Apart from the -p option, POSIX also mandates an -s option which
suppresses the output of byte counts for the e, E, r, and w command.
From these commands, Busybox ed presently only implements the r and w
commands. This commit ensures that these two command do not output any
bytes counts when the -s option is passed. The shell escape command,
also effected by the -s option, is not implemented by Busybox at the
moment.
function old new delta
packed_usage 34096 34115 +19
doCommands 1887 1900 +13
readLines 388 397 +9
.rodata 104196 104200 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 45/0) Total: 45 bytes
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is perfectly valid to start a regex with ^ and have other patterns
with \| that can match more than once, e.g. the following example
should print ca, as illustrated with gnu sed:
$ echo 'abca' | sed -e 's/^a\|b//g'
ca
busybox before patch:
$ echo 'abca' | busybox sed -e 's/^a\|b//g'
bca
busybox after patch:
$ echo 'abca' | ./busybox sed -e 's/^a\|b//g'
ca
regcomp handles ^ perfectly well as illustrated with the second 'a' that
did not match in the example, we ca leave the non-repeating to it if
appropriate.
The check had been added before using regcomp and was required at the
time (f36635cec6) but no longer makes sense now.
(tested with glibc and musl libc)
function old new delta
add_cmd 1189 1176 -13
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
POSIX.1-2008 mandates the following regarding the read command:
If the read is successful, and -s was not specified, the number
of bytes read shall be written to standard output in the
following format:
"%d\n", <number of bytes read>
This commit aligns the output of busybox ed with POSIX.1-2008 by
removing the file name from the output for the read command.
This slipped through in 4836a0708fd0aaeb82871a3762b40fcf4b61e812.
function old new delta
.rodata 104203 104196 -7
readLines 409 388 -21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-28) Total: -28 bytes
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
POSIX.1-2008 mandates the following regarding the file command-line
argument:
If the file argument is given, ed shall simulate an e command
on the file named by the pathname […]
The specification for the e command mandates the following behaviour
regarding the current line number in POSIX.1-2008:
The current line number shall be set to the address of the last
line of the buffer.
However, without this commit, busybox ed will set the current line
number to 1 if a file is given on the command-line and this file is not
empty (lastNum != 0). This is incorrect and fixed in this commit by not
modifying the current line number in ed_main(). As such, the current
line number will be zero for empty files and otherwise be set to the
address of the last line of the buffer.
function old new delta
ed_main 144 128 -16
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The POSIX.1-2008 specification of ed(1) mandates two command-line
options: -p (for specifying a prompt string) and -s (to suppress writing
of byte counts). This commit adds support for the former. Furthermore,
it also changes the default prompt string to an empty string (instead
of ": ") since this is also mandated by POSIX:
-p string Use string as the prompt string when in command mode.
By default, there shall be no prompt string.
function old new delta
ed_main 112 144 +32
packed_usage 34074 34097 +23
doCommands 1889 1887 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 55/-2) Total: 53 bytes
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support to for "-n" to cmp in order to compare at most n bytes.
function old new delta
cmp_main 552 589 +37
.rodata 104198 104203 +5
packed_usage 34102 34074 -28
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 42/-28) Total: 14 bytes
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The '%' character in a format specification may be followed by
one or more flags from the list "+- #0". BusyBox printf didn't
support the '0' flag or allow multiple flags to be provided.
As a result the formats '%0*d' and '%0 d' were considered to be
invalid.
The lack of support for '0' was pointed out by Andrew Snyder on the
musl mailing list:
https://www.openwall.com/lists/musl/2021/12/14/2
function old new delta
printf_main 860 891 +31
.rodata 99281 99282 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 32/0) Total: 32 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
udhcp_insert_new_option treats code for IPv6 as follows:
new->data[D6_OPT_CODE] = code >> 8;
new->data[D6_OPT_CODE + 1] = code & 0xff;
udhcp_find_option tests the code as follows:
while (opt_list && opt_list->data[OPT_CODE] < code)
...
if (opt_list && opt_list->data[OPT_CODE] == code)
So yes, OPT_CODE and D6_OPT_CODE are both 0, but the D6_OPT_CLIENTID =
1 value means that the 1 is in the seconds byte, and udhcp_find_option
is only looking at the first byte, So the send_d6_release can never
find it the created option.
function old new delta
udhcp_find_option 28 53 +25
attach_option 276 284 +8
udhcpc6_main 2602 2607 +5
perform_d6_release 262 267 +5
udhcpd_main 1518 1520 +2
udhcpc_main 2542 2544 +2
add_serverid_and_clientid_options 46 48 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 49/0) Total: 49 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
To check if libcrypt and librt are available, we check if we can
compile and link a simple test program.
These checks do not match the actual linking if CONFIG_STATIC is enabled.
For CONFIG_STATIC, CFLAGS_busybox is set to -static. The checks don't use
CFLAGS_busybox and detect a shared libcrypt or librt. If we link busybox
later and we have no static libcrypt or librt, linking will fail.
Update the libcrypt and librt checks to use CFLAGS_busybox.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
After more testing, (1) I'm more sure it is indeed correct, and
(2) it is a significant speedup - we do a lot of those multiplications.
function old new delta
sp_512to256_mont_reduce_8 191 223 +32
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Change sp_256to512z_mont_{mul,sqr}_8 to not require/zero upper 256 bits.
There is only one place where we actually used that (and that's why there
used to be zeroing memset of top half!). Fix up that place.
As a bonus, 256x256->512 multiply no longer needs to care for
"r overlaps a or b" case.
This shrinks sp_point structure as well, not just temporaries.
function old new delta
sp_256to512z_mont_mul_8 150 - -150
sp_256_mont_mul_8 - 147 +147
sp_256to512z_mont_sqr_8 7 - -7
sp_256_mont_sqr_8 - 7 +7
sp_256_ecc_mulmod_8 494 543 +49
sp_512to256_mont_reduce_8 243 249 +6
sp_256_point_from_bin2x32 73 70 -3
sp_256_proj_point_dbl_8 353 345 -8
sp_256_proj_point_add_8 544 499 -45
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/3 up/down: 209/-213) Total: -4 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
