Commit ac6495f6f (vi: allow ctrl-D to reduce indentation) treated
ctrl-D during autoindent as a backspace. This was adequate for
indentation using tabs but doesn't work well with the expandtab
option. In the latter case it's necessary to backspace over all
the spaces.
Make ctrl-D work correctly when spaces are present in the indent.
Also, make it behave more like vim:
- ctrl-D is independent of autoindent;
- indentation is reduced even when the cursor isn't positioned at
the end of the indent.
function old new delta
char_insert 679 717 +38
get_column - 37 +37
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 75/0) Total: 75 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This implements the vim option expandtab in BusyBox vi. From
vim help:
In Insert mode: Use the appropriate number of spaces to insert a
<Tab>. Spaces are used in indents with the '>' and '<' commands and
when 'autoindent' is on. To insert a real tab when 'expandtab' is
on, use CTRL-V<Tab>.
This implementation doesn't change how BusyBox vi handles autoindent:
it continues to copy the indentation from a neighbouring line. If
that line has tabs in its indentation so too will the new line.
function old new delta
char_insert 563 679 +116
next_column - 48 +48
.rodata 105211 105236 +25
colon 3844 3855 +11
refresh 1000 982 -18
move_to_col 83 59 -24
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/2 up/down: 200/-42) Total: 158 bytes
Signed-off-by: Peter D <urmum69@snopyta.org>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Line addresses in colon commands can be defined using an expression
that includes '+' or '-' operators. The implementation follows
traditional vi:
- The first term in the expression defines an address. It can be
an absolute line number, '.', '$', a search or a marker.
- The second and subsequent terms must be non-negative integers.
- If the first term is missing '.' is assumed. If the operator is
missing addition is assumed. If the final term in missing an
offset of 1 is assumed.
Thus the following are valid addresses:
.+1 .+ + .1
.-1 .- -
The following are not valid (though they are in vim):
.+$ .$ 2+.
function old new delta
colon 3701 3844 +143
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 143/0) Total: 143 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It should be possible to use a backward search as a line address
in colon commands.
function old new delta
colon 3661 3701 +40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 40/0) Total: 40 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
BusyBox vi didn't have proper handling for invalid markers or
unsuccessful searches in colon line addresses. This could result
in the wrong lines being affected by a change.
Detect when an invalid address is specified, propagate an error
indicator up the call chain and issue a warning.
function old new delta
colon 3604 3661 +57
.rodata 105195 105211 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 73/0) Total: 73 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The context marks that are automatically updated and can be used
with the "''" command didn't behave the same as in vi. Marks
were only being set for certain editing commands when they should
have been set on successful movement commands.
Make BusyBox vi behave more like vi.
function old new delta
.rodata 105179 105194 +15
do_cmd 4723 4668 -55
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 15/-55) Total: -40 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Opening a line above the current line with the 'O' command should
use the current, not previous, line to determine how much to
autoindent.
function old new delta
char_insert 531 563 +32
do_cmd 4746 4723 -23
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 32/-23) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When whitespace has been automatically added to a new line due to
autoindent entering ctrl-D should reduce the level of indentation.
Implement an approximation of this by treating ctrl-D as backspace.
For the common case of indentation using tabs this is good enough.
My attempt at a full implementation was three times bigger.
function old new delta
char_insert 476 531 +55
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 55/0) Total: 55 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When whole lines are yanked using 'yy' or 'Y' vi doesn't change the
cursor position. Make BusyBox vi do the same.
function old new delta
do_cmd 4776 4786 +10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 10/0) Total: 10 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit a54450248 (vi: allow the '.' command to have a
repetition count) using '0' to specify a range doesn't work with
a non-zero repeat count, e.g. '1d0'. Users wouldn't normally try
to do that but the '.' command does.
Add a special case in get_motion_char() to handle this.
function old new delta
find_range 737 746 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Use a hand-coded loop to search for paragraph boundaries instead
of calling char_search(). We were using a loop anyway to skip
consecutive newlines.
function old new delta
do_cmd 4792 4752 -40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-40) Total: -40 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Vi places the cursor on the last column of a tab character whereas
BusyBox vi puts it on the first. This is disconcerting for
experienced vi users and makes it impossible to distinguish
visually between an empty line and one containing just a tab.
It wasn't always this way. Prior to commit e3cbfb91d (vi: introduce
FEATURE_VI_8BIT) BusyBox vi also put the cursor on the last column.
However there were problems with cursor positioning when text was
inserted before a tab. Commit eaabf0675 (vi: multiple fixes by
Natanael Copa) includes a partial attempt to fix this. (The code is
still present but it's never executed. Clever compilers optimise it
away.)
Revert the changes of commit e3cbfb91d and fix the insert problem
for all tabs, not just the first.
To quote Natanael: "Costs a few bytes but its worth it imho".
function old new delta
refresh 974 1000 +26
move_to_col 81 83 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 28/0) Total: 28 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The undo queue didn't record deleted characters properly. For
example, insert some text, backspace over a couple of characters
then exit insert mode. At this point undo will restore two nulls
instead of the deleted characters.
The fix is in undo_push(): record the state of the UNDO_USE_SPOS
flag and clear it before using 'u_type'.
Also, update the comments to reflect the fact that UNDO_QUEUED_FLAG
isn't actually used.
function old new delta
undo_push 443 435 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8) Total: -8 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Version 2. Same change but rebased after Ron's improvements. Fixes bug
where if you open a read only file, you can't save it as a different
filename.
function old new delta
colon 3160 3162 +2
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 4bdc914ff (build system: fix compiler warnings) added a
test on the return value of fgets() in split-include.c.
During bisection it's possible to go back to a state where a
configuration value didn't exist. This results in an empty
include file corresponding to the missing feature. If a
subsequent bisection returns to a state where the feature exists
split-include treats the empty file as an error and the build
fails.
Add a call to ferror() to distinguish between fgets() failing
due to an error and due to there being no data to read.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The behaviour introduced by commit 31c765081d ("watchdog: stop
watchdog first on startup") causes warnings in the kernel log when the
nowayout feature is enabled:
[ 16.212184] watchdog: watchdog0: nowayout prevents watchdog being stopped!
[ 16.212196] watchdog: watchdog0: watchdog did not stop!
The latter may also appear by itself in case the watchdog is of the
type that cannot be stopped once started (e.g. the common
always-running gpio_wdt kind).
These warnings can be somewhat ominous and distracting, so allow
configuring whether to use this open-write-close-open sequence rather
than just open. Also saves a bit of .text when disabled:
function old new delta
shutdown_on_signal 31 58 +27
watchdog_main 339 306 -33
shutdown_watchdog 34 - -34
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 27/-67) Total: -40 bytes
Make it default n:
- It's a workaround for one specific type of watchdog (and
that seems to be a defect in the kernel driver)
- Even when not enabled in busybox config, it can easily be
implemented outside busybox
- Code size
- Commit 31c765081d should be considered a regression for all the
boards that now end up with KERN_CRIT warnings in dmesg.
- The author of that commit said "This use case is evidently rare, so
if it is indeed causing problems for other people I'd OK then I
understand whatever needs to be done." in the v1 thread.
Cc: Matt Spinler <mspinler@linux.vnet.ibm.com>
Cc: deweloper@wp.pl
Cc: tito <farmatito@tiscali.it>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch changes the functions used to update timestamps in touch.
Before, utimes() and lutimes() were used, which had certain
disadvantages.
They are unable to handle nanosecond timestamps, and implementations of
certain features like -a and -m require running stat() in a loop.
Almost all implementations of utimes() and lutimes() are wrappers for
utimensat(), this is the case for glibc, ulibc and musl libc.
function old new delta
__futimens_time64 - 24 +24
__lutimes_time64 80 - -80
touch_main 539 456 -83
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 0/1 up/down: 24/-163) Total: -139 bytes
Signed-off-by: urmum-69 <urmum69@snopyta.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Long options handling (getopt32 vs getopt32long) is done in libbb.h, no need to
care here of the same logic. This cleans the code a bit.
Also, --no-create was grouped as a SUSv3 option, where as the short -c was not.
Even if it is part of SUS, leave it out as was the short option.
v2: Fix for disabled ENABLE_LONG_OPTS. getopt32long does not like
IF_FEATURE_xxx() style conditionals... :/
Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using a file's times as reference, use both atime and mtime for the files
to be modified.
Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add missing -a and -m options to be fully SUSv3 compliant.
function old new delta
touch_main 415 510 +95
packed_usage 33824 33865 +41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 136/0) Total: 136 bytes
v2: Ignore -a/-m if not ENABLE_FEATURE_TOUCH_SUSV3.
Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fix tab completion for the path when equal sign (=) is used. For
example: dd if=/dev/ze<tab>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Traditional vi is mostly silent about the results of yank, delete,
change, undo or substitution commands. Vim reports some details
about undo and substitution. BusyBox vi is positively verbose in
comparison.
Make some improvements to BusyBox vi:
- Add vim-like reporting of changes caused by substitutions, of
the form '64 substitutions on 53 lines'. This replaces a fairly
useless report of the result of the last change made.
- Ensure that the report about put operations correctly reflects the
newly introduced repetition count.
- Commit 25d2592640 tried to limit status updates for delete and
yank operations by detecting whether the register had changed.
This didn't always work because the previously allocated memory
could be reused for the new register contents. Fix this by
delaying freeing the old register until after the new one has
been allocated.
- Add a configuration option to control verbose status reporting.
This is on by default. Turning it off make BusyBox vi as taciturn
as traditional vi and saves 435 bytes.
function old new delta
colon 3212 3292 +80
yank_status - 74 +74
static.text_yank 99 86 -13
string_insert 130 76 -54
do_cmd 4842 4776 -66
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 154/-133) Total: 21 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When a search for a character within a line fails issue a warning.
function old new delta
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0) Total: 0 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Make the ':s/find/replace/g' command behave more like vi:
- the final delimiter is optional if no flag is specified;
- the cursor is moved to the first visible character of the last
line where a substitution was made;
- a warning is displayed if no substitution was made.
function old new delta
colon 3156 3212 +56
.rodata 105133 105142 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 65/0) Total: 65 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Make the put commands 'p' and 'P' behave more like vi:
- allow a repetition count to be specified;
- when the text being inserted doesn't include a newline the cursor
should be positioned at the end of the inserted text.
function old new delta
do_cmd 4765 4842 +77
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 77/0) Total: 77 bytes
v2: Don't break build when FEATURE_VI_UNDO is disabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The '.' command repeats the last text change. When it has a
repetition count replay the change the number of times requested.
Update the stored count if it changes. For example,
3dw deletes 3 words
. deletes another 3 words
2. deletes 2 words and changes the stored count
. deletes 2 words
function old new delta
do_cmd 4746 4781 +35
.rodata 105133 105138 +5
edit_file 887 849 -38
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 40/-38) Total: 2 bytes
v2: Change implementation to include repetition count in string.
Otherwise repeating 'r' doesn't work properly.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Make the 'r' command behave more like vi:
- abort the command if ESC is entered after the 'r';
- allow a repeat count to be entered before the 'r';
- if the repeat count exceeds the space available on the line don't
change any characters and issue an alert.
function old new delta
do_cmd 4679 4746 +67
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 67/0) Total: 67 bytes
v2: Don't break build when FEATURE_VI_UNDO is disabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The left shift operator ('<') didn't support undo at all; right
shift ('>') required changes to be undone separately for each line.
Allow both types of shift to be undone as a single operation.
Also, neither traditional vi nor vim yank the lines being shifted by
the '<' and '>' commands, so remove that call to yank_delete();
When a repetition count was specified for the '~', 'x', 'X' or 's'
commands the changes had to be undone one character at a time.
Allow undo as a single operation (though the delete and change
parts of the 's' command still have to be undone separately).
function old new delta
undo_push_insert 37 40 +3
do_cmd 4695 4663 -32
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-32) Total: -29 bytes
v2: Don't break build when FEATURE_VI_UNDO is disabled. Don't reset
'undo_del' too early in '~' handling code. Code shrink '~'.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
