Original Info-ZIP's unzip uses unstripped filenames
while doing content listing and filtering, i.e.
- in content listing mode -j is ignored completely
- filtering is applied to non-stripped names, -j
takes effect first while extracting the files
997ad2c64a strips path
components a little bit too early resulting in behavior
deviations.
Fix it by doing stripping after listing/filtering.
p.s. Info-ZIP's unzip behavior is the same as
that of tar in --strip-components=NUM mode
Signed-off-by: Eugene Rudoy <gene.devel@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This particular corrupted file can be dealth with by using "unsigned".
If there will be cases where it genuinely overflows, there is a disabled
code to deal with that too.
function old new delta
get_next_block 1678 1667 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following no longer works as expected:
$ ./busybox tar xfz test.tgz
tar: can't open 'z': No such file or directory
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In the old code fd was an argument, now we need to get the file descriptor
from the xstate structure.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
FEATURE_GETOPT_LONG made dependent on LONG_OPTS.
The folloving options are removed, now LONG_OPTS enables long options
for affected applets:
FEATURE_ENV_LONG_OPTIONS FEATURE_EXPAND_LONG_OPTIONS
FEATURE_UNEXPAND_LONG_OPTIONS FEATURE_MKDIR_LONG_OPTIONS
FEATURE_MV_LONG_OPTIONS FEATURE_RMDIR_LONG_OPTIONS
FEATURE_ADDGROUP_LONG_OPTIONS FEATURE_ADDUSER_LONG_OPTIONS
FEATURE_HWCLOCK_LONG_OPTIONS FEATURE_NSENTER_LONG_OPTS
FEATURE_CHCON_LONG_OPTIONS FEATURE_RUNCON_LONG_OPTIONS
They either had a small number of long options, or their long options are
essential.
Example: upstream addgroup and adduser have ONLY longopts,
we should probably go further and get rid
of non-standard short options.
To this end, make addgroup and adduser "select LONG_OPTS".
We had this breakage caused by us even in our own package!
#if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP
/* We try to use --gid, not -g, because "standard" addgroup
* has no short option -g, it has only long --gid.
*/
argv[1] = (char*)"--gid";
#else
/* Breaks if system in fact does NOT use busybox addgroup */
argv[1] = (char*)"-g";
#endif
xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS.
hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime
Shorten help texts by omitting long option when short opt alternative exists.
Reduction of size comes from the fact that store of an immediate
(an address of longopts) to a fixed address (global variable)
is a longer insn than pushing that immediate or passing it in a register.
This effect is CPU-agnostic.
function old new delta
getopt32 1350 22 -1328
vgetopt32 - 1318 +1318
getopt32long - 24 +24
tftpd_main 562 567 +5
scan_recursive 376 380 +4
collect_cpu 545 546 +1
date_main 1096 1095 -1
hostname_main 262 259 -3
uname_main 259 255 -4
setpriv_main 362 358 -4
rmdir_main 191 187 -4
mv_main 562 558 -4
ipcalc_main 548 544 -4
ifenslave_main 641 637 -4
gzip_main 192 188 -4
gunzip_main 77 73 -4
fsfreeze_main 81 77 -4
flock_main 318 314 -4
deluser_main 337 333 -4
cp_main 374 370 -4
chown_main 175 171 -4
applet_long_options 4 - -4
xargs_main 894 889 -5
wget_main 2540 2535 -5
udhcpc_main 2767 2762 -5
touch_main 436 431 -5
tar_main 1014 1009 -5
start_stop_daemon_main 1033 1028 -5
sed_main 682 677 -5
script_main 1082 1077 -5
run_parts_main 330 325 -5
rtcwake_main 459 454 -5
od_main 2169 2164 -5
nl_main 201 196 -5
modprobe_main 773 768 -5
mkdir_main 160 155 -5
ls_main 568 563 -5
install_main 773 768 -5
hwclock_main 411 406 -5
getopt_main 622 617 -5
fstrim_main 256 251 -5
env_main 198 193 -5
dumpleases_main 635 630 -5
dpkg_main 3991 3986 -5
diff_main 1355 1350 -5
cryptpw_main 233 228 -5
cpio_main 593 588 -5
conspy_main 1135 1130 -5
chpasswd_main 313 308 -5
adduser_main 887 882 -5
addgroup_main 416 411 -5
ftpgetput_main 351 345 -6
get_terminal_width_height 242 234 -8
expand_main 690 680 -10
static.expand_longopts 18 - -18
static.unexpand_longopts 27 - -27
mkdir_longopts 28 - -28
env_longopts 30 - -30
static.ifenslave_longopts 34 - -34
mv_longopts 46 - -46
static.rmdir_longopts 48 - -48
packed_usage 31739 31687 -52
------------------------------------------------------------------------------
(add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840) Total: -488 bytes
text data bss dec hex filename
915681 485 6880 923046 e15a6 busybox_old
915428 485 6876 922789 e14a5 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This fixes a regression which was introduced with commit 2a0867a5
("unzip: optional support for bzip2 and lzma") and causes unzip to exit
with error when extracting archives:
unzip: unsupported method 2048
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
dpkg moved to away from dynamically allocating the hashtables in commit
c87339d584 (dpkg: trivial code shrinkage, and redo G trick correctly) almost
ten years ago, but the cleanup code was never adjusted to match.
Glibc loudly complains about this:
*** Error in `dpkg': free(): invalid pointer: 0x0000007fac3478c0 ***
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A following linking error was observed:
| ==========
| archival/lib.a(tar.o): In function `tar_main':
| archival/tar.c:1168: undefined reference to `unpack_Z_stream'
| archival/tar.c:1168: undefined reference to `unpack_Z_stream'
| ld: busybox_unstripped: hidden symbol `unpack_Z_stream' isn't defined
| ld: final link failed: Bad value
this happened with clang compiler, with the following configs:
| CONFIG_TAR=y
| # CONFIG_FEATURE_SEAMLESS_Z is not set
which can be fixed by adding IF_FEATURE_* checks in.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
... when gzip is selected but not gunzip nor zcat, or when bzip2 is
selected but not bunzip2 nor bzcat.
This regression is introduced in b130f9f758
("Allow 'gzip -d' and 'bzip2 -d' without gunzip or bunzip2")
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
An example of such an error (should be compiled with DEBUG_SANITIZE):
runtime error: left shift of 1 by 31 places cannot be represented in
type 'int'
Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Redundant help texts (one which only repeats the description)
are deleted.
Descriptions and help texts are trimmed.
Some config options are moved, even across menus.
No config option _names_ are changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
These parts of the code essentially check whether
stepping back by rep0 goes negative or not.
LZMA SDK from lzma1604.7z has the following in the corresponding places:
... = dic[dicPos - rep0 + (dicPos < rep0 ? dicBufSize : 0)]
Clearly, not loop here.
Technically, "while" here works: if condition is false (because pos
underflowed), it iterates once, adds header.dict_size (a.k.a. dicBufSize),
this makes pos positive but smaller than header.dict_size, and loop exits.
Now we'll just check for negative result of subtraction, which is less code:
function old new delta
unpack_lzma_stream 2659 2641 -18
(I hope 2 Gbyte+ dictionaries won't be in use soon).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Large nested indented code blocks made more sane with a few gotos.
function old new delta
unzip_main 2491 2519 +28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This example single-applet configuration would trigger the bloat:
CONFIG_FEATURE_SEAMLESS_XZ=y
CONFIG_FEATURE_SEAMLESS_LZMA=y
CONFIG_FEATURE_SEAMLESS_BZ2=y
CONFIG_FEATURE_SEAMLESS_GZ=y
CONFIG_BUNZIP2=y
# CONFIG_ZCAT is not set
# All other applets disabled
Here, the resulting "busybox-bunzip2" binary would contain
unpack_gz_stream, unpack_lzma_stream and unpack_xz_stream functions
code. In other words, the gzip, lzma and xz decompressors' code are
linked into the binary unnecessarily.
This happens because SEAMLESS_MAGIC != 0 and compiler is unable
to figure out that SEAMLESS_MAGIC bit is never set.
Fix this by disabling SEAMLESS_MAGIC option flag (setting its value
to 0) when zcat is disabled. This will help the compiler optimize out
bbunpack() and no longer generate open_zipped() function call.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, shorten many field and variable names.
function old new delta
unzip_main 2334 2376 +42
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
archival/unzip.c: In function 'read_next_cdf':
archival/unzip.c:271:8: warning: variable 'org' set but
not used [-Wunused-but-set-variable]
off_t org;
^~~
Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fix broken logic to get the gzip_level_config value from options -1 to
-9.
This fixes an off-by-one bug that caused gzip -9 output bigger files
than the other compression levels.
It fixes so that compression level 1 to 3 are actually mapped to level 4
as comments say.
It also fixes that levels -4 to -9 is mapped to correct level and avoids
out-of-bounds access.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The somewhat new "unpack in memory" code was broken
for xmalloc_open_zipped_read_close() on NOMMU: we seek back
over signature, but then expect it to be already consumed.
Stop seeking back in this case.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
829901 4086 1904 835891 cc133 busybox_before
829665 4086 1904 835655 cc047 busybox
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on patch by Maxin B. John <maxin.john@intel.com>
function old new delta
pack_lzop 870 859 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for --no-name long option. Just silently ignore it
like the short -n option.
This allows to use busybox gzip with Lynx browser.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
MONOTONIC_SYSCALL=y by default
FEATURE_LAST_SMALL is gone: now FEATURE_LAST_FANCY is a "bool", not a "choice".
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Storing the original file's modification time in the output file is
harmful (precludes deterministic results) and unlike official gzip,
the busybox version provides no way to suppress this behavior; the -n
option is silently ignored. Rather than trying to make -n work, this
patch just removes the timestamp-storing functionality. It should be
considered deprecated anyway; it's not Y2038-safe and gunzip ignores
it by default.
Per RFC 1952, 0 is the correct value to store to indicate that there
is no timestamp.
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We only need to check for signature-less extensions,
currently only .lzma. The rest can be happily autodetected.
This fixes "zcat FILE_WITHOUT_GZ_EXT" case, among others.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Testcase: tar xvzf EMPTY_FILE
function old new delta
open_transformer 102 106 +4
get_header_tar 1781 1785 +4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
stage3-armv7a_hardfp-20130209.tar.bz2, 149189948 bytes long,
md5sum b29ce23312e14eb15a143377d4a38473, was failing to unpack.
It so happened that this file has a run which exactly fills
the 90k buffer. The check was "size >= bufsize", apparently
it has to be ">".
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ar fields are fixed length text strings (padded with spaces). Ensure
bb_strtou doesn't read past the field in case the full width is used.
The fields are only read once, so the simplest/smallest solution to me
seems to be to just pass the length to read_num() and then zero terminate
the string before passing it to bb_strtou. This does mean that the fields
MUST be read in reverse order, so some minor reshuffling was needed.
Bloat-o-meter:
function old new delta
get_header_ar 394 414 +20
read_num 29 36 +7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 27/0) Total: 27 bytes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This fixes tar to order files in tarball correctly in this case:
$ touch 1 2 3; echo -e '1\n2\n3' | tar -T- -c | tar t
1
2
3
Signed-off-by: SASAKI Suguru <suguru@sonik.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is not slower. In fact it seems a tiny bit faster too.
text data bss dec hex filename
2827 0 0 2827 b0b decompress_unlzma.o
2797 0 0 2797 aed decompress_unlzma.o
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The -q flag is used in shell scripts for suppressing output.
Have our applets swallow the flag for compatibility.
Reported-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
function old new delta
xz_dec_reset - 77 +77
unpack_xz_stream 2402 2397 -5
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
xz_dec_run() could incorrectly return XZ_BUF_ERROR if
all of the following was true:
- The caller knows how many bytes of output to expect
and only provides that much output space.
- When the last output bytes are decoded, the
caller-provided input buffer ends right before
the LZMA2 end of payload marker. So LZMA2 won't
provide more output anymore, but it won't know it
yet and thus won't return XZ_STREAM_END yet.
- A BCJ filter is in use and it hasn't left any
unfiltered bytes in the temp buffer. This can happen
with any BCJ filter, but in practice it's more likely
with filters other than the x86 BCJ.
This fixes <https://bugzilla.redhat.com/show_bug.cgi?id=735408>
where Squashfs thinks that a valid file system is corrupt.
Thanks to Jindrich Novy for telling me that such a bug report
exists, Phillip Lougher for providing excellent debug info,
and other people on #fedora-ppc.
This also fixes a similar bug in single-call mode where the
uncompressed size of a XZ Block using BCJ + LZMA2 was 0 bytes
and caller provided no output space. Many empty .xz files
don't contain any Blocks and thus don't trigger this bug.
This also tweaks a closely related detail: xz_dec_bcj_run()
could call xz_dec_lzma2_run() to decode into temp buffer when
it was known to be useless. This was harmless although it
wasted a minuscule number of CPU cycles.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
No .xz encoder creates files with empty LZMA2 streams,
but such files would still be valid and decompressors
must accept them.
Note that empty .xz files are a different thing than
empty LZMA2 streams. This bug didn't affect typical .xz
files that had no uncompressed data.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Users were reporting getting errors like
"ls: error while loading shared libraries: libc.so.6: ELF load command past end of file"
while rpm was unpacking glibc tarball.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
99% plus of all people who'll get corrupted archive wouldn't bother
debugging it. The rest can uncomment the code.
function old new delta
unpack_Z_stream 1304 1234 -70
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix filename order and free the list of names.
function old new delta
llist_rev - 21 +21
get_header_tar 1733 1741 +8
unpack_package 587 585 -2
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 29/-2) Total: 27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes unzip to FAT filesystems not exit with error.
This is similar to how the "normal" unzip works.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Now get_header_tar_gz, get_header_tar_bz2, get_header_tar_lzma
are only used if dpkg is built.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
unpack_gz_stream_with_info: fix buggy error check
man: fix possible accesses past the end of a string
move seamless uncompression helpers from read_printf.c to open_transformer.c
function old new delta
show_manpage 153 212 +59
unpack_gz_stream_with_info 520 539 +19
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
