Various tools are Linuxish and should thus only attempted to build on
Linux only. Some features are also Linux-only.
Also, libresolv is used on all GNU platforms, notably GNU/Hurd and
GNU/kfreeBSD.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Starting with linux kernel v5.4 squashfs has a more strict parameter
checking implemented. Unlike util-linux mount, busybox never supported
the sizelimit option but simply forwards it to the kernel.
Since v5.4 mounting will fail with
squashfs: Unknown parameter 'sizelimit'
Support the sizelimit parameter by setting it in the LOOP_SET_STATUS64
structure before handing it to the kernel.
While at it also add support for the offset option, which currently will
always be set to 0.
function old new delta
cut_out_ull_opt - 167 +167
singlemount 1230 1266 +36
set_loop 834 862 +28
losetup_main 479 483 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 235/0) Total: 235 bytes
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "autolooped" mount (mount [-oloop] IMAGE /DIR/DIR)
always creates AUTOCLEARed loopdevs, so that umounting
drops them (and this does not require any code in the
umount userspace).
This happens since circa linux-2.6.25:
commit 96c5865559cee0f9cbc5173f3c949f6ce3525581
Date: Wed Feb 6 01:36:27 2008 -0800
Subject: Allow auto-destruction of loop devices
IOW: in this case, umount does not have to use -d
to drop the loopdev.
The explicit loop mount (mount /dev/loopN /DIR/DIR)
does not do this. In this case, umount without -d
should not drop loopdev.
Unfortunately, bbox umount currently always implies -d,
this probably needs fixing.
function old new delta
set_loop 537 597 +60
singlemount 1101 1138 +37
losetup_main 419 432 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 110/0) Total: 110 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"losetup -d" was not complaining that LOOPDEV is missing.
"losetup -a" was listing only up to /dev/loop9.
"losetup -f" looped forever if llop0 was taken, and never tried
anything after /dev/loop9.
"-o" with other options (say, -r) had no effect.
function old new delta
losetup_main 376 419 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Added -a support. Also made sure -f works as follows:
losetup [-r] [-o offset] {-f|loopdev} file
Removed support for 'losetup -r' with no arguments.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This change retains "or later" state! No licensing _changes_ here,
only form is adjusted (article, space between "GPL" and "v2" and so on).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixed some goofs in help text
function old new delta
modprobe_main 494 653 +159
packed_usage 27129 27145 +16
insmod_main 98 95 -3
Signed-off-by: Pascal Bellard <pascal.bellard@ads-lu.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is impossible to formulate sane ABI based on
size of ulong because it can be 32-bit or 64-bit.
Basically it means that you cannot portably use
more that 32 option chars in one call anyway...
Make it explicit.
messages, C) can show the current association (if any) when called
with only one argument. Update the documentation a lot too.
Remind me to add a test suite for this thing. I think I've figured out
how to handle root-only testsuites...
things down a bit, fixed a number of funky corner cases, added support for
several new features (things like mount --move, mount --bind, lazy unounts,
automatic detection of loop mounts, and so on). Probably broke several
other things, but it's fixable. (Bang on it, tell me what doesn't work for
you...)
Note: you no longer need to say "-o loop". It does that for you when
necessary.
Still need to add "user mount" support, which involves making mount suid. Not
too hard to do under the new infrastructure, just haven't done it yet...
The previous code had the following notes, that belong in the version
control comments:
- * 3/21/1999 Charles P. Wright <cpwright@cpwright.com>
- * searches through fstab when -a is passed
- * will try mounting stuff with all fses when passed -t auto
- *
- * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab.
- *
- * 1999-10-07 Erik Andersen <andersen@codepoet.org>.
- * Rewrite of a lot of code. Removed mtab usage (I plan on
- * putting it back as a compile-time option some time),
- * major adjustments to option parsing, and some serious
- * dieting all around.
- *
- * 1999-11-06 mtab support is back - andersee
- *
- * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's
- * mount to add loop support.
- *
- * 2000-04-30 Dave Cinege <dcinege@psychosis.com>
- * Rewrote fstab while loop and lower mount section. Can now do
- * single mounts from fstab. Can override fstab options for single
- * mount. Common mount_one call for single mounts and 'all'. Fixed
- * mtab updating and stale entries. Removed 'remount' default.
- *
When using "losetup" the device is always setup as Read-Only.
(I have only tested with the -o flag, but looking at the code the
problem seems general)
The problem is the "opt" variable in "losetup.c" that is reused in
the "set_loop()" call. Clear it before the call and everything is OK;
opt = 0; /* <-------- added line */
if (delete)
return del_loop (argv[optind]) ? EXIT_SUCCESS : EXIT_FAILURE;
else
return set_loop (argv[optind], argv[optind + 1], offset, &opt)
? EXIT_FAILURE : EXIT_SUCCESS;
}
Best Regards,
Lars Ekman