The paragraph motion commands '{' and '}' should accept a count.
function old new delta
do_cmd 5054 5071 +17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 17/0) Total: 17 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The motion that determines the range of a change, delete, yank
or shift operation can have its own count. Thus the commands
'5dd' and 'd5d' are equivalent: both delete 5 lines.
When the command itself also has a count the two values are
multiplied. Thus the command '2d3w' deletes 6 words and '2D3G'
deletes from the current line to line 6.
(When dealing with structured data it might make sense to think in
units of 3 words so '2d3w' is deleting 2 such units. It doesn't
seem quite as sensible to express 'delete from current line to line 6'
as '2D3G' but vi permits it.)
function old new delta
get_motion_char - 68 +68
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/0 up/down: 68/0) Total: 68 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add 'F', 'T' and '|' as commands that can be used to specify a
range for change/delete/yank operations.
function old new delta
.rodata 105129 105135 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 6/0) Total: 6 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
- Use a common routine to handle all commands to search for a
character in a line.
- When searching for the nth occurrence of a character don't move
the cursor if fewer than n occurrences are present.
- Add support for the 'T' command, search backwards for character
after next occurrence of given character.
function old new delta
do_cmd 4861 4805 -56
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-56) Total: -56 bytes
v2: Add parentheses to avoid searches continuing past end of line.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When the 'j'/'k' commands or up/down arrow keys are used to move
the cursor vertically 'vi' remembers the original cursor column
and positions the cursor there if possible. Also, if the '$'
command has been used to position the cursor at the end of a line
vertical movements keep the cursor at the end of the line.
Make BusyBox 'vi' do the same.
function old new delta
refresh 674 694 +20
do_cmd 4853 4861 +8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 28/0) Total: 28 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 'G' command with no target (meaning 'go to last line') should
position the cursor on the first visible character of the line, as
it already does in other cases.
The 'M' command should position the cursor on the first visible
character (as 'H' and 'L' already do).
function old new delta
do_cmd 4842 4853 +11
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 11/0) Total: 11 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the name of the file being written doesn't match the current
filename and the output file already exists vi should issue a
warning and not overwrite the file.
Because the test only compares the file names it's somewhat over-
protective. If the current file name is 'my_text' and the user tries
to save to './my_text' they'll be prevented from doing so.
function old new delta
colon 3092 3151 +59
.rodata 105118 105146 +28
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 87/0) Total: 87 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Vi places text affected by change/delete/yank operations into a
buffer. The contents of such buffers can be restored with the put
commands, 'p' or 'P'. These behave differently depending on whether
the buffer contains whole lines or partial lines. For whole lines
the text is copied into the file on the line before (P) or after
(p) the current line. For partial lines the text is copied before
or after the current cursor position.
Whether an operation results in whole or partial lines depends on
the command used.
BusyBox vi treats any buffer with a newline as though it contained
whole lines. This is incorrect. Deleting multiple words across
a line boundary results in a buffer with a newline but not having
whole lines.
Rework how buffers are handled to behave more like vi.
function old new delta
static.text_yank 79 99 +20
colon 3092 3097 +5
edit_file 885 887 +2
yank_delete 127 112 -15
.rodata 105139 105101 -38
find_range 514 467 -47
do_cmd 5088 4842 -246
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/4 up/down: 27/-346) Total: -319 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I was puzzled by code in find_range() which handles forward word
movement. It included a test to see if we're at the start of a
word. Since these are forward word movements surely we'd expect to
be at the start of a word? In fact, the test was intended to fix a
problem with changes to the last word in a file, as discussed in the
thread starting here:
http://lists.busybox.net/pipermail/busybox/2004-January/044552.html
The code can be simplified by testing directly for end of file instead
of indirectly for not being at the start of a word. Since trailing
whitespace is now handled in do_cmd() the code to back up off a newline
is no longer required.
function old new delta
find_range 619 514 -105
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-105) Total: -105 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 4b49422a0 (vi: fix changes to word at end of line. Closes
11796) fixed a problem where an operation on a word at the end of
a line followed by a line starting with whitespace incorrectly
joined the lines. However it also broke the case where operating
on multiple words across a line boundary *should* join the lines.
Fix this by detecting when trailing whitepace in a word operation
includes a newline. Whitespace beyond the newline is excluded
from consideration.
function old new delta
do_cmd 5083 5088 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 5/0) Total: 5 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Doing this the kernel will hibernate and resume successfully from a swap file.
Stop writing offset to /sys/power/resume, as this is not a parameter
the kernel takes from this input. (Change added by Sven Mueller)
function old new delta
resume_main 522 561 +39
.rodata 103175 103182 +7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 46/0) Total: 46 bytes
Signed-off-by: Jordi Pujol Palomer <jordipujolp@gmail.com>
Signed-off-by: Sven Mueller <sven.mueller72+busybox@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Discovered that the DHCP server on a TrendNet router (unknown model)
provides a zero-length option 12 (Host Name) in the DHCP ACK message. This
has the effect of causing udhcpc to drop the rest of the options, including
option 51 (IP Address Lease Time), 3 (Router), and 6 (Domain Name Server),
most importantly leaving the OpenWrt device with no default gateway.
The TrendNet behavior violates RFC 2132, which in Section 3.14 declares that
option 12 has a minimum length of 1 octet. It is perhaps not a cosmic coincidence
that I found this behavior on Pi Day.
This patch allows zero length options without bailing out, by simply skipping them.
function old new delta
udhcp_scan_options 183 172 -11
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix "busybox --help echo" and other special applets to still print
the help text.
function old new delta
run_applet_and_exit 732 761 +29
show_usage_if_dash_dash_help 70 78 +8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 37/0) Total: 37 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On certain corrupt gzip files, huft_build will set the error bit on
the result pointer. If afterwards abort_unzip is called huft_free
might run into a segmentation fault or an invalid pointer to
free(p).
In order to mitigate this, we check in huft_free if the error bit
is set and clear it before the linked list is freed.
Signed-off-by: Samuel Sapalski <samuel.sapalski@nokia.com>
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Disable 'echo' in the default config, run 'make baseline', then
re-enable 'echo' and run 'make bloatcheck':
function old new delta
.rodata 182521 182622 +101
packed_usage 33714 33792 +78
applet_main 3168 3176 +8
applet_names 2730 2735 +5
applet_suid 99 100 +1
applet_install_loc 198 199 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 6/0 up/down: 194/0) Total: 194 bytes
text data bss dec hex filename
955052 4195 1808 961055 eaa1f busybox_old
955153 4195 1808 961156 eaa84 busybox_unstripped
The Total bytes value doesn't equal the change in the size of the
binary. The packed_usage and applet_* items are in .rodata and
are counted twice. With this modified bloat-o-meter the size of
named items is deducted from .rodata:
function old new delta
packed_usage 33714 33792 +78
applet_main 3168 3176 +8
.rodata 105105 105113 +8
applet_names 2730 2735 +5
applet_suid 99 100 +1
applet_install_loc 198 199 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 6/0 up/down: 101/0) Total: 101 bytes
text data bss dec hex filename
955052 4195 1808 961055 eaa1f busybox_old
955153 4195 1808 961156 eaa84 busybox_unstripped
v2: Sections numbered less than 10 were always being omitted from
consideration because splitting "[ 1] .interp" leaves "1]" in
x[1] where the section name is expected. This wasn't a problem
for .rodata (numbered 15 in my testing) but let's fix it anyway.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reduces initial traffic to NTP servers when a lot of devices boot at once.
Log inspection tells me we agressively burst-poll servers about 5 times
at startup, even though we usually already update clock after second replies.
INITIAL_SAMPLES can probably be even lower, e.g. 2, but let's be conservative
when changing this stuff.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes bug where commands after the first noXXX command are ignored.
e.g. :set noic tabstop=4
While at it, stop recognizing "notabstop=NNN".
function old new delta
colon 2990 2965 -25
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
before:
Tiny RPN calculator. Operations:
+, -, *, /, %, ~, ^, |,
p - print top of the stack without popping
f - print entire stack
k - pop the value and set the precision
i - pop the value and set input radix
o - pop the value and set output radix
After:
Tiny RPN calculator. Operations:
Arithmetic: + - * / % ^
~ - divide with remainder
| - modular exponentiation
v - square root
p - print top of the stack without popping
f - print entire stack
k - pop the value and set precision
i - pop the value and set input radix
o - pop the value and set output radix
function old new delta
packed_usage 33519 33565 +46
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
musl libc's mallocng free() may modify errno if kernel does not support
MADV_FREE which causes echo to echo with error when it shouldn't.
Future versions of POSIX[1] will require that free() leaves errno
unmodified but til then, do not rely free() implementation.
Should fix downstream issues:
https://github.com/alpinelinux/docker-alpine/issues/134https://gitlab.alpinelinux.org/alpine/aports/-/issues/12311
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Zero-length path prefixes can be specified in PATH as a leading or
trailing colon or two adjacent colons. POSIX says that the use of
zero-length prefixes to refer to the current directory is a legacy
feature. Nonetheless the shells in BusyBox respect this feature,
as does 'which'.
Tab-completion of executables using PATH should support this too.
function old new delta
complete_cmd_dir_file 934 931 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3) Total: -3 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Most BusyBox applets respond to the '--help' option by printing
a usage message. This is normally handled by busybox_main() so
applet main routines don't have support for '--help'.
In standalone shell mode with FEATURE_SH_NOFORK enabled nofork
applets are invoked directly, bypassing busybox_main(). This
results in inconsistent handling of '--help':
- applets which call getopt() report "unrecognized option '--help'"
and print help anyway;
- realpath says "--help: No such file or directory" and doesn't
print help;
- usleep says "invalid number '--help'" and doesn't print help.
Avoid inconsistency by checking for '--help' in run_nofork_applet().
Bug found by Ron Yorston.
function old new delta
show_usage_if_dash_dash_help - 70 +70
run_nofork_applet 347 362 +15
run_applet_no_and_exit 432 365 -67
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 85/-67) Total: 18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"In function 'sprint_status48':
error: format not a string literal and no format arguments"
function old new delta
sprint_status48 160 158 -2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
054493350 ("Do not add -lresolv on non-Linux systems") adds a condition
to link with libresolv only on linux systems.
The check requires that CONFIG_UNAME_OSNAME equals Linux. This works only
if the uname applet is enabled. Otherwise, CONFIG_UNAME_OSNAME is empty,
regardless of the platform.
By default, CONFIG_UNAME_OSNAME is the output of uname -o. For most
linux systems, uname -o returns "GNU/Linux" and the check fails. In this
case, linking a static busybox fails because of missing symbols from
libresolv.
networking/lib.a(nslookup.o): In function `add_query':
nslookup.c:789: undefined reference to `__res_mkquery'
networking/lib.a(nslookup.o): In function `parse_reply':
nslookup.c:355: undefined reference to `ns_initparse'
nslookup.c:361: undefined reference to `ns_parserr'
nslookup.c:404: undefined reference to `ns_name_uncompress'
nslookup.c:418: undefined reference to `ns_get16'
nslookup.c:419: undefined reference to `ns_name_uncompress'
..
nslookup.c:456: undefined reference to `ns_get16'
...
nslookup.c:469: undefined reference to `ns_name_uncompress'
...
nslookup.c:489: undefined reference to `ns_get32'
...
collect2: error: ld returned 1 exit status
This patch uses the output of $CC -dumpmachine to detect the target platform
for which we compile. Both gcc and clang support -dumpmachine. Like the
original patch, we link against libresolv only if our target platform is
linux-based.
Fixes: 054493350 ("Do not add -lresolv on non-Linux systems")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Use a NULL value of maxsz_p to indicate to xmalloc_fgets_internal()
that the caller doesn't care about the maximum size of the buffer.
This allows the default maximum size to be set once in
xmalloc_fgets_internal() instead of separately in each caller.
function old new delta
xmalloc_fgets_internal 273 287 +14
xmalloc_fgets_str 30 9 -21
xmalloc_fgetline_str 33 12 -21
xmalloc_fgets_str_len 38 10 -28
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 14/-70) Total: -56 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The command 'nl -b n' should output no line numbers, just some
spaces as a placeholder followed by the actual file content.
Add tests for line numbering by cat and nl. The correct results
were obtained from coreutils.
function old new delta
print_numbered_lines 152 157 +5
.rodata 182456 182453 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 5/-3) Total: 2 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
'[-p N]' should be '[-P N]' in the trivial usage message.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
