfifo, mkfifo, BB_DIR_USR_BIN, BB_SUID_DROP, mkfifo))
 

coreutils/mknod.c

@@ -10,8 +10,8 @@
 //config:	bool "mknod (4 kb)"
 //config:	default y
 //config:	help
-//config:	  mknod is used to create FIFOs or block/character special
+//config:	mknod is used to create FIFOs or block/character special
-//config:	  files with the specified names.
+//config:	files with the specified names.
 
 //applet:IF_MKNOD(APPLET_NOEXEC(mknod, mknod, BB_DIR_BIN, BB_SUID_DROP, mknod))
 

coreutils/mktemp.c

@@ -34,7 +34,7 @@
 //config:	bool "mktemp (4 kb)"
 //config:	default y
 //config:	help
-//config:	  mktemp is used to create unique temporary files
+//config:	mktemp is used to create unique temporary files
 
 //applet:IF_MKTEMP(APPLET(mktemp, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/mv.c

@@ -15,7 +15,7 @@
 //config:	bool "mv (9.8 kb)"
 //config:	default y
 //config:	help
-//config:	  mv is used to move or rename files or directories.
+//config:	mv is used to move or rename files or directories.
 //config:
 //config:config FEATURE_MV_LONG_OPTIONS
 //config:	bool "Enable long options"

coreutils/nice.c

@@ -10,7 +10,7 @@
 //config:	bool "nice (1.8 kb)"
 //config:	default y
 //config:	help
-//config:	  nice runs a program with modified scheduling priority.
+//config:	nice runs a program with modified scheduling priority.
 
 //applet:IF_NICE(APPLET(nice, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/nl.c

@@ -8,7 +8,7 @@
 //config:	bool "nl (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  nl is used to number lines of files.
+//config:	nl is used to number lines of files.
 
 //applet:IF_NL(APPLET(nl, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/nohup.c

@@ -13,7 +13,7 @@
 //config:	bool "nohup (2 kb)"
 //config:	default y
 //config:	help
-//config:	  run a command immune to hangups, with output to a non-tty.
+//config:	run a command immune to hangups, with output to a non-tty.
 
 //applet:IF_NOHUP(APPLET(nohup, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/nproc.c

@@ -7,7 +7,7 @@
 //config:	bool "nproc (248 bytes)"
 //config:	default y
 //config:	help
-//config:	  Print number of CPUs
+//config:	Print number of CPUs
 
 //applet:IF_NPROC(APPLET(nproc, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/od.c

@@ -14,7 +14,7 @@
 //config:	bool "od (11 kb)"
 //config:	default y
 //config:	help
-//config:	  od is used to dump binary files in octal and other formats.
+//config:	od is used to dump binary files in octal and other formats.
 
 //applet:IF_OD(APPLET(od, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/paste.c

@@ -10,8 +10,8 @@
 //config:	bool "paste (4.5 kb)"
 //config:	default y
 //config:	help
-//config:	  paste is used to paste lines of different files together
+//config:	paste is used to paste lines of different files together
-//config:	  and write the result to stdout
+//config:	and write the result to stdout
 
 //applet:IF_PASTE(APPLET_NOEXEC(paste, paste, BB_DIR_USR_BIN, BB_SUID_DROP, paste))
 

coreutils/printenv.c

@@ -11,7 +11,7 @@
 //config:	bool "printenv (1 kb)"
 //config:	default y
 //config:	help
-//config:	  printenv is used to print all or part of environment.
+//config:	printenv is used to print all or part of environment.
 
 //applet:IF_PRINTENV(APPLET_NOFORK(printenv, printenv, BB_DIR_BIN, BB_SUID_DROP, printenv))
 

coreutils/printf.c

@@ -42,8 +42,8 @@
 //config:	bool "printf (3.3 kb)"
 //config:	default y
 //config:	help
-//config:	  printf is used to format and print specified strings.
+//config:	printf is used to format and print specified strings.
-//config:	  It's similar to `echo' except it has more options.
+//config:	It's similar to `echo' except it has more options.
 
 //applet:IF_PRINTF(APPLET_NOFORK(printf, printf, BB_DIR_USR_BIN, BB_SUID_DROP, printf))
 

coreutils/pwd.c

@@ -10,7 +10,7 @@
 //config:	bool "pwd (3.4 kb)"
 //config:	default y
 //config:	help
-//config:	  pwd is used to print the current directory.
+//config:	pwd is used to print the current directory.
 
 //applet:IF_PWD(APPLET_NOFORK(pwd, pwd, BB_DIR_BIN, BB_SUID_DROP, pwd))
 

coreutils/readlink.c

@@ -10,15 +10,15 @@
 //config:	bool "readlink (3.6 kb)"
 //config:	default y
 //config:	help
-//config:	  This program reads a symbolic link and returns the name
+//config:	This program reads a symbolic link and returns the name
-//config:	  of the file it points to
+//config:	of the file it points to
 //config:
 //config:config FEATURE_READLINK_FOLLOW
 //config:	bool "Enable canonicalization by following all symlinks (-f)"
 //config:	default y
 //config:	depends on READLINK
 //config:	help
-//config:	  Enable the readlink option (-f).
+//config:	Enable the readlink option (-f).
 
 //applet:IF_READLINK(APPLET(readlink, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/realpath.c

@@ -10,8 +10,8 @@
 //config:	bool "realpath (1.1 kb)"
 //config:	default y
 //config:	help
-//config:	  Return the canonicalized absolute pathname.
+//config:	Return the canonicalized absolute pathname.
-//config:	  This isn't provided by GNU shellutils, but where else does it belong.
+//config:	This isn't provided by GNU shellutils, but where else does it belong.
 
 //applet:IF_REALPATH(APPLET(realpath, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/rm.c

@@ -14,7 +14,7 @@
 //config:	bool "rm (4.9 kb)"
 //config:	default y
 //config:	help
-//config:	  rm is used to remove files or directories.
+//config:	rm is used to remove files or directories.
 
 //applet:IF_RM(APPLET_NOFORK(rm, rm, BB_DIR_BIN, BB_SUID_DROP, rm))
 

coreutils/rmdir.c

@@ -10,15 +10,15 @@
 //config:	bool "rmdir (3.4 kb)"
 //config:	default y
 //config:	help
-//config:	  rmdir is used to remove empty directories.
+//config:	rmdir is used to remove empty directories.
 //config:
 //config:config FEATURE_RMDIR_LONG_OPTIONS
 //config:	bool "Enable long options"
 //config:	default y
 //config:	depends on RMDIR && LONG_OPTS
 //config:	help
-//config:	  Support long options for the rmdir applet, including
+//config:	Support long options for the rmdir applet, including
-//config:	  --ignore-fail-on-non-empty for compatibility with GNU rmdir.
+//config:	--ignore-fail-on-non-empty for compatibility with GNU rmdir.
 
 //applet:IF_RMDIR(APPLET_NOFORK(rmdir, rmdir, BB_DIR_BIN, BB_SUID_DROP, rmdir))
 

coreutils/seq.c

@@ -10,7 +10,7 @@
 //config:	bool "seq (3.6 kb)"
 //config:	default y
 //config:	help
-//config:	  print a sequence of numbers
+//config:	print a sequence of numbers
 
 //applet:IF_SEQ(APPLET_NOFORK(seq, seq, BB_DIR_USR_BIN, BB_SUID_DROP, seq))
 

coreutils/shred.c

@@ -8,7 +8,7 @@
 //config:	bool "shred (5 kb)"
 //config:	default y
 //config:	help
-//config:	  Overwrite a file to hide its contents, and optionally delete it
+//config:	Overwrite a file to hide its contents, and optionally delete it
 
 //applet:IF_SHRED(APPLET(shred, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/shuf.c

@@ -11,7 +11,7 @@
 //config:	bool "shuf (5.4 kb)"
 //config:	default y
 //config:	help
-//config:	  Generate random permutations
+//config:	Generate random permutations
 
 //kbuild:lib-$(CONFIG_SHUF) += shuf.o
 //applet:IF_SHUF(APPLET_NOEXEC(shuf, shuf, BB_DIR_USR_BIN, BB_SUID_DROP, shuf))

coreutils/sleep.c

@@ -16,29 +16,29 @@
 //config:	bool "sleep (1.7 kb)"
 //config:	default y
 //config:	help
-//config:	  sleep is used to pause for a specified number of seconds.
+//config:	sleep is used to pause for a specified number of seconds.
-//config:	  It comes in 3 versions:
+//config:	It comes in 3 versions:
-//config:	  - small: takes one integer parameter
+//config:	- small: takes one integer parameter
-//config:	  - fancy: takes multiple integer arguments with suffixes:
+//config:	- fancy: takes multiple integer arguments with suffixes:
-//config:	    sleep 1d 2h 3m 15s
+//config:		sleep 1d 2h 3m 15s
-//config:	  - fancy with fractional numbers:
+//config:	- fancy with fractional numbers:
-//config:	    sleep 2.3s 4.5h sleeps for 16202.3 seconds
+//config:		sleep 2.3s 4.5h sleeps for 16202.3 seconds
-//config:	  Last one is "the most compatible" with coreutils sleep,
+//config:	Last one is "the most compatible" with coreutils sleep,
-//config:	  but it adds around 1k of code.
+//config:	but it adds around 1k of code.
 //config:
 //config:config FEATURE_FANCY_SLEEP
 //config:	bool "Enable multiple arguments and s/m/h/d suffixes"
 //config:	default y
 //config:	depends on SLEEP
 //config:	help
-//config:	  Allow sleep to pause for specified minutes, hours, and days.
+//config:	Allow sleep to pause for specified minutes, hours, and days.
 //config:
 //config:config FEATURE_FLOAT_SLEEP
 //config:	bool "Enable fractional arguments"
 //config:	default y
 //config:	depends on FEATURE_FANCY_SLEEP
 //config:	help
-//config:	  Allow for fractional numeric parameters.
+//config:	Allow for fractional numeric parameters.
 
 /* Do not make this applet NOFORK. It breaks ^C-ing of pauses in shells */
 //applet:IF_SLEEP(APPLET(sleep, BB_DIR_BIN, BB_SUID_DROP))

coreutils/sort.c

@@ -15,19 +15,19 @@
 //config:	bool "sort (7.4 kb)"
 //config:	default y
 //config:	help
-//config:	  sort is used to sort lines of text in specified files.
+//config:	sort is used to sort lines of text in specified files.
 //config:
 //config:config FEATURE_SORT_BIG
 //config:	bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)"
 //config:	default y
 //config:	depends on SORT
 //config:	help
-//config:	  Without this, sort only supports -r, -u, and an integer version
+//config:	Without this, sort only supports -r, -u, and an integer version
-//config:	  of -n. Selecting this adds sort keys, floating point support, and
+//config:	of -n. Selecting this adds sort keys, floating point support, and
-//config:	  more. This adds a little over 3k to a nonstatic build on x86.
+//config:	more. This adds a little over 3k to a nonstatic build on x86.
 //config:
-//config:	  The SuSv3 sort standard is available at:
+//config:	The SuSv3 sort standard is available at:
-//config:	  http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+//config:	http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
 
 //applet:IF_SORT(APPLET_NOEXEC(sort, sort, BB_DIR_USR_BIN, BB_SUID_DROP, sort))
 

coreutils/split.c

@@ -9,16 +9,16 @@
 //config:	bool "split (5.4 kb)"
 //config:	default y
 //config:	help
-//config:	  Split a file into pieces.
+//config:	Split a file into pieces.
 //config:
 //config:config FEATURE_SPLIT_FANCY
 //config:	bool "Fancy extensions"
 //config:	default y
 //config:	depends on SPLIT
 //config:	help
-//config:	  Add support for features not required by SUSv3.
+//config:	Add support for features not required by SUSv3.
-//config:	  Supports additional suffixes 'b' for 512 bytes,
+//config:	Supports additional suffixes 'b' for 512 bytes,
-//config:	  'g' for 1GiB for the -b option.
+//config:	'g' for 1GiB for the -b option.
 
 //applet:IF_SPLIT(APPLET(split, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/stat.c

@@ -16,16 +16,16 @@
 //config:	bool "stat (10 kb)"
 //config:	default y
 //config:	help
-//config:	  display file or filesystem status.
+//config:	display file or filesystem status.
 //config:
 //config:config FEATURE_STAT_FORMAT
 //config:	bool "Enable custom formats (-c)"
 //config:	default y
 //config:	depends on STAT
 //config:	help
-//config:	  Without this, stat will not support the '-c format' option where
+//config:	Without this, stat will not support the '-c format' option where
-//config:	  users can pass a custom format string for output. This adds about
+//config:	users can pass a custom format string for output. This adds about
-//config:	  7k to a nonstatic build on amd64.
+//config:	7k to a nonstatic build on amd64.
 //config:
 //config:config FEATURE_STAT_FILESYSTEM
 //config:	bool "Enable display of filesystem status (-f)"
@@ -33,8 +33,8 @@
 //config:	depends on STAT
 //config:	select PLATFORM_LINUX # statfs()
 //config:	help
-//config:	  Without this, stat will not support the '-f' option to display
+//config:	Without this, stat will not support the '-f' option to display
-//config:	  information about filesystem status.
+//config:	information about filesystem status.
 
 //applet:IF_STAT(APPLET(stat, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/stty.c

@@ -23,7 +23,7 @@
 //config:	bool "stty (8.6 kb)"
 //config:	default y
 //config:	help
-//config:	  stty is used to change and print terminal line settings.
+//config:	stty is used to change and print terminal line settings.
 
 //applet:IF_STTY(APPLET(stty, BB_DIR_BIN, BB_SUID_DROP))
 

coreutils/sum.c

@@ -16,7 +16,7 @@
 //config:	bool "sum (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  checksum and count the blocks in a file
+//config:	checksum and count the blocks in a file
 
 //applet:IF_SUM(APPLET(sum, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/sync.c

@@ -11,14 +11,14 @@
 //config:	bool "sync (769 bytes)"
 //config:	default y
 //config:	help
-//config:	  sync is used to flush filesystem buffers.
+//config:	sync is used to flush filesystem buffers.
 //config:config FEATURE_SYNC_FANCY
 //config:	bool "Enable -d and -f flags (requires syncfs(2) in libc)"
 //config:	default y
 //config:	depends on SYNC
 //config:	help
-//config:	  sync -d FILE... executes fdatasync() on each FILE.
+//config:	sync -d FILE... executes fdatasync() on each FILE.
-//config:	  sync -f FILE... executes syncfs() on each FILE.
+//config:	sync -f FILE... executes syncfs() on each FILE.
 
 //applet:IF_SYNC(APPLET_NOFORK(sync, sync, BB_DIR_BIN, BB_SUID_DROP, sync))
 

coreutils/tac.c

@@ -16,7 +16,7 @@
 //config:	bool "tac (4.1 kb)"
 //config:	default y
 //config:	help
-//config:	  tac is used to concatenate and print files in reverse.
+//config:	tac is used to concatenate and print files in reverse.
 
 //applet:IF_TAC(APPLET_NOEXEC(tac, tac, BB_DIR_USR_BIN, BB_SUID_DROP, tac))
 

coreutils/tail.c

@@ -22,20 +22,20 @@
 //config:	bool "tail (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  tail is used to print the last specified number of lines
+//config:	tail is used to print the last specified number of lines
-//config:	  from files.
+//config:	from files.
 //config:
 //config:config FEATURE_FANCY_TAIL
 //config:	bool "Enable -q, -s, -v, and -F options"
 //config:	default y
 //config:	depends on TAIL
 //config:	help
-//config:	  These options are provided by GNU tail, but
+//config:	These options are provided by GNU tail, but
-//config:	  are not specific in the SUSv3 standard:
+//config:	are not specified in the SUSv3 standard:
-//config:	    -q      Never output headers giving file names
+//config:		-q      Never output headers giving file names
-//config:	    -s SEC  Wait SEC seconds between reads with -f
+//config:		-s SEC  Wait SEC seconds between reads with -f
-//config:	    -v      Always output headers giving file names
+//config:		-v      Always output headers giving file names
-//config:	    -F      Same as -f, but keep retrying
+//config:		-F      Same as -f, but keep retrying
 
 //applet:IF_TAIL(APPLET(tail, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/tee.c

@@ -10,15 +10,15 @@
 //config:	bool "tee (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  tee is used to read from standard input and write
+//config:	tee is used to read from standard input and write
-//config:	  to standard output and files.
+//config:	to standard output and files.
 //config:
 //config:config FEATURE_TEE_USE_BLOCK_IO
 //config:	bool "Enable block I/O (larger/faster) instead of byte I/O"
 //config:	default y
 //config:	depends on TEE
 //config:	help
-//config:	  Enable this option for a faster tee, at expense of size.
+//config:	Enable this option for a faster tee, at expense of size.
 
 //applet:IF_TEE(APPLET(tee, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/test.c

@@ -23,28 +23,28 @@
 //config:	bool "test (3.6 kb)"
 //config:	default y
 //config:	help
-//config:	  test is used to check file types and compare values,
+//config:	test is used to check file types and compare values,
-//config:	  returning an appropriate exit code. The bash shell
+//config:	returning an appropriate exit code. The bash shell
-//config:	  has test built in, ash can build it in optionally.
+//config:	has test built in, ash can build it in optionally.
 //config:
 //config:config TEST1
 //config:	bool "test as ["
 //config:	default y
 //config:	help
-//config:	  Provide test command in the "[ EXPR ]" form
+//config:	Provide test command in the "[ EXPR ]" form
 //config:
 //config:config TEST2
 //config:	bool "test as [["
 //config:	default y
 //config:	help
-//config:	  Provide test command in the "[[ EXPR ]]" form
+//config:	Provide test command in the "[[ EXPR ]]" form
 //config:
 //config:config FEATURE_TEST_64
 //config:	bool "Extend test to 64 bit"
 //config:	default y
 //config:	depends on TEST || TEST1 || TEST2 || ASH_TEST || HUSH_TEST
 //config:	help
-//config:	  Enable 64-bit support in test.
+//config:	Enable 64-bit support in test.
 
 //applet:IF_TEST(APPLET_NOFORK(test, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
 //applet:IF_TEST1(APPLET_NOFORK([,   test, BB_DIR_USR_BIN, BB_SUID_DROP, test))

coreutils/timeout.c

@@ -31,8 +31,8 @@
 //config:	bool "timeout (5.5 kb)"
 //config:	default y
 //config:	help
-//config:	  Runs a program and watches it. If it does not terminate in
+//config:	Runs a program and watches it. If it does not terminate in
-//config:	  specified number of seconds, it is sent a signal.
+//config:	specified number of seconds, it is sent a signal.
 
 //applet:IF_TIMEOUT(APPLET(timeout, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/touch.c

@@ -16,23 +16,23 @@
 //config:	bool "touch (5.8 kb)"
 //config:	default y
 //config:	help
-//config:	  touch is used to create or change the access and/or
+//config:	touch is used to create or change the access and/or
-//config:	  modification timestamp of specified files.
+//config:	modification timestamp of specified files.
 //config:
 //config:config FEATURE_TOUCH_NODEREF
 //config:	bool "Add support for -h"
 //config:	default y
 //config:	depends on TOUCH
 //config:	help
-//config:	  Enable touch to have the -h option.
+//config:	Enable touch to have the -h option.
-//config:	  This requires libc support for lutimes() function.
+//config:	This requires libc support for lutimes() function.
 //config:
 //config:config FEATURE_TOUCH_SUSV3
 //config:	bool "Add support for SUSV3 features (-d -t -r)"
 //config:	default y
 //config:	depends on TOUCH
 //config:	help
-//config:	  Enable touch to use a reference file or a given date/time argument.
+//config:	Enable touch to use a reference file or a given date/time argument.
 
 //applet:IF_TOUCH(APPLET_NOFORK(touch, touch, BB_DIR_BIN, BB_SUID_DROP, touch))
 

coreutils/tr.c

@@ -22,27 +22,27 @@
 //config:	bool "tr (5.5 kb)"
 //config:	default y
 //config:	help
-//config:	  tr is used to squeeze, and/or delete characters from standard
+//config:	tr is used to squeeze, and/or delete characters from standard
-//config:	  input, writing to standard output.
+//config:	input, writing to standard output.
 //config:
 //config:config FEATURE_TR_CLASSES
 //config:	bool "Enable character classes (such as [:upper:])"
 //config:	default y
 //config:	depends on TR
 //config:	help
-//config:	  Enable character classes, enabling commands such as:
+//config:	Enable character classes, enabling commands such as:
-//config:	  tr [:upper:] [:lower:] to convert input into lowercase.
+//config:	tr [:upper:] [:lower:] to convert input into lowercase.
 //config:
 //config:config FEATURE_TR_EQUIV
 //config:	bool "Enable equivalence classes"
 //config:	default y
 //config:	depends on TR
 //config:	help
-//config:	  Enable equivalence classes, which essentially add the enclosed
+//config:	Enable equivalence classes, which essentially add the enclosed
-//config:	  character to the current set. For instance, tr [=a=] xyz would
+//config:	character to the current set. For instance, tr [=a=] xyz would
-//config:	  replace all instances of 'a' with 'xyz'. This option is mainly
+//config:	replace all instances of 'a' with 'xyz'. This option is mainly
-//config:	  useful for cases when no other way of expressing a character
+//config:	useful for cases when no other way of expressing a character
-//config:	  is possible.
+//config:	is possible.
 
 //applet:IF_TR(APPLET(tr, BB_DIR_USR_BIN, BB_SUID_DROP))
 

coreutils/true.c

@@ -10,7 +10,7 @@
 //config:	bool "true (tiny)"
 //config:	default y
 //config:	help
-//config:	  true returns an exit code of TRUE (0).
+//config:	true returns an exit code of TRUE (0).
 
 //applet:IF_TRUE(APPLET_NOFORK(true, true, BB_DIR_BIN, BB_SUID_DROP, true))
 

coreutils/truncate.c

@@ -9,8 +9,8 @@
 //config:	bool "truncate (4.7 kb)"
 //config:	default y
 //config:	help
-//config:	  truncate truncates files to a given size. If a file does
+//config:	truncate truncates files to a given size. If a file does
-//config:	  not exist, it is created unless told otherwise.
+//config:	not exist, it is created unless told otherwise.
 
 //applet:IF_TRUNCATE(APPLET_NOFORK(truncate, truncate, BB_DIR_USR_BIN, BB_SUID_DROP, truncate))