Commit Graph

17036 Commits

Author SHA1 Message Date
Ron Yorston
ac6495f6fb vi: allow ctrl-D to reduce indentation
When whitespace has been automatically added to a new line due to
autoindent entering ctrl-D should reduce the level of indentation.

Implement an approximation of this by treating ctrl-D as backspace.
For the common case of indentation using tabs this is good enough.
My attempt at a full implementation was three times bigger.

function                                             old     new   delta
char_insert                                          476     531     +55
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 55/0)               Total: 55 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-15 13:09:12 +02:00
Ron Yorston
d6e653d667 vi: don't move cursor when yanking whole lines
When whole lines are yanked using 'yy' or 'Y' vi doesn't change the
cursor position.  Make BusyBox vi do the same.

function                                             old     new   delta
do_cmd                                              4776    4786     +10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 10/0)               Total: 10 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-15 13:09:12 +02:00
Ron Yorston
38ae0f3e3e vi: reset command count when specifying '0' range
Since commit a54450248 (vi: allow the '.' command to have a
repetition count) using '0' to specify a range doesn't work with
a non-zero repeat count, e.g. '1d0'.  Users wouldn't normally try
to do that but the '.' command does.

Add a special case in get_motion_char() to handle this.

function                                             old     new   delta
find_range                                           737     746      +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0)                 Total: 9 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-15 13:09:12 +02:00
Ron Yorston
033fa3d5c6 vi: code shrink motion by paragraph
Use a hand-coded loop to search for paragraph boundaries instead
of calling char_search().  We were using a loop anyway to skip
consecutive newlines.

function                                             old     new   delta
do_cmd                                              4792    4752     -40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-40)             Total: -40 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-15 13:09:12 +02:00
Ron Yorston
d9d19896a9 vi: position cursor on last column of tab
Vi places the cursor on the last column of a tab character whereas
BusyBox vi puts it on the first.  This is disconcerting for
experienced vi users and makes it impossible to distinguish
visually between an empty line and one containing just a tab.

It wasn't always this way.  Prior to commit e3cbfb91d (vi: introduce
FEATURE_VI_8BIT) BusyBox vi also put the cursor on the last column.
However there were problems with cursor positioning when text was
inserted before a tab.  Commit eaabf0675 (vi: multiple fixes by
Natanael Copa) includes a partial attempt to fix this.  (The code is
still present but it's never executed.  Clever compilers optimise it
away.)

Revert the changes of commit e3cbfb91d and fix the insert problem
for all tabs, not just the first.

To quote Natanael:  "Costs a few bytes but its worth it imho".

function                                             old     new   delta
refresh                                              974    1000     +26
move_to_col                                           81      83      +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 28/0)               Total: 28 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-15 13:09:12 +02:00
Ron Yorston
9b2a3895ee vi: correctly record deleted characters
The undo queue didn't record deleted characters properly.  For
example, insert some text, backspace over a couple of characters
then exit insert mode.  At this point undo will restore two nulls
instead of the deleted characters.

The fix is in undo_push():  record the state of the UNDO_USE_SPOS
flag and clear it before using 'u_type'.

Also, update the comments to reflect the fact that UNDO_QUEUED_FLAG
isn't actually used.

function                                             old     new   delta
undo_push                                            443     435      -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8)               Total: -8 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-15 13:09:12 +02:00
Denys Vlasenko
c0943ac451 platform.h: fix for Bionic >= 21 not having wait3()
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 22:14:36 +02:00
Denys Vlasenko
cca4c9f4c0 unzip: add -t
function                                             old     new   delta
packed_usage                                       33584   33598     +14
.rodata                                           103218  103219      +1
unzip_main                                          2665    2656      -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 15/-9)               Total: 6 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 21:34:00 +02:00
Denys Vlasenko
afc766fc12 unzip: fix for .zip archives with >4GB file
function                                             old     new   delta
unzip_main                                          2644    2665     +21
input_tab                                            926     927      +1
bb_banner                                             46      47      +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 23/0)               Total: 23 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 21:15:25 +02:00
Denys Vlasenko
1a45b2ccea fix "warning array subscript has type 'char'"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 19:12:43 +02:00
Denys Vlasenko
eb1b2902b8 Makefile.flags: add a test for -lrt availability
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 19:01:53 +02:00
Denys Vlasenko
7c813fbabf echo: fix !ENABLE_FEATURE_FANCY_ECHO build
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 18:55:30 +02:00
Denys Vlasenko
fe2d8065e3 fix gcc-11.0 warnings
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 17:52:18 +02:00
Denys Vlasenko
ba9f9c2d2c *: --help text tweaks
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 15:15:45 +02:00
Denys Vlasenko
93f1255af2 touch: shorten --help text
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 14:52:09 +02:00
Denys Vlasenko
d156bcf71e touch: code shrink
function                                             old     new   delta
touch_main                                           424     421      -3

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 14:46:35 +02:00
Denys Vlasenko
fe9507f8c3 touch: fix -am
function                                             old     new   delta
touch_main                                           414     424     +10

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-14 01:01:20 +02:00
Rafał Miłecki
4eb46e1be6 dd: support iflag=count_bytes
It allows passing amount of bytes in the count=

function                                             old     new   delta
packed_usage                                       33599   33617     +18
static.iflag_words                                    29      41     +12
dd_main                                             1601    1607      +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 36/0)               Total: 36 bytes

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 21:35:57 +02:00
Alison Winters
7b5cbfd6d6 vi: allow writing to another file if this one is readonly
Version 2. Same change but rebased after Ron's improvements. Fixes bug
where if you open a read only file, you can't save it as a different
filename.

function                                             old     new   delta
colon                                               3160    3162      +2

Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 19:30:16 +02:00
Ron Yorston
27c1bc8dfb build system: avoid build failure during bisection
Commit 4bdc914ff (build system: fix compiler warnings) added a
test on the return value of fgets() in split-include.c.

During bisection it's possible to go back to a state where a
configuration value didn't exist.  This results in an empty
include file corresponding to the missing feature.  If a
subsequent bisection returns to a state where the feature exists
split-include treats the empty file as an error and the build
fails.

Add a call to ferror() to distinguish between fgets() failing
due to an error and due to there being no data to read.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 18:26:46 +02:00
Denys Vlasenko
f0c0c56e9b hush: beautify ^D handling to match ash / bash
function                                             old     new   delta
fgetc_interactive                                    227     244     +17

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 16:42:17 +02:00
Rasmus Villemoes
50a37459ff watchdog: make open-write-close-open functionality a config knob
The behaviour introduced by commit 31c765081d ("watchdog: stop
watchdog first on startup") causes warnings in the kernel log when the
nowayout feature is enabled:

[   16.212184] watchdog: watchdog0: nowayout prevents watchdog being stopped!
[   16.212196] watchdog: watchdog0: watchdog did not stop!

The latter may also appear by itself in case the watchdog is of the
type that cannot be stopped once started (e.g. the common
always-running gpio_wdt kind).

These warnings can be somewhat ominous and distracting, so allow
configuring whether to use this open-write-close-open sequence rather
than just open. Also saves a bit of .text when disabled:

function                                             old     new   delta
shutdown_on_signal                                    31      58     +27
watchdog_main                                        339     306     -33
shutdown_watchdog                                     34       -     -34
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 27/-67)            Total: -40 bytes

Make it default n:

- It's a workaround for one specific type of watchdog (and
  that seems to be a defect in the kernel driver)
- Even when not enabled in busybox config, it can easily be
  implemented outside busybox
- Code size
- Commit 31c765081d should be considered a regression for all the
  boards that now end up with KERN_CRIT warnings in dmesg.
- The author of that commit said "This use case is evidently rare, so
  if it is indeed causing problems for other people I'd OK then I
  understand whatever needs to be done." in the v1 thread.

Cc: Matt Spinler <mspinler@linux.vnet.ibm.com>
Cc: deweloper@wp.pl
Cc: tito <farmatito@tiscali.it>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 16:05:27 +02:00
Denys Vlasenko
9c210f0efb touch: fix previous commit
function                                             old     new   delta
touch_main                                           423     414      -9

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 15:49:06 +02:00
Denys Vlasenko
6b6ff80299 touch: make FEATURE_TOUCH_NODEREF unconditional
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 15:45:59 +02:00
Denys Vlasenko
3630054504 touch: code shrink
function                                             old     new   delta
touch_main                                           450     423     -27

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 15:41:57 +02:00
Denys Vlasenko
6f63a2ba0e touch: code shrink
function                                             old     new   delta
.rodata                                           103215  103218      +3
touch_main                                           460     450     -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-10)              Total: -7 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 15:11:47 +02:00
Xabier Oneca
e3c6a0973c touch: prevent usage of -r and -t at once
coreutils forbids this combination.

Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 14:48:24 +02:00
Denys Vlasenko
79c92dbd70 touch: switch to using utimensat() and futimens()
This patch changes the functions used to update timestamps in touch.

Before, utimes() and lutimes() were used, which had certain
disadvantages.
They are unable to handle nanosecond timestamps, and implementations of
certain features like -a and -m require running stat() in a loop.

Almost all implementations of utimes() and lutimes() are wrappers for
utimensat(), this is the case for glibc, ulibc and musl libc.

function                                             old     new   delta
__futimens_time64                                      -      24     +24
__lutimes_time64                                      80       -     -80
touch_main                                           539     456     -83
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 0/1 up/down: 24/-163)          Total: -139 bytes

Signed-off-by: urmum-69 <urmum69@snopyta.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-13 11:31:46 +02:00
Denys Vlasenko
1a181264d5 touch: unbreak -h
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-12 20:12:56 +02:00
Xabier Oneca
7ec254467c touch: remove unneeded GETOPT32 defines
Long options handling (getopt32 vs getopt32long) is done in libbb.h, no need to
care here of the same logic. This cleans the code a bit.

Also, --no-create was grouped as a SUSv3 option, where as the short -c was not.
Even if it is part of SUS, leave it out as was the short option.

v2: Fix for disabled ENABLE_LONG_OPTS. getopt32long does not like
  IF_FEATURE_xxx() style conditionals... :/

Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-12 20:05:48 +02:00
Xabier Oneca
de1a49cb41 touch: fix atime set from reference file
When using a file's times as reference, use both atime and mtime for the files
to be modified.

Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-12 20:05:48 +02:00
Xabier Oneca
520bb3eac2 touch: add SUSv3 options -a and -m
Add missing -a and -m options to be fully SUSv3 compliant.

function                                             old     new   delta
touch_main                                           415     510     +95
packed_usage                                       33824   33865     +41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 136/0)             Total: 136 bytes

v2: Ignore -a/-m if not ENABLE_FEATURE_TOUCH_SUSV3.

Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-12 20:05:48 +02:00
Natanael Copa
7323bca1b0 lineedit: fix tab completion with equal sign
Fix tab completion for the path when equal sign (=) is used. For
example: dd if=/dev/ze<tab>

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:34:50 +02:00
Ron Yorston
f4a9908b4c vi: improvements to reporting of changes
Traditional vi is mostly silent about the results of yank, delete,
change, undo or substitution commands.  Vim reports some details
about undo and substitution.  BusyBox vi is positively verbose in
comparison.

Make some improvements to BusyBox vi:

- Add vim-like reporting of changes caused by substitutions, of
  the form '64 substitutions on 53 lines'.  This replaces a fairly
  useless report of the result of the last change made.

- Ensure that the report about put operations correctly reflects the
  newly introduced repetition count.

- Commit 25d2592640 tried to limit status updates for delete and
  yank operations by detecting whether the register had changed.
  This didn't always work because the previously allocated memory
  could be reused for the new register contents.  Fix this by
  delaying freeing the old register until after the new one has
  been allocated.

- Add a configuration option to control verbose status reporting.
  This is on by default.  Turning it off make BusyBox vi as taciturn
  as traditional vi and saves 435 bytes.

function                                             old     new   delta
colon                                               3212    3292     +80
yank_status                                            -      74     +74
static.text_yank                                      99      86     -13
string_insert                                        130      76     -54
do_cmd                                              4842    4776     -66
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 154/-133)           Total: 21 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:56 +02:00
Ron Yorston
99fb5f2144 vi: issue a warning on failure to find a character
When a search for a character within a line fails issue a warning.

function                                             old     new   delta
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0)                 Total: 0 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:56 +02:00
Ron Yorston
6220b4d531 vi: make the substitute command more like vi
Make the ':s/find/replace/g' command behave more like vi:

- the final delimiter is optional if no flag is specified;

- the cursor is moved to the first visible character of the last
  line where a substitution was made;

- a warning is displayed if no substitution was made.

function                                             old     new   delta
colon                                               3156    3212     +56
.rodata                                           105133  105142      +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 65/0)               Total: 65 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
951c6ded3a vi: make put commands more like vi
Make the put commands 'p' and 'P' behave more like vi:

- allow a repetition count to be specified;

- when the text being inserted doesn't include a newline the cursor
  should be positioned at the end of the inserted text.

function                                             old     new   delta
do_cmd                                              4765    4842     +77
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 77/0)               Total: 77 bytes

v2: Don't break build when FEATURE_VI_UNDO is disabled.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
a54450248b vi: allow the '.' command to have a repetition count
The '.' command repeats the last text change.  When it has a
repetition count replay the change the number of times requested.
Update the stored count if it changes.  For example,

   3dw     deletes 3 words
   .       deletes another 3 words
   2.      deletes 2 words and changes the stored count
   .       deletes 2 words

function                                             old     new   delta
do_cmd                                              4746    4781     +35
.rodata                                           105133  105138      +5
edit_file                                            887     849     -38
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 40/-38)              Total: 2 bytes

v2: Change implementation to include repetition count in string.
    Otherwise repeating 'r' doesn't work properly.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
fe76569daa vi: allow 'r' command to be aborted, repeated
Make the 'r' command behave more like vi:

- abort the command if ESC is entered after the 'r';

- allow a repeat count to be entered before the 'r';

- if the repeat count exceeds the space available on the line don't
  change any characters and issue an alert.

function                                             old     new   delta
do_cmd                                              4679    4746     +67
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 67/0)               Total: 67 bytes

v2: Don't break build when FEATURE_VI_UNDO is disabled.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
b18c7bf702 vi: improvements to undo
The left shift operator ('<') didn't support undo at all; right
shift ('>') required changes to be undone separately for each line.
Allow both types of shift to be undone as a single operation.

Also, neither traditional vi nor vim yank the lines being shifted by
the '<' and '>' commands, so remove that call to yank_delete();

When a repetition count was specified for the '~', 'x', 'X' or 's'
commands the changes had to be undone one character at a time.
Allow undo as a single operation (though the delete and change
parts of the 's' command still have to be undone separately).

function                                             old     new   delta
undo_push_insert                                      37      40      +3
do_cmd                                              4695    4663     -32
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-32)             Total: -29 bytes

v2: Don't break build when FEATURE_VI_UNDO is  disabled.  Don't reset
    'undo_del' too early in '~' handling code.  Code shrink '~'.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
e577afca7c vi: more fixes to range selection by word
An example in my vi book presents different ways to fix the spelling
of the last word in a line:

   ... anyweigh.

With the cursor on the 'e' the command 'cway' should do the job.
Since commit 776b56d77, though, 'cw' incorrectly includes the full
stop in the range if we're on the last line of the file.

(Prior to commit 776b56d77 BusyBox vi got 'cw' right in this case but
'cW' wrong:  it *didn't* delete the full stop.)

Reinstate some of the bloat removed by the earlier commit to fix this.

Also, commit 7b4c2276a (vi: fix word operations across line boundaries)
incorrectly ignores whitespace after a single character word.  Adjust
the condition to avoid this.

function                                             old     new   delta
find_range                                           707     737     +30
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 30/0)               Total: 30 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
b7b1119d9f vi: improvements to range selection
Rewrite find_range(), pushing quite a bit of code from do_cmd()
down into it.

- The commands 'y', 'd', 'c', '<' and '>' can be given twice to
  specify a whole-line range.  BusyBox vi actually accepted any
  second character from that group, e.g. 'dc' or '<y', with the
  latter being accepted even if yank was disabled.  Require the
  two characters to match.

- '<' and '>' commands followed by ESC incorrectly issued an alert.

- Allow search commands and a marker (specified as "y'a", for example)
  to define a range for those operators that support it.

function                                             old     new   delta
find_range                                           518     707    +189
.rodata                                           105119  105133     +14
get_motion_char                                       68       -     -68
do_cmd                                              4860    4695    -165
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 203/-233)          Total: -30 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
7ce0e75c1f vi: code shrink search commands
Changes to search commands ('/', '?', 'n' and 'N'):

- Rewrite to be smaller and (possibly) clearer.

- Issue a warning when a repeat search is requested without a
  previous search having been made.

Vim and BusyBox vi support a repetition count for searches though
the original vi doesn't.  If the count exceeds the number of
occurrences of the search string the search may loop through the
file multiple times.

function                                             old     new   delta
.rodata                                           105135  105119     -16
do_cmd                                              4898    4860     -38
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-54)             Total: -54 bytes

Signed-off-by; Ron Yorston <rmy@pobox.com>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-11 00:18:55 +02:00
Ron Yorston
9f017d9db0 vi: changes to option handling
Since commit 70ee23399 (vi: code shrink) the ':set' command is
unable to process multiple options on a line.  Fix this by
temporarily null-terminating each option.

Change the default setting for all options to off to match vim.
Actually, 'flash' isn't an option in vim, only traditional vi,
where it's on by default.  In vim the corresponding option is
'visualbell' which defaults to off.  POSIX doesn't have either
of these.

Allow the abbreviation 'ts' for the 'tabstop' option.

Issue an error message if:

- an option is not implemented
- an option that takes a value has no '=' or has a 'no' prefix
- a boolean option has a '='

function                                             old     new   delta
colon                                               2944    3003     +59
.rodata                                           103171  103189     +18
vi_main                                              274     270      -4
setops                                                73       -     -73
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 77/-77)              Total: 0 bytes

v2: Try harder to detect invalid options.  Thanks to Peter D for pointing
    this out.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-04-08 12:50:01 +02:00
Ron Yorston
24198f652f vi: deal with invalid movements in shift commands
Since commit 25d259264 (vi: make buffer handling more vi-like)
find_range() can return early when an invalid movement is
specified.

The call to find_range() in the code that handles shift commands
('<' and '>') doesn't check for this condition.  Previously this
only resulted in the current line being shifted but it can now
result in a segfault.

Check for an invalid movement and notify the user without taking
any further action.

function                                             old     new   delta
do_cmd                                              4890    4898      +8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 8/0)                 Total: 8 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-03-30 14:51:27 +02:00
Ron Yorston
a25b4c2c42 vi: code shrink
- In the '+' and '-' commands the call to dot_skip_over_ws() is
  only needed for the final line processed so it can be moved out
  of the while loop.

- Marking sync_cursor() NOINLINE doesn't seem to offer the same
  advantages it did in 2009 (commit adf922ec2).

function                                             old     new   delta
refresh                                              694     974    +280
do_cmd                                              4900    4887     -13
sync_cursor                                          336       -    -336
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 280/-349)          Total: -69 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-03-29 12:16:21 +02:00
Ron Yorston
d56da68057 vi: improve operations involving paragraph movement
Movement by paragraph doesn't always involve whole lines.  If the
cursor is positioned in the middle of a line deleting to either end
of the paragraph will result in one partial line and zero or more
full lines.

Adjust the end of ranges delimited by paragraph movement to more
closely match what vi does.

function                                             old     new   delta
find_range                                           467     518     +51
at_eof                                                 -      49     +49
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 100/0)             Total: 100 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-03-29 12:16:21 +02:00
Ron Yorston
8b571bd7b5 vi: improve motion by paragraph
When moving by paragraph ('{' and '}'):

- Treat multiple empty lines as a single paragraph separator.

- When no paragraph separator is found move to the start or end of
  the file depending on the direction of motion.

function                                             old     new   delta
do_cmd                                              4821    4900     +79
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 79/0)               Total: 79 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-03-29 12:16:21 +02:00
Ron Yorston
d3b74826c5 vi: allow repetition count for paragraph motion
The paragraph motion commands '{' and '}' should accept a count.

function                                             old     new   delta
do_cmd                                              5054    5071     +17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 17/0)               Total: 17 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-03-29 12:16:21 +02:00
Ron Yorston
1e84daf054 vi: allow motion count for change/delete/yank/shift
The motion that determines the range of a change, delete, yank
or shift operation can have its own count.  Thus the commands
'5dd' and 'd5d' are equivalent:  both delete 5 lines.

When the command itself also has a count the two values are
multiplied.  Thus the command '2d3w' deletes 6 words and '2D3G'
deletes from the current line to line 6.

(When dealing with structured data it might make sense to think in
units of 3 words so '2d3w' is deleting 2 such units.  It doesn't
seem quite as sensible to express 'delete from current line to line 6'
as '2D3G' but vi permits it.)

function                                             old     new   delta
get_motion_char                                        -      68     +68
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/0 up/down: 68/0)               Total: 68 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-03-29 12:16:21 +02:00